AppleEHCIitdMemoryBlock*
AppleEHCIitdMemoryBlock::NewMemoryBlock(void)
{
AppleEHCIitdMemoryBlock *me = new AppleEHCIitdMemoryBlock;
IOByteCount len;
IODMACommand *dmaCommand = NULL;
UInt64 offset = 0;
IODMACommand::Segment32 segments;
UInt32 numSegments = 1;
IOReturn status = kIOReturnSuccess;
if (me)
{
// Use IODMACommand to get the physical address
dmaCommand = IODMACommand::withSpecification(kIODMACommandOutputHost32, 32, PAGE_SIZE, (IODMACommand::MappingOptions)(IODMACommand::kMapped | IODMACommand::kIterateOnly));
if (!dmaCommand)
{
USBError(1, "AppleEHCIitdMemoryBlock::NewMemoryBlock - could not create IODMACommand");
return NULL;
}
USBLog(6, "AppleEHCIitdMemoryBlock::NewMemoryBlock - got IODMACommand %p", dmaCommand);
// allocate one page on a page boundary below the 4GB line
me->_buffer = IOBufferMemoryDescriptor::inTaskWithPhysicalMask(kernel_task, kIOMemoryUnshared | kIODirectionInOut, kEHCIPageSize, kEHCIStructureAllocationPhysicalMask);
// allocate exactly one physical page
if (me->_buffer)
{
status = me->_buffer->prepare();
if (status)
{
USBError(1, "AppleEHCIitdMemoryBlock::NewMemoryBlock - could not prepare buffer");
me->_buffer->release();
me->_buffer = NULL;
me->release();
dmaCommand->release();
return NULL;
}
me->_sharedLogical = (EHCIIsochTransferDescriptorSharedPtr)me->_buffer->getBytesNoCopy();
bzero(me->_sharedLogical, kEHCIPageSize);
status = dmaCommand->setMemoryDescriptor(me->_buffer);
if (status)
{
USBError(1, "AppleEHCIitdMemoryBlock::NewMemoryBlock - could not set memory descriptor");
me->_buffer->complete();
me->_buffer->release();
me->_buffer = NULL;
me->release();
dmaCommand->release();
return NULL;
}
status = dmaCommand->gen32IOVMSegments(&offset, &segments, &numSegments);
dmaCommand->clearMemoryDescriptor();
dmaCommand->release();
if (status || (numSegments != 1) || (segments.fLength != kEHCIPageSize))
{
USBError(1, "AppleEHCIitdMemoryBlock::NewMemoryBlock - could not get physical segment");
me->_buffer->complete();
me->_buffer->release();
me->_buffer = NULL;
me->release();
return NULL;
}
me->_sharedPhysical = segments.fIOVMAddr;
}
else
{
USBError(1, "AppleEHCIitdMemoryBlock::NewMemoryBlock, could not allocate buffer!");
me->release();
me = NULL;
}
}
else
{
USBError(1, "AppleEHCIitdMemoryBlock::NewMemoryBlock, constructor failed!");
}
return me;
}
IOReturn AppleSamplePCI::generateDMAAddresses( IOMemoryDescriptor * memDesc )
{
// Get the physical segment list. These could be used to generate a scatter gather
// list for hardware.
