/* some members of urb must be substituted before. */
int usbip_recv_iso(struct usbip_device *ud, struct urb *urb)
{
	void *buff;
	struct usbip_iso_packet_descriptor *iso;
	int np = urb->number_of_packets;
	int size = np * sizeof(*iso);
	int i;
	int ret;
	int total_length = 0;

	if (!usb_pipeisoc(urb->pipe))
		return 0;

	/* my Bluetooth dongle gets ISO URBs which are np = 0 */
	if (np == 0)
		return 0;

	buff = kzalloc(size, GFP_KERNEL);
	if (!buff)
		return -ENOMEM;

	ret = usbip_recv(ud->tcp_socket, buff, size);
	if (ret != size) {
		dev_err(&urb->dev->dev, "recv iso_frame_descriptor, %d\n",
			ret);
		kfree(buff);

		if (ud->side == USBIP_STUB)
			usbip_event_add(ud, SDEV_EVENT_ERROR_TCP);
		else
			usbip_event_add(ud, VDEV_EVENT_ERROR_TCP);

		return -EPIPE;
	}

	iso = (struct usbip_iso_packet_descriptor *) buff;
	for (i = 0; i < np; i++) {
		usbip_iso_packet_correct_endian(&iso[i], 0);
		usbip_pack_iso(&iso[i], &urb->iso_frame_desc[i], 0);
		total_length += urb->iso_frame_desc[i].actual_length;
	}

	kfree(buff);

	if (total_length != urb->actual_length) {
		dev_err(&urb->dev->dev,
			"total length of iso packets %d not equal to actual "
			"length of buffer %d\n",
			total_length, urb->actual_length);

		if (ud->side == USBIP_STUB)
			usbip_event_add(ud, SDEV_EVENT_ERROR_TCP);
		else
			usbip_event_add(ud, VDEV_EVENT_ERROR_TCP);

		return -EPIPE;
	}

	return ret;
}
/*
 * This functions restores the padding which was removed for optimizing
 * the bandwidth during transfer over tcp/ip
 *
 * buffer and iso packets need to be stored and be in propeper endian in urb
 * before calling this function
 */
void usbip_pad_iso(struct usbip_device *ud, struct urb *urb)
{
    int np = urb->number_of_packets;
    int i;
    int actualoffset = urb->actual_length;

    if (!usb_pipeisoc(urb->pipe))
        return;

    /* if no packets or length of data is 0, then nothing to unpack */
    if (np == 0 || urb->actual_length == 0)
        return;

    /*
     * if actual_length is transfer_buffer_length then no padding is
     * present.
    */
    if (urb->actual_length == urb->transfer_buffer_length)
        return;

    /*
     * loop over all packets from last to first (to prevent overwritting
     * memory when padding) and move them into the proper place
     */
    for (i = np-1; i > 0; i--) {
        actualoffset -= urb->iso_frame_desc[i].actual_length;
        memmove(urb->transfer_buffer + urb->iso_frame_desc[i].offset,
                urb->transfer_buffer + actualoffset,
                urb->iso_frame_desc[i].actual_length);
    }
}
Exemple #3
0
static inline int checkAlreadyActive(hci_t * hci, urb_t * urb,struct hci_endpoint * ep)
{
	if (!ep->pipe_head) {ep->pipe_head = urb; return 0;}
	if (!list_empty (&(ep->urb_queue))) return 1;
	if (usb_pipeisoc (urb->pipe)) {
		if ((urb->transfer_flags & USB_ISO_ASAP)==0) return 1;
		return QueuePartner(hci,urb,ep->pipe_head);
	}
	return 1;
}
Exemple #4
0
static int usbhsh_queue_push(struct usb_hcd *hcd,
			     struct urb *urb,
			     gfp_t mem_flags)
{
	struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
	struct usbhsh_ep *uep = usbhsh_ep_to_uep(urb->ep);
	struct usbhs_pipe *pipe = usbhsh_uep_to_pipe(uep);
	struct device *dev = usbhsh_hcd_to_dev(hcd);
	struct usbhsh_request *ureq;
	void *buf;
	int len, sequence;

	if (usb_pipeisoc(urb->pipe)) {
		dev_err(dev, "pipe iso is not supported now\n");
		return -EIO;
	}

