Exemple #1
0
void
NWWriter_OpenDrive::writeNormalEdge(OutputDevice& device, const NBEdge* e,
                                    int edgeID, int fromNodeID, int toNodeID,
                                    const bool origNames,
                                    const double straightThresh) {
    // buffer output because some fields are computed out of order
    OutputDevice_String elevationOSS(false, 3);
    elevationOSS.setPrecision(8);
    OutputDevice_String planViewOSS(false, 2);
    planViewOSS.setPrecision(8);
    double length = 0;

    planViewOSS.openTag("planView");
    // for the shape we need to use the leftmost border of the leftmost lane
    const std::vector<NBEdge::Lane>& lanes = e->getLanes();
    PositionVector ls = getLeftLaneBorder(e);
#ifdef DEBUG_SMOOTH_GEOM
    if (DEBUGCOND) {
        std::cout << "write planview for edge " << e->getID() << "\n";
    }
#endif

    if (ls.size() == 2 || e->getPermissions() == SVC_PEDESTRIAN) {
        // foot paths may contain sharp angles
        length = writeGeomLines(ls, planViewOSS, elevationOSS);
    } else {
        bool ok = writeGeomSmooth(ls, e->getSpeed(), planViewOSS, elevationOSS, straightThresh, length);
        if (!ok) {
            WRITE_WARNING("Could not compute smooth shape for edge '" + e->getID() + "'.");
        }
    }
    planViewOSS.closeTag();

    device.openTag("road");
    device.writeAttr("name", StringUtils::escapeXML(e->getStreetName()));
    device.setPrecision(8); // length requires higher precision
    device.writeAttr("length", MAX2(POSITION_EPS, length));
    device.setPrecision(gPrecision);
    device.writeAttr("id", edgeID);
    device.writeAttr("junction", -1);
    if (fromNodeID != INVALID_ID || toNodeID != INVALID_ID) {
        device.openTag("link");
        if (fromNodeID != INVALID_ID) {
            device.openTag("predecessor");
            device.writeAttr("elementType", "junction");
            device.writeAttr("elementId", fromNodeID);
            device.closeTag();
        }
        if (toNodeID != INVALID_ID) {
            device.openTag("successor");
            device.writeAttr("elementType", "junction");
            device.writeAttr("elementId", toNodeID);
            device.closeTag();
        }
        device.closeTag();
    }
    device.openTag("type").writeAttr("s", 0).writeAttr("type", "town").closeTag();
    device << planViewOSS.getString();
    writeElevationProfile(ls, device, elevationOSS);
    device << "        <lateralProfile/>\n";
    device << "        <lanes>\n";
    device << "            <laneSection s=\"0\">\n";
    const std::string centerMark = e->getPermissions(e->getNumLanes() - 1) == 0 ? "none" : "solid";
    writeEmptyCenterLane(device, centerMark, 0.13);
    device << "                <right>\n";
    for (int j = e->getNumLanes(); --j >= 0;) {
        device << "                    <lane id=\"-" << e->getNumLanes() - j << "\" type=\"" << getLaneType(e->getPermissions(j)) << "\" level=\"true\">\n";
        device << "                        <link/>\n";
        // this could be used for geometry-link junctions without u-turn,
        // predecessor and sucessors would be lane indices,
        // road predecessor / succesfors would be of type 'road' rather than
        // 'junction'
        //device << "                            <predecessor id=\"-1\"/>\n";
        //device << "                            <successor id=\"-1\"/>\n";
        //device << "                        </link>\n";
        device << "                        <width sOffset=\"0\" a=\"" << e->getLaneWidth(j) << "\" b=\"0\" c=\"0\" d=\"0\"/>\n";
        std::string markType = "broken";
        if (j == 0) {
            markType = "solid";
        } else if (j > 0
                   && (e->getPermissions(j - 1) & ~(SVC_PEDESTRIAN | SVC_BICYCLE)) == 0) {
            // solid road mark to the left of sidewalk or bicycle lane
            markType = "solid";
        } else if (e->getPermissions(j) == 0) {
            // solid road mark to the right of a forbidden lane
            markType = "solid";
        }
        device << "                        <roadMark sOffset=\"0\" type=\"" << markType << "\" weight=\"standard\" color=\"standard\" width=\"0.13\"/>\n";
        device << "                        <speed sOffset=\"0\" max=\"" << lanes[j].speed << "\"/>\n";
        device << "                    </lane>\n";
    }
    device << "                 </right>\n";
    device << "            </laneSection>\n";
    device << "        </lanes>\n";
    device << "        <objects/>\n";
    device << "        <signals/>\n";
    if (origNames) {
        device << "        <userData code=\"sumoId\" value=\"" << e->getID() << "\"/>\n";
    }
    device.closeTag();
    checkLaneGeometries(e);
}
Exemple #2
0
int
NWWriter_OpenDrive::writeInternalEdge(OutputDevice& device, OutputDevice& junctionDevice, const NBEdge* inEdge, int nodeID,
                                      int edgeID, int inEdgeID, int outEdgeID,
                                      int connectionID,
                                      const std::vector<NBEdge::Connection>& parallel,
                                      const bool isOuterEdge,
                                      const double straightThresh,
                                      const std::string& centerMark) {
    assert(parallel.size() != 0);
    const NBEdge::Connection& cLeft = parallel.back();
    const NBEdge* outEdge = cLeft.toEdge;
    PositionVector begShape = getLeftLaneBorder(inEdge, cLeft.fromLane);
    PositionVector endShape = getLeftLaneBorder(outEdge, cLeft.toLane);
    //std::cout << "computing reference line for internal lane " << cLeft.getInternalLaneID() << " begLane=" << inEdge->getLaneShape(cLeft.fromLane) << " endLane=" << outEdge->getLaneShape(cLeft.toLane) << "\n";

