void MapSector::getBlocks(MapBlockVect &dest)
{
for(std::map<s16, MapBlock*>::iterator bi = m_blocks.begin();
bi != m_blocks.end(); ++bi)
{
dest.push_back(bi->second);
}
}
void ClientMap::updateDrawList(video::IVideoDriver* driver)
{
ScopeProfiler sp(g_profiler, "CM::updateDrawList()", SPT_AVG);
g_profiler->add("CM::updateDrawList() count", 1);
INodeDefManager *nodemgr = m_gamedef->ndef();
for (std::map<v3s16, MapBlock*>::iterator i = m_drawlist.begin();
i != m_drawlist.end(); ++i) {
MapBlock *block = i->second;
block->refDrop();
}
m_drawlist.clear();
v3f camera_position = m_camera_position;
v3f camera_direction = m_camera_direction;
f32 camera_fov = m_camera_fov;
// Use a higher fov to accomodate faster camera movements.
// Blocks are cropped better when they are drawn.
// Or maybe they aren't? Well whatever.
camera_fov *= 1.2;
v3s16 cam_pos_nodes = floatToInt(camera_position, BS);
v3s16 p_blocks_min;
v3s16 p_blocks_max;
getBlocksInViewRange(cam_pos_nodes, &p_blocks_min, &p_blocks_max);
// Number of blocks in rendering range
u32 blocks_in_range = 0;
// Number of blocks occlusion culled
u32 blocks_occlusion_culled = 0;
// Number of blocks in rendering range but don't have a mesh
u32 blocks_in_range_without_mesh = 0;
// Blocks that had mesh that would have been drawn according to
// rendering range (if max blocks limit didn't kick in)
u32 blocks_would_have_drawn = 0;
// Blocks that were drawn and had a mesh
u32 blocks_drawn = 0;
// Blocks which had a corresponding meshbuffer for this pass
//u32 blocks_had_pass_meshbuf = 0;
// Blocks from which stuff was actually drawn
//u32 blocks_without_stuff = 0;
// Distance to farthest drawn block
float farthest_drawn = 0;
for (std::map<v2s16, MapSector*>::iterator si = m_sectors.begin();
si != m_sectors.end(); ++si) {
MapSector *sector = si->second;
v2s16 sp = sector->getPos();
if (m_control.range_all == false) {
if (sp.X < p_blocks_min.X || sp.X > p_blocks_max.X ||
sp.Y < p_blocks_min.Z || sp.Y > p_blocks_max.Z)
continue;
}
MapBlockVect sectorblocks;
sector->getBlocks(sectorblocks);
/*
Loop through blocks in sector
*/
u32 sector_blocks_drawn = 0;
for (MapBlockVect::iterator i = sectorblocks.begin();
i != sectorblocks.end(); ++i) {
MapBlock *block = *i;
/*
Compare block position to camera position, skip
if not seen on display
*/
if (block->mesh != NULL)
block->mesh->updateCameraOffset(m_camera_offset);
float range = 100000 * BS;
if (m_control.range_all == false)
range = m_control.wanted_range * BS;
float d = 0.0;
if (!isBlockInSight(block->getPos(), camera_position,
camera_direction, camera_fov, range, &d))
continue;
// This is ugly (spherical distance limit?)
/*if(m_control.range_all == false &&
d - 0.5*BS*MAP_BLOCKSIZE > range)
continue;*/
blocks_in_range++;
/*
Ignore if mesh doesn't exist
*/
{
//MutexAutoLock lock(block->mesh_mutex);
if (block->mesh == NULL) {
blocks_in_range_without_mesh++;
continue;
}
}
/*
Occlusion culling
*/
// No occlusion culling when free_move is on and camera is
// inside ground
bool occlusion_culling_enabled = true;
if (g_settings->getBool("free_move")) {
MapNode n = getNodeNoEx(cam_pos_nodes);
if (n.getContent() == CONTENT_IGNORE ||
nodemgr->get(n).solidness == 2)
occlusion_culling_enabled = false;
}
v3s16 cpn = block->getPos() * MAP_BLOCKSIZE;
cpn += v3s16(MAP_BLOCKSIZE / 2, MAP_BLOCKSIZE / 2, MAP_BLOCKSIZE / 2);
float step = BS * 1;
float stepfac = 1.1;
float startoff = BS * 1;
// The occlusion search of 'isOccluded()' must stop short of the target
// point by distance 'endoff' (end offset) to not enter the target mapblock.
