sim_complete_boxgen_pions(Int_t nEvents = 100, TString pre="", Float_t mom = 6.231552,  TString  SimEngine ="TGeant3")
{
  //-----User Settings:-----------------------------------------------

  if(pre == ""){
	  TString  OutputFile		="sim_complete.root";
	  TString  ParOutputfile  	="simparams.root";
  }
  else{
	  TString  OutputFile 		= pre + "_sim_complete.root";
	  TString  ParOutputfile  	=pre + "_simparams.root";
  }


  TString  MediaFile      ="media_pnd.geo";
  gDebug                  = 0;
  TString digiFile        = "all.par"; //The emc run the hit producer directly
                                       // choose your event generator
  Bool_t UseEvtGenDirect      =kFALSE;
  Bool_t UseDpm 	      =kFALSE;
  Bool_t UseFtf 	      =kFALSE;
  Bool_t UseBoxGenerator      =kTRUE;
  
  TString evtPdlFile = "evt.pdl";

  Double_t BeamMomentum = 0.; // beam momentum ONLY for the scaling of the dipole field.
  if (UseBoxGenerator)
  {
    BeamMomentum   =mom; // ** change HERE if you run Box generator
  }
  else
  {
    BeamMomentum = mom;  // for DPM/EvtGen BeamMomentum is always = mom
  }
  //------------------------------------------------------------------
  TLorentzVector fIni(0, 0, mom, sqrt(mom*mom+9.3827203e-01*9.3827203e-01)+9.3827203e-01);
  TDatabasePDG::Instance()->AddParticle("pbarpSystem","pbarpSystem",fIni.M(),kFALSE,0.1,0, "",88888);
  //------------------------------------------------------------------
  TStopwatch timer;
  timer.Start();
  gRandom->SetSeed();
  
  // Create the Simulation run manager--------------------------------
  FairRunSim *fRun = new FairRunSim();
  fRun->SetName(SimEngine.Data() );
  fRun->SetOutputFile(OutputFile.Data());
  fRun->SetGenerateRunInfo(kFALSE);
  fRun->SetBeamMom(BeamMomentum);
  fRun->SetMaterials(MediaFile.Data());
  fRun->SetUseFairLinks(kTRUE);
  FairRuntimeDb *rtdb=fRun->GetRuntimeDb();
  
  // Set the parameters
  //-------------------------------
  TString allDigiFile = gSystem->Getenv("VMCWORKDIR");
  allDigiFile += "/macro/params/";
  allDigiFile += digiFile;
  
  
  //-------Set the parameter output --------------------
  FairParAsciiFileIo* parIo1 = new FairParAsciiFileIo();
  parIo1->open(allDigiFile.Data(),"in");
  rtdb->setFirstInput(parIo1);
  
  //---------------------Set Parameter output      ----------
  Bool_t kParameterMerged=kTRUE;
  FairParRootFileIo* output=new FairParRootFileIo(kParameterMerged);
  output->open(ParOutputfile.Data());
  rtdb->setOutput(output);
  
