LPCTSTR CModemList::GetHash()
{
COcsCrypto myHash;
CModem myObject;
POSITION pos;
BOOL bContinue;
CString csToHash;
if (!myHash.HashInit())
return NULL;
pos = GetHeadPosition();
bContinue = (pos != NULL);
if (bContinue)
// There is one record => get the first
myObject = GetNext( pos);
while (bContinue)
{
csToHash.Format( _T( "%s%s%s%s"), myObject.GetName(), myObject.GetModel(),
myObject.GetDescription(), myObject.GetType());
myHash.HashUpdate( LPCTSTR( csToHash), csToHash.GetLength());
bContinue = (pos != NULL);
if (bContinue)
myObject = GetNext( pos);
}
return myHash.HashFinal();
}
bool CDStarRepeaterD::createThread()
{
CDStarRepeaterConfig config(m_confDir, CONFIG_FILE_NAME, m_name);
wxString callsign, gateway;
DSTAR_MODE mode;
ACK_TYPE ack;
bool restriction, rpt1Validation, dtmfBlanking, errorReply;
config.getCallsign(callsign, gateway, mode, ack, restriction, rpt1Validation, dtmfBlanking, errorReply);
wxString modemType;
config.getModem(modemType);
// DVAP can only do simplex, force the mode accordingly
if (modemType.IsSameAs(wxT("DVAP"))) {
if (mode == MODE_DUPLEX) {
wxLogInfo(wxT("DVAP: changing mode from DUPLEX to SIMPLEX"));
mode = MODE_SIMPLEX;
} else if (mode == MODE_TXANDRX) {
wxLogInfo(wxT("DVAP: changing mode from TX_AND_RX to RX_ONLY"));
mode = MODE_RXONLY;
}
}
switch (mode) {
case MODE_RXONLY:
m_thread = new CDStarRepeaterRXThread(modemType);
break;
case MODE_TXONLY:
m_thread = new CDStarRepeaterTXThread(modemType);
break;
case MODE_TXANDRX:
m_thread = new CDStarRepeaterTXRXThread(modemType);
break;
default:
m_thread = new CDStarRepeaterTRXThread(modemType);
break;
}
m_thread->setCallsign(callsign, gateway, mode, ack, restriction, rpt1Validation, dtmfBlanking, errorReply);
wxLogInfo(wxT("Callsign set to \"%s\", gateway set to \"%s\", mode: %d, ack: %d, restriction: %d, RPT1 validation: %d, DTMF blanking: %d, Error reply: %d"), callsign.c_str(), gateway.c_str(), int(mode), int(ack), int(restriction), int(rpt1Validation), int(dtmfBlanking), int(errorReply));
wxString gatewayAddress, localAddress, name;
unsigned int gatewayPort, localPort;
config.getNetwork(gatewayAddress, gatewayPort, localAddress, localPort, name);
wxLogInfo(wxT("Gateway set to %s:%u, local set to %s:%u, name set to \"%s\""), gatewayAddress.c_str(), gatewayPort, localAddress.c_str(), localPort, name.c_str());
if (!gatewayAddress.IsEmpty()) {
bool local = gatewayAddress.IsSameAs(wxT("127.0.0.1"));
CRepeaterProtocolHandler* handler = new CRepeaterProtocolHandler(gatewayAddress, gatewayPort, localAddress, localPort, name);
bool res = handler->open();
if (!res) {
wxLogError(wxT("Cannot open the protocol handler"));
return false;
}
m_thread->setProtocolHandler(handler, local);
}
unsigned int timeout, ackTime;
config.getTimes(timeout, ackTime);
m_thread->setTimes(timeout, ackTime);
wxLogInfo(wxT("Timeout set to %u secs, ack time set to %u ms"), timeout, ackTime);
unsigned int beaconTime;
wxString beaconText;
bool beaconVoice;
TEXT_LANG language;
config.getBeacon(beaconTime, beaconText, beaconVoice, language);
if (mode == MODE_GATEWAY)
beaconTime = 0U;
m_thread->setBeacon(beaconTime, beaconText, beaconVoice, language);
wxLogInfo(wxT("Beacon set to %u mins, text set to \"%s\", voice set to %d, language set to %d"), beaconTime / 60U, beaconText.c_str(), int(beaconVoice), int(language));
bool announcementEnabled;
unsigned int announcementTime;
wxString announcementRecordRPT1, announcementRecordRPT2;
wxString announcementDeleteRPT1, announcementDeleteRPT2;
config.getAnnouncement(announcementEnabled, announcementTime, announcementRecordRPT1, announcementRecordRPT2, announcementDeleteRPT1, announcementDeleteRPT2);
if (mode == MODE_GATEWAY)
announcementEnabled = false;
m_thread->setAnnouncement(announcementEnabled, announcementTime, announcementRecordRPT1, announcementRecordRPT2, announcementDeleteRPT1, announcementDeleteRPT2);
wxLogInfo(wxT("Announcement enabled: %d, time: %u mins, record RPT1: \"%s\", record RPT2: \"%s\", delete RPT1: \"%s\", delete RPT2: \"%s\""), int(announcementEnabled), announcementTime / 60U, announcementRecordRPT1.c_str(), announcementRecordRPT2.c_str(), announcementDeleteRPT1.c_str(), announcementDeleteRPT2.c_str());
