CurvePoint::CurvePoint(const BLinePoint &bpoint)
{
p = bpoint.get_vertex();
l = p + bpoint.get_tangent1()*(1/3.0f);
r = p + bpoint.get_tangent2()*(1/3.0f);
}
ValueBase
synfig::ValueNode_Composite::operator()(Time t)const
{
if (getenv("SYNFIG_DEBUG_VALUENODE_OPERATORS"))
printf("%s:%d operator()\n", __FILE__, __LINE__);
Type &type(get_type());
if (type == type_vector)
{
Vector vect;
assert(components[0] && components[1]);
vect[0]=(*components[0])(t).get(Vector::value_type());
vect[1]=(*components[1])(t).get(Vector::value_type());
return vect;
}
else if (type == type_color)
{
Color color;
assert(components[0] && components[1] && components[2] && components[3]);
color.set_r((*components[0])(t).get(Vector::value_type()));
color.set_g((*components[1])(t).get(Vector::value_type()));
color.set_b((*components[2])(t).get(Vector::value_type()));
color.set_a((*components[3])(t).get(Vector::value_type()));
return color;
}
else if (type == type_segment)
{
Segment seg;
assert(components[0] && components[1] && components[2] && components[3]);
seg.p1=(*components[0])(t).get(Point());
seg.t1=(*components[1])(t).get(Vector());
seg.p2=(*components[2])(t).get(Point());
seg.t2=(*components[3])(t).get(Vector());
return seg;
}
else if (type == type_bline_point)
{
BLinePoint ret;
assert(components[0] && components[1] && components[2] && components[3] && components[4] && components[5] && components[6] && components[7]);
ret.set_vertex((*components[0])(t).get(Point()));
ret.set_width((*components[1])(t).get(Real()));
ret.set_origin((*components[2])(t).get(Real()));
ret.set_split_tangent_both((*components[3])(t).get(bool()));
ret.set_split_tangent_radius((*components[6])(t).get(bool()));
ret.set_split_tangent_angle((*components[7])(t).get(bool()));
ret.set_tangent1((*components[4])(t).get(Vector()));
ret.set_tangent2((*components[5])(t).get(Vector()));
return ret;
}
else if (type == type_width_point)
{
WidthPoint ret;
assert(components[0] && components[1] && components[2] && components[3] && components[4] && components[5]);
ret.set_position((*components[0])(t).get(Real()));
ret.set_width((*components[1])(t).get(Real()));
ret.set_side_type_before((*components[2])(t).get(int()));
ret.set_side_type_after((*components[3])(t).get(int()));
ret.set_lower_bound((*components[4])(t).get(Real()));
ret.set_upper_bound((*components[5])(t).get(Real()));
return ret;
}
else if (type == type_dash_item)
{
DashItem ret;
assert(components[0] && components[1] && components[2] && components[3]);
Real offset((*components[0])(t).get(Real()));
if(offset < 0.0) offset=0.0;
Real length((*components[1])(t).get(Real()));
if(length < 0.0) length=0.0;
ret.set_offset(offset);
ret.set_length(length);
ret.set_side_type_before((*components[2])(t).get(int()));
ret.set_side_type_after((*components[3])(t).get(int()));
return ret;
}
else if (type == type_transformation)
{
Transformation ret;
assert(components[0] && components[1] && components[2] && components[3]);
ret.offset = (*components[0])(t).get(Vector());
ret.angle = (*components[1])(t).get(Angle());
ret.skew_angle = (*components[2])(t).get(Angle());
ret.scale = (*components[3])(t).get(Vector());
return ret;
}
else if (dynamic_cast<types_namespace::TypeWeightedValueBase*>(&type) != NULL)
{
types_namespace::TypeWeightedValueBase *tp =
dynamic_cast<types_namespace::TypeWeightedValueBase*>(&type);
assert(components[0] && components[1]);
return tp->create_weighted_value((*components[0])(t).get(Real()), (*components[1])(t));
}
else if (dynamic_cast<types_namespace::TypePairBase*>(&type) != NULL)
{
types_namespace::TypePairBase *tp =
dynamic_cast<types_namespace::TypePairBase*>(&type);
assert(components[0] && components[1]);
return tp->create_value((*components[0])(t), (*components[1])(t));
}
synfig::error(string("ValueNode_Composite::operator():")+_("Bad type for composite"));
assert(components[0]);
return (*components[0])(t);
}
ValueBase
ValueNode_BLine::operator()(Time t)const
{
if (getenv("SYNFIG_DEBUG_VALUENODE_OPERATORS"))
printf("%s:%d operator()\n", __FILE__, __LINE__);
std::vector<BLinePoint> ret_list;
std::vector<ListEntry>::const_iterator iter,first_iter;
bool first_flag(true);
bool rising;
int index(0);
float next_scale(1.0f);
BLinePoint prev,first;
first.set_origin(100.0f);
// loop through all the list's entries
for(iter=list.begin();iter!=list.end();++iter,index++)
{
// how 'on' is this vertex?