// This is the old getPhysicalSegment() loop calling IOMemoryDescriptor,
// it will fail (panic) on new machines with memory above the 4Gb line
IODMACommand * cmd;
IOReturn err = kIOReturnSuccess;
IOByteCount offset = 0;
IOPhysicalAddress physicalAddr;
IOPhysicalLength segmentLength;
UInt32 index = 0;
while( (physicalAddr = memDesc->getPhysicalSegment( offset, &segmentLength ))) {
IOLog("Physical segment(%ld) %08lx:%08lx\n", index, physicalAddr, segmentLength);
offset += segmentLength;
index++;
}
// 64 bit physical address generation using IODMACommand
do
{
cmd = IODMACommand::withSpecification(
// outSegFunc - Host endian since we read the address data with the cpu
// and 64 bit wide quantities
kIODMACommandOutputHost64,
// numAddressBits
64,
// maxSegmentSize - zero for unrestricted physically contiguous chunks
0,
// mappingOptions - kMapped for DMA addresses
IODMACommand::kMapped,
// maxTransferSize - no restriction
0,
// alignment - no restriction
1 );
if (!cmd)
{
IOLog("IODMACommand::withSpecification failed\n");
break;
}
// point at the memory descriptor and use the auto prepare option
// to prepare the entire range
err = cmd->setMemoryDescriptor(memDesc);
if (kIOReturnSuccess != err)
{
IOLog("setMemoryDescriptor failed (0x%x)\n", err);
break;
}
UInt64 offset = 0;
while ((kIOReturnSuccess == err) && (offset < memDesc->getLength()))
{
// use the 64 bit variant to match outSegFunc
IODMACommand::Segment64 segments[1];
UInt32 numSeg = 1;
// use the 64 bit variant to match outSegFunc
err = cmd->gen64IOVMSegments(&offset, &segments[0], &numSeg);
IOLog("gen64IOVMSegments(%x) addr 0x%qx, len 0x%qx, nsegs %ld\n",
err, segments[0].fIOVMAddr, segments[0].fLength, numSeg);
}
// if we had a DMA controller, kick off the DMA here
// when the DMA has completed,
// clear the memory descriptor and use the auto complete option
// to complete the transaction
err = cmd->clearMemoryDescriptor();
if (kIOReturnSuccess != err)
{
IOLog("clearMemoryDescriptor failed (0x%x)\n", err);
}
}
while (false);
if (cmd)
cmd->release();
// end 64 bit loop
// 32 bit physical address generation using IODMACommand
// any memory above 4Gb in the memory descriptor will be buffered
// to memory below the 4G line, on machines without remapping HW support
do
{
cmd = IODMACommand::withSpecification(
// outSegFunc - Host endian since we read the address data with the cpu
// and 32 bit wide quantities
kIODMACommandOutputHost32,
// numAddressBits
32,
// maxSegmentSize - zero for unrestricted physically contiguous chunks
0,
// mappingOptions - kMapped for DMA addresses
IODMACommand::kMapped,
// maxTransferSize - no restriction
0,
// alignment - no restriction
1 );
if (!cmd)
{
IOLog("IODMACommand::withSpecification failed\n");
break;
}
// point at the memory descriptor and use the auto prepare option
// to prepare the entire range
err = cmd->setMemoryDescriptor(memDesc);
if (kIOReturnSuccess != err)
{
IOLog("setMemoryDescriptor failed (0x%x)\n", err);
break;
}
UInt64 offset = 0;
while ((kIOReturnSuccess == err) && (offset < memDesc->getLength()))
{
// use the 32 bit variant to match outSegFunc
IODMACommand::Segment32 segments[1];
UInt32 numSeg = 1;
// use the 32 bit variant to match outSegFunc
err = cmd->gen32IOVMSegments(&offset, &segments[0], &numSeg);
IOLog("gen32IOVMSegments(%x) addr 0x%lx, len 0x%lx, nsegs %ld\n",
