void tst_QLlcpSocket::tst_waitFor()
{
    QFETCH(ClientConnectionShutdown, shutdown);

    QString service = QLatin1String("urn:nfc:sn:com.nokia.qtmobility.commandserver.stream");

    /* Construction */
    QLlcpSocket *socket = new QLlcpSocket;

    QCOMPARE(socket->state(), QLlcpSocket::UnconnectedState);

    /* Connection */
    socket->connectToService(0, service);
    QCOMPARE(socket->state(), QLlcpSocket::ConnectingState);
    QVERIFY(socket->waitForConnected());
    QCOMPARE(socket->state(), QLlcpSocket::ConnectedState);

    /* Verify connected to correct service */
    {
        socket->write("URI\n");
        QVERIFY(socket->waitForBytesWritten());

        QVERIFY(socket->waitForReadyRead());
        const QByteArray line = socket->readLine().trimmed();

        QCOMPARE(line, service.toLatin1());
    }

    /* Shutdown */
    switch (shutdown) {
    case ServerDisconnect:
        socket->write("DISCONNECT\n");
        break;
    case ServerClose:
        socket->write("CLOSE\n");
        break;
    case ClientDisconnect:
        socket->disconnectFromService();
        QCOMPARE(socket->state(), QLlcpSocket::ClosingState);
        break;
    case ClientClose:
        socket->close();
        QCOMPARE(socket->state(), QLlcpSocket::ClosingState);
        break;
    }

    QVERIFY(socket->waitForDisconnected());
    QVERIFY(!socket->isOpen());
    QCOMPARE(socket->state(), QLlcpSocket::UnconnectedState);

    if (shutdown == ServerDisconnect || shutdown == ServerClose)
        QCOMPARE(socket->error(), QLlcpSocket::RemoteHostClosedError);

    delete socket;
}
/*!
 Description: Add a llcp2 server which will always
 run( actually run twice ), then a client in a device connect,
 after the case finish, another device connect the
 server again.

 CounterPart: tst_qllcpsockettype2 echo:"0"
 run this case twice to test multiConnection()
*/
void tst_QLlcpServer::multiConnection()
{
    QString uri = TestUri;
    QString hint ="multiConnection test";

    QLlcpServer server;
    qDebug() << "Create QLlcpServer completed";
    qDebug() << "Start listening...";
    QSignalSpy connectionSpy(&server, SIGNAL(newConnection()));

    bool ret = server.listen(uri);
    QVERIFY(ret);
    qDebug() << "Listen() return ok";
    const int KLoopCount = 2;
    int loopCount = 0;
    while(loopCount < KLoopCount)
    {
        qDebug() << "#########Loop count = " << loopCount <<" #########";
        QNfcTestUtil::ShowAutoMsg(hint, &connectionSpy, 1);

        QTRY_VERIFY(!connectionSpy.isEmpty());
        qDebug() << "try to call nextPendingConnection()";
        QLlcpSocket *socket = server.nextPendingConnection();
        QVERIFY(socket != NULL);
        QSignalSpy readyReadSpy(socket, SIGNAL(readyRead()));
        QSignalSpy errorSpy(socket, SIGNAL(error(QLlcpSocket::SocketError)));

        //Get data from client
        QTRY_VERIFY(!readyReadSpy.isEmpty());

        qDebug() << "Bytes available = " << socket->bytesAvailable();
        quint16 blockSize = 0;
        QDataStream in(socket);
        in.setVersion(QDataStream::Qt_4_6);
        while (socket->bytesAvailable() < (int)sizeof(quint16)) {
            QSignalSpy readyRead(socket, SIGNAL(readyRead()));
            QTRY_VERIFY(!readyRead.isEmpty());
        }
        in >> blockSize;
        qDebug()<<"Read blockSize from client: " << blockSize;
        while (socket ->bytesAvailable() < blockSize) {
            QSignalSpy readyRead(socket, SIGNAL(readyRead()));
            QTRY_VERIFY(!readyRead.isEmpty());
        }
        QString echo;
        in >> echo;
        qDebug() << "Read data from client:" << echo;
        //Send data to client
        QSignalSpy bytesWrittenSpy(socket, SIGNAL(bytesWritten(qint64)));
        QByteArray block;
        QDataStream out(&block, QIODevice::WriteOnly);
        out.setVersion(QDataStream::Qt_4_6);
        out << (quint16)0;
        out << echo;
        qDebug()<<"Write echoed data back to client";
        out.device()->seek(0);
        out << (quint16)(block.size() - sizeof(quint16));
        qint64 val = socket->write(block);
        qDebug("Write() return value = %d", val);
        QVERIFY(val == 0);

        QTRY_VERIFY(!bytesWrittenSpy.isEmpty());
        qint64 written = countBytesWritten(bytesWrittenSpy);
        qDebug()<<"Server::bytesWritten signal return value = " << written;
        while (written < block.size())
        {
            QSignalSpy bytesWrittenSpy(socket, SIGNAL(bytesWritten(qint64)));
            QTRY_VERIFY(!bytesWrittenSpy.isEmpty());
            written += countBytesWritten(bytesWrittenSpy);
        }
        QVERIFY(written == block.size());
        //Now data has been sent,check the if existing error
        QVERIFY(errorSpy.isEmpty());

        connectionSpy.removeFirst();
        loopCount++;
    }
    QTest::qWait(1500);//give some time to client to finish
    server.close();
}
/*!
 Description: Unit test for NFC LLCP server sync(waitXXX) functions

 TestScenario: 1. Server will listen to a pre-defined URI
               2. Wait client to connect.
               3. Read message from client.
               4. Echo the same message back to client
               5. Wait client disconnect event.

