Exemple #1
0
/*FUNCTION*----------------------------------------------------------------
* 
* Function Name  : _usb_host_ch9_get_configuration
* Returned Value : USB_OK, or error status
* Comments       :
*     Function to process standard device request in Chapter 9.
*     See Table 9-3 p. 250 of USB 2.0 specification.
* 
*END*--------------------------------------------------------------------*/
USB_STATUS  _usb_host_ch9_get_configuration
   (
      /* [IN] usb device */
      _usb_device_instance_handle   dev_handle,

      /* [OUT] configuration value */
      uchar_ptr                     buffer
   )
{ /* Body */

   USB_SETUP  request = req_prototype;
   USB_STATUS error = USB_OK;

   #ifdef _HOST_DEBUG_
         DEBUG_LOG_TRACE("_usb_host_ch9_get_configuration");
   #endif
   
   USB_lock();

   request.BMREQUESTTYPE = REQ_TYPE_DEVICE | REQ_TYPE_IN;
   request.BREQUEST = REQ_GET_CONFIGURATION;
   *(uint_16*)request.WLENGTH = HOST_TO_LE_SHORT_CONST(1);

   error = usb_host_ch9_dev_req(dev_handle, &request, buffer);

   USB_unlock();

   #ifdef _HOST_DEBUG_
         DEBUG_LOG_TRACE("_usb_host_ch9_get_configuration, SUCCESSFUL");
   #endif
   return USB_log_error(__FILE__,__LINE__,error);

} /* EndBody */
/*FUNCTION*----------------------------------------------------------------
* 
* Function Name  : _usb_host_ch9_get_descriptor
* Returned Value : USB_OK, or error status
* Comments       :
*     Function to process standard device request in Chapter 9.
*     See Table 9-3 p. 250 of USB 2.0 specification.
* 
*END*--------------------------------------------------------------------*/
USB_STATUS  _usb_host_ch9_get_descriptor
   (
      /* usb device */
      _usb_device_instance_handle   dev_handle,
      /* descriptor type & index */
      uint_16                       type_index,
      /* Language ID or 0 */
      uint_16                       lang_id,
      /* buffer length */
      uint_16                       buflen,         
      /* descriptor buffer */
      uchar_ptr                     buffer
   )
{ /* Body */

   USB_SETUP  request;
   USB_STATUS error = USB_OK;

   USB_lock();

   request.BMREQUESTTYPE = REQ_TYPE_DEVICE | REQ_TYPE_IN;
   request.BREQUEST = REQ_GET_DESCRIPTOR;
   htou16(request.WVALUE, type_index);
   htou16(request.WINDEX, lang_id);
   htou16(request.WLENGTH, buflen);

   error = usb_host_ch9_dev_req(dev_handle, &request, buffer);

   USB_unlock();

   return error;

} /* EndBody */
Exemple #3
0
/*FUNCTION*----------------------------------------------------------------
* 
* Function Name  : _usb_host_ch9_set_address
* Returned Value : USB_OK, or error status
* Comments       :
*     Function to process standard device request in Chapter 9.
*     See Table 9-3 p. 250 of USB 2.0 specification.
* 
*END*--------------------------------------------------------------------*/
USB_STATUS  _usb_host_ch9_set_address
   (
      /* usb device */
      _usb_device_instance_handle   dev_handle
   )
{ /* Body */

   DEV_INSTANCE_PTR  dev_ptr = (DEV_INSTANCE_PTR)dev_handle;
   USB_SETUP  request = req_prototype;
   USB_STATUS error = USB_OK;

   #ifdef _HOST_DEBUG_
         DEBUG_LOG_TRACE("_usb_host_ch9_set_address");
   #endif

   USB_lock();

   request.BMREQUESTTYPE = REQ_TYPE_DEVICE | REQ_TYPE_OUT;
   request.BREQUEST = REQ_SET_ADDRESS;
   *(uint_16*)request.WVALUE = HOST_TO_LE_SHORT(dev_ptr->address);

   error = usb_host_ch9_dev_req(dev_handle, &request, NULL);

   USB_unlock();

   #ifdef _HOST_DEBUG_
         DEBUG_LOG_TRACE("_usb_host_ch9_set_address,SUCCESSFUL");
   #endif
   return USB_log_error(__FILE__,__LINE__,error);