// For the 8 mapblock corners 'endoff' must therefore be the maximum diagonal
// of a mapblock, because we must consider all view angles.
// sqrt(1^2 + 1^2 + 1^2) = 1.732
float endoff = -BS * MAP_BLOCKSIZE * 1.732050807569;
v3s16 spn = cam_pos_nodes;
s16 bs2 = MAP_BLOCKSIZE / 2 + 1;
// to reduce the likelihood of falsely occluded blocks
// require at least two solid blocks
// this is a HACK, we should think of a more precise algorithm
u32 needed_count = 2;
if (occlusion_culling_enabled &&
// For the central point of the mapblock 'endoff' can be halved
isOccluded(this, spn, cpn,
step, stepfac, startoff, endoff / 2.0f, needed_count, nodemgr) &&
isOccluded(this, spn, cpn + v3s16(bs2,bs2,bs2),
step, stepfac, startoff, endoff, needed_count, nodemgr) &&
isOccluded(this, spn, cpn + v3s16(bs2,bs2,-bs2),
step, stepfac, startoff, endoff, needed_count, nodemgr) &&
isOccluded(this, spn, cpn + v3s16(bs2,-bs2,bs2),
step, stepfac, startoff, endoff, needed_count, nodemgr) &&
isOccluded(this, spn, cpn + v3s16(bs2,-bs2,-bs2),
step, stepfac, startoff, endoff, needed_count, nodemgr) &&
isOccluded(this, spn, cpn + v3s16(-bs2,bs2,bs2),
step, stepfac, startoff, endoff, needed_count, nodemgr) &&
isOccluded(this, spn, cpn + v3s16(-bs2,bs2,-bs2),
step, stepfac, startoff, endoff, needed_count, nodemgr) &&
isOccluded(this, spn, cpn + v3s16(-bs2,-bs2,bs2),
step, stepfac, startoff, endoff, needed_count, nodemgr) &&
isOccluded(this, spn, cpn + v3s16(-bs2,-bs2,-bs2),
step, stepfac, startoff, endoff, needed_count, nodemgr)) {
blocks_occlusion_culled++;
continue;
}
// This block is in range. Reset usage timer.
block->resetUsageTimer();
// Limit block count in case of a sudden increase
blocks_would_have_drawn++;
if (blocks_drawn >= m_control.wanted_max_blocks &&
!m_control.range_all &&
d > m_control.wanted_range * BS)
continue;
// Add to set
block->refGrab();
m_drawlist[block->getPos()] = block;
sector_blocks_drawn++;
blocks_drawn++;
if (d / BS > farthest_drawn)
farthest_drawn = d / BS;
} // foreach sectorblocks
if (sector_blocks_drawn != 0)
m_last_drawn_sectors.insert(sp);
}
m_control.blocks_would_have_drawn = blocks_would_have_drawn;
m_control.blocks_drawn = blocks_drawn;
m_control.farthest_drawn = farthest_drawn;
g_profiler->avg("CM: blocks in range", blocks_in_range);
g_profiler->avg("CM: blocks occlusion culled", blocks_occlusion_culled);
if (blocks_in_range != 0)
g_profiler->avg("CM: blocks in range without mesh (frac)",
(float)blocks_in_range_without_mesh / blocks_in_range);
g_profiler->avg("CM: blocks drawn", blocks_drawn);
g_profiler->avg("CM: farthest drawn", farthest_drawn);
g_profiler->avg("CM: wanted max blocks", m_control.wanted_max_blocks);
}
void ClientMap::updateDrawList(video::IVideoDriver* driver)
{
ScopeProfiler sp(g_profiler, "CM::updateDrawList()", SPT_AVG);
g_profiler->add("CM::updateDrawList() count", 1);
for (std::map<v3s16, MapBlock*>::iterator i = m_drawlist.begin();
i != m_drawlist.end(); ++i) {
MapBlock *block = i->second;
block->refDrop();
}
m_drawlist.clear();
v3f camera_position = m_camera_position;
v3f camera_direction = m_camera_direction;
f32 camera_fov = m_camera_fov;
// Use a higher fov to accomodate faster camera movements.
