bool
PartitionMap::Check(off_t sessionSize) const
{
int32 partitionCount = CountPartitions();
// 1. check partition locations
for (int32 i = 0; i < partitionCount; i++) {
if (!PartitionAt(i)->CheckLocation(sessionSize))
return false;
}
// 2. check overlapping of partitions and location of partition tables
bool result = true;
Partition** byOffset = new(nothrow) Partition*[partitionCount];
off_t* tableOffsets = new(nothrow) off_t[partitionCount - 3];
if (byOffset && tableOffsets) {
// fill the arrays
int32 byOffsetCount = 0;
int32 tableOffsetCount = 1; // primary partition table
tableOffsets[0] = 0;
for (int32 i = 0; i < partitionCount; i++) {
Partition* partition = (Partition*)PartitionAt(i);
if (!partition->IsExtended())
byOffset[byOffsetCount++] = partition;
// add only logical partition partition table locations
if (i >= 4) {
tableOffsets[tableOffsetCount++]
= partition->PartitionTableOffset();
}
}
// sort the arrays
qsort(byOffset, byOffsetCount, sizeof(Partition*),
cmp_partition_offset);
qsort(tableOffsets, tableOffsetCount, sizeof(off_t), cmp_offset);
// check for overlappings
off_t nextOffset = 0;
for (int32 i = 0; i < byOffsetCount; i++) {
Partition* partition = byOffset[i];
if (partition->Offset() < nextOffset && i > 0) {
Partition* previousPartition = byOffset[i - 1];
off_t previousSize = previousPartition->Size()
- (nextOffset - partition->Offset());
TRACE(("intel: PartitionMap::Check(): "));
if (previousSize == 0) {
previousPartition->Unset();
TRACE(("partition offset hides previous partition."
" Removing previous partition from disk layout.\n"));
} else {
TRACE(("overlapping partitions! Setting partition %ld "
"size to %lld\n", i - 1, previousSize));
previousPartition->SetSize(previousSize);
}
}
nextOffset = partition->Offset() + partition->Size();
}
// check uniqueness of partition table offsets and whether they lie
// outside of the non-extended partitions
if (result) {
for (int32 i = 0; i < tableOffsetCount; i++) {
if (i > 0 && tableOffsets[i] == tableOffsets[i - 1]) {
TRACE(("intel: PartitionMap::Check(): same partition table "
"for different extended partitions!\n"));
result = false;
break;
} else if (is_inside_partitions(tableOffsets[i],
(const Partition**)byOffset, byOffsetCount)) {
TRACE(("intel: PartitionMap::Check(): a partition table "
"lies inside a non-extended partition!\n"));
result = false;
break;
}
}
}
} else
result = false; // no memory: assume failure
// cleanup
delete[] byOffset;
delete[] tableOffsets;
return result;
}
// main
int
main(int argc, const char *const *argv)
{
kArgc = argc;
kArgv = argv;
if (argc < 2)
print_usage_and_exit(true);
// parameters
const char **files = new const char*[argc];
int fileCount = 0;
bool dryRun = false;
off_t startOffset = 0;
// parse arguments
for (int argi = 1; argi < argc;) {
const char *arg = argv[argi++];
if (arg[0] == '-') {
if (strcmp(arg, "-h") == 0 || strcmp(arg, "--help") == 0) {
print_usage_and_exit(false);
} else if (strcmp(arg, "--dry-run") == 0) {
dryRun = true;
} else if (strcmp(arg, "-alert") == 0) {
// ignore
} else if (strcmp(arg, "-full") == 0) {
// ignore
} else if (strcmp(arg, "--start-offset") == 0) {
if (argi >= argc)
print_usage_and_exit(true);
startOffset = strtoll(argv[argi++], NULL, 0);
} else if (strcmp(arg, "-safe") == 0) {
fprintf(stderr, "Error: Sorry, BeOS R3 isn't supported!\n");
exit(1);
} else {
print_usage_and_exit(true);
}
} else {
files[fileCount++] = arg;
}
}
// we need at least one file
if (fileCount == 0)
print_usage_and_exit(true);
// read the boot code
uint8 *bootCodeData = NULL;
#ifndef __ANTARES__
bootCodeData = read_boot_code_data(argv[0]);
