data_STEMDIRECTION View::GetTupletCoordinates(Tuplet *tuplet, Layer *layer, Point *start, Point *end, Point *center)
{
assert(tuplet);
assert(layer);
assert(start);
assert(end);
assert(center);
Point first, last;
int x, y;
data_STEMDIRECTION direction = STEMDIRECTION_up;
ListOfObjects *tupletChildren = tuplet->GetList(tuplet);
LayerElement *firstElement = dynamic_cast<LayerElement *>(tupletChildren->front());
LayerElement *lastElement = dynamic_cast<LayerElement *>(tupletChildren->back());
// AllNotesBeamed tries to figure out if all the notes are in the same beam
if (OneBeamInTuplet(tuplet)) {
// yes they are in a beam
x = firstElement->GetDrawingX()
+ (lastElement->GetDrawingX() - firstElement->GetDrawingX() + lastElement->m_selfBB_x2) / 2;
// align the center point at the exact center of the first an last stem
// TUPLET_OFFSET is summed so it does not collide with the stem
Note *firstNote = dynamic_cast<Note *>(tuplet->FindChildByType(NOTE));
Note *lastNote = dynamic_cast<Note *>(tuplet->FindChildByType(NOTE, UNLIMITED_DEPTH, BACKWARD));
y = firstElement->GetDrawingY();
if (firstNote && lastNote) {
if (firstNote->GetDrawingStemDir() == STEMDIRECTION_up)
y = lastNote->GetDrawingStemEnd().y
+ (firstNote->GetDrawingStemEnd().y - lastNote->GetDrawingStemEnd().y) / 2 + TUPLET_OFFSET;
else
y = lastNote->GetDrawingStemEnd().y
+ (firstNote->GetDrawingStemEnd().y - lastNote->GetDrawingStemEnd().y) / 2 - TUPLET_OFFSET;
}
// Copy the generated coordinates
center->x = x;
center->y = y;
direction = firstNote->GetDrawingStemDir(); // stem direction is the same for all notes
}
else {
// There are unbeamed notes of two different beams
// treat all the notes as unbeamed
int ups = 0, downs = 0; // quantity of up- and down-stems
// In this case use the center of the notehead to calculate the exact center
// as it looks better
x = firstElement->GetDrawingX()
+ (lastElement->GetDrawingX() - firstElement->GetDrawingX() + lastElement->m_selfBB_x2) / 2;
// Return the start and end position for the brackes
// starting from the first edge and last of the BBoxes
start->x = firstElement->m_selfBB_x1 + firstElement->GetDrawingX();
end->x = lastElement->m_selfBB_x2 + lastElement->GetDrawingX();
// The first step is to calculate all the stem directions
// cycle into the elements and count the up and down dirs
ListOfObjects::iterator iter = tupletChildren->begin();
while (iter != tupletChildren->end()) {
if ((*iter)->Is() == NOTE) {
Note *currentNote = dynamic_cast<Note *>(*iter);
assert(currentNote);
if (currentNote->GetDrawingStemDir() == STEMDIRECTION_up)
ups++;
else
downs++;
}
++iter;
}
// true means up
direction = ups > downs ? STEMDIRECTION_up : STEMDIRECTION_down;
// if ups or downs are 0, it means all the stems go in the same direction
if (ups == 0 || downs == 0) {
Note *firstNote = dynamic_cast<Note *>(tuplet->FindChildByType(NOTE));
Note *lastNote = dynamic_cast<Note *>(tuplet->FindChildByType(NOTE, UNLIMITED_DEPTH, BACKWARD));
// Calculate the average between the first and last stem
// set center, start and end too.
