void MeshX::BuildSkinnedMesh()
{
ID3DXMesh* oldMesh = allocMeshHierarchy.GetMeshList().front()->MeshData.pMesh;
//compute normal
D3DVERTEXELEMENT9 elements[MAX_FVF_DECL_SIZE];
oldMesh->GetDeclaration(elements);
ID3DXMesh* tempMesh = 0;
ID3DXMesh* tempOpMesh = 0;
oldMesh->CloneMesh(D3DXMESH_SYSTEMMEM, elements, pDevice, &tempMesh);
if( !HasNormals(tempMesh) )
D3DXComputeNormals(tempMesh, 0);
//optimize the mesh
DWORD* adj = new DWORD[tempMesh->GetNumFaces()*3];
ID3DXBuffer* remap = 0;
tempMesh->GenerateAdjacency(0.00001f, adj);
tempMesh->Optimize(D3DXMESH_SYSTEMMEM | D3DXMESHOPT_VERTEXCACHE |
D3DXMESHOPT_ATTRSORT, adj, 0, 0, &remap, &tempOpMesh);
SafeRelease(tempMesh);
// In the .X file (specifically the array DWORD vertexIndices[nWeights]
// data member of the SkinWeights template) each bone has an array of
// indices which identify the vertices of the mesh that the bone influences.
// Because we have just rearranged the vertices (from optimizing), the vertex
// indices of a bone are obviously incorrect (i.e., they index to vertices the bone
// does not influence since we moved vertices around). In order to update a bone's
// vertex indices to the vertices the bone _does_ influence, we simply need to specify
// where we remapped the vertices to, so that the vertex indices can be updated to
// match. This is done with the ID3DXSkinInfo::Remap method.
skinInfo->Remap(tempOpMesh->GetNumVertices(),
(DWORD*)remap->GetBufferPointer());
SafeRelease(remap); // Done with remap info.
DWORD numBoneComboEntries = 0;
ID3DXBuffer* boneComboTable = 0;
DWORD maxVertInfluences;
skinInfo->ConvertToIndexedBlendedMesh(tempOpMesh, 0,
128, 0, 0, 0, 0, &maxVertInfluences,
&numBoneComboEntries, &boneComboTable, &this->mesh);
SafeRelease(tempOpMesh);
SafeRelease(boneComboTable);
delete[] adj;
}
void LoadXFile(const std::string & filename, ID3DXMesh** meshOut, std::vector<Mtrl> & mtrls, std::vector<IDirect3DTexture9*> & texs)
{
ID3DXMesh* meshSys = 0;
ID3DXBuffer * adjBuffer = 0;
ID3DXBuffer * mtrlBuffer = 0;
DWORD numMtrls = 0;
//step 1. Load the x file into system memory
HR(D3DXLoadMeshFromX(filename.c_str(), D3DXMESH_SYSTEMMEM, gd3dDevice, &adjBuffer, &mtrlBuffer, 0, &numMtrls, &meshSys));
//step 2. look into MAX_FVF_DECL_SIZE
D3DVERTEXELEMENT9 elems[MAX_FVF_DECL_SIZE];
HR(meshSys->GetDeclaration(elems));
bool hasNormals = false;
D3DVERTEXELEMENT9 term = D3DDECL_END();
for(int i = 0; i < MAX_FVF_DECL_SIZE; ++i)
{
//did we reach end?
if(elems[i].Stream == 0xff)
break;
if(elems[i].Type == D3DDECLTYPE_FLOAT3 && elems[i].Usage == D3DDECLUSAGE_NORMAL && elems[i].UsageIndex == 0)
{
hasNormals = true;
break;
}
}
//step 3.
