void cpu_z80_init(void)
{
z80_init_memmap();
z80_map_fetch(0x0000, 0x7fff, memory.rom.cpu_z80.p);
z80_map_fetch(0x8000, 0xbfff, memory.rom.cpu_z80.p + 0x8000);
z80_map_fetch(0xc000, 0xdfff, memory.rom.cpu_z80.p + 0xc000);
z80_map_fetch(0xe000, 0xefff, memory.rom.cpu_z80.p + 0xe000);
z80_map_fetch(0xf000, 0xf7ff, memory.rom.cpu_z80.p + 0xf000);
z80_map_fetch(0xf800, 0xffff, memory.z80_ram);
z80_add_read(0x0000, 0x7fff, Z80_MAP_DIRECT, memory.rom.cpu_z80.p);
z80_map_read(0x8000, 0xbfff, memory.rom.cpu_z80.p + 0x8000);
z80_map_read(0xc000, 0xdfff, memory.rom.cpu_z80.p + 0xc000);
z80_map_read(0xe000, 0xefff, memory.rom.cpu_z80.p + 0xe000);
z80_map_read(0xf000, 0xf7ff, memory.rom.cpu_z80.p + 0xf000);
z80_add_read(0xf800, 0xffff, Z80_MAP_DIRECT, memory.z80_ram);
z80_bank[0]=0x8000;
z80_bank[1]=0xc000;
z80_bank[2]=0xe000;
z80_bank[3]=0xf000;
z80_add_write(0xf800, 0xffff, Z80_MAP_DIRECT, memory.z80_ram);
z80_end_memmap();
z80_set_in(z80_port_read);
z80_set_out(z80_port_write);
/* z80_set_fetch_callback(&debug);*/
cpu_z80_init_save_state();
z80_reset();
}
// RESET EMULATED MACHINE -----------------------------------------------------
void Machine_Reset (void)
{
int i;
static byte VDPInit [16] =
{
/* Values set by BIOS */
0x36, /*0xA0*/ 0x80 /* zero for Coleco */, 0xFF, 0xFF, 0xFF, 0xFF, 0xFB, 0x00,
0x00, 0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00
/* Old (guessed ?) values */
// 0x06, 0x00, 0x0E, 0xFF, 0xFF, 0x7F, 0x00, 0x00,
// 0x00, 0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00
};
#ifdef DEBUG_WHOLE
Msg (MSGT_DEBUG, "Machine_Reset();");
#endif
// Unpause machine if necessary
if (machine & MACHINE_PAUSED)
Machine_Pause ();
// Set driver & machine stuff
drv_set (cur_machine.driver_id);
Machine_Set_Mapper ();
if ((machine & MACHINE_RUN) != 0 /*== MACHINE_RUN */ && (cur_drv->id != DRV_NES))
Machine_Set_Mapping (); // ^^ FIXME: the test above isn't beautiful since MACHINE_RUN contains multiple flags, but I'm unsure which of them is actually needed to perform the correct test
Machine_Set_Handler_IO ();
Machine_Set_Handler_Read ();
Machine_Set_Handler_Write ();
Machine_Set_Handler_Loop ();
Machine_Set_Country ();
Machine_Set_IPeriod ();
Machine_Set_TV_Lines ();
// VDP MODEL --------------------------------------------------------------
if (DB_CurrentEntry && DB_CurrentEntry->emu_vdp_model != -1)
cur_machine.VDP.model = DB_CurrentEntry->emu_vdp_model;
else
{
if (cur_drv->id == DRV_GG)
cur_machine.VDP.model = VDP_MODEL_315_5378;
else
cur_machine.VDP.model = VDP_MODEL_315_5226;
}
// 3-D GLASSES ------------------------------------------------------------
sms.Glasses_Register = ((Glasses.Mode == GLASSES_MODE_SHOW_ONLY_LEFT) ? 1 : 0);
// CPU (MARAT FAIZULLIN'S CORE) -------------------------------------------
CPU_Loop_Stop = TRUE;
CPU_ForceNMI = FALSE;
#ifdef MARAT_Z80
sms.R.IPeriod = opt.Cur_IPeriod;
sms.R.Trace = FALSE;
ResetZ80 (&sms.R);
sms.R.IFF |= IFF_IM1;
sms.R.IAutoReset = FALSE;
sms.R.TrapBadOps = FALSE;
// CPU (MAME'S CORE) ------------------------------------------------------
#elif MAME_Z80
z80_reset (NULL);
z80_set_irq_callback (Get_IRQ_Vector);
z80_set_irq_line (0, ASSERT_LINE);
z80_set_irq_line (0, CLEAR_LINE);
// CPU (RICHARD MITTON'S CORE) --------------------------------------------
#elif RAZE_Z80
z80_init_memmap ();
z80_add_write (0x0000, 0xFFFF, Z80_MAP_HANDLED, WrZ80);
for (i = 0; i < 4; i ++)
{
z80_add_read ((i * 0x2000), (i * 0x2000) + 0x1FFF, Z80_MAP_DIRECT, Mem_Pages [i]);
z80_map_fetch ((i * 0x2000), (i * 0x2000) + 0x1FFF, Mem_Pages [i]);
}
for (i = 4; i < 8; i ++)
{
z80_map_fetch ((i * 0x2000), (i * 0x2000) + 0x1FFF, Mem_Pages [i]);
z80_map_read ((i * 0x2000), (i * 0x2000) + 0x1FFF, Mem_Pages [i]);
}
z80_set_in (InZ80);
z80_set_out (OutZ80);
z80_end_memmap ();
z80_reset ();
#endif
// MEMORY -----------------------------------------------------------------
memset (RAM, 0, 0x10000); // Clear all RAM
memset (VRAM, 0, 0x04000); // Clear all VRAM
PRAM = PRAM_Static;
memset (PRAM, 0, 0x00040); // Clear all PRAM (palette)
// Unload BIOS if...
