/*
* Create the demo tasks then start the scheduler.
*/
int main( void )
{
/* Configure any hardware required for this demo. */
prvSetupHardware();
/* Create the LCD task - this returns the queue to use when writing
messages to the LCD. */
xLCDQueue = xStartLCDTask();
/* Create all the other standard demo tasks. */
vStartLEDFlashTasks( tskIDLE_PRIORITY );
vCreateBlockTimeTasks();
vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
vStartGenericQueueTasks( mainGEN_QUEUE_TASK_PRIORITY );
vStartQueuePeekTasks();
vAltStartComTestTasks( mainCOM_TEST_PRIORITY, mainCOM_TEST_BAUD_RATE, mainCOM_TEST_LED );
vStartInterruptQueueTasks();
/* Create the tasks defined within this file. */
xTaskCreate( prvTestTask1, "Tst1", configMINIMAL_STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );
xTaskCreate( prvTestTask2, "Tst2", configMINIMAL_STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );
/* prvCheckTask uses sprintf so requires more stack. */
xTaskCreate( prvCheckTask, "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );
/* Finally start the scheduler. */
vTaskStartScheduler();
/* Will only reach here if there is insufficient heap available to start
the scheduler. */
return 0;
}
/*
* Create the demo tasks then start the scheduler.
*/
int main_full( void )
{
TimerHandle_t xTimer = NULL;
/* Create the LCD task - this returns the queue to use when writing
messages to the LCD. */
xLCDQueue = xStartLCDTask();
/* Create all the other standard demo tasks. */
vStartLEDFlashTimers( mainNUM_FLASH_TIMER_LEDS );
vCreateBlockTimeTasks();
vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
vStartGenericQueueTasks( mainGEN_QUEUE_TASK_PRIORITY );
vStartQueuePeekTasks();
vStartInterruptQueueTasks();
/* Create the tasks defined within this file. */
xTaskCreate( prvRegTestTask1, "Reg1", configMINIMAL_STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );
xTaskCreate( prvRegTestTask2, "Reg2", configMINIMAL_STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );
/* The PIC32MX795 uses an 8 deep fifo where TX interrupts are asserted
whilst the TX buffer is empty. This causes an issue with the test driver so
it is not used in this demo */
#if !defined(__32MX795F512L__)
vAltStartComTestTasks( mainCOM_TEST_PRIORITY, mainCOM_TEST_BAUD_RATE, mainCOM_TEST_LED );
#endif
/* Create the software timer that performs the 'check' functionality, as
described at the top of this file. */
xTimer = xTimerCreate( "CheckTimer",/* A text name, purely to help debugging. */
( mainCHECK_TIMER_PERIOD_MS ), /* The timer period, in this case 3000ms (3s). */
pdTRUE, /* This is an auto-reload timer, so xAutoReload is set to pdTRUE. */
( void * ) 0, /* The ID is not used, so can be set to anything. */
prvCheckTimerCallback /* The callback function that inspects the status of all the other tasks. */
);
if( xTimer != NULL )
{
xTimerStart( xTimer, mainDONT_BLOCK );
}
/* A software timer is also used to start the high frequency timer test.
This is to ensure the test does not start before the kernel. This time a
one shot software timer is used. */
xTimer = xTimerCreate( "HighHzTimerSetup", 1, pdFALSE, ( void * ) 0, prvSetupHighFrequencyTimerTest );
if( xTimer != NULL )
{
xTimerStart( xTimer, mainDONT_BLOCK );
}
/* Finally start the scheduler. */
vTaskStartScheduler();
/* If all is well, the scheduler will now be running, and the following line
will never be reached. If the following line does execute, then there was
insufficient FreeRTOS heap memory available for the idle and/or timer tasks
to be created. See the memory management section on the FreeRTOS web site
for more details. */
for( ;; );
}
/*
* Create the demo tasks then start the scheduler.