    double length;
    double laneOffset = 0;
    PositionVector fallBackShape;
    fallBackShape.push_back(begShape.back());
    fallBackShape.push_back(endShape.front());
    const bool turnaround = inEdge->isTurningDirectionAt(outEdge);
    bool ok = true;
    PositionVector init = NBNode::bezierControlPoints(begShape, endShape, turnaround, 25, 25, ok, 0, straightThresh);
    if (init.size() == 0) {
        length = fallBackShape.length2D();
        // problem with turnarounds is known, method currently returns 'ok' (#2539)
        if (!ok) {
            WRITE_WARNING("Could not compute smooth shape from lane '" + inEdge->getLaneID(cLeft.fromLane) + "' to lane '" + outEdge->getLaneID(cLeft.toLane) + "'. Use option 'junctions.scurve-stretch' or increase radius of junction '" + inEdge->getToNode()->getID() + "' to fix this.");
        } else if (length <= NUMERICAL_EPS) {
            // left-curving geometry-like edges must use the right
            // side as reference line and shift
            begShape = getRightLaneBorder(inEdge, cLeft.fromLane);
            endShape = getRightLaneBorder(outEdge, cLeft.toLane);
            init = NBNode::bezierControlPoints(begShape, endShape, turnaround, 25, 25, ok, 0, straightThresh);
            if (init.size() != 0) {
                length = bezier(init, 12).length2D();
                laneOffset = outEdge->getLaneWidth(cLeft.toLane);
                //std::cout << " internalLane=" << cLeft.getInternalLaneID() << " length=" << length << "\n";
            }
        }
    } else {
        length = bezier(init, 12).length2D();
    }