y = firstElement->GetDrawingY();
if (firstNote && lastNote) {
if (direction == STEMDIRECTION_up) { // up
y = lastNote->GetDrawingStemEnd().y
+ (firstNote->GetDrawingStemEnd().y - lastNote->GetDrawingStemEnd().y) / 2 + TUPLET_OFFSET;
start->y = firstNote->GetDrawingStemEnd().y + TUPLET_OFFSET;
end->y = lastNote->GetDrawingStemEnd().y + TUPLET_OFFSET;
}
else {
y = lastNote->GetDrawingStemEnd().y
+ (firstNote->GetDrawingStemEnd().y - lastNote->GetDrawingStemEnd().y) / 2 - TUPLET_OFFSET;
start->y = firstNote->GetDrawingStemEnd().y - TUPLET_OFFSET;
end->y = lastNote->GetDrawingStemEnd().y - TUPLET_OFFSET;
}
}
// Now we cycle again in all the intermediate notes (i.e. we start from the second note
// and stop at last -1)
// We will see if the position of the note is more (or less for down stems) of the calculated
// average. In this case we offset down or up all the points
iter = tupletChildren->begin();
while (iter != tupletChildren->end()) {
if ((*iter)->Is() == NOTE) {
Note *currentNote = dynamic_cast<Note *>(*iter);
assert(currentNote);
if (direction == STEMDIRECTION_up) {
// The note is more than the avg, adjust to y the difference
// from this note to the avg
if (currentNote->GetDrawingStemEnd().y + TUPLET_OFFSET > y) {
int offset = y - (currentNote->GetDrawingStemEnd().y + TUPLET_OFFSET);
y -= offset;
end->y -= offset;
start->y -= offset;
}
}
else {
if (currentNote->GetDrawingStemEnd().y - TUPLET_OFFSET < y) {
int offset = y - (currentNote->GetDrawingStemEnd().y - TUPLET_OFFSET);
y -= offset;
end->y -= offset;
start->y -= offset;
}
}
}
++iter;
}
}
else {
// two-directional beams
// this case is similar to the above, but the bracket is only horizontal
// y is 0 because the final y pos is above the tallest stem
y = 0;
// Find the tallest stem and set y to it (with the offset distance)
iter = tupletChildren->begin();
while (iter != tupletChildren->end()) {
if ((*iter)->Is() == NOTE) {
Note *currentNote = dynamic_cast<Note *>(*iter);
assert(currentNote);
if (currentNote->GetDrawingStemDir() == direction) {
if (direction == STEMDIRECTION_up) {
if (y == 0 || currentNote->GetDrawingStemEnd().y + TUPLET_OFFSET >= y)
y = currentNote->GetDrawingStemEnd().y + TUPLET_OFFSET;
}
else {
if (y == 0 || currentNote->GetDrawingStemEnd().y - TUPLET_OFFSET <= y)
y = currentNote->GetDrawingStemEnd().y - TUPLET_OFFSET;
}
}
else {
// do none for now
// but if a notehead with a reversed stem is taller that the last
// calculated y, we need to offset
}
}
++iter;
}
// end and start are on the same line (and so il center when set later)
end->y = start->y = y;
}
}
center->x = x;
center->y = y;
return direction;
}
void View::DrawSlurInitial(FloatingCurvePositioner *curve, Slur *slur, int x1, int x2, Staff *staff, char spanningType)
{
Beam *parentBeam = NULL;
Chord *startParentChord = NULL;
Chord *endParentChord = NULL;
Note *startNote = NULL;
Note *endNote = NULL;
Chord *startChord = NULL;
Chord *endChord = NULL;
curvature_CURVEDIR drawingCurveDir = curvature_CURVEDIR_above;
data_STEMDIRECTION startStemDir = STEMDIRECTION_NONE;
data_STEMDIRECTION endStemDir = STEMDIRECTION_NONE;
data_STEMDIRECTION stemDir = STEMDIRECTION_NONE;
bool isGraceToNoteSlur = false;
int y1 = staff->GetDrawingY();
int y2 = staff->GetDrawingY();
/************** parent layers **************/
LayerElement *start = dynamic_cast<LayerElement *>(slur->GetStart());
LayerElement *end = dynamic_cast<LayerElement *>(slur->GetEnd());
if (!start || !end) {
// no start and end, obviously nothing to do...