	/* this ureq will be freed on usbhsh_queue_done() */
	ureq = usbhsh_ureq_alloc(hpriv, urb, mem_flags);
	if (unlikely(!ureq)) {
		dev_err(dev, "ureq alloc fail\n");
		return -ENOMEM;
	}

	if (usb_pipein(urb->pipe))
		pipe->handler = &usbhs_fifo_dma_pop_handler;
	else
		pipe->handler = &usbhs_fifo_dma_push_handler;

	buf = (void *)(urb->transfer_buffer + urb->actual_length);
	len = urb->transfer_buffer_length - urb->actual_length;

	sequence = usb_gettoggle(urb->dev,
				 usb_pipeendpoint(urb->pipe),
				 usb_pipeout(urb->pipe));

	dev_dbg(dev, "%s\n", __func__);
	usbhs_pkt_push(pipe, &ureq->pkt, usbhsh_queue_done,
		       buf, len, (urb->transfer_flags & URB_ZERO_PACKET),
		       sequence);

	usbhs_pkt_start(pipe);

	return 0;
}
Exemple #5
0
static inline int hcs_urb_queue (hci_t * hci, struct urb * urb)
{
	int i;
	
	if (usb_pipeisoc (urb->pipe)) {
		for (i = 0; i < urb->number_of_packets; i++) {
  			urb->iso_frame_desc[i].actual_length = 0;
  			urb->iso_frame_desc[i].status = -EXDEV;
  		}
	}	

	urb->status = USB_ST_URB_PENDING;
	urb->actual_length = 0;
	urb->error_count = 0;

	qu_queue_urb (hci, urb);

	return 0;
}
Exemple #6
0
static int hcs_urb_queue (hci_t * hci, urb_t * urb)
{
	int i;

	if (usb_pipeisoc (urb->pipe)) {
		for (i = 0; i < urb->number_of_packets; i++) {
			urb->iso_frame_desc[i].actual_length = 0;
			urb->iso_frame_desc[i].status = -EXDEV;
		}
	}
	i = InitDmaWork(hci,urb);

	if (i==0) {
		urb->status = USB_ST_URB_PENDING;
		urb->actual_length = 0;
		qu_queue_urb (hci, urb);
	}
	return i;
}
Exemple #7
0
/* some members of urb must be substituted before. */
int usbip_recv_iso(struct usbip_device *ud, struct urb *urb)
{
	void *buff;
	struct usbip_iso_packet_descriptor *iso;
	int np = urb->number_of_packets;
	int size = np * sizeof(*iso);
	int i;
	int ret;

	if (!usb_pipeisoc(urb->pipe))
		return 0;

	buff = kzalloc(size, GFP_KERNEL);
	if (!buff)
		return -ENOMEM;

	ret = usbip_xmit(0, ud->tcp_socket, buff, size, 0);
	if (ret != size) {
		uerr("recv iso_frame_descriptor, %d\n", ret);
		kfree(buff);

		if (ud->side == USBIP_STUB)
			usbip_event_add(ud, SDEV_EVENT_ERROR_TCP);
		else
			usbip_event_add(ud, VDEV_EVENT_ERROR_TCP);

		return -EPIPE;
	}

	for (i = 0; i < np; i++) {
		iso = buff + (i * sizeof(*iso));

		usbip_iso_pakcet_correct_endian(iso, 0);
		usbip_pack_iso(iso, &urb->iso_frame_desc[i], 0);
	}


	kfree(buff);

	return ret;
}
void usbip_pad_iso(struct usbip_device *ud, struct urb *urb)
{
	int np = urb->number_of_packets;
	int i;
	int actualoffset = urb->actual_length;

	if (!usb_pipeisoc(urb->pipe))
		return;

	
	if (np == 0 || urb->actual_length == 0)
		return;

	if (urb->actual_length == urb->transfer_buffer_length)
		return;

	for (i = np-1; i > 0; i--) {
		actualoffset -= urb->iso_frame_desc[i].actual_length;
		memmove(urb->transfer_buffer + urb->iso_frame_desc[i].offset,
			urb->transfer_buffer + actualoffset,
			urb->iso_frame_desc[i].actual_length);
	}
}
Exemple #9
0
int usbip_recv_iso(struct usbip_device *ud, struct urb *urb)
{
	int ret;
	char *iso_frame_desc = (char *) &urb->iso_frame_desc[0];
	int np = urb->number_of_packets;
	int size = np * sizeof(struct usb_iso_packet_descriptor);