float amount(iter->amount_at_time(t,&rising));
assert(amount>=0.0f);
assert(amount<=1.0f);
// it's fully on
if (amount > 1.0f - EPSILON)
{
if(first_flag)
{
first_iter=iter;
first=prev=(*iter->value_node)(t).get(prev);
first_flag=false;
ret_list.push_back(first);
continue;
}
BLinePoint curr;
curr=(*iter->value_node)(t).get(prev);
if(next_scale!=1.0f)
{
ret_list.back().set_split_tangent_flag(true);
ret_list.back().set_tangent2(prev.get_tangent2()*next_scale);
ret_list.push_back(curr);
ret_list.back().set_split_tangent_flag(true);
ret_list.back().set_tangent2(curr.get_tangent2());
ret_list.back().set_tangent1(curr.get_tangent1()*next_scale);
next_scale=1.0f;
}
else
{
ret_list.push_back(curr);
}
prev=curr;
}
// it's partly on
else if(amount>0.0f)
{
std::vector<ListEntry>::const_iterator begin_iter,end_iter;
// This is where the interesting stuff happens
// We need to seek forward in the list to see what the next
// active point is
BLinePoint blp_here_on; // the current vertex, when fully on
BLinePoint blp_here_off; // the current vertex, when fully off
BLinePoint blp_here_now; // the current vertex, right now (between on and off)
BLinePoint blp_prev_off; // the beginning of dynamic group when fully off
BLinePoint blp_next_off; // the end of the dynamic group when fully off
int dist_from_begin(0), dist_from_end(0);
Time off_time, on_time;
if(!rising) // if not rising, then we were fully on in the past, and will be fully off in the future
{
try{ on_time=iter->find_prev(t)->get_time(); }
catch(...) { on_time=Time::begin(); }
try{ off_time=iter->find_next(t)->get_time(); }
catch(...) { off_time=Time::end(); }
}
else // otherwise we were fully off in the past, and will be fully on in the future
{
try{ off_time=iter->find_prev(t)->get_time(); }
catch(...) { off_time=Time::begin(); }
try{ on_time=iter->find_next(t)->get_time(); }
catch(...) { on_time=Time::end(); }
}
blp_here_on=(*iter->value_node)(on_time).get(blp_here_on);
// blp_here_on=(*iter->value_node)(t).get(blp_here_on);
// Find "end" of dynamic group - ie. search forward along
// the bline from the current point until we find a point
// which is more 'on' than the current one
end_iter=iter;
// for(++end_iter;begin_iter!=list.end();++end_iter)
for(++end_iter;end_iter!=list.end();++end_iter)
if(end_iter->amount_at_time(t)>amount)
break;
// If we did not find an end of the dynamic group...
// Writeme! at least now it doesn't crash if first_iter
// isn't set yet
if(end_iter==list.end())
{
if(get_loop() && !first_flag)
end_iter=first_iter;
else
end_iter=--list.end();
}
blp_next_off=(*end_iter->value_node)(off_time).get(prev);
// Find "begin" of dynamic group
begin_iter=iter;
blp_prev_off.set_origin(100.0f); // set the origin to 100 (which is crazy) so that we can check to see if it was found
do
{
if(begin_iter==list.begin())
{
if(get_loop())
begin_iter=list.end();
else
break;
}
--begin_iter;
dist_from_begin++;
// if we've gone all around the loop, give up
if(begin_iter==iter)
break;
if(begin_iter->amount_at_time(t)>amount)
{
blp_prev_off=(*begin_iter->value_node)(off_time).get(prev);
break;
}
}while(true);
// If we did not find a begin
if(blp_prev_off.get_origin()==100.0f)
{
// Writeme! - this needs work, but at least now it
// doesn't crash
if(first_flag)
begin_iter=list.begin();
else
begin_iter=first_iter;
blp_prev_off=(*begin_iter->value_node)(off_time).get(prev);
}
// this is how the curve looks when we have completely vanished
etl::hermite<Vector> curve(blp_prev_off.get_vertex(), blp_next_off.get_vertex(),
blp_prev_off.get_tangent2(), blp_next_off.get_tangent1());
etl::derivative< etl::hermite<Vector> > deriv(curve);
// where would we be on this curve, how wide will we be, and
// where will our tangents point (all assuming that we hadn't vanished)
blp_here_off.set_vertex(curve(blp_here_on.get_origin()));
blp_here_off.set_width((blp_next_off.get_width()-blp_prev_off.get_width())*blp_here_on.get_origin()+blp_prev_off.get_width());
