int
ucomclose(dev_t dev, int flag, int mode, struct proc *p)
{
struct ucom_softc *sc = ucom_cd.cd_devs[UCOMUNIT(dev)];
struct tty *tp = sc->sc_tty;
int s;
if (!ISSET(tp->t_state, TS_ISOPEN))
return (0);
DPRINTF(("ucomclose: unit=%d\n", UCOMUNIT(dev)));
ucom_lock(sc);
(*LINESW(tp, l_close))(tp, flag);
s = spltty();
CLR(tp->t_state, TS_BUSY | TS_FLUSH);
sc->sc_cua = 0;
ttyclose(tp);
ucom_cleanup(sc);
splx(s);
if (sc->sc_methods->ucom_close != NULL)
sc->sc_methods->ucom_close(sc->sc_parent, sc->sc_portno);
ucom_unlock(sc);
return (0);
}
static int
ucomclose(dev_t dev, int flag, int mode, usb_proc_ptr p)
{
struct ucom_softc *sc;
struct tty *tp;
int s;
USB_GET_SC(ucom, UCOMUNIT(dev), sc);
tp = sc->sc_tty;
DPRINTF(("%s: ucomclose: unit = %d\n",
USBDEVNAME(sc->sc_dev), UCOMUNIT(dev)));
if (!ISSET(tp->t_state, TS_ISOPEN))
goto quit;
s = spltty();
(*linesw[tp->t_line].l_close)(tp, flag);
disc_optim(tp, &tp->t_termios, sc);
ttyclose(tp);
splx(s);
if (sc->sc_dying)
goto quit;
if (!ISSET(tp->t_state, TS_ISOPEN)) {
/*
* Although we got a last close, the device may still be in
* use; e.g. if this was the dialout node, and there are still
* processes waiting for carrier on the non-dialout node.
*/
ucom_cleanup(sc);
}
if (sc->sc_callback->ucom_close != NULL)
sc->sc_callback->ucom_close(sc->sc_parent, sc->sc_portno);
quit:
if (--sc->sc_refcnt < 0)
usb_detach_wakeup(USBDEV(sc->sc_dev));
return (0);
}
int
ucomclose(dev_t dev, int flag, int mode, struct lwp *l)
{
struct ucom_softc *sc = device_lookup_private(&ucom_cd, UCOMUNIT(dev));
struct tty *tp;
int s;
DPRINTF(("ucomclose: unit=%d\n", UCOMUNIT(dev)));
if (sc == NULL)
return 0;
tp = sc->sc_tty;
if (!ISSET(tp->t_state, TS_ISOPEN))
return (0);
s = spltty();
sc->sc_refcnt++;
(*tp->t_linesw->l_close)(tp, flag);
ttyclose(tp);
if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) {
/*
* Although we got a last close, the device may still be in
* use; e.g. if this was the dialout node, and there are still
* processes waiting for carrier on the non-dialout node.
*/
ucom_cleanup(sc);
}
if (sc->sc_methods->ucom_close != NULL)
sc->sc_methods->ucom_close(sc->sc_parent, sc->sc_portno);
if (--sc->sc_refcnt < 0)
usb_detach_wakeupold(sc->sc_dev);
splx(s);
return (0);
}
int
ucomopen(dev_t dev, int flag, int mode, struct lwp *l)
{
int unit = UCOMUNIT(dev);
usbd_status err;
struct ucom_softc *sc = device_lookup_private(&ucom_cd, unit);
struct ucom_buffer *ub;
struct tty *tp;
int s, i;
int error;
if (sc == NULL)
return (ENXIO);
if (sc->sc_dying)
return (EIO);
if (!device_is_active(sc->sc_dev))
return (ENXIO);
tp = sc->sc_tty;
DPRINTF(("ucomopen: unit=%d, tp=%p\n", unit, tp));
if (kauth_authorize_device_tty(l->l_cred, KAUTH_DEVICE_TTY_OPEN, tp))
return (EBUSY);
s = spltty();
/*
* Do the following iff this is a first open.