*/
int main_full( void )
{
xTimerHandle xTimer = NULL;
/* Create all the other standard demo tasks. */
vStartLEDFlashTimers( mainNUM_FLASH_TIMER_LEDS );
vCreateBlockTimeTasks();
vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
vStartGenericQueueTasks( mainGEN_QUEUE_TASK_PRIORITY );
vStartQueuePeekTasks();
vStartInterruptQueueTasks();
vStartISRTriggeredTask();
vStartCountingSemaphoreTasks();
vStartDynamicPriorityTasks();
vStartQueueOverwriteTask( mainQUEUE_OVERWRITE_TASK_PRIORITY );
vStartQueueSetTasks();
vStartRecursiveMutexTasks();
/* Create the tasks defined within this file. */
xTaskCreate( prvRegTestTask1, /* The function that implements the task. */
"Reg1", /* Text name for the task to assist debugger - not used by FreeRTOS itself. */
configMINIMAL_STACK_SIZE, /* The stack size to allocate for the task - specified in words not bytes. */
NULL, /* The parameter to pass into the task - not used in this case so set to NULL. */
tskIDLE_PRIORITY, /* The priority to assign to the task. */
NULL ); /* Used to obtain a handle to the task being created - not used in this case so set to NULL. */
xTaskCreate( prvRegTestTask2, "Reg2", configMINIMAL_STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );
/* Create the software timer that performs the 'check' functionality, as
described at the top of this file. */
xTimer = xTimerCreate( "CheckTimer",/* A text name, purely to help debugging. */
( mainCHECK_TIMER_PERIOD_MS ), /* The timer period, in this case 3000ms (3s). */
pdTRUE, /* This is an auto-reload timer, so xAutoReload is set to pdTRUE. */
( void * ) 0, /* The ID is not used, so can be set to anything. */
prvCheckTimerCallback ); /* The callback function that inspects the status of all the other tasks. */
if( xTimer != NULL )
{
xTimerStart( xTimer, mainDONT_BLOCK );
}
/* A software timer is also used to start the high frequency timer test.
This is to ensure the test does not start before the kernel. This time a
one shot software timer is used. */
xTimer = xTimerCreate( "HighHzTimerSetup", 1, pdFALSE, ( void * ) 0, prvSetupHighFrequencyTimerTest );
if( xTimer != NULL )
{
xTimerStart( xTimer, mainDONT_BLOCK );
}
/* Finally start the scheduler. */
vTaskStartScheduler();
/* If all is well, the scheduler will now be running, and the following line
will never be reached. If the following line does execute, then there was
insufficient FreeRTOS heap memory available for the idle and/or timer tasks
to be created. See the memory management section on the FreeRTOS web site
for more details. http://www.freertos.org/a00111.html */
for( ;; );
}
void main_full( void )
{
/* This demo sets the clock to its maximum. The blinky demo uses as slower
clock as it uses low power features. */
prvConfigureClocks();
/* Init the serial port for use by the CLI. The baud rate parameter is not
used so set to 0 to make this obvious. */
xSerialPortInitMinimal( 0, mainRX_QUEUE_LENGTH );
/* Start all the other standard demo/test tasks. They have no particular
functionality, but do demonstrate how to use the FreeRTOS API and test the
kernel port. */
vStartInterruptQueueTasks();
vStartCountingSemaphoreTasks();
vStartGenericQueueTasks( tskIDLE_PRIORITY );
vStartRecursiveMutexTasks();
vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
vStartTimerDemoTask( mainTIMER_TEST_PERIOD );
vStartEventGroupTasks();
vStartTaskNotifyTask();
vStartInterruptSemaphoreTasks();
/* Note - the set of standard demo tasks contains two versions of
vStartMathTasks.c. One is defined in flop.c, and uses double precision
floating point numbers and variables. The other is defined in sp_flop.c,
and uses single precision floating point numbers and variables. sp_flop.