wxLogInfo(wxT("Modem type set to \"%s\""), modemType.c_str());
CModem* modem = NULL;
if (modemType.IsSameAs(wxT("DVAP"))) {
wxString port;
unsigned int frequency;
int power, squelch;
config.getDVAP(port, frequency, power, squelch);
wxLogInfo(wxT("DVAP: port: %s, frequency: %u Hz, power: %d dBm, squelch: %d dBm"), port.c_str(), frequency, power, squelch);
modem = new CDVAPController(port, frequency, power, squelch);
} else if (modemType.IsSameAs(wxT("DV-RPTR V1"))) {
wxString port;
bool rxInvert, txInvert, channel;
unsigned int modLevel, txDelay;
config.getDVRPTR1(port, rxInvert, txInvert, channel, modLevel, txDelay);
wxLogInfo(wxT("DV-RPTR V1, port: %s, RX invert: %d, TX invert: %d, channel: %s, mod level: %u%%, TX delay: %u ms"), port.c_str(), int(rxInvert), int(txInvert), channel ? wxT("B") : wxT("A"), modLevel, txDelay);
modem = new CDVRPTRV1Controller(port, wxEmptyString, rxInvert, txInvert, channel, modLevel, txDelay);
} else if (modemType.IsSameAs(wxT("DV-RPTR V2"))) {
CONNECTION_TYPE connType;
wxString usbPort, address;
bool txInvert;
unsigned int port, modLevel, txDelay;
config.getDVRPTR2(connType, usbPort, address, port, txInvert, modLevel, txDelay);
wxLogInfo(wxT("DV-RPTR V2, type: %d, address: %s:%u, TX invert: %d, mod level: %u%%, TX delay: %u ms"), int(connType), address.c_str(), port, int(txInvert), modLevel, txDelay);
switch (connType) {
case CT_USB:
modem = new CDVRPTRV2Controller(usbPort, wxEmptyString, txInvert, modLevel, mode == MODE_DUPLEX || mode == MODE_TXANDRX, callsign, txDelay);
break;
case CT_NETWORK:
modem = new CDVRPTRV2Controller(address, port, txInvert, modLevel, mode == MODE_DUPLEX || mode == MODE_TXANDRX, callsign, txDelay);
break;
}
} else if (modemType.IsSameAs(wxT("DV-RPTR V3"))) {
CONNECTION_TYPE connType;
wxString usbPort, address;
bool txInvert;
unsigned int port, modLevel, txDelay;
config.getDVRPTR3(connType, usbPort, address, port, txInvert, modLevel, txDelay);
wxLogInfo(wxT("DV-RPTR V3, type: %d, address: %s:%u, TX invert: %d, mod level: %u%%, TX delay: %u ms"), int(connType), address.c_str(), port, int(txInvert), modLevel, txDelay);
switch (connType) {
case CT_USB:
modem = new CDVRPTRV3Controller(usbPort, wxEmptyString, txInvert, modLevel, mode == MODE_DUPLEX || mode == MODE_TXANDRX, callsign, txDelay);
break;
case CT_NETWORK:
modem = new CDVRPTRV3Controller(address, port, txInvert, modLevel, mode == MODE_DUPLEX || mode == MODE_TXANDRX, callsign, txDelay);
break;
}
} else if (modemType.IsSameAs(wxT("DVMEGA"))) {
wxString port;
DVMEGA_VARIANT variant;
bool rxInvert, txInvert;
unsigned int txDelay, rxFrequency, txFrequency, power;
config.getDVMEGA(port, variant, rxInvert, txInvert, txDelay, rxFrequency, txFrequency, power);
wxLogInfo(wxT("DVMEGA, port: %s, variant: %d, RX invert: %d, TX invert: %d, TX delay: %u ms, rx frequency: %u Hz, tx frequency: %u Hz, power: %u %%"), port.c_str(), int(variant), int(rxInvert), int(txInvert), txDelay, rxFrequency, txFrequency, power);
switch (variant) {
case DVMV_MODEM:
modem = new CDVMegaController(port, wxEmptyString, rxInvert, txInvert, txDelay);
break;
case DVMV_RADIO_2M:
case DVMV_RADIO_70CM:
case DVMV_RADIO_2M_70CM:
modem = new CDVMegaController(port, wxEmptyString, txDelay, rxFrequency, txFrequency, power);
break;
default:
wxLogError(wxT("Unknown DVMEGA variant - %d"), int(variant));
break;
}
} else if (modemType.IsSameAs(wxT("GMSK Modem"))) {
USB_INTERFACE iface;
unsigned int address;
config.getGMSK(iface, address);
wxLogInfo(wxT("GMSK, interface: %d, address: %04X"), int(iface), address);
modem = new CGMSKController(iface, address, mode == MODE_DUPLEX || mode == MODE_TXANDRX);
} else if (modemType.IsSameAs(wxT("Sound Card"))) {
wxString rxDevice, txDevice;
bool rxInvert, txInvert;
wxFloat32 rxLevel, txLevel;
unsigned int txDelay, txTail;
config.getSoundCard(rxDevice, txDevice, rxInvert, txInvert, rxLevel, txLevel, txDelay, txTail);
wxLogInfo(wxT("Sound Card, devices: %s:%s, invert: %d:%d, levels: %.2f:%.2f, tx delay: %u ms, tx tail: %u ms"), rxDevice.c_str(), txDevice.c_str(), int(rxInvert), int(txInvert), rxLevel, txLevel, txDelay, txTail);