err, segments[0].fIOVMAddr, segments[0].fLength, numSeg);
}
// if we had a DMA controller, kick off the DMA here
// when the DMA has completed,
// clear the memory descriptor and use the auto complete option
// to complete the transaction
err = cmd->clearMemoryDescriptor();
if (kIOReturnSuccess != err)
{
IOLog("clearMemoryDescriptor failed (0x%x)\n", err);
}
}
while (false);
if (cmd)
cmd->release();
// end 32 bit loop
return (err);
}
IOReturn
IOUSBController::Write(IOMemoryDescriptor *buffer, USBDeviceAddress address, Endpoint *endpoint, IOUSBCompletion *completion, UInt32 noDataTimeout, UInt32 completionTimeout, IOByteCount reqCount)
{
IOReturn err = kIOReturnSuccess;
IOUSBCommand * command = NULL;
IODMACommand * dmaCommand = NULL;
IOUSBCompletion nullCompletion;
int i;
bool isSyncTransfer = false;
USBLog(7, "%s[%p]::Write - reqCount = %qd", getName(), this, (uint64_t)reqCount);
// Validate its a outty pipe and that we have a buffer
if ((endpoint->direction != kUSBOut) || !buffer || (buffer->getLength() < reqCount))
{
USBLog(5, "%s[%p]::Write - direction is not kUSBOut (%d), No Buffer, or buffer length < reqCount (%qd < %qd). Returning kIOReturnBadArgument(0x%x)", getName(), this, endpoint->direction, (uint64_t)buffer->getLength(), (uint64_t)reqCount, kIOReturnBadArgument);
return kIOReturnBadArgument;
}
if ((endpoint->transferType != kUSBBulk) && (noDataTimeout || completionTimeout))
{
USBLog(5, "%s[%p]::Write - Pipe is NOT kUSBBulk (%d) AND specified a timeout (%d, %d). Returning kIOReturnBadArgument(0x%x)", getName(), this, endpoint->transferType, (uint32_t)noDataTimeout, (uint32_t)completionTimeout, kIOReturnBadArgument);
return kIOReturnBadArgument; // timeouts only on bulk pipes
}
// Validate the command gate
if (!_commandGate)
{
USBLog(5, "%s[%p]::Write - Could not get _commandGate. Returning kIOReturnInternalError(0x%x)", getName(), this, kIOReturnInternalError);
return kIOReturnInternalError;
}
if ( (uintptr_t) completion->action == (uintptr_t) &IOUSBSyncCompletion )
{
isSyncTransfer = true;
// 7889995 - check to see if we are on the workloop thread before setting up the IOUSBCommand
if ( _workLoop->onThread() )
{
USBError(1,"IOUSBController(%s)[%p]::Write sync request on workloop thread. Use async!", getName(), this);
return kIOUSBSyncRequestOnWLThread;
}
}
// allocate the command
command = (IOUSBCommand *)_freeUSBCommandPool->getCommand(false);
// If we couldn't get a command, increase the allocation and try again
//
if ( command == NULL )
{
IncreaseCommandPool();
command = (IOUSBCommand *)_freeUSBCommandPool->getCommand(false);
if ( command == NULL )
{
USBLog(3,"%s[%p]::Write Could not get a IOUSBCommand",getName(),this);
return kIOReturnNoResources;
}
}
// 7455477: from this point forward, we have the command object, and we need to be careful to put it back if there is an error..
if (reqCount)
{
IOMemoryDescriptor *memDesc;
dmaCommand = command->GetDMACommand();
if (!dmaCommand)
{
USBLog(1, "%s[%p]::Write - no DMA COMMAND", getName(), this);
USBTrace( kUSBTController, kTPControllerWrite, (uintptr_t)this, kIOReturnNoResources, 0, 1 );
err = kIOReturnNoResources;
}
else
{
memDesc = (IOMemoryDescriptor *)dmaCommand->getMemoryDescriptor();
if (memDesc)
{
USBLog(1, "%s[%p]::Write - dmaCommand (%p) already contains memory descriptor (%p) - clearing", getName(), this, dmaCommand, memDesc);