*/
while (sc->sc_opening)
tsleep(&sc->sc_opening, PRIBIO, "ucomop", 0);
if (sc->sc_dying) {
splx(s);
return (EIO);
}
sc->sc_opening = 1;
if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) {
struct termios t;
tp->t_dev = dev;
if (sc->sc_methods->ucom_open != NULL) {
error = sc->sc_methods->ucom_open(sc->sc_parent,
sc->sc_portno);
if (error) {
ucom_cleanup(sc);
sc->sc_opening = 0;
wakeup(&sc->sc_opening);
splx(s);
return (error);
}
}
ucom_status_change(sc);
/*
* Initialize the termios status to the defaults. Add in the
* sticky bits from TIOCSFLAGS.
*/
t.c_ispeed = 0;
t.c_ospeed = TTYDEF_SPEED;
t.c_cflag = TTYDEF_CFLAG;
if (ISSET(sc->sc_swflags, TIOCFLAG_CLOCAL))
SET(t.c_cflag, CLOCAL);
if (ISSET(sc->sc_swflags, TIOCFLAG_CRTSCTS))
SET(t.c_cflag, CRTSCTS);
if (ISSET(sc->sc_swflags, TIOCFLAG_MDMBUF))
SET(t.c_cflag, MDMBUF);
/* Make sure ucomparam() will do something. */
tp->t_ospeed = 0;
(void) ucomparam(tp, &t);
tp->t_iflag = TTYDEF_IFLAG;
tp->t_oflag = TTYDEF_OFLAG;
tp->t_lflag = TTYDEF_LFLAG;
ttychars(tp);
ttsetwater(tp);
/*
* Turn on DTR. We must always do this, even if carrier is not
* present, because otherwise we'd have to use TIOCSDTR
* immediately after setting CLOCAL, which applications do not
* expect. We always assert DTR while the device is open
* unless explicitly requested to deassert it. Ditto RTS.
*/
ucom_dtr(sc, 1);
ucom_rts(sc, 1);
DPRINTF(("ucomopen: open pipes in=%d out=%d\n",
sc->sc_bulkin_no, sc->sc_bulkout_no));
/* Open the bulk pipes */
err = usbd_open_pipe(sc->sc_iface, sc->sc_bulkin_no,
USBD_EXCLUSIVE_USE, &sc->sc_bulkin_pipe);
if (err) {
DPRINTF(("%s: open bulk in error (addr %d), err=%s\n",
USBDEVNAME(sc->sc_dev), sc->sc_bulkin_no,
usbd_errstr(err)));
error = EIO;
goto fail_0;
}
err = usbd_open_pipe(sc->sc_iface, sc->sc_bulkout_no,
USBD_EXCLUSIVE_USE, &sc->sc_bulkout_pipe);
if (err) {
DPRINTF(("%s: open bulk out error (addr %d), err=%s\n",
USBDEVNAME(sc->sc_dev), sc->sc_bulkout_no,
usbd_errstr(err)));
error = EIO;
goto fail_1;
}
sc->sc_rx_unblock = 0;
sc->sc_rx_stopped = 0;
sc->sc_tx_stopped = 0;
memset(sc->sc_ibuff, 0, sizeof(sc->sc_ibuff));
memset(sc->sc_obuff, 0, sizeof(sc->sc_obuff));
SIMPLEQ_INIT(&sc->sc_ibuff_empty);
SIMPLEQ_INIT(&sc->sc_ibuff_full);
SIMPLEQ_INIT(&sc->sc_obuff_free);
SIMPLEQ_INIT(&sc->sc_obuff_full);
/* Allocate input buffers */
for (ub = &sc->sc_ibuff[0]; ub != &sc->sc_ibuff[UCOM_IN_BUFFS];
ub++) {
ub->ub_xfer = usbd_alloc_xfer(sc->sc_udev);
if (ub->ub_xfer == NULL) {
error = ENOMEM;
goto fail_2;
}
ub->ub_data = usbd_alloc_buffer(ub->ub_xfer,
sc->sc_ibufsizepad);
if (ub->ub_data == NULL) {
error = ENOMEM;
goto fail_2;
}
if (ucomsubmitread(sc, ub) != USBD_NORMAL_COMPLETION) {
error = EIO;
goto fail_2;
}
}
for (ub = &sc->sc_obuff[0]; ub != &sc->sc_obuff[UCOM_OUT_BUFFS];
ub++) {
ub->ub_xfer = usbd_alloc_xfer(sc->sc_udev);
if (ub->ub_xfer == NULL) {
error = ENOMEM;
goto fail_2;
}
ub->ub_data = usbd_alloc_buffer(ub->ub_xfer,
sc->sc_obufsize);
