int EDIT_TOOL::Remove( const TOOL_EVENT& aEvent )
{
const SELECTION& selection = m_selectionTool->GetSelection();
if( !hoverSelection( selection ) )
return 0;
// Get a copy of the selected items set
PICKED_ITEMS_LIST selectedItems = selection.items;
PCB_BASE_FRAME* editFrame = getEditFrame<PCB_BASE_FRAME>();
// As we are about to remove items, they have to be removed from the selection first
m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
// Save them
for( unsigned int i = 0; i < selectedItems.GetCount(); ++i )
selectedItems.SetPickedItemStatus( UR_DELETED, i );
editFrame->OnModify();
editFrame->SaveCopyInUndoList( selectedItems, UR_DELETED );
// And now remove
for( unsigned int i = 0; i < selectedItems.GetCount(); ++i )
remove( static_cast<BOARD_ITEM*>( selectedItems.GetPickedItem( i ) ) );
getModel<BOARD>()->GetRatsnest()->Recalculate();
return 0;
}
void PCB_EDIT_FRAME::Block_Flip()
{
#define INVERT( pos ) (pos) = center.y - ( (pos) - center.y )
wxPoint memo;
wxPoint center; // Position of the axis for inversion of all elements
OnModify();
PICKED_ITEMS_LIST* itemsList = &GetScreen()->m_BlockLocate.GetItems();
itemsList->m_Status = UR_FLIPPED;
memo = GetCrossHairPosition();
center = GetScreen()->m_BlockLocate.Centre();
for( unsigned ii = 0; ii < itemsList->GetCount(); ii++ )
{
BOARD_ITEM* item = (BOARD_ITEM*) itemsList->GetPickedItem( ii );
wxASSERT( item );
itemsList->SetPickedItemStatus( UR_FLIPPED, ii );
item->Flip( center );
switch( item->Type() )
{
case PCB_MODULE_T:
item->ClearFlags();
m_Pcb->m_Status_Pcb = 0;
break;
// Move and rotate the track segments
case PCB_TRACE_T: // a track segment (segment on a copper layer)
case PCB_VIA_T: // a via (like track segment on a copper layer)
m_Pcb->m_Status_Pcb = 0;
break;
case PCB_ZONE_AREA_T:
case PCB_LINE_T:
case PCB_TEXT_T:
case PCB_TARGET_T:
case PCB_DIMENSION_T:
break;
// This item is not put in undo list
case PCB_ZONE_T: // SEG_ZONE items are now deprecated
itemsList->RemovePicker( ii );
ii--;
break;
default:
wxMessageBox( wxT( "PCB_EDIT_FRAME::Block_Flip( ) error: unexpected type" ) );
break;
}
}
SaveCopyInUndoList( *itemsList, UR_FLIPPED, center );
Compile_Ratsnest( NULL, true );
m_canvas->Refresh( true );
}
void PCB_EDIT_FRAME::Block_Delete()
{
OnModify();
SetCurItem( NULL );
PICKED_ITEMS_LIST* itemsList = &GetScreen()->m_BlockLocate.GetItems();
itemsList->m_Status = UR_DELETED;
// unlink items and clear flags
for( unsigned ii = 0; ii < itemsList->GetCount(); ii++ )
{
BOARD_ITEM* item = (BOARD_ITEM*) itemsList->GetPickedItem( ii );
itemsList->SetPickedItemStatus( UR_DELETED, ii );
GetBoard()->GetConnectivity()->Remove( item );
switch( item->Type() )
{
case PCB_MODULE_T:
{
MODULE* module = (MODULE*) item;
module->ClearFlags();
module->UnLink();
m_Pcb->m_Status_Pcb = 0;
}
break;
case PCB_ZONE_AREA_T: // a zone area
m_Pcb->Remove( item );
break;
case PCB_LINE_T: // a segment not on copper layers
case PCB_TEXT_T: // a text on a layer
case PCB_TRACE_T: // a track segment (segment on a copper layer)
case PCB_VIA_T: // a via (like track segment on a copper layer)
case PCB_DIMENSION_T: // a dimension (graphic item)
case PCB_TARGET_T: // a target (graphic item)
item->UnLink();
break;
// These items are deleted, but not put in undo list
case PCB_MARKER_T: // a marker used to show something
case PCB_ZONE_T: // SEG_ZONE items are now deprecated
item->UnLink();
itemsList->RemovePicker( ii );
ii--;
item->DeleteStructure();
break;
default:
wxMessageBox( wxT( "PCB_EDIT_FRAME::Block_Delete( ) error: unexpected type" ) );
break;
}
}
SaveCopyInUndoList( *itemsList, UR_DELETED );
Compile_Ratsnest( NULL, true );
m_canvas->Refresh( true );
}
void PCB_EDIT_FRAME::Block_Rotate()
{
wxPoint oldpos;
wxPoint centre; // rotation cent-re for the rotation transform
int rotAngle = 900; // rotation angle in 0.1 deg.