USBTrace( kUSBTController, kTPControllerWrite, (uintptr_t)this, (uintptr_t)dmaCommand, (uintptr_t)memDesc, 2 );
dmaCommand->clearMemoryDescriptor();
}
USBLog(7, "%s[%p]::Write - setting memory descriptor (%p) into dmaCommand (%p)", getName(), this, buffer, dmaCommand);
err = dmaCommand->setMemoryDescriptor(buffer);
if (err)
{
USBTrace( kUSBTController, kTPControllerWrite, (uintptr_t)this, err, 0, 4 );
USBLog(1, "%s[%p]::Write - err(%p) attempting to set the memory descriptor to the dmaCommand", getName(), this, (void*)err);
}
}
}
if (!err)
{
command->SetIsSyncTransfer(isSyncTransfer);
command->SetUseTimeStamp(false);
command->SetSelector(WRITE);
command->SetRequest(0); // Not a device request
command->SetAddress(address);
command->SetEndpoint(endpoint->number);
#ifdef SUPPORTS_SS_USB
command->SetStreamID(0);
#endif
command->SetDirection(kUSBOut);
command->SetType(endpoint->transferType);
command->SetBuffer(buffer);
command->SetReqCount(reqCount);
command->SetClientCompletion(*completion);
command->SetNoDataTimeout(noDataTimeout);
command->SetCompletionTimeout(completionTimeout);
command->SetMultiTransferTransaction(false);
command->SetFinalTransferInTransaction(false);
for (i=0; i < 10; i++)
command->SetUIMScratch(i, 0);
nullCompletion.target = (void *) NULL;
nullCompletion.action = (IOUSBCompletionAction) NULL;
nullCompletion.parameter = (void *) NULL;
command->SetDisjointCompletion(nullCompletion);
err = CheckForDisjointDescriptor(command, endpoint->maxPacketSize);
if (!err)
{
err = _commandGate->runAction(DoIOTransfer, command);
}
}
// 7455477: handle and and all errors which may have occured above
// If we have a sync request, then we always return the command after the DoIOTransfer. If it's an async request, we only return it if
// we get an immediate error
//
if ( isSyncTransfer || (kIOReturnSuccess != err) )
{
IOMemoryDescriptor *memDesc = dmaCommand ? (IOMemoryDescriptor *)dmaCommand->getMemoryDescriptor() : NULL;
if (!isSyncTransfer)
{
USBLog(2, "%s[%p]::Write - General error (%p) - cleaning up - command(%p) dmaCommand(%p)", getName(), this, (void*)err, command, dmaCommand);
}
if (memDesc)
{
USBLog(7, "%s[%p]::Write - General error (%p) - clearing memory descriptor (%p) from dmaCommand (%p)", getName(), this, (void*)err, memDesc, dmaCommand);
dmaCommand->clearMemoryDescriptor();
}
nullCompletion = command->GetDisjointCompletion();
if (nullCompletion.action)
{
USBLog(2, "%s[%p]::Write - SYNC xfer or immediate error with Disjoint Completion", getName(), this);
}
_freeUSBCommandPool->returnCommand(command);
}
return err;
}
IOReturn
IOUSBController::IsocIO(IOMemoryDescriptor * buffer,
UInt64 frameStart,
UInt32 numFrames,
IOUSBLowLatencyIsocFrame * frameList,
USBDeviceAddress address,
Endpoint * endpoint,
IOUSBLowLatencyIsocCompletion * completion,
UInt32 updateFrequency)
{
IOReturn err = kIOReturnSuccess;
IOUSBIsocCommand * command = NULL;
bool crossEndianRequest = false;
IODMACommand * dmaCommand = NULL;
bool syncTransfer = false;
// Validate the completion
//
USBLog(7, "%s[%p]::IsocIO(LL)", getName(), this);
if (completion == 0)
{
USBLog(1, "%s[%p]::IsocIO(LL) - No completion. Returning kIOReturnNoCompletion(0x%x)", getName(), this, kIOReturnNoCompletion);
USBTrace( kUSBTController, kTPIsocIOLL, (uintptr_t)this, kIOReturnNoCompletion, 0, 3 );
return kIOReturnNoCompletion;
}
// Validate the commandGate
