bool DIALOG_EXCHANGE_MODULE::changeAllFootprints()
{
MODULE* Module, * PtBack;
bool change = false;
int ShowErr = 3; // Post 3 error max.
if( m_parent->GetBoard()->m_Modules == NULL )
return false;
if( !IsOK( this, _( "Are you sure you want to change all footprints?" ) ) )
return false;
/* The change is done from the last module because the function
* change_1_Module () modifies the last module in the list
*
* note: for the first module in chain (the last here), Module->Back()
* points the board or is NULL
*/
Module = m_parent->GetBoard()->m_Modules.GetLast();
for( ; Module && ( Module->Type() == PCB_MODULE_T ); Module = PtBack )
{
PtBack = Module->Back();
if( change_1_Module( Module, Module->GetFPID(), ShowErr ) )
change = true;
else if( ShowErr )
ShowErr--;
}
return change;
}
int ROUTER_TOOL::mainLoop( PNS_ROUTER_MODE aMode )
{
PCB_EDIT_FRAME* frame = getEditFrame<PCB_EDIT_FRAME>();
BOARD* board = getModel<BOARD>();
// Deselect all items
m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
Activate();
m_router->SetMode ( aMode );
m_ctls->SetSnapping( true );
m_ctls->ShowCursor( true );
std::auto_ptr<ROUTER_TOOL_MENU> ctxMenu ( new ROUTER_TOOL_MENU( board, aMode ) );
SetContextMenu ( ctxMenu.get() );
// Main loop: keep receiving events
while( OPT_TOOL_EVENT evt = Wait() )
{
if( m_needsSync )
{
m_router->SyncWorld();
m_router->SetView( getView() );
m_needsSync = false;
}
if( evt->IsCancel() || evt->IsActivate() )
break; // Finish
else if( evt->Action() == TA_UNDO_REDO )
m_needsSync = true;
else if( evt->IsMotion() )
updateStartItem( *evt );
else if( evt->IsClick( BUT_LEFT ) || evt->IsAction( &ACT_NewTrack ) )
{
updateStartItem( *evt );
if( evt->Modifier( MD_CTRL ) )
performDragging();
else
performRouting();
}
else if( evt->IsAction( &ACT_Drag ) )
performDragging();
handleCommonEvents( *evt );
}
// Restore the default settings
m_ctls->SetAutoPan( false );
m_ctls->ShowCursor( false );
frame->SetToolID( ID_NO_TOOL_SELECTED, wxCURSOR_DEFAULT, wxEmptyString );
// Store routing settings till the next invocation
m_savedSettings = m_router->Settings();
m_savedSizes = m_router->Sizes();
return 0;
}
void ROUTER_TOOL::performDragging()
{
PCB_EDIT_FRAME* frame = getEditFrame<PCB_EDIT_FRAME>();
bool saveUndoBuffer = true;
VIEW_CONTROLS* ctls = getViewControls();
bool dragStarted = m_router->StartDragging( m_startSnapPoint, m_startItem );
if( !dragStarted )
return;
if( m_startItem && m_startItem->Net() >= 0 )
highlightNet( true, m_startItem->Net() );
ctls->ForceCursorPosition( false );
ctls->SetAutoPan( true );
while( OPT_TOOL_EVENT evt = Wait() )
{
if( evt->IsCancel() || evt->IsActivate() )
break;
else if( evt->Action() == TA_UNDO_REDO )
{
saveUndoBuffer = false;
break;
}
else if( evt->IsMotion() )
{
updateEndItem( *evt );
m_router->Move( m_endSnapPoint, m_endItem );
}
else if( evt->IsClick( BUT_LEFT ) )
{
if( m_router->FixRoute( m_endSnapPoint, m_endItem ) )
break;
}
handleCommonEvents( *evt );
}
if( m_router->RoutingInProgress() )
m_router->StopRouting();
if( saveUndoBuffer )
{
// Save the recent changes in the undo buffer
frame->SaveCopyInUndoList( m_router->GetUndoBuffer(), UR_UNSPECIFIED );
m_router->ClearUndoBuffer();
frame->OnModify();
}
else
{
// It was interrupted by TA_UNDO_REDO event, so we have to sync the world now
