void onEmitCode(EmitArgs& args, GrGPArgs* gpArgs) override {
const GrRRectShadowGeoProc& rsgp = args.fGP.cast<GrRRectShadowGeoProc>();
GrGLSLVertexBuilder* vertBuilder = args.fVertBuilder;
GrGLSLVaryingHandler* varyingHandler = args.fVaryingHandler;
GrGLSLUniformHandler* uniformHandler = args.fUniformHandler;
GrGLSLPPFragmentBuilder* fragBuilder = args.fFragBuilder;
// emit attributes
varyingHandler->emitAttributes(rsgp);
fragBuilder->codeAppend("vec4 shadowParams;");
varyingHandler->addPassThroughAttribute(rsgp.inShadowParams(), "shadowParams");
// setup pass through color
varyingHandler->addPassThroughAttribute(rsgp.inColor(), args.fOutputColor);
// Setup position
this->setupPosition(vertBuilder, gpArgs, rsgp.inPosition()->fName);
// emit transforms
this->emitTransforms(vertBuilder,
varyingHandler,
uniformHandler,
gpArgs->fPositionVar,
rsgp.inPosition()->fName,
args.fFPCoordTransformHandler);
fragBuilder->codeAppend("float d = length(shadowParams.xy);");
fragBuilder->codeAppend("float distance = shadowParams.z * (1.0 - d);");
fragBuilder->codeAppend("float factor = 1.0 - clamp(distance, 0.0, shadowParams.w);");
fragBuilder->codeAppend("factor = exp(-factor * factor * 4.0) - 0.018;");
fragBuilder->codeAppendf("%s = vec4(factor);",
args.fOutputCoverage);
}
void onEmitCode(EmitArgs& args, GrGPArgs* gpArgs) override {
const MSAAQuadProcessor& qp = args.fGP.cast<MSAAQuadProcessor>();
GrGLSLVertexBuilder* vsBuilder = args.fVertBuilder;
GrGLSLVaryingHandler* varyingHandler = args.fVaryingHandler;
GrGLSLUniformHandler* uniformHandler = args.fUniformHandler;
// emit attributes
varyingHandler->emitAttributes(qp);
varyingHandler->addPassThroughAttribute(qp.inColor(), args.fOutputColor);
GrGLSLVertToFrag uv(kVec2f_GrSLType);
varyingHandler->addVarying("uv", &uv, kHigh_GrSLPrecision);
vsBuilder->codeAppendf("%s = %s;", uv.vsOut(), qp.inUV()->fName);
// Setup position
this->setupPosition(vsBuilder, uniformHandler, gpArgs, qp.inPosition()->fName,
qp.viewMatrix(), &fViewMatrixUniform);
// emit transforms
this->emitTransforms(vsBuilder, varyingHandler, uniformHandler, gpArgs->fPositionVar,
qp.inPosition()->fName, SkMatrix::I(), args.fTransformsIn,
args.fTransformsOut);
GrGLSLPPFragmentBuilder* fsBuilder = args.fFragBuilder;
fsBuilder->codeAppendf("if (%s.x * %s.x >= %s.y) discard;", uv.fsIn(), uv.fsIn(),
uv.fsIn());
fsBuilder->codeAppendf("%s = vec4(1.0);", args.fOutputCoverage);
}
void onEmitCode(EmitArgs& args, GrGPArgs* gpArgs) override {
const GrBitmapTextGeoProc& btgp = args.fGP.cast<GrBitmapTextGeoProc>();
GrGLSLVertexBuilder* vertBuilder = args.fVertBuilder;
GrGLSLVaryingHandler* varyingHandler = args.fVaryingHandler;
GrGLSLUniformHandler* uniformHandler = args.fUniformHandler;
// emit attributes
varyingHandler->emitAttributes(btgp);
const char* atlasSizeInvName;
fAtlasSizeInvUniform = uniformHandler->addUniform(kVertex_GrShaderFlag,
kFloat2_GrSLType,
kHigh_GrSLPrecision,
"AtlasSizeInv",
&atlasSizeInvName);
GrGLSLVarying uv(kFloat2_GrSLType);
GrSLType texIdxType = args.fShaderCaps->integerSupport() ? kInt_GrSLType : kFloat_GrSLType;
GrGLSLVarying texIdx(texIdxType);
append_index_uv_varyings(args, btgp.inTextureCoords().name(), atlasSizeInvName, &uv,
&texIdx, nullptr);
GrGLSLFPFragmentBuilder* fragBuilder = args.fFragBuilder;
// Setup pass through color
if (btgp.hasVertexColor()) {
varyingHandler->addPassThroughAttribute(btgp.inColor(), args.fOutputColor);
} else {
this->setupUniformColor(fragBuilder, uniformHandler, args.fOutputColor,
&fColorUniform);
}
// Setup position
gpArgs->fPositionVar = btgp.inPosition().asShaderVar();
// emit transforms
this->emitTransforms(vertBuilder,
varyingHandler,
uniformHandler,
btgp.inPosition().asShaderVar(),
btgp.localMatrix(),
args.fFPCoordTransformHandler);
fragBuilder->codeAppend("half4 texColor;");
append_multitexture_lookup(args, btgp.numTextureSamplers(),
texIdx, uv.fsIn(), "texColor");
if (btgp.maskFormat() == kARGB_GrMaskFormat) {
// modulate by color
fragBuilder->codeAppendf("%s = %s * texColor;", args.fOutputColor, args.fOutputColor);
fragBuilder->codeAppendf("%s = half4(1);", args.fOutputCoverage);
} else {
fragBuilder->codeAppendf("%s = texColor;", args.fOutputCoverage);
}
}
void onEmitCode(EmitArgs& args, GrGPArgs* gpArgs) final {
const GrPipelineDynamicStateTestProcessor& mp =
args.fGP.cast<GrPipelineDynamicStateTestProcessor>();
GrGLSLVaryingHandler* varyingHandler = args.fVaryingHandler;
varyingHandler->emitAttributes(mp);
varyingHandler->addPassThroughAttribute(&mp.fColor, args.fOutputColor);
GrGLSLVertexBuilder* v = args.fVertBuilder;
v->codeAppendf("vec2 vertex = %s;", mp.fVertex.fName);
gpArgs->fPositionVar.set(kVec2f_GrSLType, "vertex");
GrGLSLPPFragmentBuilder* f = args.fFragBuilder;
f->codeAppendf("%s = vec4(1);", args.fOutputCoverage);
}
void onEmitCode(EmitArgs& args, GrGPArgs* gpArgs) override{
const GrDistanceFieldLCDTextGeoProc& dfTexEffect =
args.fGP.cast<GrDistanceFieldLCDTextGeoProc>();
GrGLSLVertexBuilder* vertBuilder = args.fVertBuilder;
GrGLSLVaryingHandler* varyingHandler = args.fVaryingHandler;
GrGLSLUniformHandler* uniformHandler = args.fUniformHandler;
// emit attributes
varyingHandler->emitAttributes(dfTexEffect);
GrGLSLPPFragmentBuilder* fragBuilder = args.fFragBuilder;
// setup pass through color
if (!dfTexEffect.colorIgnored()) {
varyingHandler->addPassThroughAttribute(dfTexEffect.inColor(), args.fOutputColor);
}
// Setup position
this->setupPosition(vertBuilder,
uniformHandler,
gpArgs,
dfTexEffect.inPosition()->fName,
dfTexEffect.viewMatrix(),
&fViewMatrixUniform);
// emit transforms
this->emitTransforms(vertBuilder,
varyingHandler,
uniformHandler,
gpArgs->fPositionVar,
dfTexEffect.inPosition()->fName,
args.fTransformsIn,
args.fTransformsOut);
// set up varyings
bool isUniformScale = (dfTexEffect.getFlags() & kUniformScale_DistanceFieldEffectMask) ==
kUniformScale_DistanceFieldEffectMask;
bool isSimilarity = SkToBool(dfTexEffect.getFlags() & kSimilarity_DistanceFieldEffectFlag);
GrGLSLVertToFrag recipScale(kFloat_GrSLType);
GrGLSLVertToFrag uv(kVec2f_GrSLType);
varyingHandler->addVarying("TextureCoords", &uv, kHigh_GrSLPrecision);
vertBuilder->codeAppendf("%s = %s;", uv.vsOut(), dfTexEffect.inTextureCoords()->fName);
// compute numbers to be hardcoded to convert texture coordinates from float to int
SkASSERT(dfTexEffect.numTextures() == 1);
GrTexture* atlas = dfTexEffect.textureAccess(0).getTexture();
SkASSERT(atlas && SkIsPow2(atlas->width()) && SkIsPow2(atlas->height()));
GrGLSLVertToFrag st(kVec2f_GrSLType);
varyingHandler->addVarying("IntTextureCoords", &st, kHigh_GrSLPrecision);
vertBuilder->codeAppendf("%s = vec2(%d, %d) * %s;", st.vsOut(),
atlas->width(), atlas->height(),
dfTexEffect.inTextureCoords()->fName);
// add frag shader code
SkAssertResult(fragBuilder->enableFeature(
GrGLSLFragmentShaderBuilder::kStandardDerivatives_GLSLFeature));
// create LCD offset adjusted by inverse of transform
// Use highp to work around aliasing issues
fragBuilder->codeAppend(GrGLSLShaderVar::PrecisionString(args.fGLSLCaps,
kHigh_GrSLPrecision));
fragBuilder->codeAppendf("vec2 uv = %s;\n", uv.fsIn());
fragBuilder->codeAppend(GrGLSLShaderVar::PrecisionString(args.fGLSLCaps,
kHigh_GrSLPrecision));
SkScalar lcdDelta = 1.0f / (3.0f * atlas->width());
if (dfTexEffect.getFlags() & kBGR_DistanceFieldEffectFlag) {
fragBuilder->codeAppendf("float delta = -%.*f;\n", SK_FLT_DECIMAL_DIG, lcdDelta);
} else {
fragBuilder->codeAppendf("float delta = %.*f;\n", SK_FLT_DECIMAL_DIG, lcdDelta);
}
if (isUniformScale) {
fragBuilder->codeAppendf("float st_grad_len = abs(dFdy(%s.y));", st.fsIn());
fragBuilder->codeAppend("vec2 offset = vec2(st_grad_len*delta, 0.0);");
} else if (isSimilarity) {
// For a similarity matrix with rotation, the gradient will not be aligned
// with the texel coordinate axes, so we need to calculate it.