oldpos = GetScreen()->GetCrossHairPosition();
centre = GetScreen()->m_BlockLocate.Centre();
OnModify();
PICKED_ITEMS_LIST* itemsList = &GetScreen()->m_BlockLocate.m_ItemsSelection;
itemsList->m_Status = UR_ROTATED;
for( unsigned ii = 0; ii < itemsList->GetCount(); ii++ )
{
BOARD_ITEM* item = (BOARD_ITEM*) itemsList->GetPickedItem( ii );
wxASSERT( item );
itemsList->SetPickedItemStatus( UR_ROTATED, ii );
item->Rotate( centre, rotAngle );
switch( item->Type() )
{
case PCB_MODULE_T:
( (MODULE*) item )->ClearFlags();
m_Pcb->m_Status_Pcb = 0;
break;
/* Move and rotate the track segments */
case PCB_TRACE_T: // a track segment (segment on a copper layer)
case PCB_VIA_T: // a via (like track segment on a copper layer)
m_Pcb->m_Status_Pcb = 0;
break;
case PCB_ZONE_AREA_T:
case PCB_LINE_T:
case PCB_TEXT_T:
case PCB_TARGET_T:
case PCB_DIMENSION_T:
break;
// This item is not put in undo list
case PCB_ZONE_T: // SEG_ZONE items are now deprecated
itemsList->RemovePicker( ii );
ii--;
break;
default:
wxMessageBox( wxT( "PCB_EDIT_FRAME::Block_Rotate( ) error: unexpected type" ) );
break;
}
}
SaveCopyInUndoList( *itemsList, UR_ROTATED, centre );
Compile_Ratsnest( NULL, true );
m_canvas->Refresh( true );
}
void PCB_EDIT_FRAME::Block_Move()
{
OnModify();
wxPoint MoveVector = GetScreen()->m_BlockLocate.GetMoveVector();
PICKED_ITEMS_LIST* itemsList = &GetScreen()->m_BlockLocate.GetItems();
itemsList->m_Status = UR_MOVED;
for( unsigned ii = 0; ii < itemsList->GetCount(); ii++ )
{
BOARD_ITEM* item = (BOARD_ITEM*) itemsList->GetPickedItem( ii );
itemsList->SetPickedItemStatus( UR_MOVED, ii );
item->Move( MoveVector );
GetBoard()->GetConnectivity()->Update( item );
item->ClearFlags( IS_MOVED );
switch( item->Type() )
{
case PCB_MODULE_T:
m_Pcb->m_Status_Pcb = 0;
item->ClearFlags();
break;
// Move track segments
case PCB_TRACE_T: // a track segment (segment on a copper layer)
case PCB_VIA_T: // a via (like a track segment on a copper layer)
m_Pcb->m_Status_Pcb = 0;
break;
case PCB_ZONE_AREA_T:
case PCB_LINE_T:
case PCB_TEXT_T:
case PCB_TARGET_T:
case PCB_DIMENSION_T:
break;
// This item is not put in undo list
case PCB_ZONE_T: // SEG_ZONE items are now deprecated
itemsList->RemovePicker( ii );
ii--;
break;
default:
wxMessageBox( wxT( "PCB_EDIT_FRAME::Block_Move( ) error: unexpected type" ) );
break;
}
}
SaveCopyInUndoList( *itemsList, UR_MOVED, MoveVector );
Compile_Ratsnest( NULL, true );
m_canvas->Refresh( true );
}
void DuplicateItemsInList( SCH_SCREEN* screen, PICKED_ITEMS_LIST& aItemsList,
const wxPoint& aMoveVector )
{
SCH_ITEM* newitem;
if( aItemsList.GetCount() == 0 )
return;
for( unsigned ii = 0; ii < aItemsList.GetCount(); ii++ )
{
newitem = DuplicateStruct( (SCH_ITEM*) aItemsList.GetPickedItem( ii ) );
aItemsList.SetPickedItem( newitem, ii );
aItemsList.SetPickedItemStatus( UR_NEW, ii );