m_needsSync = true;
}
ctls->SetAutoPan( false );
ctls->ForceCursorPosition( false );
highlightNet( false );
}
void FOOTPRINT_VIEWER_FRAME::SelectCurrentFootprint( wxCommandEvent& event )
{
PCB_EDIT_FRAME* parent = (PCB_EDIT_FRAME*) GetParent();
wxString libname = m_libraryName + wxT( "." ) + LegacyFootprintLibPathExtension;
MODULE* oldmodule = GetBoard()->m_Modules;
MODULE* module = LoadModuleFromLibrary( libname, parent->FootprintLibs(),
false );
if( module )
{
module->SetPosition( wxPoint( 0, 0 ) );
// Only one footprint allowed: remove the previous footprint (if exists)
if( oldmodule )
{
GetBoard()->Remove( oldmodule );
delete oldmodule;
}
m_footprintName = FROM_UTF8( module->GetFPID().GetFootprintName().c_str() );
module->ClearFlags();
SetCurItem( NULL );
Zoom_Automatique( false );
m_canvas->Refresh();
Update3D_Frame();
m_footprintList->SetStringSelection( m_footprintName );
}
}
void DIALOG_EXCHANGE_MODULE::OnOkClick( wxCommandEvent& event )
{
m_selectionMode = m_Selection->GetSelection();
bool result = false;
switch( m_Selection->GetSelection() )
{
case 0:
result = changeCurrentFootprint();
break;
case 1:
result = changeSameFootprints( false );
break;
case 2:
result = changeSameFootprints( true );
break;
case 3:
result = changeAllFootprints();
break;
}
if( result )
{
if( m_parent->GetBoard()->IsElementVisible( RATSNEST_VISIBLE ) )
m_parent->Compile_Ratsnest( NULL, true );
m_parent->GetCanvas()->Refresh();
}
m_commit.Push( wxT( "Changed footprint" ) );
}
void FOOTPRINT_EDIT_FRAME::OnUpdateInsertModuleInBoard( wxUpdateUIEvent& aEvent )
{
PCB_EDIT_FRAME* frame = (PCB_EDIT_FRAME*) Kiway().Player( FRAME_PCB, false );
MODULE* module_in_edit = GetBoard()->m_Modules;
bool canInsert = frame && module_in_edit && !module_in_edit->GetLink();
// If the source was deleted, the module can inserted but not updated in the board.
if( frame && module_in_edit && module_in_edit->GetLink() ) // this is not a new module
{
BOARD* mainpcb = frame->GetBoard();
MODULE* source_module = mainpcb->m_Modules;
// search if the source module was not deleted:
for( ; source_module != NULL; source_module = source_module->Next() )
{
if( module_in_edit->GetLink() == source_module->GetTimeStamp() )
break;
}
canInsert = ( source_module == NULL );
}
aEvent.Enable( canInsert );
}
/// Redraws the zone outline when moving a corner according to the cursor position
void Show_Zone_Corner_Or_Outline_While_Move_Mouse( EDA_DRAW_PANEL* aPanel, wxDC* aDC,
const wxPoint& aPosition, bool aErase )
{
PCB_EDIT_FRAME* pcbframe = (PCB_EDIT_FRAME*) aPanel->GetParent();
ZONE_CONTAINER* zone = (ZONE_CONTAINER*) pcbframe->GetCurItem();
if( aErase ) // Undraw edge in old position
{
zone->Draw( aPanel, aDC, GR_XOR );
}
wxPoint pos = pcbframe->GetScreen()->GetCrossHairPosition();
if( zone->IsMoving() )
{
wxPoint offset;
offset = pos - s_CursorLastPosition;
zone->Move( offset );
s_CursorLastPosition = pos;
}
else if( zone->IsDragging() )
{
wxPoint offset;
offset = pos - s_CursorLastPosition;
zone->MoveEdge( offset );
s_CursorLastPosition = pos;
}
else
{
zone->m_Poly->MoveCorner( zone->m_CornerSelection, pos.x, pos.y );
}
zone->Draw( aPanel, aDC, GR_XOR );
}
bool DIALOG_TARGET_PROPERTIES::TransferDataFromWindow()
{
// Zero-size targets are hard to see/select.