D3DVERTEXELEMENT9 elements[64];
UINT numElements = 0;
VertexPNT::Decl->GetDeclaration(elements, &numElements);
ID3DXMesh * temp = 0;
//HR(meshSys->CloneMesh(D3DXMESH_SYSTEMMEM, elements, gd3dDevice, &temp));
HR(meshSys->CloneMesh(D3DXMESH_32BIT, elements, gd3dDevice, &temp));
ReleaseCOM(meshSys);
meshSys = temp;
//step 4
if( hasNormals == false )
HR(D3DXComputeNormals(meshSys, 0));
//step 5
HR(meshSys->Optimize(D3DXMESH_MANAGED | D3DXMESHOPT_COMPACT | D3DXMESHOPT_ATTRSORT
| D3DXMESHOPT_VERTEXCACHE, (DWORD*)adjBuffer->GetBufferPointer(), 0, 0, 0, meshOut));
ReleaseCOM(meshSys); //Done w/ system mesh
ReleaseCOM(adjBuffer); //done with buffer
//step 6: get the materials and load the textures
if(mtrlBuffer != 0 && numMtrls != 0)
{
D3DXMATERIAL *d3dxMtrls = (D3DXMATERIAL*)mtrlBuffer->GetBufferPointer();
for(DWORD i = 0; i < numMtrls; ++i)
{
//save the ith material. MatD3D ambient
//doesnt have a default value, so I'm setting
//it to be the same as the diffuse
Mtrl m;
m.ambient = d3dxMtrls[i].MatD3D.Diffuse;
m.diffuse = d3dxMtrls[i].MatD3D.Diffuse;
m.spec = d3dxMtrls[i].MatD3D.Specular;
m.specPower = d3dxMtrls[i].MatD3D.Power;
mtrls.push_back(m);
//check if the ith material has an associative texture
if(d3dxMtrls[i].pTextureFilename != 0)
{
//yes, load the texture for the ith subset
IDirect3DTexture9* tex = 0;
char *texFN = d3dxMtrls[i].pTextureFilename;
HR(D3DXCreateTextureFromFile(gd3dDevice, texFN, &tex));
//save the loaded texure
texs.push_back(tex);
}
else
{
//no texture
texs.push_back( 0 );
}
}
}
ReleaseCOM(mtrlBuffer); // done with the buffer
}
void LoadXFile(
const std::string& filename,
ID3DXMesh** meshOut,
std::vector<Mtrl>& mtrls,
std::vector<IDirect3DTexture9*>& texs)
{
// Step 1: Load the .x file from file into a system memory mesh.
ID3DXMesh* meshSys = 0;
ID3DXBuffer* adjBuffer = 0;
ID3DXBuffer* mtrlBuffer = 0;
DWORD numMtrls = 0;
HR(D3DXLoadMeshFromX(filename.c_str(), D3DXMESH_SYSTEMMEM, gd3dDevice,
&adjBuffer, &mtrlBuffer, 0, &numMtrls, &meshSys));
// Step 2: Find out if the mesh already has normal info?
D3DVERTEXELEMENT9 elems[MAX_FVF_DECL_SIZE];
HR(meshSys->GetDeclaration(elems));
bool hasNormals = false;
D3DVERTEXELEMENT9 term = D3DDECL_END();
for(int i = 0; i < MAX_FVF_DECL_SIZE; ++i)
{
// Did we reach D3DDECL_END() {0xFF,0,D3DDECLTYPE_UNUSED, 0,0,0}?
if(elems[i].Stream == 0xff )
break;
if( elems[i].Type == D3DDECLTYPE_FLOAT3 &&
elems[i].Usage == D3DDECLUSAGE_NORMAL &&
elems[i].UsageIndex == 0 )
{
hasNormals = true;
break;
}
}
// Step 3: Change vertex format to VertexPNT.
D3DVERTEXELEMENT9 elements[64];
UINT numElements = 0;
VertexPNT::Decl->GetDeclaration(elements, &numElements);
ID3DXMesh* temp = 0;
HR(meshSys->CloneMesh(D3DXMESH_SYSTEMMEM,
elements, gd3dDevice, &temp));
ReleaseCOM(meshSys);
meshSys = temp;
// Step 4: If the mesh did not have normals, generate them.
if( hasNormals == false)
HR(D3DXComputeNormals(meshSys, 0));
// Step 5: Optimize the mesh.
HR(meshSys->Optimize(D3DXMESH_MANAGED |
D3DXMESHOPT_COMPACT | D3DXMESHOPT_ATTRSORT | D3DXMESHOPT_VERTEXCACHE,
(DWORD*)adjBuffer->GetBufferPointer(), 0, 0, 0, meshOut));
ReleaseCOM(meshSys); // Done w/ system mesh.
ReleaseCOM(adjBuffer); // Done with buffer.
// Step 6: Extract the materials and load the textures.
if( mtrlBuffer != 0 && numMtrls != 0 )
{
D3DXMATERIAL* d3dxmtrls = (D3DXMATERIAL*)mtrlBuffer->GetBufferPointer();
for(DWORD i = 0; i < numMtrls; ++i)
{
// Save the ith material. Note that the MatD3D property does not have an ambient
// value set when its loaded, so just set it to the diffuse value.
