void usb_core_exit(void)
{
int i;
for(i = 0; i < USB_NUM_DRIVERS; i++)
if(drivers[i].enabled && drivers[i].disconnect != NULL)
{
drivers[i].disconnect();
drivers[i].enabled = false;
}
if(initialized) {
usb_drv_exit();
initialized = false;
}
usb_state = DEFAULT;
#ifdef HAVE_USB_CHARGING_ENABLE
usb_no_host = false;
usb_charging_maxcurrent_change(usb_charging_maxcurrent());
#endif
logf("usb_core_exit() finished");
}
static void usb_thread(void)
{
int num_acks_to_expect = 0;
struct queue_event ev;
while(1)
{
queue_wait(&usb_queue, &ev);
switch(ev.id)
{
#ifdef USB_DRIVER_CLOSE
case USB_QUIT:
return;
#endif
#ifdef HAVE_USBSTACK
case USB_TRANSFER_COMPLETION:
usb_core_handle_transfer_completion(
(struct usb_transfer_completion_event_data*)ev.data);
break;
#endif
#ifdef USB_DETECT_BY_DRV
/* In this case, these events the handle cable insertion USB
* driver determines INSERTED/EXTRACTED state. */
case USB_POWERED:
/* Set the state to USB_POWERED for now and enable the driver
* to detect a bus reset only. If a bus reset is detected,
* USB_INSERTED will be received. */
usb_state = USB_POWERED;
usb_enable(true);
break;
case USB_UNPOWERED:
usb_enable(false);
/* This part shouldn't be obligatory for anything that can
* reliably detect removal of the data lines. USB_EXTRACTED
* could be posted on that event while bus power remains
* available. */
queue_post(&usb_queue, USB_EXTRACTED, 0);
break;
#endif /* USB_DETECT_BY_DRV */
case USB_INSERTED:
#ifdef HAVE_LCD_BITMAP
if(do_screendump_instead_of_usb)
{
usb_state = USB_SCREENDUMP;
screen_dump();
#ifdef HAVE_REMOTE_LCD
remote_screen_dump();
#endif
break;
}
#endif
#ifdef HAVE_USB_POWER
if(usb_power_button())
{
/* Only charging is desired */
usb_state = USB_POWERED;
#ifdef HAVE_USBSTACK
#ifdef USB_ENABLE_STORAGE
usb_core_enable_driver(USB_DRIVER_MASS_STORAGE, false);
#endif
#ifdef USB_ENABLE_HID
#ifdef USB_ENABLE_CHARGING_ONLY
usb_core_enable_driver(USB_DRIVER_HID, false);
#else
usb_core_enable_driver(USB_DRIVER_HID, true);
#endif /* USB_ENABLE_CHARGING_ONLY */
#endif /* USB_ENABLE_HID */
#ifdef USB_ENABLE_CHARGING_ONLY
usb_core_enable_driver(USB_DRIVER_CHARGING_ONLY, true);
#endif
usb_attach();
#endif
break;
}
#endif /* HAVE_USB_POWER */
#ifdef HAVE_USBSTACK
#ifdef HAVE_USB_POWER
/* Set the state to USB_POWERED for now. If permission to connect
* by threads and storage is granted it will be changed to
* USB_CONNECTED. */
usb_state = USB_POWERED;
#endif
#ifdef USB_ENABLE_STORAGE
usb_core_enable_driver(USB_DRIVER_MASS_STORAGE, true);
#endif
#ifdef USB_ENABLE_HID
usb_core_enable_driver(USB_DRIVER_HID, usb_hid);
#endif
#ifdef USB_ENABLE_CHARGING_ONLY
usb_core_enable_driver(USB_DRIVER_CHARGING_ONLY, false);
#endif
/* Check any drivers enabled at this point for exclusive storage
* access requirements. */
exclusive_storage_access = usb_core_any_exclusive_storage();
if(!exclusive_storage_access)
{
usb_attach();
break;
}
#endif /* HAVE_USBSTACK */
/* Tell all threads that they have to back off the storage.
We subtract one for our own thread. */
num_acks_to_expect = queue_broadcast(SYS_USB_CONNECTED, 0) - 1;
DEBUGF("USB inserted. Waiting for ack from %d threads...\n",
num_acks_to_expect);
break;
case SYS_USB_CONNECTED_ACK:
if(num_acks_to_expect > 0 && --num_acks_to_expect == 0)
{
DEBUGF("All threads have acknowledged the connect.\n");
usb_slave_mode(true);
usb_state = USB_INSERTED;
}
else
{
DEBUGF("usb: got ack, %d to go...\n",
num_acks_to_expect);
}
break;
case USB_EXTRACTED:
#ifdef HAVE_LCD_BITMAP
if(usb_state == USB_SCREENDUMP)
{
usb_state = USB_EXTRACTED;
break; /* Connected for screendump only */
}
#endif
#ifndef HAVE_USBSTACK /* Stack must undo this if POWERED state was transitional */
#ifdef HAVE_USB_POWER
if(usb_state == USB_POWERED)
{
usb_state = USB_EXTRACTED;
break;
}
#endif
#endif /* HAVE_USBSTACK */
if(usb_state == USB_INSERTED)
{
/* Only disable the USB mode if we really have enabled it
some threads might not have acknowledged the
insertion */
usb_slave_mode(false);
}
usb_state = USB_EXTRACTED;
#ifdef HAVE_USBSTACK
if(!exclusive_storage_access)
{
#ifndef USB_DETECT_BY_DRV /* Disabled handling USB_UNPOWERED */
usb_enable(false);
#endif
break;
}
#endif /* HAVE_USBSTACK */
num_acks_to_expect = usb_release_exclusive_storage();
break;
case SYS_USB_DISCONNECTED_ACK:
if(num_acks_to_expect > 0 && --num_acks_to_expect == 0)
{
DEBUGF("All threads have acknowledged. "
"We're in business.\n");
}
else
{
DEBUGF("usb: got ack, %d to go...\n",
num_acks_to_expect);
}
break;
#ifdef HAVE_HOTSWAP
case SYS_HOTSWAP_INSERTED:
case SYS_HOTSWAP_EXTRACTED:
#ifdef HAVE_USBSTACK
usb_core_hotswap_event(1,ev.id == SYS_HOTSWAP_INSERTED);
#else /* !HAVE_USBSTACK */
if(usb_state == USB_INSERTED)
{
#if (CONFIG_STORAGE & STORAGE_MMC)
usb_enable(false);
usb_mmc_countdown = HZ/2; /* re-enable after 0.5 sec */
#endif /* STORAGE_MMC */
}
#endif /* HAVE_USBSTACK */
break;
#if (CONFIG_STORAGE & STORAGE_MMC)
case USB_REENABLE:
if(usb_state == USB_INSERTED)
usb_enable(true); /* reenable only if still inserted */
break;
#endif /* STORAGE_MMC */
#endif /* HAVE_HOTSWAP */
#ifdef USB_FIREWIRE_HANDLING
case USB_REQUEST_REBOOT:
#ifdef HAVE_USB_POWER
if (usb_reboot_button())
#endif
try_reboot();
break;
#endif /* USB_FIREWIRE_HANDLING */
#if defined(HAVE_USB_CHARGING_ENABLE) && defined(HAVE_USBSTACK)
case USB_CHARGER_UPDATE:
usb_charging_maxcurrent_change(usb_charging_maxcurrent());
break;
#endif
}
}
}