if( !m_Size.Validate( Mils2iu( 1 ), INT_MAX ) )
return false;
BOARD_COMMIT commit( m_Parent );
commit.Modify( m_Target );
if( m_DC )
m_Target->Draw( m_Parent->GetCanvas(), m_DC, GR_XOR );
// Save old item in undo list, if is is not currently edited (will be later if so)
bool pushCommit = ( m_Target->GetFlags() == 0 );
if( m_Target->GetFlags() != 0 ) // other edit in progress (MOVE, NEW ..)
m_Target->SetFlags( IN_EDIT ); // set flag in edit to force
// undo/redo/abort proper operation
m_Target->SetWidth( m_Thickness.GetValue() );
m_Target->SetSize( m_Size.GetValue() );
m_Target->SetShape( m_TargetShape->GetSelection() ? 1 : 0 );
if( m_DC )
m_Target->Draw( m_Parent->GetCanvas(), m_DC, ( m_Target->IsMoving() ) ? GR_XOR : GR_OR );
if( pushCommit )
commit.Push( _( "Modified alignment target" ) );
return true;
}
/* Redraws the zone outlines when moving mouse
*/
static void Show_New_Edge_While_Move_Mouse( EDA_DRAW_PANEL* aPanel, wxDC* aDC,
const wxPoint& aPosition, bool aErase )
{
PCB_EDIT_FRAME* pcbframe = (PCB_EDIT_FRAME*) aPanel->GetParent();
wxPoint c_pos = pcbframe->GetScreen()->GetCrossHairPosition();
ZONE_CONTAINER* zone = pcbframe->GetBoard()->m_CurrentZoneContour;
if( !zone )
return;
int icorner = zone->GetNumCorners() - 1;
if( icorner < 1 )
return; // We must have 2 (or more) corners
if( aErase ) // Undraw edge in old position
{
zone->DrawWhileCreateOutline( aPanel, aDC );
}
// Redraw the current edge in its new position
if( pcbframe->GetZoneSettings().m_Zone_45_Only )
{
// calculate the new position as allowed
wxPoint StartPoint = zone->GetCornerPosition( icorner - 1 );
CalculateSegmentEndPoint( c_pos, StartPoint.x, StartPoint.y, &c_pos.x, &c_pos.y );
}
zone->SetCornerPosition( icorner, c_pos );
zone->DrawWhileCreateOutline( aPanel, aDC );
}
int ROUTER_TOOL::InlineDrag( const TOOL_EVENT& aEvent )
{
const BOARD_CONNECTED_ITEM* item = aEvent.Parameter<const BOARD_CONNECTED_ITEM*>();
PCB_EDIT_FRAME* frame = getEditFrame<PCB_EDIT_FRAME>();
VIEW_CONTROLS* ctls = getViewControls();
m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
Activate();
m_router->SyncWorld();
m_startItem = m_router->GetWorld()->FindItemByParent( item );
if( m_startItem && m_startItem->IsLocked() )
{
if( !IsOK( m_frame, _( "The item is locked. Do you want to continue?" ) ) )
return false;
}
VECTOR2I p0 = ctls->GetCursorPosition();
bool dragStarted = m_router->StartDragging( p0, m_startItem );
if( !dragStarted )
return 0;
ctls->ForceCursorPosition( false );
ctls->SetAutoPan( true );
frame->UndoRedoBlock( true );
while( OPT_TOOL_EVENT evt = Wait() )
{
if( evt->IsCancel() )
{
break;
}
else if( evt->IsMotion() || evt->IsDrag( BUT_LEFT ) )
{
updateEndItem( *evt );
m_router->Move( m_endSnapPoint, m_endItem );
}
else if( evt->IsMouseUp( BUT_LEFT ) || evt->IsClick( BUT_LEFT ) )
{
updateEndItem( *evt );
m_router->FixRoute( m_endSnapPoint, m_endItem );
break;
}
}
if( m_router->RoutingInProgress() )
m_router->StopRouting();
ctls->SetAutoPan( false );
ctls->ShowCursor( false );
frame->UndoRedoBlock( false );
return 0;
}
/* Updates the different parameters for the component being edited
*/
void TARGET_PROPERTIES_DIALOG_EDITOR::OnOkClick( wxCommandEvent& event )
{
if( m_DC )
m_Target->Draw( m_Parent->GetCanvas(), m_DC, GR_XOR );
// Save old item in undo list, if is is not currently edited (will be later if so)
if( m_Target->GetFlags() == 0 )
m_Parent->SaveCopyInUndoList( m_Target, UR_CHANGED );
if( m_Target->GetFlags() != 0 ) // other edition in progress (MOVE, NEW ..)