{
switch( newitem->Type() )
{
case SCH_JUNCTION_T:
case SCH_LINE_T:
case SCH_BUS_BUS_ENTRY_T:
case SCH_BUS_WIRE_ENTRY_T:
case SCH_TEXT_T:
case SCH_LABEL_T:
case SCH_GLOBAL_LABEL_T:
case SCH_HIERARCHICAL_LABEL_T:
case SCH_SHEET_PIN_T:
case SCH_MARKER_T:
case SCH_NO_CONNECT_T:
default:
break;
case SCH_SHEET_T:
{
SCH_SHEET* sheet = (SCH_SHEET*) newitem;
sheet->SetTimeStamp( GetNewTimeStamp() );
break;
}
case SCH_COMPONENT_T:
( (SCH_COMPONENT*) newitem )->SetTimeStamp( GetNewTimeStamp() );
( (SCH_COMPONENT*) newitem )->ClearAnnotation( NULL );
break;
}
SetSchItemParent( newitem, screen );
screen->Append( newitem );
}
}
MoveItemsInList( aItemsList, aMoveVector );
}
/**
* Function UpdateCopyOfZonesList
* check a pick list to remove zones identical to their copies
* and set the type of operation in picker (UR_DELETED, UR_CHANGED)
* if an item is deleted, the initial values are retrievered,
* because they can have changed in edition
* @param aPickList = the main pick list
* @param aAuxiliaryList = the list of deleted or added (new created) items after calculations
* @param aPcb = the Board
*
* aAuxiliaryList is a list of pickers updated by zone algorithms:
* This list contains zones which were added or deleted during the zones combine process
* aPickList :is a list of zones that can be modified (changed or deleted, or not modified)
* Typically, this is the list of existing zones on the layer of the edited zone,
* before any change.
* >> if the picked zone is not changed, it is removed from list
* >> if the picked zone was deleted (i.e. not found in board list), the picker is modified:
* its status becomes UR_DELETED
* the aAuxiliaryList corresponding picker is removed (if not found : set an error)
* >> if the picked zone was flagged as UR_NEW, and was after deleted ,
* perhaps combined with an other zone (i.e. not found in board list):
* the picker is removed
* the zone itself if really deleted
* the aAuxiliaryList corresponding picker is removed (if not found : set an error)
* After aPickList is cleaned, the aAuxiliaryList is read
* All pickers flagged UR_NEW are moved to aPickList
* (the corresponding zones are zone that were created by the zone normalize and combine process,
* mainly when adding cutout areas, or creating self intersecting contours)
* All pickers flagged UR_DELETED are removed, and the coresponding zones actually deleted
* (the corresponding zones are new zone that were created by the zone normalize process,
* when creating self intersecting contours, and after combined with an existing zone.
* At the end of the update process the aAuxiliaryList must be void,
* because all pickers created by the combine process
* must have been removed (removed for new and deleted zones, or moved in aPickList.)
* If not an error is set.