// We use dFdy because of a Mali 400 bug, and rotate -90 degrees to
// get the gradient in the x direction.
fragBuilder->codeAppendf("vec2 st_grad = dFdy(%s);", st.fsIn());
fragBuilder->codeAppend("float st_grad_len = length(st_grad);");
fragBuilder->codeAppend("vec2 offset = delta*vec2(st_grad.y, -st_grad.x);");
} else {
fragBuilder->codeAppendf("vec2 st = %s;\n", st.fsIn());
fragBuilder->codeAppend("vec2 Jdx = dFdx(st);");
fragBuilder->codeAppend("vec2 Jdy = dFdy(st);");
fragBuilder->codeAppend("vec2 offset = delta*Jdx;");
}
// green is distance to uv center
fragBuilder->codeAppend("\tvec4 texColor = ");
fragBuilder->appendTextureLookup(args.fSamplers[0], "uv", kVec2f_GrSLType);
fragBuilder->codeAppend(";\n");
fragBuilder->codeAppend("\tvec3 distance;\n");
fragBuilder->codeAppend("\tdistance.y = texColor.r;\n");
// red is distance to left offset
fragBuilder->codeAppend("\tvec2 uv_adjusted = uv - offset;\n");
fragBuilder->codeAppend("\ttexColor = ");
fragBuilder->appendTextureLookup(args.fSamplers[0], "uv_adjusted", kVec2f_GrSLType);
fragBuilder->codeAppend(";\n");
fragBuilder->codeAppend("\tdistance.x = texColor.r;\n");
// blue is distance to right offset
fragBuilder->codeAppend("\tuv_adjusted = uv + offset;\n");
fragBuilder->codeAppend("\ttexColor = ");
fragBuilder->appendTextureLookup(args.fSamplers[0], "uv_adjusted", kVec2f_GrSLType);
fragBuilder->codeAppend(";\n");
fragBuilder->codeAppend("\tdistance.z = texColor.r;\n");
fragBuilder->codeAppend("\tdistance = "
"vec3(" SK_DistanceFieldMultiplier ")*(distance - vec3(" SK_DistanceFieldThreshold"));");
// adjust width based on gamma
const char* distanceAdjustUniName = nullptr;
fDistanceAdjustUni = uniformHandler->addUniform(kFragment_GrShaderFlag,
kVec3f_GrSLType, kDefault_GrSLPrecision,
"DistanceAdjust", &distanceAdjustUniName);
fragBuilder->codeAppendf("distance -= %s;", distanceAdjustUniName);
// To be strictly correct, we should compute the anti-aliasing factor separately
// for each color component. However, this is only important when using perspective
// transformations, and even then using a single factor seems like a reasonable
// trade-off between quality and speed.
fragBuilder->codeAppend("float afwidth;");
if (isSimilarity) {
// For similarity transform (uniform scale-only is a subset of this), we adjust for the
// effect of the transformation on the distance by using the length of the gradient of
// the texture coordinates. We use st coordinates to ensure we're mapping 1:1 from texel
// space to pixel space.
// this gives us a smooth step across approximately one fragment
fragBuilder->codeAppend("afwidth = " SK_DistanceFieldAAFactor "*st_grad_len;");
} else {
// For general transforms, to determine the amount of correction we multiply a unit
// vector pointing along the SDF gradient direction by the Jacobian of the st coords
// (which is the inverse transform for this fragment) and take the length of the result.
fragBuilder->codeAppend("vec2 dist_grad = vec2(dFdx(distance.r), dFdy(distance.r));");
// the length of the gradient may be 0, so we need to check for this
// this also compensates for the Adreno, which likes to drop tiles on division by 0
fragBuilder->codeAppend("float dg_len2 = dot(dist_grad, dist_grad);");
fragBuilder->codeAppend("if (dg_len2 < 0.0001) {");
fragBuilder->codeAppend("dist_grad = vec2(0.7071, 0.7071);");
fragBuilder->codeAppend("} else {");
fragBuilder->codeAppend("dist_grad = dist_grad*inversesqrt(dg_len2);");
fragBuilder->codeAppend("}");
fragBuilder->codeAppend("vec2 grad = vec2(dist_grad.x*Jdx.x + dist_grad.y*Jdy.x,");
fragBuilder->codeAppend(" dist_grad.x*Jdx.y + dist_grad.y*Jdy.y);");
// this gives us a smooth step across approximately one fragment
fragBuilder->codeAppend("afwidth = " SK_DistanceFieldAAFactor "*length(grad);");
}
fragBuilder->codeAppend(
"vec4 val = vec4(smoothstep(vec3(-afwidth), vec3(afwidth), distance), 1.0);");
// set alpha to be max of rgb coverage
fragBuilder->codeAppend("val.a = max(max(val.r, val.g), val.b);");
fragBuilder->codeAppendf("%s = val;", args.fOutputCoverage);
}
void onEmitCode(EmitArgs& args, GrGPArgs* gpArgs) override{
const GrDistanceFieldA8TextGeoProc& dfTexEffect =
args.fGP.cast<GrDistanceFieldA8TextGeoProc>();
GrGLSLPPFragmentBuilder* fragBuilder = args.fFragBuilder;
SkAssertResult(fragBuilder->enableFeature(
GrGLSLFragmentShaderBuilder::kStandardDerivatives_GLSLFeature));
GrGLSLVertexBuilder* vertBuilder = args.fVertBuilder;
GrGLSLVaryingHandler* varyingHandler = args.fVaryingHandler;
GrGLSLUniformHandler* uniformHandler = args.fUniformHandler;
// emit attributes
varyingHandler->emitAttributes(dfTexEffect);
#ifdef SK_GAMMA_APPLY_TO_A8
// adjust based on gamma
const char* distanceAdjustUniName = nullptr;
// width, height, 1/(3*width)
fDistanceAdjustUni = uniformHandler->addUniform(kFragment_GrShaderFlag,
kFloat_GrSLType, kDefault_GrSLPrecision,
"DistanceAdjust", &distanceAdjustUniName);
#endif
// Setup pass through color
if (!dfTexEffect.colorIgnored()) {
varyingHandler->addPassThroughAttribute(dfTexEffect.inColor(), args.fOutputColor);
}
// Setup position
this->setupPosition(vertBuilder,
uniformHandler,
gpArgs,
dfTexEffect.inPosition()->fName,
dfTexEffect.viewMatrix(),
&fViewMatrixUniform);
// emit transforms
this->emitTransforms(vertBuilder,
varyingHandler,
uniformHandler,
gpArgs->fPositionVar,
dfTexEffect.inPosition()->fName,
args.fTransformsIn,
args.fTransformsOut);
// add varyings
GrGLSLVertToFrag recipScale(kFloat_GrSLType);
GrGLSLVertToFrag uv(kVec2f_GrSLType);
bool isUniformScale = (dfTexEffect.getFlags() & kUniformScale_DistanceFieldEffectMask) ==
kUniformScale_DistanceFieldEffectMask;
bool isSimilarity = SkToBool(dfTexEffect.getFlags() & kSimilarity_DistanceFieldEffectFlag);
varyingHandler->addVarying("TextureCoords", &uv, kHigh_GrSLPrecision);
vertBuilder->codeAppendf("%s = %s;", uv.vsOut(), dfTexEffect.inTextureCoords()->fName);
// compute numbers to be hardcoded to convert texture coordinates from float to int
SkASSERT(dfTexEffect.numTextures() == 1);
GrTexture* atlas = dfTexEffect.textureAccess(0).getTexture();
SkASSERT(atlas && SkIsPow2(atlas->width()) && SkIsPow2(atlas->height()));
GrGLSLVertToFrag st(kVec2f_GrSLType);
varyingHandler->addVarying("IntTextureCoords", &st, kHigh_GrSLPrecision);
vertBuilder->codeAppendf("%s = vec2(%d, %d) * %s;", st.vsOut(),
atlas->width(), atlas->height(),
dfTexEffect.inTextureCoords()->fName);
// Use highp to work around aliasing issues
fragBuilder->codeAppend(GrGLSLShaderVar::PrecisionString(args.fGLSLCaps,
kHigh_GrSLPrecision));
fragBuilder->codeAppendf("vec2 uv = %s;\n", uv.fsIn());
fragBuilder->codeAppend("\tfloat texColor = ");
fragBuilder->appendTextureLookup(args.fSamplers[0],
"uv",
kVec2f_GrSLType);
fragBuilder->codeAppend(".r;\n");
fragBuilder->codeAppend("\tfloat distance = "
SK_DistanceFieldMultiplier "*(texColor - " SK_DistanceFieldThreshold ");");
#ifdef SK_GAMMA_APPLY_TO_A8
// adjust width based on gamma
fragBuilder->codeAppendf("distance -= %s;", distanceAdjustUniName);
#endif
fragBuilder->codeAppend("float afwidth;");
if (isUniformScale) {
// For uniform scale, we adjust for the effect of the transformation on the distance
// by using the length of the gradient of the t coordinate in the y direction.