m_Target->SetFlags( IN_EDIT ); // set flag in edit to force
// undo/redo/abort proper operation
int tmp = ValueFromString( g_UserUnit, m_TargetThicknessCtrl->GetValue() );
m_Target->SetWidth( tmp );
MireDefaultSize = ValueFromString( g_UserUnit, m_TargetSizeCtrl->GetValue() );
m_Target->SetSize( MireDefaultSize );
m_Target->SetShape( m_TargetShape->GetSelection() ? 1 : 0 );
if( m_DC )
m_Target->Draw( m_Parent->GetCanvas(), m_DC, ( m_Target->IsMoving() ) ? GR_XOR : GR_OR );
m_Parent->OnModify();
EndModal( 1 );
}
/** Abort function for drag or move track
*/
static void Abort_MoveTrack( EDA_DRAW_PANEL* aPanel, wxDC* aDC )
{
PCB_EDIT_FRAME* frame = (PCB_EDIT_FRAME*) aPanel->GetParent();
BOARD * pcb = frame->GetBoard();
pcb->HighLightOFF();
pcb->PopHighLight();
frame->SetCurItem( NULL );
aPanel->SetMouseCapture( NULL, NULL );
// Undo move and redraw trace segments.
for( unsigned jj=0 ; jj < g_DragSegmentList.size(); jj++ )
{
TRACK* track = g_DragSegmentList[jj].m_Track;
g_DragSegmentList[jj].RestoreInitialValues();
track->SetState( IN_EDIT, false );
track->ClearFlags();
}
// Clear the undo picker list:
s_ItemsListPicker.ClearListAndDeleteItems();
EraseDragList();
aPanel->Refresh();
}
void DIALOG_DIMENSION_EDITOR::OnOKClick( wxCommandEvent& event )
{
if( m_DC ) // Delete old text.
{
CurrentDimension->Draw( m_Parent->GetCanvas(), m_DC, GR_XOR );
}
m_Parent->SaveCopyInUndoList(CurrentDimension, UR_CHANGED);
if( m_Name->GetValue() != wxEmptyString )
{
CurrentDimension->SetText( m_Name->GetValue() );
}
wxString msg;
// Get new size value:
msg = m_TxtSizeXCtrl->GetValue();
CurrentDimension->Text().SetWidth( ReturnValueFromString( g_UserUnit, msg ) );
msg = m_TxtSizeYCtrl->GetValue();
CurrentDimension->Text().SetHeight( ReturnValueFromString( g_UserUnit, msg ) );
// Get new position value:
// It will be copied later in dimension, because
msg = m_textCtrlPosX->GetValue();
wxPoint pos;
pos.x = ReturnValueFromString( g_UserUnit, msg );
msg = m_textCtrlPosY->GetValue();
pos.y = ReturnValueFromString( g_UserUnit, msg );
CurrentDimension->Text().SetTextPosition( pos );
// Get new line thickness value:
msg = m_TxtWidthCtrl->GetValue();
int width = ReturnValueFromString( g_UserUnit, msg );
int maxthickness = Clamp_Text_PenSize( width, CurrentDimension->Text().GetSize() );
if( width > maxthickness )
{
DisplayError( NULL,
_( "The text thickness is too large for the text size. It will be clamped") );
width = maxthickness;
}
CurrentDimension->SetWidth( width );
CurrentDimension->Text().SetThickness( width );
CurrentDimension->Text().SetMirrored( ( m_rbMirror->GetSelection() == 1 ) ? true : false );
CurrentDimension->SetLayer( m_SelLayerBox->GetLayerSelection() );
if( m_DC ) // Display new text
{
CurrentDimension->Draw( m_Parent->GetCanvas(), m_DC, GR_OR );
}
m_Parent->OnModify();
EndModal( 1 );
}
bool FOOTPRINT_EDIT_FRAME::Load_Module_From_BOARD( MODULE* aModule )
{
MODULE* newModule;
PCB_EDIT_FRAME* frame = (PCB_EDIT_FRAME*) Kiway().Player( FRAME_PCB, false );
if( frame == NULL ) // happens if no board editor opened
return false;
if( aModule == NULL )
{
if( ! frame->GetBoard() || ! frame->GetBoard()->m_Modules )
return false;
aModule = SelectFootprint( frame->GetBoard() );
}
if( aModule == NULL )
return false;
SetCurItem( NULL );
Clear_Pcb( false );
GetBoard()->m_Status_Pcb = 0;
newModule = new MODULE( *aModule );
newModule->SetParent( GetBoard() );
newModule->SetLink( aModule->GetTimeStamp() );
aModule = newModule;
GetBoard()->Add( newModule );
newModule->ClearFlags();
// Clear references to net info, because the footprint editor
// does know any thing about nets handled by the current edited board.