  // Create and add detectors
  
  //-------------------------  CAVE      -----------------
  
  FairModule *Cave= new PndCave("CAVE");
  Cave->SetGeometryFileName("pndcave.geo");
  fRun->AddModule(Cave);
  //-------------------------  Magnet   -----------------
  //FairModule *Magnet= new PndMagnet("MAGNET");
  //Magnet->SetGeometryFileName("FullSolenoid_V842.root");
  //Magnet->SetGeometryFileName("FullSuperconductingSolenoid_v831.root");
  //fRun->AddModule(Magnet);
  FairModule *Dipole= new PndMagnet("MAGNET");
  Dipole->SetGeometryFileName("dipole.geo");
  fRun->AddModule(Dipole);
  //-------------------------  Pipe     -----------------
  FairModule *Pipe= new PndPipe("PIPE");
  Pipe->SetGeometryFileName("beampipe_201309.root");
  fRun->AddModule(Pipe);
  //-------------------------  STT       -----------------
  FairDetector *Stt= new PndStt("STT", kTRUE);
  Stt->SetGeometryFileName("straws_skewed_blocks_35cm_pipe.geo");
  fRun->AddModule(Stt);
  //-------------------------  MVD       -----------------
  FairDetector *Mvd = new PndMvdDetector("MVD", kTRUE);
  Mvd->SetGeometryFileName("Mvd-2.1_FullVersion.root");
  fRun->AddModule(Mvd);
  //-------------------------  GEM       -----------------
  FairDetector *Gem = new PndGemDetector("GEM", kTRUE);
  Gem->SetGeometryFileName("gem_3Stations_Tube.root");
  fRun->AddModule(Gem);
  //-------------------------  EMC       -----------------
  PndEmc *Emc = new PndEmc("EMC",kTRUE);
  Emc->SetGeometryVersion(1);
  Emc->SetStorageOfData(kFALSE);
  fRun->AddModule(Emc);
  //-------------------------  SCITIL    -----------------
  FairDetector *SciT = new PndSciT("SCIT",kTRUE);
  SciT->SetGeometryFileName("SciTil_201504.root");
  fRun->AddModule(SciT);
  //-------------------------  DRC       -----------------
  PndDrc *Drc = new PndDrc("DIRC", kTRUE);
  Drc->SetGeometryFileName("dirc_l0_p0_updated.root");
  Drc->SetRunCherenkov(kFALSE);
  fRun->AddModule(Drc);
  //-------------------------  DISC      -----------------
  PndDsk* Dsk = new PndDsk("DSK", kTRUE);
  Dsk->SetStoreCerenkovs(kFALSE);
  Dsk->SetStoreTrackPoints(kFALSE);
  fRun->AddModule(Dsk);
  //-------------------------  MDT       -----------------
  PndMdt *Muo = new PndMdt("MDT",kTRUE);
  Muo->SetBarrel("fast");
  Muo->SetEndcap("fast");
  Muo->SetMuonFilter("fast");
  Muo->SetForward("fast");
  Muo->SetMdtMagnet(kTRUE);
  Muo->SetMdtCoil(kTRUE);
  Muo->SetMdtMFIron(kTRUE);
  fRun->AddModule(Muo);
  //-------------------------  FTS       -----------------
  FairDetector *Fts= new PndFts("FTS", kTRUE);
  Fts->SetGeometryFileName("fts.geo");
  fRun->AddModule(Fts);
  //-------------------------  FTOF      -----------------
  FairDetector *FTof = new PndFtof("FTOF",kTRUE);
  FTof->SetGeometryFileName("ftofwall.root");
  fRun->AddModule(FTof);
  //-------------------------  RICH       ----------------
  FairDetector *Rich= new PndRich("RICH",kFALSE);
  Rich->SetGeometryFileName("rich_v2_shift.geo");
  fRun->AddModule(Rich);
  
  // Create and Set Event Generator
  //-------------------------------
  FairPrimaryGenerator* primGen = new FairPrimaryGenerator();
  fRun->SetGenerator(primGen);
	 
  if(UseBoxGenerator){	// Box Generator
	  FairBoxGenerator* boxGenPiM = new FairBoxGenerator(-211, 1); // 13 = muon; 1 = multipl.
    boxGenPiM->SetPRange(0., 0.6); // GeV/c
    boxGenPiM->SetPhiRange(0., 360.); // Azimuth angle range [degree]
    boxGenPiM->SetThetaRange(0., 70); // Polar angle in lab system range [degree]
    boxGenPiM->SetXYZ(0., 0., 0.); // cm
    primGen->AddGenerator(boxGenPiM);