c should be included in this project. */
vStartMathTasks( mainFLOP_TASK_PRIORITY );
/* Start the tasks that implements the command console on the UART, as
described above. */
vUARTCommandConsoleStart( mainUART_COMMAND_CONSOLE_STACK_SIZE, mainUART_COMMAND_CONSOLE_TASK_PRIORITY );
/* Register the standard CLI commands. */
vRegisterSampleCLICommands();
/* Create the register check tasks, as described at the top of this file */
xTaskCreate( prvRegTestTaskEntry1, "Reg1", configMINIMAL_STACK_SIZE, mainREG_TEST_TASK_1_PARAMETER, tskIDLE_PRIORITY, NULL );
xTaskCreate( prvRegTestTaskEntry2, "Reg2", configMINIMAL_STACK_SIZE, mainREG_TEST_TASK_2_PARAMETER, tskIDLE_PRIORITY, NULL );
/* Create the task that performs the 'check' functionality, as described at
the top of this file. */
xTaskCreate( prvCheckTask, "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );
/* Start the scheduler. */
vTaskStartScheduler();
/* If all is well, the scheduler will now be running, and the following
line will never be reached. If the following line does execute, then
there was either insufficient FreeRTOS heap memory available for the idle
and/or timer tasks to be created, or vTaskStartScheduler() was called from
User mode. See the memory management section on the FreeRTOS web site for
more details on the FreeRTOS heap http://www.freertos.org/a00111.html. The
mode from which main() is called is set in the C start up code and must be
a privileged mode (not user mode). */
for( ;; );
}
/*************************************************************************
* Please ensure to read http://www.freertos.org/portlm3sx965.html
* which provides information on configuring and running this demo for the
* various Luminary Micro EKs.
*************************************************************************/
int main( void )
{
prvSetupHardware();
/* Create the queue used by the OLED task. Messages for display on the OLED
are received via this queue. */
xOLEDQueue = xQueueCreate( mainOLED_QUEUE_SIZE, sizeof( xOLEDMessage ) );
/* Start the standard demo tasks. */
vStartIntegerMathTasks( mainINTEGER_TASK_PRIORITY );
vStartGenericQueueTasks( mainGEN_QUEUE_TASK_PRIORITY );
vStartInterruptQueueTasks();
vStartRecursiveMutexTasks();
vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
vCreateBlockTimeTasks();
vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );
vStartQueuePeekTasks();
vStartQueueSetTasks();
vStartEventGroupTasks();
/* Exclude some tasks if using the kickstart version to ensure we stay within
the 32K code size limit. */
#if mainINCLUDE_WEB_SERVER != 0
{
/* Create the uIP task if running on a processor that includes a MAC and
PHY. */
if( SysCtlPeripheralPresent( SYSCTL_PERIPH_ETH ) )
{
xTaskCreate( vuIP_Task, "uIP", mainBASIC_WEB_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY - 1, NULL );
}
}
#endif
/* Start the tasks defined within this file/specific to this demo. */
xTaskCreate( vOLEDTask, "OLED", mainOLED_TASK_STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );
/* The suicide tasks must be created last as they need to know how many
tasks were running prior to their creation in order to ascertain whether
or not the correct/expected number of tasks are running at any given time. */
vCreateSuicidalTasks( mainCREATOR_TASK_PRIORITY );
/* Configure the high frequency interrupt used to measure the interrupt
jitter time. */
vSetupHighFrequencyTimer();
/* Start the scheduler. */
vTaskStartScheduler();
/* Will only get here if there was insufficient memory to create the idle
task. */
return 0;
}
int main(void)
{
extern void HardwareSetup( void );
/* Renesas provided CPU configuration routine. The clocks are configured in
here. */
HardwareSetup();
/* Turn all LEDs off. */
vParTestInitialise();
/* Start the reg test tasks which test the context switching mechanism. */
xTaskCreate( prvRegTest1Task, "RegTst1", configMINIMAL_STACK_SIZE, ( void * ) mainREG_TEST_1_PARAMETER, tskIDLE_PRIORITY, NULL );
xTaskCreate( prvRegTest2Task, "RegTst2", configMINIMAL_STACK_SIZE, ( void * ) mainREG_TEST_2_PARAMETER, tskIDLE_PRIORITY, NULL );