*/
void UpdateCopyOfZonesList( PICKED_ITEMS_LIST& aPickList,
PICKED_ITEMS_LIST& aAuxiliaryList,
BOARD* aPcb )
{
for( unsigned kk = 0; kk < aPickList.GetCount(); kk++ )
{
UNDO_REDO_T status = aPickList.GetPickedItemStatus( kk );
ZONE_CONTAINER* ref = (ZONE_CONTAINER*) aPickList.GetPickedItem( kk );
for( unsigned ii = 0; ; ii++ ) // analyse the main picked list
{
ZONE_CONTAINER* zone = aPcb->GetArea( ii );
if( zone == NULL )
{
/* End of list: the stored item is not found:
* it must be in aDeletedList:
* search it and restore initial values
* or
* if flagged UR_NEW: remove it definitively
*/
if( status == UR_NEW )
{
delete ref;
ref = NULL;
aPickList.RemovePicker( kk );
kk--;
}
else
{
ZONE_CONTAINER* zcopy = (ZONE_CONTAINER*) aPickList.GetPickedItemLink( kk );
aPickList.SetPickedItemStatus( UR_DELETED, kk );
wxASSERT_MSG( zcopy != NULL,
wxT( "UpdateCopyOfZonesList() error: link = NULL" ) );
ref->Copy( zcopy );
// the copy was deleted; the link does not exists now.
aPickList.SetPickedItemLink( NULL, kk );
delete zcopy;
}
// Remove this item from aAuxiliaryList, mainly for tests purpose
bool notfound = true;
for( unsigned nn = 0; nn < aAuxiliaryList.GetCount(); nn++ )
{
if( ref != NULL && aAuxiliaryList.GetPickedItem( nn ) == ref )
{
aAuxiliaryList.RemovePicker( nn );
notfound = false;
break;
}
}
wxASSERT_MSG( notfound != true,
wxT( "UpdateCopyOfZonesList() error: item not found in "
"aAuxiliaryList" ) );
break;
}
if( zone == ref ) // picked zone found
{
if( aPickList.GetPickedItemStatus( kk ) != UR_NEW )
{
ZONE_CONTAINER* zcopy = (ZONE_CONTAINER*) aPickList.GetPickedItemLink( kk );
if( zone->IsSame( *zcopy ) ) // Remove picked, because no changes
{
delete zcopy; // Delete copy
aPickList.RemovePicker( kk );
kk--;
}
}
break;
}
}
}
// Add new zones in main pick list, and remove pickers from Auxiliary List
for( unsigned ii = 0; ii < aAuxiliaryList.GetCount(); )
{
if( aAuxiliaryList.GetPickedItemStatus( ii ) == UR_NEW )
{
ITEM_PICKER picker = aAuxiliaryList.GetItemWrapper( ii );
aPickList.PushItem( picker );
aAuxiliaryList.RemovePicker( ii );
}
else if( aAuxiliaryList.GetPickedItemStatus( ii ) == UR_DELETED )
{
delete aAuxiliaryList.GetPickedItemLink( ii );
aAuxiliaryList.RemovePicker( ii );
}
else
ii++;
}
// Should not occur:
wxASSERT_MSG( aAuxiliaryList.GetCount() == 0,
wxT( "UpdateCopyOfZonesList() error: aAuxiliaryList not empty." ) );
}
void SCH_EDIT_FRAME::SaveCopyInUndoList( PICKED_ITEMS_LIST& aItemsList,
UNDO_REDO_T aTypeCommand,
const wxPoint& aTransformPoint )
{
PICKED_ITEMS_LIST* commandToUndo = new PICKED_ITEMS_LIST();
commandToUndo->m_TransformPoint = aTransformPoint;
commandToUndo->m_Status = aTypeCommand;
// Copy picker list:
commandToUndo->CopyList( aItemsList );
// Verify list, and creates data if needed
for( unsigned ii = 0; ii < commandToUndo->GetCount(); ii++ )
{
SCH_ITEM* item = (SCH_ITEM*) commandToUndo->GetPickedItem( ii );
wxASSERT( item );
UNDO_REDO_T command = commandToUndo->GetPickedItemStatus( ii );
if( command == UR_UNSPECIFIED )
{
command = aTypeCommand;
commandToUndo->SetPickedItemStatus( command, ii );
}
switch( command )
{
case UR_CHANGED: /* Create a copy of item */
/* If needed, create a copy of item, and put in undo list
