void ForwMachine::connect_FWT(TalkConnection * tcCaller)
{
/** FWT : This is the method in which we take the connection to both
* clients and send each character received from one side to the other
* side. This allows to pass a firewall for instance. */
message("-- connect_FWT : Waiting for connection from Answerer (%s)", answ_user);
if (tcAnsw->accept())
{
message("-- connect_FWT : Trying to connect to Caller (%s)",caller_username);
if (tcCaller->connect())
{
message("-- connect_FWT : Connected to caller (%s)", caller_username);
message("-- connect_FWT : Connected to both. Let's go");
int socktC = tcCaller->get_sockt();
int socktA = tcAnsw->get_sockt();
int max_sockt = (socktC>socktA) ? socktC : socktA;
unsigned char buf[BUFSIZ];
fd_set read_mask;
int nb;
int nbtot = 0;
for (;;) {
FD_ZERO(&read_mask);
FD_SET(socktA, &read_mask); // wait on both connections
FD_SET(socktC, &read_mask);
nb = select(max_sockt+1, &read_mask, NULL, NULL, NULL); // no timeout
if (nb <= 0) {
if (errno == EINTR) {
continue;
}
/* panic, we don't know what happened */
TalkConnection::p_error("Unexpected error from select");
}
if (FD_ISSET(socktA, &read_mask)) {
/* There is data on sockt A */
nb = transmit_chars(socktA, socktC, buf);
if (nb==0) return ;
}
if (FD_ISSET(socktC, &read_mask)) {
/* There is data on sockt C */
nb = transmit_chars(socktC, socktA, buf);
if (nb==0) return ;
nbtot += nb;
if (nbtot == 3) // just after the 3 edit chars
{
struct hostent * hp = gethostbyaddr((char *)&caller_machine_addr,
sizeof (struct in_addr), AF_INET);
if (hp != (struct hostent *)0) {
// Write first line for answerer.
// i18n() missing
sprintf((char *)buf, "Speaking to %s@%s\n", caller_username, hp->h_name);
write(socktA, (char *)buf, strlen((char *)buf));
} else message("-- ERROR : Unable to resolve caller_machine_addr !");
}
}
} // for
} else syslog(LOG_ERR,"-- FWT : Caller connected, but not answerer !");
} else syslog(LOG_ERR,"-- FWT : Caller did not connect !");
}
static void sci_tx_interrupt(int irq, void *dev_id, struct pt_regs * regs)
{
int ch;
for(ch=0;ch<NR_PORTS;ch++)
if(rs_table[ch].irq+2==irq)
transmit_chars(&rs_table[ch]);
}
void rs_interrupt(int irq, void * dev_id, struct pt_regs * regs)
{
char status;
struct cnxt_serial * info = &uart_info;
struct uart_regs *uart = uart_info.uart;
status = (uart->iir & 0x0f); /* only concerned w/ lower nibble */
if (status == ISR_Tx_Rdy_Source) {
transmit_chars(info);
}
if ((status == ISR_Rx_Rdy_Source) ||
(status == ISR_Rx_Rdy_TO_Src )){
receive_chars(info,status);
}
#if 0
if(!info->use_ints){
serialpoll.data = (void *)&sp_uart_info;
queue_task_irq_off(&serialpoll, &tq_timer);
}
#endif
return;
}
/**
* serial_omap_irq() - This handles the interrupt from one port
* @irq: uart port irq number
* @dev_id: uart port info
*/
static inline irqreturn_t serial_omap_irq(int irq, void *dev_id)
{
struct uart_omap_port *up = dev_id;
unsigned int iir, lsr;
unsigned long flags;
iir = serial_in(up, UART_IIR);
if (iir & UART_IIR_NO_INT)
return IRQ_NONE;
spin_lock_irqsave(&up->port.lock, flags);