//
if (_commandGate == 0)
{
USBLog(1, "%s[%p]::IsocIO(LL) - Could not get _commandGate. Returning kIOReturnInternalError(0x%x)", getName(), this, kIOReturnInternalError);
USBTrace( kUSBTController, kTPIsocIOLL, (uintptr_t)this, kIOReturnInternalError, 0, 4 );
return kIOReturnInternalError;
}
// If the high order bit of the endpoint transfer type is set, then this means it's a request from an Rosetta client
if ( endpoint->direction & 0x80 )
{
endpoint->direction &= ~0x80;
crossEndianRequest = true;
}
// Validate the direction of the endpoint -- it has to be kUSBIn or kUSBOut
if ( (endpoint->direction != kUSBOut) && ( endpoint->direction != kUSBIn) )
{
USBLog(1, "%s[%p]::IsocIO(LL) - Direction is not kUSBOut or kUSBIn (%d). Returning kIOReturnBadArgument(0x%x)", getName(), this, endpoint->direction, kIOReturnBadArgument);
USBTrace( kUSBTController, kTPIsocIOLL, (uintptr_t)this, endpoint->direction, kIOReturnBadArgument, 6 );
return kIOReturnBadArgument;
}
if ( (uintptr_t)completion->action == (uintptr_t)&IOUSBSyncIsoCompletion )
{
syncTransfer = true;
if ( _workLoop->onThread() )
{
USBError(1,"IOUSBController(%s)[%p]::DoIsocTransfer sync request on workloop thread. Use async!", getName(), this);
return kIOUSBSyncRequestOnWLThread;
}
}
command = (IOUSBIsocCommand *)_freeUSBIsocCommandPool->getCommand(false);
// If we couldn't get a command, increase the allocation and try again
//
if ( command == NULL )
{
IncreaseIsocCommandPool();
command = (IOUSBIsocCommand *)_freeUSBIsocCommandPool->getCommand(false);
if ( command == NULL )
{
USBLog(1, "%s[%p]::IsocIO(LL) Could not get a IOUSBIsocCommand", getName(), this);
USBTrace( kUSBTController, kTPIsocIOLL, (uintptr_t)this, kIOReturnNoResources, 0, 5 );
return kIOReturnNoResources;
}
}
dmaCommand = command->GetDMACommand();
if (!dmaCommand)
{
USBLog(1, "%s[%p]::IsocIO(LL) no IODMACommand in the IOUSBCommand", getName(), this);
USBTrace( kUSBTController, kTPIsocIOLL, (uintptr_t)this, kIOReturnNoResources, 0, 1 );
return kIOReturnNoResources;
}
USBLog(7, "%s[%p]::IsocIO(LL) - putting buffer %p into dmaCommand %p which has getMemoryDescriptor %p", getName(), this, buffer, command->GetDMACommand(), command->GetDMACommand()->getMemoryDescriptor());
err = dmaCommand->setMemoryDescriptor(buffer); // this automatically calls prepare()
if (err)
{
USBLog(1, "%s[%p]::IsocIO(LL) - dmaCommand[%p]->setMemoryDescriptor(%p) failed with status (%p)", getName(), this, command->GetDMACommand(), buffer, (void*)err);
USBTrace( kUSBTController, kTPIsocIOLL, (uintptr_t)this, err, 0, 2 );
_freeUSBIsocCommandPool->returnCommand(command);
return err;
}
// If the high order bit of the endpoint transfer type is set, then this means it's a request from an Rosetta client
command->SetRosettaClient(crossEndianRequest);
command->SetIsSyncTransfer(syncTransfer);
// Setup the direction
if (endpoint->direction == kUSBOut)
{
command->SetSelector(WRITE);
command->SetDirection(kUSBOut);
}
else if (endpoint->direction == kUSBIn)
{
command->SetSelector(READ);
command->SetDirection(kUSBIn);
}
command->SetUseTimeStamp(false);
command->SetAddress(address);
command->SetEndpoint(endpoint->number);
command->SetBuffer(buffer);
command->SetCompletion( * ((IOUSBIsocCompletion *) completion) );
command->SetStartFrame(frameStart);
command->SetNumFrames(numFrames);
command->SetFrameList( (IOUSBIsocFrame *) frameList);