// We use st coordinates to ensure we're mapping 1:1 from texel space to pixel space.
// We use the y gradient because there is a bug in the Mali 400 in the x direction.
// this gives us a smooth step across approximately one fragment
fragBuilder->codeAppendf("afwidth = abs(" SK_DistanceFieldAAFactor "*dFdy(%s.y));",
st.fsIn());
} else if (isSimilarity) {
// For similarity transform, we adjust the effect of the transformation on the distance
// by using the length of the gradient of the texture coordinates. We use st coordinates
// to ensure we're mapping 1:1 from texel space to pixel space.
// We use the y gradient because there is a bug in the Mali 400 in the x direction.
// this gives us a smooth step across approximately one fragment
fragBuilder->codeAppendf("float st_grad_len = length(dFdy(%s));", st.fsIn());
fragBuilder->codeAppend("afwidth = abs(" SK_DistanceFieldAAFactor "*st_grad_len);");
} else {
// For general transforms, to determine the amount of correction we multiply a unit
// vector pointing along the SDF gradient direction by the Jacobian of the st coords
// (which is the inverse transform for this fragment) and take the length of the result.
fragBuilder->codeAppend("vec2 dist_grad = vec2(dFdx(distance), dFdy(distance));");
// the length of the gradient may be 0, so we need to check for this
// this also compensates for the Adreno, which likes to drop tiles on division by 0
fragBuilder->codeAppend("float dg_len2 = dot(dist_grad, dist_grad);");
fragBuilder->codeAppend("if (dg_len2 < 0.0001) {");
fragBuilder->codeAppend("dist_grad = vec2(0.7071, 0.7071);");
fragBuilder->codeAppend("} else {");
fragBuilder->codeAppend("dist_grad = dist_grad*inversesqrt(dg_len2);");
fragBuilder->codeAppend("}");
fragBuilder->codeAppendf("vec2 Jdx = dFdx(%s);", st.fsIn());
fragBuilder->codeAppendf("vec2 Jdy = dFdy(%s);", st.fsIn());
fragBuilder->codeAppend("vec2 grad = vec2(dist_grad.x*Jdx.x + dist_grad.y*Jdy.x,");
fragBuilder->codeAppend(" dist_grad.x*Jdx.y + dist_grad.y*Jdy.y);");
// this gives us a smooth step across approximately one fragment
fragBuilder->codeAppend("afwidth = " SK_DistanceFieldAAFactor "*length(grad);");
}
fragBuilder->codeAppend("float val = smoothstep(-afwidth, afwidth, distance);");
fragBuilder->codeAppendf("%s = vec4(val);", args.fOutputCoverage);
}
void onEmitCode(EmitArgs& args, GrGPArgs* gpArgs) override {
const DefaultGeoProc& gp = args.fGP.cast<DefaultGeoProc>();
GrGLSLVertexBuilder* vertBuilder = args.fVertBuilder;
GrGLSLFPFragmentBuilder* fragBuilder = args.fFragBuilder;
GrGLSLVaryingHandler* varyingHandler = args.fVaryingHandler;
GrGLSLUniformHandler* uniformHandler = args.fUniformHandler;
// emit attributes
varyingHandler->emitAttributes(gp);
// Setup pass through color
if (gp.hasVertexColor()) {
GrGLSLVarying varying(kHalf4_GrSLType);
varyingHandler->addVarying("color", &varying);
// There are several optional steps to process the color. Start with the attribute:
vertBuilder->codeAppendf("half4 color = %s;", gp.inColor()->fName);
// Linearize
if (gp.linearizeColor()) {
SkString srgbFuncName;
static const GrShaderVar gSrgbArgs[] = {
GrShaderVar("x", kHalf_GrSLType),
};
vertBuilder->emitFunction(kHalf_GrSLType,
"srgb_to_linear",
SK_ARRAY_COUNT(gSrgbArgs),
gSrgbArgs,
"return (x <= 0.04045) ? (x / 12.92) "
": pow((x + 0.055) / 1.055, 2.4);",
&srgbFuncName);
vertBuilder->codeAppendf("color = half4(%s(%s.r), %s(%s.g), %s(%s.b), %s.a);",
srgbFuncName.c_str(), gp.inColor()->fName,
srgbFuncName.c_str(), gp.inColor()->fName,
srgbFuncName.c_str(), gp.inColor()->fName,
gp.inColor()->fName);
}
// For SkColor, do a red/blue swap and premul
if (gp.fFlags & kColorAttributeIsSkColor_GPFlag) {
vertBuilder->codeAppend("color = half4(color.a * color.bgr, color.a);");
}
// Do color-correction to destination gamut
if (gp.linearizeColor()) {
fColorSpaceHelper.emitCode(uniformHandler, gp.fColorSpaceXform.get(),
kVertex_GrShaderFlag);
if (fColorSpaceHelper.isValid()) {
SkString xformedColor;
vertBuilder->appendColorGamutXform(&xformedColor, "color",
&fColorSpaceHelper);
vertBuilder->codeAppendf("color = %s;", xformedColor.c_str());
}
}
vertBuilder->codeAppendf("%s = color;\n", varying.vsOut());
fragBuilder->codeAppendf("%s = %s;", args.fOutputColor, varying.fsIn());
} else {
this->setupUniformColor(fragBuilder, uniformHandler, args.fOutputColor,
&fColorUniform);
}
// Setup position
this->writeOutputPosition(vertBuilder,
uniformHandler,
gpArgs,
gp.inPosition()->fName,
gp.viewMatrix(),
&fViewMatrixUniform);
if (gp.hasExplicitLocalCoords()) {
// emit transforms with explicit local coords
this->emitTransforms(vertBuilder,
varyingHandler,
uniformHandler,
gp.inLocalCoords()->asShaderVar(),
gp.localMatrix(),
args.fFPCoordTransformHandler);
} else {
// emit transforms with position
this->emitTransforms(vertBuilder,
varyingHandler,
uniformHandler,
gp.inPosition()->asShaderVar(),
gp.localMatrix(),
args.fFPCoordTransformHandler);
}
// Setup coverage as pass through
if (gp.hasVertexCoverage()) {
fragBuilder->codeAppendf("half alpha = 1.0;");
varyingHandler->addPassThroughAttribute(gp.inCoverage(), "alpha");
fragBuilder->codeAppendf("%s = half4(alpha);", args.fOutputCoverage);
} else if (gp.coverage() == 0xff) {
fragBuilder->codeAppendf("%s = half4(1);", args.fOutputCoverage);
} else {
const char* fragCoverage;
fCoverageUniform = uniformHandler->addUniform(kFragment_GrShaderFlag,
kHalf_GrSLType,
"Coverage",
&fragCoverage);
fragBuilder->codeAppendf("%s = half4(%s);", args.fOutputCoverage, fragCoverage);
}
}
void onEmitCode(EmitArgs& args, GrGPArgs* gpArgs) override {
const DefaultGeoProc& gp = args.fGP.cast<DefaultGeoProc>();
GrGLSLVertexBuilder* vertBuilder = args.fVertBuilder;
GrGLSLPPFragmentBuilder* fragBuilder = args.fFragBuilder;
GrGLSLVaryingHandler* varyingHandler = args.fVaryingHandler;
GrGLSLUniformHandler* uniformHandler = args.fUniformHandler;
// emit attributes
varyingHandler->emitAttributes(gp);
// Setup pass through color
if (!gp.colorIgnored()) {
if (gp.hasVertexColor()) {
varyingHandler->addPassThroughAttribute(gp.inColor(), args.fOutputColor);
} else {