if (ub->ub_data == NULL) {
error = ENOMEM;
goto fail_2;
}
SIMPLEQ_INSERT_TAIL(&sc->sc_obuff_free, ub, ub_link);
}
}
sc->sc_opening = 0;
wakeup(&sc->sc_opening);
splx(s);
error = ttyopen(tp, UCOMDIALOUT(dev), ISSET(flag, O_NONBLOCK));
if (error)
goto bad;
error = (*tp->t_linesw->l_open)(dev, tp);
if (error)
goto bad;
return (0);
fail_2:
usbd_abort_pipe(sc->sc_bulkin_pipe);
for (i = 0; i < UCOM_IN_BUFFS; i++) {
if (sc->sc_ibuff[i].ub_xfer != NULL) {
usbd_free_xfer(sc->sc_ibuff[i].ub_xfer);
sc->sc_ibuff[i].ub_xfer = NULL;
sc->sc_ibuff[i].ub_data = NULL;
}
}
usbd_abort_pipe(sc->sc_bulkout_pipe);
for (i = 0; i < UCOM_OUT_BUFFS; i++) {
if (sc->sc_obuff[i].ub_xfer != NULL) {
usbd_free_xfer(sc->sc_obuff[i].ub_xfer);
sc->sc_obuff[i].ub_xfer = NULL;
sc->sc_obuff[i].ub_data = NULL;
}
}
usbd_close_pipe(sc->sc_bulkout_pipe);
sc->sc_bulkout_pipe = NULL;
fail_1:
usbd_close_pipe(sc->sc_bulkin_pipe);
sc->sc_bulkin_pipe = NULL;
fail_0:
sc->sc_opening = 0;
wakeup(&sc->sc_opening);
splx(s);
return (error);
bad:
s = spltty();
CLR(tp->t_state, TS_BUSY);
if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) {
/*
* We failed to open the device, and nobody else had it opened.
* Clean up the state as appropriate.
*/
ucom_cleanup(sc);
}
splx(s);
return (error);
}
int
ucomopen(dev_t dev, int flag, int mode, struct proc *p)
{
int unit = UCOMUNIT(dev);
usbd_status err;
struct ucom_softc *sc;
struct tty *tp;
struct termios t;
int s;
int error;
if (unit >= ucom_cd.cd_ndevs)
return (ENXIO);
sc = ucom_cd.cd_devs[unit];
if (sc == NULL)
return (ENXIO);
if (sc->sc_dying)
return (EIO);
if (ISSET(sc->sc_dev.dv_flags, DVF_ACTIVE) == 0)
return (ENXIO);
/* open the pipes if this is the first open */
ucom_lock(sc);
if (sc->sc_open++ == 0) {
s = splusb();
DPRINTF(("ucomopen: open pipes in=%d out=%d\n",
sc->sc_bulkin_no, sc->sc_bulkout_no));
DPRINTF(("ucomopen: hid %p pipes in=%p out=%p\n",
sc->sc_uhidev, sc->sc_ipipe, sc->sc_opipe));
if (sc->sc_bulkin_no != -1) {
/* Open the bulk pipes */
err = usbd_open_pipe(sc->sc_iface, sc->sc_bulkin_no, 0,
&sc->sc_bulkin_pipe);
if (err) {
DPRINTF(("%s: open bulk out error (addr %d), err=%s\n",
sc->sc_dev.dv_xname, sc->sc_bulkin_no,
usbd_errstr(err)));
error = EIO;
goto fail_0;
}
err = usbd_open_pipe(sc->sc_iface, sc->sc_bulkout_no,
USBD_EXCLUSIVE_USE, &sc->sc_bulkout_pipe);
if (err) {
DPRINTF(("%s: open bulk in error (addr %d), err=%s\n",
sc->sc_dev.dv_xname, sc->sc_bulkout_no,
usbd_errstr(err)));
error = EIO;
goto fail_1;
}
/* Allocate a request and an input buffer and start reading. */
sc->sc_ixfer = usbd_alloc_xfer(sc->sc_udev);
if (sc->sc_ixfer == NULL) {
error = ENOMEM;
goto fail_2;
}
sc->sc_ibuf = usbd_alloc_buffer(sc->sc_ixfer,
sc->sc_ibufsizepad);
if (sc->sc_ibuf == NULL) {
error = ENOMEM;
goto fail_2;
}
sc->sc_oxfer = usbd_alloc_xfer(sc->sc_udev);
if (sc->sc_oxfer == NULL) {
error = ENOMEM;
goto fail_3;
}
} else {
/*
* input/output pipes and xfers already allocated
* as is the input buffer.