if ((cur_drv->id != DRV_SMS || sms.Country != COUNTRY_EXPORT) && (machine & MACHINE_ROM_LOADED))
{
#ifdef DEBUG_WHOLE
Msg (MSGT_DEBUG, "Machine_Reset(): BIOS_Unload()");
#endif
BIOS_Unload ();
}
// GRAPHICS ---------------------------------------------------------------
for (i = 0; i < 16; i++)
Tms_VDP_Out (i, ((i == 1 && cur_drv->id == DRV_COLECO) ? 0x00 : VDPInit [i]));
for (i = 0; i < MAX_TILES; i++)
tgfx.Tile_Dirty [i] = TILE_DIRTY_DECODE | TILE_DIRTY_REDRAW;
VDP_UpdateLineLimits();
clear_bitmap (screenbuffer_1);
clear_bitmap (screenbuffer_2);
screenbuffer = screenbuffer_1;
screenbuffer_next = screenbuffer_2;
cur_machine.VDP.sprite_shift_x = 0;
cur_machine.VDP.scroll_x_latched = 0;
cur_machine.VDP.scroll_y_latched = 0;
memset(cur_machine.VDP.scroll_x_latched_table, 0, sizeof(cur_machine.VDP.scroll_x_latched_table));
tsms.VDP_Video_Change = VDP_VIDEO_CHANGE_ALL;
// GRAPHICS: SPRITE FLICKERING --------------------------------------------
if (g_Configuration.sprite_flickering & SPRITE_FLICKERING_AUTO)
{
if (DB_CurrentEntry && (DB_CurrentEntry->flags & DB_FLAG_EMU_SPRITE_FLICKER))
g_Configuration.sprite_flickering |= SPRITE_FLICKERING_ENABLED;
else
g_Configuration.sprite_flickering &= ~SPRITE_FLICKERING_ENABLED;
}
// PALETTE ----------------------------------------------------------------
//if (machine & MACHINE_POWER_ON)
Palette_Emulation_Reset();
// INPUT/OUTPUT/VDP -------------------------------------------------------
sms.VDP_Status = 0x00;
sms.VDP_Address = 0x0000;
sms.VDP_Access_Mode = VDP_Access_Mode_1;
sms.VDP_Access_First = 0x00;
sms.VDP_Pal = 0x00;
sms.VDP_ReadLatch = 0x00;
sms.Lines_Left = 255;
sms.Pending_HBlank = FALSE;
sms.Pending_NMI = FALSE;
tsms.VDP_Line = 0;
// CONTROLLERS ------------------------------------------------------------
for (i = 0; i < 8; i ++)
tsms.Control [i] = 0xFFFF; /* 0x3FFF */
tsms.Control_GG = /*0x20 | 0x80*/ 0;
tsms.Control_Start_Pause = 0;
tsms.Periph_Nat = 0;
sms.Input_Mode = 0x07;
// SOUND ------------------------------------------------------------------
sms.FM_Register = 0;
sms.FM_Magic = 0;
// if (fm_use == TRUE) fm_init (FM_ALL_INIT);
// resume_fm ();
FM_Reset ();
SN76489_Reset (cur_machine.TV->CPU_clock, audio_sample_rate);
if (Sound.LogVGM.Logging == VGM_LOGGING_ACCURACY_SAMPLE)
VGM_Update_Timing (&Sound.LogVGM);
// Reset sound cycle counter
Sound_Update_Count = 0;
Sound_CycleCounter = 0;
// FIXME: add a reset handler per driver, instead of the code below...