// Morever the main board can change or the net info relative to this main board
// can change while editing this footprint in the footprint editor
for( D_PAD* pad = newModule->Pads(); pad; pad = pad->Next() )
pad->SetNetCode( NETINFO_LIST::UNCONNECTED );
SetCrossHairPosition( wxPoint( 0, 0 ) );
PlaceModule( newModule, NULL );
// Put it on FRONT layer,
// because this is the default in ModEdit, and in libs
if( newModule->GetLayer() != LAYER_N_FRONT )
newModule->Flip( newModule->GetPosition() );
// Put it in orientation 0,
// because this is the default orientation in ModEdit, and in libs
Rotate_Module( NULL, newModule, 0, false );
GetScreen()->ClrModify();
Zoom_Automatique( false );
return true;
}
/* MacOSX: Needed for file association
* http://wiki.wxwidgets.org/WxMac-specific_topics
*/
void EDA_APP::MacOpenFile( const wxString& fileName )
{
wxFileName filename = fileName;
PCB_EDIT_FRAME* frame = ( (PCB_EDIT_FRAME*) GetTopWindow() );
if( !filename.FileExists() )
return;
frame->LoadOnePcbFile( fileName, false );
}
int PCBNEW_CONTROL::LayerNext( TOOL_EVENT& aEvent )
{
PCB_EDIT_FRAME* editFrame = getEditFrame<PCB_EDIT_FRAME>();
LAYER_NUM layer = editFrame->GetActiveLayer();
layer = ( layer + 1 ) % ( LAST_COPPER_LAYER + 1 );
assert( IsCopperLayer( layer ) );
editFrame->SwitchLayer( NULL, layer );
editFrame->GetGalCanvas()->SetFocus();
setTransitions();
return 0;
}
void DIALOG_PLOT::onRunDRC( wxCommandEvent& event )
{
PCB_EDIT_FRAME* parent = dynamic_cast<PCB_EDIT_FRAME*>( GetParent() );
if( parent )
{
// First close an existing dialog if open
// (low probability, but can happen)
parent->GetDrcController()->DestroyDRCDialog( wxID_OK );
// Open a new drc dialod, with the right parent frame, and in Modal Mode
parent->GetDrcController()->ShowDRCDialog( this );
}
}
TOOL_SETTINGS::TOOL_SETTINGS( TOOL_BASE* aTool )
{
m_tool = aTool;
if( !aTool )
{
m_config = NULL;
return;
}
// fixme: make independent of pcbnew (post-stable)
PCB_EDIT_FRAME* frame = aTool->getEditFrame<PCB_EDIT_FRAME>();
m_config = frame->GetSettings();
}
void DIALOG_GEN_MODULE_POSITION::OnOutputDirectoryBrowseClicked( wxCommandEvent& event )
{
// Build the absolute path of current output plot directory
// to preselect it when opening the dialog.