return;
}
if (start->Is(TIMESTAMP_ATTR) && end->Is(TIMESTAMP_ATTR)) {
// for now ignore slur using 2 tstamps
return;
}
if (start->Is(NOTE)) {
startNote = dynamic_cast<Note *>(start);
assert(startNote);
startParentChord = startNote->IsChordTone();
startStemDir = startNote->GetDrawingStemDir();
}
else if (start->Is(CHORD)) {
startChord = dynamic_cast<Chord *>(start);
assert(startChord);
startStemDir = startChord->GetDrawingStemDir();
}
if (end->Is(NOTE)) {
endNote = dynamic_cast<Note *>(end);
assert(endNote);
endParentChord = endNote->IsChordTone();
endStemDir = endNote->GetDrawingStemDir();
}
else if (end->Is(CHORD)) {
endChord = dynamic_cast<Chord *>(end);
assert(endChord);
endStemDir = endChord->GetDrawingStemDir();
}
if (startNote && endNote && startNote->IsGraceNote() && !endNote->IsGraceNote()) {
isGraceToNoteSlur = true;
}
Layer *layer = NULL;
LayerElement *layerElement = NULL;
// For now, with timestamps, get the first layer. We should eventually look at the @layerident (not implemented)
if (!start->Is(TIMESTAMP_ATTR)) {
layer = dynamic_cast<Layer *>(start->GetFirstParent(LAYER));
layerElement = start;
}
else {
layer = dynamic_cast<Layer *>(end->GetFirstParent(LAYER));
layerElement = end;
}
assert(layer);
if (!start->Is(TIMESTAMP_ATTR) && !end->Is(TIMESTAMP_ATTR) && (spanningType == SPANNING_START_END)) {
System *system = dynamic_cast<System *>(staff->GetFirstParent(SYSTEM));
assert(system);
// If we have a start to end situation, then store the curvedir in the slur for mixed drawing stem dir
// situations
if (system->HasMixedDrawingStemDir(start, end)) {
slur->SetDrawingCurvedir(curvature_CURVEDIR_above);
}
}
/************** calculate the radius for adjusting the x position **************/
int startRadius = 0;
if (!start->Is(TIMESTAMP_ATTR)) {
startRadius = start->GetDrawingRadius(m_doc);
}
int endRadius = 0;
if (!end->Is(TIMESTAMP_ATTR)) {
endRadius = end->GetDrawingRadius(m_doc);
}
/************** note stem dir **************/
if (spanningType == SPANNING_START_END) {
stemDir = startStemDir;
}
// This is the case when the tie is split over two system of two pages.
