void
TerrainTileModelFactory::addPatchLayers(TerrainTileModel* model,
const Map* map,
const TileKey& key,
const CreateTileModelFilter& filter,
ProgressCallback* progress)
{
OE_START_TIMER(fetch_patch_layers);
PatchLayerVector patchLayers;
map->getLayers(patchLayers);
for(PatchLayerVector::const_iterator i = patchLayers.begin();
i != patchLayers.end();
++i )
{
PatchLayer* layer = i->get();
if (!filter.accept(layer))
continue;
if (!layer->getEnabled())
continue;
if (layer->getAcceptCallback() == 0L || layer->getAcceptCallback()->acceptKey(key))
{
PatchLayer::TileData* tileData = layer->createTileData(key);
if (tileData)
{
TerrainTilePatchLayerModel* patchModel = new TerrainTilePatchLayerModel();
patchModel->setPatchLayer(layer);
patchModel->setTileData(tileData);
model->patchLayers().push_back(patchModel);
}
}
}
if (progress)
progress->stats()["fetch_patches_time"] += OE_STOP_TIMER(fetch_patch_layers);
}
void
TerrainCuller::apply(osg::Node& node)
{
// push the node's state.
osg::StateSet* node_state = node.getStateSet();
TileNode* tileNode = dynamic_cast<TileNode*>(&node);
if (tileNode)
{
_currentTileNode = tileNode;
_currentTileDrawCommands = 0u;
if (!_terrain.patchLayers().empty())
{
// todo: check for patch/virtual
const RenderBindings& bindings = _context->getRenderBindings();
TileRenderModel& renderModel = _currentTileNode->renderModel();
bool pushedMatrix = false;
for (PatchLayerVector::const_iterator i = _terrain.patchLayers().begin(); i != _terrain.patchLayers().end(); ++i)
{
PatchLayer* layer = i->get();
if (layer->getAcceptCallback() == 0L ||
layer->getAcceptCallback()->acceptKey(_currentTileNode->getKey()))
{
// Push this tile's matrix if we haven't already done so:
if (!pushedMatrix)
{
SurfaceNode* surface = tileNode->getSurfaceNode();
// push the surface matrix:
osg::Matrix mvm = *getModelViewMatrix();
surface->computeLocalToWorldMatrix(mvm, this);
pushModelViewMatrix(createOrReuseMatrix(mvm), surface->getReferenceFrame());
pushedMatrix = true;
}
// Add the draw command:
DrawTileCommand* cmd = addDrawCommand(layer->getUID(), &renderModel, 0L, tileNode);
if (cmd)
{
cmd->_drawPatch = true;
cmd->_drawCallback = layer->getDrawCallback();
++_currentTileDrawCommands;
}
}
}
if (pushedMatrix)
{
popModelViewMatrix();
}
}
}
else
{
SurfaceNode* surface = dynamic_cast<SurfaceNode*>(&node);
if (surface)
{
TileRenderModel& renderModel = _currentTileNode->renderModel();
// push the surface matrix:
osg::Matrix mvm = *getModelViewMatrix();
surface->computeLocalToWorldMatrix(mvm, this);
pushModelViewMatrix(createOrReuseMatrix(mvm), surface->getReferenceFrame());
// First go through any legit rendering pass data in the Tile and
// and add a DrawCommand for each.
for (unsigned p = 0; p < renderModel._passes.size(); ++p)
{
const RenderingPass& pass = renderModel._passes[p];
if (pass._layer.valid() && pass._layer->getRenderType() == Layer::RENDERTYPE_TILE)
{
if (addDrawCommand(pass._sourceUID, &renderModel, &pass, _currentTileNode))
{
++_currentTileDrawCommands;
}
}
}
// Next, add a DrawCommand for each tile layer not represented in the TerrainTileModel
// as a rendering pass.
for (LayerVector::const_iterator i = _terrain.tileLayers().begin(); i != _terrain.tileLayers().end(); ++i)
{
Layer* layer = i->get();
if (addDrawCommand(layer->getUID(), &renderModel, 0L, _currentTileNode))
{
++_currentTileDrawCommands;
}
}
// If the culler added no draw commands for this tile... do something!