this->setupUniformColor(fragBuilder, uniformHandler, args.fOutputColor,
&fColorUniform);
}
}
// Setup position
this->setupPosition(vertBuilder,
uniformHandler,
gpArgs,
gp.inPosition()->fName,
gp.viewMatrix(),
&fViewMatrixUniform);
if (gp.hasExplicitLocalCoords()) {
// emit transforms with explicit local coords
this->emitTransforms(vertBuilder,
varyingHandler,
uniformHandler,
gpArgs->fPositionVar,
gp.inLocalCoords()->fName,
gp.localMatrix(),
args.fTransformsIn,
args.fTransformsOut);
} else if(gp.hasTransformedLocalCoords()) {
// transforms have already been applied to vertex attributes on the cpu
this->emitTransforms(vertBuilder,
varyingHandler,
gp.inLocalCoords()->fName,
args.fTransformsIn,
args.fTransformsOut);
} else {
// emit transforms with position
this->emitTransforms(vertBuilder,
varyingHandler,
uniformHandler,
gpArgs->fPositionVar,
gp.inPosition()->fName,
gp.localMatrix(),
args.fTransformsIn,
args.fTransformsOut);
}
// Setup coverage as pass through
if (!gp.coverageWillBeIgnored()) {
if (gp.hasVertexCoverage()) {
fragBuilder->codeAppendf("float alpha = 1.0;");
varyingHandler->addPassThroughAttribute(gp.inCoverage(), "alpha");
fragBuilder->codeAppendf("%s = vec4(alpha);", args.fOutputCoverage);
} else if (gp.coverage() == 0xff) {
fragBuilder->codeAppendf("%s = vec4(1);", args.fOutputCoverage);
} else {
const char* fragCoverage;
fCoverageUniform = uniformHandler->addUniform(kFragment_GrShaderFlag,
kFloat_GrSLType,
kDefault_GrSLPrecision,
"Coverage",
&fragCoverage);
fragBuilder->codeAppendf("%s = vec4(%s);", args.fOutputCoverage, fragCoverage);
}
}
}
void onEmitCode(EmitArgs& args, GrGPArgs* gpArgs) override {
const GrBitmapTextGeoProc& cte = args.fGP.cast<GrBitmapTextGeoProc>();
GrGLSLVertexBuilder* vertBuilder = args.fVertBuilder;
GrGLSLVaryingHandler* varyingHandler = args.fVaryingHandler;
GrGLSLUniformHandler* uniformHandler = args.fUniformHandler;
// emit attributes
varyingHandler->emitAttributes(cte);
// compute numbers to be hardcoded to convert texture coordinates from int to float
SkASSERT(cte.numTextures() == 1);
SkDEBUGCODE(GrTexture* atlas = cte.textureAccess(0).getTexture());
SkASSERT(atlas && SkIsPow2(atlas->width()) && SkIsPow2(atlas->height()));
GrGLSLVertToFrag v(kVec2f_GrSLType);
varyingHandler->addVarying("TextureCoords", &v, kHigh_GrSLPrecision);
vertBuilder->codeAppendf("%s = %s;", v.vsOut(),
cte.inTextureCoords()->fName);
GrGLSLPPFragmentBuilder* fragBuilder = args.fFragBuilder;
// Setup pass through color
if (!cte.colorIgnored()) {
if (cte.hasVertexColor()) {
varyingHandler->addPassThroughAttribute(cte.inColor(), args.fOutputColor);
} else {
this->setupUniformColor(fragBuilder, uniformHandler, args.fOutputColor,
&fColorUniform);
}
}
// Setup position
this->setupPosition(vertBuilder, gpArgs, cte.inPosition()->fName);
// emit transforms
this->emitTransforms(vertBuilder,
varyingHandler,
uniformHandler,
gpArgs->fPositionVar,
cte.inPosition()->fName,
cte.localMatrix(),
args.fTransformsIn,
args.fTransformsOut);
if (cte.maskFormat() == kARGB_GrMaskFormat) {
fragBuilder->codeAppendf("%s = ", args.fOutputColor);
fragBuilder->appendTextureLookupAndModulate(args.fOutputColor,
args.fTexSamplers[0],
v.fsIn(),
kVec2f_GrSLType);
fragBuilder->codeAppend(";");
fragBuilder->codeAppendf("%s = vec4(1);", args.fOutputCoverage);
} else {
fragBuilder->codeAppendf("%s = ", args.fOutputCoverage);
fragBuilder->appendTextureLookup(args.fTexSamplers[0], v.fsIn(), kVec2f_GrSLType);
fragBuilder->codeAppend(";");
if (cte.maskFormat() == kA565_GrMaskFormat) {
// set alpha to be max of rgb coverage
fragBuilder->codeAppendf("%s.a = max(max(%s.r, %s.g), %s.b);",
args.fOutputCoverage, args.fOutputCoverage,
args.fOutputCoverage, args.fOutputCoverage);
}
}
}
void onEmitCode(EmitArgs& args, GrGPArgs* gpArgs) override{
const GrDistanceFieldPathGeoProc& dfTexEffect = args.fGP.cast<GrDistanceFieldPathGeoProc>();
GrGLSLFragmentBuilder* fragBuilder = args.fFragBuilder;
SkAssertResult(fragBuilder->enableFeature(
GrGLSLFragmentShaderBuilder::kStandardDerivatives_GLSLFeature));
GrGLSLVertexBuilder* vertBuilder = args.fVertBuilder;
GrGLSLVaryingHandler* varyingHandler = args.fVaryingHandler;
GrGLSLUniformHandler* uniformHandler = args.fUniformHandler;
// emit attributes
varyingHandler->emitAttributes(dfTexEffect);
GrGLSLVertToFrag v(kVec2f_GrSLType);
varyingHandler->addVarying("TextureCoords", &v, kHigh_GrSLPrecision);
// setup pass through color
if (!dfTexEffect.colorIgnored()) {
varyingHandler->addPassThroughAttribute(dfTexEffect.inColor(), args.fOutputColor);
}
vertBuilder->codeAppendf("%s = %s;", v.vsOut(), dfTexEffect.inTextureCoords()->fName);
// Setup position
this->setupPosition(vertBuilder,
uniformHandler,
gpArgs,
dfTexEffect.inPosition()->fName,
dfTexEffect.viewMatrix(),
&fViewMatrixUniform);
// emit transforms
this->emitTransforms(vertBuilder,
varyingHandler,
uniformHandler,
gpArgs->fPositionVar,
dfTexEffect.inPosition()->fName,
args.fTransformsIn,
args.fTransformsOut);
const char* textureSizeUniName = nullptr;
fTextureSizeUni = uniformHandler->addUniform(GrGLSLUniformHandler::kFragment_Visibility,
kVec2f_GrSLType, kDefault_GrSLPrecision,
"TextureSize", &textureSizeUniName);
// Use highp to work around aliasing issues
fragBuilder->codeAppend(GrGLSLShaderVar::PrecisionString(args.fGLSLCaps,
kHigh_GrSLPrecision));
fragBuilder->codeAppendf("vec2 uv = %s;", v.fsIn());
fragBuilder->codeAppend("float texColor = ");
fragBuilder->appendTextureLookup(args.fSamplers[0],
"uv",
kVec2f_GrSLType);
fragBuilder->codeAppend(".r;");
fragBuilder->codeAppend("float distance = "
SK_DistanceFieldMultiplier "*(texColor - " SK_DistanceFieldThreshold ");");
fragBuilder->codeAppend(GrGLSLShaderVar::PrecisionString(args.fGLSLCaps,
kHigh_GrSLPrecision));
fragBuilder->codeAppendf("vec2 st = uv*%s;", textureSizeUniName);
fragBuilder->codeAppend("float afwidth;");
if (dfTexEffect.getFlags() & kSimilarity_DistanceFieldEffectFlag) {
// For uniform scale, we adjust for the effect of the transformation on the distance
// by using the length of the gradient of the texture coordinates. We use st coordinates
// to ensure we're mapping 1:1 from texel space to pixel space.