wxFileName fn( m_outputDirectoryName->GetValue() );
wxString path = Prj().AbsolutePath( m_outputDirectoryName->GetValue() );
wxDirDialog dirDialog( this, _( "Select Output Directory" ), path );
if( dirDialog.ShowModal() == wxID_CANCEL )
return;
wxFileName dirName = wxFileName::DirName( dirDialog.GetPath() );
wxMessageDialog dialog( this, _( "Use a relative path? "),
_( "Plot Output Directory" ),
wxYES_NO | wxICON_QUESTION | wxYES_DEFAULT );
if( dialog.ShowModal() == wxID_YES )
{
wxString boardFilePath = ( (wxFileName) m_parent->GetBoard()->GetFileName()).GetPath();
if( !dirName.MakeRelativeTo( boardFilePath ) )
wxMessageBox( _( "Cannot make path relative (target volume different from board file volume)!" ),
_( "Plot Output Directory" ), wxOK | wxICON_ERROR );
}
m_outputDirectoryName->SetValue( dirName.GetFullPath() );
}
bool DIALOG_SWAP_LAYERS::TransferDataToWindow()
{
LSET enabledCopperLayers = LSET::AllCuMask( m_parent->GetBoard()->GetCopperLayerCount() );
int row = 0;
for( size_t layer = 0; layer < PCB_LAYER_ID_COUNT; ++layer )
{
if( enabledCopperLayers.test( layer ) )
{
auto attr = new wxGridCellAttr;
attr->SetRenderer( new GRID_CELL_LAYER_RENDERER( m_parent ) );
attr->SetBackgroundColour( wxSystemSettings::GetColour( wxSYS_COLOUR_MENU ) );
attr->SetReadOnly();
m_grid->SetAttr( row, 0, attr );
attr = new wxGridCellAttr;
attr->SetRenderer( new GRID_CELL_LAYER_RENDERER( m_parent ) );
attr->SetEditor( new GRID_CELL_LAYER_SELECTOR( m_parent, LSET::AllNonCuMask() ) );
m_grid->SetAttr( row, 1, attr );
m_grid->GetTable()->SetValueAsLong( row, 0, (long) layer );
m_grid->GetTable()->SetValueAsLong( row, 1, (long) layer );
++row;
}
}
return true;
}
MICROWAVE_TOOL_INFO getMicrowaveItemCreator( PCB_EDIT_FRAME& frame, int aParam )
{
MICROWAVE_TOOL_INFO info;
switch( aParam )
{
case MWAVE_TOOL_SIMPLE_ID::GAP:
info.name = _( "Add Gap" );
info.toolId = ID_PCB_MUWAVE_TOOL_GAP_CMD;
info.creatorFunc = [&frame] () {
return std::unique_ptr<MODULE>( frame.Create_MuWaveComponent( 0 ) );
};
break;
case MWAVE_TOOL_SIMPLE_ID::STUB:
info.name = _( "Add Stub" );
info.toolId = ID_PCB_MUWAVE_TOOL_STUB_CMD;
info.creatorFunc = [&frame] () {
return std::unique_ptr<MODULE>( frame.Create_MuWaveComponent( 1 ) );
};
break;
case MWAVE_TOOL_SIMPLE_ID::STUB_ARC:
info.name = _( "Add Stub (Arc)" );
info.toolId = ID_PCB_MUWAVE_TOOL_STUB_ARC_CMD;
info.creatorFunc = [&frame] () {
return std::unique_ptr<MODULE>( frame.Create_MuWaveComponent( 2 ) );
};
break;
case MWAVE_TOOL_SIMPLE_ID::FUNCTION_SHAPE:
info.name = _( "Add Polynomial Shape" );
info.toolId = ID_PCB_MUWAVE_TOOL_FUNCTION_SHAPE_CMD;
info.creatorFunc = [&frame] () {
return std::unique_ptr<MODULE>( frame.Create_MuWavePolygonShape() );
};
break;
default:
// Avoid uninitilized value:
info.toolId = 0;
// info.name is already set to empty string
break;
};
return info;
}
/**
* Function Abort_Zone_Create_Outline
* cancels the Begin_Zone command if at least one EDGE_ZONE was created.
