void
UserValue::computeIntervals(MachineRegisterInfo &MRI,
const TargetRegisterInfo &TRI,
LiveIntervals &LIS,
MachineDominatorTree &MDT,
UserValueScopes &UVS) {
SmallVector<std::pair<SlotIndex, unsigned>, 16> Defs;
// Collect all defs to be extended (Skipping undefs).
for (LocMap::const_iterator I = locInts.begin(); I.valid(); ++I)
if (I.value() != ~0u)
Defs.push_back(std::make_pair(I.start(), I.value()));
// Extend all defs, and possibly add new ones along the way.
for (unsigned i = 0; i != Defs.size(); ++i) {
SlotIndex Idx = Defs[i].first;
unsigned LocNo = Defs[i].second;
const MachineOperand &Loc = locations[LocNo];
if (!Loc.isReg()) {
extendDef(Idx, LocNo, 0, 0, 0, LIS, MDT, UVS);
continue;
}
// Register locations are constrained to where the register value is live.
if (TargetRegisterInfo::isVirtualRegister(Loc.getReg())) {
LiveInterval *LI = 0;
const VNInfo *VNI = 0;
if (LIS.hasInterval(Loc.getReg())) {
LI = &LIS.getInterval(Loc.getReg());
VNI = LI->getVNInfoAt(Idx);
}
SmallVector<SlotIndex, 16> Kills;
extendDef(Idx, LocNo, LI, VNI, &Kills, LIS, MDT, UVS);
if (LI)
addDefsFromCopies(LI, LocNo, Kills, Defs, MRI, LIS);
continue;
}
// For physregs, use the live range of the first regunit as a guide.
unsigned Unit = *MCRegUnitIterator(Loc.getReg(), &TRI);
LiveRange *LR = &LIS.getRegUnit(Unit);
const VNInfo *VNI = LR->getVNInfoAt(Idx);
// Don't track copies from physregs, it is too expensive.
extendDef(Idx, LocNo, LR, VNI, 0, LIS, MDT, UVS);
}
// Finally, erase all the undefs.
for (LocMap::iterator I = locInts.begin(); I.valid();)
if (I.value() == ~0u)
I.erase();
else
++I;
}
void UserValue::computeIntervals(MachineRegisterInfo &MRI,
const TargetRegisterInfo &TRI,
LiveIntervals &LIS, LexicalScopes &LS) {
SmallVector<std::pair<SlotIndex, unsigned>, 16> Defs;
// Collect all defs to be extended (Skipping undefs).
for (LocMap::const_iterator I = locInts.begin(); I.valid(); ++I)
if (I.value() != UndefLocNo)
Defs.push_back(std::make_pair(I.start(), I.value()));
// Extend all defs, and possibly add new ones along the way.
for (unsigned i = 0; i != Defs.size(); ++i) {
SlotIndex Idx = Defs[i].first;
unsigned LocNo = Defs[i].second;
const MachineOperand &Loc = locations[LocNo];
if (!Loc.isReg()) {
extendDef(Idx, LocNo, nullptr, nullptr, nullptr, LIS);
continue;
}
// Register locations are constrained to where the register value is live.
if (TargetRegisterInfo::isVirtualRegister(Loc.getReg())) {
LiveInterval *LI = nullptr;
const VNInfo *VNI = nullptr;
if (LIS.hasInterval(Loc.getReg())) {
LI = &LIS.getInterval(Loc.getReg());
VNI = LI->getVNInfoAt(Idx);
}
SmallVector<SlotIndex, 16> Kills;
extendDef(Idx, LocNo, LI, VNI, &Kills, LIS);
if (LI)
addDefsFromCopies(LI, LocNo, Kills, Defs, MRI, LIS);
continue;
}
// For physregs, use the live range of the first regunit as a guide.
unsigned Unit = *MCRegUnitIterator(Loc.getReg(), &TRI);
LiveRange *LR = &LIS.getRegUnit(Unit);
const VNInfo *VNI = LR->getVNInfoAt(Idx);
// Don't track copies from physregs, it is too expensive.
extendDef(Idx, LocNo, LR, VNI, nullptr, LIS);
}
// Erase all the undefs.
for (LocMap::iterator I = locInts.begin(); I.valid();)
if (I.value() == UndefLocNo)
I.erase();
else
++I;
// The computed intervals may extend beyond the range of the debug
// location's lexical scope. In this case, splitting of an interval
// can result in an interval outside of the scope being created,
// causing extra unnecessary DBG_VALUEs to be emitted. To prevent
// this, trim the intervals to the lexical scope.
LexicalScope *Scope = LS.findLexicalScope(dl);
if (!Scope)
return;
SlotIndex PrevEnd;
LocMap::iterator I = locInts.begin();
// Iterate over the lexical scope ranges. Each time round the loop
// we check the intervals for overlap with the end of the previous
// range and the start of the next. The first range is handled as
// a special case where there is no PrevEnd.
for (const InsnRange &Range : Scope->getRanges()) {
SlotIndex RStart = LIS.getInstructionIndex(*Range.first);
SlotIndex REnd = LIS.getInstructionIndex(*Range.second);
// At the start of each iteration I has been advanced so that
// I.stop() >= PrevEnd. Check for overlap.
if (PrevEnd && I.start() < PrevEnd) {
SlotIndex IStop = I.stop();
unsigned LocNo = I.value();
// Stop overlaps previous end - trim the end of the interval to
// the scope range.
I.setStopUnchecked(PrevEnd);
++I;
// If the interval also overlaps the start of the "next" (i.e.
// current) range create a new interval for the remainder (which
// may be further trimmed).
if (RStart < IStop)
I.insert(RStart, IStop, LocNo);
}
// Advance I so that I.stop() >= RStart, and check for overlap.
I.advanceTo(RStart);
if (!I.valid())
return;
if (I.start() < RStart) {
// Interval start overlaps range - trim to the scope range.
I.setStartUnchecked(RStart);
// Remember that this interval was trimmed.
trimmedDefs.insert(RStart);
}
// The end of a lexical scope range is the last instruction in the
// range. To convert to an interval we need the index of the
// instruction after it.
REnd = REnd.getNextIndex();
// Advance I to first interval outside current range.
I.advanceTo(REnd);
if (!I.valid())
return;
PrevEnd = REnd;
}
// Check for overlap with end of final range.
if (PrevEnd && I.start() < PrevEnd)
I.setStopUnchecked(PrevEnd);
}
