static int dvb_register(struct cx8802_dev *dev)
{
/* init struct videobuf_dvb */
dev->dvb.name = dev->core->name;
dev->ts_gen_cntrl = 0x0c;
/* init frontend */
switch (dev->core->board) {
#if HAVE_CX22702
case CX88_BOARD_HAUPPAUGE_DVB_T1:
dev->dvb.frontend = cx22702_attach(&hauppauge_novat_config,
&dev->core->i2c_adap);
break;
case CX88_BOARD_CONEXANT_DVB_T1:
dev->dvb.frontend = cx22702_attach(&connexant_refboard_config,
&dev->core->i2c_adap);
break;
#endif
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1:
dev->core->pll_addr = 0x61;
dev->core->pll_desc = &dvb_pll_lg_z201;
dev->dvb.frontend = mt352_attach(&dvico_fusionhdtv,
&dev->core->i2c_adap);
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS:
dev->core->pll_addr = 0x60;
dev->core->pll_desc = &dvb_pll_thomson_dtt7579;
dev->dvb.frontend = mt352_attach(&dvico_fusionhdtv,
&dev->core->i2c_adap);
break;
case CX88_BOARD_KWORLD_DVB_T:
case CX88_BOARD_DNTV_LIVE_DVB_T:
dev->core->pll_addr = 0x61;
dev->core->pll_desc = &dvb_pll_unknown_1;
dev->dvb.frontend = mt352_attach(&dntv_live_dvbt_config,
&dev->core->i2c_adap);
break;
#if HAVE_OR51132
case CX88_BOARD_PCHDTV_HD3000:
dev->dvb.frontend = or51132_attach(&pchdtv_hd3000,
&dev->core->i2c_adap);
break;
#endif
default:
printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n",
dev->core->name);
break;
}
if (NULL == dev->dvb.frontend) {
printk("%s: frontend initialization failed\n",dev->core->name);
return -1;
}
if (dev->core->pll_desc) {
dev->dvb.frontend->ops->info.frequency_min = dev->core->pll_desc->min;
dev->dvb.frontend->ops->info.frequency_max = dev->core->pll_desc->max;
}
/* Copy the board name into the DVB structure */
strlcpy(dev->dvb.frontend->ops->info.name,
cx88_boards[dev->core->board].name,
sizeof(dev->dvb.frontend->ops->info.name));
/* register everything */
return videobuf_dvb_register(&dev->dvb, THIS_MODULE, dev);
}
static int philips_fmd1216_pll_init(struct dvb_frontend *fe)
{
struct cx8802_dev *dev= fe->dvb->priv;
/* this message is to set up ATC and ALC */
static u8 fmd1216_init[] = { 0x0b, 0xdc, 0x9c, 0xa0 };
struct i2c_msg msg =
{ .addr = dev->core->pll_addr, .flags = 0,
.buf = fmd1216_init, .len = sizeof(fmd1216_init) };
int err;
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
if ((err = i2c_transfer(&dev->core->i2c_adap, &msg, 1)) != 1) {
if (err < 0)
return err;
else
return -EREMOTEIO;
}
return 0;
}
static int dntv_live_dvbt_pro_tuner_set_params(struct dvb_frontend* fe,
struct dvb_frontend_parameters* params)
{
struct cx8802_dev *dev= fe->dvb->priv;
u8 buf[4];
struct i2c_msg msg =
{ .addr = dev->core->pll_addr, .flags = 0,
.buf = buf, .len = 4 };
int err;
/* Switch PLL to DVB mode */
err = philips_fmd1216_pll_init(fe);
if (err)
return err;
/* Tune PLL */
dvb_pll_configure(dev->core->pll_desc, buf,
params->frequency,
params->u.ofdm.bandwidth);
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
if ((err = i2c_transfer(&dev->core->i2c_adap, &msg, 1)) != 1) {
printk(KERN_WARNING "cx88-dvb: %s error "
"(addr %02x <- %02x, err = %i)\n",
__FUNCTION__, dev->core->pll_addr, buf[0], err);
if (err < 0)
return err;
else
return -EREMOTEIO;
}
return 0;
}
static struct mt352_config dntv_live_dvbt_pro_config = {
.demod_address = 0x0f,
.no_tuner = 1,
.demod_init = dntv_live_dvbt_pro_demod_init,
};
#endif
static struct zl10353_config dvico_fusionhdtv_hybrid = {
.demod_address = 0x0f,
.no_tuner = 1,
};
static struct zl10353_config dvico_fusionhdtv_plus_v1_1 = {
.demod_address = 0x0f,
};
static struct cx22702_config connexant_refboard_config = {
.demod_address = 0x43,
.output_mode = CX22702_SERIAL_OUTPUT,
};
static struct cx22702_config hauppauge_hvr_config = {
.demod_address = 0x63,
.output_mode = CX22702_SERIAL_OUTPUT,
};
static int or51132_set_ts_param(struct dvb_frontend* fe, int is_punctured)
{
struct cx8802_dev *dev= fe->dvb->priv;
dev->ts_gen_cntrl = is_punctured ? 0x04 : 0x00;
return 0;
}
static struct or51132_config pchdtv_hd3000 = {
.demod_address = 0x15,
.set_ts_params = or51132_set_ts_param,
};
static int lgdt330x_pll_rf_set(struct dvb_frontend* fe, int index)
{
struct cx8802_dev *dev= fe->dvb->priv;
struct cx88_core *core = dev->core;
dprintk(1, "%s: index = %d\n", __FUNCTION__, index);
if (index == 0)
cx_clear(MO_GP0_IO, 8);
else
cx_set(MO_GP0_IO, 8);
return 0;
}
static int lgdt330x_set_ts_param(struct dvb_frontend* fe, int is_punctured)
{
struct cx8802_dev *dev= fe->dvb->priv;
if (is_punctured)
dev->ts_gen_cntrl |= 0x04;
else
dev->ts_gen_cntrl &= ~0x04;
return 0;
}
static struct lgdt330x_config fusionhdtv_3_gold = {
.demod_address = 0x0e,
.demod_chip = LGDT3302,
.serial_mpeg = 0x04, /* TPSERIAL for 3302 in TOP_CONTROL */
.set_ts_params = lgdt330x_set_ts_param,
};
static struct lgdt330x_config fusionhdtv_5_gold = {
.demod_address = 0x0e,
.demod_chip = LGDT3303,
.serial_mpeg = 0x40, /* TPSERIAL for 3303 in TOP_CONTROL */
.set_ts_params = lgdt330x_set_ts_param,
};
static struct lgdt330x_config pchdtv_hd5500 = {
.demod_address = 0x59,
.demod_chip = LGDT3303,
.serial_mpeg = 0x40, /* TPSERIAL for 3303 in TOP_CONTROL */
.set_ts_params = lgdt330x_set_ts_param,
};
static int nxt200x_set_ts_param(struct dvb_frontend* fe, int is_punctured)
{
struct cx8802_dev *dev= fe->dvb->priv;
dev->ts_gen_cntrl = is_punctured ? 0x04 : 0x00;
return 0;
}
static int nxt200x_set_pll_input(u8* buf, int input)
{
if (input)
buf[3] |= 0x08;
else
buf[3] &= ~0x08;
return 0;
}
static struct nxt200x_config ati_hdtvwonder = {
.demod_address = 0x0a,
.set_pll_input = nxt200x_set_pll_input,
.set_ts_params = nxt200x_set_ts_param,
};
static int cx24123_set_ts_param(struct dvb_frontend* fe,
int is_punctured)
{
struct cx8802_dev *dev= fe->dvb->priv;
dev->ts_gen_cntrl = 0x02;
return 0;
}
static int kworld_dvbs_100_set_voltage(struct dvb_frontend* fe,
fe_sec_voltage_t voltage)
{
struct cx8802_dev *dev= fe->dvb->priv;
struct cx88_core *core = dev->core;
if (voltage == SEC_VOLTAGE_OFF)
cx_write(MO_GP0_IO, 0x000006fb);
else
cx_write(MO_GP0_IO, 0x000006f9);
if (core->prev_set_voltage)
return core->prev_set_voltage(fe, voltage);
return 0;
}
static int geniatech_dvbs_set_voltage(struct dvb_frontend *fe,
fe_sec_voltage_t voltage)
{
struct cx8802_dev *dev= fe->dvb->priv;
struct cx88_core *core = dev->core;
if (voltage == SEC_VOLTAGE_OFF) {
dprintk(1,"LNB Voltage OFF\n");
cx_write(MO_GP0_IO, 0x0000efff);
}
if (core->prev_set_voltage)
return core->prev_set_voltage(fe, voltage);
return 0;
}
static struct cx24123_config geniatech_dvbs_config = {
.demod_address = 0x55,
.set_ts_params = cx24123_set_ts_param,
};
static struct cx24123_config hauppauge_novas_config = {
.demod_address = 0x55,
.set_ts_params = cx24123_set_ts_param,
};
static struct cx24123_config kworld_dvbs_100_config = {
.demod_address = 0x15,
.set_ts_params = cx24123_set_ts_param,
.lnb_polarity = 1,
};
static int dvb_register(struct cx8802_dev *dev)
{
/* init struct videobuf_dvb */
dev->dvb.name = dev->core->name;
dev->ts_gen_cntrl = 0x0c;
/* init frontend */
switch (dev->core->board) {
case CX88_BOARD_HAUPPAUGE_DVB_T1:
dev->dvb.frontend = dvb_attach(cx22702_attach,
&connexant_refboard_config,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
&dev->core->i2c_adap,
&dvb_pll_thomson_dtt759x);
}
break;
case CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1:
case CX88_BOARD_CONEXANT_DVB_T1:
case CX88_BOARD_KWORLD_DVB_T_CX22702:
case CX88_BOARD_WINFAST_DTV1000:
dev->dvb.frontend = dvb_attach(cx22702_attach,