#else
image_info info;
if (find_own_image(&info) == B_OK)
bootCodeData = read_boot_code_data(info.name);
#endif
if (!bootCodeData) {
fprintf(stderr, "Error: Failed to read \n");
exit(1);
}
// iterate through the files and make them bootable
status_t error;
for (int i = 0; i < fileCount; i++) {
const char *fileName = files[i];
BEntry entry;
error = entry.SetTo(fileName, true);
if (error != B_OK) {
fprintf(stderr, "Error: Failed to open \"%s\": %s\n",
fileName, strerror(error));
exit(1);
}
// get stat to check the type of the file
struct stat st;
error = entry.GetStat(&st);
if (error != B_OK) {
fprintf(stderr, "Error: Failed to stat \"%s\": %s\n",
fileName, strerror(error));
exit(1);
}
bool noPartition = false;
int64 partitionOffset = 0;
fs_info info; // needs to be here (we use the device name later)
if (S_ISDIR(st.st_mode)) {
#if defined(__BEOS__) || defined(__ANTARES__)
// a directory: get the device
error = fs_stat_dev(st.st_dev, &info);
if (error != B_OK) {
fprintf(stderr, "Error: Failed to determine device for "
"\"%s\": %s\n", fileName, strerror(error));
exit(1);
}
fileName = info.device_name;
#else
(void)info;
fprintf(stderr, "Error: Specifying directories not supported "
"on this platform!\n");
exit(1);
#endif
} else if (S_ISREG(st.st_mode)) {
// a regular file: fine
noPartition = true;
} else if (S_ISCHR(st.st_mode)) {
// character special: a device or partition under BeOS
// or under FreeBSD
#if !(defined(__BEOS__) || defined(__ANTARES__)) && !defined(ANTARES_HOST_PLATFORM_FREEBSD)
fprintf(stderr, "Error: Character special devices not "
"supported on this platform.\n");
exit(1);
#endif
#ifdef ANTARES_HOST_PLATFORM_FREEBSD
// chop off the trailing number
int fileNameLen = strlen(fileName);
int baseNameLen = -1;
for (int k = fileNameLen - 1; k >= 0; k--) {
if (!isdigit(fileName[k])) {
baseNameLen = k + 1;
break;
}
}
// Remove de 's' from 'ad2s2' slice device (partition for DOS
// users) to get 'ad2' base device
baseNameLen--;
if (baseNameLen < 0) {
// only digits?
fprintf(stderr, "Error: Failed to get base device name.\n");
exit(1);
}
if (baseNameLen < fileNameLen) {
// get base device name and partition index
char baseDeviceName[B_PATH_NAME_LENGTH];
int partitionIndex = atoi(fileName + baseNameLen + 1);
// Don't forget the 's' of slice :)
memcpy(baseDeviceName, fileName, baseNameLen);
baseDeviceName[baseNameLen] = '\0';
// open base device
int baseFD = open(baseDeviceName, O_RDONLY);
if (baseFD < 0) {
fprintf(stderr, "Error: Failed to open \"%s\": %s\n",
baseDeviceName, strerror(errno));
exit(1);
}
// get device size
int64 deviceSize;
if (ioctl(baseFD, DIOCGMEDIASIZE, &deviceSize) == -1) {
fprintf(stderr, "Error: Failed to get device geometry "
"for \"%s\": %s\n", baseDeviceName,
strerror(errno));
exit(1);
}
// parse the partition map
// TODO: block size!
PartitionMapParser parser(baseFD, 0, deviceSize, 512);
PartitionMap map;
error = parser.Parse(NULL, &map);
if (error != B_OK) {
fprintf(stderr, "Error: Parsing partition table on "
"device \"%s\" failed: %s\n", baseDeviceName,
strerror(error));
exit(1);
}
close(baseFD);
// check the partition we are supposed to write at
Partition *partition = map.PartitionAt(partitionIndex - 1);
if (!partition || partition->IsEmpty()) {
fprintf(stderr, "Error: Invalid partition index %d.\n",
partitionIndex);
dump_partition_map(map);
exit(1);
}
if (partition->IsExtended()) {
fprintf(stderr, "Error: Partition %d is an extended "
"partition.\n", partitionIndex);
dump_partition_map(map);
exit(1);
}
partitionOffset = partition->Offset();
} else {
// The given device is the base device. We'll write at
// offset 0.
