void Mask::Update(TimeValue t, Interval& valid) {
if (Param1)
{
pblock->SetValue( mask_map1_on, 0, mapOn[0]);
pblock->SetValue( mask_map2_on, 0, mapOn[1]);
pblock->SetValue( mask_invert, 0, invertMask);
Param1 = FALSE;
}
if (!ivalid.InInterval(t)) {
ivalid.SetInfinite();
pblock->GetValue( mask_map1_on, t, mapOn[0], ivalid);
pblock->GetValue( mask_map2_on, t, mapOn[1], ivalid);
pblock->GetValue( mask_invert, t, invertMask, ivalid);
NotifyDependents(FOREVER, PART_TEXMAP, REFMSG_DISPLAY_MATERIAL_CHANGE);
}
if (!mapValid.InInterval(t))
{
mapValid.SetInfinite();
for (int i=0; i<NSUBTEX; i++) {
if (subTex[i])
subTex[i]->Update(t,mapValid);
}
}
valid &= mapValid;
valid &= ivalid;
}
// This method is called before rendering begins to allow the plug-in
// to evaluate anything prior to the render so it can store this information.
void Speckle::Update(TimeValue t, Interval& ivalid) {
if (!texValidity.InInterval(t)) {
texValidity.SetInfinite();
xyzGen->Update(t, texValidity);
// pblock->GetValue(PB_COL1, t, col[0], texValidity);
pblock->GetValue(speckle_color1, t, col[0], texValidity);
col[0].ClampMinMax();
// pblock->GetValue(PB_COL2, t, col[1], texValidity);
pblock->GetValue(speckle_color2, t, col[1], texValidity);
col[1].ClampMinMax();
// pblock->GetValue(PB_SIZE, t, size, texValidity);
pblock->GetValue(speckle_size, t, size, texValidity);
pblock->GetValue(speckle_mapon1, t, mapOn[0], texValidity);
pblock->GetValue(speckle_mapon2, t, mapOn[1], texValidity);
ClampFloat(size, MIN_SIZE, MAX_SIZE);
NotifyDependents(FOREVER, PART_TEXMAP, REFMSG_DISPLAY_MATERIAL_CHANGE);
}
if (!mapValid.InInterval(t))
{
mapValid.SetInfinite();
for (int i = 0; i < NUM_SUB_TEXMAPS; i++) {
if (subTex[i])
subTex[i]->Update(t, mapValid);
}
}
ivalid &= texValidity;
ivalid &= mapValid;
}
void Noise::UpdateCache(TimeValue t)
{
//Intel's fix is to check the validity before entering the critical section, if it's valid, no need to update
if (cacheValid.InInterval(t))
return;
EnterCriticalSection(&csect);
if (!cacheValid.InInterval(t)) {
ComputeAvgValue();
cacheValid = ivalid;
}
LeaveCriticalSection(&csect);
}
Point3 PBombField::Force(TimeValue t,const Point3 &pos, const Point3 &vel,int index)
{ float d,chaos,dv;
Point3 dlta,xb,yb,zb,center,expv;
int decaytype,symm;
Point3 zero=Zero;
fValid = FOREVER;
if (!tmValid.InInterval(t))
{ tmValid = FOREVER;
tm = node->GetObjectTM(t,&tmValid);
invtm = Inverse(tm);
}
xb=tm.GetRow(0);
yb=tm.GetRow(1);
zb=tm.GetRow(2);
center=tm.GetTrans();
fValid &= tmValid;
TimeValue t0,t2,lastsfor;
obj->pblock->GetValue(PB_STARTTIME,t,t0,fValid);
obj->pblock->GetValue(PB_LASTSFOR,t,lastsfor,fValid);
t2=t0+lastsfor;
dlta=Zero;
if ((t>=t0)&&(t<=t2))
{ float L=Length(dlta=pos-center);
obj->pblock->GetValue(PB_DECAY,t,d,fValid);
obj->pblock->GetValue(PB_DECAYTYPE,t,decaytype,fValid);
if ((decaytype==0)||(L<=d))
{ obj->pblock->GetValue(PB_DELTA_V,t,dv,fValid);
obj->pblock->GetValue(PB_CHAOS,t,chaos,fValid);
obj->pblock->GetValue(PB_SYMMETRY,t,symm,fValid);
Point3 r;
if (symm==SPHERE)
expv=(r=dlta/L);
else if (symm==PLANAR)
{ L=DotProd(dlta,zb);
expv=(L<0.0f?L=-L,-zb:zb);
}
else
{ Point3 E;
E=DotProd(dlta,xb)*xb+DotProd(dlta,yb)*yb;
L=Length(E);
expv=E/L;
}
dlta=(dv*expv)/(float)dtsq;
if (decaytype==1)
dlta*=(d-L)/d;
else if (decaytype==2)
dlta*=(1/(float)exp(L/d));
if ((!FloatEQ0(chaos))&&(lastsfor==0.0f))
{ float theta;
theta=HalfPI*chaos*RND01();
// Martell 4/14/01: Fix for order of ops bug.
float ztmp=RND11(); float ytmp=RND11(); float xtmp=RND11();
Point3 d=Point3(xtmp,ytmp,ztmp);
Point3 c=Normalize(dlta^d);
RotateOnePoint(&dlta.x,&zero.x,&c.x,theta);
}
} else dlta=Zero;
}
return dlta;
}
// This method is called before rendering begins to allow the plug-in
// to evaluate anything prior to the render so it can store this information.
void Stucco::Update(TimeValue t, Interval& ivalid) {
if (!texValidity.InInterval(t)) {
texValidity.SetInfinite();
xyzGen->Update(t, texValidity);
// pblock->GetValue(PB_COL1, t, col[0], texValidity);
pblock->GetValue(stucco_color1, t, col[0], texValidity);
col[0].ClampMinMax();
// pblock->GetValue(PB_COL2, t, col[1], texValidity);
pblock->GetValue(stucco_color2, t, col[1], texValidity);
col[1].ClampMinMax();
// pblock->GetValue(PB_SIZE, t, size, texValidity);
pblock->GetValue(stucco_size, t, size, texValidity);
ClampFloat(size, MIN_SIZE, MAX_SIZE);
// pblock->GetValue(PB_THRESH, t, thresh, texValidity);
pblock->GetValue(stucco_threshold, t, thresh, texValidity);
ClampFloat(thresh, MIN_THRESH, MAX_THRESH);
// pblock->GetValue(PB_THICK, t, thick, texValidity);
pblock->GetValue(stucco_thickness, t, thick, texValidity);
pblock->GetValue(stucco_mapon1, t, mapOn[0], texValidity);
pblock->GetValue(stucco_mapon2, t, mapOn[1], texValidity);
ClampFloat(thick, MIN_THICK, MAX_THICK);
for (int i = 0; i < NUM_SUB_TEXMAPS; i++) {
if (subTex[i])
subTex[i]->Update(t, texValidity);
}
}
ivalid &= texValidity;
}
// This method is called before rendering begins to allow the plug-in
// to evaluate anything prior to the render so it can store this information.