    junctionDevice << "        <connection id=\"" << connectionID << "\" incomingRoad=\"" << inEdgeID << "\" connectingRoad=\"" << edgeID << "\" contactPoint=\"start\">\n";
    device.openTag("road");
    device.writeAttr("name", cLeft.id);
    device.setPrecision(8); // length requires higher precision
    device.writeAttr("length", MAX2(POSITION_EPS, length));
    device.setPrecision(gPrecision);
    device.writeAttr("id", edgeID);
    device.writeAttr("junction", nodeID);
    device.openTag("link");
    device.openTag("predecessor");
    device.writeAttr("elementType", "road");
    device.writeAttr("elementId", inEdgeID);
    device.writeAttr("contactPoint", "end");
    device.closeTag();
    device.openTag("successor");
    device.writeAttr("elementType", "road");
    device.writeAttr("elementId", outEdgeID);
    device.writeAttr("contactPoint", "start");
    device.closeTag();
    device.closeTag();
    device.openTag("type").writeAttr("s", 0).writeAttr("type", "town").closeTag();
    device.openTag("planView");
    device.setPrecision(8); // geometry hdg requires higher precision
    OutputDevice_String elevationOSS(false, 3);
    elevationOSS.setPrecision(8);
#ifdef DEBUG_SMOOTH_GEOM
    if (DEBUGCOND) {
        std::cout << "write planview for internal edge " << cLeft.id << " init=" << init << " fallback=" << fallBackShape
                  << " begShape=" << begShape << " endShape=" << endShape
                  << "\n";
    }
#endif
    if (init.size() == 0) {
        writeGeomLines(fallBackShape, device, elevationOSS);
    } else {
        writeGeomPP3(device, elevationOSS, init, length);
    }
    device.setPrecision(gPrecision);
    device.closeTag();
    writeElevationProfile(fallBackShape, device, elevationOSS);
    device << "        <lateralProfile/>\n";
    device << "        <lanes>\n";
    if (laneOffset != 0) {
        device << "            <laneOffset s=\"0\" a=\"" << laneOffset << "\" b=\"0\" c=\"0\" d=\"0\"/>\n";
    }
    device << "            <laneSection s=\"0\">\n";
    writeEmptyCenterLane(device, centerMark, 0);
    device << "                <right>\n";
    for (int j = (int)parallel.size(); --j >= 0;) {
        const NBEdge::Connection& c = parallel[j];
        const int fromIndex = c.fromLane - inEdge->getNumLanes();
        const int toIndex = c.toLane - outEdge->getNumLanes();
        device << "                    <lane id=\"-" << parallel.size() - j << "\" type=\"" << getLaneType(outEdge->getPermissions(c.toLane)) << "\" level=\"true\">\n";
        device << "                        <link>\n";
        device << "                            <predecessor id=\"" << fromIndex << "\"/>\n";
        device << "                            <successor id=\"" << toIndex << "\"/>\n";
        device << "                        </link>\n";
        device << "                        <width sOffset=\"0\" a=\"" << outEdge->getLaneWidth(c.toLane) << "\" b=\"0\" c=\"0\" d=\"0\"/>\n";
        std::string markType = "broken";
        if (inEdge->isTurningDirectionAt(outEdge)) {
            markType = "none";
        } else if (c.fromLane == 0 && c.toLane == 0 && isOuterEdge) {
            // solid road mark at the outer border
            markType = "solid";
        } else if (isOuterEdge && j > 0
                   && (outEdge->getPermissions(parallel[j - 1].toLane) & ~(SVC_PEDESTRIAN | SVC_BICYCLE)) == 0) {
            // solid road mark to the left of sidewalk or bicycle lane
            markType = "solid";
        } else if (!inEdge->getToNode()->geometryLike()) {
            // draw shorter road marks to indicate turning paths
            LinkDirection dir = inEdge->getToNode()->getDirection(inEdge, outEdge, OptionsCont::getOptions().getBool("lefthand"));
            if (dir == LINKDIR_LEFT || dir == LINKDIR_RIGHT || dir == LINKDIR_PARTLEFT || dir == LINKDIR_PARTRIGHT) {
                // XXX <type><line/><type> is not rendered by odrViewer so cannot be validated
                // device << "                             <type name=\"broken\" width=\"0.13\">\n";
                // device << "                                  <line length=\"0.5\" space=\"0.5\" tOffset=\"0\" sOffset=\"0\" rule=\"none\"/>\n";
                // device << "                             </type>\n";
                markType = "none";
            }
        }
        device << "                        <roadMark sOffset=\"0\" type=\"" << markType << "\" weight=\"standard\" color=\"standard\" width=\"0.13\"/>\n";
        device << "                        <speed sOffset=\"0\" max=\"" << c.vmax << "\"/>\n";
        device << "                    </lane>\n";

        junctionDevice << "            <laneLink from=\"" << fromIndex << "\" to=\"" << toIndex << "\"/>\n";
        connectionID++;
    }
    device << "                 </right>\n";
    device << "            </laneSection>\n";
    device << "        </lanes>\n";
    device << "        <objects/>\n";
    device << "        <signals/>\n";
    device.closeTag();
    junctionDevice << "        </connection>\n";