}
#endif // ANTARES_HOST_PLATFORM_FREEBSD
} else if (S_ISBLK(st.st_mode)) {
// block device: a device or partition under Linux or Darwin
#ifdef ANTARES_HOST_PLATFORM_LINUX
// chop off the trailing number
int fileNameLen = strlen(fileName);
int baseNameLen = -1;
for (int k = fileNameLen - 1; k >= 0; k--) {
if (!isdigit(fileName[k])) {
baseNameLen = k + 1;
break;
}
}
if (baseNameLen < 0) {
// only digits?
fprintf(stderr, "Error: Failed to get base device name.\n");
exit(1);
}
if (baseNameLen < fileNameLen) {
// get base device name and partition index
char baseDeviceName[B_PATH_NAME_LENGTH];
int partitionIndex = atoi(fileName + baseNameLen);
memcpy(baseDeviceName, fileName, baseNameLen);
baseDeviceName[baseNameLen] = '\0';
// open base device
int baseFD = open(baseDeviceName, O_RDONLY);
if (baseFD < 0) {
fprintf(stderr, "Error: Failed to open \"%s\": %s\n",
baseDeviceName, strerror(errno));
exit(1);
}
// get device size -- try BLKGETSIZE64, but, if it doesn't
// work, fall back to the obsolete HDIO_GETGEO
int64 deviceSize;
hd_geometry geometry;
if (ioctl(baseFD, BLKGETSIZE64, &deviceSize) == 0
&& deviceSize > 0) {
// looks good
} else if (ioctl(baseFD, HDIO_GETGEO, &geometry) == 0) {
deviceSize = (int64)geometry.heads * geometry.sectors
* geometry.cylinders * 512;
} else {
fprintf(stderr, "Error: Failed to get device geometry "
"for \"%s\": %s\n", baseDeviceName,
strerror(errno));
exit(1);
}
// parse the partition map
// TODO: block size!
PartitionMapParser parser(baseFD, 0, deviceSize, 512);
PartitionMap map;
error = parser.Parse(NULL, &map);
if (error != B_OK) {
fprintf(stderr, "Error: Parsing partition table on "
"device \"%s\" failed: %s\n", baseDeviceName,
strerror(error));
exit(1);
}
close(baseFD);
// check the partition we are supposed to write at
Partition *partition = map.PartitionAt(partitionIndex - 1);
if (!partition || partition->IsEmpty()) {
fprintf(stderr, "Error: Invalid partition index %d.\n",
partitionIndex);
dump_partition_map(map);
exit(1);
}
if (partition->IsExtended()) {
fprintf(stderr, "Error: Partition %d is an extended "
"partition.\n", partitionIndex);
dump_partition_map(map);
exit(1);
}
partitionOffset = partition->Offset();
} else {
// The given device is the base device. We'll write at
// offset 0.
