void ON_GL( const ON_Color& rc, double alpha, GLfloat c[4] )
{
c[0] = (GLfloat)rc.FractionRed();
c[1] = (GLfloat)rc.FractionGreen();
c[2] = (GLfloat)rc.FractionBlue();
c[3] = (GLfloat)alpha;
}
void ON_GL( const ON_Color& rc, GLfloat c[4] )
{
c[0] = (GLfloat)rc.FractionRed();
c[1] = (GLfloat)rc.FractionGreen();
c[2] = (GLfloat)rc.FractionBlue();
c[3] = (GLfloat)1.0;
}
void ON_TextLog::PrintRGB( const ON_Color& color )
{
if ( color == ON_UNSET_COLOR )
Print("ON_UNSET_COLOR");
else
Print("%d %d %d",color.Red(),color.Green(),color.Blue());
}
ON_Color CZAnalysisVAM::FalseColor(double z) const
{
// Simple example of one way to change a number
// into a color.
double s = m_z_range.NormalizedParameterAt(z);
if ( s < 0.0 ) s = 0.0; else if (s > 1.0) s = 1.0;
double hue = m_hue_range.ParameterAt(s);
ON_Color c;
c.SetHSV( hue, 1.0, 1.0 );
return c;
}
bool gfxRhino3D::loadCAD(QString filename){
int i, layer;
ON_Color objCol;
//Load geometry...
if (filename.endsWith(".3dm")){
load3dm(filename);
for (i=0;i<model.m_object_table.Count();i++){
layer=model.m_object_table[i].m_attributes.m_layer_index;
if (model.m_layer_table[layer].IsVisible()){
if (ON::color_from_object == model.m_object_table[i].m_attributes.ColorSource()){
objCol=model.m_object_table[i].m_attributes.m_color;
}else{
objCol=model.m_layer_table[layer].Color();
}
parentObject->actor.push_back( createActor(model.m_object_table[i].m_object, objCol.FractionRed(), objCol.FractionGreen(), objCol.FractionBlue()) );
}
}
}
for (i=0;i<parentObject->actor.size();i++) parentObject->renderer->AddActor(parentObject->actor[i]);
return true;
}
void CRhGLShaderProgram::SetupMaterial(const ON_Material& mat)
{
ON_Color dcolor = mat.Diffuse();
ON_Color scolor = mat.Specular();
ON_Color ecolor = mat.Emission();
GLfloat alpha = (GLfloat)(1.0 - mat.Transparency());
GLfloat shine = 128.0*(mat.Shine() / ON_Material::MaxShine());
GLfloat black[4] = {0.0,0.0,0.0,1.0};
GLfloat ambi[4] = { mat.Ambient().FractionRed(), mat.Ambient().FractionGreen(), mat.Ambient().FractionBlue(), mat.m_ambient.FractionAlpha() };
GLfloat diff[4] = { dcolor.FractionRed(), dcolor.FractionGreen(), dcolor.FractionBlue(), alpha };
GLfloat spec[4] = { scolor.FractionRed(), scolor.FractionGreen(), scolor.FractionBlue(), 1.0f };
GLfloat emmi[4] = { ecolor.FractionRed(), ecolor.FractionGreen(), ecolor.FractionBlue(), 1.0f };
GLfloat* pspec = shine?spec:black;
if ( m_Uniforms.rglLightAmbient >= 0) {
if (mat.m_ambient.Alpha() > 0)
glUniform4fv( m_Uniforms.rglLightAmbient, 1, ambi );
else
glUniform4fv( m_Uniforms.rglLightAmbient, 1, black );
}
if ( m_Uniforms.rglDiffuse >= 0 )
glUniform4fv( m_Uniforms.rglDiffuse, 1, diff );
if ( m_Uniforms.rglSpecular >= 0 )
glUniform4fv( m_Uniforms.rglSpecular, 1, pspec );
if ( m_Uniforms.rglEmission >= 0 )
glUniform4fv( m_Uniforms.rglEmission, 1, emmi );
if ( m_Uniforms.rglShininess >= 0 )
glUniform1f( m_Uniforms.rglShininess, shine );
if ( m_Uniforms.rglUsesColors >= 0 )
glUniform1i( m_Uniforms.rglUsesColors, 0 );
if (alpha < 1.0)
glEnable( GL_BLEND );
else
glDisable( GL_BLEND );
}