// Blocks are cropped better when they are drawn.
// Or maybe they aren't? Well whatever.
camera_fov *= 1.2;
v3s16 cam_pos_nodes = floatToInt(camera_position, BS);
v3s16 p_blocks_min;
v3s16 p_blocks_max;
getBlocksInViewRange(cam_pos_nodes, &p_blocks_min, &p_blocks_max);
// Number of blocks in rendering range
u32 blocks_in_range = 0;
// Number of blocks occlusion culled
u32 blocks_occlusion_culled = 0;
// Number of blocks in rendering range but don't have a mesh
u32 blocks_in_range_without_mesh = 0;
// Blocks that had mesh that would have been drawn according to
// rendering range (if max blocks limit didn't kick in)
u32 blocks_would_have_drawn = 0;
// Blocks that were drawn and had a mesh
u32 blocks_drawn = 0;
// Blocks which had a corresponding meshbuffer for this pass
//u32 blocks_had_pass_meshbuf = 0;
// Blocks from which stuff was actually drawn
//u32 blocks_without_stuff = 0;
// Distance to farthest drawn block
float farthest_drawn = 0;
// No occlusion culling when free_move is on and camera is
// inside ground
bool occlusion_culling_enabled = true;
if (g_settings->getBool("free_move")) {
MapNode n = getNodeNoEx(cam_pos_nodes);
if (n.getContent() == CONTENT_IGNORE ||
m_nodedef->get(n).solidness == 2)
occlusion_culling_enabled = false;
}
for (std::map<v2s16, MapSector*>::iterator si = m_sectors.begin();
si != m_sectors.end(); ++si) {
MapSector *sector = si->second;
v2s16 sp = sector->getPos();
if (m_control.range_all == false) {
if (sp.X < p_blocks_min.X || sp.X > p_blocks_max.X ||
sp.Y < p_blocks_min.Z || sp.Y > p_blocks_max.Z)
continue;
}
MapBlockVect sectorblocks;
sector->getBlocks(sectorblocks);
/*
Loop through blocks in sector
*/
u32 sector_blocks_drawn = 0;
for (MapBlockVect::iterator i = sectorblocks.begin();
i != sectorblocks.end(); ++i) {
MapBlock *block = *i;
/*
Compare block position to camera position, skip
if not seen on display
*/
if (block->mesh)
block->mesh->updateCameraOffset(m_camera_offset);
float range = 100000 * BS;
if (!m_control.range_all)
range = m_control.wanted_range * BS;
float d = 0.0;
if (!isBlockInSight(block->getPos(), camera_position,
camera_direction, camera_fov, range, &d))
continue;
blocks_in_range++;
/*
Ignore if mesh doesn't exist
*/
if (!block->mesh) {
blocks_in_range_without_mesh++;
continue;
}
/*
Occlusion culling
*/
if (occlusion_culling_enabled && isBlockOccluded(block, cam_pos_nodes)) {
blocks_occlusion_culled++;
continue;
}
// This block is in range. Reset usage timer.
