void MidiParser_SMF::parseNextEvent(EventInfo &info) {
info.start = _position._play_pos;
info.delta = readVLQ(_position._play_pos);
// Process the next info. If mpMalformedPitchBends
// was set, we must skip over any pitch bend events
// because they are from Simon games and are not
// real pitch bend events, they're just two-byte
// prefixes before the real info.
do {
if ((_position._play_pos[0] & 0xF0) >= 0x80)
info.event = *(_position._play_pos++);
else
info.event = _position._running_status;
} while (_malformedPitchBends && (info.event & 0xF0) == 0xE0 && _position._play_pos++);
if (info.event < 0x80)
return;
_position._running_status = info.event;
switch (info.command()) {
case 0x9: // Note On
info.basic.param1 = *(_position._play_pos++);
info.basic.param2 = *(_position._play_pos++);
if (info.basic.param2 == 0)
info.event = info.channel() | 0x80;
info.length = 0;
break;
case 0xC:
case 0xD:
info.basic.param1 = *(_position._play_pos++);
info.basic.param2 = 0;
break;
case 0x8:
case 0xA:
case 0xB:
case 0xE:
info.basic.param1 = *(_position._play_pos++);
info.basic.param2 = *(_position._play_pos++);
info.length = 0;
break;
case 0xF: // System Common, Meta or SysEx event
switch (info.event & 0x0F) {
case 0x2: // Song Position Pointer
info.basic.param1 = *(_position._play_pos++);
info.basic.param2 = *(_position._play_pos++);
break;
case 0x3: // Song Select
info.basic.param1 = *(_position._play_pos++);
info.basic.param2 = 0;
break;
case 0x6:
case 0x8:
case 0xA:
case 0xB:
case 0xC:
case 0xE:
info.basic.param1 = info.basic.param2 = 0;
break;
case 0x0: // SysEx
info.length = readVLQ(_position._play_pos);
info.ext.data = _position._play_pos;
_position._play_pos += info.length;
break;
case 0xF: // META event
info.ext.type = *(_position._play_pos++);
info.length = readVLQ(_position._play_pos);
info.ext.data = _position._play_pos;
_position._play_pos += info.length;
break;
default:
warning("MidiParser_SMF::parseNextEvent: Unsupported event code %x", info.event);
}
}
}
void MidiParser_S1D::parseNextEvent(EventInfo &info) {
info.start = _position._play_pos;
info.delta = _no_delta ? 0 : readVLQ2(_position._play_pos);
_no_delta = false;
info.event = *(_position._play_pos++);
if (info.command() < 0x8) {
_no_delta = true;
info.event += 0x80;
}
switch (info.command()) {
case 0x8:
info.basic.param1 = *(_position._play_pos++);
info.basic.param2 = 0;
info.length = 0;
break;
case 0x9:
info.basic.param1 = *(_position._play_pos++);
info.basic.param2 = *(_position._play_pos++); // I'm ASSUMING this byte is velocity!
info.length = 0;
break;
case 0xA:
case 0xB:
// I'm not sure what these are meant to do, or what the
// parameter is. Elvira 1 needs them, though, and who am I to
// argue with her?
info.basic.param1 = *(_position._play_pos++);
info.basic.param2 = 0;
break;
case 0xC:
info.basic.param1 = *(_position._play_pos++);
info.basic.param2 = 0;
++_position._play_pos; // I have NO IDEA what the second byte is for.
break;
case 0xD:
// Triggered by MOD0/MOD1/MOD2/MOD3/MOD4/MOD6/MOD7/MOD8/MOD9 in Elvira 2
// Triggered by MOD0/MOD2/MOD3/MOD5/MOD6/MOD7/MOD8/MOD9/MOD10/MOD12/MOD14/MOD15/MOD20 in Waxworks
break;
case 0xE:
// Triggered by MOD9 in Elvira 1
// Triggered by MOD3/MOD5 in Elvira 2
// Triggered by MOD3/MOD7/MOD8/MOD13 in Waxworks
break;
case 0xF:
switch (info.event & 0x0F) {
case 0x0:
// Trigged by MOD2/MOD6/MOD15 in Waxworks
// Pure guesswork
info.ext.type = *(_position._play_pos++);
info.length = readVLQ(_position._play_pos);
info.ext.data = _position._play_pos;
break;
case 0x3: // Not sure, Song Select?