* in the picker, as link
* If this link is not null, the copy is already done
*/
if( commandToUndo->GetPickedItemLink( ii ) == NULL )
commandToUndo->SetPickedItemLink( DuplicateStruct( item, true ), ii );
wxASSERT( commandToUndo->GetPickedItemLink( ii ) );
break;
case UR_MOVED:
case UR_MIRRORED_Y:
case UR_MIRRORED_X:
case UR_ROTATED:
case UR_NEW:
case UR_DELETED:
case UR_EXCHANGE_T:
case UR_WIRE_IMAGE:
break;
default:
wxFAIL_MSG( wxString::Format( wxT( "Unknown undo/redo command %d" ), command ) );
break;
}
}
if( commandToUndo->GetCount() || aTypeCommand == UR_WIRE_IMAGE )
{
/* Save the copy in undo list */
GetScreen()->PushCommandToUndoList( commandToUndo );
/* Clear redo list, because after new save there is no redo to do */
GetScreen()->ClearUndoORRedoList( GetScreen()->m_RedoList );
}
else // Should not occur
{
delete commandToUndo;
}
}
void PCB_BASE_EDIT_FRAME::SaveCopyInUndoList( const PICKED_ITEMS_LIST& aItemsList,
UNDO_REDO_T aTypeCommand, const wxPoint& aTransformPoint )
{
PICKED_ITEMS_LIST* commandToUndo = new PICKED_ITEMS_LIST();
commandToUndo->m_TransformPoint = aTransformPoint;
// First, filter unnecessary stuff from the list (i.e. for multiple pads / labels modified),
// take the first occurence of the module (we save copies of modules when one of its subitems
// is changed).
for( unsigned ii = 0; ii < aItemsList.GetCount(); ii++ )
{
ITEM_PICKER curr_picker = aItemsList.GetItemWrapper(ii);
BOARD_ITEM* item = (BOARD_ITEM*) aItemsList.GetPickedItem( ii );
// For items belonging to modules, we need to save state of the parent module
if( item->Type() == PCB_MODULE_TEXT_T || item->Type() == PCB_MODULE_EDGE_T
|| item->Type() == PCB_PAD_T )
{
// Item to be stored in the undo buffer is the parent module
item = item->GetParent();
wxASSERT( item && item->Type() == PCB_MODULE_T );
if( item == NULL )
continue;
// Check if the parent module has already been saved in another entry
bool found = false;
for( unsigned j = 0; j < commandToUndo->GetCount(); j++ )
{
if( commandToUndo->GetPickedItem( j ) == item && commandToUndo->GetPickedItemStatus( j ) == UR_CHANGED )
{
found = true;
break;
}
}
if( !found )
{
// Create a clean copy of the parent module
MODULE* orig = static_cast<MODULE*>( item );
MODULE* clone = new MODULE( *orig );
clone->SetParent( GetBoard() );
// Clear current flags (which can be temporary set by a current edit command)
for( EDA_ITEM* loc_item = clone->GraphicalItemsList(); loc_item;
loc_item = loc_item->Next() )
loc_item->ClearFlags();
for( D_PAD* pad = clone->PadsList(); pad; pad = pad->Next() )
pad->ClearFlags();
clone->Reference().ClearFlags();
clone->Value().ClearFlags();
ITEM_PICKER picker( item, UR_CHANGED );
picker.SetLink( clone );
commandToUndo->PushItem( picker );
orig->SetLastEditTime();
}
else
{
continue;
}
}
else
{
// Normal case: all other BOARD_ITEMs, are simply copied to the new list
commandToUndo->PushItem( curr_picker );
}
}
for( unsigned ii = 0; ii < commandToUndo->GetCount(); ii++ )
{
BOARD_ITEM* item = (BOARD_ITEM*) commandToUndo->GetPickedItem( ii );
UNDO_REDO_T command = commandToUndo->GetPickedItemStatus( ii );
if( command == UR_UNSPECIFIED )
{
command = aTypeCommand;