    return connectionID;
}
// ===========================================================================
// method definitions
// ===========================================================================
// ---------------------------------------------------------------------------
// static methods
// ---------------------------------------------------------------------------
void
NWWriter_OpenDrive::writeNetwork(const OptionsCont& oc, NBNetBuilder& nb) {
    // check whether an opendrive-file shall be generated
    if (!oc.isSet("opendrive-output")) {
        return;
    }
    const NBNodeCont& nc = nb.getNodeCont();
    const NBEdgeCont& ec = nb.getEdgeCont();
    const bool origNames = oc.getBool("output.original-names");
    const SUMOReal straightThresh = DEG2RAD(oc.getFloat("opendrive-output.straight-threshold"));
    // some internal mapping containers
    int nodeID = 1;
    int edgeID = nc.size() * 10; // distinct from node ids
    StringBijection<int> edgeMap;
    StringBijection<int> nodeMap;
    //
    OutputDevice& device = OutputDevice::getDevice(oc.getString("opendrive-output"));
    device << "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n";
    device.openTag("OpenDRIVE");
    time_t now = time(0);
    std::string dstr(ctime(&now));
    const Boundary& b = GeoConvHelper::getFinal().getConvBoundary();
    // write header
    device.openTag("header");
    device.writeAttr("revMajor", "1");
    device.writeAttr("revMinor", "4");
    device.writeAttr("name", "");
    device.writeAttr("version", "1.00");
    device.writeAttr("date", dstr.substr(0, dstr.length() - 1));
    device.writeAttr("north", b.ymax());
    device.writeAttr("south", b.ymin());
    device.writeAttr("east", b.xmax());
    device.writeAttr("west", b.xmin());
    /* @note obsolete in 1.4
    device.writeAttr("maxRoad", ec.size());
    device.writeAttr("maxJunc", nc.size());
    device.writeAttr("maxPrg", 0);
    */
    device.closeTag();

    // write normal edges (road)
    for (std::map<std::string, NBEdge*>::const_iterator i = ec.begin(); i != ec.end(); ++i) {
        const NBEdge* e = (*i).second;

        // buffer output because some fields are computed out of order
        OutputDevice_String elevationOSS(false, 3);
        elevationOSS.setPrecision(8);
        OutputDevice_String planViewOSS(false, 2);
        planViewOSS.setPrecision(8);
        SUMOReal length = 0;

        planViewOSS.openTag("planView");
        planViewOSS.setPrecision(8); // geometry hdg requires higher precision
        // for the shape we need to use the leftmost border of the leftmost lane
        const std::vector<NBEdge::Lane>& lanes = e->getLanes();
        PositionVector ls = getLeftLaneBorder(e);
#ifdef DEBUG_SMOOTH_GEOM
        if (DEBUGCOND) {
            std::cout << "write planview for edge " << e->getID() << "\n";
        }
#endif

        if (ls.size() == 2 || e->getPermissions() == SVC_PEDESTRIAN) {
            // foot paths may contain sharp angles
            length = writeGeomLines(ls, planViewOSS, elevationOSS);
        } else {
            bool ok = writeGeomSmooth(ls, e->getSpeed(), planViewOSS, elevationOSS, straightThresh, length);
            if (!ok) {
                WRITE_WARNING("Could not compute smooth shape for edge '" + e->getID() + "'.");
            }
        }
        planViewOSS.closeTag();