if (_currentTileDrawCommands == 0)
{
//OE_INFO << LC << "Adding blank render.\n";
addDrawCommand(-1, &renderModel, 0L, _currentTileNode);
}
popModelViewMatrix();
_terrain._drawState->_bs.expandBy(surface->getBound());
_terrain._drawState->_box.expandBy(_terrain._drawState->_bs);
}
}
traverse(node);
}
void
TerrainRenderData::setup(const Map* map,
const RenderBindings& bindings,
unsigned frameNum,
osgUtil::CullVisitor* cv)
{
_bindings = &bindings;
// Create a new State object to track sampler and uniform settings
_drawState = new DrawState();
_drawState->_frame = frameNum;
_drawState->_bindings = &bindings;
// Is this a depth camera? Because if it is, we don't need any color layers.
const osg::Camera* cam = cv->getCurrentCamera();
bool isDepthCamera = ClampableNode::isDepthCamera(cam);
// Make a drawable for each rendering pass (i.e. each render-able map layer).
LayerVector layers;
map->getLayers(layers);
for (LayerVector::const_iterator i = layers.begin(); i != layers.end(); ++i)
{
Layer* layer = i->get();
if (layer->getEnabled())
{
bool render =
(layer->getRenderType() == Layer::RENDERTYPE_TERRAIN_SURFACE) || // && !isDepthCamera) ||
(layer->getRenderType() == Layer::RENDERTYPE_TERRAIN_PATCH);
if ( render )
{
// If this is an image layer, check the enabled/visible states.
VisibleLayer* visLayer = dynamic_cast<VisibleLayer*>(layer);
if (visLayer)
{
render = visLayer->getVisible();
}
if (render)
{
if (layer->getRenderType() == Layer::RENDERTYPE_TERRAIN_SURFACE)
{
LayerDrawable* ld = addLayerDrawable(layer);
// If the current camera is depth-only, leave this layer in the set
// but mark it as no-draw. We keep it in the set so the culler doesn't
// inadvertently think it's an orphaned layer.
if (isDepthCamera)
{
ld->_draw = false;
}
}
else // if (layer->getRenderType() == Layer::RENDERTYPE_TERRAIN_PATCH)
{
PatchLayer* patchLayer = static_cast<PatchLayer*>(layer); // asumption!
if (patchLayer->getAcceptCallback() != 0L &&
patchLayer->getAcceptCallback()->acceptLayer(*cv, cv->getCurrentCamera()))
{
patchLayers().push_back(dynamic_cast<PatchLayer*>(layer));
addLayerDrawable(layer);
}
}
}
}
}
}
// Include a "blank" layer for missing data.
LayerDrawable* blank = addLayerDrawable(0L);
}
void
TerrainRenderData::setup(const MapFrame& frame,
const RenderBindings& bindings,
unsigned frameNum,
osgUtil::CullVisitor* cv)
{
_bindings = &bindings;
// Create a new State object to track sampler and uniform settings
_drawState = new DrawState();
_drawState->_frame = frameNum;
_drawState->_bindings = &bindings;
// Make a drawable for each rendering pass (i.e. each render-able map layer).
for(LayerVector::const_iterator i = frame.layers().begin();
i != frame.layers().end();
++i)
{
Layer* layer = i->get();
if (layer->getEnabled())
{
if (layer->getRenderType() == Layer::RENDERTYPE_TILE ||
layer->getRenderType() == Layer::RENDERTYPE_PATCH)
{
bool render = true;
// If this is an image layer, check the enabled/visible states.
VisibleLayer* visLayer = dynamic_cast<VisibleLayer*>(layer);
if (visLayer)
{
render = visLayer->getVisible();
}
if (render)
{
ImageLayer* imgLayer = dynamic_cast<ImageLayer*>(layer);
// Make a list of "global" layers. There are layers whose data is not
// represented in the TerrainTileModel, like a splatting layer or a patch
// layer. The data for these is dynamic and not based on data fetched.
if (imgLayer == 0L && layer->getRenderType() == Layer::RENDERTYPE_TILE)
{
tileLayers().push_back(layer);
addLayerDrawable(layer);
}
else if (layer->getRenderType() == Layer::RENDERTYPE_PATCH)
{
PatchLayer* patchLayer = static_cast<PatchLayer*>(layer); // asumption!
if (patchLayer->getAcceptCallback() != 0L &&
patchLayer->getAcceptCallback()->acceptLayer(*cv, cv->getCurrentCamera()))
{
patchLayers().push_back(dynamic_cast<PatchLayer*>(layer));
addLayerDrawable(layer);
}
}
else
{
addLayerDrawable(layer);
}
}
}
}
}
// Include a "blank" layer for missing data.