modem = new CSoundCardController(rxDevice, txDevice, rxInvert, txInvert, rxLevel, txLevel, txDelay, txTail);
} else if (modemType.IsSameAs(wxT("MMDVM"))) {
wxString port;
bool rxInvert, txInvert, pttInvert;
unsigned int txDelay, rxLevel, txLevel;
config.getMMDVM(port, rxInvert, txInvert, pttInvert, txDelay, rxLevel, txLevel);
wxLogInfo(wxT("MMDVM, port: %s, RX invert: %d, TX invert: %d, PTT invert: %d, TX delay: %u ms, RX level: %u%%, TX level: %u%%"), port.c_str(), int(rxInvert), int(txInvert), int(pttInvert), txDelay, rxLevel, txLevel);
modem = new CMMDVMController(port, wxEmptyString, rxInvert, txInvert, pttInvert, txDelay, rxLevel, txLevel);
} else if (modemType.IsSameAs(wxT("Split"))) {
wxString localAddress;
unsigned int localPort;
wxArrayString transmitterNames, receiverNames;
unsigned int timeout;
config.getSplit(localAddress, localPort, transmitterNames, receiverNames, timeout);
wxLogInfo(wxT("Split, local: %s:%u, timeout: %u ms"), localAddress.c_str(), localPort, timeout);
for (unsigned int i = 0U; i < transmitterNames.GetCount(); i++) {
wxString name = transmitterNames.Item(i);
if (!name.IsEmpty())
wxLogInfo(wxT("\tTX %u name: %s"), i + 1U, name.c_str());
}
for (unsigned int i = 0U; i < receiverNames.GetCount(); i++) {
wxString name = receiverNames.Item(i);
if (!name.IsEmpty())
wxLogInfo(wxT("\tRX %u name: %s"), i + 1U, name.c_str());
}
modem = new CSplitController(localAddress, localPort, transmitterNames, receiverNames, timeout);
} else {
wxLogError(wxT("Unknown modem type: %s"), modemType.c_str());
}
if (modem != NULL) {
bool res = modem->start();
if (!res)
wxLogError(wxT("Cannot open the D-Star modem"));
else
m_thread->setModem(modem);
}
wxString controllerType;
unsigned int portConfig, activeHangTime;
bool pttInvert;
config.getController(controllerType, portConfig, pttInvert, activeHangTime);
wxLogInfo(wxT("Controller set to %s, config: %u, PTT invert: %d, active hang time: %u ms"), controllerType.c_str(), portConfig, int(pttInvert), activeHangTime);
CExternalController* controller = NULL;
wxString port;
if (controllerType.StartsWith(wxT("Velleman K8055 - "), &port)) {
unsigned long num;
port.ToULong(&num);
controller = new CExternalController(new CK8055Controller(num), pttInvert);
} else if (controllerType.StartsWith(wxT("Serial - "), &port)) {
controller = new CExternalController(new CSerialLineController(port, portConfig), pttInvert);
} else if (controllerType.StartsWith(wxT("Arduino - "), &port)) {
controller = new CExternalController(new CArduinoController(port), pttInvert);
#if defined(GPIO)
} else if (controllerType.IsSameAs(wxT("GPIO"))) {
controller = new CExternalController(new CGPIOController(portConfig), pttInvert);
#endif
} else {
controller = new CExternalController(new CDummyController, pttInvert);
}
bool res = controller->open();
if (!res)
wxLogError(wxT("Cannot open the hardware interface - %s"), controllerType.c_str());
else
m_thread->setController(controller, activeHangTime);
bool out1, out2, out3, out4;
config.getOutputs(out1, out2, out3, out4);
m_thread->setOutputs(out1, out2, out3, out4);
wxLogInfo(wxT("Output 1 = %d, output 2 = %d, output 3 = %d, output 4 = %d"), out1, out2, out3, out4);
bool enabled;
wxString rpt1Callsign, rpt2Callsign;
wxString shutdown, startup;
wxString status1, status2, status3, status4, status5;
wxString command1, command1Line, command2, command2Line;
wxString command3, command3Line, command4, command4Line;
wxString command5, command5Line, command6, command6Line;
wxString output1, output2, output3, output4;
config.getControl(enabled, rpt1Callsign, rpt2Callsign, shutdown, startup, status1, status2, status3, status4, status5, command1, command1Line, command2, command2Line, command3, command3Line, command4, command4Line, command5, command5Line, command6, command6Line, output1, output2, output3, output4);
m_thread->setControl(enabled, rpt1Callsign, rpt2Callsign, shutdown, startup, status1, status2, status3, status4, status5, command1, command1Line, command2, command2Line, command3, command3Line, command4, command4Line, command5, command5Line, command6, command6Line, output1, output2, output3, output4);
