static cairo_status_t
line_to (void *closure,
const cairo_point_t *point)
{
struct stroker *stroker = closure;
cairo_stroke_face_t start;
cairo_point_t *p1 = &stroker->current_face.point;
cairo_slope_t dev_slope;
stroker->has_initial_sub_path = TRUE;
if (p1->x == point->x && p1->y == point->y)
return CAIRO_STATUS_SUCCESS;
#if DEBUG
_cairo_contour_add_point (&stroker->path, point);
#endif
_cairo_slope_init (&dev_slope, p1, point);
compute_face (p1, &dev_slope, stroker, &start);
if (stroker->has_current_face) {
int clockwise = _cairo_slope_compare (&stroker->current_face.dev_vector,
&start.dev_vector);
if (clockwise) {
clockwise = clockwise < 0;
/* Join with final face from previous segment */
if (! within_tolerance (&stroker->current_face.ccw, &start.ccw,
stroker->contour_tolerance) ||
! within_tolerance (&stroker->current_face.cw, &start.cw,
stroker->contour_tolerance))
{
outer_join (stroker, &stroker->current_face, &start, clockwise);
inner_join (stroker, &stroker->current_face, &start, clockwise);
}
}
} else {
if (! stroker->has_first_face) {
/* Save sub path's first face in case needed for closing join */
stroker->first_face = start;
stroker->has_first_face = TRUE;
}
stroker->has_current_face = TRUE;
contour_add_point (stroker, &stroker->cw, &start.cw);
contour_add_point (stroker, &stroker->ccw, &start.ccw);
}
stroker->current_face = start;
stroker->current_face.point = *point;
stroker->current_face.ccw.x += dev_slope.dx;
stroker->current_face.ccw.y += dev_slope.dy;
stroker->current_face.cw.x += dev_slope.dx;
stroker->current_face.cw.y += dev_slope.dy;
contour_add_point (stroker, &stroker->cw, &stroker->current_face.cw);
contour_add_point (stroker, &stroker->ccw, &stroker->current_face.ccw);
return CAIRO_STATUS_SUCCESS;
}
// Check for equality.
// Return number of mismatches greater than epsilon.
virtual idx_t compare(const GenericGridBase<T>* ref, T epsilon,
int maxPrint = 0,
std::ostream& os = std::cerr) const {
auto ref1 = dynamic_cast<const GenericGrid1d*>(ref);
if (!ref1) {
os << "** type mismatch against GenericGrid1d." << endl;
return 1;
}
// Quick check for errors.
idx_t errs = count_diffs(*ref, epsilon);
// Run detailed comparison if any errors found.
if (errs > 0 && maxPrint) {
int p = 0;
for (idx_t i1 = 0; i1 < get_d1(); i1++) {
T te = (*this)(i1);
T re = (*ref1)(i1);
if (!within_tolerance(te, re, epsilon)) {
p++;
if (p < maxPrint)
os << "** mismatch at (" << i1 << "): " <<
te << " != " << re << std::endl;
else if (p == maxPrint)
os << "** Additional errors not printed." << std::endl;
else
goto done;
}
}
}
done:
return errs;
}
// Check for equality.
// Return number of mismatches greater than epsilon.
virtual idx_t compare(const GenericGridBase<T>* ref, T epsilon,
int maxPrint = 0,
std::ostream& os = std::cerr) const {
auto ref1 = dynamic_cast<const GenericGrid0d*>(ref);
if (!ref1) {
os << "** type mismatch against GenericGrid0d." << endl;
return 1;
}
// Quick check for errors.
idx_t errs = count_diffs(*ref, epsilon);
// Run detailed comparison if any errors found.
if (errs > 0 && maxPrint) {
T te = (*this)();
T re = (*ref1)();
if (!within_tolerance(te, re, epsilon)) {
os << "** scalar mismatch: " <<
te << " != " << re << std::endl;
}
}
return errs;
}
static void
contour_add_point (struct stroker *stroker,
struct stroke_contour *c,
const cairo_point_t *point)
{
if (! within_tolerance (point, _cairo_contour_last_point (&c->contour),
stroker->contour_tolerance))
_cairo_contour_add_point (&c->contour, point);
//*_cairo_contour_last_point (&c->contour) = *point;
}
// Check for equality.
// Return number of mismatches greater than epsilon.
virtual idx_t count_diffs(const GenericGridBase<T>& ref, T epsilon) const {
idx_t errs = 0;
// Count abs diffs > epsilon.