} /* EndBody */
/*FUNCTION*----------------------------------------------------------------
* 
* Function Name  : _usb_host_ch9_synch_frame
* Returned Value : USB_OK, or error status
* Comments       :
*     Function to process standard device request in Chapter 9.
*     See Table 9-3 p. 250 of USB 2.0 specification.
* 
*END*--------------------------------------------------------------------*/
USB_STATUS  _usb_host_ch9_synch_frame
   (
      /* usb device */
      _usb_device_instance_handle   dev_handle,

      /* interface index */
      uint_8            interface,

      /* configuration buffer */
      uchar_ptr         buffer
   )
{ /* Body */

   USB_SETUP  request = req_prototype;
   USB_STATUS error = USB_OK;

   USB_lock();

   request.BMREQUESTTYPE = REQ_TYPE_ENDPOINT | REQ_TYPE_IN;
   request.BREQUEST = REQ_SYNCH_FRAME;
   htou16(request.WINDEX, interface);
   htou16(request.WLENGTH, 2);

   error = usb_host_ch9_dev_req(dev_handle, &request, buffer);

   USB_unlock();

   return error;

} /* EndBody */
Exemple #5
0
/*FUNCTION*----------------------------------------------------------------
* 
* Function Name  : _usb_host_ch9_set_configuration
* Returned Value : USB_OK, or error status
* Comments       :
*     Function to process standard device request in Chapter 9.
*     See Table 9-3 p. 250 of USB 2.0 specification.
* 
*END*--------------------------------------------------------------------*/
USB_STATUS  _usb_host_ch9_set_configuration
   (
      /* usb device */
      _usb_device_instance_handle   dev_handle,

      /* configuration value */
      uint_16                       config
   )
{ /* Body */

   USB_SETUP  request = req_prototype;
   USB_STATUS error = USB_OK;

   #ifdef _HOST_DEBUG_
      DEBUG_LOG_TRACE("_usb_host_ch9_set_configuration");
   #endif

   USB_lock();

   request.BMREQUESTTYPE = REQ_TYPE_DEVICE | REQ_TYPE_OUT;
   request.BREQUEST = REQ_SET_CONFIGURATION;
   *(uint_16*)request.WVALUE = HOST_TO_LE_SHORT(config);

   error = usb_host_ch9_dev_req(dev_handle, &request, NULL);

   USB_unlock();
   
   #ifdef _HOST_DEBUG_
      DEBUG_LOG_TRACE("_usb_host_ch9_set_configuration SUCCESSFUL");
   #endif
   return USB_log_error(__FILE__,__LINE__,error);

} /* EndBody */
/*FUNCTION*----------------------------------------------------------------
* 
* Function Name  : _usb_host_ch9_set_interface
* Returned Value : USB_OK, or error status
* Comments       :
*     Function to process standard device request in Chapter 9.
*     See Table 9-3 p. 250 of USB 2.0 specification.
* 
*END*--------------------------------------------------------------------*/
USB_STATUS  _usb_host_ch9_set_interface
   (
      /* usb device */
      _usb_device_instance_handle   dev_handle,

      /* alternate setting */
      uint_8            alternate,

      /* interface */
      uint_8            intf
   )
{ /* Body */

   USB_SETUP  request = req_prototype;
   USB_STATUS error = USB_OK;

   USB_lock();   

   request.BMREQUESTTYPE = REQ_TYPE_INTERFACE | REQ_TYPE_OUT;
   request.BREQUEST = REQ_SET_INTERFACE;
   htou16(request.WVALUE, alternate);
   htou16(request.WINDEX, intf);

   error = usb_host_ch9_dev_req(dev_handle, &request, NULL);

   USB_unlock();
   
   return error;

} /* EndBody */
/*FUNCTION*----------------------------------------------------------------
* 
* Function Name  : _usb_host_ch9_set_configuration
* Returned Value : USB_OK, or error status
* Comments       :
*     Function to process standard device request in Chapter 9.
*     See Table 9-3 p. 250 of USB 2.0 specification.
* 
*END*--------------------------------------------------------------------*/
USB_STATUS  _usb_host_ch9_set_configuration
   (
      /* usb device */
      _usb_device_instance_handle   dev_handle,

      /* configuration value */
      uint_16                       config
   )
{ /* Body */

   USB_SETUP  request = req_prototype;
   USB_STATUS error = USB_OK;