wxLogInfo(wxT("Control: enabled: %d, RPT1: %s, RPT2: %s, shutdown: %s, startup: %s, status1: %s, status2: %s, status3: %s, status4: %s, status5: %s, command1: %s = %s, command2: %s = %s, command3: %s = %s, command4: %s = %s, command5: %s = %s, command6: %s = %s, output1: %s, output2: %s, output3: %s, output4: %s"), enabled, rpt1Callsign.c_str(), rpt2Callsign.c_str(), shutdown.c_str(), startup.c_str(), status1.c_str(), status2.c_str(), status3.c_str(), status4.c_str(), status5.c_str(), command1.c_str(), command1Line.c_str(), command2.c_str(), command2Line.c_str(), command3.c_str(), command3Line.c_str(), command4.c_str(), command4Line.c_str(), command5.c_str(), command5Line.c_str(), command6.c_str(), command6Line.c_str(), output1.c_str(), output2.c_str(), output3.c_str(), output4.c_str());
bool logging;
config.getLogging(logging);
m_thread->setLogging(logging, m_audioDir);
wxLogInfo(wxT("Frame logging set to %d, in %s"), int(logging), m_audioDir.c_str());
wxFileName wlFilename(wxFileName::GetHomeDir(), WHITELIST_FILE_NAME);
bool exists = wlFilename.FileExists();
if (exists) {
CCallsignList* list = new CCallsignList(wlFilename.GetFullPath());
bool res = list->load();
if (!res) {
wxLogError(wxT("Unable to open white list file - %s"), wlFilename.GetFullPath().c_str());
delete list;
} else {
wxLogInfo(wxT("%u callsigns loaded into the white list"), list->getCount());
m_thread->setWhiteList(list);
}
}
wxFileName blFilename(wxFileName::GetHomeDir(), BLACKLIST_FILE_NAME);
exists = blFilename.FileExists();
if (exists) {
CCallsignList* list = new CCallsignList(blFilename.GetFullPath());
bool res = list->load();
if (!res) {
wxLogError(wxT("Unable to open black list file - %s"), blFilename.GetFullPath().c_str());
delete list;
} else {
wxLogInfo(wxT("%u callsigns loaded into the black list"), list->getCount());
m_thread->setBlackList(list);
}
}
wxFileName glFilename(wxFileName::GetHomeDir(), GREYLIST_FILE_NAME);
exists = glFilename.FileExists();
if (exists) {
CCallsignList* list = new CCallsignList(glFilename.GetFullPath());
bool res = list->load();
if (!res) {
wxLogError(wxT("Unable to open grey list file - %s"), glFilename.GetFullPath().c_str());
delete list;
} else {
wxLogInfo(wxT("%u callsigns loaded into the grey list"), list->getCount());
m_thread->setGreyList(list);
}
}
return true;
}
void CSearchingDialog::ProcessFindSpeed(void)
{
CString csFormat;
CString csStatus;
StopTimer(); // No more timers while we're in here.
static long lSpeeds[] =
{
1200L,
2400L,
// 4800L,
// 9600L,
0L
};
/*
// Look through the ports.
*/
CModem Modem;
m_pModem = &Modem; // Allow user to cancel
Modem.WaitForOk(1000, "OK");
int nResult = Modem.Init(m_nPort, 1200L); // Be able to talk to all modems we support.
m_lSpeed = 0; // No speed found yet.
if (m_State == Cancelled || m_nPort == -1)
{
nResult = GCPP_USER_ABORT;
}
if (nResult == GCPP_OK)
{
Modem.WaitForOk(1000, "OK");
long lSpeed;
for (int nSpeedIndex = 0; (lSpeed = lSpeeds[nSpeedIndex]) != 0L; nSpeedIndex++)
{
Modem.GetPort()->SetBaud(lSpeed);
Util::SafeLoadString(IDS_TESTING_COMMUNICATIONS_PORT, csFormat);
csStatus.Format(csFormat, m_nPort, lSpeed);
ShowStatus(csStatus);
for (int nTry = 0; nTry < MaxOkAttempts; nTry++)
{
TRACE("Speed %ld: Try write #%d...\n", lSpeed, nTry);
Modem.GetPort()->RXFlush();
nResult = Modem.Write("E1V1Q0", 1);
if (m_State == Cancelled || m_nPort == -1)
{
nResult = GCPP_USER_ABORT;
}
if (nResult == GCPP_OK)
{
m_lSpeed = lSpeed; // This one tested OK!
break;
}
if (nResult == GCPP_USER_ABORT)
{
break;
}
}
if (m_lSpeed != lSpeed)
{
/* The last one failed. Break out now. */
break;
}
// Go to next speed.
}
}
m_pModem = NULL;
// TRACE("Done with result %d (%d)\n", nResult, m_State);
if (nResult == GCPP_USER_ABORT || m_State == Cancelled)
{
// User abort. Just return.
return;
}
else if (m_lSpeed == 0L)
{
Util::SafeLoadString(IDS_CANT_DETERMINE_MODEM_SPEED, csStatus);
ShowStatus(csStatus);
SetState(Failed);
}
else
{
Util::SafeLoadString(IDS_FOUND_MODEM_SPEED, csFormat);
csStatus.Format(csFormat, m_nPort, m_lSpeed);
ShowStatus(csStatus);
SetState(Succeeded);
}
}
void CSearchingDialog::ProcessFindModem(void)
{
CString csFormat;
CString csStatus;
StopTimer(); // No more timers while we're in here.
/*
// Look through the ports.