    FairBoxGenerator* boxGenPiP = new FairBoxGenerator(211, 1); // 13 = muon; 1 = multipl.
	boxGenPiP->SetPRange(0.,0.6); // GeV/c
	boxGenPiP->SetPhiRange(0., 360.); // Azimuth angle range [degree]
	boxGenPiP->SetThetaRange(0., 70); // Polar angle in lab system range [degree]
	boxGenPiP->SetXYZ(0., 0., 0.); // cm
	primGen->AddGenerator(boxGenPiP);

  }
  if(UseDpm){
    PndDpmDirect *Dpm= new PndDpmDirect(mom,1);
    primGen->AddGenerator(Dpm);
  }
  if(UseFtf){
    //          TString macfile = gSystem->Getenv("VMCWORKDIR");
    //	  macfile += "/pgenerators/FtfEvtGen/PbarP.mac";
    //	  PndFtfDirect *Ftf = new PndFtfDirect(macfile.Data());
    PndFtfDirect *Ftf = new PndFtfDirect("anti_proton", "G4_H", 1, "ftfp", mom, 123456);
    primGen->AddGenerator(Ftf);
  }
  if(UseEvtGenDirect){
//    TString  EvtInput =gSystem->Getenv("VMCWORKDIR");
//    EvtInput+="/macro/run/psi2s_Jpsi2pi_Jpsi_mumu.dec";
	  TString EvtInput="/home/ikp1/puetz/panda/mysimulations/analysis/XiMinus_1820_lambda0_K.dec";
//    PndEvtGenDirect *EvtGen = new PndEvtGenDirect("pbarpSystem", EvtInput.Data(), mom);
	  PndEvtGenDirect * EvtGen = new PndEvtGenDirect("pbarpSystem", EvtInput.Data(), mom, -1, "", evtPdlFile.Data());
    EvtGen->SetStoreTree(kTRUE);
    primGen->AddGenerator(EvtGen);
  }
  
  //---------------------Create and Set the Field(s)----------
  PndMultiField *fField= new PndMultiField("AUTO");
  fRun->SetField(fField);
  
  // EMC Hit producer
  //-------------------------------
  PndEmcHitProducer* emcHitProd = new PndEmcHitProducer();
  fRun->AddTask(emcHitProd);
  
  //-------------------------  Initialize the RUN  -----------------
  fRun->Init();
  //-------------------------  Run the Simulation  -----------------
  fRun->Run(nEvents);
  //-------------------------  Save the parameters -----------------
  rtdb->saveOutput();
  //------------------------Print some info and exit----------------
  timer.Stop();
  Double_t rtime = timer.RealTime();
  Double_t ctime = timer.CpuTime();
  printf("RealTime=%f seconds, CpuTime=%f seconds\n",rtime,ctime);
  
  cout << " Test passed" << endl;
  cout << " All ok " << endl;
  
  exit(0);
  
};
Exemple #2
0
void run_sim(Int_t gen=1, Int_t nEvents = 1, Int_t fileNum = 100)
{
    TString rootVersion = "feb16";
    const char* setup = "sis100_electron"; 
    TString sfileNum = "";
    sfileNum += fileNum;
// ========================================================================
  //          Adjust this part according to your requirements

  // ----- Paths and file names  --------------------------------------------
    
  TString inDir = "/hera/cbm/users/klochkov/cbm/data/input/au10au/shield/test_10k/";
  TString inFile = inDir + "au10au_" + sfileNum + ".root";  
    
  TString outDir = "/hera/cbm/users/klochkov/cbm/data/au10au_10k_test_1/";
 
  TString outFile = outDir + "sim/mc_" + sfileNum +  ".root";
  TString parFile = outDir + "sim/params_" + sfileNum +  ".root";
  TString geoFileNamePsd = outDir + "geo/psd_geo_xy_" + sfileNum + ".txt";
  TString geoFileName = outDir + "geo/geofile_" + sfileNum +  ".root"; 
  
  TString SourceDir = gSystem->Getenv("VMCWORKDIR");
  TString setupFile =  SourceDir + "/geometry/setup/sis100_electron_setup.C";   //TODO
  TString setupFunct = setup;
  setupFunct += "_setup()";
  
  gROOT->LoadMacro(setupFile);
  gInterpreter->ProcessLine(setupFunct);