Mtrl m;
m.ambient = d3dxmtrls[i].MatD3D.Diffuse;
m.diffuse = d3dxmtrls[i].MatD3D.Diffuse;
m.spec = d3dxmtrls[i].MatD3D.Specular;
m.specPower = d3dxmtrls[i].MatD3D.Power;
mtrls.push_back( m );
// Check if the ith material has an associative texture
if( d3dxmtrls[i].pTextureFilename != 0 )
{
// Yes, load the texture for the ith subset
IDirect3DTexture9* tex = 0;
char* texFN = d3dxmtrls[i].pTextureFilename;
HR(D3DXCreateTextureFromFile(gd3dDevice, texFN, &tex));
// Save the loaded texture
texs.push_back( tex );
}
else
{
// No texture for the ith subset
texs.push_back( 0 );
}
}
}
ReleaseCOM(mtrlBuffer); // done w/ buffer
}
void SkinnedMesh::buildSkinnedMesh(ID3DXMesh* mesh)
{
//====================================================================
// First add a normal component and 2D texture coordinates component.
D3DVERTEXELEMENT9 elements[64];
UINT numElements = 0;
VertexPNT::Decl->GetDeclaration(elements, &numElements);
ID3DXMesh* tempMesh = 0;
HR(mesh->CloneMesh(D3DXMESH_SYSTEMMEM, elements, gd3dDevice, &tempMesh));
if( !hasNormals(tempMesh) )
HR(D3DXComputeNormals(tempMesh, 0));
//====================================================================
// Optimize the mesh; in particular, the vertex cache.
DWORD* adj = new DWORD[tempMesh->GetNumFaces()*3];
ID3DXBuffer* remap = 0;
HR(tempMesh->GenerateAdjacency(EPSILON, adj));
ID3DXMesh* optimizedTempMesh = 0;
HR(tempMesh->Optimize(D3DXMESH_SYSTEMMEM | D3DXMESHOPT_VERTEXCACHE |
D3DXMESHOPT_ATTRSORT, adj, 0, 0, &remap, &optimizedTempMesh));
ReleaseCOM(tempMesh); // Done w/ this mesh.
delete[] adj; // Done with buffer.
// In the .X file (specifically the array DWORD vertexIndices[nWeights]
// data member of the SkinWeights template) each bone has an array of
// indices which identify the vertices of the mesh that the bone influences.
// Because we have just rearranged the vertices (from optimizing), the vertex
// indices of a bone are obviously incorrect (i.e., they index to vertices the bone
// does not influence since we moved vertices around). In order to update a bone's
// vertex indices to the vertices the bone _does_ influence, we simply need to specify
// where we remapped the vertices to, so that the vertex indices can be updated to
// match. This is done with the ID3DXSkinInfo::Remap method.
HR(mSkinInfo->Remap(optimizedTempMesh->GetNumVertices(),
(DWORD*)remap->GetBufferPointer()));
ReleaseCOM(remap); // Done with remap info.
//====================================================================
// The vertex format of the source mesh does not include vertex weights
// nor bone index data, which are both needed for vertex blending.
// Therefore, we must convert the source mesh to an "indexed-blended-mesh,"
// which does have the necessary data.
DWORD numBoneComboEntries = 0;
ID3DXBuffer* boneComboTable = 0;
HR(mSkinInfo->ConvertToIndexedBlendedMesh(optimizedTempMesh, D3DXMESH_MANAGED | D3DXMESH_WRITEONLY,
MAX_NUM_BONES_SUPPORTED, 0, 0, 0, 0, &mMaxVertInfluences,
&numBoneComboEntries, &boneComboTable, &mSkinnedMesh));
ReleaseCOM(optimizedTempMesh); // Done with tempMesh.
ReleaseCOM(boneComboTable); // Don't need bone table.
#if defined(DEBUG) | defined(_DEBUG)
// Output to the debug output the vertex declaration of the mesh at this point.
// This is for insight only to see what exactly ConvertToIndexedBlendedMesh
// does to the vertex declaration.
