// Core Function doing the actual mesh processing.
bool FilterMeasurePlugin::applyFilter( const QString& filterName,MeshDocument& md,EnvWrap& env, vcg::CallBackPos * /*cb*/ )
{
if (filterName == "Compute Topological Measures")
{
CMeshO &m=md.mm()->cm;
tri::Allocator<CMeshO>::CompactFaceVector(m);
tri::Allocator<CMeshO>::CompactVertexVector(m);
md.mm()->updateDataMask(MeshModel::MM_FACEFACETOPO);
md.mm()->updateDataMask(MeshModel::MM_VERTFACETOPO);
int edgeManifNum = tri::Clean<CMeshO>::CountNonManifoldEdgeFF(m,true);
int faceEdgeManif = tri::UpdateSelection<CMeshO>::FaceCount(m);
tri::UpdateSelection<CMeshO>::VertexClear(m);
tri::UpdateSelection<CMeshO>::FaceClear(m);
int vertManifNum = tri::Clean<CMeshO>::CountNonManifoldVertexFF(m,true);
tri::UpdateSelection<CMeshO>::FaceFromVertexLoose(m);
int faceVertManif = tri::UpdateSelection<CMeshO>::FaceCount(m);
int edgeNum=0,borderNum=0;
tri::Clean<CMeshO>::CountEdges(m, edgeNum, borderNum);
int holeNum;
Log("V: %6i E: %6i F:%6i",m.vn,edgeNum,m.fn);
int unrefVertNum = tri::Clean<CMeshO>::CountUnreferencedVertex(m);
Log("Unreferenced Vertices %i",unrefVertNum);
Log("Boundary Edges %i",borderNum);
int connectedComponentsNum = tri::Clean<CMeshO>::CountConnectedComponents(m);
Log("Mesh is composed by %i connected component(s)\n",connectedComponentsNum);
if(edgeManifNum==0 && vertManifNum==0) {
Log("Mesh is two-manifold ");
}
if(edgeManifNum!=0) Log("Mesh has %i non two manifold edges and %i faces are incident on these edges\n",edgeManifNum,faceEdgeManif);
if(vertManifNum!=0) Log("Mesh has %i non two manifold vertexes and %i faces are incident on these vertices\n",vertManifNum,faceVertManif);
// For Manifold meshes compute some other stuff
if(vertManifNum==0 && edgeManifNum==0)
{
holeNum = tri::Clean<CMeshO>::CountHoles(m);
Log("Mesh has %i holes",holeNum);
int genus = tri::Clean<CMeshO>::MeshGenus(m.vn-unrefVertNum, edgeNum, m.fn, holeNum, connectedComponentsNum);
Log("Genus is %i",genus);
}
else
{
Log("Mesh has a undefined number of holes (non 2-manifold mesh)");
Log("Genus is undefined (non 2-manifold mesh)");
}
return true;
}
/************************************************************/
if (filterName == "Compute Topological Measures for Quad Meshes")
{
CMeshO &m=md.mm()->cm;
md.mm()->updateDataMask(MeshModel::MM_FACEFACETOPO);
md.mm()->updateDataMask(MeshModel::MM_FACEQUALITY);
if (! tri::Clean<CMeshO>::IsFFAdjacencyConsistent(m)) {
this->errorMessage = "Error: mesh has a not consistent FF adjacency";
return false;
}
if (! tri::Clean<CMeshO>::HasConsistentPerFaceFauxFlag(m)) {
this->errorMessage = "QuadMesh problem: mesh has a not consistent FauxEdge tagging";
return false;
}
int nQuads = tri::Clean<CMeshO>::CountBitQuads(m);
int nTris = tri::Clean<CMeshO>::CountBitTris(m);
int nPolys = tri::Clean<CMeshO>::CountBitPolygons(m);
int nLargePolys = tri::Clean<CMeshO>::CountBitLargePolygons(m);
if(nLargePolys>0) nQuads=0;