// this gives us a smooth step across approximately one fragment
fragBuilder->codeAppend("afwidth = abs(" SK_DistanceFieldAAFactor "*dFdy(st.y));");
} else {
// For general transforms, to determine the amount of correction we multiply a unit
// vector pointing along the SDF gradient direction by the Jacobian of the st coords
// (which is the inverse transform for this fragment) and take the length of the result.
fragBuilder->codeAppend("vec2 dist_grad = vec2(dFdx(distance), dFdy(distance));");
// the length of the gradient may be 0, so we need to check for this
// this also compensates for the Adreno, which likes to drop tiles on division by 0
fragBuilder->codeAppend("float dg_len2 = dot(dist_grad, dist_grad);");
fragBuilder->codeAppend("if (dg_len2 < 0.0001) {");
fragBuilder->codeAppend("dist_grad = vec2(0.7071, 0.7071);");
fragBuilder->codeAppend("} else {");
fragBuilder->codeAppend("dist_grad = dist_grad*inversesqrt(dg_len2);");
fragBuilder->codeAppend("}");
fragBuilder->codeAppend("vec2 Jdx = dFdx(st);");
fragBuilder->codeAppend("vec2 Jdy = dFdy(st);");
fragBuilder->codeAppend("vec2 grad = vec2(dist_grad.x*Jdx.x + dist_grad.y*Jdy.x,");
fragBuilder->codeAppend(" dist_grad.x*Jdx.y + dist_grad.y*Jdy.y);");
// this gives us a smooth step across approximately one fragment
fragBuilder->codeAppend("afwidth = " SK_DistanceFieldAAFactor "*length(grad);");
}
fragBuilder->codeAppend("float val = smoothstep(-afwidth, afwidth, distance);");
fragBuilder->codeAppendf("%s = vec4(val);", args.fOutputCoverage);
}
void onEmitCode(EmitArgs& args, GrGPArgs* gpArgs) override{
const GrDistanceFieldPathGeoProc& dfTexEffect = args.fGP.cast<GrDistanceFieldPathGeoProc>();
GrGLSLPPFragmentBuilder* fragBuilder = args.fFragBuilder;
SkAssertResult(fragBuilder->enableFeature(
GrGLSLFragmentShaderBuilder::kStandardDerivatives_GLSLFeature));
GrGLSLVertexBuilder* vertBuilder = args.fVertBuilder;
GrGLSLVaryingHandler* varyingHandler = args.fVaryingHandler;
GrGLSLUniformHandler* uniformHandler = args.fUniformHandler;
// emit attributes
varyingHandler->emitAttributes(dfTexEffect);
GrGLSLVertToFrag v(kVec2f_GrSLType);
varyingHandler->addVarying("TextureCoords", &v, kHigh_GrSLPrecision);
// setup pass through color
if (!dfTexEffect.colorIgnored()) {
varyingHandler->addPassThroughAttribute(dfTexEffect.inColor(), args.fOutputColor);
}
vertBuilder->codeAppendf("%s = %s;", v.vsOut(), dfTexEffect.inTextureCoords()->fName);
// Setup position
this->setupPosition(vertBuilder,
uniformHandler,
gpArgs,
dfTexEffect.inPosition()->fName,
dfTexEffect.viewMatrix(),
&fViewMatrixUniform);
// emit transforms
this->emitTransforms(vertBuilder,
varyingHandler,
uniformHandler,
gpArgs->fPositionVar,
dfTexEffect.inPosition()->fName,
args.fFPCoordTransformHandler);
const char* textureSizeUniName = nullptr;
fTextureSizeUni = uniformHandler->addUniform(kFragment_GrShaderFlag,
kVec2f_GrSLType, kDefault_GrSLPrecision,
"TextureSize", &textureSizeUniName);
// Use highp to work around aliasing issues
fragBuilder->appendPrecisionModifier(kHigh_GrSLPrecision);
fragBuilder->codeAppendf("vec2 uv = %s;", v.fsIn());
fragBuilder->codeAppend("float texColor = ");
fragBuilder->appendTextureLookup(args.fTexSamplers[0],
"uv",
kVec2f_GrSLType);
fragBuilder->codeAppend(".r;");
fragBuilder->codeAppend("float distance = "
SK_DistanceFieldMultiplier "*(texColor - " SK_DistanceFieldThreshold ");");
fragBuilder->appendPrecisionModifier(kHigh_GrSLPrecision);
fragBuilder->codeAppendf("vec2 st = uv*%s;", textureSizeUniName);
fragBuilder->codeAppend("float afwidth;");
bool isUniformScale = (dfTexEffect.getFlags() & kUniformScale_DistanceFieldEffectMask) ==
kUniformScale_DistanceFieldEffectMask;
bool isSimilarity = SkToBool(dfTexEffect.getFlags() & kSimilarity_DistanceFieldEffectFlag);
bool isGammaCorrect =
SkToBool(dfTexEffect.getFlags() & kGammaCorrect_DistanceFieldEffectFlag);
if (isUniformScale) {
// For uniform scale, we adjust for the effect of the transformation on the distance
// by using the length of the gradient of the t coordinate in the y direction.
// We use st coordinates to ensure we're mapping 1:1 from texel space to pixel space.
// this gives us a smooth step across approximately one fragment
#ifdef SK_VULKAN
fragBuilder->codeAppend("afwidth = abs(" SK_DistanceFieldAAFactor "*dFdx(st.x));");
#else
// We use the y gradient because there is a bug in the Mali 400 in the x direction.
fragBuilder->codeAppend("afwidth = abs(" SK_DistanceFieldAAFactor "*dFdy(st.y));");
#endif
} else if (isSimilarity) {
// For similarity transform, we adjust the effect of the transformation on the distance
// by using the length of the gradient of the texture coordinates. We use st coordinates
// to ensure we're mapping 1:1 from texel space to pixel space.
// this gives us a smooth step across approximately one fragment
#ifdef SK_VULKAN
fragBuilder->codeAppend("float st_grad_len = length(dFdx(st));");
#else
// We use the y gradient because there is a bug in the Mali 400 in the x direction.
fragBuilder->codeAppend("float st_grad_len = length(dFdy(st));");
#endif
fragBuilder->codeAppend("afwidth = abs(" SK_DistanceFieldAAFactor "*st_grad_len);");
} else {
// For general transforms, to determine the amount of correction we multiply a unit
// vector pointing along the SDF gradient direction by the Jacobian of the st coords
// (which is the inverse transform for this fragment) and take the length of the result.
fragBuilder->codeAppend("vec2 dist_grad = vec2(dFdx(distance), dFdy(distance));");
// the length of the gradient may be 0, so we need to check for this
// this also compensates for the Adreno, which likes to drop tiles on division by 0
fragBuilder->codeAppend("float dg_len2 = dot(dist_grad, dist_grad);");
fragBuilder->codeAppend("if (dg_len2 < 0.0001) {");
fragBuilder->codeAppend("dist_grad = vec2(0.7071, 0.7071);");
fragBuilder->codeAppend("} else {");
fragBuilder->codeAppend("dist_grad = dist_grad*inversesqrt(dg_len2);");
fragBuilder->codeAppend("}");
fragBuilder->codeAppend("vec2 Jdx = dFdx(st);");
fragBuilder->codeAppend("vec2 Jdy = dFdy(st);");
fragBuilder->codeAppend("vec2 grad = vec2(dist_grad.x*Jdx.x + dist_grad.y*Jdy.x,");
fragBuilder->codeAppend(" dist_grad.x*Jdx.y + dist_grad.y*Jdy.y);");
// this gives us a smooth step across approximately one fragment
fragBuilder->codeAppend("afwidth = " SK_DistanceFieldAAFactor "*length(grad);");
}
// The smoothstep falloff compensates for the non-linear sRGB response curve. If we are
// doing gamma-correct rendering (to an sRGB or F16 buffer), then we actually want distance
// mapped linearly to coverage, so use a linear step:
if (isGammaCorrect) {
fragBuilder->codeAppend(
"float val = clamp(distance + afwidth / (2.0 * afwidth), 0.0, 1.0);");
} else {
fragBuilder->codeAppend("float val = smoothstep(-afwidth, afwidth, distance);");
}
fragBuilder->codeAppendf("%s = vec4(val);", args.fOutputCoverage);
}
void onEmitCode(EmitArgs& args, GrGPArgs* gpArgs) override{
const GrDistanceFieldLCDTextGeoProc& dfTexEffect =
args.fGP.cast<GrDistanceFieldLCDTextGeoProc>();
GrGLSLVertexBuilder* vertBuilder = args.fVertBuilder;
GrGLSLVaryingHandler* varyingHandler = args.fVaryingHandler;
GrGLSLUniformHandler* uniformHandler = args.fUniformHandler;
// emit attributes
varyingHandler->emitAttributes(dfTexEffect);
const char* atlasSizeInvName;
fAtlasSizeInvUniform = uniformHandler->addUniform(kVertex_GrShaderFlag,
kFloat2_GrSLType,
kHigh_GrSLPrecision,
"AtlasSizeInv",
&atlasSizeInvName);
GrGLSLFPFragmentBuilder* fragBuilder = args.fFragBuilder;
// setup pass through color
varyingHandler->addPassThroughAttribute(dfTexEffect.inColor(), args.fOutputColor);
// Setup position
gpArgs->fPositionVar = dfTexEffect.inPosition()->asShaderVar();
// emit transforms
this->emitTransforms(vertBuilder,
varyingHandler,
uniformHandler,
dfTexEffect.inPosition()->asShaderVar(),
dfTexEffect.localMatrix(),
args.fFPCoordTransformHandler);
// set up varyings
GrGLSLVarying uv(kFloat2_GrSLType);
GrSLType texIdxType = args.fShaderCaps->integerSupport() ? kInt_GrSLType : kFloat_GrSLType;
GrGLSLVarying texIdx(texIdxType);
GrGLSLVarying st(kFloat2_GrSLType);
append_index_uv_varyings(args, dfTexEffect.inTextureCoords()->fName, atlasSizeInvName,
&uv, &texIdx, &st);
GrGLSLVarying delta(kFloat_GrSLType);
varyingHandler->addVarying("Delta", &delta);
if (dfTexEffect.getFlags() & kBGR_DistanceFieldEffectFlag) {
vertBuilder->codeAppendf("%s = -%s.x/3.0;", delta.vsOut(), atlasSizeInvName);
} else {
vertBuilder->codeAppendf("%s = %s.x/3.0;", delta.vsOut(), atlasSizeInvName);
}
// add frag shader code
bool isUniformScale = (dfTexEffect.getFlags() & kUniformScale_DistanceFieldEffectMask) ==
kUniformScale_DistanceFieldEffectMask;
bool isSimilarity = SkToBool(dfTexEffect.getFlags() & kSimilarity_DistanceFieldEffectFlag);
bool isGammaCorrect =
SkToBool(dfTexEffect.getFlags() & kGammaCorrect_DistanceFieldEffectFlag);
// create LCD offset adjusted by inverse of transform
// Use highp to work around aliasing issues
fragBuilder->codeAppendf("float2 uv = %s;\n", uv.fsIn());
if (isUniformScale) {
#ifdef SK_VULKAN
fragBuilder->codeAppendf("half st_grad_len = abs(dFdx(%s.x));", st.fsIn());
#else
// We use the y gradient because there is a bug in the Mali 400 in the x direction.