/* The web server task. */
xTaskCreate( vuIP_Task, "uIP", mainuIP_STACK_SIZE, NULL, mainuIP_TASK_PRIORITY, NULL );
/* Start the check task as described at the top of this file. */
xTaskCreate( prvCheckTask, "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );
/* Create the standard demo tasks. */
vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
vCreateBlockTimeTasks();
vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );
vStartIntegerMathTasks( mainINTEGER_TASK_PRIORITY );
vStartGenericQueueTasks( mainGEN_QUEUE_TASK_PRIORITY );
vStartLEDFlashTasks( mainFLASH_TASK_PRIORITY );
vStartQueuePeekTasks();
vStartRecursiveMutexTasks();
vStartInterruptQueueTasks();
vStartMathTasks( mainFLOP_TASK_PRIORITY );
/* The suicide tasks must be created last as they need to know how many
tasks were running prior to their creation in order to ascertain whether
or not the correct/expected number of tasks are running at any given time. */
vCreateSuicidalTasks( mainCREATOR_TASK_PRIORITY );
/* Start the tasks running. */
vTaskStartScheduler();
/* If all is well we will never reach here as the scheduler will now be
running. If we do reach here then it is likely that there was insufficient
heap available for the idle task to be created. */
for( ;; );
return 0;
}
void main_full( void )
{
/* Start all the other standard demo/test tasks. They have no particular
functionality, but do demonstrate how to use the FreeRTOS API and test the
kernel port. */
vStartInterruptQueueTasks();
vStartDynamicPriorityTasks();
vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
vCreateBlockTimeTasks();
vStartCountingSemaphoreTasks();
vStartGenericQueueTasks( tskIDLE_PRIORITY );
vStartRecursiveMutexTasks();
vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
vStartMathTasks( mainFLOP_TASK_PRIORITY );
vStartTimerDemoTask( mainTIMER_TEST_PERIOD );
vStartQueueOverwriteTask( mainQUEUE_OVERWRITE_PRIORITY );
vStartEventGroupTasks();
vStartInterruptSemaphoreTasks();
vStartQueueSetTasks();
vStartTaskNotifyTask();
/* Create the register check tasks, as described at the top of this file */
xTaskCreate( prvRegTestTaskEntry1, "Reg1", configMINIMAL_STACK_SIZE, mainREG_TEST_TASK_1_PARAMETER, tskIDLE_PRIORITY, NULL );
xTaskCreate( prvRegTestTaskEntry2, "Reg2", configMINIMAL_STACK_SIZE, mainREG_TEST_TASK_2_PARAMETER, tskIDLE_PRIORITY, NULL );
/* Create the task that performs the 'check' functionality, as described at
the top of this file. */
xTaskCreate( prvCheckTask, "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );
/* The set of tasks created by the following function call have to be
created last as they keep account of the number of tasks they expect to see
running. */
vCreateSuicidalTasks( mainCREATOR_TASK_PRIORITY );
/* Start the scheduler. */
vTaskStartScheduler();
/* If all is well, the scheduler will now be running, and the following
line will never be reached. If the following line does execute, then
there was either insufficient FreeRTOS heap memory available for the idle
and/or timer tasks to be created, or vTaskStartScheduler() was called from
User mode. See the memory management section on the FreeRTOS web site for
more details on the FreeRTOS heap http://www.freertos.org/a00111.html. The
mode from which main() is called is set in the C start up code and must be
a privileged mode (not user mode). */
for( ;; );
}
void main( void )
{
/* Place your initialization/startup code here (e.g. MyInst_Start()) */
prvHardwareSetup();
/* Start the standard demo tasks. These are just here to exercise the
kernel port and provide examples of how the FreeRTOS API can be used. */
vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
vCreateBlockTimeTasks();
vStartCountingSemaphoreTasks();
vStartDynamicPriorityTasks();
vStartMathTasks( mainINTEGER_TASK_PRIORITY );
vStartGenericQueueTasks( mainGEN_QUEUE_TASK_PRIORITY );
vStartIntegerMathTasks( mainINTEGER_TASK_PRIORITY );
vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );
vStartQueuePeekTasks();
vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
vStartLEDFlashTasks( mainFLASH_TEST_TASK_PRIORITY );