	if (!usb_pipeisoc(urb->pipe))
		return 0;

	ret = usbip_xmit(0, ud->tcp_socket, iso_frame_desc, size, 0);
	if (ret != size ) {
		uerr("recv iso_frame_descriptor, %d\n", ret);
		if (ud->side == USBIP_STUB) {
			usbip_event_add(ud, SDEV_EVENT_ERROR_TCP);
		} else {
			usbip_event_add(ud, VDEV_EVENT_ERROR_TCP);
		}
		return -EPIPE;
	}

	return ret;
}
Exemple #10
0
/**
 * usb_sg_init - initializes scatterlist-based bulk/interrupt I/O request
 * @io: request block being initialized.  until usb_sg_wait() returns,
 *	treat this as a pointer to an opaque block of memory,
 * @dev: the usb device that will send or receive the data
 * @pipe: endpoint "pipe" used to transfer the data
 * @period: polling rate for interrupt endpoints, in frames or
 * 	(for high speed endpoints) microframes; ignored for bulk
 * @sg: scatterlist entries
 * @nents: how many entries in the scatterlist
 * @length: how many bytes to send from the scatterlist, or zero to
 * 	send every byte identified in the list.
 * @mem_flags: SLAB_* flags affecting memory allocations in this call
 *
 * Returns zero for success, else a negative errno value.  This initializes a
 * scatter/gather request, allocating resources such as I/O mappings and urb
 * memory (except maybe memory used by USB controller drivers).
 *
 * The request must be issued using usb_sg_wait(), which waits for the I/O to
 * complete (or to be canceled) and then cleans up all resources allocated by
 * usb_sg_init().
 *
 * The request may be canceled with usb_sg_cancel(), either before or after
 * usb_sg_wait() is called.
 */
int usb_sg_init (
	struct usb_sg_request	*io,
	struct usb_device	*dev,
	unsigned		pipe, 
	unsigned		period,
	struct scatterlist	*sg,
	int			nents,
	size_t			length,
	int			mem_flags
)
{
	int			i;
	int			urb_flags;
	int			dma;

	if (!io || !dev || !sg
			|| usb_pipecontrol (pipe)
			|| usb_pipeisoc (pipe)
			|| nents <= 0)
		return -EINVAL;

	spin_lock_init (&io->lock);
	io->dev = dev;
	io->pipe = pipe;
	io->sg = sg;
	io->nents = nents;

	/* not all host controllers use DMA (like the mainstream pci ones);
	 * they can use PIO (sl811) or be software over another transport.
	 */
	dma = (dev->dev.dma_mask != 0);
	if (dma)
		io->entries = usb_buffer_map_sg (dev, pipe, sg, nents);
	else
		io->entries = nents;

	/* initialize all the urbs we'll use */
	if (io->entries <= 0)
		return io->entries;

	io->count = 0;
	io->urbs = kmalloc (io->entries * sizeof *io->urbs, mem_flags);
	if (!io->urbs)
		goto nomem;

	urb_flags = URB_ASYNC_UNLINK | URB_NO_TRANSFER_DMA_MAP
			| URB_NO_INTERRUPT;
	if (usb_pipein (pipe))
		urb_flags |= URB_SHORT_NOT_OK;

	for (i = 0; i < io->entries; i++, io->count = i) {
		unsigned		len;

		io->urbs [i] = usb_alloc_urb (0, mem_flags);
		if (!io->urbs [i]) {
			io->entries = i;
			goto nomem;
		}

		io->urbs [i]->dev = NULL;
		io->urbs [i]->pipe = pipe;
		io->urbs [i]->interval = period;
		io->urbs [i]->transfer_flags = urb_flags;

		io->urbs [i]->complete = sg_complete;
		io->urbs [i]->context = io;
		io->urbs [i]->status = -EINPROGRESS;
		io->urbs [i]->actual_length = 0;

		if (dma) {
			/* hc may use _only_ transfer_dma */
			io->urbs [i]->transfer_dma = sg_dma_address (sg + i);
			len = sg_dma_len (sg + i);
		} else {
			/* hc may use _only_ transfer_buffer */
			io->urbs [i]->transfer_buffer =
				page_address (sg [i].page) + sg [i].offset;
			len = sg [i].length;
		}

		if (length) {
			len = min_t (unsigned, len, length);
			length -= len;
			if (length == 0)
				io->entries = i + 1;
		}
		io->urbs [i]->transfer_buffer_length = len;
	}
	io->urbs [--i]->transfer_flags &= ~URB_NO_INTERRUPT;