        device.openTag("road");
        device.writeAttr("name", StringUtils::escapeXML(e->getStreetName()));
        device.setPrecision(8); // length requires higher precision
        device.writeAttr("length", MAX2(POSITION_EPS, length));
        device.setPrecision(OUTPUT_ACCURACY); 
        device.writeAttr("id", getID(e->getID(), edgeMap, edgeID));
        device.writeAttr("junction", -1);
        const bool hasSucc = e->getConnections().size() > 0;
        const bool hasPred = e->getIncomingEdges().size() > 0;
        if (hasPred || hasSucc) {
            device.openTag("link");
            if (hasPred) {
                device.openTag("predecessor");
                device.writeAttr("elementType", "junction");
                device.writeAttr("elementId", getID(e->getFromNode()->getID(), nodeMap, nodeID));
                device.closeTag();
            }
            if (hasSucc) {
                device.openTag("successor");
                device.writeAttr("elementType", "junction");
                device.writeAttr("elementId", getID(e->getToNode()->getID(), nodeMap, nodeID));
                device.closeTag();
            }
            device.closeTag();
        }
        device.openTag("type").writeAttr("s", 0).writeAttr("type", "town").closeTag();
        device << planViewOSS.getString();
        writeElevationProfile(ls, device, elevationOSS);
        device << "        <lateralProfile/>\n";
        device << "        <lanes>\n";
        device << "            <laneSection s=\"0\">\n";
        writeEmptyCenterLane(device, "solid", 0.13);
        device << "                <right>\n";
        for (int j = e->getNumLanes(); --j >= 0;) {
            device << "                    <lane id=\"-" << e->getNumLanes() - j << "\" type=\"" << getLaneType(e->getPermissions(j)) << "\" level=\"true\">\n";
            device << "                        <link/>\n";
            // this could be used for geometry-link junctions without u-turn,
            // predecessor and sucessors would be lane indices,
            // road predecessor / succesfors would be of type 'road' rather than
            // 'junction'
            //device << "                            <predecessor id=\"-1\"/>\n";
            //device << "                            <successor id=\"-1\"/>\n";
            //device << "                        </link>\n";
            device << "                        <width sOffset=\"0\" a=\"" << e->getLaneWidth(j) << "\" b=\"0\" c=\"0\" d=\"0\"/>\n";
            std::string markType = "broken";
            if (j == 0) {
                markType = "solid";
            }
            device << "                        <roadMark sOffset=\"0\" type=\"" << markType << "\" weight=\"standard\" color=\"standard\" width=\"0.13\"/>\n";
            device << "                        <speed sOffset=\"0\" max=\"" << lanes[j].speed << "\"/>\n";
            device << "                    </lane>\n";
        }
        device << "                 </right>\n";
        device << "            </laneSection>\n";
        device << "        </lanes>\n";
        device << "        <objects/>\n";
        device << "        <signals/>\n";
        if (origNames) {
            device << "        <userData code=\"sumoId\" value=\"" << e->getID() << "\"/>\n";
        }
        device.closeTag();
        checkLaneGeometries(e);
    }
    device.lf();

    // write junction-internal edges (road). In OpenDRIVE these are called 'paths' or 'connecting roads'
    for (std::map<std::string, NBNode*>::const_iterator i = nc.begin(); i != nc.end(); ++i) {
        NBNode* n = (*i).second;
        const std::vector<NBEdge*>& incoming = (*i).second->getIncomingEdges();
        for (std::vector<NBEdge*>::const_iterator j = incoming.begin(); j != incoming.end(); ++j) {
            const NBEdge* inEdge = *j;
            const std::vector<NBEdge::Connection>& elv = inEdge->getConnections();
            for (std::vector<NBEdge::Connection>::const_iterator k = elv.begin(); k != elv.end(); ++k) {
                const NBEdge::Connection& c = *k;
                const NBEdge* outEdge = c.toEdge;
                if (outEdge == 0) {
                    continue;
                }
                const SUMOReal width = c.toEdge->getLaneWidth(c.toLane);
                const PositionVector begShape = getLeftLaneBorder(inEdge, c.fromLane);
                const PositionVector endShape = getLeftLaneBorder(outEdge, c.toLane);
                //std::cout << "computing reference line for internal lane " << c.getInternalLaneID() << " begLane=" << inEdge->getLaneShape(c.fromLane) << " endLane=" << outEdge->getLaneShape(c.toLane) << "\n";

                SUMOReal length;
                PositionVector fallBackShape;
                fallBackShape.push_back(begShape.back());
                fallBackShape.push_back(endShape.front());
                const bool turnaround = inEdge->isTurningDirectionAt(outEdge);
                bool ok = true;
                PositionVector init = NBNode::bezierControlPoints(begShape, endShape, turnaround, 25, 25, ok, 0, straightThresh);
                if (init.size() == 0) {
                    length = fallBackShape.length2D();
                    // problem with turnarounds is known, method currently returns 'ok' (#2539)
                    if (!ok) {
                        WRITE_WARNING("Could not compute smooth shape from lane '" + inEdge->getLaneID(c.fromLane) + "' to lane '" + outEdge->getLaneID(c.toLane) + "'. Use option 'junctions.scurve-stretch' or increase radius of junction '" + inEdge->getToNode()->getID() + "' to fix this.");
                    }
                } else {
                    length = bezier(init, 12).length2D();
                }

