void TestDeformer::_initVertMapping_on_one_mesh( MObject &driver_mesh, MArrayDataBuilder &vertMapOutArrayBuilder, const MPointArray& allPts)
{
MStatus status;
// use vertIter to walk through the vertex of a driver mesh
MItMeshVertex vertIter( driver_mesh, &status );
CHECK_MSTATUS(status);
CHECK_MSTATUS(vertIter.reset());
// for each vertex of the driver mesh
while( !vertIter.isDone(&status) )
{
CHECK_MSTATUS(status);
// get vertex position
MPoint driver_pt;
driver_pt = vertIter.position( MSpace::kWorld, &status );
CHECK_MSTATUS(status);
//get the closest driven point
int closest_pt_index = getClosestPt( driver_pt, allPts );//which one is the closest point(in allPts array) to driver_pt
//add the closest driven point
MDataHandle snapDataHnd = vertMapOutArrayBuilder.addElement( closest_pt_index, &status );
CHECK_MSTATUS( status );
snapDataHnd.setInt( vertIter.index() );
snapDataHnd.setClean();
CHECK_MSTATUS(vertIter.next());
}
}
MStatus dynExprField::compute(const MPlug& plug, MDataBlock& block)
//
// Descriptions:
// compute output force.
//
{
MStatus status;
if( !(plug == mOutputForce) )
return( MS::kUnknownParameter );
// get the logical index of the element this plug refers to.
//
int multiIndex = plug.logicalIndex( &status );
McheckErr(status, "ERROR in plug.logicalIndex.\n");
// Get input data handle, use outputArrayValue since we do not
// want to evaluate both inputs, only the one related to the
// requested multiIndex. Evaluating both inputs at once would cause
// a dependency graph loop.
MArrayDataHandle hInputArray = block.outputArrayValue( mInputData, &status );
McheckErr(status,"ERROR in hInputArray = block.outputArrayValue().\n");
status = hInputArray.jumpToElement( multiIndex );
McheckErr(status, "ERROR: hInputArray.jumpToElement failed.\n");
// get children of aInputData.
MDataHandle hCompond = hInputArray.inputValue( &status );
McheckErr(status, "ERROR in hCompond=hInputArray.inputValue\n");
MDataHandle hPosition = hCompond.child( mInputPositions );
MObject dPosition = hPosition.data();
MFnVectorArrayData fnPosition( dPosition );
MVectorArray points = fnPosition.array( &status );
McheckErr(status, "ERROR in fnPosition.array(), not find points.\n");
// Comment out the following since velocity, and mass are
// not needed in this field.
//
// MDataHandle hVelocity = hCompond.child( mInputVelocities );
// MObject dVelocity = hVelocity.data();
// MFnVectorArrayData fnVelocity( dVelocity );
// MVectorArray velocities = fnVelocity.array( &status );
// McheckErr(status, "ERROR in fnVelocity.array(), not find velocities.\n");
//
// MDataHandle hMass = hCompond.child( mInputMass );
// MObject dMass = hMass.data();
// MFnDoubleArrayData fnMass( dMass );
// MDoubleArray masses = fnMass.array( &status );
// McheckErr(status, "ERROR in fnMass.array(), not find masses.\n");
// The attribute mInputPPData contains the attribute in an array form
// parpared by the particleShape if the particleShape has per particle
// attribute fieldName_attrName.
//
// Suppose a field with the name dynExprField1 is connecting to
// particleShape1, and the particleShape1 has per particle float attribute
// dynExprField1_magnitude and vector attribute dynExprField1_direction,
// then hInputPPArray will contains a MdoubleArray with the corresponding
// name "magnitude" and a MvectorArray with the name "direction". This
// is a mechanism to allow the field attributes being driven by dynamic
// expression.