void Planet::Update(TimeValue t, Interval& ivalid) {
if (!texValidity.InInterval(t)) {
texValidity.SetInfinite();
xyzGen->Update(t, texValidity);
for (int i = 0; i < NUM_COLORS; i++) {
// pblock->GetValue(i+PB_COL1, t, col[i], texValidity);
pblock->GetValue(i+planet_color1, t, col[i], texValidity);
col[i].ClampMinMax();
}
// pblock->GetValue(PB_SIZE, t, size, texValidity);
pblock->GetValue(planet_size, t, size, texValidity);
ClampFloat(size, MIN_SIZE, MAX_SIZE);
// pblock->GetValue(PB_ISLAND, t, island, texValidity);
pblock->GetValue(planet_island, t, island, texValidity);
ClampFloat(island, MIN_ISLAND, MAX_ISLAND);
// pblock->GetValue(PB_PERCENT, t, percent, texValidity);
pblock->GetValue(planet_percent, t, percent, texValidity);
ClampFloat(percent, MIN_PERCENT, MAX_PERCENT);
land = percent/100.0f;
// pblock->GetValue(PB_SEED, t, seed, texValidity);
pblock->GetValue(planet_seed, t, seed, texValidity);
ClampInt(seed, (int) MIN_SEED, (int) MAX_SEED);
pblock->GetValue(planet_blend, t, blend, texValidity);
}
ivalid &= texValidity;
}
// This method is called before rendering begins to allow the plug-in
// to evaluate anything prior to the render so it can store this information.
void Splat::Update(TimeValue t, Interval& ivalid) {
if (!texValidity.InInterval(t)) {
texValidity.SetInfinite();
xyzGen->Update(t, texValidity);
// pblock->GetValue(PB_COL1, t, col[0], texValidity);
pblock->GetValue(splat_color1, t, col[0], texValidity);
col[0].ClampMinMax();
// pblock->GetValue(PB_COL2, t, col[1], texValidity);
pblock->GetValue(splat_color2, t, col[1], texValidity);
col[1].ClampMinMax();
// pblock->GetValue(PB_SIZE, t, size, texValidity);
pblock->GetValue(splat_size, t, size, texValidity);
ClampFloat(size, MIN_SIZE, MAX_SIZE);
// pblock->GetValue(PB_THRESH, t, thresh, texValidity);
pblock->GetValue(splat_threshold, t, thresh, texValidity);
ClampFloat(thresh, MIN_THRESH, MAX_THRESH);
// pblock->GetValue(PB_ITER, t, iter, texValidity);
pblock->GetValue(splat_iteration, t, iter, texValidity);
pblock->GetValue(splat_mapon1, t, mapOn[0], texValidity);
pblock->GetValue(splat_mapon2, t, mapOn[1], texValidity);
ClampInt(iter, (int) MIN_ITER, (int) MAX_ITER);
for (int i = 0; i < NUM_SUB_TEXMAPS; i++) {
if (subTex[i])
subTex[i]->Update(t, texValidity);
}
}
ivalid &= texValidity;
}
void OrenNayarBlinnShader::Update(TimeValue t, Interval &valid) {
Point3 p, p2;
if( inUpdate )
return;
inUpdate = TRUE;
if (!ivalid.InInterval(t)) {
ivalid.SetInfinite();
// pblock->GetValue( onb_ambient, t, p, ivalid );
// ambient = LimitColor(Color(p.x,p.y,p.z));
pblock->GetValue( onb_diffuse, t, p, ivalid );
diffuse= LimitColor(Color(p.x,p.y,p.z));
pblock->GetValue( onb_ambient, t, p2, ivalid );
if( lockAD && (p!=p2)){
pblock->SetValue( onb_ambient, t, diffuse);
ambient = diffuse;
} else {
pblock->GetValue( onb_ambient, t, p, ivalid );
ambient = Bound(Color(p.x,p.y,p.z));
}
pblock->GetValue( onb_specular, t, p2, ivalid );
if( lockDS && (p!=p2)){
pblock->SetValue( onb_specular, t, diffuse);
specular = diffuse;
} else {
pblock->GetValue( onb_specular, t, p, ivalid );
specular = Bound(Color(p.x,p.y,p.z));
}
// pblock->GetValue( onb_specular, t, p, ivalid );
// specular = LimitColor(Color(p.x,p.y,p.z));
pblock->GetValue( onb_glossiness, t, glossiness, ivalid );
LIMIT0_1(glossiness);
pblock->GetValue( onb_specular_level, t, specularLevel, ivalid );
LIMITMINMAX(specularLevel,0.0f,9.99f);
pblock->GetValue( onb_soften, t, softThresh, ivalid);
LIMIT0_1(softThresh);
pblock->GetValue( onb_self_illum_amnt, t, selfIllum, ivalid );
LIMIT0_1(selfIllum);
pblock->GetValue( onb_self_illum_color, t, p, ivalid );
selfIllumClr = LimitColor(Color(p.x,p.y,p.z));
pblock->GetValue( onb_diffuse_level, t, diffLevel, ivalid );
LIMITMINMAX(diffLevel,0.0f, 4.00f);
pblock->GetValue( onb_roughness, t, diffRough, ivalid );
LIMIT0_1(diffRough);
// also get the non-animatables in case changed from scripter or other pblock accessors
pblock->GetValue(onb_ds_lock, t, lockDS, ivalid);
pblock->GetValue(onb_ad_lock, t, lockAD, ivalid);
pblock->GetValue(onb_ad_texlock, t, lockADTex, ivalid);
pblock->GetValue(onb_use_self_illum_color, t, selfIllumClrOn, ivalid);
curTime = t;
}
valid &= ivalid;
inUpdate = FALSE;
}
void OrientConstRotation::GetValue(TimeValue t, void *val, Interval &valid, GetSetMethod method)
{
if (firstTimeFlag) {
Point3 trans, scaleP;
Quat quat;
Matrix3 tempMat(1);
// CAL-9/26/2002: in absolute mode the value could be un-initialized (random value).