&connexant_refboard_config,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x60,
&dev->core->i2c_adap,
&dvb_pll_thomson_dtt7579);
}
break;
case CX88_BOARD_WINFAST_DTV2000H:
case CX88_BOARD_HAUPPAUGE_HVR1100:
case CX88_BOARD_HAUPPAUGE_HVR1100LP:
dev->dvb.frontend = dvb_attach(cx22702_attach,
&hauppauge_hvr_config,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
&dev->core->i2c_adap, &dvb_pll_fmd1216me);
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS:
dev->dvb.frontend = dvb_attach(mt352_attach,
&dvico_fusionhdtv,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x60,
NULL, &dvb_pll_thomson_dtt7579);
break;
}
/* ZL10353 replaces MT352 on later cards */
dev->dvb.frontend = dvb_attach(zl10353_attach,
&dvico_fusionhdtv_plus_v1_1,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x60,
NULL, &dvb_pll_thomson_dtt7579);
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL:
/* The tin box says DEE1601, but it seems to be DTT7579
* compatible, with a slightly different MT352 AGC gain. */
dev->dvb.frontend = dvb_attach(mt352_attach,
&dvico_fusionhdtv_dual,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
NULL, &dvb_pll_thomson_dtt7579);
break;
}
/* ZL10353 replaces MT352 on later cards */
dev->dvb.frontend = dvb_attach(zl10353_attach,
&dvico_fusionhdtv_plus_v1_1,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
NULL, &dvb_pll_thomson_dtt7579);
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1:
dev->dvb.frontend = dvb_attach(mt352_attach,
&dvico_fusionhdtv,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
NULL, &dvb_pll_lg_z201);
}
break;
case CX88_BOARD_KWORLD_DVB_T:
case CX88_BOARD_DNTV_LIVE_DVB_T:
case CX88_BOARD_ADSTECH_DVB_T_PCI:
dev->dvb.frontend = dvb_attach(mt352_attach,
&dntv_live_dvbt_config,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
NULL, &dvb_pll_unknown_1);
}
break;
case CX88_BOARD_DNTV_LIVE_DVB_T_PRO:
#if defined(CONFIG_VIDEO_CX88_VP3054) || defined(CONFIG_VIDEO_CX88_VP3054_MODULE)
dev->core->pll_addr = 0x61;
dev->core->pll_desc = &dvb_pll_fmd1216me;
dev->dvb.frontend = dvb_attach(mt352_attach, &dntv_live_dvbt_pro_config,
&((struct vp3054_i2c_state *)dev->card_priv)->adap);
if (dev->dvb.frontend != NULL) {
dev->dvb.frontend->ops.tuner_ops.set_params = dntv_live_dvbt_pro_tuner_set_params;
}
#else
printk("%s: built without vp3054 support\n", dev->core->name);
#endif
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID:
dev->dvb.frontend = dvb_attach(zl10353_attach,
&dvico_fusionhdtv_hybrid,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
&dev->core->i2c_adap,
&dvb_pll_thomson_fe6600);
}
break;
case CX88_BOARD_PCHDTV_HD3000:
dev->dvb.frontend = dvb_attach(or51132_attach, &pchdtv_hd3000,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
&dev->core->i2c_adap,
&dvb_pll_thomson_dtt761x);
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q:
dev->ts_gen_cntrl = 0x08;
{
/* Do a hardware reset of chip before using it. */
struct cx88_core *core = dev->core;
cx_clear(MO_GP0_IO, 1);
mdelay(100);
cx_set(MO_GP0_IO, 1);
mdelay(200);
/* Select RF connector callback */
fusionhdtv_3_gold.pll_rf_set = lgdt330x_pll_rf_set;
dev->dvb.frontend = dvb_attach(lgdt330x_attach,
&fusionhdtv_3_gold,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
&dev->core->i2c_adap,
&dvb_pll_microtune_4042);
}
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T:
dev->ts_gen_cntrl = 0x08;
{
/* Do a hardware reset of chip before using it. */
struct cx88_core *core = dev->core;
cx_clear(MO_GP0_IO, 1);
mdelay(100);
cx_set(MO_GP0_IO, 9);
mdelay(200);
dev->dvb.frontend = dvb_attach(lgdt330x_attach,
&fusionhdtv_3_gold,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
&dev->core->i2c_adap,
&dvb_pll_thomson_dtt761x);
}
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD:
dev->ts_gen_cntrl = 0x08;
{
/* Do a hardware reset of chip before using it. */
struct cx88_core *core = dev->core;
cx_clear(MO_GP0_IO, 1);
mdelay(100);
cx_set(MO_GP0_IO, 1);
mdelay(200);
dev->dvb.frontend = dvb_attach(lgdt330x_attach,
&fusionhdtv_5_gold,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(lgh06xf_attach, dev->dvb.frontend,
&dev->core->i2c_adap);
}
}
break;
case CX88_BOARD_PCHDTV_HD5500:
dev->ts_gen_cntrl = 0x08;
{
/* Do a hardware reset of chip before using it. */
struct cx88_core *core = dev->core;
cx_clear(MO_GP0_IO, 1);
mdelay(100);
cx_set(MO_GP0_IO, 1);
mdelay(200);
dev->dvb.frontend = dvb_attach(lgdt330x_attach,
&pchdtv_hd5500,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(lgh06xf_attach, dev->dvb.frontend,
&dev->core->i2c_adap);
}
}
break;
case CX88_BOARD_ATI_HDTVWONDER:
dev->dvb.frontend = dvb_attach(nxt200x_attach,
&ati_hdtvwonder,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
NULL, &dvb_pll_tuv1236d);
}
break;
case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
case CX88_BOARD_HAUPPAUGE_NOVASE2_S1:
dev->dvb.frontend = dvb_attach(cx24123_attach,
&hauppauge_novas_config,
&dev->core->i2c_adap);
if (dev->dvb.frontend) {
dvb_attach(isl6421_attach, dev->dvb.frontend,
&dev->core->i2c_adap, 0x08, 0x00, 0x00);
}
break;
case CX88_BOARD_KWORLD_DVBS_100:
dev->dvb.frontend = dvb_attach(cx24123_attach,
&kworld_dvbs_100_config,
&dev->core->i2c_adap);
if (dev->dvb.frontend) {
dev->core->prev_set_voltage = dev->dvb.frontend->ops.set_voltage;
dev->dvb.frontend->ops.set_voltage = kworld_dvbs_100_set_voltage;
}
break;
case CX88_BOARD_GENIATECH_DVBS:
dev->dvb.frontend = dvb_attach(cx24123_attach,
&geniatech_dvbs_config,
&dev->core->i2c_adap);
if (dev->dvb.frontend) {
dev->core->prev_set_voltage = dev->dvb.frontend->ops.set_voltage;
dev->dvb.frontend->ops.set_voltage = geniatech_dvbs_set_voltage;
}
break;
case CX88_BOARD_HAUPPAUGE_HVR1300:
dev->dvb.frontend = dvb_attach(cx22702_attach,
&hauppauge_hvr_config,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
&dev->core->i2c_adap, &dvb_pll_fmd1216me);
}
break;
case CX88_BOARD_HAUPPAUGE_HVR3000:
dev->dvb.frontend = dvb_attach(cx22702_attach,
&hauppauge_hvr_config,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
&dev->core->i2c_adap, &dvb_pll_fmd1216me);
}
break;
default:
printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n",
dev->core->name);
break;
}
if (NULL == dev->dvb.frontend) {
printk("%s: frontend initialization failed\n",dev->core->name);
return -1;
}
if (dev->core->pll_desc) {
dev->dvb.frontend->ops.info.frequency_min = dev->core->pll_desc->min;
dev->dvb.frontend->ops.info.frequency_max = dev->core->pll_desc->max;
}
/* Ensure all frontends negotiate bus access */
dev->dvb.frontend->ops.ts_bus_ctrl = cx88_dvb_bus_ctrl;
/* Put the analog decoder in standby to keep it quiet */
cx88_call_i2c_clients (dev->core, TUNER_SET_STANDBY, NULL);
/* register everything */
return videobuf_dvb_register(&dev->dvb, THIS_MODULE, dev, &dev->pci->dev);
}
/* ----------------------------------------------------------- */
/* CX8802 MPEG -> mini driver - We have been given the hardware */
static int cx8802_dvb_advise_acquire(struct cx8802_driver *drv)
{
struct cx88_core *core = drv->core;
int err = 0;
dprintk( 1, "%s\n", __FUNCTION__);
switch (core->board) {
case CX88_BOARD_HAUPPAUGE_HVR1300:
/* We arrive here with either the cx23416 or the cx22702
* on the bus. Take the bus from the cx23416 and enable the
* cx22702 demod
*/
cx_set(MO_GP0_IO, 0x00000080); /* cx22702 out of reset and enable */
cx_clear(MO_GP0_IO, 0x00000004);
udelay(1000);
break;
default:
err = -ENODEV;
}
return err;
}
/* CX8802 MPEG -> mini driver - We no longer have the hardware */