MArrayDataHandle mhInputPPData = block.inputArrayValue( mInputPPData, &status );
McheckErr(status,"ERROR in mhInputPPData = block.inputArrayValue().\n");
status = mhInputPPData.jumpToElement( multiIndex );
McheckErr(status, "ERROR: mhInputPPArray.jumpToElement failed.\n");
MDataHandle hInputPPData = mhInputPPData.inputValue( &status );
McheckErr(status, "ERROR in hInputPPData = mhInputPPData.inputValue\n");
MObject dInputPPData = hInputPPData.data();
MFnArrayAttrsData inputPPArray( dInputPPData );
MDataHandle hOwnerPPData = block.inputValue( mOwnerPPData, &status );
McheckErr(status, "ERROR in hOwnerPPData = block.inputValue\n");
MObject dOwnerPPData = hOwnerPPData.data();
MFnArrayAttrsData ownerPPArray( dOwnerPPData );
const MString magString("magnitude");
MFnArrayAttrsData::Type doubleType(MFnArrayAttrsData::kDoubleArray);
bool arrayExist;
MDoubleArray magnitudeArray;
arrayExist = inputPPArray.checkArrayExist(magString, doubleType, &status);
// McheckErr(status, "ERROR in checkArrayExist(magnitude)\n");
if(arrayExist) {
magnitudeArray = inputPPArray.getDoubleData(magString, &status);
// McheckErr(status, "ERROR in inputPPArray.doubleArray(magnitude)\n");
}
MDoubleArray magnitudeOwnerArray;
arrayExist = ownerPPArray.checkArrayExist(magString, doubleType, &status);
// McheckErr(status, "ERROR in checkArrayExist(magnitude)\n");
if(arrayExist) {
magnitudeOwnerArray = ownerPPArray.getDoubleData(magString, &status);
// McheckErr(status, "ERROR in ownerPPArray.doubleArray(magnitude)\n");
}
const MString dirString("direction");
MFnArrayAttrsData::Type vectorType(MFnArrayAttrsData::kVectorArray);
arrayExist = inputPPArray.checkArrayExist(dirString, vectorType, &status);
MVectorArray directionArray;
// McheckErr(status, "ERROR in checkArrayExist(direction)\n");
if(arrayExist) {
directionArray = inputPPArray.getVectorData(dirString, &status);
// McheckErr(status, "ERROR in inputPPArray.vectorArray(direction)\n");
}
arrayExist = ownerPPArray.checkArrayExist(dirString, vectorType, &status);
MVectorArray directionOwnerArray;
// McheckErr(status, "ERROR in checkArrayExist(direction)\n");
if(arrayExist) {
directionOwnerArray = ownerPPArray.getVectorData(dirString, &status);
// McheckErr(status, "ERROR in ownerPPArray.vectorArray(direction)\n");
}
// Compute the output force.
//
MVectorArray forceArray;
apply( block, points.length(), magnitudeArray, magnitudeOwnerArray,
directionArray, directionOwnerArray, forceArray );
// get output data handle
//
MArrayDataHandle hOutArray = block.outputArrayValue( mOutputForce, &status);
McheckErr(status, "ERROR in hOutArray = block.outputArrayValue.\n");
MArrayDataBuilder bOutArray = hOutArray.builder( &status );
McheckErr(status, "ERROR in bOutArray = hOutArray.builder.\n");
// get output force array from block.
//
MDataHandle hOut = bOutArray.addElement(multiIndex, &status);
McheckErr(status, "ERROR in hOut = bOutArray.addElement.\n");
MFnVectorArrayData fnOutputForce;
MObject dOutputForce = fnOutputForce.create( forceArray, &status );
McheckErr(status, "ERROR in dOutputForce = fnOutputForce.create\n");
// update data block with new output force data.