Log("Mesh has %8i triangles \n",nTris);
Log(" %8i quads \n",nQuads);
Log(" %8i polygons \n",nPolys);
Log(" %8i large polygons (with internal faux vertexes)",nLargePolys);
if (! tri::Clean<CMeshO>::IsBitTriQuadOnly(m)) {
this->errorMessage = "QuadMesh problem: the mesh is not TriQuadOnly";
return false;
}
//
// i
//
//
// i+1 i+2
tri::UpdateFlags<CMeshO>::FaceClearV(m);
Distribution<float> AngleD; // angle distribution
Distribution<float> RatioD; // ratio distribution
tri::UpdateFlags<CMeshO>::FaceClearV(m);
for(CMeshO::FaceIterator fi=m.face.begin(); fi!=m.face.end(); ++fi)
if(!fi->IsV())
{
fi->SetV();
// Collect the vertices
Point3f qv[4];
bool quadFound=false;
for(int i=0; i<3; ++i)
{
if((*fi).IsF(i) && !(*fi).IsF((i+1)%3) && !(*fi).IsF((i+2)%3) )
{
qv[0] = fi->V0(i)->P(),
qv[1] = fi->FFp(i)->V2( fi->FFi(i) )->P(),
qv[2] = fi->V1(i)->P(),
qv[3] = fi->V2(i)->P();
quadFound=true;
}
}
assert(quadFound);
for(int i=0; i<4; ++i)
AngleD.Add(fabs(90-math::ToDeg(Angle(qv[(i+0)%4] - qv[(i+1)%4], qv[(i+2)%4] - qv[(i+1)%4]))));
float edgeLen[4];
for(int i=0; i<4; ++i)
edgeLen[i]=Distance(qv[(i+0)%4],qv[(i+1)%4]);
std::sort(edgeLen,edgeLen+4);
RatioD.Add(edgeLen[0]/edgeLen[3]);
}
Log("Right Angle Discrepancy Avg %4.3f Min %4.3f Max %4.3f StdDev %4.3f Percentile 0.05 %4.3f percentile 95 %4.3f",
AngleD.Avg(), AngleD.Min(), AngleD.Max(),AngleD.StandardDeviation(),AngleD.Percentile(0.05),AngleD.Percentile(0.95));
Log("Quad Ratio Avg %4.3f Min %4.3f Max %4.3f", RatioD.Avg(), RatioD.Min(), RatioD.Max());
return true;
}
/************************************************************/
if(filterName == "Compute Geometric Measures")
{
CMeshO &m=md.mm()->cm;
tri::Inertia<CMeshO> I(m);
float Area = tri::Stat<CMeshO>::ComputeMeshArea(m);
float Volume = I.Mass();
Log("Mesh Bounding Box Size %f %f %f", m.bbox.DimX(), m.bbox.DimY(), m.bbox.DimZ());
Log("Mesh Bounding Box Diag %f ", m.bbox.Diag());
Log("Mesh Volume is %f", Volume);
Log("Mesh Surface is %f", Area);
Point3f bc=tri::Stat<CMeshO>::ComputeShellBarycenter(m);
Log("Thin shell barycenter %9.6f %9.6f %9.6f",bc[0],bc[1],bc[2]);
if(Volume<=0) Log("Mesh is not 'solid', no information on barycenter and inertia tensor.");
else
{
Log("Center of Mass is %f %f %f", I.CenterOfMass()[0], I.CenterOfMass()[1], I.CenterOfMass()[2]);
Matrix33f IT;
I.InertiaTensor(IT);
Log("Inertia Tensor is :");
Log(" | %9.6f %9.6f %9.6f |",IT[0][0],IT[0][1],IT[0][2]);
Log(" | %9.6f %9.6f %9.6f |",IT[1][0],IT[1][1],IT[1][2]);
Log(" | %9.6f %9.6f %9.6f |",IT[2][0],IT[2][1],IT[2][2]);
Matrix33f PCA;
Point3f pcav;
I.InertiaTensorEigen(PCA,pcav);
Log("Principal axes are :");
Log(" | %9.6f %9.6f %9.6f |",PCA[0][0],PCA[0][1],PCA[0][2]);
Log(" | %9.6f %9.6f %9.6f |",PCA[1][0],PCA[1][1],PCA[1][2]);
Log(" | %9.6f %9.6f %9.6f |",PCA[2][0],PCA[2][1],PCA[2][2]);
Log("axis momenta are :");
Log(" | %9.6f %9.6f %9.6f |",pcav[0],pcav[1],pcav[2]);
}
return true;
}