static int cx8802_dvb_advise_release(struct cx8802_driver *drv)
{
struct cx88_core *core = drv->core;
int err = 0;
dprintk( 1, "%s\n", __FUNCTION__);
switch (core->board) {
case CX88_BOARD_HAUPPAUGE_HVR1300:
/* Do Nothing, leave the cx22702 on the bus. */
break;
default:
err = -ENODEV;
}
return err;
}
static int cx8802_dvb_probe(struct cx8802_driver *drv)
{
struct cx88_core *core = drv->core;
struct cx8802_dev *dev = drv->core->dvbdev;
int err;
dprintk( 1, "%s\n", __FUNCTION__);
dprintk( 1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n",
core->board,
core->name,
core->pci_bus,
core->pci_slot);
err = -ENODEV;
if (!(cx88_boards[core->board].mpeg & CX88_MPEG_DVB))
goto fail_core;
#if defined(CONFIG_VIDEO_CX88_VP3054) || defined(CONFIG_VIDEO_CX88_VP3054_MODULE)
err = vp3054_i2c_probe(dev);
if (0 != err)
goto fail_core;
#endif
/* dvb stuff */
printk("%s/2: cx2388x based dvb card\n", core->name);
videobuf_queue_init(&dev->dvb.dvbq, &dvb_qops,
dev->pci, &dev->slock,
V4L2_BUF_TYPE_VIDEO_CAPTURE,
V4L2_FIELD_TOP,
sizeof(struct cx88_buffer),
dev);
err = dvb_register(dev);
if (err != 0)
printk("%s dvb_register failed err = %d\n", __FUNCTION__, err);
fail_core:
return err;
}
static int cx8802_dvb_remove(struct cx8802_driver *drv)
{
struct cx8802_dev *dev = drv->core->dvbdev;
/* dvb */
videobuf_dvb_unregister(&dev->dvb);
#if defined(CONFIG_VIDEO_CX88_VP3054) || defined(CONFIG_VIDEO_CX88_VP3054_MODULE)
vp3054_i2c_remove(dev);
#endif
return 0;
}
static struct cx8802_driver cx8802_dvb_driver = {
.type_id = CX88_MPEG_DVB,
.hw_access = CX8802_DRVCTL_SHARED,
.probe = cx8802_dvb_probe,
.remove = cx8802_dvb_remove,
.advise_acquire = cx8802_dvb_advise_acquire,
.advise_release = cx8802_dvb_advise_release,
};
static int dvb_init(void)
{
printk(KERN_INFO "cx2388x dvb driver version %d.%d.%d loaded\n",
(CX88_VERSION_CODE >> 16) & 0xff,
(CX88_VERSION_CODE >> 8) & 0xff,
CX88_VERSION_CODE & 0xff);
#ifdef SNAPSHOT
printk(KERN_INFO "cx2388x: snapshot date %04d-%02d-%02d\n",
SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100);
#endif
return cx8802_register_driver(&cx8802_dvb_driver);
}
static void dvb_fini(void)
{
cx8802_unregister_driver(&cx8802_dvb_driver);
}
module_init(dvb_init);
module_exit(dvb_fini);
static int lgdt330x_pll_set(struct dvb_frontend* fe,
struct dvb_frontend_parameters* params)
{
/* FIXME make this routine use the tuner-simple code.
* It could probably be shared with a number of ATSC
* frontends. Many share the same tuner with analog TV. */
struct cx8802_dev *dev= fe->dvb->priv;
struct cx88_core *core = dev->core;
u8 buf[4];
struct i2c_msg msg =
{ .addr = dev->core->pll_addr, .flags = 0, .buf = buf, .len = 4 };
int err;
/* Put the analog decoder in standby to keep it quiet */
cx88_call_i2c_clients (dev->core, TUNER_SET_STANDBY, NULL);
dvb_pll_configure(core->pll_desc, buf, params->frequency, 0);
dprintk(1, "%s: tuner at 0x%02x bytes: 0x%02x 0x%02x 0x%02x 0x%02x\n",
__FUNCTION__, msg.addr, buf[0],buf[1],buf[2],buf[3]);
if ((err = i2c_transfer(&core->i2c_adap, &msg, 1)) != 1) {
printk(KERN_WARNING "cx88-dvb: %s error "
"(addr %02x <- %02x, err = %i)\n",
__FUNCTION__, buf[0], buf[1], err);
if (err < 0)
return err;
else
return -EREMOTEIO;
}
if (core->tuner_type == TUNER_LG_TDVS_H062F) {
/* Set the Auxiliary Byte. */
buf[2] &= ~0x20;
buf[2] |= 0x18;
buf[3] = 0x50;
i2c_transfer(&core->i2c_adap, &msg, 1);
}
return 0;
}
static int lgdt330x_pll_rf_set(struct dvb_frontend* fe, int index)
{
struct cx8802_dev *dev= fe->dvb->priv;
struct cx88_core *core = dev->core;
dprintk(1, "%s: index = %d\n", __FUNCTION__, index);
if (index == 0)
cx_clear(MO_GP0_IO, 8);
else
cx_set(MO_GP0_IO, 8);
return 0;
}
static int lgdt330x_set_ts_param(struct dvb_frontend* fe, int is_punctured)
{
struct cx8802_dev *dev= fe->dvb->priv;
if (is_punctured)
dev->ts_gen_cntrl |= 0x04;
else
dev->ts_gen_cntrl &= ~0x04;
return 0;
}
static struct lgdt330x_config fusionhdtv_3_gold = {
.demod_address = 0x0e,
.demod_chip = LGDT3302,
.serial_mpeg = 0x04, /* TPSERIAL for 3302 in TOP_CONTROL */
.pll_set = lgdt330x_pll_set,
.set_ts_params = lgdt330x_set_ts_param,
};
static struct lgdt330x_config fusionhdtv_5_gold = {
.demod_address = 0x0e,
.demod_chip = LGDT3303,
.serial_mpeg = 0x40, /* TPSERIAL for 3303 in TOP_CONTROL */
.pll_set = lgdt330x_pll_set,
.set_ts_params = lgdt330x_set_ts_param,
};
#endif
static int dvb_register(struct cx8802_dev *dev)
{
/* init struct videobuf_dvb */
dev->dvb.name = dev->core->name;
dev->ts_gen_cntrl = 0x0c;
/* init frontend */
switch (dev->core->board) {
#ifdef HAVE_CX22702
case CX88_BOARD_HAUPPAUGE_DVB_T1:
dev->dvb.frontend = cx22702_attach(&hauppauge_novat_config,
&dev->core->i2c_adap);
break;
case CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1:
case CX88_BOARD_CONEXANT_DVB_T1:
dev->dvb.frontend = cx22702_attach(&connexant_refboard_config,
&dev->core->i2c_adap);
break;
#endif
#ifdef HAVE_MT352
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1:
dev->core->pll_addr = 0x61;
dev->core->pll_desc = &dvb_pll_lg_z201;
dev->dvb.frontend = mt352_attach(&dvico_fusionhdtv,
&dev->core->i2c_adap);
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS:
dev->core->pll_addr = 0x60;
dev->core->pll_desc = &dvb_pll_thomson_dtt7579;
dev->dvb.frontend = mt352_attach(&dvico_fusionhdtv,
&dev->core->i2c_adap);
break;
case CX88_BOARD_KWORLD_DVB_T:
case CX88_BOARD_DNTV_LIVE_DVB_T:
case CX88_BOARD_ADSTECH_DVB_T_PCI:
dev->core->pll_addr = 0x61;
dev->core->pll_desc = &dvb_pll_unknown_1;
dev->dvb.frontend = mt352_attach(&dntv_live_dvbt_config,
&dev->core->i2c_adap);
break;
#endif
#ifdef HAVE_OR51132
case CX88_BOARD_PCHDTV_HD3000:
dev->dvb.frontend = or51132_attach(&pchdtv_hd3000,
&dev->core->i2c_adap);
break;
#endif
#ifdef HAVE_LGDT330X
case CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q:
dev->ts_gen_cntrl = 0x08;
{
/* Do a hardware reset of chip before using it. */
struct cx88_core *core = dev->core;
cx_clear(MO_GP0_IO, 1);
mdelay(100);
cx_set(MO_GP0_IO, 1);
mdelay(200);
/* Select RF connector callback */
fusionhdtv_3_gold.pll_rf_set = lgdt330x_pll_rf_set;
dev->core->pll_addr = 0x61;
dev->core->pll_desc = &dvb_pll_microtune_4042;
dev->dvb.frontend = lgdt330x_attach(&fusionhdtv_3_gold,
&dev->core->i2c_adap);
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T:
dev->ts_gen_cntrl = 0x08;
{
/* Do a hardware reset of chip before using it. */
struct cx88_core *core = dev->core;
cx_clear(MO_GP0_IO, 1);
mdelay(100);
cx_set(MO_GP0_IO, 9);
mdelay(200);
dev->core->pll_addr = 0x61;
dev->core->pll_desc = &dvb_pll_thomson_dtt7611;
dev->dvb.frontend = lgdt330x_attach(&fusionhdtv_3_gold,
&dev->core->i2c_adap);
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD:
dev->ts_gen_cntrl = 0x08;
{
/* Do a hardware reset of chip before using it. */
struct cx88_core *core = dev->core;
cx_clear(MO_GP0_IO, 1);
mdelay(100);
cx_set(MO_GP0_IO, 1);
mdelay(200);
dev->core->pll_addr = 0x61;
dev->core->pll_desc = &dvb_pll_tdvs_tua6034;
dev->dvb.frontend = lgdt330x_attach(&fusionhdtv_5_gold,
&dev->core->i2c_adap);
}
break;
#endif
default:
printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n",
dev->core->name);
break;
}
if (NULL == dev->dvb.frontend) {
printk("%s: frontend initialization failed\n",dev->core->name);
return -1;
}
if (dev->core->pll_desc) {
dev->dvb.frontend->ops->info.frequency_min = dev->core->pll_desc->min;
dev->dvb.frontend->ops->info.frequency_max = dev->core->pll_desc->max;
}