//
hOut.set( dOutputForce );
block.setClean( plug );
return( MS::kSuccess );
}
MStatus AlembicCurvesNode::compute(const MPlug &plug, MDataBlock &dataBlock)
{
ESS_PROFILE_SCOPE("AlembicCurvesNode::compute");
MStatus status;
// update the frame number to be imported
const double inputTime =
dataBlock.inputValue(mTimeAttr).asTime().as(MTime::kSeconds);
MString &fileName = dataBlock.inputValue(mFileNameAttr).asString();
MString &identifier = dataBlock.inputValue(mIdentifierAttr).asString();
// check if we have the file
if (fileName != mFileName || identifier != mIdentifier) {
mSchema.reset();
if (fileName != mFileName) {
delRefArchive(mFileName);
mFileName = fileName;
addRefArchive(mFileName);
}
mIdentifier = identifier;
// get the object from the archive
Abc::IObject iObj = getObjectFromArchive(mFileName, identifier);
if (!iObj.valid()) {
MGlobal::displayWarning("[ExocortexAlembic] Identifier '" + identifier +
"' not found in archive '" + mFileName + "'.");
return MStatus::kFailure;
}
AbcG::ICurves obj(iObj, Abc::kWrapExisting);
if (!obj.valid()) {
MGlobal::displayWarning("[ExocortexAlembic] Identifier '" + identifier +
"' in archive '" + mFileName +
"' is not a Curves.");
return MStatus::kFailure;
}
mObj = obj;
mSchema = obj.getSchema();
mCurvesData = MObject::kNullObj;
}
if (!mSchema.valid()) {
return MStatus::kFailure;
}
{
ESS_PROFILE_SCOPE("AlembicCurvesNode::compute readProps");
Alembic::Abc::ICompoundProperty arbProp = mSchema.getArbGeomParams();
Alembic::Abc::ICompoundProperty userProp = mSchema.getUserProperties();
readProps(inputTime, arbProp, dataBlock, thisMObject());
readProps(inputTime, userProp, dataBlock, thisMObject());
// Set all plugs as clean
// Even if one of them failed to get set,
// trying again in this frame isn't going to help
for (unsigned int i = 0; i < mGeomParamPlugs.length(); i++) {
dataBlock.outputValue(mGeomParamPlugs[i]).setClean();
}
for (unsigned int i = 0; i < mUserAttrPlugs.length(); i++) {
dataBlock.outputValue(mUserAttrPlugs[i]).setClean();
}
}
// get the sample
SampleInfo sampleInfo = getSampleInfo(inputTime, mSchema.getTimeSampling(),
mSchema.getNumSamples());
// check if we have to do this at all
if (!mCurvesData.isNull() &&
mLastSampleInfo.floorIndex == sampleInfo.floorIndex &&
mLastSampleInfo.ceilIndex == sampleInfo.ceilIndex) {
return MStatus::kSuccess;
}
mLastSampleInfo = sampleInfo;
const float blend = (float)sampleInfo.alpha;
// access the camera values
AbcG::ICurvesSchema::Sample sample;
AbcG::ICurvesSchema::Sample sample2;
mSchema.get(sample, sampleInfo.floorIndex);
if (blend != 0.0f) {
mSchema.get(sample2, sampleInfo.ceilIndex);
}
Abc::P3fArraySamplePtr samplePos = sample.getPositions();
Abc::P3fArraySamplePtr samplePos2 = sample2.getPositions();
Abc::Int32ArraySamplePtr nbVertices = sample.getCurvesNumVertices();
const bool applyBlending =
(blend == 0.0f) ? false : (samplePos->size() == samplePos2->size());
Abc::FloatArraySamplePtr pKnotVec = getKnotVector(mObj);
Abc::UInt16ArraySamplePtr pOrders = getCurveOrders(mObj);
MArrayDataHandle arrh = dataBlock.outputArrayValue(mOutGeometryAttr);
MArrayDataBuilder builder = arrh.builder();
// reference:
// http://download.autodesk.com/us/maya/2010help/API/multi_curve_node_8cpp-example.html
const int degree = (sample.getType() == AbcG::kCubic) ? 3 : 1;