blp_here_off.set_tangent1(deriv(blp_here_on.get_origin()));
blp_here_off.set_tangent2(deriv(blp_here_on.get_origin()));
float prev_tangent_scalar(1.0f);
float next_tangent_scalar(1.0f);
//synfig::info("index_%d:dist_from_begin=%d",index,dist_from_begin);
//synfig::info("index_%d:dist_from_end=%d",index,dist_from_end);
// If we are the next to the begin
if(begin_iter==--std::vector<ListEntry>::const_iterator(iter) || dist_from_begin==1)
prev_tangent_scalar=linear_interpolation(blp_here_on.get_origin(), 1.0f, amount);
else
prev_tangent_scalar=linear_interpolation(blp_here_on.get_origin()-prev.get_origin(), 1.0f, amount);
// If we are the next to the end
if(end_iter==++std::vector<ListEntry>::const_iterator(iter) || dist_from_end==1)
next_tangent_scalar=linear_interpolation(1.0-blp_here_on.get_origin(), 1.0f, amount);
else if(list.end()!=++std::vector<ListEntry>::const_iterator(iter))
{
BLinePoint next;
next=((*(++std::vector<ListEntry>::const_iterator(iter))->value_node)(t).get(prev));
next_tangent_scalar=linear_interpolation(next.get_origin()-blp_here_on.get_origin(), 1.0f, amount);
}
else
//! \todo this isn't quite right; we should handle looped blines identically no matter where the loop happens
//! and we currently don't. this at least makes it a lot better than it was before
next_tangent_scalar=linear_interpolation(blp_next_off.get_origin()-blp_here_on.get_origin(), 1.0f, amount);
next_scale=next_tangent_scalar;
//blp_here_now.set_vertex(linear_interpolation(blp_here_off.get_vertex(), blp_here_on.get_vertex(), amount));
// if(false)
// {
// // My first try
// Point ref_point_begin(((*begin_iter->value_node)(off_time).get(prev).get_vertex() +
// (*end_iter->value_node)(off_time).get(prev).get_vertex()) * 0.5);
// Point ref_point_end(((*begin_iter->value_node)(on_time).get(prev).get_vertex() +
// (*end_iter->value_node)(on_time).get(prev).get_vertex()) * 0.5);
// Point ref_point_now(((*begin_iter->value_node)(t).get(prev).get_vertex() +
// (*end_iter->value_node)(t).get(prev).get_vertex()) * 0.5);
// Point ref_point_linear(linear_interpolation(ref_point_begin, ref_point_end, amount));
//
// blp_here_now.set_vertex(linear_interpolation(blp_here_off.get_vertex(), blp_here_on.get_vertex(), amount) +
// (ref_point_now-ref_point_linear));
// blp_here_now.set_tangent1(linear_interpolation(blp_here_off.get_tangent1(), blp_here_on.get_tangent1(), amount));
// blp_here_now.set_split_tangent_flag(blp_here_on.get_split_tangent_flag());
// if(blp_here_now.get_split_tangent_flag())
// blp_here_now.set_tangent2(linear_interpolation(blp_here_off.get_tangent2(), blp_here_on.get_tangent2(), amount));
// }
// else
{
// My second try
// define 3 coordinate systems:
Point off_coord_sys[2], off_coord_origin; // when the current vertex is completely off
Point on_coord_sys[2] , on_coord_origin; // when the current vertex is completely on
Point curr_coord_sys[2], curr_coord_origin; // the current state - somewhere in between
// for each of the 3 systems, the origin is half way between the previous and next active point
// and the axes are based on a vector from the next active point to the previous
{
const Point end_pos_at_off_time(( *end_iter->value_node)(off_time).get(prev).get_vertex());
const Point begin_pos_at_off_time((*begin_iter->value_node)(off_time).get(prev).get_vertex());
off_coord_origin=(begin_pos_at_off_time + end_pos_at_off_time)/2;
off_coord_sys[0]=(begin_pos_at_off_time - end_pos_at_off_time).norm();
off_coord_sys[1]=off_coord_sys[0].perp();
const Point end_pos_at_on_time(( *end_iter->value_node)(on_time).get(prev).get_vertex());
const Point begin_pos_at_on_time((*begin_iter->value_node)(on_time).get(prev).get_vertex());
on_coord_origin=(begin_pos_at_on_time + end_pos_at_on_time)/2;
on_coord_sys[0]=(begin_pos_at_on_time - end_pos_at_on_time).norm();
on_coord_sys[1]=on_coord_sys[0].perp();