   USB_lock();

   request.BMREQUESTTYPE = REQ_TYPE_DEVICE | REQ_TYPE_OUT;
   request.BREQUEST = REQ_SET_CONFIGURATION;
   htou16(request.WVALUE, config);

   error = usb_host_ch9_dev_req(dev_handle, &request, NULL);

   USB_unlock();
   
   return error;

} /* EndBody */
/*FUNCTION*----------------------------------------------------------------
* 
* Function Name  : _usb_host_ch9_get_interface
* Returned Value : USB_OK, or error status
* Comments       :
*     Function to process standard device request in Chapter 9.
*     See Table 9-3 p. 250 of USB 2.0 specification.
* 
*END*--------------------------------------------------------------------*/
USB_STATUS  _usb_host_ch9_get_interface
   (
      /* usb device */
      _usb_device_instance_handle   dev_handle,

      /* interface index */
      uint_8            interface,

      /* alternate setting buffer */
      uchar_ptr         buffer
   )
{ /* Body */

   USB_SETUP  request = req_prototype;
   USB_STATUS error = USB_OK;

   USB_lock();

   request.BMREQUESTTYPE = REQ_TYPE_INTERFACE | REQ_TYPE_IN;
   request.BREQUEST = REQ_GET_INTERFACE;
   htou16(request.WINDEX, interface);
   htou16(request.WLENGTH, 1);

   error = usb_host_ch9_dev_req(dev_handle, &request, buffer);

   USB_unlock();

   return error;

} /* EndBody */
/*FUNCTION*----------------------------------------------------------------
* 
* Function Name  : _usb_host_ch9_get_configuration
* Returned Value : USB_OK, or error status
* Comments       :
*     Function to process standard device request in Chapter 9.
*     See Table 9-3 p. 250 of USB 2.0 specification.
* 
*END*--------------------------------------------------------------------*/
USB_STATUS  _usb_host_ch9_get_configuration
   (
      /* [IN] usb device */
      _usb_device_instance_handle   dev_handle,

      /* [OUT] configuration value */
      uchar_ptr                     buffer
   )
{ /* Body */

   USB_SETUP  request = req_prototype;
   USB_STATUS error = USB_OK;

   USB_lock();

   request.BMREQUESTTYPE = REQ_TYPE_DEVICE | REQ_TYPE_IN;
   request.BREQUEST = REQ_GET_CONFIGURATION;
   htou16(request.WLENGTH, 1);

   error = usb_host_ch9_dev_req(dev_handle, &request, buffer);

   USB_unlock();

   return error;

} /* EndBody */
Exemple #10
0
/*FUNCTION*----------------------------------------------------------------
* 
* Function Name  : _usb_host_ch9_clear_feature
* Returned Value : USB_OK, or error status
* Comments       :
*     Function to process standard device request in Chapter 9.
*     See Table 9-3 p. 250 of USB 2.0 specification.
* 
*END*--------------------------------------------------------------------*/
USB_STATUS  _usb_host_ch9_clear_feature
   (
      /* usb device */
      _usb_device_instance_handle   dev_handle,

      /* request type device/interface/endpoint */
      uint_8                        req_type,

      /* device = 0, or interface/endpoint */
      uint_8                        intf_endpt,

      /* feature selection */
      uint_16                       feature
   )
{ /* Body */

   USB_SETUP  request = req_prototype;
   USB_STATUS error = USB_OK;

   #ifdef _HOST_DEBUG_
         DEBUG_LOG_TRACE("_usb_host_ch9_clear_feature");
   #endif

   USB_lock();
   
   switch (req_type) {
      case REQ_TYPE_DEVICE:
         break;
      case REQ_TYPE_INTERFACE:
      case REQ_TYPE_ENDPOINT:
         *(uint_16*)request.WINDEX = HOST_TO_LE_SHORT(intf_endpt);
         break;
      default:
         USB_unlock();
         #ifdef _HOST_DEBUG_
               DEBUG_LOG_TRACE("_usb_host_ch9_clear_feature, invalid request");
         #endif
         return USB_log_error(__FILE__,__LINE__,USBERR_INVALID_BMREQ_TYPE);
   } /* EndSwitch */

   request.BMREQUESTTYPE = (uchar)(req_type | REQ_TYPE_OUT);
   request.BREQUEST = REQ_CLEAR_FEATURE;
   *(uint_16*)request.WVALUE = HOST_TO_LE_SHORT(feature);

   error = usb_host_ch9_dev_req(dev_handle, &request, NULL);