// In this case, we are now drawing its beginning to the end of the measure (i.e., the last aligner)
else if (spanningType == SPANNING_START) {
stemDir = startStemDir;
}
// Now this is the case when the tie is split but we are drawing the end of it
else if (spanningType == SPANNING_END) {
stemDir = endStemDir;
}
// Finally, slur accross an entire system; use the staff position and up (see below)
else {
stemDir = STEMDIRECTION_down;
}
/************** direction **************/
data_STEMDIRECTION layerStemDir;
// first should be the tie @curvedir
if (slur->HasCurvedir()) {
drawingCurveDir
= (slur->GetCurvedir() == curvature_CURVEDIR_above) ? curvature_CURVEDIR_above : curvature_CURVEDIR_below;
}
// grace notes - always below unless we have a drawing stem direction on the layer
else if (isGraceToNoteSlur && (layer->GetDrawingStemDir(layerElement) == STEMDIRECTION_NONE)) {
drawingCurveDir = curvature_CURVEDIR_below;
}
// the normal case
else if (slur->HasDrawingCurvedir()) {
drawingCurveDir = slur->GetDrawingCurvedir();
}
// then layer direction trumps note direction
else if (layer && ((layerStemDir = layer->GetDrawingStemDir(layerElement)) != STEMDIRECTION_NONE)) {
drawingCurveDir = (layerStemDir == STEMDIRECTION_up) ? curvature_CURVEDIR_above : curvature_CURVEDIR_below;
}
// look if in a chord
else if (startParentChord) {
if (startParentChord->PositionInChord(startNote) < 0) {
drawingCurveDir = curvature_CURVEDIR_below;
}
else if (startParentChord->PositionInChord(startNote) > 0) {
drawingCurveDir = curvature_CURVEDIR_above;
}
// away from the stem if odd number (center note)
else {
drawingCurveDir = (stemDir != STEMDIRECTION_up) ? curvature_CURVEDIR_above : curvature_CURVEDIR_below;
}
}
else if (stemDir == STEMDIRECTION_up) {
drawingCurveDir = curvature_CURVEDIR_below;
}
else if (stemDir == STEMDIRECTION_NONE) {
// no information from the note stem directions, look at the position in the notes
int center = staff->GetDrawingY() - m_doc->GetDrawingDoubleUnit(staff->m_drawingStaffSize) * 2;
drawingCurveDir = (start->GetDrawingY() > center) ? curvature_CURVEDIR_above : curvature_CURVEDIR_below;
}
/************** adjusting y position **************/
bool isShortSlur = false;
if (x2 - x1 < 1 * m_doc->GetDrawingDoubleUnit(staff->m_drawingStaffSize)) isShortSlur = true;
int yChordMax, yChordMin;
if ((spanningType == SPANNING_START_END) || (spanningType == SPANNING_START)) {
// first get the min max of the chord (if any)
if (startParentChord) {
startParentChord->GetYExtremes(yChordMax, yChordMin);
}
else if (startChord) {
startChord->GetYExtremes(yChordMax, yChordMin);
}
// slur is up
if (drawingCurveDir == curvature_CURVEDIR_above) {
// P(^)
if (startStemDir == STEMDIRECTION_down) y1 = start->GetDrawingTop(m_doc, staff->m_drawingStaffSize);
// d(^)d
else if (isShortSlur) {
y1 = start->GetDrawingTop(m_doc, staff->m_drawingStaffSize);
}
// same but in beam - adjust the x too
else if ((parentBeam = start->IsInBeam()) && !parentBeam->IsLastInBeam(start)) {
y1 = start->GetDrawingTop(m_doc, staff->m_drawingStaffSize);
x1 += startRadius - m_doc->GetDrawingStemWidth(staff->m_drawingStaffSize);
}
// d(^)
else {
// put it on the side, move it left, but not if we have a @stamp
if (!start->Is(TIMESTAMP_ATTR)) x1 += m_doc->GetDrawingUnit(staff->m_drawingStaffSize) * 4 / 2;