CRhinoCommand::result CGenCylinder::RunCommand( const CRhinoCommandContext& context )
{
Cscript1PlugIn& plugin = script1PlugIn();
if( !plugin.IsDlgVisible() )
{
return CRhinoCommand::nothing;
}
/*****************************************/
/*CHECKING IF THERE IS ALREADY A CYLINDER*/
/*****************************************/
const CRhinoLayer& layer = context.m_doc.m_layer_table.CurrentLayer();
ON_SimpleArray<CRhinoObject*> objects;
int object_count = context.m_doc.LookupObject( layer, objects );
const CRhinoBrepObject* brep_obj;
const CRhinoCurveObject* curve_obj;
const CRhinoSurfaceObject* surface_obj;
int surf_count=0;
if( object_count > 0 )
{
int brep_obj_count = 0;
int polycurve_count = 0;
const CRhinoObject* object = 0;
for(int i = 0; i < object_count; i++ )
{
object = objects[ i ];
/************************************/
/*TRY CASTING AS A RHINO BREP OBJECT*/
/************************************/
brep_obj = CRhinoBrepObject::Cast( object );
if( brep_obj && object->IsSolid())
{
brep_obj_count++;
}
/*******************************/
/*TRY CASTING AS A CURVE OBJECT*/
/*******************************/
curve_obj = CRhinoCurveObject::Cast( object );
if( curve_obj )
{
polycurve_count++;
}
//surface_obj = CRhinoSurfaceObject::Cast( object );
// if( surface_obj )
// {
//surf_count++;
// }
}
if( brep_obj_count == 0)
{
ON_3dPoint center_point( 0.0, 0.0, 0.0 );
double radius = 63.5;
int __count = plugin.m_dialog->m_comboAltTacco.GetCount();
int nIndex = plugin.m_dialog->m_comboAltTacco.GetCurSel();
CString strCBText;
plugin.m_dialog->m_comboAltTacco.GetLBText( nIndex, strCBText);
int height = _wtoi(strCBText);
ON_3dPoint height_point( 0.0, 0.0, height);
ON_3dVector zaxis = height_point - center_point;
ON_Plane planeCir( center_point, zaxis );
/*ADD CIRCLE FOR CYLINDER'S BASE*/
ON_Circle circle( planeCir, radius );
/*ADD CYLINDER*/
ON_Cylinder cylinder( circle, zaxis.Length() );
ON_Brep* brep = ON_BrepCylinder( cylinder, TRUE, TRUE );
unsigned int first_SN;
unsigned int next_SN;
if( brep )
{
first_SN = CRhinoObject::NextRuntimeObjectSerialNumber();
/********************/
/*TRANSLATE CYLINDER*/
/********************/
int nIndex1 = plugin.m_dialog->AltezzaFondelloControllo.GetCurSel();
CString strCBText1;
plugin.m_dialog->AltezzaFondelloControllo.GetLBText( nIndex1, strCBText1);
int altfondello = _wtoi(strCBText1);
ON_wString obj_nameCyl = L"CILINDRO";
brep->Translate(ON_3dVector( 0.0, 0.0, -altfondello));
CRhinoBrepObject* cylinder_object = new CRhinoBrepObject();
cylinder_object->SetBrep( brep );
if( context.m_doc.AddObject(cylinder_object) )
{
context.m_doc.Redraw();
next_SN = CRhinoObject::NextRuntimeObjectSerialNumber();
if( first_SN == next_SN )
{
return CRhinoCommand::nothing;
}
else
{
SetNametoObject(context.m_doc,first_SN,obj_nameCyl,true);
}
}
else
{
delete cylinder_object;
}
/*********************************************/
/* DA SISTEMARE */
/*********************************************/
CRhinoSnapContext snap;
bool dec1 = snap.SnapToPoint(ON_3dPoint(63.5, 0.0, (height - altfondello)));
bool dec2 = snap.SnapToPoint(ON_3dPoint(63.5, 0.0, -altfondello));