                device.openTag("road");
                device.writeAttr("name", c.getInternalLaneID());
                device.setPrecision(8); // length requires higher precision
                device.writeAttr("length", MAX2(POSITION_EPS, length));
                device.setPrecision(OUTPUT_ACCURACY); 
                device.writeAttr("id", getID(c.getInternalLaneID(), edgeMap, edgeID));
                device.writeAttr("junction", getID(n->getID(), nodeMap, nodeID));
                device.openTag("link");
                device.openTag("predecessor");
                device.writeAttr("elementType", "road");
                device.writeAttr("elementId", getID(inEdge->getID(), edgeMap, edgeID));
                device.writeAttr("contactPoint", "end");
                device.closeTag();
                device.openTag("successor");
                device.writeAttr("elementType", "road");
                device.writeAttr("elementId", getID(outEdge->getID(), edgeMap, edgeID));
                device.writeAttr("contactPoint", "start");
                device.closeTag();
                device.closeTag();
                device.openTag("type").writeAttr("s", 0).writeAttr("type", "town").closeTag();
                device.openTag("planView");
                device.setPrecision(8); // geometry hdg requires higher precision
                OutputDevice_String elevationOSS(false, 3);
#ifdef DEBUG_SMOOTH_GEOM
                if (DEBUGCOND) {
                    std::cout << "write planview for internal edge " << c.getInternalLaneID() << " init=" << init << " fallback=" << fallBackShape << "\n";
                }
#endif
                if (init.size() == 0) {
                    writeGeomLines(fallBackShape, device, elevationOSS);
                } else {
                    writeGeomPP3(device, elevationOSS, init, length);
                }
                device.setPrecision(OUTPUT_ACCURACY);
                device.closeTag();
                writeElevationProfile(fallBackShape, device, elevationOSS);
                device << "        <lateralProfile/>\n";
                device << "        <lanes>\n";
                device << "            <laneSection s=\"0\">\n";
                writeEmptyCenterLane(device, "none", 0);
                device << "                <right>\n";
                device << "                    <lane id=\"-1\" type=\"" << getLaneType(outEdge->getPermissions(c.toLane)) << "\" level=\"true\">\n";
                device << "                        <link>\n";
                device << "                            <predecessor id=\"-" << inEdge->getNumLanes() - c.fromLane << "\"/>\n";
                device << "                            <successor id=\"-" << outEdge->getNumLanes() - c.toLane << "\"/>\n";
                device << "                        </link>\n";
                device << "                        <width sOffset=\"0\" a=\"" << width << "\" b=\"0\" c=\"0\" d=\"0\"/>\n";
                device << "                        <roadMark sOffset=\"0\" type=\"none\" weight=\"standard\" color=\"standard\" width=\"0.13\"/>\n";
                device << "                    </lane>\n";
                device << "                 </right>\n";
                device << "            </laneSection>\n";
                device << "        </lanes>\n";
                device << "        <objects/>\n";
                device << "        <signals/>\n";
                device.closeTag();
            }
        }
    }

    // write junctions (junction)
    for (std::map<std::string, NBNode*>::const_iterator i = nc.begin(); i != nc.end(); ++i) {
        NBNode* n = (*i).second;
        const std::vector<NBEdge*>& incoming = n->getIncomingEdges();
        // check if any connections must be written
        int numConnections = 0;
        for (std::vector<NBEdge*>::const_iterator j = incoming.begin(); j != incoming.end(); ++j) {
            numConnections += (int)((*j)->getConnections().size());
        }
        if (numConnections == 0) {
            continue;
        }
        device << "    <junction name=\"" << n->getID() << "\" id=\"" << getID(n->getID(), nodeMap, nodeID) << "\">\n";
        int index = 0;
        for (std::vector<NBEdge*>::const_iterator j = incoming.begin(); j != incoming.end(); ++j) {
            const NBEdge* inEdge = *j;
            const std::vector<NBEdge::Connection>& elv = inEdge->getConnections();
            for (std::vector<NBEdge::Connection>::const_iterator k = elv.begin(); k != elv.end(); ++k) {
                const NBEdge::Connection& c = *k;
                const NBEdge* outEdge = c.toEdge;
                if (outEdge == 0) {
                    continue;
                }
                device << "    <connection id=\""
                       << index << "\" incomingRoad=\"" << getID(inEdge->getID(), edgeMap, edgeID)
                       << "\" connectingRoad=\""
                       << getID(c.getInternalLaneID(), edgeMap, edgeID)
                       << "\" contactPoint=\"start\">\n";
                device << "        <laneLink from=\"-" << inEdge->getNumLanes() - c.fromLane
                       << "\" to=\"-1"  // every connection has its own edge
                       << "\"/>\n";
                device << "    </connection>\n";
                ++index;
            }
        }
        device << "    </junction>\n";
    }

    device.closeTag();
    device.close();
}