fragBuilder->codeAppendf("half st_grad_len = abs(dFdy(%s.y));", st.fsIn());
#endif
fragBuilder->codeAppendf("half2 offset = half2(st_grad_len*%s, 0.0);", delta.fsIn());
} else if (isSimilarity) {
// For a similarity matrix with rotation, the gradient will not be aligned
// with the texel coordinate axes, so we need to calculate it.
#ifdef SK_VULKAN
fragBuilder->codeAppendf("half2 st_grad = dFdx(%s);", st.fsIn());
fragBuilder->codeAppendf("half2 offset = %s*st_grad;", delta.fsIn());
#else
// We use dFdy because of a Mali 400 bug, and rotate -90 degrees to
// get the gradient in the x direction.
fragBuilder->codeAppendf("half2 st_grad = dFdy(%s);", st.fsIn());
fragBuilder->codeAppendf("half2 offset = %s*half2(st_grad.y, -st_grad.x);",
delta.fsIn());
#endif
fragBuilder->codeAppend("half st_grad_len = length(st_grad);");
} else {
fragBuilder->codeAppendf("half2 st = %s;\n", st.fsIn());
fragBuilder->codeAppend("half2 Jdx = dFdx(st);");
fragBuilder->codeAppend("half2 Jdy = dFdy(st);");
fragBuilder->codeAppendf("half2 offset = %s*Jdx;", delta.fsIn());
}
// sample the texture by index
fragBuilder->codeAppend("half4 texColor;");
append_multitexture_lookup(args, dfTexEffect.numTextureSamplers(),
texIdx, "uv", "texColor");
// green is distance to uv center
fragBuilder->codeAppend("half3 distance;");
fragBuilder->codeAppend("distance.y = texColor.r;");
// red is distance to left offset
fragBuilder->codeAppend("half2 uv_adjusted = uv - offset;");
append_multitexture_lookup(args, dfTexEffect.numTextureSamplers(),
texIdx, "uv_adjusted", "texColor");
fragBuilder->codeAppend("distance.x = texColor.r;");
// blue is distance to right offset
fragBuilder->codeAppend("uv_adjusted = uv + offset;");
append_multitexture_lookup(args, dfTexEffect.numTextureSamplers(),
texIdx, "uv_adjusted", "texColor");
fragBuilder->codeAppend("distance.z = texColor.r;");
fragBuilder->codeAppend("distance = "
"half3(" SK_DistanceFieldMultiplier ")*(distance - half3(" SK_DistanceFieldThreshold"));");
// adjust width based on gamma
const char* distanceAdjustUniName = nullptr;
fDistanceAdjustUni = uniformHandler->addUniform(kFragment_GrShaderFlag, kHalf3_GrSLType,
"DistanceAdjust", &distanceAdjustUniName);
fragBuilder->codeAppendf("distance -= %s;", distanceAdjustUniName);
// To be strictly correct, we should compute the anti-aliasing factor separately
// for each color component. However, this is only important when using perspective
// transformations, and even then using a single factor seems like a reasonable
// trade-off between quality and speed.
fragBuilder->codeAppend("half afwidth;");
if (isSimilarity) {
// For similarity transform (uniform scale-only is a subset of this), we adjust for the
// effect of the transformation on the distance by using the length of the gradient of
// the texture coordinates. We use st coordinates to ensure we're mapping 1:1 from texel
// space to pixel space.
// this gives us a smooth step across approximately one fragment
fragBuilder->codeAppend("afwidth = " SK_DistanceFieldAAFactor "*st_grad_len;");
} else {
// For general transforms, to determine the amount of correction we multiply a unit
// vector pointing along the SDF gradient direction by the Jacobian of the st coords
// (which is the inverse transform for this fragment) and take the length of the result.
fragBuilder->codeAppend("half2 dist_grad = half2(dFdx(distance.r), dFdy(distance.r));");
// the length of the gradient may be 0, so we need to check for this
// this also compensates for the Adreno, which likes to drop tiles on division by 0
fragBuilder->codeAppend("half dg_len2 = dot(dist_grad, dist_grad);");
fragBuilder->codeAppend("if (dg_len2 < 0.0001) {");
fragBuilder->codeAppend("dist_grad = half2(0.7071, 0.7071);");
fragBuilder->codeAppend("} else {");
fragBuilder->codeAppend("dist_grad = dist_grad*inversesqrt(dg_len2);");
fragBuilder->codeAppend("}");
fragBuilder->codeAppend("half2 grad = half2(dist_grad.x*Jdx.x + dist_grad.y*Jdy.x,");
fragBuilder->codeAppend(" dist_grad.x*Jdx.y + dist_grad.y*Jdy.y);");
// this gives us a smooth step across approximately one fragment
fragBuilder->codeAppend("afwidth = " SK_DistanceFieldAAFactor "*length(grad);");
}
// The smoothstep falloff compensates for the non-linear sRGB response curve. If we are
// doing gamma-correct rendering (to an sRGB or F16 buffer), then we actually want distance
// mapped linearly to coverage, so use a linear step:
if (isGammaCorrect) {
fragBuilder->codeAppendf("%s = "
"half4(clamp((distance + half3(afwidth)) / half3(2.0 * afwidth), 0.0, 1.0), 1.0);",
args.fOutputCoverage);
} else {
fragBuilder->codeAppendf(
"%s = half4(smoothstep(half3(-afwidth), half3(afwidth), distance), 1.0);",
args.fOutputCoverage);
}
}
void onEmitCode(EmitArgs& args, GrGPArgs* gpArgs) override{
const GrDistanceFieldPathGeoProc& dfPathEffect =
args.fGP.cast<GrDistanceFieldPathGeoProc>();
GrGLSLFPFragmentBuilder* fragBuilder = args.fFragBuilder;
GrGLSLVertexBuilder* vertBuilder = args.fVertBuilder;
GrGLSLVaryingHandler* varyingHandler = args.fVaryingHandler;
GrGLSLUniformHandler* uniformHandler = args.fUniformHandler;
// emit attributes
varyingHandler->emitAttributes(dfPathEffect);
const char* atlasSizeInvName;
fAtlasSizeInvUniform = uniformHandler->addUniform(kVertex_GrShaderFlag,
kFloat2_GrSLType,
kHigh_GrSLPrecision,
"AtlasSizeInv",
&atlasSizeInvName);
GrGLSLVarying uv(kFloat2_GrSLType);
GrSLType texIdxType = args.fShaderCaps->integerSupport() ? kInt_GrSLType : kFloat_GrSLType;
GrGLSLVarying texIdx(texIdxType);
GrGLSLVarying st(kFloat2_GrSLType);
append_index_uv_varyings(args, dfPathEffect.inTextureCoords()->fName, atlasSizeInvName, &uv,
&texIdx, &st);
// setup pass through color
varyingHandler->addPassThroughAttribute(dfPathEffect.inColor(), args.fOutputColor);
if (dfPathEffect.matrix().hasPerspective()) {
// Setup position
this->writeOutputPosition(vertBuilder,
uniformHandler,
gpArgs,
dfPathEffect.inPosition()->fName,
dfPathEffect.matrix(),
&fMatrixUniform);
// emit transforms
this->emitTransforms(vertBuilder,
varyingHandler,
uniformHandler,
dfPathEffect.inPosition()->asShaderVar(),
args.fFPCoordTransformHandler);
} else {
// Setup position
this->writeOutputPosition(vertBuilder, gpArgs, dfPathEffect.inPosition()->fName);
// emit transforms
this->emitTransforms(vertBuilder,
varyingHandler,
uniformHandler,
dfPathEffect.inPosition()->asShaderVar(),
dfPathEffect.matrix(),
args.fFPCoordTransformHandler);
}
// Use highp to work around aliasing issues
fragBuilder->codeAppendf("float2 uv = %s;", uv.fsIn());
fragBuilder->codeAppend("half4 texColor;");
append_multitexture_lookup(args, dfPathEffect.numTextureSamplers(), texIdx, "uv",
"texColor");
fragBuilder->codeAppend("half distance = "
SK_DistanceFieldMultiplier "*(texColor.r - " SK_DistanceFieldThreshold ");");
fragBuilder->codeAppend("half afwidth;");
bool isUniformScale = (dfPathEffect.getFlags() & kUniformScale_DistanceFieldEffectMask) ==
kUniformScale_DistanceFieldEffectMask;
bool isSimilarity = SkToBool(dfPathEffect.getFlags() & kSimilarity_DistanceFieldEffectFlag);
bool isGammaCorrect =
SkToBool(dfPathEffect.getFlags() & kGammaCorrect_DistanceFieldEffectFlag);
if (isUniformScale) {
// For uniform scale, we adjust for the effect of the transformation on the distance
// by using the length of the gradient of the t coordinate in the y direction.