bool dec3 = snap.SnapToPoint(ON_3dPoint(63.5, 0.0, 0.0));
if(dec1 && dec2)
{
CRhinoLinearDimension* dim_obj = new CRhinoLinearDimension();
ON_Plane plane( ON_zx_plane );
plane.SetOrigin( ON_3dPoint(63.5, 0.0, 0.0) );
dim_obj->SetPlane( plane );
ON_3dPoint pt_1(63.5, 0.0, (height - altfondello));
ON_3dPoint pt_2(63.5, 0.0, -altfondello);
double u, v;
plane.ClosestPointTo( pt_1, &u, &v );
dim_obj->SetPoint( 0, ON_2dPoint(u, v) );
dim_obj->SetPoint( 1, ON_2dPoint(u, (v + height/2)) );
plane.ClosestPointTo( pt_2, &u, &v );
dim_obj->SetPoint( 2, ON_2dPoint(u, v) );
dim_obj->SetPoint( 3, ON_2dPoint(u, (v + height/2)) );
dim_obj->UpdateText();
if( context.m_doc.AddObject(dim_obj) )
{
context.m_doc.Redraw();
}
else
{
delete dim_obj;
}
}
/*********************************************/
/* DA SISTEMARE */
/*********************************************/
if(dec2 && dec3)
{
CRhinoLinearDimension* dim_obj = new CRhinoLinearDimension();
ON_Plane plane( ON_zx_plane );
plane.SetOrigin( ON_3dPoint(63.5, 0.0, 0.0) );
dim_obj->SetPlane( plane );
ON_3dPoint pt_1(63.5, 0.0, 0.0);
ON_3dPoint pt_2(63.5, 0.0, -altfondello);
double u, v;
plane.ClosestPointTo( pt_1, &u, &v );
dim_obj->SetPoint( 0, ON_2dPoint(u, v) );
dim_obj->SetPoint( 1, ON_2dPoint(u, (v + height/2)) );
plane.ClosestPointTo( pt_2, &u, &v );
dim_obj->SetPoint( 2, ON_2dPoint(u, v) );
dim_obj->SetPoint( 3, ON_2dPoint(u, (v + height/2)) );
dim_obj->UpdateText();
if( context.m_doc.AddObject(dim_obj) )
{
context.m_doc.Redraw();
}
else
{
delete dim_obj;
}
}
/*********************************************/
/* DA SISTEMARE By Nello */
/*********************************************/
ON_3dPoint provapunto2 = AltezzaTacco;
ON_3dPoint provapunto(59.5,0,provapunto2.z);
provapunto.z-=0.7;
ON_3dPoint pt_1(59.5, 0.0, (height - altfondello));
CRhinoLinearDimension* dim_obj = new CRhinoLinearDimension();
ON_Plane plane( ON_zx_plane );
plane.SetOrigin(pt_1);
dim_obj->SetPlane( plane );
//ON_3dPoint pt_1(63.5, 0.0, 0.0);
ON_3dPoint pt_2 = provapunto;
double u, v;
plane.ClosestPointTo( pt_1, &u, &v );
dim_obj->SetPoint( 0, ON_2dPoint(u, v) );
dim_obj->SetPoint( 1, ON_2dPoint(u, (v + height/2)) );
plane.ClosestPointTo( pt_2, &u, &v );
dim_obj->SetPoint( 2, ON_2dPoint(u, v) );
dim_obj->SetPoint( 3, ON_2dPoint(u, (v + height/2)) );
dim_obj->UpdateText();
if( context.m_doc.AddObject(dim_obj) )
{
context.m_doc.Redraw();
}
else
{
delete dim_obj;
}
/*INIZIO FUNZIONE CONTROLLO*/
if ( (height - altfondello)>=provapunto.z+10){
::RhinoApp().Print( L"Funzione controllo altezza OK");
}
else{
::RhinoApp().Print( L"Funzione controllo altezza NOK: CONTROLLARE!! Il valore della testa e' minore del valore minimo di 10 mm. Occorre diminuire l'altezza del fondello o aumentare l'altezza dello stampo.");
}
/*********************************************/
/* CREATE FONDELLO PLANE */
/*********************************************/
ON_3dPoint point0((63.5 + 20.0),0.0, 0.0);
ON_3dPoint point1(-(63.5 + 20.0),0.0, 0.0);
ON_LineCurve curve0( point0, point1 );
context.m_doc.AddCurveObject(curve0);
context.m_doc.Redraw();