if (method == CTRL_RELATIVE) tempMat = *(Matrix3*)val;
DecomposeMatrix(tempMat, trans, quat, scaleP);
baseRotQuatWorld = baseRotQuatLocal * quat;
baseRotQuatWorld.Normalize();
firstTimeFlag = 0;
}
if (!ivalid.InInterval(t)) {
DbgAssert(val != NULL);
Update(t);
}
valid &= ivalid;
if (method==CTRL_RELATIVE) {
Interval iv;
if (IsLocal()){ // From Update, I'm getting target_local_TM in curRot
Matrix3 *mat = (Matrix3*)val; // this is source_Parent_TM
Quat q = curRot; // this is target_local_TM
PreRotateMatrix(*mat, q); // source_world_TM = source_Parent_TM * target_local_TM
}
else { // i.e., WorldToWorld: from Update, I'm getting target_world_TM in curRot
int ct = pblock->Count(orientation_target_list);;
if (ct < 1){
Matrix3 *mat = (Matrix3*)val;
Quat q = curRot;
PreRotateMatrix(*mat, q);
}
else{
Matrix3 *mat = (Matrix3*)val; // this is source_Parent_TM
// CAL-06/24/02: preserve all components and replace with the new orientation.
AffineParts ap;
decomp_affine( *mat, &ap );
ap.q = curRot; // target world rotation
comp_affine( ap, *mat );
// CAL-06/24/02: this only preserve the translation component
// Point3 tr;
// tr = mat->GetTrans();
// mat->IdentityMatrix();
// Quat q = curRot; // this is target_world_TM
// q.MakeMatrix(*mat);
// mat->SetTrans(tr);
}
}
}
else {
*((Quat*)val) = curRot;
}
// RedrawListbox(GetCOREInterface()->GetTime());
}
DWORD_PTR Speckle::GetActiveTexHandle(TimeValue t, TexHandleMaker& thmaker) {
if (texHandle) {
if (texHandleValid.InInterval(t))
return texHandle->GetHandle();
else DiscardTexHandle();
}
texHandle = thmaker.MakeHandle(GetVPDisplayDIB(t,thmaker,texHandleValid));
return texHandle->GetHandle();
}
void StraussShader::Update(TimeValue t, Interval &valid) {
Point3 p;
if (!ivalid.InInterval(t)) {
ivalid.SetInfinite();
pblock->GetValue( st_diffuse, t, p, ivalid );
diffuse= Bound(Color(p.x,p.y,p.z));
pblock->GetValue( st_glossiness, t, glossiness, ivalid );
glossiness = Bound(glossiness );
pblock->GetValue( st_metalness, t, metalness, ivalid );
metalness = Bound(metalness );
}
valid &= ivalid;
}
// This method is called before rendering begins to allow the plug-in
// to evaluate anything prior to the render so it can store this information.
void Smoke::Update(TimeValue t, Interval& ivalid) {
if (!texValidity.InInterval(t)) {
texValidity.SetInfinite();
xyzGen->Update(t, texValidity);
// pblock->GetValue(PB_COL1, t, col[0], texValidity);
pblock->GetValue(smoke_color1, t, col[0], texValidity);
col[0].ClampMinMax();
// pblock->GetValue(PB_COL2, t, col[1], texValidity);
pblock->GetValue(smoke_color2, t, col[1], texValidity);
col[1].ClampMinMax();
// pblock->GetValue(PB_SIZE, t, size, texValidity);
pblock->GetValue(smoke_size, t, size, texValidity);
ClampFloat(size, MIN_SIZE, MAX_SIZE);
// pblock->GetValue(PB_EXP, t, power, texValidity);
pblock->GetValue(smoke_exponent, t, power, texValidity);
ClampFloat(power, MIN_EXP, MAX_EXP);
// pblock->GetValue(PB_PHASE, t, phase, texValidity);
// pblock->GetValue(PB_ITER, t, iter, texValidity);
pblock->GetValue(smoke_phase, t, phase, texValidity);
pblock->GetValue(smoke_iteration, t, iter, texValidity);
ClampInt(iter, (int) MIN_ITER, (int) MAX_ITER);
pblock->GetValue(smoke_mapon1, t, mapOn[0], texValidity);
pblock->GetValue(smoke_mapon2, t, mapOn[1], texValidity);
NotifyDependents(FOREVER, PART_TEXMAP, REFMSG_DISPLAY_MATERIAL_CHANGE);
}
if (!mapValid.InInterval(t))
{
mapValid.SetInfinite();
for (int i = 0; i < NUM_SUB_TEXMAPS; i++) {
if (subTex[i])
subTex[i]->Update(t, mapValid);
}
}
ivalid &= texValidity;
ivalid &= mapValid;
}
void Composite::Update(TimeValue t, Interval& valid)
{
if (!ivalid.InInterval(t)) {
ivalid.SetInfinite();
int n = pblock->Count(comptex_ons);
if (n!=mapOn.Count()) mapOn.SetCount(n);
for (int i=0; i<subTex.Count(); i++) {
pblock->GetValue(comptex_ons,0,mapOn[i],valid,i);
if (subTex[i])
subTex[i]->Update(t,ivalid);
}
}
valid &= ivalid;
}
void WardShader::Update(TimeValue t, Interval &valid) {
Point3 p, p2;
if( inUpdate )
return;
inUpdate = TRUE;
if (!ivalid.InInterval(t)) {
ivalid.SetInfinite();
// pblock->GetValue( PB_AMBIENT_CLR, t, p, ivalid );
// ambient = LimitColor(Color(p.x,p.y,p.z));
pblock->GetValue( PB_DIFFUSE_CLR, t, p, ivalid );
diffuse= LimitColor(Color(p.x,p.y,p.z));
pblock->GetValue( PB_AMBIENT_CLR, t, p2, ivalid );
if( lockAD && (p!=p2)){
pblock->SetValue( PB_AMBIENT_CLR, t, diffuse);
ambient = diffuse;
} else {
pblock->GetValue( PB_AMBIENT_CLR, t, p, ivalid );
ambient = Bound(Color(p.x,p.y,p.z));
}
pblock->GetValue( PB_SPECULAR_CLR, t, p2, ivalid );
if( lockDS && (p!=p2)){
pblock->SetValue( PB_SPECULAR_CLR, t, diffuse);