const bool closed = (sample.getWrap() == AbcG::kPeriodic);
unsigned int pointOffset = 0;
unsigned int knotOffset = 0;
for (int ii = 0; ii < nbVertices->size(); ++ii) {
const unsigned int nbCVs = (unsigned int)nbVertices->get()[ii];
const int ldegree = (pOrders) ? pOrders->get()[ii] : degree;
const int nbSpans = (int)nbCVs - ldegree;
MDoubleArray knots;
if (pKnotVec) {
const unsigned int nb_knot = nbCVs + ldegree - 1;
for (unsigned int i = 0; i < nb_knot; ++i) {
knots.append(pKnotVec->get()[knotOffset + i]);
}
knotOffset += nb_knot;
}
else {
for (int span = 0; span <= nbSpans; ++span) {
knots.append(double(span));
if (span == 0 || span == nbSpans) {
for (int m = 1; m < degree; ++m) {
knots.append(double(span));
}
}
}
}
MPointArray points;
if (samplePos->size() > 0) {
points.setLength((unsigned int)nbCVs);
if (applyBlending) {
for (unsigned int i = 0; i < nbCVs; ++i) {
const Abc::P3fArraySample::value_type &vals1 =
samplePos->get()[pointOffset + i];
const Abc::P3fArraySample::value_type &vals2 =
samplePos2->get()[pointOffset + i];
MPoint &pt = points[i];
pt.x = vals1.x + (vals2.x - vals1.x) * blend;
pt.y = vals1.y + (vals2.y - vals1.y) * blend;
pt.z = vals1.z + (vals2.z - vals1.z) * blend;
}
}
else {
for (unsigned int i = 0; i < nbCVs; ++i) {
const Abc::P3fArraySample::value_type &vals =
samplePos->get()[pointOffset + i];
MPoint &pt = points[i];
pt.x = vals.x;
pt.y = vals.y;
pt.z = vals.z;
}
}
pointOffset += nbCVs;
}
// create a subd either with or without uvs
MObject mmCurvesData = MFnNurbsCurveData().create();
if (ldegree == 1 || ldegree == 3)
mCurves.create(points, knots, ldegree,
closed ? MFnNurbsCurve::kClosed : MFnNurbsCurve::kOpen,
false, false, mmCurvesData);
builder.addElement(ii).set(mmCurvesData);
}
arrh.set(builder);
arrh.setAllClean();
return MStatus::kSuccess;
}
MStatus weightControllerNode::compute( const MPlug& plug, MDataBlock& dataBlock){
MObject thisNode = thisMObject();
MStatus status;
if(plug != aOutputs || ! plug.isElement()){ return MS::kSuccess; }
float3 &uu = dataBlock.inputValue(aLocator).asFloat3();
Vector3f loc(uu[0],uu[1],uu[2]);
MArrayDataHandle hVertices=dataBlock.inputArrayValue(aVertices);
int num=hVertices.elementCount();
if(num==0){return MS::kSuccess; }
// compute the weight
std::vector< Vector3f > v(num);
std::vector< float > r(num);
for(int i=0;i<num;i++){
float3 &uu=hVertices.inputValue().asFloat3();
Vector3f u(uu[0],uu[1],uu[2]);
v[i] = u-loc;
r[i] = v[i].norm();
if(i<num-1){ hVertices.next(); }
}
std::vector<float> w(num, 0.0f), A(num), D(num);
for(int i=0;i<num;i++){
int j=(i+1)% num;
A[i]=(v[i].cross(v[j])).norm();
D[i]=v[i].dot(v[j]);
}
bool flag=true;
// check if it is on the boundary
for(int i=0;i<num;i++){
if(r[i]<EPSILON){ // at a vertex
w[i]=1.0;
flag=false;
break;
}else if(abs(A[i])<EPSILON && D[i] < 0){ // on an edge
int j=(i+1) % num;
w[i]=r[j];
w[j]=r[i];
flag=false;
break;
}
}
// if it is not on the boundary
if(flag){
for(int i=0;i<num;i++){
int k=(i-1+num)% num;
if(fabs(A[k])>EPSILON)
w[i]+=(r[k]-D[k]/r[i])/A[k];
if(fabs(A[i])>EPSILON)
w[i]+=(r[(i+1)% num]-D[i]/r[i])/A[i];
}
}
float sum=0.0;
for(unsigned int i=0;i<num;i++)
sum += w[i];
for(unsigned int i=0;i<num;i++)
w[i] /= sum;
// writing output
MPlug wPlug(thisNode, aOutputs);