lsr = serial_in(up, UART_LSR);
if (iir & UART_IIR_RLSI) {
if (!up->use_dma) {
if (lsr & UART_LSR_DR)
receive_chars(up, &lsr);
} else {
up->ier &= ~(UART_IER_RDI | UART_IER_RLSI);
serial_out(up, UART_IER, up->ier);
if ((serial_omap_start_rxdma(up) != 0) &&
(lsr & UART_LSR_DR))
receive_chars(up, &lsr);
}
}
check_modem_status(up);
if ((lsr & UART_LSR_THRE) && (iir & UART_IIR_THRI))
transmit_chars(up);
spin_unlock_irqrestore(&up->port.lock, flags);
up->port_activity = jiffies;
return IRQ_HANDLED;
}
kern_return_t
serial_write_reply(char *handle, kern_return_t return_code,
char *data, unsigned int data_count)
{
struct async_struct *info = (struct async_struct *) handle;
info->write_busy = FALSE;
if (info->tty == NULL) /* Lost tty.. */
return KERN_SUCCESS;
/* TODO -- maybe handle errors some how? */
if (return_code != KERN_SUCCESS) {
MACH3_DEBUG(1, return_code,
("serial_write_reply failed: %d", return_code));
} else {
info->xmit_tail += data_count;
info->xmit_tail &= SERIAL_XMIT_SIZE-1;
info->xmit_cnt -= data_count;
}
transmit_chars(info); /* Transmit next block .. */
return KERN_SUCCESS;
}
/*
* This is the serial driver's generic interrupt routine
*/
irqreturn_t rs_interrupt(int irq, void *dev_id)
{
struct m68k_serial *info = dev_id;
struct tty_struct *tty = tty_port_tty_get(&info->tport);
m68328_uart *uart;
unsigned short rx;
unsigned short tx;
uart = &uart_addr[info->line];
rx = uart->urx.w;
#ifdef USE_INTS
tx = uart->utx.w;
if (rx & URX_DATA_READY)
receive_chars(info, rx);
if (tx & UTX_TX_AVAIL)
transmit_chars(info, tty);
#else
receive_chars(info, rx);
#endif
tty_kref_put(tty);
return IRQ_HANDLED;
}
static int rs_write(struct tty_struct * tty,
const unsigned char *buf, int count)
{
struct serial_state *info = tty->driver_data;
int c, ret = 0;
unsigned long flags;
if (!info->xmit.buf)
return 0;
local_irq_save(flags);
while (1) {
c = CIRC_SPACE_TO_END(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
if (count < c)
c = count;
if (c <= 0) {
break;
}
memcpy(info->xmit.buf + info->xmit.head, buf, c);
info->xmit.head = ((info->xmit.head + c) &
(SERIAL_XMIT_SIZE-1));
buf += c;
count -= c;
ret += c;
}
local_irq_restore(flags);
/*
* Hey, we transmit directly from here in our case
*/
if (CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE) &&
!tty->stopped && !tty->hw_stopped)
transmit_chars(tty, info, NULL);
return ret;
}
static void rs_interrupt_elsa(struct IsdnCardState *cs)
{
int status, iir, msr;
int pass_counter = 0;
#ifdef SERIAL_DEBUG_INTR
;
#endif
do {
status = serial_inp(cs, UART_LSR);
debugl1(cs,"rs LSR %02x", status);
#ifdef SERIAL_DEBUG_INTR
;
#endif
if (status & UART_LSR_DR)
receive_chars(cs, &status);
if (status & UART_LSR_THRE)
transmit_chars(cs, NULL);
if (pass_counter++ > RS_ISR_PASS_LIMIT) {
;
break;
}
iir = serial_inp(cs, UART_IIR);
debugl1(cs,"rs IIR %02x", iir);
if ((iir & 0xf) == 0) {
msr = serial_inp(cs, UART_MSR);
debugl1(cs,"rs MSR %02x", msr);
}
} while (!(iir & UART_IIR_NO_INT));
#ifdef SERIAL_DEBUG_INTR
;
#endif
}
/*
* This handles the interrupt from one port.