   USB_unlock();

   #ifdef _HOST_DEBUG_
         DEBUG_LOG_TRACE("_usb_host_ch9_clear_feature, SUCCESSFUL");
   #endif
   return USB_log_error(__FILE__,__LINE__,error);

} /* EndBody */
Exemple #11
0
/*FUNCTION*----------------------------------------------------------------
* 
* Function Name  : _usb_host_ch9_get_status
* Returned Value : USB_OK, or error status
* Comments       :
*     Function to process standard device request in Chapter 9.
*     See Table 9-3 p. 250 of USB 2.0 specification.
* 
*END*--------------------------------------------------------------------*/
USB_STATUS  _usb_host_ch9_get_status
   (
      /* usb device */
      _usb_device_instance_handle   dev_handle,

      /* request type device/interface/endpoint */
      uint_8            req_type,

      /* device = 0, or interface/endpoint */
      uint_8            intf_endpt,

      /* returned status */
      uchar_ptr         buffer
   )
{ /* Body */

   USB_SETUP  request = req_prototype;
   USB_STATUS error = USB_OK;

   #ifdef _HOST_DEBUG_
         DEBUG_LOG_TRACE("_usb_host_ch9_get_status");
   #endif

   USB_lock();

   switch (req_type) {
      case REQ_TYPE_DEVICE:
      case REQ_TYPE_INTERFACE:
      case REQ_TYPE_ENDPOINT:
         break;
      default:
         USB_unlock();
         #ifdef _HOST_DEBUG_
               DEBUG_LOG_TRACE("_usb_host_ch9_get_status, invalid parameter");
         #endif
         return USB_log_error(__FILE__,__LINE__,USBERR_INVALID_BMREQ_TYPE);
   } /* EndSwitch */

   request.BMREQUESTTYPE = (uchar)(req_type | REQ_TYPE_IN);
   request.BREQUEST = REQ_GET_STATUS;
   *(uint_16*)request.WINDEX = HOST_TO_LE_SHORT(intf_endpt);
   *(uint_16*)request.WLENGTH = HOST_TO_LE_SHORT_CONST(2);

   error = usb_host_ch9_dev_req(dev_handle, &request, buffer);
   USB_unlock();

   #ifdef _HOST_DEBUG_
         DEBUG_LOG_TRACE("_usb_host_ch9_get_status, SUCCESSFUL");
   #endif
   return USB_log_error(__FILE__,__LINE__,error);

} /* EndBody */
Exemple #12
0
/*FUNCTION*----------------------------------------------------------------
* 
* Function Name  : _usb_host_ch9_set_feature
* Returned Value : USB_OK, or error status
* Comments       :
*     Function to process standard device request in Chapter 9.
*     See Table 9-3 p. 250 of USB 2.0 specification.
* 
*END*--------------------------------------------------------------------*/
usb_status  _usb_host_ch9_set_feature
(
    /* usb device */
    usb_device_instance_handle   dev_handle,
    /* request type device/interface/endpoint */
    uint8_t            req_type,
    /* device = 0, or interface/endpoint */
    uint8_t            intf_endpt,
    /* feature selection */
    uint16_t           feature
)
{ /* Body */
    usb_setup_t  request = req_prototype;
    usb_status error = USB_OK;

    #ifdef _HOST_DEBUG_
        DEBUG_LOG_TRACE("_usb_host_ch9_set_feature");
    #endif

    switch (req_type) {
        case REQ_TYPE_DEVICE:
            break;
        case REQ_TYPE_INTERFACE:
        case REQ_TYPE_ENDPOINT:
            *(uint16_t*)request.windex = USB_HOST_TO_LE_SHORT(intf_endpt);
            break;
        default:
            OS_Unlock();
            #ifdef _HOST_DEBUG_
                DEBUG_LOG_TRACE("_usb_host_ch9_set_feature, invalid param");
            #endif
            return USB_log_error(__FILE__,__LINE__,USBERR_INVALID_BMREQ_TYPE);
    } /* EndSwitch */

    request.bmrequesttype = (uint8_t)(req_type | REQ_TYPE_OUT);
    request.brequest = REQ_SET_FEATURE;
    *(uint16_t*)request.wvalue = USB_HOST_TO_LE_SHORT(feature);

    error = usb_host_ch9_dev_req(dev_handle, &request, NULL);