/* Put the analog decoder in standby to keep it quiet */
cx88_call_i2c_clients (dev->core, TUNER_SET_STANDBY, NULL);
/* register everything */
return videobuf_dvb_register(&dev->dvb, THIS_MODULE, dev);
}
/* ----------------------------------------------------------- */
static int __devinit dvb_probe(struct pci_dev *pci_dev,
const struct pci_device_id *pci_id)
{
struct cx8802_dev *dev;
struct cx88_core *core;
int err;
/* general setup */
core = cx88_core_get(pci_dev);
if (NULL == core)
return -EINVAL;
err = -ENODEV;
if (!cx88_boards[core->board].dvb)
goto fail_core;
err = -ENOMEM;
dev = kmalloc(sizeof(*dev),GFP_KERNEL);
if (NULL == dev)
goto fail_core;
memset(dev,0,sizeof(*dev));
dev->pci = pci_dev;
dev->core = core;
err = cx8802_init_common(dev);
if (0 != err)
goto fail_free;
/* dvb stuff */
printk("%s/2: cx2388x based dvb card\n", core->name);
videobuf_queue_init(&dev->dvb.dvbq, &dvb_qops,
dev->pci, &dev->slock,
V4L2_BUF_TYPE_VIDEO_CAPTURE,
V4L2_FIELD_TOP,
sizeof(struct cx88_buffer),
dev);
err = dvb_register(dev);
if (0 != err)
goto fail_fini;
return 0;
fail_fini:
cx8802_fini_common(dev);
fail_free:
kfree(dev);
fail_core:
cx88_core_put(core,pci_dev);
return err;
}
static void __devexit dvb_remove(struct pci_dev *pci_dev)
{
struct cx8802_dev *dev = pci_get_drvdata(pci_dev);
/* dvb */
videobuf_dvb_unregister(&dev->dvb);
/* common */
cx8802_fini_common(dev);
cx88_core_put(dev->core,dev->pci);
kfree(dev);
}
static struct pci_device_id cx8802_pci_tbl[] = {
{
.vendor = 0x14f1,
.device = 0x8802,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},{
/* --- end of list --- */
}
};
static int philips_fmd1216_pll_init(struct dvb_frontend *fe)
{
struct cx8802_dev *dev= fe->dvb->priv;
/* this message is to set up ATC and ALC */
static u8 fmd1216_init[] = { 0x0b, 0xdc, 0x9c, 0xa0 };
struct i2c_msg msg =
{ .addr = dev->core->pll_addr, .flags = 0,
.buf = fmd1216_init, .len = sizeof(fmd1216_init) };
int err;
if ((err = i2c_transfer(&dev->core->i2c_adap, &msg, 1)) != 1) {
if (err < 0)
return err;
else
return -EREMOTEIO;
}
return 0;
}
static int dntv_live_dvbt_pro_pll_set(struct dvb_frontend* fe,
struct dvb_frontend_parameters* params,
u8* pllbuf)
{
struct cx8802_dev *dev= fe->dvb->priv;
struct i2c_msg msg =
{ .addr = dev->core->pll_addr, .flags = 0,
.buf = pllbuf+1, .len = 4 };
int err;
/* Switch PLL to DVB mode */
err = philips_fmd1216_pll_init(fe);
if (err)
return err;
/* Tune PLL */
pllbuf[0] = dev->core->pll_addr << 1;
dvb_pll_configure(dev->core->pll_desc, pllbuf+1,
params->frequency,
params->u.ofdm.bandwidth);
if ((err = i2c_transfer(&dev->core->i2c_adap, &msg, 1)) != 1) {
printk(KERN_WARNING "cx88-dvb: %s error "
"(addr %02x <- %02x, err = %i)\n",
__FUNCTION__, pllbuf[0], pllbuf[1], err);
if (err < 0)
return err;
else
return -EREMOTEIO;
}
return 0;
}
static struct mt352_config dntv_live_dvbt_pro_config = {
.demod_address = 0x0f,
.no_tuner = 1,
.demod_init = dntv_live_dvbt_pro_demod_init,
.pll_set = dntv_live_dvbt_pro_pll_set,
};
#endif
#endif
#ifdef HAVE_CX22702
static struct cx22702_config connexant_refboard_config = {
.demod_address = 0x43,
.output_mode = CX22702_SERIAL_OUTPUT,
.pll_address = 0x60,
.pll_desc = &dvb_pll_thomson_dtt7579,
};
static struct cx22702_config hauppauge_novat_config = {
.demod_address = 0x43,
.output_mode = CX22702_SERIAL_OUTPUT,
.pll_address = 0x61,
.pll_desc = &dvb_pll_thomson_dtt759x,
};
static struct cx22702_config hauppauge_hvr1100_config = {
.demod_address = 0x63,
.output_mode = CX22702_SERIAL_OUTPUT,
.pll_address = 0x61,
.pll_desc = &dvb_pll_fmd1216me,
};
#endif
#ifdef HAVE_OR51132
static int or51132_set_ts_param(struct dvb_frontend* fe,
int is_punctured)
{
struct cx8802_dev *dev= fe->dvb->priv;
dev->ts_gen_cntrl = is_punctured ? 0x04 : 0x00;
return 0;
}
static struct or51132_config pchdtv_hd3000 = {
.demod_address = 0x15,
.pll_address = 0x61,
.pll_desc = &dvb_pll_thomson_dtt7610,
.set_ts_params = or51132_set_ts_param,
};
#endif
#ifdef HAVE_LGDT330X
static int lgdt330x_pll_set(struct dvb_frontend* fe,
struct dvb_frontend_parameters* params)
{
/* FIXME make this routine use the tuner-simple code.
* It could probably be shared with a number of ATSC
* frontends. Many share the same tuner with analog TV. */
struct cx8802_dev *dev= fe->dvb->priv;
struct cx88_core *core = dev->core;
u8 buf[4];
struct i2c_msg msg =
{ .addr = dev->core->pll_addr, .flags = 0, .buf = buf, .len = 4 };
int err;
/* Put the analog decoder in standby to keep it quiet */
cx88_call_i2c_clients (dev->core, TUNER_SET_STANDBY, NULL);
dvb_pll_configure(core->pll_desc, buf, params->frequency, 0);
dprintk(1, "%s: tuner at 0x%02x bytes: 0x%02x 0x%02x 0x%02x 0x%02x\n",
__FUNCTION__, msg.addr, buf[0],buf[1],buf[2],buf[3]);
if ((err = i2c_transfer(&core->i2c_adap, &msg, 1)) != 1) {
printk(KERN_WARNING "cx88-dvb: %s error "
"(addr %02x <- %02x, err = %i)\n",
__FUNCTION__, buf[0], buf[1], err);
if (err < 0)
return err;
else
return -EREMOTEIO;
}
if (core->tuner_type == TUNER_LG_TDVS_H062F) {
/* Set the Auxiliary Byte. */
buf[2] &= ~0x20;
buf[2] |= 0x18;
buf[3] = 0x50;
i2c_transfer(&core->i2c_adap, &msg, 1);
}
return 0;
}
static int lgdt330x_pll_rf_set(struct dvb_frontend* fe, int index)
{
struct cx8802_dev *dev= fe->dvb->priv;
struct cx88_core *core = dev->core;
dprintk(1, "%s: index = %d\n", __FUNCTION__, index);
if (index == 0)
cx_clear(MO_GP0_IO, 8);
else
cx_set(MO_GP0_IO, 8);
return 0;
}
static int lgdt330x_set_ts_param(struct dvb_frontend* fe, int is_punctured)
{
struct cx8802_dev *dev= fe->dvb->priv;
if (is_punctured)
dev->ts_gen_cntrl |= 0x04;
else
dev->ts_gen_cntrl &= ~0x04;
return 0;
}
static struct lgdt330x_config fusionhdtv_3_gold = {
.demod_address = 0x0e,
.demod_chip = LGDT3302,
.serial_mpeg = 0x04, /* TPSERIAL for 3302 in TOP_CONTROL */
.pll_set = lgdt330x_pll_set,
.set_ts_params = lgdt330x_set_ts_param,
};
static struct lgdt330x_config fusionhdtv_5_gold = {
.demod_address = 0x0e,
.demod_chip = LGDT3303,
.serial_mpeg = 0x40, /* TPSERIAL for 3303 in TOP_CONTROL */
.pll_set = lgdt330x_pll_set,
.set_ts_params = lgdt330x_set_ts_param,
};
#endif
#ifdef HAVE_NXT200X
static int nxt200x_set_ts_param(struct dvb_frontend* fe,
int is_punctured)
{
struct cx8802_dev *dev= fe->dvb->priv;
dev->ts_gen_cntrl = is_punctured ? 0x04 : 0x00;
return 0;
}
static int nxt200x_set_pll_input(u8* buf, int input)
{
if (input)
buf[3] |= 0x08;
else
buf[3] &= ~0x08;
return 0;
}
static struct nxt200x_config ati_hdtvwonder = {
.demod_address = 0x0a,
.pll_address = 0x61,
.pll_desc = &dvb_pll_tuv1236d,
.set_pll_input = nxt200x_set_pll_input,
.set_ts_params = nxt200x_set_ts_param,
};
#endif
#ifdef HAVE_CX24123
static int cx24123_set_ts_param(struct dvb_frontend* fe,
int is_punctured)
{
struct cx8802_dev *dev= fe->dvb->priv;
dev->ts_gen_cntrl = 0x2;
return 0;
}
static void cx24123_enable_lnb_voltage(struct dvb_frontend* fe, int on)
{
struct cx8802_dev *dev= fe->dvb->priv;
struct cx88_core *core = dev->core;
if (on)
cx_write(MO_GP0_IO, 0x000006f9);
else
cx_write(MO_GP0_IO, 0x000006fB);
}
static struct cx24123_config hauppauge_novas_config = {
.demod_address = 0x55,
.use_isl6421 = 1,
.set_ts_params = cx24123_set_ts_param,
};
static struct cx24123_config kworld_dvbs_100_config = {
.demod_address = 0x15,
.use_isl6421 = 0,
.set_ts_params = cx24123_set_ts_param,
.enable_lnb_voltage = cx24123_enable_lnb_voltage,
};
#endif
static int dvb_register(struct cx8802_dev *dev)
{
/* init struct videobuf_dvb */
dev->dvb.name = dev->core->name;