vAltStartComTestTasks( mainCOM_TEST_TASK_PRIORITY, 57600, mainCOM_LED );
vStartInterruptQueueTasks();
/* Start the error checking task. */
( void ) xTaskCreate( vCheckTask, ( signed portCHAR * ) "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );
/* Configure the timers used by the fast interrupt timer test. */
vSetupTimerTest();
/* The suicide tasks must be created last as they need to know how many
tasks were running prior to their creation in order to ascertain whether
or not the correct/expected number of tasks are running at any given time. */
vCreateSuicidalTasks( mainCREATOR_TASK_PRIORITY );
/* Will only get here if there was insufficient memory to create the idle
task. The idle task is created within vTaskStartScheduler(). */
vTaskStartScheduler();
/* Should never reach here as the kernel will now be running. If
vTaskStartScheduler() does return then it is very likely that there was
insufficient (FreeRTOS) heap space available to create all the tasks,
including the idle task that is created within vTaskStartScheduler() itself. */
for( ;; );
}
void main_full( void )
{
/* Start all the other standard demo/test tasks. The have not particular
functionality, but do demonstrate how to use the FreeRTOS API and test the
kernel port. */
vStartInterruptQueueTasks();
vStartIntegerMathTasks( tskIDLE_PRIORITY );
vStartDynamicPriorityTasks();
vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
vCreateBlockTimeTasks();
vStartCountingSemaphoreTasks();
vStartGenericQueueTasks( tskIDLE_PRIORITY );
vStartRecursiveMutexTasks();
vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );
vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
vAltStartComTestTasks( mainCOM_TEST_PRIORITY, mainCOM_TEST_BAUD_RATE, mainCOM_TEST_LED );
vStartQueueSetTasks();
vStartTaskNotifyTask();
vStartTimerDemoTask( mainTIMER_TEST_PERIOD );
vStartEventGroupTasks();
vStartInterruptSemaphoreTasks();
/* The set of tasks created by the following function call have to be
created last as they keep account of the number of tasks they expect to see
running. */
vCreateSuicidalTasks( mainCREATOR_TASK_PRIORITY );
/* Start the scheduler. */
vTaskStartScheduler();
/* If all is well, the scheduler will now be running, and the following line
will never be reached. If the following line does execute, then there was
insufficient FreeRTOS heap memory available for the idle and/or timer tasks
to be created. See the memory management section on the FreeRTOS web site
for more details. */
for( ;; );
}
int main_full( void )
{
/* Usage instructions on http://www.FreeRTOS.org/Atmel_SAM4E_RTOS_Demo.html */
/* Initialise the LCD and output a bitmap. The IP address will also be
displayed on the LCD when it has been obtained. */
vInitialiseLCD();
/* If the file system is only going to be accessed from one task then
F_FS_THREAD_AWARE can be set to 0 and the set of example files are created
before the RTOS scheduler is started. If the file system is going to be
access from more than one task then F_FS_THREAD_AWARE must be set to 1 and
the set of sample files are created from the idle task hook function
vApplicationIdleHook(). */
#if( F_FS_THREAD_AWARE == 0 )
{
/* Initialise the drive and file system, then create a few example
files. The files can be viewed and accessed via the CLI. View the
documentation page for this demo (link at the top of this file) for more
information. */
vCreateAndVerifySampleFiles();
}
#endif
/* Register example generic, file system related and UDP related CLI
commands respectively. Type 'help' into the command console to view a list
of registered commands. */
vRegisterSampleCLICommands();
vRegisterFileSystemCLICommands();
vRegisterUDPCLICommands();
/* Initialise the network interface. Tasks that use the network are
created in the network event hook when the network is connected and ready
for use. The address values passed in here are used if ipconfigUSE_DHCP is
set to 0, or if ipconfigUSE_DHCP is set to 1 but a DHCP server cannot be
contacted. The IP address actually used is displayed on the LCD (after DHCP
has completed if DHCP is used). */