    #ifdef _HOST_DEBUG_
        DEBUG_LOG_TRACE("_usb_host_ch9_set_feature, SUCCESSFUL");
    #endif
    return USB_log_error(__FILE__,__LINE__,error);
} /* EndBody */
Exemple #13
0
/*FUNCTION*----------------------------------------------------------------
* 
* Function Name  : _usb_host_ch9_clear_feature
* Returned Value : USB_OK, or error status
* Comments       :
*     Function to process standard device request in Chapter 9.
*     See Table 9-3 p. 250 of USB 2.0 specification.
* 
*END*--------------------------------------------------------------------*/
USB_STATUS  _usb_host_ch9_clear_feature
   (
      /* usb device */
      _usb_device_instance_handle   dev_handle,

      /* request type device/interface/endpoint */
      uint_8                        req_type,

      /* device = 0, or interface/endpoint */
      uint_8                        intf_endpt,

      /* feature selection */
      uint_16                       feature
   )
{ /* Body */

   USB_SETUP  request = req_prototype;
   USB_STATUS error = USB_OK;

   USB_lock();
   
   switch (req_type) {
      case REQ_TYPE_DEVICE:
         break;
      case REQ_TYPE_INTERFACE:
      case REQ_TYPE_ENDPOINT:
         htou16(request.WINDEX, intf_endpt);
         break;
      default:
         USB_unlock();
         return USBERR_INVALID_BMREQ_TYPE;
   } /* EndSwitch */

   request.BMREQUESTTYPE = (uchar)(req_type | REQ_TYPE_OUT);
   request.BREQUEST = REQ_CLEAR_FEATURE;
   htou16(request.WVALUE, feature);

   error = usb_host_ch9_dev_req(dev_handle, &request, NULL);

   USB_unlock();

   return error;

} /* EndBody */
Exemple #14
0
/*FUNCTION*----------------------------------------------------------------
* 
* Function Name  : _usb_host_ch9_set_descriptor
* Returned Value : USB_OK, or error status
* Comments       :
*     Function to process standard device request in Chapter 9.
*     See Table 9-3 p. 250 of USB 2.0 specification.
* 
*END*--------------------------------------------------------------------*/
USB_STATUS  _usb_host_ch9_set_descriptor
   (
      /* usb device */
      _usb_device_instance_handle   dev_handle,

      /* descriptor type & index */
      uint_16           type_index,

      /* Language ID or 0 */
      uint_16           lang_id,

      /* buffer length */
      uint_16           buflen,         

      /* descriptor buffer */
      uchar_ptr         buffer
   )
{ /* Body */

   USB_SETUP  request;
   USB_STATUS error = USB_OK;
   #ifdef _HOST_DEBUG_
         DEBUG_LOG_TRACE("_usb_host_ch9_set_descriptor");
   #endif

   USB_lock();

   request.BMREQUESTTYPE = REQ_TYPE_DEVICE | REQ_TYPE_OUT;
   request.BREQUEST = REQ_SET_DESCRIPTOR;
   *(uint_16*)request.WVALUE = HOST_TO_LE_SHORT(type_index);
   *(uint_16*)request.WINDEX = HOST_TO_LE_SHORT(lang_id);
   *(uint_16*)request.WLENGTH = HOST_TO_LE_SHORT(buflen);

   error = usb_host_ch9_dev_req(dev_handle, &request, buffer);

   USB_unlock();

   #ifdef _HOST_DEBUG_
         DEBUG_LOG_TRACE("_usb_host_ch9_set_descriptor SUCCESSFUL");
   #endif

   return USB_log_error(__FILE__,__LINE__,error);

} /* EndBody */
Exemple #15
0
/*FUNCTION*----------------------------------------------------------------
* 
* Function Name  : _usb_host_ch9_get_status
* Returned Value : USB_OK, or error status
* Comments       :
*     Function to process standard device request in Chapter 9.
*     See Table 9-3 p. 250 of USB 2.0 specification.
* 
*END*--------------------------------------------------------------------*/
usb_status  _usb_host_ch9_get_status
(
/* usb device */
    usb_device_instance_handle  dev_handle,
    /* request type device/interface/endpoint */
    uint8_t                     req_type,
    /* device = 0, or interface/endpoint */
    uint16_t                     intf_endpt,
    /* returned status */
    uint8_t *                   buffer
)
{ /* Body */
    usb_setup_t  request = req_prototype;
    usb_status error = USB_OK;