dev->ts_gen_cntrl = 0x0c;
/* init frontend */
switch (dev->core->board) {
#ifdef HAVE_CX22702
case CX88_BOARD_HAUPPAUGE_DVB_T1:
dev->dvb.frontend = cx22702_attach(&hauppauge_novat_config,
&dev->core->i2c_adap);
break;
case CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1:
case CX88_BOARD_CONEXANT_DVB_T1:
case CX88_BOARD_KWORLD_DVB_T_CX22702:
case CX88_BOARD_WINFAST_DTV1000:
dev->dvb.frontend = cx22702_attach(&connexant_refboard_config,
&dev->core->i2c_adap);
break;
case CX88_BOARD_HAUPPAUGE_HVR1100:
case CX88_BOARD_HAUPPAUGE_HVR1100LP:
dev->dvb.frontend = cx22702_attach(&hauppauge_hvr1100_config,
&dev->core->i2c_adap);
break;
#endif
#ifdef HAVE_MT352
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1:
dev->core->pll_addr = 0x61;
dev->core->pll_desc = &dvb_pll_lg_z201;
dev->dvb.frontend = mt352_attach(&dvico_fusionhdtv,
&dev->core->i2c_adap);
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS:
dev->core->pll_addr = 0x60;
dev->core->pll_desc = &dvb_pll_thomson_dtt7579;
dev->dvb.frontend = mt352_attach(&dvico_fusionhdtv,
&dev->core->i2c_adap);
break;
case CX88_BOARD_KWORLD_DVB_T:
case CX88_BOARD_DNTV_LIVE_DVB_T:
case CX88_BOARD_ADSTECH_DVB_T_PCI:
dev->core->pll_addr = 0x61;
dev->core->pll_desc = &dvb_pll_unknown_1;
dev->dvb.frontend = mt352_attach(&dntv_live_dvbt_config,
&dev->core->i2c_adap);
break;
case CX88_BOARD_DNTV_LIVE_DVB_T_PRO:
#ifdef HAVE_VP3054_I2C
dev->core->pll_addr = 0x61;
dev->core->pll_desc = &dvb_pll_fmd1216me;
dev->dvb.frontend = mt352_attach(&dntv_live_dvbt_pro_config,
&((struct vp3054_i2c_state *)dev->card_priv)->adap);
#else
printk("%s: built without vp3054 support\n", dev->core->name);
#endif
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL:
/* The tin box says DEE1601, but it seems to be DTT7579
* compatible, with a slightly different MT352 AGC gain. */
dev->core->pll_addr = 0x61;
dev->core->pll_desc = &dvb_pll_thomson_dtt7579;
dev->dvb.frontend = mt352_attach(&dvico_fusionhdtv_dual,
&dev->core->i2c_adap);
break;
#endif
#ifdef HAVE_OR51132
case CX88_BOARD_PCHDTV_HD3000:
dev->dvb.frontend = or51132_attach(&pchdtv_hd3000,
&dev->core->i2c_adap);
break;
#endif
#ifdef HAVE_LGDT330X
case CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q:
dev->ts_gen_cntrl = 0x08;
{
/* Do a hardware reset of chip before using it. */
struct cx88_core *core = dev->core;
cx_clear(MO_GP0_IO, 1);
mdelay(100);
cx_set(MO_GP0_IO, 1);
mdelay(200);
/* Select RF connector callback */
fusionhdtv_3_gold.pll_rf_set = lgdt330x_pll_rf_set;
dev->core->pll_addr = 0x61;
dev->core->pll_desc = &dvb_pll_microtune_4042;
dev->dvb.frontend = lgdt330x_attach(&fusionhdtv_3_gold,
&dev->core->i2c_adap);
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T:
dev->ts_gen_cntrl = 0x08;
{
/* Do a hardware reset of chip before using it. */
struct cx88_core *core = dev->core;
cx_clear(MO_GP0_IO, 1);
mdelay(100);
cx_set(MO_GP0_IO, 9);
mdelay(200);
dev->core->pll_addr = 0x61;
dev->core->pll_desc = &dvb_pll_thomson_dtt761x;
dev->dvb.frontend = lgdt330x_attach(&fusionhdtv_3_gold,
&dev->core->i2c_adap);
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD:
dev->ts_gen_cntrl = 0x08;
{
/* Do a hardware reset of chip before using it. */
struct cx88_core *core = dev->core;
cx_clear(MO_GP0_IO, 1);
mdelay(100);
cx_set(MO_GP0_IO, 1);
mdelay(200);
dev->core->pll_addr = 0x61;
dev->core->pll_desc = &dvb_pll_tdvs_tua6034;
dev->dvb.frontend = lgdt330x_attach(&fusionhdtv_5_gold,
&dev->core->i2c_adap);
}
break;
#endif
#ifdef HAVE_NXT200X
case CX88_BOARD_ATI_HDTVWONDER:
dev->dvb.frontend = nxt200x_attach(&ati_hdtvwonder,
&dev->core->i2c_adap);
break;
#endif
#ifdef HAVE_CX24123
case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
case CX88_BOARD_HAUPPAUGE_NOVASE2_S1:
dev->dvb.frontend = cx24123_attach(&hauppauge_novas_config,
&dev->core->i2c_adap);
break;
case CX88_BOARD_KWORLD_DVBS_100:
dev->dvb.frontend = cx24123_attach(&kworld_dvbs_100_config,
&dev->core->i2c_adap);
break;
#endif
default:
printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n",
dev->core->name);
break;
}
if (NULL == dev->dvb.frontend) {
printk("%s: frontend initialization failed\n",dev->core->name);
return -1;
}
if (dev->core->pll_desc) {
dev->dvb.frontend->ops->info.frequency_min = dev->core->pll_desc->min;
dev->dvb.frontend->ops->info.frequency_max = dev->core->pll_desc->max;
}
/* Put the analog decoder in standby to keep it quiet */
cx88_call_i2c_clients (dev->core, TUNER_SET_STANDBY, NULL);
/* register everything */
return videobuf_dvb_register(&dev->dvb, THIS_MODULE, dev);
}
/* ----------------------------------------------------------- */
static int __devinit dvb_probe(struct pci_dev *pci_dev,
const struct pci_device_id *pci_id)
{
struct cx8802_dev *dev;
struct cx88_core *core;
int err;
/* general setup */
core = cx88_core_get(pci_dev);
if (NULL == core)
return -EINVAL;
err = -ENODEV;
if (!cx88_boards[core->board].dvb)
goto fail_core;
err = -ENOMEM;
dev = kzalloc(sizeof(*dev),GFP_KERNEL);
if (NULL == dev)
goto fail_core;
dev->pci = pci_dev;
dev->core = core;
err = cx8802_init_common(dev);
if (0 != err)
goto fail_free;
#ifdef HAVE_VP3054_I2C
err = vp3054_i2c_probe(dev);
if (0 != err)
goto fail_free;
#endif
/* dvb stuff */
printk("%s/2: cx2388x based dvb card\n", core->name);
videobuf_queue_init(&dev->dvb.dvbq, &dvb_qops,
dev->pci, &dev->slock,
V4L2_BUF_TYPE_VIDEO_CAPTURE,
V4L2_FIELD_TOP,
sizeof(struct cx88_buffer),
dev);
err = dvb_register(dev);
if (0 != err)
goto fail_fini;
/* Maintain a reference to cx88-video can query the 8802 device. */
core->dvbdev = dev;
return 0;
fail_fini:
cx8802_fini_common(dev);
fail_free:
kfree(dev);
fail_core:
cx88_core_put(core,pci_dev);
return err;
}
static void __devexit dvb_remove(struct pci_dev *pci_dev)
{
struct cx8802_dev *dev = pci_get_drvdata(pci_dev);
/* Destroy any 8802 reference. */
dev->core->dvbdev = NULL;
/* dvb */
videobuf_dvb_unregister(&dev->dvb);
#ifdef HAVE_VP3054_I2C
vp3054_i2c_remove(dev);
#endif
/* common */
cx8802_fini_common(dev);
cx88_core_put(dev->core,dev->pci);
kfree(dev);
}
static struct pci_device_id cx8802_pci_tbl[] = {
{
.vendor = 0x14f1,
.device = 0x8802,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},{
/* --- end of list --- */
}
};
MODULE_DEVICE_TABLE(pci, cx8802_pci_tbl);
static struct pci_driver dvb_pci_driver = {
.name = "cx88-dvb",
.id_table = cx8802_pci_tbl,
.probe = dvb_probe,
.remove = __devexit_p(dvb_remove),
.suspend = cx8802_suspend_common,
.resume = cx8802_resume_common,
};
static int dvb_init(void)
{
printk(KERN_INFO "cx2388x dvb driver version %d.%d.%d loaded\n",
(CX88_VERSION_CODE >> 16) & 0xff,
(CX88_VERSION_CODE >> 8) & 0xff,
CX88_VERSION_CODE & 0xff);
#ifdef SNAPSHOT
printk(KERN_INFO "cx2388x: snapshot date %04d-%02d-%02d\n",
SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100);
#endif
return pci_register_driver(&dvb_pci_driver);
}
static void dvb_fini(void)
{
pci_unregister_driver(&dvb_pci_driver);
}
module_init(dvb_init);
module_exit(dvb_fini);
static int attach_xc3028(u8 addr, struct cx8802_dev *dev)
{
struct dvb_frontend *fe;
struct xc2028_ctrl ctl;
struct xc2028_config cfg = {
.i2c_adap = &dev->core->i2c_adap,
.i2c_addr = addr,
.ctrl = &ctl,
.callback = cx88_tuner_callback,
};
if (!dev->dvb.frontend) {
printk(KERN_ERR "%s/2: dvb frontend not attached. "
"Can't attach xc3028\n",
dev->core->name);
return -EINVAL;
}
/*
* Some xc3028 devices may be hidden by an I2C gate. This is known
* to happen with some s5h1409-based devices.