}
#elif defined(ANTARES_HOST_PLATFORM_DARWIN)
// chop off the trailing number
int fileNameLen = strlen(fileName);
int baseNameLen = fileNameLen - 2;
// get base device name and partition index
char baseDeviceName[B_PATH_NAME_LENGTH];
int partitionIndex = atoi(fileName + baseNameLen + 1);
memcpy(baseDeviceName, fileName, baseNameLen);
baseDeviceName[baseNameLen] = '\0';
// open base device
int baseFD = open(baseDeviceName, O_RDONLY);
if (baseFD < 0) {
fprintf(stderr, "Error: Failed to open \"%s\": %s\n",
baseDeviceName, strerror(errno));
exit(1);
}
// get device size
int64 blockSize;
int64 blockCount;
int64 deviceSize;
if (ioctl(baseFD, DKIOCGETBLOCKSIZE, &blockSize) == -1) {
fprintf(stderr, "Error: Failed to get block size "
"for \"%s\": %s\n", baseDeviceName,
strerror(errno));
exit(1);
}
if (ioctl(baseFD, DKIOCGETBLOCKCOUNT, &blockCount) == -1) {
fprintf(stderr, "Error: Failed to get block count "
"for \"%s\": %s\n", baseDeviceName,
strerror(errno));
exit(1);
}
deviceSize = blockSize * blockCount;
// parse the partition map
PartitionMapParser parser(baseFD, 0, deviceSize, blockSize);
PartitionMap map;
error = parser.Parse(NULL, &map);
if (error != B_OK) {
fprintf(stderr, "Error: Parsing partition table on "
"device \"%s\" failed: %s\n", baseDeviceName,
strerror(error));
exit(1);
}
close(baseFD);
// check the partition we are supposed to write at
Partition *partition = map.PartitionAt(partitionIndex - 1);
if (!partition || partition->IsEmpty()) {
fprintf(stderr, "Error: Invalid partition index %d.\n",
partitionIndex);
dump_partition_map(map);
exit(1);
}
if (partition->IsExtended()) {
fprintf(stderr, "Error: Partition %d is an extended "
"partition.\n", partitionIndex);
dump_partition_map(map);
exit(1);
}
partitionOffset = partition->Offset();
#else
// partitions are block devices under Antares, but not under BeOS
#ifndef __ANTARES__
fprintf(stderr, "Error: Block devices not supported on this "
"platform!\n");
exit(1);
#endif // __ANTARES__
#endif
} else {
fprintf(stderr, "Error: File type of \"%s\" is not supported.\n",
fileName);
exit(1);
}
// open the file
int fd = open(fileName, O_RDWR);
if (fd < 0) {
fprintf(stderr, "Error: Failed to open \"%s\": %s\n", fileName,
strerror(errno));
exit(1);
}
#if (defined(__BEOS__) || defined(__ANTARES__))
// get a partition info
if (!noPartition
&& strlen(fileName) >= 3
&& strncmp("raw", fileName + strlen(fileName) - 3, 3)) {
partition_info partitionInfo;
if (ioctl(fd, B_GET_PARTITION_INFO, &partitionInfo,
sizeof(partitionInfo)) == 0) {
partitionOffset = partitionInfo.offset;
} else {
fprintf(stderr, "Error: Failed to get partition info: %s\n",
strerror(errno));
exit(1);
}
}
#endif // __BEOS__
// adjust the partition offset in the boot code data
// hard coded sector size: 512 bytes
*(uint32*)(bootCodeData + kPartitionOffsetOffset)
= B_HOST_TO_LENDIAN_INT32((uint32)(partitionOffset / 512));
// write the boot code
printf("Writing boot code to \"%s\" (partition offset: %" B_PRId64
" bytes, start offset = %" B_PRIdOFF ") "
"...\n", fileName, partitionOffset, startOffset);
write_boot_code_part(fileName, fd, startOffset, bootCodeData, 0,
kFirstBootCodePartSize, dryRun);
write_boot_code_part(fileName, fd, startOffset, bootCodeData,
kSecondBootCodePartOffset, kSecondBootCodePartSize,
dryRun);
#ifdef __ANTARES__
// check if this partition is mounted
BDiskDeviceRoster roster;
BPartition* partition;
BDiskDevice device;
status_t status = roster.GetPartitionForPath(fileName, &device,
&partition);
if (status != B_OK) {
status = roster.GetFileDeviceForPath(fileName, &device);
if (status == B_OK)
partition = &device;
}
if (status == B_OK && partition->IsMounted() && !dryRun) {
// This partition is mounted, we need to tell BFS to update its
// boot block (we are using part of the same logical block).
BPath path;
status = partition->GetMountPoint(&path);
if (status == B_OK) {
update_boot_block update;
update.offset = kSecondBootCodePartOffset - 512;
update.data = bootCodeData + kSecondBootCodePartOffset;
update.length = kSecondBootCodePartSize;
int mountFD = open(path.Path(), O_RDONLY);
if (ioctl(mountFD, BFS_IOCTL_UPDATE_BOOT_BLOCK, &update,
sizeof(update_boot_block)) != 0) {
fprintf(stderr, "Could not update BFS boot block: %s\n",
strerror(errno));
}
close(mountFD);
} else {
fprintf(stderr, "Could not update BFS boot code while the "
"partition is mounted!\n");
}
}
#endif // __ANTARES__
close(fd);
}
return 0;
}