/************************************************************/
if((filterName == "Per Vertex Quality Stat") || (filterName == "Per Face Quality Stat") )
{
CMeshO &m=md.mm()->cm;
Distribution<float> DD;
if(filterName == "Per Vertex Quality Stat")
tri::Stat<CMeshO>::ComputePerVertexQualityDistribution(m, DD, false);
else
tri::Stat<CMeshO>::ComputePerFaceQualityDistribution(m, DD, false);
Log(" Min %f Max %f",DD.Min(),DD.Max());
Log(" Avg %f Med %f",DD.Avg(),DD.Percentile(0.5f));
Log(" StdDev %f",DD.StandardDeviation());
Log(" Variance %f",DD.Variance());
return true;
}
if((filterName == "Per Vertex Quality Histogram") || (filterName == "Per Face Quality Histogram") )
{
CMeshO &m=md.mm()->cm;
float RangeMin = env.evalFloat("HistMin");
float RangeMax = env.evalFloat("HistMax");
int binNum = env.evalInt("binNum");
Histogramf H;
H.SetRange(RangeMin,RangeMax,binNum);
if(filterName == "Per Vertex Quality Histogram")
{
for(CMeshO::VertexIterator vi = m.vert.begin(); vi != m.vert.end(); ++vi)
if(!(*vi).IsD())
{
assert(!math::IsNAN((*vi).Q()) && "You should never try to compute Histogram with Invalid Floating points numbers (NaN)");
H.Add((*vi).Q());
}
} else {
for(CMeshO::FaceIterator fi = m.face.begin(); fi != m.face.end(); ++fi)
if(!(*fi).IsD())
{
assert(!math::IsNAN((*fi).Q()) && "You should never try to compute Histogram with Invalid Floating points numbers (NaN)");
H.Add((*fi).Q());
}
}
Log("( -inf..%15.7f) : %4.0f",RangeMin,H.BinCountInd(0));
for(int i=1; i<=binNum; ++i)
Log("[%15.7f..%15.7f) : %4.0f",H.BinLowerBound(i),H.BinUpperBound(i),H.BinCountInd(i));
Log("[%15.7f.. +inf) : %4.0f",RangeMax,H.BinCountInd(binNum+1));
return true;
}
return false;
}
// Core Function doing the actual mesh processing.
bool FilterMeasurePlugin::applyFilter(QAction *filter, MeshDocument &md, RichParameterSet & par, vcg::CallBackPos */*cb*/)
{
CMeshO::FaceIterator fi;
switch(ID(filter))
{
case FP_MEASURE_TOPO :
{
CMeshO &m=md.mm()->cm;
md.mm()->updateDataMask(MeshModel::MM_FACEFACETOPO);
md.mm()->updateDataMask(MeshModel::MM_VERTFACETOPO);
tri::Allocator<CMeshO>::CompactFaceVector(m);
tri::Allocator<CMeshO>::CompactVertexVector(m);
tri::UpdateTopology<CMeshO>::FaceFace(m);
tri::UpdateTopology<CMeshO>::VertexFace(m);
int edgeManif = tri::Clean<CMeshO>::CountNonManifoldEdgeFF(m,true);
int faceEdgeManif = tri::UpdateSelection<CMeshO>::CountFace(m);
tri::UpdateSelection<CMeshO>::ClearVertex(m);
tri::UpdateSelection<CMeshO>::ClearFace(m);
int vertManif = tri::Clean<CMeshO>::CountNonManifoldVertexFF(m,true);
tri::UpdateSelection<CMeshO>::FaceFromVertexLoose(m);
int faceVertManif = tri::UpdateSelection<CMeshO>::CountFace(m);
int edgeNum=0,borderNum=0;
tri::Clean<CMeshO>::CountEdges(m, edgeNum, borderNum);
int holeNum;
Log("V: %6i E: %6i F:%6i",m.vn,edgeNum,m.fn);
Log("Boundary Edges %i",borderNum);
int connectedComponentsNum = tri::Clean<CMeshO>::CountConnectedComponents(m);
Log("Mesh is composed by %i connected component(s)",connectedComponentsNum);