*/
sc->sc_ipipe = sc->sc_uhidev->sc_ipipe;
sc->sc_ixfer = sc->sc_uhidev->sc_ixfer;
sc->sc_opipe = sc->sc_uhidev->sc_opipe;
sc->sc_oxfer = sc->sc_uhidev->sc_oxfer;
}
sc->sc_obuf = usbd_alloc_buffer(sc->sc_oxfer,
sc->sc_obufsize + sc->sc_opkthdrlen);
if (sc->sc_obuf == NULL) {
error = ENOMEM;
goto fail_4;
}
if (sc->sc_methods->ucom_open != NULL) {
error = sc->sc_methods->ucom_open(sc->sc_parent,
sc->sc_portno);
if (error) {
ucom_cleanup(sc);
splx(s);
ucom_unlock(sc);
return (error);
}
}
ucom_status_change(sc);
ucomstartread(sc);
splx(s);
}
ucom_unlock(sc);
s = spltty();
tp = sc->sc_tty;
splx(s);
DPRINTF(("ucomopen: unit=%d, tp=%p\n", unit, tp));
tp->t_dev = dev;
if (!ISSET(tp->t_state, TS_ISOPEN)) {
SET(tp->t_state, TS_WOPEN);
ttychars(tp);
/*
* Initialize the termios status to the defaults. Add in the
* sticky bits from TIOCSFLAGS.
*/
t.c_ispeed = 0;
t.c_ospeed = TTYDEF_SPEED;
t.c_cflag = TTYDEF_CFLAG;
if (ISSET(sc->sc_swflags, TIOCFLAG_CLOCAL))
SET(t.c_cflag, CLOCAL);
if (ISSET(sc->sc_swflags, TIOCFLAG_CRTSCTS))
SET(t.c_cflag, CRTSCTS);
if (ISSET(sc->sc_swflags, TIOCFLAG_MDMBUF))
SET(t.c_cflag, MDMBUF);
/* Make sure ucomparam() will do something. */
tp->t_ospeed = 0;
(void) ucomparam(tp, &t);
tp->t_iflag = TTYDEF_IFLAG;
tp->t_oflag = TTYDEF_OFLAG;
tp->t_lflag = TTYDEF_LFLAG;
s = spltty();
ttsetwater(tp);
/*
* Turn on DTR. We must always do this, even if carrier is not
* present, because otherwise we'd have to use TIOCSDTR
* immediately after setting CLOCAL, which applications do not
* expect. We always assert DTR while the device is open
* unless explicitly requested to deassert it.