*/
for (m_nPort = 1; m_nPort < LastPort; m_nPort++)
{
CModem Modem;
m_pModem = &Modem; // Allow user to cancel
Modem.WaitForOk(1000, "OK");
int nResult = Modem.Init(m_nPort, 1200); // Be able to talk to all modems we support.
if (m_State == Cancelled || m_nPort == -1)
{
nResult = GCPP_USER_ABORT;
}
if (nResult == GCPP_OK)
{
Util::SafeLoadString(IDS_TRYING_COMMUNICATIONS_PORT, csFormat);
csStatus.Format(csFormat, m_nPort);
ShowStatus(csStatus);
Modem.WaitForOk(1000, "OK");
for (int nTry = 0; nTry < MaxOkAttempts; nTry++)
{
TRACE("Try write #%d...\n", nTry);
Modem.GetPort()->RXFlush();
nResult = Modem.Write("E1V1Q0", 1);
if (m_State == Cancelled || m_nPort == -1)
{
nResult = GCPP_USER_ABORT;
}
if (nResult == GCPP_OK)
{
m_pModem = NULL;
/* State that we are searching for the port. */
Util::SafeLoadString(IDS_FOUND_MODEM, csFormat);
csStatus.Format(csFormat, m_nPort);
ShowStatus(csStatus);
SetState(FindSpeed);
return;
}
TRACE("nResult == %d (%d)\n", nResult, m_nPort);
if (nResult == GCPP_USER_ABORT)
{
nResult = GCPP_USER_ABORT;
break;
}
}
}
m_pModem = NULL;
if (nResult == GCPP_USER_ABORT || m_State == Cancelled)
{
return;
}
// Go to next port.
}
Util::SafeLoadString(IDS_CANT_FIND_MODEM, csStatus);
ShowStatus(csStatus);
SetState(Failed);
}
void CDStarRepeaterApp::createThread()
{
wxASSERT(m_config != NULL);
wxString callsign, gateway;
DSTAR_MODE mode;
ACK_TYPE ack;
bool restriction, rpt1Validation, dtmfBlanking, errorReply;
m_config->getCallsign(callsign, gateway, mode, ack, restriction, rpt1Validation, dtmfBlanking, errorReply);
wxString modemType;
m_config->getModem(modemType);
// DVAP can only do simplex, force the mode accordingly
if (modemType.IsSameAs("DVAP")) {
if (mode == MODE_DUPLEX) {
wxLogInfo("DVAP: changing mode from DUPLEX to SIMPLEX");
mode = MODE_SIMPLEX;
} else if (mode == MODE_TXANDRX) {
wxLogInfo("DVAP: changing mode from TX_AND_RX to RX_ONLY");
mode = MODE_RXONLY;
}
}
// XXX This should be m_thread eventually.
switch (mode) {
case MODE_RXONLY:
m_thread = new CDStarRepeaterRXThread(modemType);
break;
case MODE_TXONLY:
m_thread = new CDStarRepeaterTXThread(modemType);
break;
case MODE_TXANDRX:
m_thread = new CDStarRepeaterTXRXThread(modemType);
break;
default:
m_thread = new CDStarRepeaterTRXThread(modemType);
break;
}
m_thread->setCallsign(callsign, gateway, mode, ack, restriction, rpt1Validation, dtmfBlanking, errorReply);
wxLogInfo("Callsign set to \"%s\", gateway set to \"%s\", mode: %d, ack: %d, restriction: %d, RPT1 validation: %d, DTMF blanking: %d, Error reply: %d", callsign.c_str(), gateway.c_str(), int(mode), int(ack), int(restriction), int(rpt1Validation), int(dtmfBlanking), int(errorReply));
wxString gatewayAddress, localAddress, name;
unsigned int gatewayPort, localPort;
m_config->getNetwork(gatewayAddress, gatewayPort, localAddress, localPort, name);
wxLogInfo("Gateway set to %s:%u, local set to %s:%u, name set to \"%s\"", gatewayAddress.c_str(), gatewayPort, localAddress.c_str(), localPort, name.c_str());
if (!gatewayAddress.IsEmpty()) {
bool local = gatewayAddress.IsSameAs("127.0.0.1");
CRepeaterProtocolHandler* handler = new CRepeaterProtocolHandler(gatewayAddress, gatewayPort, localAddress, localPort, name);
bool res = handler->open();
if (!res)
wxLogError("Cannot open the protocol handler");
else
m_thread->setProtocolHandler(handler, local);
}
unsigned int timeout, ackTime;
m_config->getTimes(timeout, ackTime);
m_thread->setTimes(timeout, ackTime);
wxLogInfo("Timeout set to %u secs, ack time set to %u ms", timeout, ackTime);
unsigned int beaconTime;
wxString beaconText;
bool beaconVoice;
TEXT_LANG language;
m_config->getBeacon(beaconTime, beaconText, beaconVoice, language);
if (mode == MODE_GATEWAY)
beaconTime = 0U;
m_thread->setBeacon(beaconTime, beaconText, beaconVoice, language);
wxLogInfo("Beacon set to %u mins, text set to \"%s\", voice set to %d, language set to %d", beaconTime / 60U, beaconText.c_str(), int(beaconVoice), int(language));
bool announcementEnabled;
unsigned int announcementTime;
wxString announcementRecordRPT1, announcementRecordRPT2;
wxString announcementDeleteRPT1, announcementDeleteRPT2;