// Trigged by MOD1/MOD7/MOD10 in Elvira 1
info.basic.param1 = *(_position._play_pos++);
info.basic.param2 = 0;
break;
case 0x4:
// Trigged by MOD8 in Elvira 1
break;
case 0x7:
// Trigged by MOD6 in Elvira 2
// Trigged by MOD5 in Waxworks
break;
case 0x8: // Not sure, ?
// Trigged by MOD19 in Waxworks
info.basic.param1 = info.basic.param2 = 0;
break;
case 0xA:
// Trigged by MOD5 in Elvira 2
break;
case 0xC:
// This means End of Track.
// Rewrite in SMF (MIDI transmission) form.
info.event = 0xFF;
info.ext.type = 0x2F;
info.length = 0;
break;
case 0xF: // Not sure, META event?
// Trigged by MOD8/MOD9/MOD11/MOD12/MOD13 in Waxworks
info.ext.type = *(_position._play_pos++);
info.length = readVLQ(_position._play_pos);
info.ext.data = _position._play_pos;
_position._play_pos += info.length;
break;
default:
error("MidiParser_S1D: Unexpected type 0x%02X found", (int) info.event);
break;
}
break;
default:
error("MidiParser_S1D: Unexpected event 0x%02X found", (int) info.command());
break;
}
}
void MidiParser_SH::parseNextEvent(EventInfo &info) {
Common::StackLock lock(_mutex);
// warning("parseNextEvent");
// there is no delta right at the start of the music data
// this order is essential, otherwise notes will get delayed or even go missing
if (_position._playPos != _tracks[0]) {
info.delta = *(_position._playPos++);
} else {
info.delta = 0;
}
info.start = _position._playPos;
info.event = *_position._playPos++;
//warning("Event %x", info.event);
_position._runningStatus = info.event;
switch (info.command()) {
case 0xC: { // program change
int idx = *_position._playPos++;
info.basic.param1 = idx & 0x7f;
info.basic.param2 = 0;
}
break;
case 0xD:
info.basic.param1 = *_position._playPos++;
info.basic.param2 = 0;
break;
case 0xB:
info.basic.param1 = *_position._playPos++;
info.basic.param2 = *_position._playPos++;
info.length = 0;
break;
case 0x8:
case 0x9:
case 0xA:
case 0xE:
info.basic.param1 = *(_position._playPos++);
info.basic.param2 = *(_position._playPos++);
if (info.command() == 0x9 && info.basic.param2 == 0) {
// NoteOn with param2==0 is a NoteOff
info.event = info.channel() | 0x80;
}
info.length = 0;
break;
case 0xF:
if (info.event == 0xFF) {
error("SysEx META event 0xFF");
byte type = *(_position._playPos++);
switch(type) {
case 0x2F:
// End of Track
allNotesOff();
stopPlaying();
unloadMusic();
return;
case 0x51:
warning("TODO: 0xFF / 0x51");
return;
default:
warning("TODO: 0xFF / %x Unknown", type);
break;
}
} else if (info.event == 0xFC) {
// Official End-Of-Track signal
debugC(kDebugLevelMusic, "Music: System META event 0xFC");
byte type = *(_position._playPos++);
switch (type) {
case 0x80: // end of track, triggers looping
debugC(kDebugLevelMusic, "Music: META event triggered looping");
jumpToTick(0, true, true, false);
break;
case 0x81: // end of track, stop playing
debugC(kDebugLevelMusic, "Music: META event triggered music stop");
stopPlaying();
unloadMusic();
break;
default:
error("MidiParser_SH::parseNextEvent: Unknown META event 0xFC type %x", type);
break;
}
} else {
warning("TODO: %x / Unknown", info.event);
break;
}
break;
default:
warning("MidiParser_SH::parseNextEvent: Unsupported event code %x", info.event);
break;
}// switch (info.command())
}
void MidiParser_RO::parseNextEvent (EventInfo &info) {
_markerCount += _lastMarkerCount;
_lastMarkerCount = 0;
info.delta = 0;
do {
info.start = _position._play_pos;
info.event = *(_position._play_pos++);
if (info.command() == 0xA) {
++_lastMarkerCount;
info.event = 0xF0;
} else if (info.event == 0xF0 || info.event == 0xF1) {
byte delay = *(_position._play_pos++);
info.delta += delay;
if (info.event == 0xF1) {
// This event is, as far as we have been able
// to determine, only used in one single song
// in EGA Loom. It seems to be meant for adding
// values greater than 255 to info.delta. See
// bug #1498785.