  // Function needed for CTest runtime dependency
//   TString depFile = Remove_CTest_Dependency_File(outDir, "run_sim" , setup);

  // --- Logger settings ----------------------------------------------------
  TString logLevel = "INFO";   // "DEBUG";
  TString logVerbosity = "LOW";
  // ------------------------------------------------------------------------


  // --- Define the target geometry -----------------------------------------
  //
  // The target is not part of the setup, since one and the same setup can
  // and will be used with different targets.
  // The target is constructed as a tube in z direction with the specified
  // diameter (in x and y) and thickness (in z). It will be placed at the
  // specified position as daughter volume of the volume present there. It is
  // in the responsibility of the user that no overlaps or extrusions are
  // created by the placement of the target.
  //
  TString  targetElement   = "Gold";
  Double_t targetThickness = 0.025;  // full thickness in cm
  Double_t targetDiameter  = 2.5;    // diameter in cm
  Double_t targetPosX      = 0.;     // target x position in global c.s. [cm]
  Double_t targetPosY      = 0.;     // target y position in global c.s. [cm]
  Double_t targetPosZ      = 0.;     // target z position in global c.s. [cm]
  Double_t targetRotY      = 0.;     // target rotation angle around the y axis [deg]
  // ------------------------------------------------------------------------


  // --- Define the creation of the primary vertex   ------------------------
  //
  // By default, the primary vertex point is sampled from a Gaussian
  // distribution in both x and y with the specified beam profile width,
  // and from a flat distribution in z over the extension of the target.
  // By setting the respective flags to kFALSE, the primary vertex will always
  // at the (0., 0.) in x and y and in the z centre of the target, respectively.
  //
  Bool_t smearVertexXY = kTRUE;
  Bool_t smearVertexZ  = kTRUE;
  Double_t beamWidthX   = 1.;  // Gaussian sigma of the beam profile in x [cm]
  Double_t beamWidthY   = 1.;  // Gaussian sigma of the beam profile in y [cm]
  // ------------------------------------------------------------------------
  

  // In general, the following parts need not be touched
  // ========================================================================

  cout << "[INFO   ] Setup: " << setup << endl;

  // ----    Debug option   -------------------------------------------------
  gDebug = 0;
  // ------------------------------------------------------------------------


  // -----   Timer   --------------------------------------------------------
  TStopwatch timer;
  timer.Start();
  // ------------------------------------------------------------------------

  
  // -----   Create simulation run   ----------------------------------------
  FairRunSim* run = new FairRunSim();
  run->SetName("TGeant4");              // Transport engine
  run->SetOutputFile(outFile);          // Output file
  run->SetGenerateRunInfo(kTRUE);       // Create FairRunInfo file
  FairRuntimeDb* rtdb = run->GetRuntimeDb();
  // ------------------------------------------------------------------------


  // -----   Logger settings   ----------------------------------------------
  gLogger->SetLogScreenLevel(logLevel.Data());
  gLogger->SetLogVerbosityLevel(logVerbosity.Data());
  // ------------------------------------------------------------------------


  // -----   Create media   -------------------------------------------------
  run->SetMaterials("media.geo");       // Materials
  // ------------------------------------------------------------------------


  // -----   Create detectors and passive volumes   -------------------------
  if ( caveGeom != "" ) {
    FairModule* cave = new CbmCave("CAVE");
    cave->SetGeometryFileName(caveGeom);
    run->AddModule(cave);
  }

  if ( pipeGeom != "" ) {
    FairModule* pipe = new CbmPipe("PIPE");
    pipe->SetGeometryFileName(pipeGeom);
    run->AddModule(pipe);
  }
  