* Now that I2C gate is open, sets up xc3028 configuration
*/
cx88_setup_xc3028(dev->core, &ctl);
fe = dvb_attach(xc2028_attach, dev->dvb.frontend, &cfg);
if (!fe) {
printk(KERN_ERR "%s/2: xc3028 attach failed\n",
dev->core->name);
return -EINVAL;
}
printk(KERN_INFO "%s/2: xc3028 attached\n",
dev->core->name);
return 0;
}
static int dvb_register(struct cx8802_dev *dev)
{
struct cx88_core *core = dev->core;
/* init struct videobuf_dvb */
dev->dvb.name = core->name;
dev->ts_gen_cntrl = 0x0c;
/* init frontend */
switch (core->boardnr) {
case CX88_BOARD_HAUPPAUGE_DVB_T1:
dev->dvb.frontend = dvb_attach(cx22702_attach,
&connexant_refboard_config,
&core->i2c_adap);
if (dev->dvb.frontend != NULL) {
if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend,
0x61, &core->i2c_adap,
DVB_PLL_THOMSON_DTT759X))
goto frontend_detach;
}
break;
case CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1:
case CX88_BOARD_CONEXANT_DVB_T1:
case CX88_BOARD_KWORLD_DVB_T_CX22702:
case CX88_BOARD_WINFAST_DTV1000:
dev->dvb.frontend = dvb_attach(cx22702_attach,
&connexant_refboard_config,
&core->i2c_adap);
if (dev->dvb.frontend != NULL) {
if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend,
0x60, &core->i2c_adap,
DVB_PLL_THOMSON_DTT7579))
goto frontend_detach;
}
break;
case CX88_BOARD_WINFAST_DTV2000H:
case CX88_BOARD_HAUPPAUGE_HVR1100:
case CX88_BOARD_HAUPPAUGE_HVR1100LP:
case CX88_BOARD_HAUPPAUGE_HVR1300:
case CX88_BOARD_HAUPPAUGE_HVR3000:
dev->dvb.frontend = dvb_attach(cx22702_attach,
&hauppauge_hvr_config,
&core->i2c_adap);
if (dev->dvb.frontend != NULL) {
if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend,
&core->i2c_adap, 0x61,
TUNER_PHILIPS_FMD1216ME_MK3))
goto frontend_detach;
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS:
dev->dvb.frontend = dvb_attach(mt352_attach,
&dvico_fusionhdtv,
&core->i2c_adap);
if (dev->dvb.frontend != NULL) {
if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend,
0x60, NULL, DVB_PLL_THOMSON_DTT7579))
goto frontend_detach;
break;
}
/* ZL10353 replaces MT352 on later cards */
dev->dvb.frontend = dvb_attach(zl10353_attach,
&dvico_fusionhdtv_plus_v1_1,
&core->i2c_adap);
if (dev->dvb.frontend != NULL) {
if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend,
0x60, NULL, DVB_PLL_THOMSON_DTT7579))
goto frontend_detach;
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL:
/* The tin box says DEE1601, but it seems to be DTT7579
* compatible, with a slightly different MT352 AGC gain. */
dev->dvb.frontend = dvb_attach(mt352_attach,
&dvico_fusionhdtv_dual,
&core->i2c_adap);
if (dev->dvb.frontend != NULL) {
if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend,
0x61, NULL, DVB_PLL_THOMSON_DTT7579))
goto frontend_detach;
break;
}
/* ZL10353 replaces MT352 on later cards */
dev->dvb.frontend = dvb_attach(zl10353_attach,
&dvico_fusionhdtv_plus_v1_1,
&core->i2c_adap);
if (dev->dvb.frontend != NULL) {
if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend,
0x61, NULL, DVB_PLL_THOMSON_DTT7579))
goto frontend_detach;
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1:
dev->dvb.frontend = dvb_attach(mt352_attach,
&dvico_fusionhdtv,
&core->i2c_adap);
if (dev->dvb.frontend != NULL) {
if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend,
0x61, NULL, DVB_PLL_LG_Z201))
goto frontend_detach;
}
break;
case CX88_BOARD_KWORLD_DVB_T:
case CX88_BOARD_DNTV_LIVE_DVB_T:
case CX88_BOARD_ADSTECH_DVB_T_PCI:
dev->dvb.frontend = dvb_attach(mt352_attach,
&dntv_live_dvbt_config,
&core->i2c_adap);
if (dev->dvb.frontend != NULL) {
if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend,
0x61, NULL, DVB_PLL_UNKNOWN_1))
goto frontend_detach;
}
break;
case CX88_BOARD_DNTV_LIVE_DVB_T_PRO:
#if defined(CONFIG_VIDEO_CX88_VP3054) || (defined(CONFIG_VIDEO_CX88_VP3054_MODULE) && defined(MODULE))
/* MT352 is on a secondary I2C bus made from some GPIO lines */
dev->dvb.frontend = dvb_attach(mt352_attach, &dntv_live_dvbt_pro_config,
&dev->vp3054->adap);
if (dev->dvb.frontend != NULL) {
if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend,
&core->i2c_adap, 0x61,
TUNER_PHILIPS_FMD1216ME_MK3))
goto frontend_detach;
}
#else
printk(KERN_ERR "%s/2: built without vp3054 support\n",
core->name);
#endif
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID:
dev->dvb.frontend = dvb_attach(zl10353_attach,
&dvico_fusionhdtv_hybrid,
&core->i2c_adap);
if (dev->dvb.frontend != NULL) {
if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend,
&core->i2c_adap, 0x61,
TUNER_THOMSON_FE6600))
goto frontend_detach;
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO:
dev->dvb.frontend = dvb_attach(zl10353_attach,
&dvico_fusionhdtv_xc3028,
&core->i2c_adap);
if (dev->dvb.frontend == NULL)
dev->dvb.frontend = dvb_attach(mt352_attach,
&dvico_fusionhdtv_mt352_xc3028,
&core->i2c_adap);
/*
* On this board, the demod provides the I2C bus pullup.
* We must not permit gate_ctrl to be performed, or
* the xc3028 cannot communicate on the bus.