info.delta += 256;
}
continue;
}
break;
} while (true);
// Seems to indicate EOT
if (info.event == 0) {
info.event = 0xFF;
info.ext.type = 0x2F;
info.length = 0;
info.ext.data = 0;
return;
}
if (info.event < 0x80)
return;
_position._running_status = info.event;
switch (info.command()) {
case 0xC:
info.basic.param1 = *(_position._play_pos++);
info.basic.param2 = 0;
break;
case 0x8: case 0x9: case 0xB:
info.basic.param1 = *(_position._play_pos++);
info.basic.param2 = *(_position._play_pos++);
if (info.command() == 0x9 && info.basic.param2 == 0)
info.event = info.channel() | 0x80;
info.length = 0;
break;
case 0xF: // Marker and EOT messages
info.length = 0;
info.ext.data = 0;
if (info.event == 0xFF) {
_autoLoop = true;
info.ext.type = 0x2F;
} else {
info.ext.type = 0x7F; // Bogus META
}
info.event = 0xFF;
break;
}
}
void MidiParser_S1D::parseNextEvent(EventInfo &info) {
info.start = _position._playPos;
info.length = 0;
info.delta = _noDelta ? 0 : readVLQ2(_position._playPos);
_noDelta = false;
info.event = *_position._playPos++;
if (!(info.event & 0x80)) {
_noDelta = true;
info.event |= 0x80;
}
if (info.event == 0xFC) {
// This means End of Track.
// Rewrite in SMF (MIDI transmission) form.
info.event = 0xFF;
info.ext.type = 0x2F;
} else {
switch (info.command()) {
case 0x8: // note off
info.basic.param1 = *_position._playPos++;
info.basic.param2 = 0;
break;
case 0x9: // note on
info.basic.param1 = *_position._playPos++;
info.basic.param2 = *_position._playPos++;
// Rewrite note on events with velocity 0 as note off events.
// This is the actual meaning of this, but theoretically this
// should not need to be rewritten, since all MIDI devices should
// interpret it like that. On the other hand all our MidiParser
// implementations do it and there seems to be code in MidiParser
// which relies on this for tracking active notes.
if (info.basic.param2 == 0) {
info.event = info.channel() | 0x80;
}
break;
case 0xA: { // loop control
// In case the stop mode(?) is set to 0x80 this will stop the
// track over here.
const int16 loopIterations = int8(*_position._playPos++);
if (!loopIterations) {
_loops[info.channel()].start = _position._playPos;
} else {
if (!_loops[info.channel()].timer) {
if (_loops[info.channel()].start) {
_loops[info.channel()].timer = uint16(loopIterations);
_loops[info.channel()].end = _position._playPos;
// Go to the start of the loop
_position._playPos = _loops[info.channel()].start;
}
} else {
if (_loops[info.channel()].timer)
_position._playPos = _loops[info.channel()].start;
--_loops[info.channel()].timer;
}
}
// We need to read the next midi event here. Since we can not
// safely pass this event to the MIDI event processing.
chainEvent(info);
} break;
case 0xB: // auto stop marker(?)
// In case the stop mode(?) is set to 0x80 this will stop the
// track.
// We need to read the next midi event here. Since we can not
// safely pass this event to the MIDI event processing.
chainEvent(info);
break;
case 0xC: // program change
info.basic.param1 = *_position._playPos++;
info.basic.param2 = 0;
break;
case 0xD: // jump to loop end
if (_loops[info.channel()].end)
_position._playPos = _loops[info.channel()].end;
// We need to read the next midi event here. Since we can not
// safely pass this event to the MIDI event processing.
chainEvent(info);
break;
default:
// The original called some other function from here, which seems
// not to be MIDI related.
warning("MidiParser_S1D: default case %d", info.channel());
// We need to read the next midi event here. Since we can not
// safely pass this event to the MIDI event processing.
chainEvent(info);
break;
}
}
}