/******************************************************/
/*****************************/
/*USER GIVES NAME TO SURFACES*/
/*****************************/
unsigned int first_sn;
unsigned int next_sn;
ON_wString obj_name;
object_count = context.m_doc.LookupObject( layer, objects );
for(int i = 0; i < object_count; i++ )
{
object = objects[ i ];
first_sn = CRhinoObject::NextRuntimeObjectSerialNumber();
/*******************************/
/*TRY CASTING AS A CURVE OBJECT*/
/*******************************/
curve_obj = CRhinoCurveObject::Cast( object );
if( curve_obj )
{
const ON_Geometry* geo = curve_obj->Geometry();
const ON_Curve* curve00 = ON_Curve::Cast(geo);
ON_3dPoint point = curve00->PointAt(0.0);
ON_3dPoint point_ = curve00->PointAt(1.0);
if((point.z + point_.z)/2 > 0.0)
{
obj_name = L"SURFPV";
}
else
{
obj_name = L"SURFFO";
}
ON_3dPoint point0(point.x, (point.y + 70.0), point.z);
ON_3dPoint point1(point.x, (point.y - 70.0), point.z);
ON_LineCurve* curve = new ON_LineCurve();
curve->SetStartPoint(point0);
curve->SetEndPoint(point1);
ON_SumSurface sumSurf0;
sumSurf0.Create(*curve, *curve00);
if( context.m_doc.AddSurfaceObject(sumSurf0) )
{
context.m_doc.Redraw();
next_sn = CRhinoObject::NextRuntimeObjectSerialNumber();
if( first_sn == next_sn )
{
return CRhinoCommand::nothing;
}
else
{
SetNametoObject(context.m_doc,first_sn,obj_name,true);
}
}
}
}/*CLOSED FOR*/
//int R = 0;
//object_count = context.m_doc.LookupObject( layer, objects );
//for(int i = 0; i < object_count; i++)
//{
// object = objects[ i ];
// const CRhinoCurveObject* surface_obj = CRhinoCurveObject::Cast(object);
// if(surface_obj)
// {
// R++;
// }
//}
// // Get the string entered by the user
// ON_wString obj_name = gs.String();
// obj_name.TrimLeftAndRight();
//
// // Is name the same?
// if( obj_name.Compare(obj_attribs.m_name) == 0 )
//return CRhinoCommand::nothing;
//
// // Modify the attributes of the object
// obj_attribs.m_name = obj_name;
// context.m_doc.ModifyObjectAttributes( objref, obj_attribs );
// if(selectobjectbyuuid_s(context.m_doc,obj_Surf[j],false))
// {
//int R = 0;
// }
ON_wString obj_Surf[2];
ON_wString name;
obj_Surf[0] = L"SURFPV";
obj_Surf[1] = L"SURFFO";
object_count = context.m_doc.LookupObject( layer, objects );
int R = 0;
/************************/
/*TRY SPLITTING THE BREP*/
/************************/
for(int j = 0; j < 2; j++)
{
for(int i = 0; i < object_count; i++)
{
object = objects[ i ];
/*MAKE COPY OF OBJECT ATTRIBUTES. THIS OBJECTS*/
/*HOLDS AN OBJECT'S USER-DEFINED NAME.*/
ON_3dmObjectAttributes obj_attribs = object->Attributes();
name = object->Attributes().m_name;
surface_obj = CRhinoSurfaceObject::Cast( object );
if( surface_obj && !surface_obj->IsSolid())
{
ON_wString obj_SurfLoc = obj_Surf[j];
/*IS THE CUTTING SURFACE?*/
if( obj_SurfLoc.Compare(name) == 0 )
{
R++;
}
}/*CHIUSURA IF SUPERFICIE*/
}
// /************************/
// /*PICK THE BREP TO SPLIT*/
// /************************/
// CRhinoGetObject go;
// go.SetCommandPrompt( L"SELECT SOLID TO SPLIT" );
// go.SetGeometryFilter( CRhinoGetObject::polysrf_object );//CRhinoGetObject::surface_object | CRhinoGetObject::polysrf_object