#pragma omp parallel for reduction(+:errs)
for (idx_t ai = 0; ai < get_num_elems(); ai++) {
if (!within_tolerance(_elems[ai], ref._elems[ai], epsilon))
errs++;
}
return errs;
}
static void
outer_close (struct stroker *stroker,
const cairo_stroke_face_t *in,
const cairo_stroke_face_t *out)
{
const cairo_point_t *inpt, *outpt;
struct stroke_contour *outer;
int clockwise;
if (in->cw.x == out->cw.x && in->cw.y == out->cw.y &&
in->ccw.x == out->ccw.x && in->ccw.y == out->ccw.y)
{
return;
}
clockwise = join_is_clockwise (in, out);
if (clockwise) {
inpt = &in->cw;
outpt = &out->cw;
outer = &stroker->cw;
} else {
inpt = &in->ccw;
outpt = &out->ccw;
outer = &stroker->ccw;
}
if (within_tolerance (inpt, outpt, stroker->contour_tolerance)) {
*_cairo_contour_first_point (&outer->contour) =
*_cairo_contour_last_point (&outer->contour);
return;
}
switch (stroker->style.line_join) {
case CAIRO_LINE_JOIN_ROUND:
/* construct a fan around the common midpoint */
if ((in->dev_slope.x * out->dev_slope.x +
in->dev_slope.y * out->dev_slope.y) < stroker->spline_cusp_tolerance)
{
add_fan (stroker,
&in->dev_vector, &out->dev_vector, &in->point,
clockwise, outer);
break;
}
case CAIRO_LINE_JOIN_MITER:
default: {
/* dot product of incoming slope vector with outgoing slope vector */
double in_dot_out = in->dev_slope.x * out->dev_slope.x +
in->dev_slope.y * out->dev_slope.y;
double ml = stroker->style.miter_limit;
/* Check the miter limit -- lines meeting at an acute angle
* can generate long miters, the limit converts them to bevel
*
* Consider the miter join formed when two line segments
* meet at an angle psi:
*
* /.\
* /. .\
* /./ \.\
* /./psi\.\
*
* We can zoom in on the right half of that to see:
*
* |\
* | \ psi/2
* | \
* | \
* | \
* | \
* miter \
* length \
* | \
* | .\
* | . \
* |. line \
* \ width \
* \ \
*
*
* The right triangle in that figure, (the line-width side is
* shown faintly with three '.' characters), gives us the
* following expression relating miter length, angle and line
* width:
*
* 1 /sin (psi/2) = miter_length / line_width
*
* The right-hand side of this relationship is the same ratio
* in which the miter limit (ml) is expressed. We want to know
* when the miter length is within the miter limit. That is
* when the following condition holds:
*
* 1/sin(psi/2) <= ml
* 1 <= ml sin(psi/2)
* 1 <= ml² sin²(psi/2)
* 2 <= ml² 2 sin²(psi/2)
* 2·sin²(psi/2) = 1-cos(psi)
* 2 <= ml² (1-cos(psi))
*
* in · out = |in| |out| cos (psi)
*
* in and out are both unit vectors, so:
*
* in · out = cos (psi)
*
* 2 <= ml² (1 - in · out)
*
*/
if (2 <= ml * ml * (1 + in_dot_out)) {
double x1, y1, x2, y2;
double mx, my;
double dx1, dx2, dy1, dy2;
double ix, iy;
double fdx1, fdy1, fdx2, fdy2;
double mdx, mdy;
/*
* we've got the points already transformed to device
* space, but need to do some computation with them and
* also need to transform the slope from user space to
* device space
*/
/* outer point of incoming line face */
x1 = _cairo_fixed_to_double (inpt->x);
y1 = _cairo_fixed_to_double (inpt->y);
dx1 = in->dev_slope.x;
dy1 = in->dev_slope.y;
/* outer point of outgoing line face */
x2 = _cairo_fixed_to_double (outpt->x);
y2 = _cairo_fixed_to_double (outpt->y);
dx2 = out->dev_slope.x;
dy2 = out->dev_slope.y;
/*
* Compute the location of the outer corner of the miter.
* That's pretty easy -- just the intersection of the two
* outer edges. We've got slopes and points on each
* of those edges. Compute my directly, then compute
* mx by using the edge with the larger dy; that avoids
* dividing by values close to zero.
*/
my = (((x2 - x1) * dy1 * dy2 - y2 * dx2 * dy1 + y1 * dx1 * dy2) /
(dx1 * dy2 - dx2 * dy1));
if (fabs (dy1) >= fabs (dy2))
mx = (my - y1) * dx1 / dy1 + x1;
else
mx = (my - y2) * dx2 / dy2 + x2;
/*
* When the two outer edges are nearly parallel, slight
* perturbations in the position of the outer points of the lines
* caused by representing them in fixed point form can cause the
* intersection point of the miter to move a large amount. If
* that moves the miter intersection from between the two faces,
* then draw a bevel instead.