*/
static inline irqreturn_t serial_omap_irq(int irq, void *dev_id)
{
struct uart_omap_port *up = dev_id;
unsigned int iir, lsr;
iir = serial_in(up, UART_IIR);
if (iir & UART_IIR_NO_INT)
return IRQ_NONE;
lsr = serial_in(up, UART_LSR);
if ((iir & 0x4) && up->use_dma) {
up->ier &= ~UART_IER_RDI;
serial_out(up, UART_IER, up->ier);
serial_omap_start_rxdma(up);
}
else if (lsr & UART_LSR_DR) {
receive_chars(up, &lsr);
}
check_modem_status(up);
if ((lsr & UART_LSR_THRE) && (iir & 0x2)) {
transmit_chars(up);
}
isr8250_activity = jiffies;
return IRQ_HANDLED;
}
/*
* This is the serial driver's generic interrupt routine
*/
static irqreturn_t am_uart_interrupt(int irq, void *dev, struct pt_regs *regs)
{
struct am_uart_port *info=(struct am_uart_port *)dev;
am_uart_t *uart = NULL;
struct tty_struct *tty = NULL;
if (!info)
goto out;
tty = info->port.state->port.tty;
if (!tty)
{
goto out;
}
uart = uart_addr[info->line];
if (!uart)
goto out;
if (!(readl(&uart->status) & UART_RXEMPTY)){
receive_chars(info, 0, readl(&uart->rdata));
}
if ((readl(&uart->mode) & UART_TXENB)&&!(readl(&uart->status) & UART_TXFULL)) {
transmit_chars(info);
}
out:
am_uart_sched_event(info, 0);
return IRQ_HANDLED;
}
/*
* This is the serial driver's generic interrupt routine
*/
void rs_interrupt(int irq, void *dev_id, struct pt_regs * regs)
{
struct m68k_serial * info;
m68328_uart *uart;
unsigned short rx;
#ifdef USE_INTS
unsigned short tx;
#endif
info = IRQ_ports[irq];
if(!info)
return;
uart = &uart_addr[info->line];
rx = uart->urx.w;
#ifdef USE_INTS
tx = uart->utx.w;
if (rx & URX_DATA_READY) receive_chars(info, regs, rx);
if (tx & UTX_TX_AVAIL) transmit_chars(info);
#else
receive_chars(info, regs, rx);
#endif
return;
}
/*
* This handles the interrupt from one port.
*/
static inline irqreturn_t serial_omap_irq(int irq, void *dev_id)
{
struct uart_omap_port *up = dev_id;
unsigned int iir, lsr;
iir = serial_in(up, UART_IIR);
if (iir & UART_IIR_NO_INT)
return IRQ_NONE;
lsr = serial_in(up, UART_LSR);
if ((iir & 0x4) && up->use_dma) {
up->ier &= ~UART_IER_RDI;
serial_out(up, UART_IER, up->ier);
serial_omap_start_rxdma(up);
} else if (lsr & UART_LSR_DR) {
receive_chars(up, &lsr);
/* XXX: After driver resume optimization, lower this */
wake_lock_timeout(&omap_serial_wakelock, (HZ * 1));
}
check_modem_status(up);
if ((lsr & UART_LSR_THRE) && (iir & 0x2))
transmit_chars(up);
isr8250_activity = jiffies;
return IRQ_HANDLED;
}
/**
* serial_omap_irq() - This handles the interrupt from one port
* @irq: uart port irq number
* @dev_id: uart port info
*/
static irqreturn_t serial_omap_irq(int irq, void *dev_id)
{
struct uart_omap_port *up = dev_id;
struct tty_struct *tty = up->port.state->port.tty;
unsigned int iir, lsr;
unsigned int type;
irqreturn_t ret = IRQ_NONE;
int max_count = 256;
spin_lock(&up->port.lock);
pm_runtime_get_sync(up->dev);
do {
iir = serial_in(up, UART_IIR);
if (iir & UART_IIR_NO_INT)
break;
ret = IRQ_HANDLED;
lsr = serial_in(up, UART_LSR);
/* extract IRQ type from IIR register */
type = iir & 0x3e;
switch (type) {
case UART_IIR_MSI:
check_modem_status(up);
break;
case UART_IIR_THRI:
transmit_chars(up, lsr);
break;
case UART_IIR_RX_TIMEOUT:
/* FALLTHROUGH */
case UART_IIR_RDI:
serial_omap_rdi(up, lsr);
break;
case UART_IIR_RLSI:
serial_omap_rlsi(up, lsr);
break;