    #ifdef _HOST_DEBUG_
        DEBUG_LOG_TRACE("_usb_host_ch9_get_status");
    #endif

    switch (req_type) 
    {
        case REQ_TYPE_DEVICE:
        case REQ_TYPE_INTERFACE:
        case REQ_TYPE_ENDPOINT:
            break;
        default:
            #ifdef _HOST_DEBUG_
            DEBUG_LOG_TRACE("_usb_host_ch9_get_status, invalid parameter");
            #endif
            return USB_log_error(__FILE__,__LINE__,USBERR_INVALID_BMREQ_TYPE);
    } /* EndSwitch */

    request.bmrequesttype = (uint8_t)(req_type | REQ_TYPE_IN);
    request.brequest = REQ_GET_STATUS;
    *(uint16_t*)request.windex = USB_HOST_TO_LE_SHORT(intf_endpt);
    *(uint16_t*)request.wlength = USB_HOST_TO_LE_SHORT_CONST(2);

    error = usb_host_ch9_dev_req(dev_handle, &request, buffer);

    #ifdef _HOST_DEBUG_
        DEBUG_LOG_TRACE("_usb_host_ch9_get_status, SUCCESSFUL");
    #endif
    return USB_log_error(__FILE__,__LINE__,error);
} /* EndBody */
Exemple #16
0
/*FUNCTION*----------------------------------------------------------------
* 
* Function Name  : _usb_host_ch9_get_status
* Returned Value : USB_OK, or error status
* Comments       :
*     Function to process standard device request in Chapter 9.
*     See Table 9-3 p. 250 of USB 2.0 specification.
* 
*END*--------------------------------------------------------------------*/
USB_STATUS  _usb_host_ch9_get_status
   (
      /* usb device */
      _usb_device_instance_handle   dev_handle,

      /* request type device/interface/endpoint */
      uint_8            req_type,

      /* device = 0, or interface/endpoint */
      uint_8            intf_endpt,

      /* returned status */
      uchar_ptr         buffer
   )
{ /* Body */

   USB_SETUP  request = req_prototype;
   USB_STATUS error = USB_OK;

   USB_lock();

   switch (req_type) {
      case REQ_TYPE_DEVICE:
      case REQ_TYPE_INTERFACE:
      case REQ_TYPE_ENDPOINT:
         break;
      default:
         USB_unlock();
         return USBERR_INVALID_BMREQ_TYPE;
   } /* EndSwitch */

   request.BMREQUESTTYPE = (uchar)(req_type | REQ_TYPE_IN);
   request.BREQUEST = REQ_GET_STATUS;
   htou16(request.WINDEX, intf_endpt);
   htou16(request.WLENGTH, 2);

   error = usb_host_ch9_dev_req(dev_handle, &request, buffer);
   USB_unlock();

   return error;

} /* EndBody */
Exemple #17
0
/*FUNCTION*----------------------------------------------------------------
* 
* Function Name  : _usb_host_ch9_set_interface
* Returned Value : USB_OK, or error status
* Comments       :
*     Function to process standard device request in Chapter 9.
*     See Table 9-3 p. 250 of USB 2.0 specification.
* 
*END*--------------------------------------------------------------------*/
USB_STATUS  _usb_host_ch9_set_interface
   (
      /* usb device */
      _usb_device_instance_handle   dev_handle,

      /* alternate setting */
      uint_8            alternate,

      /* interface */
      uint_8            intf
   )
{ /* Body */

   USB_SETUP  request = req_prototype;
   USB_STATUS error = USB_OK;

   #ifdef _HOST_DEBUG_
         DEBUG_LOG_TRACE("_usb_host_ch9_set_interface");
   #endif

   USB_lock();   

   request.BMREQUESTTYPE = REQ_TYPE_INTERFACE | REQ_TYPE_OUT;
   request.BREQUEST = REQ_SET_INTERFACE;
   *(uint_16*)request.WVALUE = HOST_TO_LE_SHORT(alternate);
   *(uint_16*)request.WINDEX = HOST_TO_LE_SHORT(intf);

   error = usb_host_ch9_dev_req(dev_handle, &request, NULL);

   USB_unlock();
   
   #ifdef _HOST_DEBUG_
         DEBUG_LOG_TRACE("_usb_host_ch9_set_interface, SUCCESSFUL");
   #endif
   
   return USB_log_error(__FILE__,__LINE__,error);