m_config->getAnnouncement(announcementEnabled, announcementTime, announcementRecordRPT1, announcementRecordRPT2, announcementDeleteRPT1, announcementDeleteRPT2);
if (mode == MODE_GATEWAY)
announcementEnabled = false;
m_thread->setAnnouncement(announcementEnabled, announcementTime, announcementRecordRPT1, announcementRecordRPT2, announcementDeleteRPT1, announcementDeleteRPT2);
wxLogInfo("Announcement enabled: %d, time: %u mins, record RPT1: \"%s\", record RPT2: \"%s\", delete RPT1: \"%s\", delete RPT2: \"%s\"", int(announcementEnabled), announcementTime / 60U, announcementRecordRPT1.c_str(), announcementRecordRPT2.c_str(), announcementDeleteRPT1.c_str(), announcementDeleteRPT2.c_str());
wxLogInfo("Modem type set to \"%s\"", modemType.c_str());
CModem* modem = NULL;
if (modemType.IsSameAs("DVAP")) {
wxString port;
unsigned int frequency;
int power, squelch;
m_config->getDVAP(port, frequency, power, squelch);
wxLogInfo("DVAP: port: %s, frequency: %u Hz, power: %d dBm, squelch: %d dBm", port.c_str(), frequency, power, squelch);
modem = new CDVAPController(port, frequency, power, squelch);
} else if (modemType.IsSameAs("DV-RPTR V1")) {
wxString port;
bool rxInvert, txInvert, channel;
unsigned int modLevel, txDelay;
m_config->getDVRPTR1(port, rxInvert, txInvert, channel, modLevel, txDelay);
wxLogInfo("DV-RPTR V1, port: %s, RX invert: %d, TX invert: %d, channel: %s, mod level: %u%%, TX delay: %u ms", port.c_str(), int(rxInvert), int(txInvert), channel ? "B" : "A", modLevel, txDelay);
modem = new CDVRPTRV1Controller(port, wxEmptyString, rxInvert, txInvert, channel, modLevel, txDelay);
} else if (modemType.IsSameAs("DV-RPTR V2")) {
CONNECTION_TYPE connType;
wxString usbPort, address;
bool txInvert;
unsigned int port, modLevel, txDelay;
m_config->getDVRPTR2(connType, usbPort, address, port, txInvert, modLevel, txDelay);
wxLogInfo("DV-RPTR V2, type: %d, address: %s:%u, TX invert: %d, mod level: %u%%, TX delay: %u ms", int(connType), address.c_str(), port, int(txInvert), modLevel, txDelay);
switch (connType) {
case CT_USB:
modem = new CDVRPTRV2Controller(usbPort, wxEmptyString, txInvert, modLevel, mode == MODE_DUPLEX || mode == MODE_TXANDRX, callsign, txDelay);
break;
case CT_NETWORK:
modem = new CDVRPTRV2Controller(address, port, txInvert, modLevel, mode == MODE_DUPLEX || mode == MODE_TXANDRX, callsign, txDelay);
break;
}
} else if (modemType.IsSameAs("DV-RPTR V3")) {
CONNECTION_TYPE connType;
wxString usbPort, address;
bool txInvert;
unsigned int port, modLevel, txDelay;
m_config->getDVRPTR3(connType, usbPort, address, port, txInvert, modLevel, txDelay);
wxLogInfo("DV-RPTR V3, type: %d, address: %s:%u, TX invert: %d, mod level: %u%%, TX delay: %u ms", int(connType), address.c_str(), port, int(txInvert), modLevel, txDelay);
switch (connType) {
case CT_USB:
modem = new CDVRPTRV3Controller(usbPort, wxEmptyString, txInvert, modLevel, mode == MODE_DUPLEX || mode == MODE_TXANDRX, callsign, txDelay);
break;
case CT_NETWORK:
modem = new CDVRPTRV3Controller(address, port, txInvert, modLevel, mode == MODE_DUPLEX || mode == MODE_TXANDRX, callsign, txDelay);
break;
}
} else if (modemType.IsSameAs("DVMEGA")) {
wxString port;
DVMEGA_VARIANT variant;
bool rxInvert, txInvert;
unsigned int txDelay, rxFrequency, txFrequency, power;
m_config->getDVMEGA(port, variant, rxInvert, txInvert, txDelay, rxFrequency, txFrequency, power);
wxLogInfo("DVMEGA, port: %s, variant: %d, RX invert: %d, TX invert: %d, TX delay: %u ms, rx frequency: %u Hz, tx frequency: %u Hz, power: %u %%", port.c_str(), int(variant), int(rxInvert), int(txInvert), txDelay, rxFrequency, txFrequency, power);
switch (variant) {
case DVMV_MODEM:
modem = new CDVMegaController(port, wxEmptyString, rxInvert, txInvert, txDelay);
break;
case DVMV_RADIO_2M:
case DVMV_RADIO_70CM:
case DVMV_RADIO_2M_70CM:
modem = new CDVMegaController(port, wxEmptyString, txDelay, rxFrequency, txFrequency, power);
break;
default:
wxLogError("Unknown DVMEGA variant - %d"), int(variant);
break;
}
} else if (modemType.IsSameAs("GMSK Modem")) {
USB_INTERFACE iface;
unsigned int address;
m_config->getGMSK(iface, address);
wxLogInfo("GMSK, interface: %d, address: %04X", int(iface), address);
modem = new CGMSKController(iface, address, mode == MODE_DUPLEX || mode == MODE_TXANDRX);