// GAME GEAR COMMUNICATION PORT
if (cur_machine.driver_id == DRV_GG)
{
Comm_Reset ();
}
// SF-7000
if (cur_machine.driver_id == DRV_SF7000)
{
SF7000_Reset ();
}
// NINTENDO CRAP
if (cur_machine.driver_id == DRV_NES /* && cfg.NES_Enabled */)
{
ROM = Game_ROM;
NES_Reset ();
}
// DEBUGGER ---------------------------------------------------------------
#ifdef MEKA_Z80_DEBUGGER
Debugger_MachineReset ();
#endif
}
// RESET EMULATED MACHINE -----------------------------------------------------
void Machine_Reset(void)
{
int i;
static byte VDPInit [16] =
{
/* Values set by BIOS */
0x36, /*0xA0*/ 0x80 /* zero for Coleco */, 0xFF, 0xFF, 0xFF, 0xFF, 0xFB, 0x00,
0x00, 0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00
/* Old (guessed ?) values */
// 0x06, 0x00, 0x0E, 0xFF, 0xFF, 0x7F, 0x00, 0x00,
// 0x00, 0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00
};
#ifdef DEBUG_WHOLE
Msg(MSGT_DEBUG, "Machine_Reset();");
#endif
// Unpause machine if necessary
if (g_machine_flags & MACHINE_PAUSED)
Machine_Pause();
// Set driver & machine stuff
drv_set (g_machine.driver_id);
Machine_Set_Mapper ();
if ((g_machine_flags & MACHINE_RUN) != 0 /*== MACHINE_RUN */)
Machine_Set_Mapping (); // ^^ FIXME: the test above isn't beautiful since MACHINE_RUN contains multiple flags, but I'm unsure which of them is actually needed to perform the correct test
Machine_Set_Handler_IO ();
Machine_Set_Handler_Read ();
Machine_Set_Handler_Write ();
Machine_Set_Handler_Loop ();
Machine_Set_Country ();
Machine_Set_IPeriod ();
Machine_Set_TV_Lines ();
// VDP MODEL --------------------------------------------------------------
if (DB.current_entry && DB.current_entry->emu_vdp_model != -1)
{
g_machine.VDP.model = DB.current_entry->emu_vdp_model;
}
else
{
if (g_driver->id == DRV_GG)
g_machine.VDP.model = VDP_MODEL_315_5378;
else
g_machine.VDP.model = VDP_MODEL_315_5226;
}
// 3-D GLASSES ------------------------------------------------------------
sms.Glasses_Register = ((Glasses.Mode == GLASSES_MODE_SHOW_ONLY_LEFT) ? 1 : 0);
if (Glasses.Mode == GLASSES_MODE_SHOW_ONLY_LEFT) {
sms.Glasses_Register = 1;
}
// CPU (MARAT FAIZULLIN'S CORE) -------------------------------------------
CPU_Loop_Stop = TRUE;
CPU_ForceNMI = FALSE;
#ifdef MARAT_Z80
sms.R.IPeriod = opt.Cur_IPeriod;
sms.R.Trace = FALSE;
ResetZ80 (&sms.R);
sms.R.IFF |= IFF_IM1;
sms.R.IAutoReset = FALSE;
sms.R.TrapBadOps = FALSE;
// CPU (MAME'S CORE) ------------------------------------------------------
#elif MAME_Z80
z80_reset (NULL);
z80_set_irq_callback (Get_IRQ_Vector);
z80_set_irq_line (0, ASSERT_LINE);
z80_set_irq_line (0, CLEAR_LINE);
// CPU (RICHARD MITTON'S CORE) --------------------------------------------
#elif RAZE_Z80
z80_init_memmap();
z80_add_write (0x0000, 0xFFFF, Z80_MAP_HANDLED, WrZ80);
for (i = 0; i < 4; i ++)
{
z80_add_read ((i * 0x2000), (i * 0x2000) + 0x1FFF, Z80_MAP_DIRECT, Mem_Pages [i]);
z80_map_fetch ((i * 0x2000), (i * 0x2000) + 0x1FFF, Mem_Pages [i]);
}
for (i = 4; i < 8; i ++)
{
z80_map_fetch ((i * 0x2000), (i * 0x2000) + 0x1FFF, Mem_Pages [i]);
z80_map_read ((i * 0x2000), (i * 0x2000) + 0x1FFF, Mem_Pages [i]);
}
z80_set_in (InZ80);
z80_set_out (OutZ80);
z80_end_memmap();
z80_reset();
#endif
// MEMORY -----------------------------------------------------------------
// Clear RAM
if (g_driver->id == DRV_SMS && sms.Country == COUNTRY_JAPAN)
{
// On Japanese SMS clear RAM with 0xF0 patterns
// I am not sure how reliable is that pattern but this is what I'm seeing on my JSMS
// In theory this should be applied to all drivers, all countries, etc. but the exact
// behavior of other systems and bioses should be inspected more in details before
// generalizing that.