commandToUndo->SetPickedItemStatus( command, ii );
}
wxASSERT( item );
switch( command )
{
case UR_CHANGED:
case UR_DRILLORIGIN:
case UR_GRIDORIGIN:
/* If needed, create a copy of item, and put in undo list
* in the picker, as link
* If this link is not null, the copy is already done
*/
if( commandToUndo->GetPickedItemLink( ii ) == NULL )
{
EDA_ITEM* cloned = item->Clone();
commandToUndo->SetPickedItemLink( cloned, ii );
}
break;
case UR_MOVED:
case UR_ROTATED:
case UR_ROTATED_CLOCKWISE:
case UR_FLIPPED:
case UR_NEW:
case UR_DELETED:
break;
default:
{
wxLogDebug( wxT( "SaveCopyInUndoList() error (unknown code %X)" ), command );
}
break;
}
}
if( commandToUndo->GetCount() )
{
/* Save the copy in undo list */
GetScreen()->PushCommandToUndoList( commandToUndo );
/* Clear redo list, because after a new command one cannot redo a command */
GetScreen()->ClearUndoORRedoList( GetScreen()->m_RedoList );
}
else
{
// Should not occur
wxASSERT( false );
delete commandToUndo;
}
}
void PCB_EDIT_FRAME::SaveCopyInUndoList( const PICKED_ITEMS_LIST& aItemsList,
UNDO_REDO_T aTypeCommand,
const wxPoint& aTransformPoint )
{
PICKED_ITEMS_LIST* commandToUndo = new PICKED_ITEMS_LIST();
commandToUndo->m_TransformPoint = aTransformPoint;
// Copy picker list:
commandToUndo->CopyList( aItemsList );
// Verify list, and creates data if needed
for( unsigned ii = 0; ii < commandToUndo->GetCount(); ii++ )
{
BOARD_ITEM* item = (BOARD_ITEM*) commandToUndo->GetPickedItem( ii );
// For texts belonging to modules, we need to save state of the parent module
if( item->Type() == PCB_MODULE_TEXT_T )
{
item = item->GetParent();
wxASSERT( item->Type() == PCB_MODULE_T );
if( item == NULL )
continue;
commandToUndo->SetPickedItem( item, ii );
commandToUndo->SetPickedItemStatus( UR_CHANGED, ii );
}
UNDO_REDO_T command = commandToUndo->GetPickedItemStatus( ii );
if( command == UR_UNSPECIFIED )
{
command = aTypeCommand;
commandToUndo->SetPickedItemStatus( command, ii );
}
wxASSERT( item );
switch( command )
{
case UR_CHANGED:
/* If needed, create a copy of item, and put in undo list
* in the picker, as link
* If this link is not null, the copy is already done
*/
if( commandToUndo->GetPickedItemLink( ii ) == NULL )
commandToUndo->SetPickedItemLink( item->Clone(), ii );
break;
case UR_MOVED:
case UR_ROTATED:
case UR_ROTATED_CLOCKWISE:
case UR_FLIPPED:
case UR_NEW:
case UR_DELETED:
break;
default:
{
wxString msg;
msg.Printf( wxT( "SaveCopyInUndoList() error (unknown code %X)" ), command );
wxMessageBox( msg );
}
break;
}
}
if( commandToUndo->GetCount() )
{
/* Save the copy in undo list */
GetScreen()->PushCommandToUndoList( commandToUndo );
/* Clear redo list, because after a new command one cannot redo a command */
GetScreen()->ClearUndoORRedoList( GetScreen()->m_RedoList );
}
else // Should not occur
{
delete commandToUndo;
}
}
void PCB_EDIT_FRAME::SaveCopyInUndoList( const PICKED_ITEMS_LIST& aItemsList,
UNDO_REDO_T aTypeCommand,
const wxPoint& aTransformPoint )
{
PICKED_ITEMS_LIST* commandToUndo = new PICKED_ITEMS_LIST();
commandToUndo->m_TransformPoint = aTransformPoint;
// First, filter unnecessary stuff from the list (i.e. for multiple pads / labels modified),
// take the first occurence of the module.