MDataHandle wHandle = wPlug.constructHandle(dataBlock);
MArrayDataHandle arrayHandle(wHandle, &status);
CHECK_MSTATUS_AND_RETURN_IT(status);
MArrayDataBuilder arrayBuilder = arrayHandle.builder(&status);
CHECK_MSTATUS_AND_RETURN_IT(status);
for(unsigned int i = 0; i < num; i++) {
MDataHandle handle = arrayBuilder.addElement(i,&status);
CHECK_MSTATUS_AND_RETURN_IT(status);
handle.set(w[i]);
}
status = arrayHandle.set(arrayBuilder);
CHECK_MSTATUS_AND_RETURN_IT(status);
wPlug.setValue(wHandle);
dataBlock.setClean(plug);
return MS::kSuccess;
}
//-----------------------------------------------------------------------------
//
//-----------------------------------------------------------------------------
MStatus CVstWeldNode::compute(
const MPlug &mPlug,
MDataBlock &mDataBlock )
{
if ( mPlug == m_oaWeldOutput || mPlug == m_oaTranslate || mPlug == m_oaRotate ||
mPlug == m_oaTranslateX || mPlug == m_oaTranslateY || mPlug == m_oaTranslateZ ||
mPlug == m_oaRotateX || mPlug == m_oaRotateY || mPlug == m_oaRotateZ )
{
const MObject geoObj = mDataBlock.inputValue( m_iaWorldGeometry ).data();
if ( geoObj.apiType() == MFn::kMeshData )
{
MStatus mStatus;
MObject meshObj = mDataBlock.inputValue( m_iaWorldGeometry ).asMeshTransformed();
MFnMesh meshFn( meshObj );
MItMeshPolygon pIt( meshObj );
MPointArray facePoints;
MArrayDataHandle wiAH = mDataBlock.inputArrayValue( m_iaWeldInput );
MArrayDataHandle woAH = mDataBlock.outputArrayValue( m_oaWeldOutput, &mStatus );
MArrayDataBuilder woADB = woAH.builder( &mStatus );
const int nWeldCount = wiAH.elementCount();
for ( int i = 0; i < nWeldCount; ++i, wiAH.next() )
{
MDataHandle wiDH = wiAH.inputValue();
const MMatrix &offsetMatrix = wiDH.child( m_iaOffsetMatrix ).asMatrix();
const MMatrix &inverseParentSpace = wiDH.child( m_iaInverseParentSpace ).asMatrix();
const MEulerRotation::RotationOrder rotationOrder = static_cast< MEulerRotation::RotationOrder >( wiDH.child( m_iaRotateOrder ).asShort() );
MMatrix geoMatrix;
switch ( wiDH.child( m_iaType ).asShort() )
{
case kMeshFace:
{
const int nMeshFaceIndex = wiDH.child( m_iaInt ).asInt();
GetMeshMatrix( pIt, nMeshFaceIndex, geoMatrix );
}
break;
default:
merr << "Unknown Weld Type " << wiDH.child( m_iaType ).asShort() << std::endl;
break;
}
const int nWeldIndex = wiAH.elementIndex();
MDataHandle woDH = woADB.addElement( nWeldIndex );
MTransformationMatrix L( inverseParentSpace * offsetMatrix * geoMatrix );
woDH.child( m_oaTranslate ).set( L.getTranslation( MSpace::kWorld ) );
MEulerRotation e = L.rotation().asEulerRotation();
e.reorder( rotationOrder );
woDH.child( m_oaRotate ).set( e.asVector() );
}
}
else
{
merr << "Invalid .inputGeometry data of type: " << geoObj.apiTypeStr() << " found while computing " << mPlug.info() << std::endl;
return MS::kFailure;
}
return MS::kSuccess;
}
return MS::kUnknownParameter;
}
MStatus sweptEmitter::compute(const MPlug& plug, MDataBlock& block)
//
// Descriptions:
// Call emit emit method to generate new particles.
//
{
MStatus status;
// Determine if we are requesting the output plug for this emitter node.
//
if( !(plug == mOutput) )
return( MS::kUnknownParameter );
// Get the logical index of the element this plug refers to,
// because the node can be emitting particles into more
// than one particle shape.