LayerDrawable* blank = addLayerDrawable(0L);
blank->getOrCreateStateSet()->setDefine("OE_TERRAIN_RENDER_IMAGERY", osg::StateAttribute::OFF);
}
void
TerrainCuller::apply(osg::Node& node)
{
// push the node's state.
osg::StateSet* node_state = node.getStateSet();
TileNode* tileNode = dynamic_cast<TileNode*>(&node);
if (tileNode)
{
_currentTileNode = tileNode;
// reset the pointer to the first DrawTileCommand. We keep track of this so
// we can set it's "order" member to zero at the end, so the rendering engine
// knows to blend it with the terrain geometry color.
_firstTileDrawCommandForTile = 0L;
//_currentTileDrawCommands = 0u;
if (!_terrain.patchLayers().empty())
{
// todo: check for patch/virtual
const RenderBindings& bindings = _context->getRenderBindings();
TileRenderModel& renderModel = _currentTileNode->renderModel();
bool pushedMatrix = false;
for (PatchLayerVector::const_iterator i = _terrain.patchLayers().begin(); i != _terrain.patchLayers().end(); ++i)
{
PatchLayer* layer = i->get();
if (layer->getAcceptCallback() == 0L ||
layer->getAcceptCallback()->acceptKey(_currentTileNode->getKey()))
{
// Push this tile's matrix if we haven't already done so:
if (!pushedMatrix)
{
SurfaceNode* surface = tileNode->getSurfaceNode();
// push the surface matrix:
osg::Matrix mvm = *getModelViewMatrix();
surface->computeLocalToWorldMatrix(mvm, this);
pushModelViewMatrix(createOrReuseMatrix(mvm), surface->getReferenceFrame());
pushedMatrix = true;
}
// Add the draw command:
DrawTileCommand* cmd = addDrawCommand(layer->getUID(), &renderModel, 0L, tileNode);
if (cmd)
{
cmd->_drawPatch = true;
cmd->_drawCallback = layer->getDrawCallback();
}
}
}
if (pushedMatrix)
{
popModelViewMatrix();
}
}
}
else
{
SurfaceNode* surface = dynamic_cast<SurfaceNode*>(&node);
if (surface)
{
TileRenderModel& renderModel = _currentTileNode->renderModel();
// push the surface matrix:
osg::Matrix mvm = *getModelViewMatrix();
surface->computeLocalToWorldMatrix(mvm, this);
pushModelViewMatrix(createOrReuseMatrix(mvm), surface->getReferenceFrame());
int order = 0;
// First go through any legit rendering pass data in the Tile and
// and add a DrawCommand for each.
for (unsigned p = 0; p < renderModel._passes.size(); ++p)
{
const RenderingPass& pass = renderModel._passes[p];
DrawTileCommand* cmd = addDrawCommand(pass.sourceUID(), &renderModel, &pass, _currentTileNode);
if (cmd)
{
if (_firstTileDrawCommandForTile == 0L)
{
_firstTileDrawCommandForTile = cmd;
}
else if (cmd->_order < _firstTileDrawCommandForTile->_order)
{
//_firstTileDrawCommandForTile->_order = 1;
_firstTileDrawCommandForTile = cmd;
}
}
}
// If the culler added no draw commands for this tile... we still need
// to draw something or else there will be a hole! So draw a blank tile.
// UID = -1 is the special UID code for a blank.
if (_firstTileDrawCommandForTile == 0L)
{
//OE_INFO << LC << "Adding blank render for tile " << _currentTileNode->getKey().str() << std::endl;
DrawTileCommand* cmd = addDrawCommand(-1, &renderModel, 0L, _currentTileNode);
if (cmd)
cmd->_order = 0;
}
// Set the layer order of the first draw command for this tile to zero,
// to support proper terrain blending.
if (_firstTileDrawCommandForTile)
{
_firstTileDrawCommandForTile->_order = 0;
}
// pop the matrix from the cull stack
popModelViewMatrix();
// update our bounds
_terrain._drawState->_bs.expandBy(surface->getBound());
_terrain._drawState->_box.expandBy(_terrain._drawState->_bs);
}
}
// Handle any CullCallbacks and traverse.
osg::Callback* cullCallback = node.getCullCallback();
if (cullCallback) cullCallback->run(&node, this);
else traverse(node);
}