D3DVERTEXELEMENT9 elems[MAX_FVF_DECL_SIZE];
HR(mSkinnedMesh->GetDeclaration(elems));
OutputDebugString("\nVertex Format After ConvertToIndexedBlendedMesh\n");
int i = 0;
while( elems[i].Stream != 0xff ) // While not D3DDECL_END()
{
if( elems[i].Type == D3DDECLTYPE_FLOAT1)
OutputDebugString("Type = D3DDECLTYPE_FLOAT1; ");
if( elems[i].Type == D3DDECLTYPE_FLOAT2)
OutputDebugString("Type = D3DDECLTYPE_FLOAT2; ");
if( elems[i].Type == D3DDECLTYPE_FLOAT3)
OutputDebugString("Type = D3DDECLTYPE_FLOAT3; ");
if( elems[i].Type == D3DDECLTYPE_UBYTE4)
OutputDebugString("Type = D3DDECLTYPE_UBYTE4; ");
if( elems[i].Usage == D3DDECLUSAGE_POSITION)
OutputDebugString("Usage = D3DDECLUSAGE_POSITION\n");
if( elems[i].Usage == D3DDECLUSAGE_BLENDWEIGHT)
OutputDebugString("Usage = D3DDECLUSAGE_BLENDWEIGHT\n");
if( elems[i].Usage == D3DDECLUSAGE_BLENDINDICES)
OutputDebugString("Usage = D3DDECLUSAGE_BLENDINDICES\n");
if( elems[i].Usage == D3DDECLUSAGE_NORMAL)
OutputDebugString("Usage = D3DDECLUSAGE_NORMAL\n");
if( elems[i].Usage == D3DDECLUSAGE_TEXCOORD)
OutputDebugString("Usage = D3DDECLUSAGE_TEXCOORD\n");
++i;
}
#endif
}
void XManager::loadXFile(IDirect3DDevice9* dev, const std::string& filename, ID3DXMesh** meshOut, std::vector<Material>* mtrls, std::vector<IDirect3DTexture9*>* texs) {
// Step 1: Load the .x file from file into a system memory mesh.
ID3DXMesh* meshSys = 0;
ID3DXBuffer* adjBuffer = 0;
ID3DXBuffer* mtrlBuffer = 0;
DWORD numMtrls = 0;
HR(D3DXLoadMeshFromX(filename.c_str(), D3DXMESH_SYSTEMMEM, dev,
&adjBuffer, &mtrlBuffer, 0, &numMtrls, &meshSys));
// Step 2: Find out if the mesh already has normal info?
D3DVERTEXELEMENT9 elems[MAX_FVF_DECL_SIZE];
HR(meshSys->GetDeclaration(elems));
bool hasNormals = false;
D3DVERTEXELEMENT9 term = D3DDECL_END();
for(int i = 0; i < MAX_FVF_DECL_SIZE; ++i)
{
// Did we reach D3DDECL_END() {0xFF,0,D3DDECLTYPE_UNUSED, 0,0,0}?
if(elems[i].Stream == 0xff )
break;
if( elems[i].Type == D3DDECLTYPE_FLOAT3 &&
elems[i].Usage == D3DDECLUSAGE_NORMAL &&
elems[i].UsageIndex == 0 )
{
hasNormals = true;
break;
}
}
// Step 3: Change vertex format to CustomVertex3NormalUV
D3DVERTEXELEMENT9 elements[64];
UINT numElements = 0;
CustomVertex3NormalUV::decl->GetDeclaration(elements, &numElements);
ID3DXMesh* temp = 0;
HR(meshSys->CloneMesh(D3DXMESH_SYSTEMMEM,
elements, dev, &temp));
SAFERELEASECOM(meshSys);
meshSys = temp;
// Step 4: If the mesh did not have normals, generate them.
if( hasNormals == false)
HR(D3DXComputeNormals(meshSys, 0));
// Step 5: Optimize the mesh.
HR(meshSys->Optimize(D3DXMESH_MANAGED |
D3DXMESHOPT_COMPACT | D3DXMESHOPT_ATTRSORT | D3DXMESHOPT_VERTEXCACHE,
(DWORD*)adjBuffer->GetBufferPointer(), 0, 0, 0, meshOut));
SAFERELEASECOM(meshSys); // Done w/ system mesh.
SAFERELEASECOM(adjBuffer); // Done with buffer.
// Step 6: Extract the materials and load the textures.
if( mtrlBuffer != 0 && numMtrls != 0 )
{
D3DXMATERIAL* d3dxmtrls = (D3DXMATERIAL*)mtrlBuffer->GetBufferPointer();
for(DWORD i = 0; i < numMtrls; ++i)
{
// Save the ith material. Note that the MatD3D property does not have an ambient
// value set when its loaded, so just set it to the diffuse value.