case UART_IIR_CTS_RTS_DSR:
/* simply try again */
break;
case UART_IIR_XOFF:
/* FALLTHROUGH */
default:
break;
}
} while (!(iir & UART_IIR_NO_INT) && max_count--);
spin_unlock(&up->port.lock);
tty_flip_buffer_push(tty);
pm_runtime_mark_last_busy(up->dev);
pm_runtime_put_autosuspend(up->dev);
up->port_activity = jiffies;
return ret;
}
static irqreturn_t
dpram_irq_tx(int irq, void *dev_id)
{
dprintk("dpram_irq_tx\n");
dpram_ack1();
transmit_chars(dev_id);
return IRQ_HANDLED;
}
/*
* This is the serial driver's generic interrupt routine
*/
void rs_interrupt(int irq, void *dev_id, struct pt_regs * regs)
{
struct LEON_serial * info = &LEON_soft;
unsigned int stat = leon->uartstatus1;
if (stat & USTAT_DR) receive_chars(info, regs, stat);
if (stat & USTAT_TH) transmit_chars(info);
return;
}
/* static void rs_360_interrupt(void *dev_id) */ /* until and if we start servicing irqs here */
static void rs_360_interrupt(int vec, void *dev_id)
{
u_char events;
int idx;
ser_info_t *info;
volatile struct smc_regs *smcp;
volatile struct scc_regs *sccp;
info = dev_id;
idx = PORT_NUM(info->state->smc_scc_num);
if (info->state->smc_scc_num & NUM_IS_SCC) {
sccp = &pquicc->scc_regs[idx];
events = sccp->scc_scce;
if (events & SCCM_RX)
receive_chars(info);
if (events & SCCM_TX)
transmit_chars(info);
sccp->scc_scce = events;
} else {
smcp = &pquicc->smc_regs[idx];
events = smcp->smc_smce;
if (events & SMCM_BRKE)
receive_break(info);
if (events & SMCM_RX)
receive_chars(info);
if (events & SMCM_TX)
transmit_chars(info);
smcp->smc_smce = events;
}
#ifdef SERIAL_DEBUG_INTR
printk("rs_interrupt_single(%d, %x)...",
info->state->smc_scc_num, events);
#endif
#ifdef modem_control
check_modem_status(info);
#endif
info->last_active = jiffies;
#ifdef SERIAL_DEBUG_INTR
printk("end.\n");
#endif
}
/*
* This handles the interrupt from one port.
*/
static inline void m32r_sio_handle_port(struct uart_sio_port *up,
unsigned int status)
{
pr_debug("status = %x...\n", status);
if (status & 0x04)
receive_chars(up, &status);
if (status & 0x01)
transmit_chars(up);
}
static void rs_flush_chars(struct tty_struct *tty)
{
struct serial_state *info = tty->driver_data;
if (info->xmit.head == info->xmit.tail || tty->stopped ||
tty->hw_stopped || !info->xmit.buf)
return;
transmit_chars(tty, info, NULL);
}
/*
* This is the serial driver's generic interrupt routine
*/
void rs_interrupt(int irq, void *dev_id, struct pt_regs * regs)
{
struct NIOS_serial * info = (struct NIOS_serial *) dev_id;
np_uart * uart= (np_uart *)(info->port);
unsigned short stat = uart->np_uartstatus;
uart->np_uartstatus = 0; /* clear any error status */
if (stat & np_uartstatus_rrdy_mask) receive_chars(info, regs, stat);
if (stat & np_uartstatus_trdy_mask) transmit_chars(info);
return;
}
/**
* serial_omap_irq() - This handles the interrupt from one port
* @irq: uart port irq number
* @dev_id: uart port info
*/
static inline irqreturn_t serial_omap_irq(int irq, void *dev_id)
{
struct uart_omap_port *up = dev_id;
unsigned int iir, lsr;
unsigned long flags;
spin_lock_irqsave(&up->port.lock, flags);
#ifdef CONFIG_PM
/*
* This will enable the clock for some reason if the
* clocks get disabled. This would enable the ICK also
* in case if the Idle state is set and the PRCM modul
* just shutdown the ICK because of inactivity.
