/*
* Function name: twa_attach
* Description: Allocates pci resources; updates sc; adds a node to the
* sysctl tree to expose the driver version; makes calls
* (to the Common Layer) to initialize ctlr, and to
* attach to CAM.
*
* Input: dev -- bus device corresponding to the ctlr
* Output: None
* Return value: 0 -- success
* non-zero-- failure
*/
static TW_INT32
twa_attach(device_t dev)
{
struct twa_softc *sc = device_get_softc(dev);
TW_UINT32 command;
TW_INT32 bar_num;
TW_INT32 bar0_offset;
TW_INT32 bar_size;
TW_INT32 error;
tw_osli_dbg_dprintf(3, sc, "entered");
sc->ctlr_handle.osl_ctlr_ctxt = sc;
/* Initialize the softc structure. */
sc->bus_dev = dev;
sc->device_id = pci_get_device(dev);
/* Initialize the mutexes right here. */
sc->io_lock = &(sc->io_lock_handle);
mtx_init(sc->io_lock, "tw_osl_io_lock", NULL, MTX_SPIN);
sc->q_lock = &(sc->q_lock_handle);
mtx_init(sc->q_lock, "tw_osl_q_lock", NULL, MTX_SPIN);
sc->sim_lock = &(sc->sim_lock_handle);
mtx_init(sc->sim_lock, "tw_osl_sim_lock", NULL, MTX_DEF | MTX_RECURSE);
sysctl_ctx_init(&sc->sysctl_ctxt);
sc->sysctl_tree = SYSCTL_ADD_NODE(&sc->sysctl_ctxt,
SYSCTL_STATIC_CHILDREN(_hw), OID_AUTO,
device_get_nameunit(dev), CTLFLAG_RD, 0, "");
if (sc->sysctl_tree == NULL) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2000,
"Cannot add sysctl tree node",
ENXIO);
return(ENXIO);
}
SYSCTL_ADD_STRING(&sc->sysctl_ctxt, SYSCTL_CHILDREN(sc->sysctl_tree),
OID_AUTO, "driver_version", CTLFLAG_RD,
TW_OSL_DRIVER_VERSION_STRING, 0, "TWA driver version");
/* Make sure we are going to be able to talk to this board. */
command = pci_read_config(dev, PCIR_COMMAND, 2);
if ((command & PCIM_CMD_PORTEN) == 0) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2001,
"Register window not available",
ENXIO);
tw_osli_free_resources(sc);
return(ENXIO);
}
/* Force the busmaster enable bit on, in case the BIOS forgot. */
command |= PCIM_CMD_BUSMASTEREN;
pci_write_config(dev, PCIR_COMMAND, command, 2);
/* Allocate the PCI register window. */
if ((error = tw_cl_get_pci_bar_info(sc->device_id, TW_CL_BAR_TYPE_MEM,
&bar_num, &bar0_offset, &bar_size))) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x201F,
"Can't get PCI BAR info",
error);
tw_osli_free_resources(sc);
return(error);
}
sc->reg_res_id = PCIR_BARS + bar0_offset;
if ((sc->reg_res = bus_alloc_resource(dev, SYS_RES_MEMORY,
&(sc->reg_res_id), 0, ~0, 1, RF_ACTIVE))
== NULL) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2002,
"Can't allocate register window",
ENXIO);
tw_osli_free_resources(sc);
return(ENXIO);
}
sc->bus_tag = rman_get_bustag(sc->reg_res);
sc->bus_handle = rman_get_bushandle(sc->reg_res);
/* Allocate and register our interrupt. */
sc->irq_res_id = 0;
if ((sc->irq_res = bus_alloc_resource(sc->bus_dev, SYS_RES_IRQ,
&(sc->irq_res_id), 0, ~0, 1,
RF_SHAREABLE | RF_ACTIVE)) == NULL) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2003,
"Can't allocate interrupt",
ENXIO);
tw_osli_free_resources(sc);
return(ENXIO);
}
if ((error = twa_setup_intr(sc))) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2004,
"Can't set up interrupt",
error);
tw_osli_free_resources(sc);
return(error);
}
if ((error = tw_osli_alloc_mem(sc))) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2005,
"Memory allocation failure",
error);
tw_osli_free_resources(sc);
return(error);
}
/* Initialize the Common Layer for this controller. */
if ((error = tw_cl_init_ctlr(&sc->ctlr_handle, sc->flags, sc->device_id,
TW_OSLI_MAX_NUM_REQUESTS, TW_OSLI_MAX_NUM_AENS,
sc->non_dma_mem, sc->dma_mem,
sc->dma_mem_phys
))) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2006,
"Failed to initialize Common Layer/controller",
error);
tw_osli_free_resources(sc);
return(error);
}
/* Create the control device. */
sc->ctrl_dev = make_dev(&twa_cdevsw, device_get_unit(sc->bus_dev),
UID_ROOT, GID_OPERATOR, S_IRUSR | S_IWUSR,
"twa%d", device_get_unit(sc->bus_dev));
sc->ctrl_dev->si_drv1 = sc;
if ((error = tw_osli_cam_attach(sc))) {
tw_osli_free_resources(sc);
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2007,
"Failed to initialize CAM",
error);
return(error);
}
sc->watchdog_index = 0;
callout_init(&(sc->watchdog_callout[0]), CALLOUT_MPSAFE);
callout_init(&(sc->watchdog_callout[1]), CALLOUT_MPSAFE);
callout_reset(&(sc->watchdog_callout[0]), 5*hz, twa_watchdog, &sc->ctlr_handle);
return(0);
}
/*
* Function name: twa_attach
* Description: Allocates pci resources; updates sc; adds a node to the
* sysctl tree to expose the driver version; makes calls
* (to the Common Layer) to initialize ctlr, and to
* attach to CAM.