*/
if (dev->dvb.frontend)
dev->dvb.frontend->ops.i2c_gate_ctrl = NULL;
if (attach_xc3028(0x61, dev) < 0)
return -EINVAL;
break;
case CX88_BOARD_PCHDTV_HD3000:
dev->dvb.frontend = dvb_attach(or51132_attach, &pchdtv_hd3000,
&core->i2c_adap);
if (dev->dvb.frontend != NULL) {
if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend,
&core->i2c_adap, 0x61,
TUNER_THOMSON_DTT761X))
goto frontend_detach;
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q:
dev->ts_gen_cntrl = 0x08;
/* Do a hardware reset of chip before using it. */
cx_clear(MO_GP0_IO, 1);
mdelay(100);
cx_set(MO_GP0_IO, 1);
mdelay(200);
/* Select RF connector callback */
fusionhdtv_3_gold.pll_rf_set = lgdt330x_pll_rf_set;
dev->dvb.frontend = dvb_attach(lgdt330x_attach,
&fusionhdtv_3_gold,
&core->i2c_adap);
if (dev->dvb.frontend != NULL) {
if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend,
&core->i2c_adap, 0x61,
TUNER_MICROTUNE_4042FI5))
goto frontend_detach;
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T:
dev->ts_gen_cntrl = 0x08;
/* Do a hardware reset of chip before using it. */
cx_clear(MO_GP0_IO, 1);
mdelay(100);
cx_set(MO_GP0_IO, 9);
mdelay(200);
dev->dvb.frontend = dvb_attach(lgdt330x_attach,
&fusionhdtv_3_gold,
&core->i2c_adap);
if (dev->dvb.frontend != NULL) {
if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend,
&core->i2c_adap, 0x61,
TUNER_THOMSON_DTT761X))
goto frontend_detach;
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD:
dev->ts_gen_cntrl = 0x08;
/* Do a hardware reset of chip before using it. */
cx_clear(MO_GP0_IO, 1);
mdelay(100);
cx_set(MO_GP0_IO, 1);
mdelay(200);
dev->dvb.frontend = dvb_attach(lgdt330x_attach,
&fusionhdtv_5_gold,
&core->i2c_adap);
if (dev->dvb.frontend != NULL) {
if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend,
&core->i2c_adap, 0x61,
TUNER_LG_TDVS_H06XF))
goto frontend_detach;
if (!dvb_attach(tda9887_attach, dev->dvb.frontend,
&core->i2c_adap, 0x43))
goto frontend_detach;
}
break;
case CX88_BOARD_PCHDTV_HD5500:
dev->ts_gen_cntrl = 0x08;
/* Do a hardware reset of chip before using it. */
cx_clear(MO_GP0_IO, 1);
mdelay(100);
cx_set(MO_GP0_IO, 1);
mdelay(200);
dev->dvb.frontend = dvb_attach(lgdt330x_attach,
&pchdtv_hd5500,
&core->i2c_adap);
if (dev->dvb.frontend != NULL) {
if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend,
&core->i2c_adap, 0x61,
TUNER_LG_TDVS_H06XF))
goto frontend_detach;
if (!dvb_attach(tda9887_attach, dev->dvb.frontend,
&core->i2c_adap, 0x43))
goto frontend_detach;
}
break;
case CX88_BOARD_ATI_HDTVWONDER:
dev->dvb.frontend = dvb_attach(nxt200x_attach,
&ati_hdtvwonder,
&core->i2c_adap);
if (dev->dvb.frontend != NULL) {
if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend,
&core->i2c_adap, 0x61,
TUNER_PHILIPS_TUV1236D))
goto frontend_detach;
}
break;
case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
case CX88_BOARD_HAUPPAUGE_NOVASE2_S1:
dev->dvb.frontend = dvb_attach(cx24123_attach,
&hauppauge_novas_config,
&core->i2c_adap);
if (dev->dvb.frontend) {
if (!dvb_attach(isl6421_attach, dev->dvb.frontend,
&core->i2c_adap, 0x08, 0x00, 0x00))
goto frontend_detach;
}
break;
case CX88_BOARD_KWORLD_DVBS_100:
dev->dvb.frontend = dvb_attach(cx24123_attach,
&kworld_dvbs_100_config,
&core->i2c_adap);
if (dev->dvb.frontend) {
core->prev_set_voltage = dev->dvb.frontend->ops.set_voltage;
dev->dvb.frontend->ops.set_voltage = kworld_dvbs_100_set_voltage;
}
break;
case CX88_BOARD_GENIATECH_DVBS:
dev->dvb.frontend = dvb_attach(cx24123_attach,
&geniatech_dvbs_config,
&core->i2c_adap);
if (dev->dvb.frontend) {
core->prev_set_voltage = dev->dvb.frontend->ops.set_voltage;
dev->dvb.frontend->ops.set_voltage = geniatech_dvbs_set_voltage;
}
break;
case CX88_BOARD_PINNACLE_PCTV_HD_800i:
dev->dvb.frontend = dvb_attach(s5h1409_attach,
&pinnacle_pctv_hd_800i_config,
&core->i2c_adap);
if (dev->dvb.frontend != NULL) {
/* tuner_config.video_dev must point to
* i2c_adap.algo_data
*/
if (!dvb_attach(xc5000_attach, dev->dvb.frontend,
&core->i2c_adap,
&pinnacle_pctv_hd_800i_tuner_config,
core->i2c_adap.algo_data))
goto frontend_detach;
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
dev->dvb.frontend = dvb_attach(s5h1409_attach,
&dvico_hdtv5_pci_nano_config,
&core->i2c_adap);
if (dev->dvb.frontend != NULL) {
struct dvb_frontend *fe;
struct xc2028_config cfg = {
.i2c_adap = &core->i2c_adap,
.i2c_addr = 0x61,
.callback = cx88_pci_nano_callback,
};
static struct xc2028_ctrl ctl = {
.fname = "xc3028-v27.fw",
.max_len = 64,
.scode_table = XC3028_FE_OREN538,
};
fe = dvb_attach(xc2028_attach,
dev->dvb.frontend, &cfg);
if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
fe->ops.tuner_ops.set_config(fe, &ctl);
}
break;
case CX88_BOARD_PINNACLE_HYBRID_PCTV:
dev->dvb.frontend = dvb_attach(zl10353_attach,
&cx88_geniatech_x8000_mt,
&core->i2c_adap);
if (attach_xc3028(0x61, dev) < 0)
goto frontend_detach;
break;
case CX88_BOARD_GENIATECH_X8000_MT:
dev->ts_gen_cntrl = 0x00;
dev->dvb.frontend = dvb_attach(zl10353_attach,
&cx88_geniatech_x8000_mt,
&core->i2c_adap);
if (attach_xc3028(0x61, dev) < 0)
goto frontend_detach;
break;
case CX88_BOARD_KWORLD_ATSC_120:
dev->dvb.frontend = dvb_attach(s5h1409_attach,
&kworld_atsc_120_config,
&core->i2c_adap);
if (attach_xc3028(0x61, dev) < 0)
goto frontend_detach;
break;
case CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD:
dev->dvb.frontend = dvb_attach(s5h1411_attach,
&dvico_fusionhdtv7_config,
&core->i2c_adap);
if (dev->dvb.frontend != NULL) {
/* tuner_config.video_dev must point to
* i2c_adap.algo_data
*/
if (!dvb_attach(xc5000_attach, dev->dvb.frontend,
&core->i2c_adap,
&dvico_fusionhdtv7_tuner_config,
core->i2c_adap.algo_data))
goto frontend_detach;
}
break;
default:
printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card isn't supported yet\n",
core->name);
break;
}
if (NULL == dev->dvb.frontend) {
printk(KERN_ERR
"%s/2: frontend initialization failed\n",
core->name);
return -EINVAL;
}
/* Ensure all frontends negotiate bus access */
dev->dvb.frontend->ops.ts_bus_ctrl = cx88_dvb_bus_ctrl;
/* Put the analog decoder in standby to keep it quiet */
cx88_call_i2c_clients(core, TUNER_SET_STANDBY, NULL);
/* register everything */
return videobuf_dvb_register(&dev->dvb, THIS_MODULE, dev,
&dev->pci->dev, adapter_nr);
frontend_detach:
if (dev->dvb.frontend) {
dvb_frontend_detach(dev->dvb.frontend);
dev->dvb.frontend = NULL;
}
return -EINVAL;
}
/* ----------------------------------------------------------- */
/* CX8802 MPEG -> mini driver - We have been given the hardware */
static int cx8802_dvb_advise_acquire(struct cx8802_driver *drv)
{
struct cx88_core *core = drv->core;
int err = 0;
dprintk( 1, "%s\n", __func__);
switch (core->boardnr) {
case CX88_BOARD_HAUPPAUGE_HVR1300:
/* We arrive here with either the cx23416 or the cx22702
* on the bus. Take the bus from the cx23416 and enable the
* cx22702 demod
*/
cx_set(MO_GP0_IO, 0x00000080); /* cx22702 out of reset and enable */
cx_clear(MO_GP0_IO, 0x00000004);
udelay(1000);
break;
default:
err = -ENODEV;
}
return err;
}
/* CX8802 MPEG -> mini driver - We no longer have the hardware */
static int cx8802_dvb_advise_release(struct cx8802_driver *drv)
{
struct cx88_core *core = drv->core;
int err = 0;
dprintk( 1, "%s\n", __func__);
switch (core->boardnr) {
case CX88_BOARD_HAUPPAUGE_HVR1300:
/* Do Nothing, leave the cx22702 on the bus. */
break;
default:
err = -ENODEV;
}
return err;
}
static int cx8802_dvb_probe(struct cx8802_driver *drv)
{
struct cx88_core *core = drv->core;
struct cx8802_dev *dev = drv->core->dvbdev;