Material m;
m.ambient = d3dxmtrls[i].MatD3D.Diffuse;
m.diffuse = d3dxmtrls[i].MatD3D.Diffuse;
m.spec = d3dxmtrls[i].MatD3D.Specular;
m.specPower = d3dxmtrls[i].MatD3D.Power;
mtrls->push_back( m );
// Check if the ith material has an associative texture
if( d3dxmtrls[i].pTextureFilename != 0 )
{
IDirect3DTexture9* tex = 0;
std::string s(d3dxmtrls[i].pTextureFilename);
const char folder[] = "./texture/";
unsigned int pos = s.find_last_of('\/');
std::string newFileName(folder);
// std::string::npos gets returned if no / was found
if(pos != std::string::npos) {
//std::string sub = s.substr(pos,s.size());
if(strcmp(s.substr(pos+1,s.size()).c_str(),"Watcher.tga") == 0) {
newFileName.append("Watcher_Black.tga");
}
else {
newFileName.append(s.substr(pos+1,s.size()));
}
}
else {
newFileName.append(s);
}
// Save the loaded texture
HR(D3DXCreateTextureFromFile(dev, newFileName.c_str(), &tex));
texs->push_back( tex );
}
else
{
int APIENTRY WinMain(HINSTANCE hInstance,
HINSTANCE hPrevInstance,
LPSTR lpCmdLine,
int nCmdShow)
{
WNDCLASS wc;
wc.style = CS_HREDRAW | CS_VREDRAW | CS_OWNDC;
wc.lpfnWndProc = (WNDPROC) MainWindowProc;
wc.cbClsExtra = 0;
wc.cbWndExtra = 0;
wc.hInstance = hInstance;
wc.hIcon = NULL;
wc.hCursor = LoadCursor(NULL, MAKEINTRESOURCE(IDC_ARROW));
wc.hbrBackground = (HBRUSH) GetStockObject(WHITE_BRUSH);
wc.lpszMenuName = NULL;
wc.lpszClassName = "xtocmod";
if (RegisterClass(&wc) == 0)
{
MessageBox(NULL,
"Failed to register the window class.", "Fatal Error",
MB_OK | MB_ICONERROR);
return NULL;
}
DWORD windowStyle = (WS_OVERLAPPED | WS_CAPTION | WS_SYSMENU |
WS_THICKFRAME | WS_MINIMIZEBOX | WS_MAXIMIZEBOX);
g_mainWindow = CreateWindow("xtocmod",
"xtocmod",
windowStyle,
CW_USEDEFAULT,
CW_USEDEFAULT,
300, 300,
NULL,
NULL,
hInstance,
NULL);
if (g_mainWindow == NULL)
{
MessageBox(NULL,
"Error creating application window.", "Fatal Error",
MB_OK | MB_ICONERROR);
}
//ShowWindow(g_mainWindow, SW_SHOW);
SetForegroundWindow(g_mainWindow);
SetFocus(g_mainWindow);
// Initialize D3D
g_d3d = Direct3DCreate9(D3D_SDK_VERSION);
if (g_d3d == NULL)
{
ShowD3DErrorMessage("Initializing D3D", 0);
return 1;
}
D3DPRESENT_PARAMETERS presentParams;
ZeroMemory(&presentParams, sizeof(presentParams));
presentParams.Windowed = TRUE;
presentParams.SwapEffect = D3DSWAPEFFECT_COPY;
#if 0
presentParams.BackBufferWidth = 300;
presentParams.BackBufferHeight = 300;
presentParams.BackBufferCount = 1;
presentParams.PresentationInterval = D3DPRESENT_INTERVAL_IMMEDIATE;
presentParams.Windowed = TRUE;
#endif
HRESULT hr = g_d3d->CreateDevice(D3DADAPTER_DEFAULT,
D3DDEVTYPE_HAL,
g_mainWindow,
D3DCREATE_HARDWARE_VERTEXPROCESSING,
&presentParams,
&g_d3dDev);
if (FAILED(hr))
{
ShowD3DErrorMessage("Creating D3D device", hr);
//return 1;
}
string inputFilename(lpCmdLine);
string outputFilename(inputFilename, 0, inputFilename.rfind('.'));
outputFilename += ".cmod";
ID3DXMesh* mesh = NULL;
ID3DXBuffer* adjacency = NULL;
ID3DXBuffer* materialBuf = NULL;
ID3DXBuffer* effects = NULL;
DWORD numMaterials;
hr = D3DXLoadMeshFromX(inputFilename.c_str(),
0,
g_d3dDev,