block->resetUsageTimer();
// Limit block count in case of a sudden increase
blocks_would_have_drawn++;
if (blocks_drawn >= m_control.wanted_max_blocks &&
!m_control.range_all &&
d > m_control.wanted_range * BS)
continue;
// Add to set
block->refGrab();
m_drawlist[block->getPos()] = block;
sector_blocks_drawn++;
blocks_drawn++;
if (d / BS > farthest_drawn)
farthest_drawn = d / BS;
} // foreach sectorblocks
if (sector_blocks_drawn != 0)
m_last_drawn_sectors.insert(sp);
}
m_control.blocks_would_have_drawn = blocks_would_have_drawn;
m_control.blocks_drawn = blocks_drawn;
m_control.farthest_drawn = farthest_drawn;
g_profiler->avg("CM: blocks in range", blocks_in_range);
g_profiler->avg("CM: blocks occlusion culled", blocks_occlusion_culled);
if (blocks_in_range != 0)
g_profiler->avg("CM: blocks in range without mesh (frac)",
(float)blocks_in_range_without_mesh / blocks_in_range);
g_profiler->avg("CM: blocks drawn", blocks_drawn);
g_profiler->avg("CM: farthest drawn", farthest_drawn);
g_profiler->avg("CM: wanted max blocks", m_control.wanted_max_blocks);
}
void MapSector::getBlocks(MapBlockVect &dest)
{
for (auto &block : m_blocks) {
dest.push_back(block.second);
}
}
void ClientMap::updateDrawList(video::IVideoDriver* driver)
{
ScopeProfiler sp(g_profiler, "CM::updateDrawList()", SPT_AVG);
g_profiler->add("CM::updateDrawList() count", 1);
INodeDefManager *nodemgr = m_gamedef->ndef();
for(std::map<v3s16, MapBlock*>::iterator
i = m_drawlist.begin();
i != m_drawlist.end(); ++i)
{
MapBlock *block = i->second;
block->refDrop();
}
m_drawlist.clear();
m_camera_mutex.lock();
v3f camera_position = m_camera_position;
v3f camera_direction = m_camera_direction;
f32 camera_fov = m_camera_fov;
//v3s16 camera_offset = m_camera_offset;
m_camera_mutex.unlock();
// Use a higher fov to accomodate faster camera movements.
// Blocks are cropped better when they are drawn.
// Or maybe they aren't? Well whatever.
camera_fov *= 1.2;
v3s16 cam_pos_nodes = floatToInt(camera_position, BS);
v3s16 box_nodes_d = m_control.wanted_range * v3s16(1,1,1);
v3s16 p_nodes_min = cam_pos_nodes - box_nodes_d;
v3s16 p_nodes_max = cam_pos_nodes + box_nodes_d;
// Take a fair amount as we will be dropping more out later
// Umm... these additions are a bit strange but they are needed.
v3s16 p_blocks_min(
p_nodes_min.X / MAP_BLOCKSIZE - 3,
p_nodes_min.Y / MAP_BLOCKSIZE - 3,
p_nodes_min.Z / MAP_BLOCKSIZE - 3);
v3s16 p_blocks_max(
p_nodes_max.X / MAP_BLOCKSIZE + 1,
p_nodes_max.Y / MAP_BLOCKSIZE + 1,
p_nodes_max.Z / MAP_BLOCKSIZE + 1);
// Number of blocks in rendering range
u32 blocks_in_range = 0;
// Number of blocks occlusion culled
u32 blocks_occlusion_culled = 0;
// Number of blocks in rendering range but don't have a mesh
u32 blocks_in_range_without_mesh = 0;
// Blocks that had mesh that would have been drawn according to
// rendering range (if max blocks limit didn't kick in)
u32 blocks_would_have_drawn = 0;
// Blocks that were drawn and had a mesh
u32 blocks_drawn = 0;
// Blocks which had a corresponding meshbuffer for this pass
//u32 blocks_had_pass_meshbuf = 0;
// Blocks from which stuff was actually drawn
//u32 blocks_without_stuff = 0;
// Distance to farthest drawn block
float farthest_drawn = 0;
for(std::map<v2s16, MapSector*>::iterator
si = m_sectors.begin();
si != m_sectors.end(); ++si)
{
MapSector *sector = si->second;
v2s16 sp = sector->getPos();
if(m_control.range_all == false)
{
if(sp.X < p_blocks_min.X
|| sp.X > p_blocks_max.X
|| sp.Y < p_blocks_min.Z
|| sp.Y > p_blocks_max.Z)
continue;
}
MapBlockVect sectorblocks;
sector->getBlocks(sectorblocks);
/*
Loop through blocks in sector
*/
u32 sector_blocks_drawn = 0;
for(MapBlockVect::iterator i = sectorblocks.begin();
i != sectorblocks.end(); ++i)
{
MapBlock *block = *i;
/*
Compare block position to camera position, skip
if not seen on display
*/
if (block->mesh != NULL)
block->mesh->updateCameraOffset(m_camera_offset);
float range = 100000 * BS;
if(m_control.range_all == false)
range = m_control.wanted_range * BS;
float d = 0.0;
if(isBlockInSight(block->getPos(), camera_position,
camera_direction, camera_fov,
range, &d) == false)
{
continue;
}
// This is ugly (spherical distance limit?)