int err;
dprintk( 1, "%s\n", __func__);
dprintk( 1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n",
core->boardnr,
core->name,
core->pci_bus,
core->pci_slot);
err = -ENODEV;
if (!(core->board.mpeg & CX88_MPEG_DVB))
goto fail_core;
/* If vp3054 isn't enabled, a stub will just return 0 */
err = vp3054_i2c_probe(dev);
if (0 != err)
goto fail_core;
/* dvb stuff */
printk(KERN_INFO "%s/2: cx2388x based DVB/ATSC card\n", core->name);
videobuf_queue_sg_init(&dev->dvb.dvbq, &dvb_qops,
&dev->pci->dev, &dev->slock,
V4L2_BUF_TYPE_VIDEO_CAPTURE,
V4L2_FIELD_TOP,
sizeof(struct cx88_buffer),
dev);
err = dvb_register(dev);
if (err != 0)
printk(KERN_ERR "%s/2: dvb_register failed (err = %d)\n",
core->name, err);
fail_core:
return err;
}
static int cx8802_dvb_remove(struct cx8802_driver *drv)
{
struct cx8802_dev *dev = drv->core->dvbdev;
/* dvb */
if (dev->dvb.frontend)
videobuf_dvb_unregister(&dev->dvb);
vp3054_i2c_remove(dev);
return 0;
}
static struct cx8802_driver cx8802_dvb_driver = {
.type_id = CX88_MPEG_DVB,
.hw_access = CX8802_DRVCTL_SHARED,
.probe = cx8802_dvb_probe,
.remove = cx8802_dvb_remove,
.advise_acquire = cx8802_dvb_advise_acquire,
.advise_release = cx8802_dvb_advise_release,
};
static int dvb_init(void)
{
printk(KERN_INFO "cx88/2: cx2388x dvb driver version %d.%d.%d loaded\n",
(CX88_VERSION_CODE >> 16) & 0xff,
(CX88_VERSION_CODE >> 8) & 0xff,
CX88_VERSION_CODE & 0xff);
#ifdef SNAPSHOT
printk(KERN_INFO "cx2388x: snapshot date %04d-%02d-%02d\n",
SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100);
#endif
return cx8802_register_driver(&cx8802_dvb_driver);
}
static void dvb_fini(void)
{
cx8802_unregister_driver(&cx8802_dvb_driver);
}
module_init(dvb_init);
module_exit(dvb_fini);
static int dvb_register(struct cx23885_tsport *port)
{
struct cx23885_dev *dev = port->dev;
struct cx23885_i2c *i2c_bus = NULL;
/* init struct videobuf_dvb */
port->dvb.name = dev->name;
/* init frontend */
switch (dev->board) {
case CX23885_BOARD_HAUPPAUGE_HVR1250:
i2c_bus = &dev->i2c_bus[0];
port->dvb.frontend = dvb_attach(s5h1409_attach,
&hauppauge_generic_config,
&i2c_bus->i2c_adap);
if (port->dvb.frontend != NULL) {
dvb_attach(mt2131_attach, port->dvb.frontend,
&i2c_bus->i2c_adap,
&hauppauge_generic_tunerconfig, 0);
}
break;
case CX23885_BOARD_HAUPPAUGE_HVR1800:
i2c_bus = &dev->i2c_bus[0];
switch (alt_tuner) {
case 1:
port->dvb.frontend =
dvb_attach(s5h1409_attach,
&hauppauge_ezqam_config,
&i2c_bus->i2c_adap);
if (port->dvb.frontend != NULL) {
dvb_attach(tda829x_attach, port->dvb.frontend,
&dev->i2c_bus[1].i2c_adap, 0x42,
&tda829x_no_probe);
dvb_attach(tda18271_attach, port->dvb.frontend,
0x60, &dev->i2c_bus[1].i2c_adap,
&hauppauge_tda18271_config);
}
break;
case 0:
default:
port->dvb.frontend =
dvb_attach(s5h1409_attach,
&hauppauge_generic_config,
&i2c_bus->i2c_adap);
if (port->dvb.frontend != NULL)
dvb_attach(mt2131_attach, port->dvb.frontend,
&i2c_bus->i2c_adap,
&hauppauge_generic_tunerconfig, 0);
break;
}
break;
case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
i2c_bus = &dev->i2c_bus[0];
port->dvb.frontend = dvb_attach(s5h1409_attach,
&hauppauge_hvr1800lp_config,
&i2c_bus->i2c_adap);
if (port->dvb.frontend != NULL) {
dvb_attach(mt2131_attach, port->dvb.frontend,
&i2c_bus->i2c_adap,
&hauppauge_generic_tunerconfig, 0);
}
break;
case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP:
i2c_bus = &dev->i2c_bus[0];
port->dvb.frontend = dvb_attach(lgdt330x_attach,
&fusionhdtv_5_express,
&i2c_bus->i2c_adap);
if (port->dvb.frontend != NULL) {
dvb_attach(simple_tuner_attach, port->dvb.frontend,
&i2c_bus->i2c_adap, 0x61,
TUNER_LG_TDVS_H06XF);
}
break;
case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
i2c_bus = &dev->i2c_bus[1];
port->dvb.frontend = dvb_attach(s5h1409_attach,
&hauppauge_hvr1500q_config,
&dev->i2c_bus[0].i2c_adap);
if (port->dvb.frontend != NULL)
dvb_attach(xc5000_attach, port->dvb.frontend,
&i2c_bus->i2c_adap,
&hauppauge_hvr1500q_tunerconfig, i2c_bus);
break;
case CX23885_BOARD_HAUPPAUGE_HVR1500:
i2c_bus = &dev->i2c_bus[1];
port->dvb.frontend = dvb_attach(s5h1409_attach,
&hauppauge_hvr1500_config,
&dev->i2c_bus[0].i2c_adap);
if (port->dvb.frontend != NULL) {
struct dvb_frontend *fe;
struct xc2028_config cfg = {
.i2c_adap = &i2c_bus->i2c_adap,
.i2c_addr = 0x61,
.callback = cx23885_hvr1500_xc3028_callback,
};
static struct xc2028_ctrl ctl = {
.fname = "xc3028-v27.fw",
.max_len = 64,
.scode_table = XC3028_FE_OREN538,
};
fe = dvb_attach(xc2028_attach,
port->dvb.frontend, &cfg);
if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
fe->ops.tuner_ops.set_config(fe, &ctl);
}
break;
case CX23885_BOARD_HAUPPAUGE_HVR1200:
case CX23885_BOARD_HAUPPAUGE_HVR1700:
i2c_bus = &dev->i2c_bus[0];
port->dvb.frontend = dvb_attach(tda10048_attach,
&hauppauge_hvr1200_config,
&i2c_bus->i2c_adap);
if (port->dvb.frontend != NULL) {
dvb_attach(tda829x_attach, port->dvb.frontend,
&dev->i2c_bus[1].i2c_adap, 0x42,
&tda829x_no_probe);
dvb_attach(tda18271_attach, port->dvb.frontend,
0x60, &dev->i2c_bus[1].i2c_adap,
&hauppauge_hvr1200_tuner_config);
}
break;
case CX23885_BOARD_HAUPPAUGE_HVR1400:
i2c_bus = &dev->i2c_bus[0];
port->dvb.frontend = dvb_attach(dib7000p_attach,
&i2c_bus->i2c_adap,
0x12, &hauppauge_hvr1400_dib7000_config);
if (port->dvb.frontend != NULL) {
struct dvb_frontend *fe;
struct xc2028_config cfg = {
.i2c_adap = &dev->i2c_bus[1].i2c_adap,
.i2c_addr = 0x64,
.callback = cx23885_hvr1500_xc3028_callback,
};
static struct xc2028_ctrl ctl = {
.fname = "xc3028L-v36.fw",
.max_len = 64,
.demod = 5000,
.d2633 = 1
};
fe = dvb_attach(xc2028_attach,
port->dvb.frontend, &cfg);
if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
fe->ops.tuner_ops.set_config(fe, &ctl);
}
break;
case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
i2c_bus = &dev->i2c_bus[port->nr - 1];
port->dvb.frontend = dvb_attach(s5h1409_attach,
&dvico_s5h1409_config,
&i2c_bus->i2c_adap);
if (port->dvb.frontend == NULL)
port->dvb.frontend = dvb_attach(s5h1411_attach,
&dvico_s5h1411_config,
&i2c_bus->i2c_adap);
if (port->dvb.frontend != NULL)
dvb_attach(xc5000_attach, port->dvb.frontend,
&i2c_bus->i2c_adap,
&dvico_xc5000_tunerconfig, i2c_bus);
break;
default:
printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n",
dev->name);
break;
}
if (NULL == port->dvb.frontend) {
printk("%s: frontend initialization failed\n", dev->name);
return -1;
}
/* Put the analog decoder in standby to keep it quiet */
cx23885_call_i2c_clients(i2c_bus, TUNER_SET_STANDBY, NULL);
if (port->dvb.frontend->ops.analog_ops.standby)
port->dvb.frontend->ops.analog_ops.standby(port->dvb.frontend);
/* register everything */
return videobuf_dvb_register(&port->dvb, THIS_MODULE, port,
&dev->pci->dev, adapter_nr);
}
int cx23885_dvb_register(struct cx23885_tsport *port)
{
struct cx23885_dev *dev = port->dev;
int err;
dprintk(1, "%s\n", __func__);
dprintk(1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n",
dev->board,
dev->name,
dev->pci_bus,
dev->pci_slot);
err = -ENODEV;
/* dvb stuff */
printk("%s: cx23885 based dvb card\n", dev->name);
videobuf_queue_sg_init(&port->dvb.dvbq, &dvb_qops, &dev->pci->dev, &port->slock,
V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_TOP,
sizeof(struct cx23885_buffer), port);
err = dvb_register(port);
if (err != 0)
printk("%s() dvb_register failed err = %d\n", __func__, err);
return err;
}
int cx23885_dvb_unregister(struct cx23885_tsport *port)
{
/* dvb */
if(port->dvb.frontend)
videobuf_dvb_unregister(&port->dvb);
return 0;
}