*/
ucom_dtr(sc, 1);
/* XXX CLR(sc->sc_rx_flags, RX_ANY_BLOCK);*/
ucom_hwiflow(sc);
if (ISSET(sc->sc_swflags, TIOCFLAG_SOFTCAR) || UCOMCUA(dev) ||
ISSET(sc->sc_msr, UMSR_DCD) || ISSET(tp->t_cflag, MDMBUF))
SET(tp->t_state, TS_CARR_ON);
else
CLR(tp->t_state, TS_CARR_ON);
} else if (ISSET(tp->t_state, TS_XCLUDE) && p->p_ucred->cr_uid != 0) {
error = EBUSY;
goto bad;
} else
s = spltty();
if (UCOMCUA(dev)) {
if (ISSET(tp->t_state, TS_ISOPEN)) {
/* Someone is already dialed in */
error = EBUSY;
goto bad1;
}
sc->sc_cua = 1;
} else {
/* tty (not cua) device, wait for carrier */
if (ISSET(flag, O_NONBLOCK)) {
if (sc->sc_cua) {
error = EBUSY;
goto bad1;
}
} else {
while (sc->sc_cua || (!ISSET(tp->t_cflag, CLOCAL) &&
!ISSET(tp->t_state, TS_CARR_ON))) {
SET(tp->t_state, TS_WOPEN);
error = ttysleep(tp, &tp->t_rawq,
TTIPRI | PCATCH, ttopen, 0);
/*
* If TS_WOPEN has been reset, that means the
* cua device has been closed. We don't want
* to fail in that case, so just go around
* again.
*/
if (error && ISSET(tp->t_state, TS_WOPEN)) {
CLR(tp->t_state, TS_WOPEN);
goto bad1;
}
}
}
}
splx(s);
error = ttyopen(UCOMUNIT(dev), tp);
if (error)
goto bad;
error = (*LINESW(tp, l_open))(dev, tp);
if (error)
goto bad;
return (0);
fail_4:
if (sc->sc_uhidev == NULL)
usbd_free_xfer(sc->sc_oxfer);
sc->sc_oxfer = NULL;
fail_3:
usbd_free_xfer(sc->sc_ixfer);
sc->sc_ixfer = NULL;
fail_2:
usbd_close_pipe(sc->sc_bulkout_pipe);
sc->sc_bulkout_pipe = NULL;
fail_1:
usbd_close_pipe(sc->sc_bulkin_pipe);
sc->sc_bulkin_pipe = NULL;
fail_0:
splx(s);
ucom_unlock(sc);
return (error);
bad1:
splx(s);
bad:
ucom_lock(sc);
ucom_cleanup(sc);
ucom_unlock(sc);
return (error);
}
Static int
ucomopen(dev_t dev, int flag, int mode, usb_proc_ptr p)
{
int unit = UCOMUNIT(dev);
struct ucom_softc *sc;
usbd_status err;
struct tty *tp;
int s;
int error;
USB_GET_SC_OPEN(ucom, unit, sc);
if (sc->sc_dying)
return (ENXIO);
tp = sc->sc_tty;
DPRINTF(("%s: ucomopen: tp = %p\n", USBDEVNAME(sc->sc_dev), tp));
if (ISSET(tp->t_state, TS_ISOPEN) &&
ISSET(tp->t_state, TS_XCLUDE) &&
suser(p))
return (EBUSY);
/*
* Do the following iff this is a first open.
*/
s = spltty();
while (sc->sc_opening)
tsleep(&sc->sc_opening, PRIBIO, "ucomop", 0);
sc->sc_opening = 1;
if (!ISSET(tp->t_state, TS_ISOPEN)) {
struct termios t;
sc->sc_poll = 0;
sc->sc_lsr = sc->sc_msr = sc->sc_mcr = 0;
tp->t_dev = dev;
/*
* Initialize the termios status to the defaults. Add in the
* sticky bits from TIOCSFLAGS.
*/
t.c_ispeed = 0;
t.c_ospeed = TTYDEF_SPEED;
t.c_cflag = TTYDEF_CFLAG;
/* Make sure ucomparam() will do something. */
tp->t_ospeed = 0;
(void)ucomparam(tp, &t);
tp->t_iflag = TTYDEF_IFLAG;
tp->t_oflag = TTYDEF_OFLAG;
tp->t_lflag = TTYDEF_LFLAG;
ttychars(tp);
ttsetwater(tp);
/*
* Turn on DTR. We must always do this, even if carrier is not
* present, because otherwise we'd have to use TIOCSDTR
* immediately after setting CLOCAL, which applications do not
* expect. We always assert DTR while the device is open
* unless explicitly requested to deassert it.