specular = diffuse;
} else {
pblock->GetValue( PB_SPECULAR_CLR, t, p, ivalid );
specular = Bound(Color(p.x,p.y,p.z));
}
// pblock->GetValue( PB_SPECULAR_CLR, t, p, ivalid );
// specular = LimitColor(Color(p.x,p.y,p.z));
pblock->GetValue( PB_GLOSSINESS_X, t, glossinessX, ivalid );
LIMITMINMAX(glossinessX, 0.0001f, 1.0f );
pblock->GetValue( PB_GLOSSINESS_Y, t, glossinessY, ivalid );
LIMITMINMAX(glossinessY, 0.0001f, 1.0f );
pblock->GetValue( PB_SPECULAR_LEV, t, specLevel, ivalid );
LIMITMINMAX(specLevel,0.0f,4.00f);
pblock->GetValue( PB_DIFFUSE_LEV, t, diffLevel, ivalid );
LIMITMINMAX(diffLevel,0.0f,2.0f);
curTime = t;
}
valid &= ivalid;
inUpdate = FALSE;
}
Point3 PinField::Force(TimeValue t,const Point3 &pos, const Point3 &vel,int index) //ok
{ fValid= FOREVER;
if (!tmValid.InInterval(t))
{ tmValid=FOREVER;
tm=node->GetObjectTM(t,&tmValid);
invtm=Inverse(tm);
}
fValid&=tmValid;
TimeValue t1,t2;
obj->pblock->GetValue(PB_ONTIME,t,t1,fValid);
obj->pblock->GetValue(PB_OFFTIME,t,t2,fValid);
Point3 OutPin;
if ((t>=t1)&&(t<=t2))
OutPin = Zero;
else
OutPin = Zero;
return OutPin*6.25e-03f;
}
void Plate::Update(TimeValue t, Interval& valid) {
if (!ivalid.InInterval(t)) {
ivalid.SetInfinite();
pblock->GetValue( plate_blur, t, blur, ivalid );
pblock->GetValue( plate_reframt, t, refrAmt, ivalid);
pblock->GetValue( plate_thick, t, thick, ivalid);
pblock->GetValue( plate_apply, t, applyBlur, ivalid );
pblock->GetValue( plate_nthframe, t, nth, ivalid);
pblock->GetValue( plate_useenviroment, t, useEnvMap, ivalid);
pblock->GetValue( plate_frame, t, do_nth, ivalid);
}
valid &= ivalid;
}
// This method is called before rendering begins to allow the plug-in
// to evaluate anything prior to the render so it can store this information.
void Water::Update(TimeValue t, Interval& ivalid) {
if (!texValidity.InInterval(t)) {
texValidity.SetInfinite();
xyzGen->Update(t, texValidity);
// pblock->GetValue(PB_COL1, t, col[0], texValidity);
pblock->GetValue(water_color1, t, col[0], texValidity);
col[0].ClampMinMax();
// pblock->GetValue(PB_COL2, t, col[1], texValidity);
pblock->GetValue(water_color2, t, col[1], texValidity);
col[1].ClampMinMax();
// pblock->GetValue(PB_NUM, t, count, texValidity);
pblock->GetValue(water_num, t, count, texValidity);
ClampInt(count, (int) MIN_NUM, (int) MAX_NUM);
// pblock->GetValue(PB_SIZE, t, size, texValidity);
pblock->GetValue(water_size, t, size, texValidity);
ClampFloat(size, MIN_SIZE, MAX_SIZE);
// pblock->GetValue(PB_LEN_MIN, t, minperiod, texValidity);
pblock->GetValue(water_len_min, t, minperiod, texValidity);
ClampFloat(minperiod, MIN_LEN_MIN, MAX_LEN_MIN); // > 6/11/02 - 2:42pm --MQM-- typo, was MIN_LEN_MIN, MAX_LEN_MAX
// pblock->GetValue(PB_LEN_MAX, t, maxperiod, texValidity);
pblock->GetValue(water_len_max, t, maxperiod, texValidity);
ClampFloat(maxperiod, MIN_LEN_MAX, MAX_LEN_MAX);
// pblock->GetValue(PB_AMP, t, amp, texValidity);
pblock->GetValue(water_amp, t, amp, texValidity);
ClampFloat(amp, MIN_AMP, MAX_AMP);
// pblock->GetValue(PB_PHASE, t, phase, texValidity);
// pblock->GetValue(PB_TYPE, t, type, texValidity);
pblock->GetValue(water_phase, t, phase, texValidity);
pblock->GetValue(water_type, t, type, texValidity);
for (int i = 0; i < NUM_SUB_TEXMAPS; i++) {
if (subTex[i])
subTex[i]->Update(t, texValidity);
// pblock->GetValue(PB_SEED, t, randSeed, texValidity);
pblock->GetValue(water_seed, t, randSeed, texValidity);
pblock->GetValue(water_mapon1, t, mapOn[0], texValidity);
pblock->GetValue(water_mapon2, t, mapOn[1], texValidity);
ReInit();
}
}
ivalid &= texValidity;
}
void Gradient::Update(TimeValue t, Interval& valid)
{
if (!ivalid.InInterval(t)) {
ivalid.SetInfinite();
uvGen->Update(t,ivalid);
texout->Update(t,ivalid);
pblock->GetValue( grad_color1, t, col[0], ivalid );
col[0].ClampMinMax();
pblock->GetValue( grad_color2, t, col[1], ivalid );
col[1].ClampMinMax();
pblock->GetValue( grad_color3, t, col[2], ivalid );
col[2].ClampMinMax();
pblock->GetValue( grad_map1_on, t, mapOn[0], ivalid);
pblock->GetValue( grad_map2_on, t, mapOn[1], ivalid);
pblock->GetValue( grad_map3_on, t, mapOn[2], ivalid);
pblock->GetValue( grad_type, t, type, ivalid );
pblock->GetValue( grad_noise_type, t, noiseType, ivalid );
pblock->GetValue( grad_amount, t, amount, ivalid );
pblock->GetValue( grad_size, t, size, ivalid );
pblock->GetValue( grad_phase, t, phase, ivalid );
pblock->GetValue( grad_center, t, center, ivalid );
pblock->GetValue( grad_levels, t, levels, ivalid );
pblock->GetValue( grad_high_thresh, t, high, ivalid );
pblock->GetValue( grad_low_thresh, t, low, ivalid );