*/
omap_uart_enable_clock_from_irq(up->pdev->id);
#endif
iir = serial_in(up, UART_IIR);
if (iir & UART_IIR_NO_INT) {
spin_unlock_irqrestore(&up->port.lock, flags);
return IRQ_NONE;
}
lsr = serial_in(up, UART_LSR);
if (iir & UART_IIR_RLSI) {
if (!up->use_dma) {
if (lsr & UART_LSR_DR) {
receive_chars(up, &lsr);
if (omap_is_console_port(&up->port) &&
(up->plat_hold_wakelock)) {
spin_unlock(&up->port.lock);
up->plat_hold_wakelock(up, WAKELK_IRQ);
spin_lock(&up->port.lock);
}
}
} else {
up->ier &= ~UART_IER_RDI;
serial_out(up, UART_IER, up->ier);
if (serial_omap_start_rxdma(up) != 0)
if (lsr & UART_LSR_DR)
receive_chars(up, &lsr);
}
}
check_modem_status(up);
if ((lsr & UART_LSR_THRE) && (iir & UART_IIR_THRI))
transmit_chars(up);
spin_unlock_irqrestore(&up->port.lock, flags);
up->port_activity = jiffies;
return IRQ_HANDLED;
}
/*
* This function is used to send a high-priority XON/XOFF character to
* the device
*/
static void rs_send_xchar(struct tty_struct *tty, char ch)
{
struct serial_state *info = tty->driver_data;
info->x_char = ch;
if (ch) {
/*
* I guess we could call console->write() directly but
* let's do that for now.
*/
transmit_chars(tty, info, NULL);
}
}
/*
* This handles the interrupt from one port.
*/
static inline void
serial8250_handle_port(struct uart_8250_port *up, struct pt_regs *regs)
{
unsigned int status = serial_inp(up, UART_LSR);
DEBUG_INTR("status = %x...", status);
if (status & UART_LSR_DR)
receive_chars(up, &status, regs);
check_modem_status(up);
if (status & UART_LSR_THRE)
transmit_chars(up);
}
/*
* This is the serial driver's generic interrupt routine
*/
irqreturn_t mcfrs_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
struct mcf_serial *info;
unsigned char isr;
info = &mcfrs_table[(irq - IRQBASE)];
isr = info->addr[MCFUART_UISR] & info->imr;
if (isr & MCFUART_UIR_RXREADY)
receive_chars(info);
if (isr & MCFUART_UIR_TXREADY)
transmit_chars(info);
return IRQ_HANDLED;
}
/**
* serial_omap_irq() - This handles the interrupt from one port
* @irq: uart port irq number
* @dev_id: uart port info
*/
static inline irqreturn_t serial_omap_irq(int irq, void *dev_id)
{
struct uart_omap_port *up = dev_id;
unsigned int iir, lsr;
unsigned int int_id;
unsigned long flags;
int ret = IRQ_HANDLED;
u8 tx_fifo_lvl;
serial_omap_port_enable(up);
iir = serial_in(up, UART_IIR);
if (iir & UART_IIR_NO_INT) {
serial_omap_port_disable(up);
return IRQ_NONE;
}
int_id = iir & UART_OMAP_IIR_ID;
spin_lock_irqsave(&up->port.lock, flags);
lsr = serial_in(up, UART_LSR);
if (int_id == UART_IIR_RDI || int_id == UART_OMAP_IIR_RX_TIMEOUT ||
int_id == UART_IIR_RLSI) {
if (!up->use_dma) {
if (lsr & UART_LSR_DR)
receive_chars(up, &lsr);
} else {
up->ier &= ~(UART_IER_RDI | UART_IER_RLSI);
serial_out(up, UART_IER, up->ier);
if ((serial_omap_start_rxdma(up) != 0) &&
(lsr & UART_LSR_DR))
receive_chars(up, &lsr);
}
}
check_modem_status(up);
if (int_id == UART_IIR_THRI) {
tx_fifo_lvl = serial_in(up, UART_OMAP_TXFIFO_LVL);
if (lsr & UART_LSR_THRE || tx_fifo_lvl < up->port.fifosize)
transmit_chars(up, tx_fifo_lvl);
else
ret = IRQ_NONE;
}
spin_unlock_irqrestore(&up->port.lock, flags);
serial_omap_port_disable(up);