for( unsigned ii = 0; ii < aItemsList.GetCount(); ii++ )
{
ITEM_PICKER picker = aItemsList.GetItemWrapper(ii);
BOARD_ITEM* item = (BOARD_ITEM*) aItemsList.GetPickedItem( ii );
// For texts belonging to modules, we need to save state of the parent module
if( item->Type() == PCB_MODULE_TEXT_T || item->Type() == PCB_PAD_T )
{
item = item->GetParent();
wxASSERT( item->Type() == PCB_MODULE_T );
if( item == NULL )
continue;
bool found = false;
for( unsigned j = 0; j < commandToUndo->GetCount(); j++ )
{
if( commandToUndo->GetPickedItem( j ) == item && commandToUndo->GetPickedItemStatus( j ) == UR_CHANGED )
{
found = true;
break;
}
}
if( !found )
commandToUndo->PushItem( ITEM_PICKER(item, UR_CHANGED ) );
else
continue;
} else {
commandToUndo->PushItem( picker );
}
}
for( unsigned ii = 0; ii < commandToUndo->GetCount(); ii++ )
{
BOARD_ITEM* item = (BOARD_ITEM*) commandToUndo->GetPickedItem( ii );
UNDO_REDO_T command = commandToUndo->GetPickedItemStatus( ii );
if( command == UR_UNSPECIFIED )
{
command = aTypeCommand;
commandToUndo->SetPickedItemStatus( command, ii );
}
wxASSERT( item );
switch( command )
{
case UR_CHANGED:
/* If needed, create a copy of item, and put in undo list
* in the picker, as link
* If this link is not null, the copy is already done
*/
if( commandToUndo->GetPickedItemLink( ii ) == NULL )
{
EDA_ITEM* cloned = item->Clone();
commandToUndo->SetPickedItemLink( cloned, ii );
}
break;
case UR_MOVED:
case UR_ROTATED:
case UR_ROTATED_CLOCKWISE:
case UR_FLIPPED:
case UR_NEW:
case UR_DELETED:
break;
default:
{
wxString msg;
msg.Printf( wxT( "SaveCopyInUndoList() error (unknown code %X)" ), command );
wxMessageBox( msg );
}
break;
}
}
if( commandToUndo->GetCount() )
{
/* Save the copy in undo list */
GetScreen()->PushCommandToUndoList( commandToUndo );
/* Clear redo list, because after a new command one cannot redo a command */
GetScreen()->ClearUndoORRedoList( GetScreen()->m_RedoList );
}
else // Should not occur
{
delete commandToUndo;
}
}
void PCB_EDIT_FRAME::Block_Rotate()
{
wxPoint centre; // rotation cent-re for the rotation transform
int rotAngle = m_rotationAngle; // rotation angle in 0.1 deg.
centre = GetScreen()->m_BlockLocate.Centre();
OnModify();
PICKED_ITEMS_LIST* itemsList = &GetScreen()->m_BlockLocate.GetItems();
itemsList->m_Status = UR_CHANGED;
for( unsigned ii = 0; ii < itemsList->GetCount(); ii++ )
{
BOARD_ITEM* item = (BOARD_ITEM*) itemsList->GetPickedItem( ii );
wxASSERT( item );
itemsList->SetPickedItemStatus( UR_CHANGED, ii );
switch( item->Type() )
{
case PCB_MODULE_T:
( (MODULE*) item )->ClearFlags();
m_Pcb->m_Status_Pcb = 0;
break;
// Move and rotate the track segments
case PCB_TRACE_T: // a track segment (segment on a copper layer)
case PCB_VIA_T: // a via (like track segment on a copper layer)
m_Pcb->m_Status_Pcb = 0;
break;
case PCB_ZONE_AREA_T:
case PCB_LINE_T:
case PCB_TEXT_T:
case PCB_TARGET_T:
case PCB_DIMENSION_T:
break;
// This item is not put in undo list
case PCB_ZONE_T: // SEG_ZONE items are now deprecated
itemsList->RemovePicker( ii );
ii--;
break;
default:
wxMessageBox( wxT( "PCB_EDIT_FRAME::Block_Rotate( ) error: unexpected type" ) );
break;
}
}
// Save all the block items in there current state before applying the rotation.
SaveCopyInUndoList( *itemsList, UR_CHANGED, centre );
// Now perform the rotation.
for( unsigned ii = 0; ii < itemsList->GetCount(); ii++ )
{
BOARD_ITEM* item = (BOARD_ITEM*) itemsList->GetPickedItem( ii );
wxASSERT( item );
item->Rotate( centre, rotAngle );
GetBoard()->GetConnectivity()->Update( item );
}
Compile_Ratsnest( NULL, true );
m_canvas->Refresh( true );
}