const Point end_pos_at_current_time(( *end_iter->value_node)(t).get(prev).get_vertex());
const Point begin_pos_at_current_time((*begin_iter->value_node)(t).get(prev).get_vertex());
curr_coord_origin=(begin_pos_at_current_time + end_pos_at_current_time)/2;
curr_coord_sys[0]=(begin_pos_at_current_time - end_pos_at_current_time).norm();
curr_coord_sys[1]=curr_coord_sys[0].perp();
// Invert (transpose) the last of these matrices, since we use it for transform back
swap(curr_coord_sys[0][1],curr_coord_sys[1][0]);
}
/* The code that was here before used just end_iter as the origin, rather than the mid-point */
// We know our location and tangent(s) when fully on and fully off
// Transform each of these into their corresponding coordinate system
Point trans_on_point, trans_off_point;
Vector trans_on_t1, trans_on_t2, trans_off_t1, trans_off_t2;
transform_coords(blp_here_on.get_vertex(), trans_on_point, on_coord_origin, on_coord_sys);
transform_coords(blp_here_off.get_vertex(), trans_off_point, off_coord_origin, off_coord_sys);
#define COORD_SYS_RADIAL_TAN_INTERP 1
#ifdef COORD_SYS_RADIAL_TAN_INTERP
transform_coords(blp_here_on.get_tangent1(), trans_on_t1, Point::zero(), on_coord_sys);
transform_coords(blp_here_off.get_tangent1(), trans_off_t1, Point::zero(), off_coord_sys);
if(blp_here_on.get_split_tangent_flag())
{
transform_coords(blp_here_on.get_tangent2(), trans_on_t2, Point::zero(), on_coord_sys);
transform_coords(blp_here_off.get_tangent2(), trans_off_t2, Point::zero(), off_coord_sys);
}
#endif
{
// Interpolate between the 'on' point and the 'off' point and untransform to get our point's location
Point tmp;
untransform_coords(linear_interpolation(trans_off_point, trans_on_point, amount),
tmp, curr_coord_origin, curr_coord_sys);
blp_here_now.set_vertex(tmp);
}
#define INTERP_FUNCTION radial_interpolation
//#define INTERP_FUNCTION linear_interpolation
#ifdef COORD_SYS_RADIAL_TAN_INTERP
{
Vector tmp;
untransform_coords(INTERP_FUNCTION(trans_off_t1,trans_on_t1,amount), tmp, Point::zero(), curr_coord_sys);
blp_here_now.set_tangent1(tmp);
}
#else
blp_here_now.set_tangent1(radial_interpolation(blp_here_off.get_tangent1(),blp_here_on.get_tangent1(),amount));
#endif
if (blp_here_on.get_split_tangent_flag())
{
blp_here_now.set_split_tangent_flag(true);
#ifdef COORD_SYS_RADIAL_TAN_INTERP
{
Vector tmp;
untransform_coords(INTERP_FUNCTION(trans_off_t2,trans_on_t2,amount), tmp, Point::zero(), curr_coord_sys);
blp_here_now.set_tangent2(tmp);
}
#else
blp_here_now.set_tangent2(radial_interpolation(blp_here_off.get_tangent2(),blp_here_on.get_tangent2(),amount));
#endif
}
else
blp_here_now.set_split_tangent_flag(false);
}
blp_here_now.set_origin(blp_here_on.get_origin());
blp_here_now.set_width(linear_interpolation(blp_here_off.get_width(), blp_here_on.get_width(), amount));
// Handle the case where we are the first vertex
if(first_flag)
{
blp_here_now.set_tangent1(blp_here_now.get_tangent1()*prev_tangent_scalar);
first_iter=iter;
first=prev=blp_here_now;
first_flag=false;
ret_list.push_back(blp_here_now);
continue;
}
ret_list.back().set_split_tangent_flag(true);
ret_list.back().set_tangent2(prev.get_tangent2()*prev_tangent_scalar);
ret_list.push_back(blp_here_now);
ret_list.back().set_split_tangent_flag(true);
//ret_list.back().set_tangent2(blp_here_now.get_tangent1());
ret_list.back().set_tangent1(blp_here_now.get_tangent1()*prev_tangent_scalar);
prev=blp_here_now;
}
}
if(next_scale!=1.0f)
{
ret_list.back().set_split_tangent_flag(true);
ret_list.back().set_tangent2(prev.get_tangent2()*next_scale);
}
/*
if(get_loop() && !first_flag)
{
ret_list.push_back(
Segment(
prev.get_vertex(),
prev.get_tangent2(),
first.get_vertex(),
first.get_tangent1()
)
);
}
*/
if(list.empty())
synfig::warning(string("ValueNode_BLine::operator()():")+_("No entries in list"));
else
if(ret_list.empty())
synfig::warning(string("ValueNode_BLine::operator()():")+_("No entries in ret_list"));
return ValueBase(ret_list,get_loop());
}