*/
(void)ucomctl(sc, TIOCM_DTR | TIOCM_RTS, DMBIS);
/* Device specific open */
if (sc->sc_callback->ucom_open != NULL) {
error = sc->sc_callback->ucom_open(sc->sc_parent,
sc->sc_portno);
if (error) {
ucom_cleanup(sc);
sc->sc_opening = 0;
wakeup(&sc->sc_opening);
splx(s);
return (error);
}
}
DPRINTF(("ucomopen: open pipes in = %d out = %d\n",
sc->sc_bulkin_no, sc->sc_bulkout_no));
/* Open the bulk pipes */
/* Bulk-in pipe */
err = usbd_open_pipe(sc->sc_iface, sc->sc_bulkin_no, 0,
&sc->sc_bulkin_pipe);
if (err) {
printf("%s: open bulk in error (addr %d): %s\n",
USBDEVNAME(sc->sc_dev), sc->sc_bulkin_no,
usbd_errstr(err));
error = EIO;
goto fail_0;
}
/* Bulk-out pipe */
err = usbd_open_pipe(sc->sc_iface, sc->sc_bulkout_no,
USBD_EXCLUSIVE_USE, &sc->sc_bulkout_pipe);
if (err) {
printf("%s: open bulk out error (addr %d): %s\n",
USBDEVNAME(sc->sc_dev), sc->sc_bulkout_no,
usbd_errstr(err));
error = EIO;
goto fail_1;
}
/* Allocate a request and an input buffer and start reading. */
sc->sc_ixfer = usbd_alloc_xfer(sc->sc_udev);
if (sc->sc_ixfer == NULL) {
error = ENOMEM;
goto fail_2;
}
sc->sc_ibuf = usbd_alloc_buffer(sc->sc_ixfer,
sc->sc_ibufsizepad);
if (sc->sc_ibuf == NULL) {
error = ENOMEM;
goto fail_3;
}
sc->sc_oxfer = usbd_alloc_xfer(sc->sc_udev);
if (sc->sc_oxfer == NULL) {
error = ENOMEM;
goto fail_3;
}
sc->sc_obuf = usbd_alloc_buffer(sc->sc_oxfer,
sc->sc_obufsize +
sc->sc_opkthdrlen);
if (sc->sc_obuf == NULL) {
error = ENOMEM;
goto fail_4;
}
/*
* Handle initial DCD.
*/
if (ISSET(sc->sc_msr, UMSR_DCD) ||
(minor(dev) & UCOM_CALLOUT_MASK))
(*linesw[tp->t_line].l_modem)(tp, 1);
ucomstartread(sc);
}
sc->sc_opening = 0;
wakeup(&sc->sc_opening);
splx(s);
error = ttyopen(dev, tp);
if (error)
goto bad;
error = (*linesw[tp->t_line].l_open)(dev, tp);
if (error)
goto bad;
disc_optim(tp, &tp->t_termios, sc);
DPRINTF(("%s: ucomopen: success\n", USBDEVNAME(sc->sc_dev)));
sc->sc_poll = 1;
sc->sc_refcnt++;
return (0);
fail_4:
usbd_free_xfer(sc->sc_oxfer);
sc->sc_oxfer = NULL;
fail_3:
usbd_free_xfer(sc->sc_ixfer);
sc->sc_ixfer = NULL;
fail_2:
usbd_close_pipe(sc->sc_bulkout_pipe);
sc->sc_bulkout_pipe = NULL;
fail_1:
usbd_close_pipe(sc->sc_bulkin_pipe);
sc->sc_bulkin_pipe = NULL;
fail_0:
sc->sc_opening = 0;
wakeup(&sc->sc_opening);
splx(s);
return (error);
bad:
if (!ISSET(tp->t_state, TS_ISOPEN)) {
/*
* We failed to open the device, and nobody else had it opened.
* Clean up the state as appropriate.
*/
ucom_cleanup(sc);
}
DPRINTF(("%s: ucomopen: failed\n", USBDEVNAME(sc->sc_dev)));
return (error);
}