if (startChord || startParentChord)
y1 = yChordMin + m_doc->GetDrawingUnit(staff->m_drawingStaffSize) * 3;
else
y1 = start->GetDrawingY() + m_doc->GetDrawingUnit(staff->m_drawingStaffSize) * 3;
}
}
// slur is down
else {
// d(_)
if (startStemDir == STEMDIRECTION_up) y1 = start->GetDrawingBottom(m_doc, staff->m_drawingStaffSize);
// P(_)P
else if (isShortSlur) {
y1 = start->GetDrawingBottom(m_doc, staff->m_drawingStaffSize);
}
// same but in beam
else if ((parentBeam = start->IsInBeam()) && !parentBeam->IsLastInBeam(start)) {
y1 = start->GetDrawingBottom(m_doc, staff->m_drawingStaffSize);
x1 -= startRadius - m_doc->GetDrawingStemWidth(staff->m_drawingStaffSize);
}
// P(_)
else {
// put it on the side, but no need to move it left
if (startChord || startParentChord)
y1 = yChordMin - m_doc->GetDrawingUnit(staff->m_drawingStaffSize) * 3;
else
y1 = start->GetDrawingY() - m_doc->GetDrawingUnit(staff->m_drawingStaffSize) * 3;
}
}
}
if ((spanningType == SPANNING_START_END) || (spanningType == SPANNING_END)) {
// get the min max of the chord if any
if (endParentChord) {
endParentChord->GetYExtremes(yChordMax, yChordMin);
}
else if (endChord) {
endChord->GetYExtremes(yChordMax, yChordMin);
}
// get the stem direction of the end
// slur is up
if (drawingCurveDir == curvature_CURVEDIR_above) {
// (^)P
if (endStemDir == STEMDIRECTION_down) y2 = end->GetDrawingTop(m_doc, staff->m_drawingStaffSize);
// d(^)d
else if (isShortSlur) {
y2 = end->GetDrawingTop(m_doc, staff->m_drawingStaffSize);
}
// same but in beam - adjust the x too
else if ((parentBeam = end->IsInBeam()) && !parentBeam->IsFirstInBeam(end)) {
y2 = end->GetDrawingTop(m_doc, staff->m_drawingStaffSize);
x2 += endRadius - m_doc->GetDrawingStemWidth(staff->m_drawingStaffSize);
}
// (^)d
else {
// put it on the side, no need to move it right
if (endChord || endParentChord)
y2 = yChordMin + m_doc->GetDrawingUnit(staff->m_drawingStaffSize) * 3;
else
y2 = end->GetDrawingY() + m_doc->GetDrawingUnit(staff->m_drawingStaffSize) * 3;
}
}
else {
if (isGraceToNoteSlur) {
if (endNote) {
y2 = endNote->GetDrawingY();
x2 -= m_doc->GetDrawingUnit(staff->m_drawingStaffSize) * 2;
isShortSlur = true;
}
else {
y2 = y1;
}
}
// (_)d
else if (endStemDir == STEMDIRECTION_up)
y2 = end->GetDrawingBottom(m_doc, staff->m_drawingStaffSize);
// P(_)P
else if (isShortSlur) {
y2 = end->GetDrawingBottom(m_doc, staff->m_drawingStaffSize);
}
// same but in beam
else if ((parentBeam = end->IsInBeam()) && !parentBeam->IsFirstInBeam(end)) {
y2 = end->GetDrawingBottom(m_doc, staff->m_drawingStaffSize);
//
x2 -= endRadius - m_doc->GetDrawingStemWidth(staff->m_drawingStaffSize);
}
// (_)P
else {
// put it on the side, move it right, but not if we have a @stamp2
if (!end->Is(TIMESTAMP_ATTR)) x2 -= m_doc->GetDrawingUnit(staff->m_drawingStaffSize) * 2;
if (endChord || endParentChord)
y2 = yChordMin - m_doc->GetDrawingUnit(staff->m_drawingStaffSize) * 3;
else
y2 = end->GetDrawingY() - m_doc->GetDrawingUnit(staff->m_drawingStaffSize) * 3;
}
}
}
// Positions not attached to a note
if (spanningType == SPANNING_START) {
if (drawingCurveDir == curvature_CURVEDIR_above)
y2 = std::max(staff->GetDrawingY(), y1);
else
y2 = std::min(staff->GetDrawingY() - m_doc->GetDrawingStaffSize(staff->m_drawingStaffSize), y1);
}
if (end->Is(TIMESTAMP_ATTR)) {