 TestExpectedResults:
               1. The listen successfully set up.
               2. The message has be received from client.
               3. The echoed message has been sent to client.
               4. Connection disconnected and NO error signals emitted.
*/
void tst_QLlcpServer::newConnection_wait()
{
    QFETCH(QString, uri);
    QFETCH(QString, hint);

    QLlcpServer server;
    qDebug() << "Create QLlcpServer completed";
    qDebug() << "Start listening...";
    bool ret = server.listen(uri);
    QVERIFY(ret);
    qDebug() << "Listen() return ok";
    QSignalSpy connectionSpy(&server, SIGNAL(newConnection()));

    QNfcTestUtil::ShowAutoMsg(hint, &connectionSpy, 1);

    QTRY_VERIFY(!connectionSpy.isEmpty());
    qDebug() << "try to call nextPendingConnection()";
    QLlcpSocket *socket = server.nextPendingConnection();
    QVERIFY(socket != NULL);

    QSignalSpy errorSpy(socket, SIGNAL(error(QLlcpSocket::SocketError)));
    //Get data from client
    const int Timeout = 10 * 1000;

    quint16 blockSize = 0;
    QDataStream in(socket);
    in.setVersion(QDataStream::Qt_4_6);
    while (socket->bytesAvailable() < (int)sizeof(quint16)) {
        bool ret = socket->waitForReadyRead(Timeout);
        QVERIFY(ret);
    }

    in >> blockSize;
    qDebug()<<"Read blockSize from client: " << blockSize;
    while (socket ->bytesAvailable() < blockSize) {
        bool ret = socket->waitForReadyRead(Timeout);
        QVERIFY(ret);
    }
    QString echo;
    in >> echo;
    qDebug() << "Read data from client:" << echo;
    //Send data to client
    QSignalSpy bytesWrittenSpy(socket, SIGNAL(bytesWritten(qint64)));

    QByteArray block;
    QDataStream out(&block, QIODevice::WriteOnly);
    out.setVersion(QDataStream::Qt_4_6);
    out << (quint16)0;
    out << echo;
    qDebug()<<"Write echoed data back to client";
    out.device()->seek(0);
    out << (quint16)(block.size() - sizeof(quint16));

    qint64 val = socket->write(block);
    qDebug("Write() return value = %d", val);
    QVERIFY(val == 0);

    ret = socket->waitForBytesWritten(Timeout);
    QVERIFY(ret);

    QTRY_VERIFY(!bytesWrittenSpy.isEmpty());
    qint64 written = countBytesWritten(bytesWrittenSpy);

    while (written < block.size())
    {
        QSignalSpy bytesWrittenSpy(socket, SIGNAL(bytesWritten(qint64)));
        bool ret = socket->waitForBytesWritten(Timeout);
        QVERIFY(ret);
        QTRY_VERIFY(!bytesWrittenSpy.isEmpty());
        written += countBytesWritten(bytesWrittenSpy);
    }
    QVERIFY(written == block.size());
    //Now data has been sent,check the if existing error
    if (!errorSpy.isEmpty())
    {
        QLlcpSocket::SocketError error = errorSpy.first().at(0).value<QLlcpSocket::SocketError>();
        qDebug("QLlcpSocket::SocketError =%d", error);
    }
    QVERIFY(errorSpy.isEmpty());
    QTest::qWait(1500);//give some time to client to finish
    server.close();
}
void tst_QLlcpSocket::tst_clientConnection()
{
    QFETCH(ClientConnectionShutdown, shutdown);
    QFETCH(bool, stream);

    QString service = QLatin1String("urn:nfc:sn:com.nokia.qtmobility.commandserver") +
                      (stream ? QLatin1String(".stream") : QLatin1String(".datagram"));

    /* Construction */
    QLlcpSocket *socket = new QLlcpSocket;

    QSignalSpy stateSpy(socket, SIGNAL(stateChanged(QLlcpSocket::SocketState)));

    QCOMPARE(socket->state(), QLlcpSocket::UnconnectedState);

    /* Connection */
    QSignalSpy connectedSpy(socket, SIGNAL(connected()));
    QSignalSpy errorSpy(socket, SIGNAL(error(QLlcpSocket::SocketError)));

    socket->connectToService(0, service);