command->SetStatus(kIOReturnBadArgument);
command->SetUpdateFrequency(updateFrequency);
command->SetLowLatency(true);
err = _commandGate->runAction(DoIsocTransfer, command);
// If we have a sync request, then we always return the command after the DoIsocTransfer. If it's an async request, we only return it if
// we get an immediate error
//
if ( syncTransfer || (kIOReturnSuccess != err) )
{
IODMACommand *dmaCommand = command->GetDMACommand();
IOMemoryDescriptor *memDesc = dmaCommand ? (IOMemoryDescriptor *)dmaCommand->getMemoryDescriptor() : NULL;
if (memDesc)
{
USBLog(7, "%s[%p]::IsocIO(LL) - sync xfer or err return - clearing memory descriptor (%p) from dmaCommand (%p)", getName(), this, memDesc, dmaCommand);
dmaCommand->clearMemoryDescriptor();
}
_freeUSBIsocCommandPool->returnCommand(command);
}
return err;
}
IOReturn
IOUSBController::CheckForDisjointDescriptor(IOUSBCommand *command, UInt16 maxPacketSize)
{
IOMemoryDescriptor *buf = command->GetBuffer();
IOBufferMemoryDescriptor *newBuf = NULL;
IOByteCount length = command->GetReqCount();
IODMACommand *dmaCommand = command->GetDMACommand();
IOByteCount segLength = 0;
IOByteCount offset = 0;
IOReturn err;
UInt64 offset64;
IODMACommand::Segment64 segment64;
UInt32 numSegments;
// USBTrace_Start( kUSBTController, kTPControllerCheckForDisjointDescriptor, (uintptr_t)this );
// Zero length buffers are valid, but they are surely not disjoint, so just return success.
//
if ( length == 0 )
return kIOReturnSuccess;
if (!dmaCommand)
{
USBLog(1, "%s[%p]::CheckForDisjointDescriptor - no dmaCommand", getName(), this);
USBTrace( kUSBTController, kTPControllerCheckForDisjointDescriptor, (uintptr_t)this, kIOReturnBadArgument, 0, 1 );
return kIOReturnBadArgument;
}
if (dmaCommand->getMemoryDescriptor() != buf)
{
USBLog(1, "%s[%p]::CheckForDisjointDescriptor - mismatched memory descriptor (%p) and dmaCommand memory descriptor (%p)", getName(), this, buf, dmaCommand->getMemoryDescriptor());
USBTrace( kUSBTController, kTPControllerCheckForDisjointDescriptor, kIOReturnBadArgument, (uintptr_t)buf, (uintptr_t)dmaCommand->getMemoryDescriptor(), 2 );
return kIOReturnBadArgument;
}
while (length)
{
offset64 = offset;
numSegments = 1;
err = dmaCommand->gen64IOVMSegments(&offset64, &segment64, &numSegments);
if (err || (numSegments != 1))
{
USBLog(1, "%s[%p]::CheckForDisjointDescriptor - err (%p) trying to generate segments at offset (%qd), length (%d), segLength (%d), total length (%d), buf (%p), numSegments (%d)", getName(), this, (void*)err, offset64, (int)length, (int)segLength, (int)command->GetReqCount(), buf, (int)numSegments);
USBTrace( kUSBTController, kTPControllerCheckForDisjointDescriptor, offset64, length, segLength, 3 );
USBTrace( kUSBTController, kTPControllerCheckForDisjointDescriptor, segLength, command->GetReqCount(), numSegments, 4 );
return kIOReturnBadArgument;
}
// 3036056 since length might be less than the length of the descriptor, we are OK if the physical
// segment is longer than we need
if (segment64.fLength >= length)
return kIOReturnSuccess; // this is the last segment, so we are OK
// since length is a 32 bit quantity, then we know from the above statement that if we are here we are 32 bit only
segLength = (IOByteCount)segment64.fLength;
// so the segment is less than the rest of the length - we need to check against maxPacketSize