// We use st coordinates to ensure we're mapping 1:1 from texel space to pixel space.
// this gives us a smooth step across approximately one fragment
#ifdef SK_VULKAN
fragBuilder->codeAppendf("afwidth = abs(" SK_DistanceFieldAAFactor "*dFdx(%s.x));",
st.fsIn());
#else
// We use the y gradient because there is a bug in the Mali 400 in the x direction.
fragBuilder->codeAppendf("afwidth = abs(" SK_DistanceFieldAAFactor "*dFdy(%s.y));",
st.fsIn());
#endif
} else if (isSimilarity) {
// For similarity transform, we adjust the effect of the transformation on the distance
// by using the length of the gradient of the texture coordinates. We use st coordinates
// to ensure we're mapping 1:1 from texel space to pixel space.
// this gives us a smooth step across approximately one fragment
#ifdef SK_VULKAN
fragBuilder->codeAppendf("half st_grad_len = length(dFdx(%s));", st.fsIn());
#else
// We use the y gradient because there is a bug in the Mali 400 in the x direction.
fragBuilder->codeAppendf("half st_grad_len = length(dFdy(%s));", st.fsIn());
#endif
fragBuilder->codeAppend("afwidth = abs(" SK_DistanceFieldAAFactor "*st_grad_len);");
} else {
// For general transforms, to determine the amount of correction we multiply a unit
// vector pointing along the SDF gradient direction by the Jacobian of the st coords
// (which is the inverse transform for this fragment) and take the length of the result.
fragBuilder->codeAppend("half2 dist_grad = half2(dFdx(distance), dFdy(distance));");
// the length of the gradient may be 0, so we need to check for this
// this also compensates for the Adreno, which likes to drop tiles on division by 0
fragBuilder->codeAppend("half dg_len2 = dot(dist_grad, dist_grad);");
fragBuilder->codeAppend("if (dg_len2 < 0.0001) {");
fragBuilder->codeAppend("dist_grad = half2(0.7071, 0.7071);");
fragBuilder->codeAppend("} else {");
fragBuilder->codeAppend("dist_grad = dist_grad*inversesqrt(dg_len2);");
fragBuilder->codeAppend("}");
fragBuilder->codeAppendf("half2 Jdx = dFdx(%s);", st.fsIn());
fragBuilder->codeAppendf("half2 Jdy = dFdy(%s);", st.fsIn());
fragBuilder->codeAppend("half2 grad = half2(dist_grad.x*Jdx.x + dist_grad.y*Jdy.x,");
fragBuilder->codeAppend(" dist_grad.x*Jdx.y + dist_grad.y*Jdy.y);");
// this gives us a smooth step across approximately one fragment
fragBuilder->codeAppend("afwidth = " SK_DistanceFieldAAFactor "*length(grad);");
}
// The smoothstep falloff compensates for the non-linear sRGB response curve. If we are
// doing gamma-correct rendering (to an sRGB or F16 buffer), then we actually want distance
// mapped linearly to coverage, so use a linear step:
if (isGammaCorrect) {
fragBuilder->codeAppend(
"half val = clamp((distance + afwidth) / (2.0 * afwidth), 0.0, 1.0);");
} else {
fragBuilder->codeAppend("half val = smoothstep(-afwidth, afwidth, distance);");
}
fragBuilder->codeAppendf("%s = half4(val);", args.fOutputCoverage);
}
void onEmitCode(EmitArgs& args, GrGPArgs* gpArgs) override {
const auto& proc = args.fGP.cast<Processor>();
bool useHWDerivatives = (proc.fFlags & Flags::kUseHWDerivatives);
bool hasPerspective = (proc.fFlags & Flags::kHasPerspective);
bool hasLocalCoords = (proc.fFlags & Flags::kHasLocalCoords);
SkASSERT(useHWDerivatives == hasPerspective);
SkASSERT(proc.vertexStride() == sizeof(MSAAVertex));
// Emit the vertex shader.
GrGLSLVertexBuilder* v = args.fVertBuilder;
GrGLSLVaryingHandler* varyings = args.fVaryingHandler;
varyings->emitAttributes(proc);
varyings->addPassThroughAttribute(*proc.fColorAttrib, args.fOutputColor,
GrGLSLVaryingHandler::Interpolation::kCanBeFlat);
// Unpack vertex attribs.
v->codeAppendf("float2 corner = corner_and_radius_outsets.xy;");
v->codeAppendf("float2 radius_outset = corner_and_radius_outsets.zw;");
// Identify our radii.
v->codeAppend("float2 radii;");
v->codeAppend("radii.x = dot(radii_selector, radii_x);");
v->codeAppend("radii.y = dot(radii_selector, radii_y);");
v->codeAppendf("bool is_arc_section = (radii.x > 0);");
v->codeAppendf("radii = abs(radii);");
// Find our vertex position, adjusted for radii. Our rect is drawn in normalized
// [-1,-1,+1,+1] space.
v->codeAppend("float2 vertexpos = corner + radius_outset * radii;");
// Emit transforms.
GrShaderVar localCoord("", kFloat2_GrSLType);
if (hasLocalCoords) {
v->codeAppend("float2 localcoord = (local_rect.xy * (1 - vertexpos) + "
"local_rect.zw * (1 + vertexpos)) * .5;");
localCoord.set(kFloat2_GrSLType, "localcoord");
}
this->emitTransforms(v, varyings, args.fUniformHandler, localCoord,
args.fFPCoordTransformHandler);
// Transform to device space.
if (!hasPerspective) {
v->codeAppend("float2x2 skewmatrix = float2x2(skew.xy, skew.zw);");
v->codeAppend("float2 devcoord = vertexpos * skewmatrix + translate;");
gpArgs->fPositionVar.set(kFloat2_GrSLType, "devcoord");
} else {
v->codeAppend("float3x3 persp_matrix = float3x3(persp_x, persp_y, persp_z);");
v->codeAppend("float3 devcoord = float3(vertexpos, 1) * persp_matrix;");
gpArgs->fPositionVar.set(kFloat3_GrSLType, "devcoord");
}
// Determine normalized arc coordinates for the implicit function.
GrGLSLVarying arcCoord((useHWDerivatives) ? kFloat2_GrSLType : kFloat4_GrSLType);
varyings->addVarying("arccoord", &arcCoord);
v->codeAppendf("if (is_arc_section) {");
v->codeAppendf( "%s.xy = 1 - abs(radius_outset);", arcCoord.vsOut());
if (!useHWDerivatives) {
// The gradient is order-1: Interpolate it across arccoord.zw.
// This doesn't work with perspective.
SkASSERT(!hasPerspective);
v->codeAppendf("float2x2 derivatives = inverse(skewmatrix);");
v->codeAppendf("%s.zw = derivatives * (%s.xy/radii * corner * 2);",
arcCoord.vsOut(), arcCoord.vsOut());
}
v->codeAppendf("} else {");
if (useHWDerivatives) {
v->codeAppendf("%s = float2(0);", arcCoord.vsOut());
} else {
v->codeAppendf("%s = float4(0);", arcCoord.vsOut());
}
v->codeAppendf("}");
// Emit the fragment shader.