} else if (modemType.IsSameAs("Sound Card")) {
wxString rxDevice, txDevice;
bool rxInvert, txInvert;
wxFloat32 rxLevel, txLevel;
unsigned int txDelay, txTail;
m_config->getSoundCard(rxDevice, txDevice, rxInvert, txInvert, rxLevel, txLevel, txDelay, txTail);
wxLogInfo("Sound Card, devices: %s:%s, invert: %d:%d, levels: %.2f:%.2f, tx delay: %u ms, tx tail: %u ms", rxDevice.c_str(), txDevice.c_str(), int(rxInvert), int(txInvert), rxLevel, txLevel, txDelay, txTail);
modem = new CSoundCardController(rxDevice, txDevice, rxInvert, txInvert, rxLevel, txLevel, txDelay, txTail);
} else if (modemType.IsSameAs("MMDVM")) {
wxString port;
bool rxInvert, txInvert, pttInvert;
unsigned int txDelay, rxLevel, txLevel;
m_config->getMMDVM(port, rxInvert, txInvert, pttInvert, txDelay, rxLevel, txLevel);
wxLogInfo("MMDVM, port: %s, RX invert: %d, TX invert: %d, PTT invert: %d, TX delay: %u ms, RX level: %u%%, TX level: %u%%", port.c_str(), int(rxInvert), int(txInvert), int(pttInvert), txDelay, rxLevel, txLevel);
modem = new CMMDVMController(port, wxEmptyString, rxInvert, txInvert, pttInvert, txDelay, rxLevel, txLevel);
} else if (modemType.IsSameAs("Split")) {
wxString localAddress;
unsigned int localPort;
wxArrayString transmitterNames, receiverNames;
unsigned int timeout;
m_config->getSplit(localAddress, localPort, transmitterNames, receiverNames, timeout);
wxLogInfo("Split, local: %s:%u, timeout: %u ms", localAddress.c_str(), localPort, timeout);
for (unsigned int i = 0U; i < transmitterNames.GetCount(); i++) {
wxString name = transmitterNames.Item(i);
if (!name.IsEmpty())
wxLogInfo("\tTX %u name: %s", i + 1U, name.c_str());
}
for (unsigned int i = 0U; i < receiverNames.GetCount(); i++) {
wxString name = receiverNames.Item(i);
if (!name.IsEmpty())
wxLogInfo("\tRX %u name: %s", i + 1U, name.c_str());
}
modem = new CSplitController(localAddress, localPort, transmitterNames, receiverNames, timeout);
} else {
wxLogError("Unknown modem type: %s", modemType.c_str());
}
if (modem != NULL) {
bool res = modem->start();
if (!res)
wxLogError("Cannot open the D-Star modem");
else
m_thread->setModem(modem);
}
wxString controllerType;
unsigned int portConfig, activeHangTime;
bool pttInvert;
m_config->getController(controllerType, portConfig, pttInvert, activeHangTime);
wxLogInfo("Controller set to %s, config: %u, PTT invert: %d, active hang time: %u ms", controllerType.c_str(), portConfig, int(pttInvert), activeHangTime);
CExternalController* controller = NULL;
wxString port;
if (controllerType.StartsWith("Velleman K8055 - ", &port)) {
unsigned long num;
port.ToULong(&num);
controller = new CExternalController(new CK8055Controller(num), pttInvert);
} else if (controllerType.StartsWith("URI USB - ", &port)) {
unsigned long num;
port.ToULong(&num);
controller = new CExternalController(new CURIUSBController(num, true), pttInvert);
} else if (controllerType.StartsWith("Serial - ", &port)) {
controller = new CExternalController(new CSerialLineController(port, portConfig), pttInvert);
} else if (controllerType.StartsWith("Arduino - ", &port)) {
controller = new CExternalController(new CArduinoController(port), pttInvert);
#if defined(GPIO)
} else if (controllerType.IsSameAs("GPIO")) {
controller = new CExternalController(new CGPIOController(portConfig), pttInvert);
} else if (controllerType.IsSameAs(wxT("UDRC"))) {
switch(portConfig) {
case 1:
controller = new CUDRCController(AUTO_FM);
break;
case 3:
controller = new CUDRCController(DIGITAL_DIGITAL);
break;
case 4:
controller = new CUDRCController(FM_FM);
break;
case 5:
controller = new CUDRCController(HOTSPOT);
break;
default:
case 2:
controller = new CUDRCController(AUTO_AUTO);
break;
}
#endif
} else {
wxLogError("Unrecognized controller %s, using dummy controller", controllerType);
controller = new CExternalController(new CDummyController, pttInvert);
}
bool res = controller->open();
if (!res)
wxLogError("Cannot open the hardware interface - %s", controllerType.c_str());
else
m_thread->setController(controller, activeHangTime);
bool out1, out2, out3, out4;
m_config->getOutputs(out1, out2, out3, out4);
m_thread->setOutputs(out1, out2, out3, out4);
#if (wxUSE_GUI == 1)
m_frame->setOutputs(out1, out2, out3, out4);
