void _InitializePartition()
{
if (!fPrepared) {
if (fDevice->IsReadOnly())
printf("Device is read-only!\n");
else
printf("Sorry, not prepared for modifications!\n");
return;
}
// get the partition
int32 partitionIndex;
BPartition* partition = NULL;
if (!_SelectPartition("partition index [-1 to abort]: ", partition,
partitionIndex)) {
return;
}
printf("\nselected partition:\n\n");
print_partition_table_header();
print_partition(partition, 0, partitionIndex);
// get available disk systems
BObjectList<BDiskSystem> diskSystems(20, true);
BDiskDeviceRoster roster;
{
BDiskSystem diskSystem;
while (roster.GetNextDiskSystem(&diskSystem) == B_OK) {
if (partition->CanInitialize(diskSystem.PrettyName()))
diskSystems.AddItem(new BDiskSystem(diskSystem));
}
}
if (diskSystems.IsEmpty()) {
printf("There are no disk systems, that can initialize this "
"partition.\n");
return;
}
// print the available disk systems
printf("\ndisk systems that can initialize the selected partition:\n");
for (int32 i = 0; BDiskSystem* diskSystem = diskSystems.ItemAt(i); i++)
printf("%2ld %s\n", i, diskSystem->PrettyName());
printf("\n");
// get the disk system
int64 diskSystemIndex;
if (!_ReadNumber("disk system index [-1 to abort]: ", 0,
diskSystems.CountItems() - 1, -1, "invalid index",
diskSystemIndex)) {
return;
}
BDiskSystem* diskSystem = diskSystems.ItemAt(diskSystemIndex);
bool supportsName = diskSystem->SupportsContentName();
BString name;
BString parameters;
while (true) {
// let the user enter name and parameters
if (supportsName && !_ReadLine("partition name: ", name)
|| !_ReadLine("partition parameters: ", parameters)) {
return;
}
// validate parameters
BString validatedName(name);
if (partition->ValidateInitialize(diskSystem->PrettyName(),
supportsName ? &validatedName : NULL, parameters.String())
!= B_OK) {
printf("Validation of the given values failed. Sorry, can't "
"continue.\n");
return;
}
// did the disk system change the name?
if (!supportsName || name == validatedName) {
printf("Everything looks dandy.\n");
} else {
printf("The disk system adjusted the file name to \"%s\".\n",
validatedName.String());
name = validatedName;
}
// let the user decide whether to continue, change parameters, or
// abort
bool changeParameters = false;
while (true) {
BString line;
_ReadLine("[c]ontinue, change [p]arameters, or [a]bort? ", line);
if (line == "a")
return;
if (line == "p") {
changeParameters = true;
break;
}
if (line == "c")
break;
printf("invalid input\n");
}
if (!changeParameters)
break;
}
// initialize
status_t error = partition->Initialize(diskSystem->PrettyName(),
supportsName ? name.String() : NULL, parameters.String());
if (error != B_OK)
printf("Initialization failed: %s\n", strerror(error));
}
void
MainWindow::_Initialize(BDiskDevice* disk, partition_id selectedPartition,
const BString& diskSystemName)
{
if (!disk || selectedPartition < 0) {
_DisplayPartitionError(B_TRANSLATE("You need to select a partition "
"entry from the list."));
return;
}
if (disk->IsReadOnly()) {
_DisplayPartitionError(B_TRANSLATE("The selected disk is read-only."));
return;
}
BPartition* partition = disk->FindDescendant(selectedPartition);
if (!partition) {
_DisplayPartitionError(B_TRANSLATE("Unable to find the selected "
"partition by ID."));
return;
}
if (partition->IsMounted()) {
_DisplayPartitionError(
B_TRANSLATE("The partition %s is currently mounted."));
// TODO: option to unmount and continue on success to unmount
return;
}
BDiskSystem diskSystem;
fDDRoster.RewindDiskSystems();
bool found = false;
while (fDDRoster.GetNextDiskSystem(&diskSystem) == B_OK) {
if (diskSystem.SupportsInitializing()) {
if (diskSystemName == diskSystem.PrettyName()) {
found = true;
break;
}
}
}
char message[512];
if (!found) {
snprintf(message, sizeof(message), B_TRANSLATE("Disk system \"%s\"\" "
"not found!"));
_DisplayPartitionError(message);
return;
}
if (diskSystem.IsFileSystem()) {
if (disk->ID() == selectedPartition) {
snprintf(message, sizeof(message), B_TRANSLATE("Are you sure you "
"want to format a raw disk? (most people initialize the disk "
"with a partitioning system first) You will be asked "
"again before changes are written to the disk."));
} else if (partition->ContentName()
&& strlen(partition->ContentName()) > 0) {
snprintf(message, sizeof(message), B_TRANSLATE("Are you sure you "
"want to format the partition \"%s\"? You will be asked "
"again before changes are written to the disk."),
partition->ContentName());
} else {
snprintf(message, sizeof(message), B_TRANSLATE("Are you sure you "
"want to format the partition? You will be asked again "
"before changes are written to the disk."));
}
} else {
snprintf(message, sizeof(message), B_TRANSLATE("Are you sure you "
"want to initialize the selected disk? All data will be lost. "
"You will be asked again before changes are written to the "
"disk.\n"));
}
BAlert* alert = new BAlert("first notice", message,
B_TRANSLATE("Continue"), B_TRANSLATE("Cancel"), NULL,
B_WIDTH_FROM_WIDEST, B_WARNING_ALERT);
int32 choice = alert->Go();
if (choice == 1)
return;
ModificationPreparer modificationPreparer(disk);
status_t ret = modificationPreparer.ModificationStatus();
if (ret != B_OK) {
_DisplayPartitionError(B_TRANSLATE("There was an error preparing the "
"disk for modifications."), NULL, ret);
return;
}
BString name;
BString parameters;
// TODO: diskSystem.IsFileSystem() seems like a better fit here?