    QCOMPARE(stateSpy.count(), 1);
    QCOMPARE(stateSpy.takeFirst().at(0).value<QLlcpSocket::SocketState>(),
             QLlcpSocket::ConnectingState);
    QCOMPARE(socket->state(), QLlcpSocket::ConnectingState);

    stateSpy.clear();

    QTRY_VERIFY_TIMEOUT(30000, !connectedSpy.isEmpty() || !errorSpy.isEmpty());

    if (errorSpy.count() != 0) {
        qDebug() << errorSpy.takeFirst().at(0).toInt();
        QSKIP("Connection error", SkipSingle);
    }

    QCOMPARE(connectedSpy.count(), 1);
    QCOMPARE(stateSpy.count(), 1);
    QCOMPARE(stateSpy.takeFirst().at(0).value<QLlcpSocket::SocketState>(),
             QLlcpSocket::ConnectedState);
    QCOMPARE(socket->state(), QLlcpSocket::ConnectedState);

    stateSpy.clear();

    QSignalSpy bytesWrittenSpy(socket, SIGNAL(bytesWritten(qint64)));
    QSignalSpy readyReadSpy(socket, SIGNAL(readyRead()));

    /* Verify connected to correct service */
    if (stream) {
        socket->write("URI\n");

        QCOMPARE(bytesWrittenSpy.count(), 1);
        QCOMPARE(bytesWrittenSpy.takeFirst().at(0).value<qint64>(), qint64(4));

        QTRY_VERIFY(!readyReadSpy.isEmpty() && socket->canReadLine());

        const QByteArray line = socket->readLine().trimmed();

        QCOMPARE(line, service.toLatin1());
    } else {
        socket->writeDatagram("URI");

        QCOMPARE(bytesWrittenSpy.count(), 1);
        QCOMPARE(bytesWrittenSpy.takeFirst().at(0).value<qint64>(), qint64(3));

        QTRY_VERIFY(!readyReadSpy.isEmpty() && socket->hasPendingDatagrams());

        QByteArray datagram;
        datagram.resize(socket->pendingDatagramSize());

        socket->readDatagram(datagram.data(), datagram.size());

        QCOMPARE(datagram, service.toLatin1());
    }

    bytesWrittenSpy.clear();
    readyReadSpy.clear();

    /* Read / Write */
    if (stream) {
        QByteArray data("ECHO Test data\n");
        socket->write(data);

        QCOMPARE(bytesWrittenSpy.count(), 1);
        QCOMPARE(bytesWrittenSpy.takeFirst().at(0).value<qint64>(), qint64(data.size()));

        QTRY_VERIFY(!readyReadSpy.isEmpty());

        const QByteArray line = socket->readLine().trimmed();

        QCOMPARE(line.constData(), "Test data");
    } else {
        socket->writeDatagram("ECHO Test data");

        QCOMPARE(bytesWrittenSpy.count(), 1);
        QCOMPARE(bytesWrittenSpy.takeFirst().at(0).value<qint64>(), qint64(14));

        QTRY_VERIFY(!readyReadSpy.isEmpty());

        QByteArray datagram;
        datagram.resize(socket->pendingDatagramSize());

        socket->readDatagram(datagram.data(), datagram.size());

        QCOMPARE(datagram.constData(), "Test data");
    }

    bytesWrittenSpy.clear();
    readyReadSpy.clear();

    QSignalSpy disconnectedSpy(socket, SIGNAL(disconnected()));
    errorSpy.clear();

    /* Shutdown */
    switch (shutdown) {
    case ServerDisconnect:
        if (stream)
            socket->write("DISCONNECT\n");
        else
            socket->writeDatagram("DISCONNECT");
        break;
    case ServerClose:
        if (stream)
            socket->write("CLOSE\n");
        else
            socket->writeDatagram("CLOSE");
        break;
    case ClientDisconnect:
        socket->disconnectFromService();
        break;
    case ClientClose:
        socket->close();
        break;
    }

    QTRY_VERIFY(!disconnectedSpy.isEmpty());

    QCOMPARE(disconnectedSpy.count(), 1);
    QCOMPARE(stateSpy.count(), 2);
    QCOMPARE(stateSpy.takeFirst().at(0).value<QLlcpSocket::SocketState>(),
             QLlcpSocket::ClosingState);
    QCOMPARE(stateSpy.takeFirst().at(0).value<QLlcpSocket::SocketState>(),
             QLlcpSocket::UnconnectedState);
    QVERIFY(!socket->isOpen());

    if (shutdown == ServerDisconnect || shutdown == ServerClose) {
        QTRY_VERIFY(!errorSpy.isEmpty());

        QCOMPARE(errorSpy.count(), 1);
        QCOMPARE(errorSpy.takeFirst().at(0).value<QLlcpSocket::SocketError>(),
                 QLlcpSocket::RemoteHostClosedError);
        QCOMPARE(socket->error(), QLlcpSocket::RemoteHostClosedError);
    }

    delete socket;
}