*/
static void Abort_Zone_Create_Outline( EDA_DRAW_PANEL* Panel, wxDC* DC )
{
PCB_EDIT_FRAME* pcbframe = (PCB_EDIT_FRAME*) Panel->GetParent();
ZONE_CONTAINER* zone = pcbframe->GetBoard()->m_CurrentZoneContour;
if( zone )
{
zone->DrawWhileCreateOutline( Panel, DC, GR_XOR );
zone->ClearFlags();
zone->RemoveAllContours();
}
pcbframe->SetCurItem( NULL );
s_AddCutoutToCurrentZone = false;
s_CurrentZone = NULL;
Panel->SetMouseCapture( NULL, NULL );
}
/* Function called to abort a track creation
*/
static void Abort_Create_Track( EDA_DRAW_PANEL* Panel, wxDC* DC )
{
PCB_EDIT_FRAME* frame = (PCB_EDIT_FRAME*) Panel->GetParent();
BOARD* pcb = frame->GetBoard();
TRACK* track = (TRACK*) frame->GetCurItem();
if( track && ( track->Type()==PCB_VIA_T || track->Type()==PCB_TRACE_T ) )
{
// Erase the current drawing
ShowNewTrackWhenMovingCursor( Panel, DC, wxDefaultPosition, false );
if( pcb->IsHighLightNetON() )
frame->HighLight( DC );
pcb->PopHighLight();
if( pcb->IsHighLightNetON() )
pcb->DrawHighLight( Panel, DC, pcb->GetHighLightNetCode() );
frame->ClearMsgPanel();
// Undo pending changes (mainly a lock point creation) and clear the
// undo picker list:
frame->PutDataInPreviousState( &s_ItemsListPicker, false, false );
s_ItemsListPicker.ClearListAndDeleteItems();
// Delete current (new) track
g_CurrentTrackList.DeleteAll();
}
frame->SetCurItem( NULL );
}
void DIALOG_PRINT_USING_PRINTER::SetPrintParameters( )
{
PCB_PLOT_PARAMS plot_opts = m_parent->GetPlotSettings();
s_Parameters.m_PrintMirror = m_Print_Mirror->GetValue();
s_Parameters.m_Print_Sheet_Ref = m_Print_Sheet_Ref->GetValue();
s_Parameters.m_Print_Black_and_White =
m_ModeColorOption->GetSelection() != 0;
s_Parameters.m_DrillShapeOpt =
(PRINT_PARAMETERS::DrillShapeOptT) m_Drill_Shape_Opt->GetSelection();
if( m_PagesOption )
s_Parameters.m_OptionPrintPage = m_PagesOption->GetSelection() != 0;
SetLayerSetFromListSelection();
int idx = m_ScaleOption->GetSelection();
s_Parameters.m_PrintScale = s_ScaleList[idx];
plot_opts.SetScale( s_Parameters.m_PrintScale );
if( m_FineAdjustXscaleOpt )
{
if( s_Parameters.m_XScaleAdjust > MAX_SCALE ||
s_Parameters.m_YScaleAdjust > MAX_SCALE )
DisplayInfoMessage( NULL, _( "Warning: Scale option set to a very large value" ) );
m_FineAdjustXscaleOpt->GetValue().ToDouble( &s_Parameters.m_XScaleAdjust );
}
if( m_FineAdjustYscaleOpt )
{
// Test for a reasonnable scale value
if( s_Parameters.m_XScaleAdjust < MIN_SCALE ||
s_Parameters.m_YScaleAdjust < MIN_SCALE )
DisplayInfoMessage( NULL, _( "Warning: Scale option set to a very small value" ) );
m_FineAdjustYscaleOpt->GetValue().ToDouble( &s_Parameters.m_YScaleAdjust );
}
plot_opts.SetFineScaleAdjustX( s_Parameters.m_XScaleAdjust );
plot_opts.SetFineScaleAdjustY( s_Parameters.m_YScaleAdjust );
m_parent->SetPlotSettings( plot_opts );
SetPenWidth();
}
// Displays the list of available footprints in library name and select a footprint.
void DIALOG_EXCHANGE_MODULE::BrowseAndSelectFootprint( wxCommandEvent& event )
{
wxString newname;
newname = m_parent->SelectFootprint( m_parent, wxEmptyString, wxEmptyString, wxEmptyString,
Prj().PcbFootprintLibs() );
if( newname != wxEmptyString )
m_NewFootprintFPID->SetValue( newname );
}
void FOOTPRINT_VIEWER_FRAME::DClickOnFootprintList( wxCommandEvent& event )
{
if( IsModal() )
{
// @todo(DICK)
ExportSelectedFootprint( event );
// Prevent the double click from being as a single mouse button release
// event in the parent window which would cause the part to be parked
// rather than staying in move mode.