// The game "Ali Baba" require a non-00 and non-FF memory pattern to run to a bug
// in the code which makes it execute uninitialized memory from 0xFF07 onward.
// An F0 pattern correspond to RET P which happens to fix the game.
memset (RAM, 0xF0, 0x10000);
}
else
{
memset (RAM, 0x00, 0x10000);
}
memset (VRAM, 0, 0x04000); // Clear all VRAM
memset (PRAM, 0, 0x00040); // Clear all PRAM (palette)
#ifdef DEBUG_UNINITIALIZED_RAM_ACCESSES
memset (RAM_IsUninitialized, 1, 0x2000);
#endif
// Unload BIOS if...
if ((g_driver->id != DRV_SMS || sms.Country != COUNTRY_EXPORT) && (g_machine_flags & MACHINE_ROM_LOADED))
{
#ifdef DEBUG_WHOLE
Msg(MSGT_DEBUG, "Machine_Reset(): BIOS_Unload()");
#endif
BIOS_Unload();
}
// GRAPHICS ---------------------------------------------------------------
for (i = 0; i < 16; i++)
Tms_VDP_Out (i, ((i == 1 && g_driver->id == DRV_COLECO) ? 0x00 : VDPInit [i]));
for (i = 0; i < MAX_TILES; i++)
tgfx.Tile_Dirty [i] = TILE_DIRTY_DECODE | TILE_DIRTY_REDRAW;
VDP_UpdateLineLimits();
//assert(!Screenbuffer_IsLocked());
al_set_target_bitmap(screenbuffer_1);
al_clear_to_color(COLOR_BLACK);
al_set_target_bitmap(screenbuffer_2);
al_clear_to_color(COLOR_BLACK);
//screenbuffer = screenbuffer_1;
//screenbuffer_next = screenbuffer_2;
g_machine.VDP.sprite_shift_x = 0;
g_machine.VDP.scroll_x_latched = 0;
g_machine.VDP.scroll_y_latched = 0;
memset(g_machine.VDP.scroll_x_latched_table, 0, sizeof(g_machine.VDP.scroll_x_latched_table));
tsms.VDP_Video_Change = VDP_VIDEO_CHANGE_ALL;
// GRAPHICS: SPRITE FLICKERING --------------------------------------------
if (g_configuration.sprite_flickering & SPRITE_FLICKERING_AUTO)
{
if (DB.current_entry && (DB.current_entry->flags & DB_FLAG_EMU_SPRITE_FLICKER))
g_configuration.sprite_flickering |= SPRITE_FLICKERING_ENABLED;
else
g_configuration.sprite_flickering &= ~SPRITE_FLICKERING_ENABLED;
}
// PALETTE ----------------------------------------------------------------
//if (machine & MACHINE_POWER_ON)
Palette_Emulation_Reset();
// INPUT/OUTPUT/VDP -------------------------------------------------------
sms.VDP_Status = 0x00;
sms.VDP_Address = 0x0000;
sms.VDP_Access_Mode = VDP_Access_Mode_1;
sms.VDP_Access_First = 0x00;
sms.VDP_Pal = 0x00;
sms.VDP_ReadLatch = 0x00;
sms.Lines_Left = 255;
sms.Pending_HBlank = FALSE;
sms.Pending_NMI = FALSE;
tsms.VDP_Line = 0;
// CONTROLLERS ------------------------------------------------------------
for (i = 0; i < 8; i ++)
tsms.Control [i] = 0xFFFF; /* 0x3FFF */
tsms.Control_GG = /*0x20 | 0x80*/ 0;
tsms.Control_Start_Pause = 0;
tsms.Port3F = 0;
sms.Input_Mode = 0x07;
// SOUND ------------------------------------------------------------------
sms.FM_Register = 0;
sms.FM_Magic = 0;
// if (fm_use == TRUE) fm_init (FM_ALL_INIT);
// resume_fm();
FM_Reset();
SN76489_Reset (g_machine.TV->CPU_clock, Sound.SampleRate);
if (Sound.LogVGM.Logging == VGM_LOGGING_ACCURACY_SAMPLE)
VGM_Update_Timing (&Sound.LogVGM);
Sound_ResetCycleCounter();
// FIXME: add a reset handler per driver, instead of the code below...
// GAME GEAR COMMUNICATION PORT
if (g_machine.driver_id == DRV_GG)
Comm_Reset();
// SF-7000
if (g_machine.driver_id == DRV_SF7000)
SF7000_Reset();
// DEBUGGER ---------------------------------------------------------------
#ifdef MEKA_Z80_DEBUGGER
Debugger_MachineReset();
#endif
}