if (segLength % maxPacketSize)
{
// this is the error case. I need to copy the descriptor to a new descriptor and remember that I did it
USBLog(6, "%s[%p]::CheckForDisjointDescriptor - found a disjoint segment of length (%d) MPS (%d)", getName(), this, (int)segLength, maxPacketSize);
length = command->GetReqCount(); // we will not return to the while loop, so don't worry about changing the value of length
// allocate a new descriptor which is the same total length as the old one
newBuf = IOBufferMemoryDescriptor::withOptions((command->GetDirection() == kUSBIn) ? kIODirectionIn : kIODirectionOut, length);
if (!newBuf)
{
USBLog(1, "%s[%p]::CheckForDisjointDescriptor - could not allocate new buffer", getName(), this);
USBTrace( kUSBTController, kTPControllerCheckForDisjointDescriptor, (uintptr_t)this, kIOReturnNoMemory, 0, 5 );
return kIOReturnNoMemory;
}
USBLog(7, "%s[%p]::CheckForDisjointDescriptor, obtained buffer %p of length %d", getName(), this, newBuf, (int)length);
// first close out (and complete) the original dma command descriptor
USBLog(7, "%s[%p]::CheckForDisjointDescriptor, clearing memDec (%p) from dmaCommand (%p)", getName(), this, dmaCommand->getMemoryDescriptor(), dmaCommand);
dmaCommand->clearMemoryDescriptor();
// copy the bytes to the buffer if necessary
if (command->GetDirection() == kUSBOut)
{
USBLog(7, "%s[%p]::CheckForDisjointDescriptor, copying %d bytes from desc %p to buffer %p", getName(), this, (int)length, buf, newBuf->getBytesNoCopy());
if (buf->readBytes(0, newBuf->getBytesNoCopy(), length) != length)
{
USBLog(1, "%s[%p]::CheckForDisjointDescriptor - bad copy on a write", getName(), this);
USBTrace( kUSBTController, kTPControllerCheckForDisjointDescriptor, (uintptr_t)this, 0, 0, 6 );
newBuf->release();
return kIOReturnNoMemory;
}
}
err = newBuf->prepare();
if (err)
{
USBLog(1, "%s[%p]::CheckForDisjointDescriptor - err 0x%x in prepare", getName(), this, err);
USBTrace( kUSBTController, kTPControllerCheckForDisjointDescriptor, (uintptr_t)this, err, 0, 7 );
newBuf->release();
return err;
}
err = dmaCommand->setMemoryDescriptor(newBuf);
if (err)
{
USBLog(1, "%s[%p]::CheckForDisjointDescriptor - err 0x%x in setMemoryDescriptor", getName(), this, err);
USBTrace( kUSBTController, kTPControllerCheckForDisjointDescriptor, (uintptr_t)this, err, 0, 8 );
newBuf->complete();
newBuf->release();
return err;
}
command->SetOrigBuffer(command->GetBuffer());
command->SetDisjointCompletion(command->GetClientCompletion());
USBLog(7, "%s[%p]::CheckForDisjointDescriptor - changing buffer from (%p) to (%p) and putting new buffer in dmaCommand (%p)", getName(), this, command->GetBuffer(), newBuf, dmaCommand);
command->SetBuffer(newBuf);
IOUSBCompletion completion;
completion.target = this;
completion.action = (IOUSBCompletionAction)DisjointCompletion;
completion.parameter = command;
command->SetClientCompletion(completion);
command->SetDblBufLength(length); // for the IOFree - the other buffer may change size
return kIOReturnSuccess;
}
length -= segLength; // adjust our master length pointer
offset += segLength;
}
USBLog(5, "%s[%p]::CheckForDisjointDescriptor - returning kIOReturnBadArgument(0x%x)", getName(), this, kIOReturnBadArgument);
// USBTrace_End( kUSBTController, kTPControllerCheckForDisjointDescriptor, (uintptr_t)this, kIOReturnBadArgument);
return kIOReturnBadArgument;
}