*
* Input: dev -- bus device corresponding to the ctlr
* Output: None
* Return value: 0 -- success
* non-zero-- failure
*/
static TW_INT32
twa_attach(device_t dev)
{
struct twa_softc *sc = device_get_softc(dev);
TW_INT32 bar_num;
TW_INT32 bar0_offset;
TW_INT32 bar_size;
TW_INT32 irq_flags;
TW_INT32 error;
sc->ctlr_handle.osl_ctlr_ctxt = sc;
/* Initialize the softc structure. */
sc->bus_dev = dev;
tw_osli_dbg_dprintf(3, sc, "entered");
sc->device_id = pci_get_device(dev);
/* Initialize the mutexes right here. */
sc->io_lock = &(sc->io_lock_handle);
spin_init(sc->io_lock, "twa_iolock");
sc->q_lock = &(sc->q_lock_handle);
spin_init(sc->q_lock, "twa_qlock");
sc->sim_lock = &(sc->sim_lock_handle);
lockinit(sc->sim_lock, "tw_osl_sim_lock", 0, LK_CANRECURSE);
SYSCTL_ADD_STRING(device_get_sysctl_ctx(dev),
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
OID_AUTO, "driver_version", CTLFLAG_RD,
TW_OSL_DRIVER_VERSION_STRING, 0, "TWA driver version");
/* Force the busmaster enable bit on, in case the BIOS forgot. */
pci_enable_busmaster(dev);
/* Allocate the PCI register window. */
if ((error = tw_cl_get_pci_bar_info(sc->device_id, TW_CL_BAR_TYPE_MEM,
&bar_num, &bar0_offset, &bar_size))) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x201F,
"Can't get PCI BAR info",
error);
tw_osli_free_resources(sc);
return(error);
}
sc->reg_res_id = PCIR_BARS + bar0_offset;
if ((sc->reg_res = bus_alloc_resource(dev, SYS_RES_MEMORY,
&(sc->reg_res_id), 0, ~0, 1, RF_ACTIVE))
== NULL) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2002,
"Can't allocate register window",
ENXIO);
tw_osli_free_resources(sc);
return(ENXIO);
}
sc->bus_tag = rman_get_bustag(sc->reg_res);
sc->bus_handle = rman_get_bushandle(sc->reg_res);
/* Allocate and register our interrupt. */
sc->irq_res_id = 0;
sc->irq_type = pci_alloc_1intr(sc->bus_dev, twa_msi_enable,
&sc->irq_res_id, &irq_flags);
if ((sc->irq_res = bus_alloc_resource(sc->bus_dev, SYS_RES_IRQ,
&(sc->irq_res_id), 0, ~0, 1,
irq_flags)) == NULL) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2003,
"Can't allocate interrupt",
ENXIO);
tw_osli_free_resources(sc);
return(ENXIO);
}
if ((error = twa_setup_intr(sc))) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2004,
"Can't set up interrupt",
error);
tw_osli_free_resources(sc);
return(error);
}
if ((error = tw_osli_alloc_mem(sc))) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2005,
"Memory allocation failure",
error);
tw_osli_free_resources(sc);
return(error);
}
/* Initialize the Common Layer for this controller. */
if ((error = tw_cl_init_ctlr(&sc->ctlr_handle, sc->flags, sc->device_id,
TW_OSLI_MAX_NUM_REQUESTS, TW_OSLI_MAX_NUM_AENS,
sc->non_dma_mem, sc->dma_mem,
sc->dma_mem_phys
))) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2006,
"Failed to initialize Common Layer/controller",
error);
tw_osli_free_resources(sc);
return(error);
}
/* Create the control device. */
sc->ctrl_dev = make_dev(&twa_ops, device_get_unit(sc->bus_dev),
UID_ROOT, GID_OPERATOR, S_IRUSR | S_IWUSR,
"twa%d", device_get_unit(sc->bus_dev));
sc->ctrl_dev->si_drv1 = sc;
if ((error = tw_osli_cam_attach(sc))) {
tw_osli_free_resources(sc);
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2007,
"Failed to initialize CAM",
error);
return(error);
}
sc->watchdog_index = 0;
callout_init_mp(&(sc->watchdog_callout[0]));
callout_init_mp(&(sc->watchdog_callout[1]));
callout_reset(&(sc->watchdog_callout[0]), 5*hz, twa_watchdog, &sc->ctlr_handle);
return(0);
}