FreeRTOS_IPInit( ucIPAddress, ucNetMask, ucGatewayAddress, ucDNSServerAddress, ucMACAddress );
/* Create all the other standard demo tasks. */
vCreateBlockTimeTasks();
vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
vStartGenericQueueTasks( mainGEN_QUEUE_TASK_PRIORITY );
vStartQueuePeekTasks();
vStartCountingSemaphoreTasks();
vStartDynamicPriorityTasks();
vStartQueueOverwriteTask( mainQUEUE_OVERWRITE_TASK_PRIORITY );
vStartQueueSetTasks();
vStartRecursiveMutexTasks();
vStartEventGroupTasks();
vStartTaskNotifyTask();
vStartInterruptSemaphoreTasks();
vStartTimerDemoTask( mainTIMER_TEST_PERIOD );
vStartInterruptQueueTasks();
/* Create the register check tasks, as described at the top of this
file */
xTaskCreate( prvRegTest1Task, "Reg1", configMINIMAL_STACK_SIZE, ( void * ) NULL, tskIDLE_PRIORITY, NULL );
xTaskCreate( prvRegTest2Task, "Reg2", configMINIMAL_STACK_SIZE, ( void * ) NULL, tskIDLE_PRIORITY, NULL );
/* Start the scheduler itself. */
vTaskStartScheduler();
/* If all is well, the scheduler will now be running, and the following line
will never be reached. If the following line does execute, then there was
insufficient FreeRTOS heap memory available for the idle and/or timer tasks
to be created. See the memory management section on the FreeRTOS web site
for more details. */
for( ;; );
}
void main_full( void )
{
xTimerHandle xCheckTimer = NULL;
/* The register test tasks are asm functions that don't use a stack. The
stack allocated just has to be large enough to hold the task context, and
for the additional required for the stack overflow checking to work (if
configured). */
const size_t xRegTestStackSize = 25U;
/* Create the standard demo tasks, including the interrupt nesting test
tasks. */
vStartInterruptQueueTasks();
vCreateBlockTimeTasks();
vStartCountingSemaphoreTasks();
vStartRecursiveMutexTasks();
/* Create the register test tasks as described at the top of this file.
These are naked functions that don't use any stack. A stack still has
to be allocated to hold the task context. */
xTaskCreate( vRegTest1Task, /* Function that implements the task. */
( signed char * ) "Reg1", /* Text name of the task. */
xRegTestStackSize, /* Stack allocated to the task. */
NULL, /* The task parameter is not used. */
tskIDLE_PRIORITY, /* The priority to assign to the task. */
NULL ); /* Don't receive a handle back, it is not needed. */
xTaskCreate( vRegTest2Task, /* Function that implements the task. */
( signed char * ) "Reg2", /* Text name of the task. */
xRegTestStackSize, /* Stack allocated to the task. */
NULL, /* The task parameter is not used. */
tskIDLE_PRIORITY, /* The priority to assign to the task. */
NULL ); /* Don't receive a handle back, it is not needed. */
/* Create the software timer that performs the 'check' functionality,
as described at the top of this file. */
xCheckTimer = xTimerCreate( ( const signed char * ) "CheckTimer",/* A text name, purely to help debugging. */
( mainCHECK_TIMER_PERIOD_MS ), /* The timer period, in this case 3000ms (3s). */
pdTRUE, /* This is an auto-reload timer, so xAutoReload is set to pdTRUE. */
( void * ) 0, /* The ID is not used, so can be set to anything. */
prvCheckTimerCallback /* The callback function that inspects the status of all the other tasks. */
);
/* If the software timer was created successfully, start it. It won't
actually start running until the scheduler starts. A block time of
zero is used in this call, although any value could be used as the block
time will be ignored because the scheduler has not started yet. */
if( xCheckTimer != NULL )
{
xTimerStart( xCheckTimer, mainDONT_BLOCK );
}
/* Start the kernel. From here on, only tasks and interrupts will run. */
vTaskStartScheduler();
/* If all is well, the scheduler will now be running, and the following
line will never be reached. If the following line does execute, then there
was insufficient FreeRTOS heap memory available for the idle and/or timer
tasks to be created. See the memory management section on the FreeRTOS web
site, or the FreeRTOS tutorial books for more details. */
for( ;; );
}