pblock->GetValue( grad_thresh_smooth, t, smooth, ivalid );
if (low>high) {
float temp = low;
low = high;
high = temp;
}
hminusl = (high-low);
sd = hminusl*0.5f*smooth;
if (size!=0.0f) size1 = 20.0f/size;
else size1 = 0.0f;
for (int i=0; i<NSUBTEX; i++) {
if (subTex[i])
subTex[i]->Update(t,ivalid);
}
EnableStuff();
}
valid &= ivalid;
}
void Output::Update(TimeValue t, Interval& valid) {
if (Param1)
{
pblock->SetValue( output_map1_on, 0, mapOn[0]);
Param1 = FALSE;
}
if (!ivalid.InInterval(t)) {
ivalid.SetInfinite();
texout->Update(t,ivalid);
pblock->GetValue( output_map1_on, t, mapOn[0], ivalid);
for (int i=0; i<NSUBTEX; i++) {
if (subTex[i])
subTex[i]->Update(t,ivalid);
}
}
valid &= ivalid;
}
Point3 PinField::Force(TimeValue t,const Point3 &pos, const Point3 &vel,int index) //ok
{ fValid= FOREVER;
if (!tmValid.InInterval(t))
{ tmValid=FOREVER;
tm=node->GetObjectTM(t,&tmValid);
invtm=Inverse(tm);
}
fValid&=tmValid;
TimeValue t1,t2;
if (obj == NULL) return Point3(0.0f,0.0f,0.0f); //667105 watje xrefs can change the base object type through proxies which will cause this to be null or the user can copy a new object type over ours
obj->pblock->GetValue(PB_ONTIME,t,t1,fValid);
obj->pblock->GetValue(PB_OFFTIME,t,t2,fValid);
Point3 OutPin;
if ((t>=t1)&&(t<=t2))
OutPin = Zero;
else
OutPin = Zero;
return OutPin*6.25e-03f;
}
void Noise::Update(TimeValue t, Interval& valid) {
if (pblock == NULL) return;
if (!ivalid.InInterval(t)) {
ivalid.SetInfinite();
if (xyzGen != NULL)
xyzGen->Update(t,ivalid);
if (texout != NULL)
texout->Update(t,ivalid);
pblock->GetValue( noise_color1, t, col[0], ivalid );
col[0].ClampMinMax();
pblock->GetValue( noise_color2, t, col[1], ivalid );
col[1].ClampMinMax();
pblock->GetValue( noise_size, t, size, ivalid );
pblock->GetValue( noise_phase, t, phase, ivalid );
pblock->GetValue( noise_levels, t, levels, ivalid );
for (int i=0; i<NSUBTEX; i++) {
if (subTex[i])
subTex[i]->Update(t,ivalid);
}
pblock->GetValue( noise_hithresh, t, high, ivalid );
pblock->GetValue( noise_lowthresh, t, low, ivalid );
if (high<low) {
float tmp = low;
low = high;
high = tmp;
}
pblock->GetValue( noise_map1_on, t, mapOn[0], ivalid);
pblock->GetValue( noise_map2_on, t, mapOn[1], ivalid);
pblock->GetValue( noise_type, t, noiseType, ivalid);
//ComputeAvgValue(); // moved to UpdateCache DDS 10/3/00
EnableStuff();
}
valid &= ivalid;
}
// This method is called before rendering begins to allow the plug-in
// to evaluate anything prior to the render so it can store this information.
void Speckle::Update(TimeValue t, Interval& ivalid) {
if (!texValidity.InInterval(t)) {
texValidity.SetInfinite();
xyzGen->Update(t, texValidity);
// pblock->GetValue(PB_COL1, t, col[0], texValidity);
pblock->GetValue(speckle_color1, t, col[0], texValidity);
col[0].ClampMinMax();
// pblock->GetValue(PB_COL2, t, col[1], texValidity);
pblock->GetValue(speckle_color2, t, col[1], texValidity);
col[1].ClampMinMax();
// pblock->GetValue(PB_SIZE, t, size, texValidity);
pblock->GetValue(speckle_size, t, size, texValidity);
pblock->GetValue(speckle_mapon1, t, mapOn[0], texValidity);
pblock->GetValue(speckle_mapon2, t, mapOn[1], texValidity);
ClampFloat(size, MIN_SIZE, MAX_SIZE);
for (int i = 0; i < NUM_SUB_TEXMAPS; i++) {
if (subTex[i])
subTex[i]->Update(t, texValidity);
}
}
ivalid &= texValidity;
}
DWORD UVtex::GetActiveTexHandle(TimeValue t, TexHandleMaker& thmaker) {
#endif
if (texHandle) {
if (texHandleValid.InInterval(t))
return texHandle->GetHandle();
else DiscardTexHandle();
}
Interval v;
Update(t,v);
Bitmap *bm;
bm = BuildBitmap(thmaker.Size());
texHandle = thmaker.CreateHandle(bm);
bm->DeleteThis();
texHandleValid.SetInfinite();
int i;
pblock->GetValue(uv_uvchannel, t, i, texHandleValid);
pblock->GetValue(uv_rtype, t, i, texHandleValid);
pblock->GetValue(uv_gtype, t, i, texHandleValid);
pblock->GetValue(uv_btype, t, i, texHandleValid);
pblock->GetValue(uv_rcount, t, i, texHandleValid);
pblock->GetValue(uv_gcount, t, i, texHandleValid);
pblock->GetValue(uv_bcount, t, i, texHandleValid);
float f;
pblock->GetValue(uv_tintAmount, t, f, texHandleValid);
pblock->GetValue(uv_rAmount, t, f, texHandleValid);
pblock->GetValue(uv_gAmount, t, f, texHandleValid);
pblock->GetValue(uv_bAmount, t, f, texHandleValid);
Color c;
pblock->GetValue(uv_tintColor, t, c, texHandleValid);
BOOL b;
pblock->GetValue(uv_clampUVW, t, b, texHandleValid);
return texHandle->GetHandle();
}
void UVtex::Update(TimeValue t, Interval& valid) {
EnterCriticalSection(&csect);
if (!ivalid.InInterval(t)) {
ivalid = FOREVER;
pblock->GetValue(uv_uvchannel,t,uvChannel,ivalid);