if (diskSystemName == "Be File System") {
InitParamsPanel* panel = new InitParamsPanel(this, diskSystemName,
partition);
if (panel->Go(name, parameters) == GO_CANCELED)
return;
} else if (diskSystemName == "Intel Partition Map") {
// TODO: parameters?
} else if (diskSystemName == "Intel Extended Partition") {
// TODO: parameters?
}
bool supportsName = diskSystem.SupportsContentName();
BString validatedName(name);
ret = partition->ValidateInitialize(diskSystem.PrettyName(),
supportsName ? &validatedName : NULL, parameters.String());
if (ret != B_OK) {
_DisplayPartitionError(B_TRANSLATE("Validation of the given "
"initialization parameters failed."), partition, ret);
return;
}
BString previousName = partition->ContentName();
ret = partition->Initialize(diskSystem.PrettyName(),
supportsName ? validatedName.String() : NULL, parameters.String());
if (ret != B_OK) {
_DisplayPartitionError(B_TRANSLATE("Initialization of the partition "
"%s failed. (Nothing has been written to disk.)"), partition, ret);
return;
}
// everything looks fine, we are ready to actually write the changes
// to disk
// Warn the user one more time...
if (previousName.Length() > 0) {
if (partition->IsDevice()) {
snprintf(message, sizeof(message), B_TRANSLATE("Are you sure you "
"want to write the changes back to disk now?\n\n"
"All data on the disk %s will be irretrievably lost if you "
"do so!"), previousName.String());
} else {
snprintf(message, sizeof(message), B_TRANSLATE("Are you sure you "
"want to write the changes back to disk now?\n\n"
"All data on the partition %s will be irretrievably lost if you "
"do so!"), previousName.String());
}
} else {
if (partition->IsDevice()) {
snprintf(message, sizeof(message), B_TRANSLATE("Are you sure you "
"want to write the changes back to disk now?\n\n"
"All data on the selected disk will be irretrievably lost if "
"you do so!"));
} else {
snprintf(message, sizeof(message), B_TRANSLATE("Are you sure you "
"want to write the changes back to disk now?\n\n"
"All data on the selected partition will be irretrievably lost "
"if you do so!"));
}
}
alert = new BAlert("final notice", message,
B_TRANSLATE("Write changes"), B_TRANSLATE("Cancel"), NULL,
B_WIDTH_FROM_WIDEST, B_WARNING_ALERT);
choice = alert->Go();
if (choice == 1)
return;
// commit
ret = modificationPreparer.CommitModifications();
// The partition pointer is toast now! Use the partition ID to
// retrieve it again.
partition = disk->FindDescendant(selectedPartition);
if (ret == B_OK) {
if (diskSystem.IsFileSystem()) {
_DisplayPartitionError(B_TRANSLATE("The partition %s has been "
"successfully formatted.\n"), partition);
} else {
_DisplayPartitionError(B_TRANSLATE("The disk has been "
"successfully initialized.\n"), partition);
}
} else {
if (diskSystem.IsFileSystem()) {
_DisplayPartitionError(B_TRANSLATE("Failed to format the "
"partition %s!\n"), partition, ret);
} else {
_DisplayPartitionError(B_TRANSLATE("Failed to initialize the "
"disk %s!\n"), partition, ret);
}
}
_ScanDrives();
}