if(edgeManif==0 && vertManif==0)
Log("Mesh has is two-manifold ");
if(edgeManif!=0) Log("Mesh has %i non two manifold edges and %i faces are incident on these edges\n",edgeManif,faceEdgeManif);
if(vertManif!=0) Log("Mesh has %i non two manifold vertexes and %i faces are incident on these vertices\n",vertManif,faceVertManif);
// For Manifold meshes compute some other stuff
if(vertManif && edgeManif)
{
holeNum = tri::Clean<CMeshO>::CountHoles(m);
Log("Mesh has %i holes",holeNum);
int genus = tri::Clean<CMeshO>::MeshGenus(m, holeNum, connectedComponentsNum, edgeNum);
Log("Genus is %i",genus);
}
}
break;
/************************************************************/
case FP_MEASURE_TOPO_QUAD :
{
CMeshO &m=md.mm()->cm;
md.mm()->updateDataMask(MeshModel::MM_FACEFACETOPO);
md.mm()->updateDataMask(MeshModel::MM_FACEQUALITY);
if (! tri::Clean<CMeshO>::IsFFAdjacencyConsistent(m)){
Log("Error: mesh has a not consistent FF adjacency");
return false;
}
if (! tri::Clean<CMeshO>::HasConsistentPerFaceFauxFlag(m)) {
Log("Warning: mesh has a not consistent FauxEdge tagging");
return false;
}
if (! tri::Clean<CMeshO>::IsBitTriQuadOnly(m)) {
Log("Warning: IsBitTriQuadOnly");
//return false;
}
// if (! tri::Clean<CMeshO>::HasConsistentEdges(m)) lastErrorDetected |= NOT_EDGES_CONST;
int nsinglets= tri::BitQuadOptimization< tri::BitQuad<CMeshO> >::MarkSinglets(m);
if ( nsinglets ) {
Log("Warning: MarkSinglets");
//return false;
}
if (! tri::BitQuad<CMeshO>::HasConsistentValencyFlag(m))
{
Log("Warning: HasConsistentValencyFlag");
//return false;
}
int nQuads = tri::Clean<CMeshO>::CountBitQuads(m);
int nTris = tri::Clean<CMeshO>::CountBitTris(m);
int nPolys = tri::Clean<CMeshO>::CountBitPolygons(m);
Log("Mesh has %i tri %i quad and %i polig",nTris,nQuads,nPolys);
}
break;
/************************************************************/
case FP_MEASURE_GEOM :
{
CMeshO &m=md.mm()->cm;
tri::Inertia<CMeshO> I;
I.Compute(m);
tri::UpdateBounding<CMeshO>::Box(m);
float Area = tri::Stat<CMeshO>::ComputeMeshArea(m);
float Volume = I.Mass();
Log("Mesh Bounding Box Size %f %f %f", m.bbox.DimX(), m.bbox.DimY(), m.bbox.DimZ());
Log("Mesh Bounding Box Diag %f ", m.bbox.Diag());
Log("Mesh Volume is %f", Volume);
Log("Center of Mass is %f %f %f", I.CenterOfMass()[0], I.CenterOfMass()[1], I.CenterOfMass()[2]);
Matrix33f IT;
I.InertiaTensor(IT);
Log("Inertia Tensor is :");
Log(" | %9.6f %9.6f %9.6f |",IT[0][0],IT[0][1],IT[0][2]);
Log(" | %9.6f %9.6f %9.6f |",IT[1][0],IT[1][1],IT[1][2]);
Log(" | %9.6f %9.6f %9.6f |",IT[2][0],IT[2][1],IT[2][2]);
Log("Mesh Surface is %f", Area);
Matrix44f PCA;
Point4f pcav;
I.InertiaTensorEigen(PCA,pcav);
Log("Principal axes are :");
Log(" | %9.6f %9.6f %9.6f |",PCA[0][0],PCA[0][1],PCA[0][2]);
Log(" | %9.6f %9.6f %9.6f |",PCA[1][0],PCA[1][1],PCA[1][2]);
Log(" | %9.6f %9.6f %9.6f |",PCA[2][0],PCA[2][1],PCA[2][2]);
// Point3f ax0(PCA[0][0],PCA[0][1],PCA[0][2]);