} /* EndBody */
Exemple #18
0
/*FUNCTION*----------------------------------------------------------------
* 
* Function Name  : _usb_host_ch9_get_interface
* Returned Value : USB_OK, or error status
* Comments       :
*     Function to process standard device request in Chapter 9.
*     See Table 9-3 p. 250 of USB 2.0 specification.
* 
*END*--------------------------------------------------------------------*/
USB_STATUS  _usb_host_ch9_get_interface
   (
      /* usb device */
      _usb_device_instance_handle   dev_handle,

      /* interface index */
      uint_8            interface,

      /* alternate setting buffer */
      uchar_ptr         buffer
   )
{ /* Body */

   USB_SETUP  request = req_prototype;
   USB_STATUS error = USB_OK;

   #ifdef _HOST_DEBUG_
         DEBUG_LOG_TRACE("_usb_host_ch9_get_interface");
   #endif

   USB_lock();

   request.BMREQUESTTYPE = REQ_TYPE_INTERFACE | REQ_TYPE_IN;
   request.BREQUEST = REQ_GET_INTERFACE;
   *(uint_16*)request.WINDEX = HOST_TO_LE_SHORT(interface);
   *(uint_16*)request.WLENGTH = HOST_TO_LE_SHORT_CONST(1);

   error = usb_host_ch9_dev_req(dev_handle, &request, buffer);

   USB_unlock();

   #ifdef _HOST_DEBUG_
         DEBUG_LOG_TRACE("_usb_host_ch9_get_interface, SUCCESSFUL");
   #endif
   
   return USB_log_error(__FILE__,__LINE__,error);

} /* EndBody */
Exemple #19
0
/*FUNCTION*----------------------------------------------------------------
* 
* Function Name  : _usb_host_ch9_synch_frame
* Returned Value : USB_OK, or error status
* Comments       :
*     Function to process standard device request in Chapter 9.
*     See Table 9-3 p. 250 of USB 2.0 specification.
* 
*END*--------------------------------------------------------------------*/
USB_STATUS  _usb_host_ch9_synch_frame
   (
      /* usb device */
      _usb_device_instance_handle   dev_handle,

      /* interface index */
      uint_8            interface,

      /* configuration buffer */
      uchar_ptr         buffer
   )
{ /* Body */

   USB_SETUP  request = req_prototype;
   USB_STATUS error = USB_OK;

   #ifdef _HOST_DEBUG_
         DEBUG_LOG_TRACE("_usb_host_ch9_synch_frame");
   #endif

   USB_lock();

   request.BMREQUESTTYPE = REQ_TYPE_ENDPOINT | REQ_TYPE_IN;
   request.BREQUEST = REQ_SYNCH_FRAME;
   *(uint_16*)request.WINDEX = HOST_TO_LE_SHORT(interface);
   *(uint_16*)request.WLENGTH = HOST_TO_LE_SHORT_CONST(2);

   error = usb_host_ch9_dev_req(dev_handle, &request, buffer);

   USB_unlock();

   #ifdef _HOST_DEBUG_
         DEBUG_LOG_TRACE("_usb_host_ch9_synch_frame, SUCCESSFUL");
   #endif
   
   return USB_log_error(__FILE__,__LINE__,error);

} /* EndBody */
Exemple #20
0
/*FUNCTION*----------------------------------------------------------------
* 
* Function Name  : _usb_host_ch9_set_address
* Returned Value : USB_OK, or error status
* Comments       :
*     Function to process standard device request in Chapter 9.
*     See Table 9-3 p. 250 of USB 2.0 specification.
* 
*END*--------------------------------------------------------------------*/
USB_STATUS  _usb_host_ch9_set_address
   (
      /* usb device */
      _usb_device_instance_handle   dev_handle
   )
{ /* Body */

   DEV_INSTANCE_PTR  dev_ptr = (DEV_INSTANCE_PTR)dev_handle;
   USB_SETUP  request = req_prototype;
   USB_STATUS error = USB_OK;

   USB_lock();

   request.BMREQUESTTYPE = REQ_TYPE_DEVICE | REQ_TYPE_OUT;
   request.BREQUEST = REQ_SET_ADDRESS;
   htou16(request.WVALUE, dev_ptr->address);

   error = usb_host_ch9_dev_req(dev_handle, &request, NULL);

   USB_unlock();

   return error;

} /* EndBody */