if (drawingCurveDir == curvature_CURVEDIR_above)
y2 = std::max(staff->GetDrawingY(), y1);
else
y2 = std::min(staff->GetDrawingY() - m_doc->GetDrawingStaffSize(staff->m_drawingStaffSize), y1);
}
if (spanningType == SPANNING_END) {
if (drawingCurveDir == curvature_CURVEDIR_above)
y1 = std::max(staff->GetDrawingY(), y2);
else
y1 = std::min(staff->GetDrawingY() - m_doc->GetDrawingStaffSize(staff->m_drawingStaffSize), y2);
}
if (start->Is(TIMESTAMP_ATTR)) {
if (drawingCurveDir == curvature_CURVEDIR_above)
y1 = std::max(staff->GetDrawingY(), y2);
else
y1 = std::min(staff->GetDrawingY() - m_doc->GetDrawingStaffSize(staff->m_drawingStaffSize), y2);
}
// slur accross an entire system; use the staff position
else if (spanningType == SPANNING_MIDDLE) {
// To be adjusted
if (drawingCurveDir == curvature_CURVEDIR_above)
y1 = staff->GetDrawingY();
else
y1 = staff->GetDrawingY() - m_doc->GetDrawingStaffSize(staff->m_drawingStaffSize);
y2 = y1;
}
/************** y position **************/
if (drawingCurveDir == curvature_CURVEDIR_above) {
y1 += 1 * m_doc->GetDrawingUnit(staff->m_drawingStaffSize);
y2 += 1 * m_doc->GetDrawingUnit(staff->m_drawingStaffSize);
}
else {
y1 -= 1 * m_doc->GetDrawingUnit(staff->m_drawingStaffSize);
y2 -= 1 * m_doc->GetDrawingUnit(staff->m_drawingStaffSize);
}
Point points[4];
points[0] = Point(x1, y1);
points[3] = Point(x2, y2);
float angle = CalcInitialSlur(curve, slur, staff, layer->GetN(), drawingCurveDir, points);
int thickness = m_doc->GetDrawingUnit(staff->m_drawingStaffSize) * m_options->m_slurThickness.GetValue();
curve->UpdateCurveParams(points, angle, thickness, drawingCurveDir);
/************** articulation **************/
// First get all artic children
ClassIdComparison matchType(ARTIC);
ArrayOfObjects artics;
ArrayOfObjects::iterator articIter;
// the normal case or start
if ((spanningType == SPANNING_START_END) || (spanningType == SPANNING_START)) {
start->FindAllChildByComparison(&artics, &matchType);
// Then the @n of each first staffDef
for (articIter = artics.begin(); articIter != artics.end(); ++articIter) {
Artic *artic = dynamic_cast<Artic *>(*articIter);
assert(artic);
ArticPart *outsidePart = artic->GetOutsidePart();
if (outsidePart) {
if ((outsidePart->GetPlace().GetBasic() == STAFFREL_basic_above)
&& (drawingCurveDir == curvature_CURVEDIR_above)) {
outsidePart->AddSlurPositioner(curve, true);
}
else if ((outsidePart->GetPlace().GetBasic() == STAFFREL_basic_below)
&& (drawingCurveDir == curvature_CURVEDIR_below)) {
outsidePart->AddSlurPositioner(curve, true);
}
}
}
}
// normal case or end
if ((spanningType == SPANNING_START_END) || (spanningType == SPANNING_END)) {
end->FindAllChildByComparison(&artics, &matchType);
// Then the @n of each first staffDef
for (articIter = artics.begin(); articIter != artics.end(); ++articIter) {
Artic *artic = dynamic_cast<Artic *>(*articIter);
assert(artic);
ArticPart *outsidePart = artic->GetOutsidePart();
if (outsidePart) {
if ((outsidePart->GetPlace().GetBasic() == STAFFREL_basic_above)
&& (drawingCurveDir == curvature_CURVEDIR_above)) {
outsidePart->AddSlurPositioner(curve, false);
}
else if ((outsidePart->GetPlace().GetBasic() == STAFFREL_basic_below)
&& (drawingCurveDir == curvature_CURVEDIR_below)) {
outsidePart->AddSlurPositioner(curve, false);
}
}
}
}
return;
}