  // --- Target
  CbmTarget* target = new CbmTarget(targetElement.Data(),
  		                              targetThickness,
  		                              targetDiameter);
  target->SetPosition(targetPosX, targetPosY, targetPosZ);
  target->SetRotation(targetRotY);
  run->AddModule(target);

  if ( magnetGeom != "" ) {
    FairModule* magnet = new CbmMagnet("MAGNET");
    magnet->SetGeometryFileName(magnetGeom);
    run->AddModule(magnet);
  }
  
  if ( platformGeom != "" ) {
    FairModule* platform = new CbmPlatform("PLATFORM");
    platform->SetGeometryFileName(platformGeom);
    run->AddModule(platform);
  }

  if ( mvdGeom != "" ) {
    FairDetector* mvd = new CbmMvd("MVD", kTRUE);
    mvd->SetGeometryFileName(mvdGeom);
    mvd->SetMotherVolume("pipevac1");
    run->AddModule(mvd);
  }

  if ( stsGeom != "" ) {
    FairDetector* sts = new CbmStsMC(kTRUE);
    sts->SetGeometryFileName(stsGeom);
    run->AddModule(sts);
  }

  if ( richGeom != "" ) {
    FairDetector* rich = new CbmRich("RICH", kTRUE);
    rich->SetGeometryFileName(richGeom);
    run->AddModule(rich);
  }
  
  if ( muchGeom != "" ) {
    FairDetector* much = new CbmMuch("MUCH", kTRUE);
    much->SetGeometryFileName(muchGeom);
    run->AddModule(much);
  }
  
  if ( shieldGeom != "" ) {
  	FairModule* shield = new CbmShield("SHIELD");
  	shield->SetGeometryFileName(shieldGeom);
  	run->AddModule(shield);
  }

  if ( trdGeom != "" ) {
    FairDetector* trd = new CbmTrd("TRD",kTRUE );
    trd->SetGeometryFileName(trdGeom);
    run->AddModule(trd);
  }

  if ( tofGeom != "" ) {
    FairDetector* tof = new CbmTof("TOF", kTRUE);
    tof->SetGeometryFileName(tofGeom);
    run->AddModule(tof);
  }
  
  if ( ecalGeom != "" ) {
    FairDetector* ecal = new CbmEcal("ECAL", kTRUE, ecalGeom.Data()); 
    run->AddModule(ecal);
  }

  
//   if ( psdGeom != "" ) {
    TString geoFileNamePsd = outDir + "geo/psd_geo_xy_" + sfileNum + ".txt";
    cout << "Constructing PSD" << endl;
//   	CbmPsdv1* psd= new CbmPsdv1("PSD", kTRUE);  
    CbmPsdTest* psd= new CbmPsdTest("PSD", kTRUE);
    psd->SetZposition(psdZpos); // in cm
    psd->SetXshift(psdXpos);  // in cm    
    psd->SetGeoFile(geoFileNamePsd);  
    psd->SetHoleSize(6);
    run->AddModule(psd);
//   }
  
  // ------------------------------------------------------------------------

  // -----   Create magnetic field   ----------------------------------------
  CbmFieldMap* magField = NULL;
  if ( 2 == fieldSymType ) {
    magField = new CbmFieldMapSym2(fieldMap);
  }  else if ( 3 == fieldSymType ) {
    magField = new CbmFieldMapSym3(fieldMap);
  } 
  magField->SetPosition(0., 0., fieldZ);
  magField->SetScale(fieldScale);
  run->SetField(magField);
  // ------------------------------------------------------------------------