// Remember the mouse button will be released in the parent window
// thus creating a mouse button release event which should be ignored
PCB_EDIT_FRAME* pcbframe = dynamic_cast<PCB_EDIT_FRAME*>( GetParent() );
// The parent may not be the board editor:
if( pcbframe )
{
pcbframe->SkipNextLeftButtonReleaseEvent();
}
}
}
/**
* Function Abort_Zone_Move_Corner_Or_Outlines
* cancels the Begin_Zone state if at least one EDGE_ZONE has been created.
*/
void Abort_Zone_Move_Corner_Or_Outlines( EDA_DRAW_PANEL* Panel, wxDC* DC )
{
PCB_EDIT_FRAME* pcbframe = (PCB_EDIT_FRAME*) Panel->GetParent();
ZONE_CONTAINER* zone = (ZONE_CONTAINER*) pcbframe->GetCurItem();
if( zone->IsMoving() )
{
wxPoint offset;
offset = s_CornerInitialPosition - s_CursorLastPosition;
zone->Move( offset );
}
else if( zone->IsDragging() )
{
wxPoint offset;
offset = s_CornerInitialPosition - s_CursorLastPosition;
zone->MoveEdge( offset );
}
else
{
if( s_CornerIsNew )
{
zone->m_Poly->DeleteCorner( zone->m_CornerSelection );
}
else
{
wxPoint pos = s_CornerInitialPosition;
zone->m_Poly->MoveCorner( zone->m_CornerSelection, pos.x, pos.y );
}
}
Panel->SetMouseCapture( NULL, NULL );
s_AuxiliaryList.ClearListAndDeleteItems();
s_PickedList. ClearListAndDeleteItems();
Panel->Refresh();
pcbframe->SetCurItem( NULL );
zone->ClearFlags();
s_AddCutoutToCurrentZone = false;
s_CurrentZone = NULL;
}
void DIALOG_EXCHANGE_MODULE::RebuildCmpList( wxCommandEvent& event )
{
wxFileName fn;
wxString msg;
// Build the .cmp file name from the board name
fn = m_parent->GetBoard()->GetFileName();
fn.SetExt( ComponentFileExtension );
if( RecreateCmpFile( m_parent->GetBoard(), fn.GetFullPath() ) )
{
msg.Printf( _( "File '%s' created\n" ),
GetChars( fn.GetFullPath() ) );
}
else
{
msg.Printf( _( "** Could not create file '%s' ***\n" ),
GetChars( fn.GetFullPath() ) );
}
m_WinMessages->AppendText( msg );
}
bool DIALOG_EXCHANGE_MODULE::change_1_Module( MODULE* aModule,
const LIB_ID& aNewFootprintFPID,
bool aShowError )
{
MODULE* newModule;
wxString line;
if( aModule == NULL )
return false;
wxBusyCursor dummy;
// Copy parameters from the old module.
LIB_ID oldFootprintFPID = aModule->GetFPID();
// Load module.
line.Printf( _( "Change footprint '%s' (from '%s') to '%s'" ),
GetChars( aModule->GetReference() ),
oldFootprintFPID.Format().c_str(),
aNewFootprintFPID.Format().c_str() );
m_WinMessages->AppendText( line );
newModule = m_parent->LoadFootprint( aNewFootprintFPID );
if( newModule == NULL ) // New module not found, redraw the old one.
{
m_WinMessages->AppendText( wxT( " No\n" ) );
return false;
}
m_parent->Exchange_Module( aModule, newModule, m_commit );
if( aModule == m_currentModule )
m_currentModule = newModule;
m_WinMessages->AppendText( wxT( " OK\n" ) );
return true;
}
void DIALOG_GRAPHIC_ITEM_PROPERTIES::OnLayerChoice( wxCommandEvent& event )
/*******************************************************************/
{
int thickness;
if( (m_LayerSelectionCtrl->GetCurrentSelection() + FIRST_NO_COPPER_LAYER) == EDGE_N )
thickness = m_brdSettings.m_EdgeSegmentWidth;
else
thickness = m_brdSettings.m_DrawSegmentWidth;
PutValueInLocalUnits( *m_DefaultThicknessCtrl, thickness,
m_parent->GetInternalUnits() );
}