//
int multiIndex = plug.logicalIndex( &status );
McheckErr(status, "ERROR in plug.logicalIndex.\n");
// Get output data arrays (position, velocity, or parentId)
// that the particle shape is holding from the previous frame.
//
MArrayDataHandle hOutArray = block.outputArrayValue(mOutput, &status);
McheckErr(status, "ERROR in hOutArray = block.outputArrayValue.\n");
// Create a builder to aid in the array construction efficiently.
//
MArrayDataBuilder bOutArray = hOutArray.builder( &status );
McheckErr(status, "ERROR in bOutArray = hOutArray.builder.\n");
// Get the appropriate data array that is being currently evaluated.
//
MDataHandle hOut = bOutArray.addElement(multiIndex, &status);
McheckErr(status, "ERROR in hOut = bOutArray.addElement.\n");
// Get the data and apply the function set.
//
MFnArrayAttrsData fnOutput;
MObject dOutput = fnOutput.create ( &status );
McheckErr(status, "ERROR in fnOutput.create.\n");
// Check if the particle object has reached it's maximum,
// hence is full. If it is full then just return with zero particles.
//
bool beenFull = isFullValue( multiIndex, block );
if( beenFull )
{
return( MS::kSuccess );
}
// Get deltaTime, currentTime and startTime.
// If deltaTime <= 0.0, or currentTime <= startTime,
// do not emit new pariticles and return.
//
MTime cT = currentTimeValue( block );
MTime sT = startTimeValue( multiIndex, block );
MTime dT = deltaTimeValue( multiIndex, block );
if( (cT <= sT) || (dT <= 0.0) )
{
// We do not emit particles before the start time,
// and do not emit particles when moving backwards in time.
//
// This code is necessary primarily the first time to
// establish the new data arrays allocated, and since we have
// already set the data array to length zero it does
// not generate any new particles.
//
hOut.set( dOutput );
block.setClean( plug );
return( MS::kSuccess );
}
// Get speed, direction vector, and inheritFactor attributes.
//
double speed = speedValue( block );
MVector dirV = directionVector( block );
double inheritFactor = inheritFactorValue( multiIndex, block );
// Get the position and velocity arrays to append new particle data.
//
MVectorArray fnOutPos = fnOutput.vectorArray("position", &status);
MVectorArray fnOutVel = fnOutput.vectorArray("velocity", &status);
// Convert deltaTime into seconds.
//
double dt = dT.as( MTime::kSeconds );
// Apply rotation to the direction vector
MVector rotatedV = useRotation ( dirV );
// position,
MVectorArray inPosAry;
// velocity
MVectorArray inVelAry;
// emission rate
MIntArray emitCountPP;
// Get the swept geometry data
//
MObject thisObj = this->thisMObject();
MPlug sweptPlug( thisObj, mSweptGeometry );
if ( sweptPlug.isConnected() )
{
MDataHandle sweptHandle = block.inputValue( mSweptGeometry );
// MObject sweptData = sweptHandle.asSweptGeometry();
MObject sweptData = sweptHandle.data();
MFnDynSweptGeometryData fnSweptData( sweptData );
// Curve emission
//
if (fnSweptData.lineCount() > 0) {
int numLines = fnSweptData.lineCount();
for ( int i=0; i<numLines; i++ )
{
inPosAry.clear();
inVelAry.clear();
emitCountPP.clear();
MDynSweptLine line = fnSweptData.sweptLine( i );
// ... process current line ...
MVector p1 = line.vertex( 0 );
MVector p2 = line.vertex( 1 );
inPosAry.append( p1 );
inPosAry.append( p2 );
inVelAry.append( MVector( 0,0,0 ) );
inVelAry.append( MVector( 0,0,0 ) );
// emit Rate for two points on line
emitCountPP.clear();
status = emitCountPerPoint( plug, block, 2, emitCountPP );
emit( inPosAry, inVelAry, emitCountPP,
dt, speed, inheritFactor, rotatedV, fnOutPos, fnOutVel );
}
}
// Surface emission (nurb or polygon)
//
if (fnSweptData.triangleCount() > 0) {
int numTriangles = fnSweptData.triangleCount();
for ( int i=0; i<numTriangles; i++ )
{
inPosAry.clear();
inVelAry.clear();
emitCountPP.clear();
MDynSweptTriangle tri = fnSweptData.sweptTriangle( i );
// ... process current triangle ...