#if MAX_RELEASE > 3100
uvChannel = Clamp(uvChannel, -NUM_HIDDENMAPS, (MAX_MESHMAPS-1));
#else
uvChannel = Clamp(uvChannel);
#endif
pblock->GetValue(uv_rtype,t,rType,ivalid);
rType = Clamp(rType, 0, 1);
pblock->GetValue(uv_gtype,t,gType,ivalid);
gType = Clamp(gType, 0, 1);
pblock->GetValue(uv_btype,t,bType,ivalid);
bType = Clamp(bType, 0, 1);
pblock->GetValue(uv_rcount,t,rCount,ivalid);
rCount = Clamp(rCount, 0, 1000);
pblock->GetValue(uv_gcount,t,gCount,ivalid);
gCount = Clamp(gCount, 0, 1000);
pblock->GetValue(uv_bcount,t,bCount,ivalid);
bCount = Clamp(bCount, 0, 1000);
pblock->GetValue(uv_tintColor,t,tintColor,ivalid);
pblock->GetValue(uv_tintAmount,t,tintAmount,ivalid);
tintAmount = Clamp(tintAmount);
pblock->GetValue(uv_rAmount,t,rAmount,ivalid);
rAmount = Clamp(rAmount);
pblock->GetValue(uv_gAmount,t,gAmount,ivalid);
gAmount = Clamp(gAmount);
pblock->GetValue(uv_bAmount,t,bAmount,ivalid);
bAmount = Clamp(bAmount);
pblock->GetValue(uv_clampUVW,t,clampUVW,ivalid);
}
valid &= ivalid;
LeaveCriticalSection(&csect);
}
Point3 PtForceField::Force(TimeValue t,const Point3 &pos, const Point3 &vel,int index)
{ Point3 ApplyAt,OutForce,zdir;
fValid= FOREVER;
if (!tmValid.InInterval(t))
{ tmValid=FOREVER;
tm=node->GetObjectTM(t,&tmValid);
invtm=Inverse(tm);
}
ApplyAt=tm.GetTrans();
fValid&=tmValid;
TimeValue t1,t2;
if (obj == NULL) return Point3(0.0f,0.0f,0.0f); //667105 watje xrefs can change the base object type through proxies which will cause this to be null or the user can copy a new object type over ours
obj->pblock->GetValue(PB_ONTIME,t,t1,fValid);
obj->pblock->GetValue(PB_OFFTIME,t,t2,fValid);
if ((t>=t1)&&(t<=t2))
{ float BaseF;
zdir=tm.GetRow(2);
obj->pblock->GetValue(PB_STRENGTH,t,BaseF,fValid); //assume N
int tpf=GetTicksPerFrame();
//int tpf2=tpf*tpf;
int tps=TIME_TICKSPERSEC;
int tps2=tps*tps;
//int FToTick=(int)((float)tps/(float)GetFrameRate());
BaseF/=(float)tps2;//convert to kg-m/t2
BaseF*=100.0f; //convert to kg-cm/t2
int UnitsVal;
obj->pblock->GetValue(PB_UNITS,t,UnitsVal,fValid);
if (UnitsVal!=0) BaseF*=4.4591f; //lbf is this much larger than N=kg-m/s2
TimeValue tage=t-t1;
TimeValue Per1,Per2;
obj->pblock->GetValue(PB_TIMEPER1,t,Per1,fValid);
obj->pblock->GetValue(PB_TIMEPER2,t,Per2,fValid);
float scalefactor=1.0f;
int sintoggle;
obj->pblock->GetValue(PB_ENABLESINES,t,sintoggle,fValid);
if (sintoggle)
{ if (Per1>0)
{ float phase1,amp1;
float relage1=(float)tage/(float)Per1;
obj->pblock->GetValue(PB_PHASPER1,t,phase1,fValid);
obj->pblock->GetValue(PB_AMP1,t,amp1,fValid);
scalefactor+=0.01f*amp1*(float)sin(TWOPI*relage1+phase1);
}
if (Per2>0)
{ float phase2,amp2;
float relage2=(float)tage/(float)Per2;
obj->pblock->GetValue(PB_PHASPER2,t,phase2,fValid);
obj->pblock->GetValue(PB_AMP2,t,amp2,fValid);
scalefactor+=0.01f*amp2*(float)sin(TWOPI*relage2+phase2);
}
}
int feedback;
obj->pblock->GetValue(PB_FEEDBACKON,t,feedback,fValid);
float scalefactorg=1.0f;
if (feedback)
{ float targetspeed,loopgain;
obj->pblock->GetValue(PB_TARGETVEL,t,targetspeed,fValid);
targetspeed/=(float)tpf;
obj->pblock->GetValue(PB_CONTROLGAIN,t,loopgain,fValid);
float diffspeed=targetspeed-DotProd(vel,zdir);
//scalefactorg*=diffspeed*loopgain/(float)tpf;
scalefactorg*=diffspeed*loopgain/100.0f;
int revon;
obj->pblock->GetValue(PB_REVERSIBLE,t,revon,fValid);
if ((!revon)&&(scalefactorg<0.0f)) scalefactorg=0.0f;
}
OutForce=zdir*BaseF*scalefactor*scalefactorg;
int rangeon;
obj->pblock->GetValue(PB_RANGEON,t,rangeon,fValid);
if (rangeon)
{ float maxrange;
obj->pblock->GetValue(PB_RANGEVAL,t,maxrange,fValid);
float distance=Length(ApplyAt-pos);
if (distance<maxrange)
{ if (maxrange>FLOAT_EPSILON) OutForce*=(1.0f-distance/maxrange);
else OutForce=Zero;
}
else OutForce=Zero;
}
}
else OutForce=Zero;
return OutForce*6.25e-03f;
}
void Composite::SetupGfxMultiMaps(TimeValue t, Material *mtl, MtlMakerCallback &cb)
{
Interval valid;
Texmap *sub[MAXTEXHANDLES];
int texOp;
IHardwareMaterial *pIHWMat = (IHardwareMaterial *)GetProperty(PROPID_HARDWARE_MATERIAL);
if (pIHWMat) {
// This is only true if Direct3D is in use
if (texHandleValid.InInterval(t)) {
pIHWMat->SetNumTexStages(numTexHandlesUsed);
int nt = numTexHandlesUsed;
if (numTexHandlesUsed == 1) {
texOp = TX_MODULATE;
}
else {
texOp = TX_ALPHABLEND;
}
for (int i = 0; i < nt; i++) {
if (texHandle[i]) {
pIHWMat->SetTexture(i, texHandle[i]->GetHandle());
// Kludge to pass in the TextureStage number
mtl->texture[0].useTex = i;
cb.GetGfxTexInfoFromTexmap(t, mtl->texture[0], subTex[useSubForTex[i]]);
SetHWTexOps(pIHWMat, i, texOp);
}
}
return;
}
else {
DiscardTexHandles();
}
int forceW = 0;