#endif
wxLogInfo("Output 1 = %d, output 2 = %d, output 3 = %d, output 4 = %d", int(out1), int(out2), int(out3), int(out4));
bool enabled;
wxString rpt1Callsign, rpt2Callsign;
wxString shutdown, startup;
// XXX Initialization should be temporary until we get them coming
// from m_config->getControl
wxArrayString status;
status.Add("", 5);
wxArrayString command;
command.Add("", 6);
wxArrayString output;
output.Add("", 4);
m_config->getControl(enabled, rpt1Callsign, rpt2Callsign, shutdown, startup, status[0], status[1], status[2], status[3], status[4], command[0], m_commandLine[0], command[1], m_commandLine[1], command[2], m_commandLine[2], command[3], m_commandLine[3], command[4], m_commandLine[4], command[5], m_commandLine[5], output[0], output[1], output[2], output[3]);
m_thread->setControl(enabled, rpt1Callsign, rpt2Callsign, shutdown,
startup, command, status, output);
wxLogInfo(wxT("Control: enabled: %d, RPT1: %s, RPT2: %s, shutdown: %s, startup: %s, status1: %s, status2: %s, status3: %s, status4: %s, status5: %s, command1: %s = %s, command2: %s = %s, command3: %s = %s, command4: %s = %s, command5: %s = %s, command6: %s = %s, output1: %s, output2: %s, output3: %s, output4: %s"), enabled, rpt1Callsign.c_str(), rpt2Callsign.c_str(), shutdown.c_str(), startup.c_str(), status[0].c_str(), status[1].c_str(), status[2].c_str(), status[3].c_str(), status[4].c_str(), command[0].c_str(), m_commandLine[0].c_str(), command[1].c_str(), m_commandLine[1].c_str(), command[2].c_str(), m_commandLine[2].c_str(), command[3].c_str(), m_commandLine[3].c_str(), command[4].c_str(), m_commandLine[4].c_str(), command[5].c_str(), m_commandLine[5].c_str(), output[0].c_str(), output[1].c_str(), output[2].c_str(), output[3].c_str());
bool logging;
m_config->getLogging(logging);
m_thread->setLogging(logging, m_audioDir);
#if (wxUSE_GUI == 1)
m_frame->setLogging(logging);
#endif
wxLogInfo("Frame logging set to %d, in %s", int(logging), m_audioDir.c_str());
#if defined(__WINDOWS__)
wxFileName wlFilename(wxFileName::GetHomeDir(), PRIMARY_WHITELIST_FILE_NAME);
#else
wxFileName wlFilename(CONF_DIR, PRIMARY_WHITELIST_FILE_NAME);
#endif
bool exists = wlFilename.FileExists();
if (!exists) {
#if defined(__WINDOWS__)
wlFilename.Assign(wxFileName::GetHomeDir(), SECONDARY_WHITELIST_FILE_NAME);
#else
wlFilename.Assign(CONF_DIR, SECONDARY_WHITELIST_FILE_NAME);
#endif
exists = wlFilename.FileExists();
}
if (exists) {
CCallsignList* list = new CCallsignList(wlFilename.GetFullPath());
bool res = list->load();
if (!res) {
wxLogError("Unable to open white list file - %s", wlFilename.GetFullPath().c_str());
delete list;
} else {
wxLogInfo("%u callsigns loaded into the white list", list->getCount());
m_thread->setWhiteList(list);
}
}
#if defined(__WINDOWS__)
wxFileName blFilename(wxFileName::GetHomeDir(), PRIMARY_BLACKLIST_FILE_NAME);
#else
wxFileName blFilename(CONF_DIR, PRIMARY_BLACKLIST_FILE_NAME);
#endif
exists = blFilename.FileExists();
if (!exists) {
#if defined(__WINDOWS__)
blFilename.Assign(wxFileName::GetHomeDir(), SECONDARY_BLACKLIST_FILE_NAME);
#else
blFilename.Assign(CONF_DIR, SECONDARY_BLACKLIST_FILE_NAME);
#endif
exists = blFilename.FileExists();
}
if (exists) {
CCallsignList* list = new CCallsignList(blFilename.GetFullPath());
bool res = list->load();
if (!res) {
wxLogError("Unable to open black list file - %s", blFilename.GetFullPath().c_str());
delete list;
} else {
wxLogInfo("%u callsigns loaded into the black list", list->getCount());
m_thread->setBlackList(list);
}
}
#if defined(__WINDOWS__)
wxFileName glFilename(wxFileName::GetHomeDir(), GREYLIST_FILE_NAME);
#else
wxFileName glFilename(CONF_DIR, GREYLIST_FILE_NAME);
#endif
exists = glFilename.FileExists();
if (exists) {
CCallsignList* list = new CCallsignList(glFilename.GetFullPath());
bool res = list->load();
if (!res) {
wxLogError("Unable to open grey list file - %s", glFilename.GetFullPath().c_str());
delete list;
} else {
wxLogInfo("%u callsigns loaded into the grey list", list->getCount());
m_thread->setGreyList(list);
}
}
m_thread->Create();
m_thread->SetPriority(wxPRIORITY_MAX);
m_thread->Run();
}
void CSendingMonitor::Abort(void)
{
m_fAbort = TRUE;
m_pModem->Abort();
}