	/* transaction state */
	io->status = 0;
	io->bytes = 0;
	init_completion (&io->complete);
	return 0;

nomem:
	sg_clean (io);
	return -ENOMEM;
}
Exemple #11
0
static int vhcd_urb_enqueue(struct usb_hcd *hcd,
                            struct usb_host_endpoint *ep,
                            struct urb *urb,
                            gfp_t mem_flags)
{
	int ret = 0;
	unsigned int transfer_flags = 0 ;

	struct usb_device * udev = urb->dev;

	/* FIXME Check for non existent device */

	if (!HC_IS_RUNNING(hcd->state)) {
		LOG("HC is not running\n");
		return -ENODEV;
	}

	/* we have to trap some control messages, i.e. USB_REQ_SET_ADDRESS... */
	/* TODO we don't have to do it here, but in the server */

	if (usb_pipedevice(urb->pipe) == 0) {
		__u8 type = usb_pipetype(urb->pipe);
		struct usb_ctrlrequest *ctrlreq = (struct usb_ctrlrequest *) urb->setup_packet;

		if (type != PIPE_CONTROL || !ctrlreq ) {
			LOG("invalid request to devnum 0\n");
			ret = -EINVAL;
			goto no_need_xmit;
		}

		switch (ctrlreq->bRequest) {

		case USB_REQ_SET_ADDRESS:
			LOG("SetAddress Request (%d) to port %d\n",
			          ctrlreq->wValue, urb->dev->portnum);

			spin_lock (&urb->lock);
			if (urb->status == -EINPROGRESS) {
				/* This request is successfully completed. */
				/* If not -EINPROGRESS, possibly unlinked. */
				urb->status = 0;
			}
			spin_unlock (&urb->lock);

			goto no_need_xmit;

		case USB_REQ_GET_DESCRIPTOR:
			if (ctrlreq->wValue == (USB_DT_DEVICE << 8))
				LOG("Get_Descriptor to device 0 (get max pipe size)\n");
			goto out;

		default:
			/* NOT REACHED */
			LOG("invalid request to devnum 0 bRequest %u, wValue %u\n",
			          ctrlreq->bRequest, ctrlreq->wValue);
			ret = -EINVAL;
			goto no_need_xmit;
		}
	}

out:
	if (urb->status != -EINPROGRESS) {
		LOG("URB already unlinked!, status %d\n", urb->status);
		return urb->status;
	}

	if (usb_pipeisoc(urb->pipe)) {
		LOG("ISO URBs not supported");
		ret = -EINVAL;
		goto no_need_xmit;
	}

	urb->hcpriv = (void *) hcd_to_vhcd(hcd);
	LOG("hcpriv %p", urb->hcpriv);

	transfer_flags = urb->transfer_flags;
	usb_get_urb(urb);

#if 0
	d_urb->type              = usb_pipetype(urb->pipe);
	d_urb->dev_id            = data->gadget[urb->dev->portnum-1].id;
	d_urb->endpoint          = usb_pipeendpoint(urb->pipe);
	d_urb->direction         = 0 || usb_pipein(urb->pipe);
	d_urb->interval          = urb->interval;
	d_urb->transfer_flags    = urb->transfer_flags;
	d_urb->number_of_packets = urb->number_of_packets;
	d_urb->priv              = priv;
	d_urb->size              = urb->transfer_buffer_length; 
	d_urb->data			     = urb->transfer_buffer;
	d_urb->phys_addr	     = d_urb->data?virt_to_phys(d_urb->data):0;


	if (urb->setup_packet) {
		memcpy(d_urb->setup_packet, urb->setup_packet, 8);
	}

	/* XXX ISO ? */
//	if (urb->number_of_packets)
//		memcpy(d_urb->iso_desc, urb->iso_frame_desc, urb->number_of_packets*sizeof(struct usb_iso_packet_descriptor));

	ret = libddeusb_submit_d_urb(d_urb);
#else
	unsigned port_num = urb->dev->portnum;

	switch (usb_pipetype(urb->pipe)) {

	case PIPE_CONTROL:
		{
			struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)
			                               urb->setup_packet;
			dde_linux26_usb_vhcd_submit_control_urb_cb(port_num,
			                                           usb_pipeendpoint(urb->pipe),
			                                           usb_pipein(urb->pipe),
			                                           urb, /* handle */
			                                           sizeof(*req), req);
		}
		break;

	case PIPE_INTERRUPT:
		printk(" int\n");
//	dde_linux26_usb_vhcd_submit_urb(urb->transfer_buffer,
//	                                urb->transfer_buffer_length);
		return -EINVAL;
		break;