// go.GetObjects( 1, 1 );
// if( go.CommandResult() != success )
// {
//return go.CommandResult();
// }
// else
// {
// RhinoMessageBox(L"CYLINDER IS SELECTED", PlugIn()->PlugInName(), MB_OK | MB_ICONEXCLAMATION );
// }
//
// const CRhinoObjRef& split_ref = go.Object(0);
//
// const CRhinoObject* split_object = split_ref.Object();
// if( !split_object )
// {
//return failure;
// }
//
// const ON_Brep* split = split_ref.Brep();
// if( !split )
// {
//return failure;
// }
// ON_SimpleArray<ON_Brep*> pieces;
// double tol = context.m_doc.AbsoluteTolerance();
// /***********************/
// /*PICK THE CUTTING BREP*/
// /***********************/
// go.SetCommandPrompt( L"SELECT CUTTING SURFACE OR POLYSUFACE" );
// go.SetGeometryFilter( CRhinoGetObject::surface_object | CRhinoGetObject::polysrf_object );
// go.EnablePreSelect( FALSE );
// go.EnableDeselectAllBeforePostSelect( FALSE );
// go.GetObjects( 1, 2 );
// if( go.CommandResult() != success )
// {
//return go.CommandResult();
// }
// const ON_Brep* cutter = go.Object(0).Brep();
// if( !cutter )
// {
//return failure;
// }
//
// if( !RhinoBrepSplit(*split, *cutter, tol, pieces) )
// {
//RhinoApp().Print( L"UNABLE TO SPLIT BREP.\n" );
// }
//
// int i, count = pieces.Count();
// if( count == 0 | count == 1 )
// {
//if( count == 1 )
//{
// delete pieces[0];
//}
//return nothing;
// }
//
// CRhinoObjectAttributes attrib = split_object->Attributes();
// attrib.m_uuid = ON_nil_uuid;
//
// const CRhinoObjectVisualAnalysisMode* vam_list = split_object->m_analysis_mode_list;
//
// for( i = 0; i < count; i++ )
// {
//CRhinoBrepObject* brep_object = new CRhinoBrepObject( attrib );
//if( brep_object )
//{
// brep_object->SetBrep( pieces[i] );
// if( context.m_doc.AddObject(brep_object) )
// {
// RhinoCopyAnalysisModes( vam_list, brep_object );
// }
// else
// {
// delete brep_object;
// }
//}
// }
//
// context.m_doc.DeleteObject( split_ref );
// context.m_doc.Redraw();
}
/*CREATE A NEW LAYER*/
ON_Layer layer;
int layer_index = 0;
ON_Color color = ON_Color(0, 0, 0);
ON_wString layer_name_FONDELLO = L"FONDELLO";
layer.SetLayerName( layer_name_FONDELLO );
layer.SetPlotColor(color.Green());
/*ADD THE LAYER TO THE LAYER TABLE*/
layer_index = context.m_doc.m_layer_table.AddLayer( layer );
ON_wString layer_name_MATRICE = L"MATRICE";
layer.SetLayerName( layer_name_MATRICE );
layer.SetColor(color.Red());
/*ADD THE LAYER TO THE LAYER TABLE*/
layer_index = context.m_doc.m_layer_table.AddLayer( layer );
ON_wString layer_name_FISSO = L"FISSO";
layer.SetLayerName( layer_name_FISSO );
layer.SetColor(color.Blue());
/*ADD THE LAYER TO THE LAYER TABLE*/
layer_index = context.m_doc.m_layer_table.AddLayer( layer );
context.m_doc.Redraw();
/*********************************************************/
}
}/*CLOSED IF OVER CHECKING BREP COUNT OBJECT*/
else
{
RhinoMessageBox(L"THERE IS ALREADY A CYLINDER OBJECT", PlugIn()->PlugInName(), MB_OK | MB_ICONEXCLAMATION );
}
}
/**********************************************************************/
return CRhinoCommand::success;
}