int forceH = 0;
int nsupport = cb.NumberTexturesSupported();
nsupport = (nsupport > MAXTEXHANDLES) ? MAXTEXHANDLES : nsupport;
numTexHandlesUsed = 0;
for (int i = 0; i < MAXTEXHANDLES; i++) {
texHandle[i] = NULL;
sub[i] = NULL;
}
int nmaps = 0;
for (i = 0; i < subTex.Count(); i++) {
if (mapOn[i]) {
if (subTex[i]) {
sub[nmaps] = subTex[i];
useSubForTex[nmaps] = i;
if (++nmaps >= nsupport) {
break;
}
}
}
}
pIHWMat->SetNumTexStages(nmaps);
for (i = 0; i < nmaps; i++) {
pIHWMat->SetTexture(i, (DWORD_PTR)NULL);
}
numTexHandlesUsed = nmaps;
texHandleValid.SetInfinite();
if (numTexHandlesUsed == 1) {
texOp = TX_MODULATE;
}
else {
texOp = TX_ALPHABLEND;
}
for (i = 0; i < numTexHandlesUsed; i++) {
// Kludge to pass in the TextureStage number
mtl->texture[0].useTex = i;
cb.GetGfxTexInfoFromTexmap(t, mtl->texture[0], sub[i]);
BITMAPINFO *bmi = sub[i]->GetVPDisplayDIB(t, cb, valid, FALSE, 0, 0);
texHandle[i] = cb.MakeHandle(bmi);
pIHWMat->SetTexture(i, texHandle[i]->GetHandle());
SetHWTexOps(pIHWMat, i, texOp);
}
}
else {
if (texHandleValid.InInterval(t)) {
mtl->texture.SetCount(numTexHandlesUsed);
int nt = numTexHandlesUsed;
for (int i=0; i<nt; i++) {
if (texHandle[i]) {
mtl->texture[i].textHandle = texHandle[i]->GetHandle();
cb.GetGfxTexInfoFromTexmap(t, mtl->texture[i], subTex[useSubForTex[i]] );
SetTexOps(&mtl->texture[i],numTexHandlesUsed==1?TX_MODULATE:TX_ALPHABLEND);
}
}
return;
}
else {
DiscardTexHandles();
}
int forceW = 0;
int forceH = 0;
int nsupport = cb.NumberTexturesSupported();
nsupport = (nsupport > MAXTEXHANDLES) ? MAXTEXHANDLES : nsupport;
numTexHandlesUsed = 0;
for (int i=0; i<MAXTEXHANDLES; i++) {
texHandle[i] = NULL;
sub[i]=NULL;
}
int nmaps = 0;
for (i=0; i<subTex.Count(); i++) {
if (mapOn[i]) {
if (subTex[i]) {
sub[nmaps] = subTex[i];
useSubForTex[nmaps] = i;
if (++nmaps>=nsupport)
break;
}
}
}
mtl->texture.SetCount(nmaps);
for (i=0; i<nmaps; i++) {
mtl->texture[i].textHandle = NULL;
}
numTexHandlesUsed = nmaps;
texHandleValid.SetInfinite();
for (i=0; i<nmaps; i++) {
cb.GetGfxTexInfoFromTexmap(t, mtl->texture[i], sub[i] );
BITMAPINFO *bmi = sub[i]->GetVPDisplayDIB(t,cb,valid,FALSE,0,0);
texHandle[i] = cb.MakeHandle(bmi);
mtl->texture[i].textHandle = texHandle[i]->GetHandle();
SetTexOps(&mtl->texture[i],nmaps==1?TX_MODULATE:TX_ALPHABLEND);
}
mtl->texture.SetCount(nmaps);
}
}
void TriPatchObject::UpdatePatchMesh(TimeValue t) {
if ( ivalid.InInterval(t) ) {
return;
}
BuildPatch(t,patch);
}
// Output float keys if this is a known float controller that
// supports key operations. Otherwise we will sample the controller
// once for each frame to get the value.
void AsciiExp::DumpFloatKeys(Control* cont, int indentLevel)
{
if (!cont)
return;
int i;
TSTR indent = GetIndent(indentLevel);
IKeyControl *ikc = NULL;
// If the user wants us to always sample, we will ignore the KeyControlInterface
if (!GetAlwaysSample())
ikc = GetKeyControlInterface(cont);
// TCB float
if (ikc && cont->ClassID() == Class_ID(TCBINTERP_FLOAT_CLASS_ID, 0)) {
_ftprintf(pStream, _T("%s\t\t%s {\n"), indent.data(), ID_CONTROL_FLOAT_TCB);
for (i=0; i<ikc->GetNumKeys(); i++) {
ITCBFloatKey key;
ikc->GetKey(i, &key);
_ftprintf(pStream, _T("%s\t\t\t%s %d\t%s"),
indent.data(),
ID_TCB_FLOAT_KEY,
key.time,
Format(key.val));
_ftprintf(pStream, _T("\t%s\t%s\t%s\t%s\t%s\n"), Format(key.tens), Format(key.cont), Format(key.bias), Format(key.easeIn), Format(key.easeOut));
}
_ftprintf(pStream, _T("%s\t\t}\n"), indent.data());
}
// Bezier float
else if (ikc && cont->ClassID() == Class_ID(HYBRIDINTERP_FLOAT_CLASS_ID, 0)) {
_ftprintf(pStream, _T("%s\t\t%s {\n"), indent.data(), ID_CONTROL_FLOAT_BEZIER);
for (i=0; i<ikc->GetNumKeys(); i++) {
IBezFloatKey key;
ikc->GetKey(i, &key);
_ftprintf(pStream, _T("%s\t\t\t%s %d\t%s"),
indent.data(),
ID_BEZIER_FLOAT_KEY,
key.time,
Format(key.val));
_ftprintf(pStream, _T("\t%s\t%s\t%d\n"), Format(key.intan), Format(key.outtan), key.flags);
}
_ftprintf(pStream, _T("%s\t\t}\n"), indent.data());
}
else if (ikc && cont->ClassID() == Class_ID(LININTERP_FLOAT_CLASS_ID, 0)) {
_ftprintf(pStream, _T("%s\t\t%s {\n"), indent.data(), ID_CONTROL_FLOAT_LINEAR);
for (i=0; i<ikc->GetNumKeys(); i++) {
ILinFloatKey key;
ikc->GetKey(i, &key);
_ftprintf(pStream, _T("%s\t\t\t%s %d\t%s\n"),
indent.data(),
ID_FLOAT_KEY,
key.time,
Format(key.val));
}
_ftprintf(pStream, _T("%s\t\t}\n"), indent.data());
}
else {
// Unknown controller, no key interface or sample on demand -
// This might be a procedural controller or something else we
// don't know about. The last resort is to get the value from the
// controller at every n frames.