	/* unsupported transfer types */
	case PIPE_BULK:
		printk(" bulk\n");
		return -EINVAL;
	case PIPE_ISOCHRONOUS:
		printk(" isoc\n");
		return -EINVAL;
	}
#endif

//	if (ret) {
//		LOG("URB SUBMIT FAILED (%d).",ret);
//		/* s.t. went wrong. */	
//		spin_lock_irqsave(&data->lock, flags);  
//		data->rcv_buf[i]=NULL;
//		spin_unlock_irqrestore(&data->lock, flags);
//		down(&data->rcv_buf_free);
//		kmem_cache_free(priv_cache, urb->hcpriv);
//		usb_put_urb(urb);
//		urb->status = ret;
//		urb->hcpriv = NULL;
//		libddeusb_free_d_urb(d_urb);
//		return ret;
//	}

	LOG("URB %p submitted", urb);

	return 0;

no_need_xmit:
	usb_hcd_giveback_urb(hcd, urb);
	return 0;
}
Exemple #12
0
static inline struct debug_stats *stats_for_urb(struct imx21 *imx21,
	struct urb *urb)
{
	return usb_pipeisoc(urb->pipe) ?
		&imx21->isoc_stats : &imx21->nonisoc_stats;
}
Exemple #13
0
/*
  Set up PTD's.
*/
static void prepare_ptd(struct isp1362_hcd *isp1362_hcd, struct urb *urb,
			struct isp1362_ep *ep, struct isp1362_ep_queue *epq,
			u16 fno)
{
	struct ptd *ptd;
	int toggle;
	int dir;
	u16 len;
	size_t buf_len = urb->transfer_buffer_length - urb->actual_length;

	DBG(3, "%s: %s ep %p\n", __func__, epq->name, ep);

	ptd = &ep->ptd;

	ep->data = (unsigned char *)urb->transfer_buffer + urb->actual_length;

	switch (ep->nextpid) {
	case USB_PID_IN:
		toggle = usb_gettoggle(urb->dev, ep->epnum, 0);
		dir = PTD_DIR_IN;
		if (usb_pipecontrol(urb->pipe)) {
			len = min_t(size_t, ep->maxpacket, buf_len);
		} else if (usb_pipeisoc(urb->pipe)) {
			len = min_t(size_t, urb->iso_frame_desc[fno].length, MAX_XFER_SIZE);
			ep->data = urb->transfer_buffer + urb->iso_frame_desc[fno].offset;
		} else
			len = max_transfer_size(epq, buf_len, ep->maxpacket);
		DBG(1, "%s: IN    len %d/%d/%d from URB\n", __func__, len, ep->maxpacket,
		    (int)buf_len);
		break;
	case USB_PID_OUT:
		toggle = usb_gettoggle(urb->dev, ep->epnum, 1);
		dir = PTD_DIR_OUT;
		if (usb_pipecontrol(urb->pipe))
			len = min_t(size_t, ep->maxpacket, buf_len);
		else if (usb_pipeisoc(urb->pipe))
			len = min_t(size_t, urb->iso_frame_desc[0].length, MAX_XFER_SIZE);
		else
			len = max_transfer_size(epq, buf_len, ep->maxpacket);
		if (len == 0)
			pr_info("%s: Sending ZERO packet: %d\n", __func__,
			     urb->transfer_flags & URB_ZERO_PACKET);
		DBG(1, "%s: OUT   len %d/%d/%d from URB\n", __func__, len, ep->maxpacket,
		    (int)buf_len);
		break;
	case USB_PID_SETUP:
		toggle = 0;
		dir = PTD_DIR_SETUP;
		len = sizeof(struct usb_ctrlrequest);
		DBG(1, "%s: SETUP len %d\n", __func__, len);
		ep->data = urb->setup_packet;
		break;
	case USB_PID_ACK:
		toggle = 1;
		len = 0;
		dir = (urb->transfer_buffer_length && usb_pipein(urb->pipe)) ?
			PTD_DIR_OUT : PTD_DIR_IN;
		DBG(1, "%s: ACK   len %d\n", __func__, len);
		break;
	default:
		toggle = dir = len = 0;
		pr_err("%s@%d: ep->nextpid %02x\n", __func__, __LINE__, ep->nextpid);
		BUG_ON(1);
	}

