void Adafruit_TFTLCD::drawPixel(int16_t x, int16_t y, uint16_t color) {
// Clip
if((x < 0) || (y < 0) || (x >= _width) || (y >= _height)) return;
CS_ACTIVE;
if(driver == ID_932X) {
int16_t t;
switch(rotation) {
case 1:
t = x;
x = TFTWIDTH - 1 - y;
y = t;
break;
case 2:
x = TFTWIDTH - 1 - x;
y = TFTHEIGHT - 1 - y;
break;
case 3:
t = x;
x = y;
y = TFTHEIGHT - 1 - t;
break;
}
writeRegister16(0x0020, x);
writeRegister16(0x0021, y);
writeRegister16(0x0022, color);
} else if(driver == ID_7575) {
uint8_t hi, lo;
switch(rotation) {
default:
lo = 0 ;
break;
case 1 :
lo = 0x60;
break;
case 2 :
lo = 0xc0;
break;
case 3 :
lo = 0xa0;
break;
}
writeRegister8( HX8347G_MEMACCESS , lo);
// Only upper-left is set -- bottom-right is full screen default
writeRegisterPair(HX8347G_COLADDRSTART_HI, HX8347G_COLADDRSTART_LO, x);
writeRegisterPair(HX8347G_ROWADDRSTART_HI, HX8347G_ROWADDRSTART_LO, y);
hi = color >> 8;
lo = color;
CD_COMMAND;
write8(0x22);
CD_DATA;
write8(hi);
write8(lo);
}
// Unlike the 932X drivers that set the address window to the full screen
// by default (using the address counter for drawPixel operations), the
// 7575 needs the address window set on all graphics operations. In order
// to save a few register writes on each pixel drawn, the lower-right
// corner of the address window is reset after most fill operations, so
// that drawPixel only needs to change the upper left each time.
void Adafruit_TFTLCD::setLR(void) {
CS_ACTIVE;
writeRegisterPair(HX8347G_COLADDREND_HI, HX8347G_COLADDREND_LO, _width - 1);
writeRegisterPair(HX8347G_ROWADDREND_HI, HX8347G_ROWADDREND_LO, _height - 1);
CS_IDLE;
}
// Sets the LCD address window (and address counter, on 932X).
// Relevant to rect/screen fills and H/V lines. Input coordinates are
// assumed pre-sorted (e.g. x2 >= x1).
void Adafruit_TFTLCD::setAddrWindow(int x1, int y1, int x2, int y2) {
CS_ACTIVE;
if(driver == ID_932X) {
// Values passed are in current (possibly rotated) coordinate
// system. 932X requires hardware-native coords regardless of
// MADCTL, so rotate inputs as needed. The address counter is
// set to the top-left corner -- although fill operations can be
// done in any direction, the current screen rotation is applied
// because some users find it disconcerting when a fill does not
// occur top-to-bottom.
int x, y, t;
switch(rotation) {
default:
x = x1;
y = y1;
break;
case 1:
t = y1;
y1 = x1;
x1 = TFTWIDTH - 1 - y2;
y2 = x2;
x2 = TFTWIDTH - 1 - t;
x = x2;
y = y1;
break;
case 2:
t = x1;
x1 = TFTWIDTH - 1 - x2;
x2 = TFTWIDTH - 1 - t;
t = y1;
y1 = TFTHEIGHT - 1 - y2;
y2 = TFTHEIGHT - 1 - t;
x = x2;
y = y2;
break;
case 3:
t = x1;
x1 = y1;
y1 = TFTHEIGHT - 1 - x2;
x2 = y2;
y2 = TFTHEIGHT - 1 - t;
x = x1;
y = y2;
break;
}
writeRegister16(0x0050, x1); // Set address window
writeRegister16(0x0051, x2);
writeRegister16(0x0052, y1);
writeRegister16(0x0053, y2);
writeRegister16(0x0020, x ); // Set address counter to top left
writeRegister16(0x0021, y );
} else if(driver == ID_7575) {
writeRegisterPair(HX8347G_COLADDRSTART_HI, HX8347G_COLADDRSTART_LO, x1);
writeRegisterPair(HX8347G_ROWADDRSTART_HI, HX8347G_ROWADDRSTART_LO, y1);
writeRegisterPair(HX8347G_COLADDREND_HI , HX8347G_COLADDREND_LO , x2);
writeRegisterPair(HX8347G_ROWADDREND_HI , HX8347G_ROWADDREND_LO , y2);
} else if (driver == ID_9341) {
uint32_t t;
t = x1;
t <<= 16;
t |= x2;
writeRegister32(ILI9341_COLADDRSET, t);
t = y1;
t <<= 16;
t |= y2;
writeRegister32(ILI9341_PAGEADDRSET, t);
}
CS_IDLE;
}