  // -----   Create PrimaryGenerator   --------------------------------------
  FairPrimaryGenerator* primGen = new FairPrimaryGenerator();
  // --- Uniform distribution of event plane angle
//   primGen->SetEventPlane(0., 2. * TMath::Pi());        //TODO (ask Vitaly) check event plane
  // --- Get target parameters
  Double_t tX = 0.;
  Double_t tY = 0.;
  Double_t tZ = 0.;
  Double_t tDz = 0.;
  if ( target ) {
  	target->GetPosition(tX, tY, tZ);
  	tDz = target->GetThickness();
  }
  primGen->SetTarget(tZ, tDz);
  primGen->SetBeam(0., 0., beamWidthX, beamWidthY);
  primGen->SmearGausVertexXY(smearVertexXY);
  primGen->SmearVertexZ(smearVertexZ);
  //
  // TODO: Currently, there is no guaranteed consistency of the beam profile
  // and the transversal target dimension, i.e., that the sampled primary
  // vertex falls into the target volume. This would require changes
  // in the FairPrimaryGenerator class.
  // ------------------------------------------------------------------------

  // Use the CbmUnigenGenrator for the input
  
    if (gen == 0) {
        CbmUnigenGenerator*  urqmdGen = new CbmUnigenGenerator(inFile);
        urqmdGen->SetEventPlane(-TMath::Pi(), TMath::Pi());
        primGen->AddGenerator(urqmdGen);
    }

    if (gen == 1) {
        CbmShieldGeneratorNew*  shieldGen = new CbmShieldGeneratorNew (inFile);
        primGen->AddGenerator(shieldGen);
    }  
  
  
  run->SetGenerator(primGen);
  // ------------------------------------------------------------------------

 
  // Visualisation of trajectories (TGeoManager Only)
  // Switch this on if you want to visualise tracks in the event display.
  // This is normally switch off, because of the huge files created
  // when it is switched on. 
  run->SetStoreTraj(kFALSE);

  // -----   Run initialisation   -------------------------------------------
  run->Init();
  // ------------------------------------------------------------------------
  
  // Set cuts for storing the trajectories.
  // Switch this on only if trajectories are stored.
  // Choose this cuts according to your needs, but be aware
  // that the file size of the output file depends on these cuts

   FairTrajFilter* trajFilter = FairTrajFilter::Instance();
   if ( trajFilter ) {
  	 trajFilter->SetStepSizeCut(0.01); // 1 cm
  	 trajFilter->SetVertexCut(-2000., -2000., 4., 2000., 2000., 100.);
  	 trajFilter->SetMomentumCutP(10e-3); // p_lab > 10 MeV
  	 trajFilter->SetEnergyCut(0., 1.02); // 0 < Etot < 1.04 GeV
  	 trajFilter->SetStorePrimaries(kTRUE);
  	 trajFilter->SetStoreSecondaries(kTRUE);
   }

  // -----   Runtime database   ---------------------------------------------
  CbmFieldPar* fieldPar = (CbmFieldPar*) rtdb->getContainer("CbmFieldPar");
  fieldPar->SetParameters(magField);
  fieldPar->setChanged();
  fieldPar->setInputVersion(run->GetRunId(),1);
  Bool_t kParameterMerged = kTRUE;
  FairParRootFileIo* parOut = new FairParRootFileIo(kParameterMerged);
  parOut->open(parFile.Data());
  rtdb->setOutput(parOut);
  rtdb->saveOutput();
  rtdb->print();
  // ------------------------------------------------------------------------

 
  // -----   Start run   ----------------------------------------------------
  run->Run(nEvents);
  // ------------------------------------------------------------------------
  run->CreateGeometryFile(geoFileName);

  // -----   Finish   -------------------------------------------------------
  timer.Stop();
  Double_t rtime = timer.RealTime();
  Double_t ctime = timer.CpuTime();
  std::cout << std::endl << std::endl;
  std::cout << "Macro finished successfully." << std::endl;
  std::cout << "Output file is "    << outFile << std::endl;
  std::cout << "Parameter file is " << parFile << std::endl;
  std::cout << "Real time " << rtime << " s, CPU time " << ctime
       << "s" << std::endl << std::endl;
  // ------------------------------------------------------------------------

  std::cout << " Test passed" << std::endl;
  std::cout << " All ok " << std::endl;

  // Function needed for CTest runtime dependency
//   Generate_CTest_Dependency_File(depFile);

}