up->port_activity = jiffies;
return ret;
}
static irqreturn_t sc26xx_interrupt(int irq, void *dev_id)
{
struct uart_sc26xx_port *up = dev_id;
unsigned long flags;
bool push;
u8 isr;
spin_lock_irqsave(&up->port[0].lock, flags);
push = false;
isr = READ_SC(&up->port[0], ISR);
if (isr & ISR_TXRDYA)
transmit_chars(&up->port[0]);
if (isr & ISR_RXRDYA)
push = receive_chars(&up->port[0]);
spin_unlock(&up->port[0].lock);
if (push)
tty_flip_buffer_push(&up->port[0].state->port);
spin_lock(&up->port[1].lock);
push = false;
if (isr & ISR_TXRDYB)
transmit_chars(&up->port[1]);
if (isr & ISR_RXRDYB)
push = receive_chars(&up->port[1]);
spin_unlock_irqrestore(&up->port[1].lock, flags);
if (push)
tty_flip_buffer_push(&up->port[1].state->port);
return IRQ_HANDLED;
}
static irqreturn_t sc26xx_interrupt(int irq, void *dev_id)
{
struct uart_sc26xx_port *up = dev_id;
struct tty_struct *tty;
unsigned long flags;
u8 isr;
spin_lock_irqsave(&up->port[0].lock, flags);
tty = NULL;
isr = READ_SC(&up->port[0], ISR);
if (isr & ISR_TXRDYA)
transmit_chars(&up->port[0]);
if (isr & ISR_RXRDYA)
tty = receive_chars(&up->port[0]);
spin_unlock(&up->port[0].lock);
if (tty)
tty_flip_buffer_push(tty);
spin_lock(&up->port[1].lock);
tty = NULL;
if (isr & ISR_TXRDYB)
transmit_chars(&up->port[1]);
if (isr & ISR_RXRDYB)
tty = receive_chars(&up->port[1]);
spin_unlock_irqrestore(&up->port[1].lock, flags);
if (tty)
tty_flip_buffer_push(tty);
return IRQ_HANDLED;
}
/*
* ------------------------------------------------------------
* dz_interrupt ()
*
* this is the main interrupt routine for the DZ chip.
* It deals with the multiple ports.
* ------------------------------------------------------------
*/
static void dz_interrupt(int irq, void *dev, struct pt_regs *regs)
{
struct dz_serial *info;
unsigned short status;
/* get the reason why we just got an irq */
status = dz_in((struct dz_serial *) dev, DZ_CSR);
info = lines[LINE(status)]; /* re-arrange info the proper port */
if (status & DZ_RDONE)
receive_chars(info); /* the receive function */
if (status & DZ_TRDY)
transmit_chars(info);
}
/*
* This handles the interrupt from one port.
*/
static inline irqreturn_t serial_pxa_irq(int irq, void *dev_id)
{
struct uart_pxa_port *up = dev_id;
unsigned int iir, lsr;
iir = serial_in(up, UART_IIR);
if (iir & UART_IIR_NO_INT)
return IRQ_NONE;
lsr = serial_in(up, UART_LSR);
if (lsr & UART_LSR_DR)
receive_chars(up, &lsr);
check_modem_status(up);
if (lsr & UART_LSR_THRE)
transmit_chars(up);
return IRQ_HANDLED;
}
static void rs_flush_chars(struct tty_struct *tty)
{
struct async_struct *info = (struct async_struct *)tty->driver_data;
unsigned long flags;
if (serial_paranoia_check(info, tty->device, "rs_flush_chars"))
return;
if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
!info->xmit_buf)
return;
save_flags(flags); cli();
transmit_chars(info);
restore_flags(flags);
}
static irqreturn_t ser_tx_int(int irq, void *dev_id)
{
struct serial_state *info = dev_id;
if (custom.serdatr & SDR_TBE) {
#ifdef SERIAL_DEBUG_INTR
printk("ser_tx_int...");
#endif
if (!info->tport.tty)
return IRQ_NONE;
transmit_chars(info);
#ifdef SERIAL_DEBUG_INTR
printk("end.\n");
#endif
}
return IRQ_HANDLED;
}