TSTR name;
cont->GetClassName(name);
TSTR className = FixupName(name);
Interface14 *iface = GetCOREInterface14();
UINT codepage = iface-> DefaultTextSaveCodePage(true);
const char* className_locale = className.ToCP(codepage);
_ftprintf(pStream, _T("%s\t\t%s \"%hs\" {\n"), indent.data(), ID_CONTROL_FLOAT_SAMPLE,
className_locale);
// If it is animated at all...
if (cont->IsAnimated()) {
// Get the range of the controller animation
Interval range;
// Get range of full animation
Interval animRange = ip->GetAnimRange();
TimeValue t = cont->GetTimeRange(TIMERANGE_ALL).Start();
float value;
// While we are inside the animation...
while (animRange.InInterval(t)) {
// Sample the controller
range = FOREVER;
cont->GetValue(t, &value, range);
// Set time to start of controller validity interval
t = range.Start();
// Output the sample
_ftprintf(pStream, _T("%s\t\t\t%s %d\t%s\n"),
indent.data(),
ID_FLOAT_KEY,
t,
Format(value));
// If the end of the controller validity is beyond the
// range of the animation
if (range.End() > cont->GetTimeRange(TIMERANGE_ALL).End()) {
break;
}
else {
t = (range.End()/GetTicksPerFrame()+GetKeyFrameStep()) * GetTicksPerFrame();
}
}
}
_ftprintf(pStream, _T("%s\t\t}\n"), indent.data());
}
}
void CellTex::Update(TimeValue t, Interval& valid)
{
EnterCriticalSection(&csect);
if (!ivalid.InInterval(t)) {
ivalid = FOREVER;
xyzGen->Update(t,ivalid);
texout->Update(t,ivalid);
/*
pblock->GetValue(PB_CELLCOL,t,cellCol,ivalid);
pblock->GetValue(PB_DIVCOL1,t,divCol1,ivalid);
pblock->GetValue(PB_DIVCOL2,t,divCol2,ivalid);
pblock->GetValue(PB_VAR,t,var,ivalid);
pblock->GetValue(PB_SIZE,t,size,ivalid);
pblock->GetValue(PB_SPREAD,t,spread,ivalid);
pblock->GetValue(PB_LOW,t,low,ivalid);
pblock->GetValue(PB_MID,t,mid,ivalid);
pblock->GetValue(PB_HIGH,t,high,ivalid);
pblock->GetValue(PB_TYPE,t,type,ivalid);
pblock->GetValue(PB_FRACT,t,fract,ivalid);
pblock->GetValue(PB_ITER,t,iterations,ivalid);
pblock->GetValue(PB_USECELLMAP,t,useCellMap,ivalid);
pblock->GetValue(PB_USEDIV1MAP,t,useDiv1Map,ivalid);
pblock->GetValue(PB_USEDIV2MAP,t,useDiv2Map,ivalid);
pblock->GetValue(PB_ROUGH,t,rough,ivalid);
pblock->GetValue(PB_SMOOTH,t,smooth,ivalid);
pblock->GetValue(PB_ADAPT,t,adapt,ivalid);
*/
pblock->GetValue(cellular_celcolor,t,cellCol,ivalid);
pblock->GetValue(cellular_divcol1,t,divCol1,ivalid);
pblock->GetValue(cellular_divcol2,t,divCol2,ivalid);
pblock->GetValue(cellular_variation,t,var,ivalid);
pblock->GetValue(cellular_size,t,size,ivalid);
pblock->GetValue(cellular_spread,t,spread,ivalid);
pblock->GetValue(cellular_lowthresh,t,low,ivalid);
pblock->GetValue(cellular_midthresh,t,mid,ivalid);
pblock->GetValue(cellular_highthresh,t,high,ivalid);
pblock->GetValue(cellular_type,t,type,ivalid);
pblock->GetValue(cellular_fractal,t,fract,ivalid);
pblock->GetValue(cellular_iteration,t,iterations,ivalid);
pblock->GetValue(cellular_map1_on,t,useCellMap,ivalid);
pblock->GetValue(cellular_map2_on,t,useDiv1Map,ivalid);
pblock->GetValue(cellular_map3_on,t,useDiv2Map,ivalid);
pblock->GetValue(cellular_rough,t,rough,ivalid);
pblock->GetValue(cellular_smooth,t,smooth,ivalid);
pblock->GetValue(cellular_adaptive,t,adapt,ivalid);
smooth *= 0.7f;
rough = 2.0f-rough;
highMinuslow = high-low;
midMinuslow = mid - low;
highMinusmid = high - mid;
if (type) {
spread = spread/2.0f;
}
var /= 50.0f;
varOff = 1.0f-var * 0.5f;
for (int i=0; i<NSUBTEX; i++) {
if (subTex[i])
subTex[i]->Update(t,ivalid);
}
}
valid &= ivalid;
LeaveCriticalSection(&csect);
}
Point3 WindField::Force(
TimeValue t,const Point3 &pos, const Point3 &vel,int index)
{
if (!obj)
return Point3(0.0f, 0.0f, 0.0f);
float strength, decay, turb;
obj->pblock2->GetValue(PB_DECAY,t,decay,fValid);
obj->pblock2->GetValue(PB_TURBULENCE,t,turb,FOREVER);
if (decay <0.0f) decay = 0.0f;
if (!fValid.InInterval(t) || type==FORCE_SPHERICAL || decay!=0.0f) {
fValid = FOREVER;
if (!tmValid.InInterval(t)) {
tmValid = FOREVER;
tm = node->GetObjectTM(t,&tmValid);
}
fValid &= tmValid;
obj->pblock2->GetValue(PB_STRENGTH,t,strength,fValid);
if (type==FORCE_PLANAR) {
force = Normalize(tm.GetRow(2));
if (decay!=0.0f) {
float dist = (float)fabs(DotProd(force,pos-tm.GetTrans()));
strength *= (float)exp(-decay*dist);
}
force *= strength * 0.0001f * forceScaleFactor;
} else {
float dist;
force = pos-tm.GetTrans();
dist = Length(force);
if (dist!=0.0f) force /= dist;
if (decay!=0.0f) {
strength *= (float)exp(-decay*dist);
}
force *= strength * 0.0001f * forceScaleFactor;
}
}
if (turb!=0.0f) {
float freq, scale;
Point3 tf, pt = pos-tm.GetTrans(), p;
obj->pblock2->GetValue(PB_FREQUENCY,t,freq,FOREVER);
obj->pblock2->GetValue(PB_SCALE,t,scale,FOREVER);
freq *= 0.01f;
turb *= 0.0001f * forceScaleFactor;
p = pt;
p.x = freq * float(t);
tf.x = RTurbulence(p,scale);
p = pt;
p.y = freq * float(t);
tf.y = RTurbulence(p,scale);
p = pt;
p.z = freq * float(t);
tf.z = RTurbulence(p,scale);
return force + (turb*tf);
} else {
return force;
}
}