	ep->length = len;
	if (!len)
		ep->data = NULL;

	ptd->count = PTD_CC_MSK | PTD_ACTIVE_MSK | PTD_TOGGLE(toggle);
	ptd->mps = PTD_MPS(ep->maxpacket) | PTD_SPD(urb->dev->speed == USB_SPEED_LOW) |
		PTD_EP(ep->epnum);
	ptd->len = PTD_LEN(len) | PTD_DIR(dir);
	ptd->faddr = PTD_FA(usb_pipedevice(urb->pipe));

	if (usb_pipeint(urb->pipe)) {
		ptd->faddr |= PTD_SF_INT(ep->branch);
		ptd->faddr |= PTD_PR(ep->interval ? __ffs(ep->interval) : 0);
	}
	if (usb_pipeisoc(urb->pipe))
		ptd->faddr |= PTD_SF_ISO(fno);

	DBG(1, "%s: Finished\n", __func__);
}
Exemple #14
0
static void stub_recv_cmd_submit(struct stub_device *sdev, struct usbip_header *pdu)
{
	int ret;
	struct stub_priv *priv;
	struct usbip_device *ud = &sdev->ud;
	struct usb_device *udev = interface_to_usbdev(sdev->interface);
	int pipe = get_pipe(sdev, pdu->base.ep, pdu->base.direction);


	priv = stub_priv_alloc(sdev, pdu);
	if (!priv)
		return;

	/* setup a urb */
	if (usb_pipeisoc(pipe))
		priv->urb = usb_alloc_urb(pdu->u.cmd_submit.number_of_packets, GFP_KERNEL);
	else
		priv->urb = usb_alloc_urb(0, GFP_KERNEL);

	if (!priv->urb) {
		uerr("malloc urb\n");
		usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
		return;
	}

	/* set priv->urb->transfer_buffer */
	if (pdu->u.cmd_submit.transfer_buffer_length > 0) {
		priv->urb->transfer_buffer =
			kzalloc(pdu->u.cmd_submit.transfer_buffer_length, GFP_KERNEL);
		if (!priv->urb->transfer_buffer) {
			uerr("malloc x_buff\n");
			usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
			return;
		}
	}

	/* set priv->urb->setup_packet */
	priv->urb->setup_packet = kzalloc(8, GFP_KERNEL);
	if (!priv->urb->setup_packet) {
		uerr("allocate setup_packet\n");
		usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
		return;
	}
	memcpy(priv->urb->setup_packet, &pdu->u.cmd_submit.setup, 8);

	/* set other members from the base header of pdu */
	priv->urb->context                = (void *) priv;
	priv->urb->dev                    = udev;
	priv->urb->pipe                   = pipe;
	priv->urb->complete               = stub_complete;

	usbip_pack_pdu(pdu, priv->urb, USBIP_CMD_SUBMIT, 0);


	if (usbip_recv_xbuff(ud, priv->urb) < 0)
		return;

	if (usbip_recv_iso(ud, priv->urb) < 0)
		return;

	/* no need to submit an intercepted request, but harmless? */
	tweak_special_requests(priv->urb);

	/* urb is now ready to submit */
	ret = usb_submit_urb(priv->urb, GFP_KERNEL);

	if (ret == 0)
		dbg_stub_rx("submit urb ok, seqnum %u\n", pdu->base.seqnum);
	else {
		uerr("submit_urb error, %d\n", ret);
		usbip_dump_header(pdu);
		usbip_dump_urb(priv->urb);

		/*
		 * Pessimistic.
		 * This connection will be discarded.
		 */
		usbip_event_add(ud, SDEV_EVENT_ERROR_SUBMIT);
	}

	dbg_stub_rx("Leave\n");
	return;
}