/*if(m_control.range_all == false &&
d - 0.5*BS*MAP_BLOCKSIZE > range)
continue;*/
blocks_in_range++;
/*
Ignore if mesh doesn't exist
*/
{
//MutexAutoLock lock(block->mesh_mutex);
if(block->mesh == NULL){
blocks_in_range_without_mesh++;
continue;
}
}
/*
Occlusion culling
*/
// No occlusion culling when free_move is on and camera is
// inside ground
bool occlusion_culling_enabled = true;
if(g_settings->getBool("free_move")){
MapNode n = getNodeNoEx(cam_pos_nodes);
if(n.getContent() == CONTENT_IGNORE ||
nodemgr->get(n).solidness == 2)
occlusion_culling_enabled = false;
}
v3s16 cpn = block->getPos() * MAP_BLOCKSIZE;
cpn += v3s16(MAP_BLOCKSIZE/2, MAP_BLOCKSIZE/2, MAP_BLOCKSIZE/2);
float step = BS*1;
float stepfac = 1.1;
float startoff = BS*1;
float endoff = -BS*MAP_BLOCKSIZE*1.42*1.42;
v3s16 spn = cam_pos_nodes + v3s16(0,0,0);
s16 bs2 = MAP_BLOCKSIZE/2 + 1;
u32 needed_count = 1;
if(
occlusion_culling_enabled &&
isOccluded(this, spn, cpn + v3s16(0,0,0),
step, stepfac, startoff, endoff, needed_count, nodemgr) &&
isOccluded(this, spn, cpn + v3s16(bs2,bs2,bs2),
step, stepfac, startoff, endoff, needed_count, nodemgr) &&
isOccluded(this, spn, cpn + v3s16(bs2,bs2,-bs2),
step, stepfac, startoff, endoff, needed_count, nodemgr) &&
isOccluded(this, spn, cpn + v3s16(bs2,-bs2,bs2),
step, stepfac, startoff, endoff, needed_count, nodemgr) &&
isOccluded(this, spn, cpn + v3s16(bs2,-bs2,-bs2),
step, stepfac, startoff, endoff, needed_count, nodemgr) &&
isOccluded(this, spn, cpn + v3s16(-bs2,bs2,bs2),
step, stepfac, startoff, endoff, needed_count, nodemgr) &&
isOccluded(this, spn, cpn + v3s16(-bs2,bs2,-bs2),
step, stepfac, startoff, endoff, needed_count, nodemgr) &&
isOccluded(this, spn, cpn + v3s16(-bs2,-bs2,bs2),
step, stepfac, startoff, endoff, needed_count, nodemgr) &&
isOccluded(this, spn, cpn + v3s16(-bs2,-bs2,-bs2),
step, stepfac, startoff, endoff, needed_count, nodemgr)
)
{
blocks_occlusion_culled++;
continue;
}
// This block is in range. Reset usage timer.
block->resetUsageTimer();
// Limit block count in case of a sudden increase
blocks_would_have_drawn++;
if(blocks_drawn >= m_control.wanted_max_blocks
&& m_control.range_all == false
&& d > m_control.wanted_min_range * BS)
continue;
// Add to set
block->refGrab();
m_drawlist[block->getPos()] = block;
sector_blocks_drawn++;
blocks_drawn++;
if(d/BS > farthest_drawn)
farthest_drawn = d/BS;
} // foreach sectorblocks
if(sector_blocks_drawn != 0)
m_last_drawn_sectors.insert(sp);
}
m_control.blocks_would_have_drawn = blocks_would_have_drawn;
m_control.blocks_drawn = blocks_drawn;
m_control.farthest_drawn = farthest_drawn;
g_profiler->avg("CM: blocks in range", blocks_in_range);
g_profiler->avg("CM: blocks occlusion culled", blocks_occlusion_culled);
if(blocks_in_range != 0)
g_profiler->avg("CM: blocks in range without mesh (frac)",
(float)blocks_in_range_without_mesh/blocks_in_range);
g_profiler->avg("CM: blocks drawn", blocks_drawn);
g_profiler->avg("CM: farthest drawn", farthest_drawn);
g_profiler->avg("CM: wanted max blocks", m_control.wanted_max_blocks);
}