&adjacency,
&materialBuf,
&effects,
&numMaterials,
&mesh);
if (FAILED(hr))
{
ShowD3DErrorMessage("Loading mesh from X file", hr);
return 1;
}
DWORD numVertices = mesh->GetNumVertices();
DWORD numFaces = mesh->GetNumFaces();
cout << "vertices: " << numVertices << '\n';
cout << "faces: " << numFaces << '\n';
cout << "adjacency buffer size: " << adjacency->GetBufferSize() << '\n';
ofstream meshfile(outputFilename.c_str());
// Output the header
meshfile << "#celmodel__ascii\n\n";
cout << "numMaterials=" << numMaterials << '\n';
D3DXMATERIAL* materials = reinterpret_cast<D3DXMATERIAL*>(materialBuf->GetBufferPointer());
for (DWORD mat = 0; mat < numMaterials; mat++)
{
meshfile << "material\n";
meshfile << "diffuse " << materials[mat].MatD3D.Diffuse << '\n';
//meshfile << "emissive " << materials[mat].MatD3D.Emissive << '\n';
meshfile << "specular " << materials[mat].MatD3D.Specular << '\n';
meshfile << "specpower " << materials[mat].MatD3D.Power << '\n';
meshfile << "opacity " << materials[mat].MatD3D.Diffuse.a << '\n';
meshfile << "end_material\n\n";
}
// Vertex format
D3DVERTEXELEMENT9 declElements[MAX_FVF_DECL_SIZE];
hr = mesh->GetDeclaration(declElements);
if (FAILED(hr))
{
ShowD3DErrorMessage("Checking vertex declaration", hr);
return 1;
}
DWORD stride = D3DXGetDeclVertexSize(declElements, 0);
VertexAttribute vertexMap[VertexAttribute::MaxAttribute];
CreateVertexAttributeMap(declElements, vertexMap);
meshfile << "mesh\n\n";
DumpVertexDescription(vertexMap, meshfile);
ID3DXMesh* optMesh = NULL;
ID3DXBuffer* vertexRemap = NULL;
DWORD* faceRemap = new DWORD[numFaces];
DWORD* optAdjacency = new DWORD[numFaces * 3];
hr = mesh->Optimize(D3DXMESHOPT_COMPACT | D3DXMESHOPT_STRIPREORDER,
//D3DXMESHOPT_VERTEXCACHE |
reinterpret_cast<DWORD*>(adjacency->GetBufferPointer()),
optAdjacency,
faceRemap,
&vertexRemap,
&optMesh);
if (FAILED(hr))
{
ShowD3DErrorMessage("Optimize failed: ", hr);
return 1;
}
// Attribute table
DWORD attribTableSize = 0;
hr = optMesh->GetAttributeTable(NULL, &attribTableSize);
if (FAILED(hr))
{
ShowD3DErrorMessage("Querying attribute table size", hr);
return 1;
}
D3DXATTRIBUTERANGE* attribTable = NULL;
if (attribTableSize > 0)
{
attribTable = new D3DXATTRIBUTERANGE[attribTableSize];
hr = optMesh->GetAttributeTable(attribTable, &attribTableSize);
if (FAILED(hr))
{
ShowD3DErrorMessage("Getting attribute table", hr);
return 1;
}
}
cout << "Attribute table size: " << attribTableSize << '\n';
if (attribTableSize == 1)
{
cout << "Attribute id: " << attribTable[0].AttribId << '\n';
}
if (!DumpMeshVertices(optMesh, vertexMap, stride, meshfile))
return 1;
// output the indices
for (DWORD attr = 0; attr < attribTableSize; attr++)
{
StripifyMeshSubset(optMesh, attr, meshfile);
}
meshfile << "\nend_mesh\n";
#if 0
IDirect3DIndexBuffer9* indices = NULL;
hr = mesh->GetIndexBuffer(&indices);
#endif
#if 0
// No message loop required for this app
MSG msg;
GetMessage(&msg, NULL, 0u, 0u);
while (msg.message != WM_QUIT)
{
GetMessage(&msg, NULL, 0u, 0u);
TranslateMessage(&msg);
DispatchMessage(&msg);
}
#endif
return 0;
}