// Point3f ax1(PCA[1][0],PCA[1][1],PCA[1][2]);
// Point3f ax2(PCA[2][0],PCA[2][1],PCA[2][2]);
// Log("ax0*ax1 %f (len ax0 %f) ",ax0*ax1, Norm(ax0));
// Log("ax1*ax2 %f (len ax1 %f) ",ax1*ax2, Norm(ax1));
// Log("ax0*ax2 %f (len ax2 %f) ",ax0*ax2, Norm(ax2));
Log("axis momenta are :");
Log(" | %9.6f %9.6f %9.6f |",pcav[0],pcav[1],pcav[2]);
}
break;
/************************************************************/
case FP_MEASURE_VERTEX_QUALITY_DISTRIBUTION :
case FP_MEASURE_FACE_QUALITY_DISTRIBUTION :
{
CMeshO &m=md.mm()->cm;
Distribution<float> DD;
if(ID(filter)==FP_MEASURE_VERTEX_QUALITY_DISTRIBUTION)
tri::Stat<CMeshO>::ComputePerVertexQualityDistribution(m, DD, false);
else
tri::Stat<CMeshO>::ComputePerFaceQualityDistribution(m, DD, false);
Log(" Min %f Max %f",DD.Min(),DD.Max());
Log(" Avg %f Med %f",DD.Avg(),DD.Percentile(0.5f));
Log(" StdDev %f",DD.StandardDeviation());
Log(" Variance %f",DD.Variance());
}
break;
case FP_MEASURE_GAUSSCURV :
{
CMeshO &m=md.mm()->cm;
SimpleTempData<CMeshO::VertContainer, float> TDArea(m.vert,0.0f);
SimpleTempData<CMeshO::VertContainer, float> TDAngleSum(m.vert,0);
tri::UpdateQuality<CMeshO>::VertexConstant(m,0);
float angle[3];
CMeshO::FaceIterator fi;
for(fi=m.face.begin(); fi!= m.face.end(); ++fi)
{
angle[0] = math::Abs(Angle( (*fi).P(1)-(*fi).P(0),(*fi).P(2)-(*fi).P(0) ));
angle[1] = math::Abs(Angle( (*fi).P(0)-(*fi).P(1),(*fi).P(2)-(*fi).P(1) ));
angle[2] = M_PI-(angle[0]+angle[1]);
float area= DoubleArea(*fi)/6.0f;
for(int i=0;i<3;++i)
{
TDArea[(*fi).V(i)]+=area;
TDAngleSum[(*fi).V(i)]+=angle[i];
}
}
CMeshO::VertexIterator vi;
float totalSum=0;
for(vi=m.vert.begin(); vi!= m.vert.end(); ++vi)
{
(*vi).Q() = (2.0*M_PI-TDAngleSum[vi]);//*TDArea[vi];
//if((*vi).IsS())
totalSum += (*vi).Q();
}
Log("integrated is %f (%f*pi)", totalSum,totalSum/M_PI);
} break;
case FP_MEASURE_VERTEX_QUALITY_HISTOGRAM:
case FP_MEASURE_FACE_QUALITY_HISTOGRAM:
{
CMeshO &m=md.mm()->cm;
float RangeMin = par.getFloat("minVal");
float RangeMax = par.getFloat("maxVal");
int binNum = par.getInt("binNum");
Histogramf H;
H.SetRange(RangeMin,RangeMax,binNum);
if(ID(filter)==FP_MEASURE_VERTEX_QUALITY_DISTRIBUTION)
{
for(CMeshO::VertexIterator vi = m.vert.begin(); vi != m.vert.end(); ++vi)
if(!(*vi).IsD())
{
assert(!math::IsNAN((*vi).Q()) && "You should never try to compute Histogram with Invalid Floating points numbers (NaN)");
H.Add((*vi).Q());
}
}else{
for(CMeshO::FaceIterator fi = m.face.begin(); fi != m.face.end(); ++fi)
if(!(*fi).IsD())
{
assert(!math::IsNAN((*fi).Q()) && "You should never try to compute Histogram with Invalid Floating points numbers (NaN)");
H.Add((*fi).Q());
}
}
Log("( -inf..%15.7f) : %i",RangeMin,H.BinCountInd(0));
for(int i=1;i<=binNum;++i)
Log("[%15.7f..%15.7f) : %i",H.BinLowerBound(i),H.BinUpperBound(i),H.BinCountInd(i));
Log("[%15.7f.. +inf) : %i",RangeMax,H.BinCountInd(binNum+1));
} break;
default: assert(0);
}
return true;
}