*/
ix = _cairo_fixed_to_double (in->point.x);
iy = _cairo_fixed_to_double (in->point.y);
/* slope of one face */
fdx1 = x1 - ix; fdy1 = y1 - iy;
/* slope of the other face */
fdx2 = x2 - ix; fdy2 = y2 - iy;
/* slope from the intersection to the miter point */
mdx = mx - ix; mdy = my - iy;
/*
* Make sure the miter point line lies between the two
* faces by comparing the slopes
*/
if (slope_compare_sgn (fdx1, fdy1, mdx, mdy) !=
slope_compare_sgn (fdx2, fdy2, mdx, mdy))
{
cairo_point_t p;
p.x = _cairo_fixed_from_double (mx);
p.y = _cairo_fixed_from_double (my);
*_cairo_contour_last_point (&outer->contour) = p;
*_cairo_contour_first_point (&outer->contour) = p;
return;
}
}
break;
}
case CAIRO_LINE_JOIN_BEVEL:
break;
}
contour_add_point (stroker, outer, outpt);
}
static double test_gradients(Crystal *cr, double incr_val, int refine,
const char *str, const char *file,
PartialityModel pmodel, int quiet, int plot)
{
Reflection *refl;
RefListIterator *iter;
long double *vals[3];
int i;
int *valid;
int nref;
int n_good, n_invalid, n_small, n_nan, n_bad;
RefList *reflections;
FILE *fh = NULL;
int ntot = 0;
double total = 0.0;
char tmp[32];
double *vec1;
double *vec2;
int n_line;
double cc;
reflections = find_intersections(crystal_get_image(cr), cr, pmodel);
crystal_set_reflections(cr, reflections);
nref = num_reflections(reflections);
if ( nref < 10 ) {
ERROR("Too few reflections found. Failing test by default.\n");
return 0.0;
}
vals[0] = malloc(nref*sizeof(long double));
vals[1] = malloc(nref*sizeof(long double));
vals[2] = malloc(nref*sizeof(long double));
if ( (vals[0] == NULL) || (vals[1] == NULL) || (vals[2] == NULL) ) {
ERROR("Couldn't allocate memory.\n");
return 0.0;
}
valid = malloc(nref*sizeof(int));
if ( valid == NULL ) {
ERROR("Couldn't allocate memory.\n");
return 0.0;
}
for ( i=0; i<nref; i++ ) valid[i] = 1;
scan_partialities(reflections, reflections, valid, vals, 1, pmodel);
calc_either_side(cr, incr_val, valid, vals, refine, pmodel);
if ( plot ) {
snprintf(tmp, 32, "gradient-test-%s.dat", file);
fh = fopen(tmp, "w");
}
vec1 = malloc(nref*sizeof(double));
vec2 = malloc(nref*sizeof(double));
if ( (vec1 == NULL) || (vec2 == NULL) ) {
ERROR("Couldn't allocate memory.\n");
return 0.0;
}
n_invalid = 0; n_good = 0;
n_nan = 0; n_small = 0; n_bad = 0; n_line = 0;
i = 0;
for ( refl = first_refl(reflections, &iter);
refl != NULL;
refl = next_refl(refl, iter) )
{
long double grad1, grad2, grad;
double cgrad;
signed int h, k, l;
get_indices(refl, &h, &k, &l);
if ( !valid[i] ) {
n_invalid++;
i++;
} else {
double r1, r2, p;
grad1 = (vals[1][i] - vals[0][i]) / incr_val;
grad2 = (vals[2][i] - vals[1][i]) / incr_val;
grad = (grad1 + grad2) / 2.0;
i++;
cgrad = p_gradient(cr, refine, refl, pmodel);
get_partial(refl, &r1, &r2, &p);
if ( isnan(cgrad) ) {
n_nan++;
continue;
}
if ( plot ) {
fprintf(fh, "%e %Le\n", cgrad, grad);
}
vec1[n_line] = cgrad;
vec2[n_line] = grad;
n_line++;
if ( (fabs(cgrad) < 5e-8) && (fabs(grad) < 5e-8) ) {
n_small++;
continue;
}
total += fabs(cgrad - grad);
ntot++;
if ( !within_tolerance(grad, cgrad, 5.0)
|| !within_tolerance(cgrad, grad, 5.0) )
{
if ( !quiet ) {
STATUS("!- %s %3i %3i %3i"
" %10.2Le %10.2e ratio = %5.2Lf"
" %10.2e %10.2e\n",
str, h, k, l, grad, cgrad,
cgrad/grad, r1, r2);
}
n_bad++;
} else {
//STATUS("OK %s %3i %3i %3i"
// " %10.2Le %10.2e ratio = %5.2Lf"
// " %10.2e %10.2e\n",
// str, h, k, l, grad, cgrad, cgrad/grad,
// r1, r2);
n_good++;
}
}
}
STATUS("%3s: %3i within 5%%, %3i outside, %3i nan, %3i invalid, "
"%3i small. ", str, n_good, n_bad, n_nan, n_invalid, n_small);
if ( plot ) {
fclose(fh);
}
cc = gsl_stats_correlation(vec1, 1, vec2, 1, n_line);
STATUS("CC = %+f\n", cc);
return cc;
}