MVector p1 = tri.vertex( 0 );
MVector p2 = tri.vertex( 1 );
MVector p3 = tri.vertex( 2 );
MVector center = p1 + p2 + p3;
center /= 3.0;
inPosAry.append( center );
inVelAry.append( MVector( 0,0,0 ) );
// emit Rate for two points on line
emitCountPP.clear();
status = emitCountPerPoint( plug, block, 1, emitCountPP );
emit( inPosAry, inVelAry, emitCountPP,
dt, speed, inheritFactor, rotatedV, fnOutPos, fnOutVel );
}
}
}
// Update the data block with new dOutput and set plug clean.
//
hOut.set( dOutput );
block.setClean( plug );
return( MS::kSuccess );
}
MStatus weightList::compute( const MPlug& plug, MDataBlock& block)
{
MStatus status = MS::kSuccess;
unsigned i, j;
MObject thisNode = thisMObject();
MPlug wPlug(thisNode, aWeights);
// Write into aWeightList
for( i = 0; i < 3; i++) {
status = wPlug.selectAncestorLogicalIndex( i, aWeightsList );
MDataHandle wHandle = wPlug.constructHandle(block);
MArrayDataHandle arrayHandle(wHandle, &status);
McheckErr(status, "arrayHandle construction failed\n");
MArrayDataBuilder arrayBuilder = arrayHandle.builder(&status);
McheckErr(status, "arrayBuilder accessing/construction failed\n");
for( j = 0; j < i+2; j++) {
MDataHandle handle = arrayBuilder.addElement(j,&status);
McheckErr(status, "addElement to arrayBuilder failed\n");
float val = 1.0f*(i+j);
handle.set(val);
}
status = arrayHandle.set(arrayBuilder);
McheckErr(status, "set arrayBuilder failed\n");
wPlug.setValue(wHandle);
wPlug.destructHandle(wHandle);
}
// Read from aWeightList and print out result
MArrayDataHandle arrayHandle = block.inputArrayValue(aWeightsList, &status);
McheckErr(status, "arrayHandle construction for aWeightsList failed\n");
unsigned count = arrayHandle.elementCount();
for( i = 0; i < count; i++) {
arrayHandle.jumpToElement(i);
MDataHandle eHandle = arrayHandle.inputValue(&status).child(aWeights);
McheckErr(status, "handle evaluation failed\n");
MArrayDataHandle eArrayHandle(eHandle, &status);
McheckErr(status, "arrayHandle construction for aWeights failed\n");
unsigned eCount = eArrayHandle.elementCount();
for( j = 0; j < eCount; j++) {
eArrayHandle.jumpToElement(j);
float weight = eArrayHandle.inputValue(&status).asFloat();
McheckErr(status, "weight evaluation error\n");
fprintf(stderr, "weightList[%u][%u] = %g\n",i,j,weight);
}
}
// Read from aWeightList and print out result using the more
// efficient jumpToArrayElement() call
arrayHandle = block.inputArrayValue(aWeightsList, &status);
McheckErr(status, "arrayHandle construction for aWeightsList failed\n");
count = arrayHandle.elementCount();
for( i = 0; i < count; i++) {
arrayHandle.jumpToArrayElement(i);
MDataHandle eHandle = arrayHandle.inputValue(&status).child(aWeights);
McheckErr(status, "handle evaluation failed\n");
MArrayDataHandle eArrayHandle(eHandle, &status);
McheckErr(status, "arrayHandle construction for aWeights failed\n");
unsigned eCount = eArrayHandle.elementCount();
for( j = 0; j < eCount; j++) {
eArrayHandle.jumpToArrayElement(j);
float weight = eArrayHandle.inputValue(&status).asFloat();
McheckErr(status, "weight evaluation error\n");
fprintf(stderr, "weightList[%d][%d] = %g\n",i,j,weight);
}
}
return status;
}