GrGLSLFPFragmentBuilder* f = args.fFragBuilder;
f->codeAppendf("%s = half4(1);", args.fOutputCoverage);
// If x,y == 0, then we are drawing a triangle that does not track an arc.
f->codeAppendf("if (float2(0) != %s.xy) {", arcCoord.fsIn());
f->codeAppendf( "float fn = dot(%s.xy, %s.xy) - 1;", arcCoord.fsIn(), arcCoord.fsIn());
if (GrAAType::kMSAA == proc.fAAType) {
using ScopeFlags = GrGLSLFPFragmentBuilder::ScopeFlags;
if (!useHWDerivatives) {
f->codeAppendf("float2 grad = %s.zw;", arcCoord.fsIn());
f->applyFnToMultisampleMask("fn", "grad", ScopeFlags::kInsidePerPrimitiveBranch);
} else {
f->applyFnToMultisampleMask("fn", nullptr, ScopeFlags::kInsidePerPrimitiveBranch);
}
} else {
f->codeAppendf("if (fn > 0) {");
f->codeAppendf( "%s = half4(0);", args.fOutputCoverage);
f->codeAppendf("}");
}
f->codeAppendf("}");
}
void onEmitCode(EmitArgs& args, GrGPArgs* gpArgs) override {
const auto& proc = args.fGP.cast<Processor>();
bool useHWDerivatives = (proc.fFlags & Flags::kUseHWDerivatives);
SkASSERT(proc.vertexStride() == sizeof(CoverageVertex));
GrGLSLVaryingHandler* varyings = args.fVaryingHandler;
varyings->emitAttributes(proc);
varyings->addPassThroughAttribute(*proc.fColorAttrib, args.fOutputColor,
GrGLSLVaryingHandler::Interpolation::kCanBeFlat);
// Emit the vertex shader.
GrGLSLVertexBuilder* v = args.fVertBuilder;
// Unpack vertex attribs.
v->codeAppend("float2 corner = corner_and_radius_outsets.xy;");
v->codeAppend("float2 radius_outset = corner_and_radius_outsets.zw;");
v->codeAppend("float2 aa_bloat_direction = aa_bloat_and_coverage.xy;");
v->codeAppend("float coverage = aa_bloat_and_coverage.z;");
v->codeAppend("float is_linear_coverage = aa_bloat_and_coverage.w;");
// Find the amount to bloat each edge for AA (in source space).
v->codeAppend("float2 pixellength = inversesqrt("
"float2(dot(skew.xz, skew.xz), dot(skew.yw, skew.yw)));");
v->codeAppend("float4 normalized_axis_dirs = skew * pixellength.xyxy;");
v->codeAppend("float2 axiswidths = (abs(normalized_axis_dirs.xy) + "
"abs(normalized_axis_dirs.zw));");
v->codeAppend("float2 aa_bloatradius = axiswidths * pixellength * .5;");
// Identify our radii.
v->codeAppend("float4 radii_and_neighbors = radii_selector"
"* float4x4(radii_x, radii_y, radii_x.yxwz, radii_y.wzyx);");
v->codeAppend("float2 radii = radii_and_neighbors.xy;");
v->codeAppend("float2 neighbor_radii = radii_and_neighbors.zw;");
v->codeAppend("if (any(greaterThan(aa_bloatradius, float2(1)))) {");
// The rrect is more narrow than an AA coverage ramp. We can't draw as-is
// or else opposite AA borders will overlap. Instead, fudge the size up to
// the width of a coverage ramp, and then reduce total coverage to make
// the rect appear more thin.
v->codeAppend( "corner = max(abs(corner), aa_bloatradius) * sign(corner);");
v->codeAppend( "coverage /= max(aa_bloatradius.x, 1) * max(aa_bloatradius.y, 1);");
// Set radii to zero to ensure we take the "linear coverage" codepath.
// (The "coverage" variable only has effect in the linear codepath.)
v->codeAppend( "radii = float2(0);");
v->codeAppend("}");
v->codeAppend("if (any(lessThan(radii, aa_bloatradius * 1.25))) {");
// The radii are very small. Demote this arc to a sharp 90 degree corner.
v->codeAppend( "radii = aa_bloatradius;");
// Snap octagon vertices to the corner of the bounding box.
v->codeAppend( "radius_outset = floor(abs(radius_outset)) * radius_outset;");
v->codeAppend( "is_linear_coverage = 1;");
v->codeAppend("} else {");
// Don't let radii get smaller than a pixel.
v->codeAppend( "radii = clamp(radii, pixellength, 2 - pixellength);");
v->codeAppend( "neighbor_radii = clamp(neighbor_radii, pixellength, 2 - pixellength);");
// Don't let neighboring radii get closer together than 1/16 pixel.
v->codeAppend( "float2 spacing = 2 - radii - neighbor_radii;");
v->codeAppend( "float2 extra_pad = max(pixellength * .0625 - spacing, float2(0));");
v->codeAppend( "radii -= extra_pad * .5;");
v->codeAppend("}");
// Find our vertex position, adjusted for radii and bloated for AA. Our rect is drawn in
// normalized [-1,-1,+1,+1] space.
v->codeAppend("float2 aa_outset = aa_bloat_direction.xy * aa_bloatradius;");
v->codeAppend("float2 vertexpos = corner + radius_outset * radii + aa_outset;");
// Emit transforms.
GrShaderVar localCoord("", kFloat2_GrSLType);
if (proc.fFlags & Flags::kHasLocalCoords) {
v->codeAppend("float2 localcoord = (local_rect.xy * (1 - vertexpos) + "
"local_rect.zw * (1 + vertexpos)) * .5;");
localCoord.set(kFloat2_GrSLType, "localcoord");
}
this->emitTransforms(v, varyings, args.fUniformHandler, localCoord,
args.fFPCoordTransformHandler);
// Transform to device space.
SkASSERT(!(proc.fFlags & Flags::kHasPerspective));
v->codeAppend("float2x2 skewmatrix = float2x2(skew.xy, skew.zw);");
v->codeAppend("float2 devcoord = vertexpos * skewmatrix + translate;");
gpArgs->fPositionVar.set(kFloat2_GrSLType, "devcoord");
// Setup interpolants for coverage.
GrGLSLVarying arcCoord(useHWDerivatives ? kFloat2_GrSLType : kFloat4_GrSLType);
varyings->addVarying("arccoord", &arcCoord);
v->codeAppend("if (0 != is_linear_coverage) {");
// We are a non-corner piece: Set x=0 to indicate built-in coverage, and
// interpolate linear coverage across y.
v->codeAppendf( "%s.xy = float2(0, coverage);", arcCoord.vsOut());
v->codeAppend("} else {");
// Find the normalized arc coordinates for our corner ellipse.
// (i.e., the coordinate system where x^2 + y^2 == 1).
v->codeAppend( "float2 arccoord = 1 - abs(radius_outset) + aa_outset/radii * corner;");
// We are a corner piece: Interpolate the arc coordinates for coverage.
// Emit x+1 to ensure no pixel in the arc has a x value of 0 (since x=0
// instructs the fragment shader to use linear coverage).
v->codeAppendf( "%s.xy = float2(arccoord.x+1, arccoord.y);", arcCoord.vsOut());
if (!useHWDerivatives) {
// The gradient is order-1: Interpolate it across arccoord.zw.
v->codeAppendf("float2x2 derivatives = inverse(skewmatrix);");
v->codeAppendf("%s.zw = derivatives * (arccoord/radii * 2);", arcCoord.vsOut());
}
v->codeAppend("}");
// Emit the fragment shader.
GrGLSLFPFragmentBuilder* f = args.fFragBuilder;
f->codeAppendf("float x_plus_1=%s.x, y=%s.y;", arcCoord.fsIn(), arcCoord.fsIn());
f->codeAppendf("half coverage;");
f->codeAppendf("if (0 == x_plus_1) {");
f->codeAppendf( "coverage = half(y);"); // We are a non-arc pixel (linear coverage).
f->codeAppendf("} else {");
f->codeAppendf( "float fn = x_plus_1 * (x_plus_1 - 2);"); // fn = (x+1)*(x-1) = x^2-1
f->codeAppendf( "fn = fma(y,y, fn);"); // fn = x^2 + y^2 - 1
if (useHWDerivatives) {
f->codeAppendf("float fnwidth = fwidth(fn);");
} else {
// The gradient is interpolated across arccoord.zw.
f->codeAppendf("float gx=%s.z, gy=%s.w;", arcCoord.fsIn(), arcCoord.fsIn());
f->codeAppendf("float fnwidth = abs(gx) + abs(gy);");
}
f->codeAppendf( "half d = half(fn/fnwidth);");
f->codeAppendf( "coverage = clamp(.5 - d, 0, 1);");
f->codeAppendf("}");
f->codeAppendf("%s = half4(coverage);", args.fOutputCoverage);
}
