void ShaderEffectItem::updateGeometry()
{
QRectF srcRect(0, 1, 1, -1);
if (m_mirrored)
srcRect = QRectF(0, 0, 1, 1);
QRectF dstRect = QRectF(0,0, width(), height());
int vmesh = m_meshResolution.height();
int hmesh = m_meshResolution.width();
QSGGeometry *g = &m_geometry;
if (vmesh == 1 && hmesh == 1) {
if (g->vertexCount() != 4)
g->allocate(4);
QSGGeometry::updateTexturedRectGeometry(g, dstRect, srcRect);
return;
}
g->allocate((vmesh + 1) * (hmesh + 1), vmesh * 2 * (hmesh + 2));
QSGGeometry::TexturedPoint2D *vdata = g->vertexDataAsTexturedPoint2D();
for (int iy = 0; iy <= vmesh; ++iy) {
float fy = iy / float(vmesh);
float y = float(dstRect.top()) + fy * float(dstRect.height());
float ty = float(srcRect.top()) + fy * float(srcRect.height());
for (int ix = 0; ix <= hmesh; ++ix) {
float fx = ix / float(hmesh);
vdata->x = float(dstRect.left()) + fx * float(dstRect.width());
vdata->y = y;
vdata->tx = float(srcRect.left()) + fx * float(srcRect.width());
vdata->ty = ty;
++vdata;
}
}
quint16 *indices = (quint16 *)g->indexDataAsUShort();
int i = 0;
for (int iy = 0; iy < vmesh; ++iy) {
*(indices++) = i + hmesh + 1;
for (int ix = 0; ix <= hmesh; ++ix, ++i) {
*(indices++) = i + hmesh + 1;
*(indices++) = i;
}
*(indices++) = i - 1;
}
}
/*
* The function hardcodes a fixed set of grid lines and scales
* those to the bounding rect.
*/
void GridNode::setRect(const QRectF &rect)
{
int vCount = int((rect.width() - 1) / GRID_SIZE);
int hCount = int((rect.height() - 1) / GRID_SIZE);
int lineCount = vCount + hCount;
QSGGeometry *g = geometry();
g->allocate(lineCount * 2);
float x = rect.x();
float y = rect.y();
float w = rect.width();
float h = rect.height();
QSGGeometry::Point2D *v = g->vertexDataAsPoint2D();
// Then write the vertical lines
for (int i=0; i<vCount; ++i) {
float dx = (i + 1) * GRID_SIZE;
v[i*2].set(dx, y);
v[i*2+1].set(dx, y + h);
}
v += vCount * 2;
// Then write the horizontal lines
for (int i=0; i<hCount; ++i) {
float dy = (i + 1) * GRID_SIZE;
v[i*2].set(x, dy);
v[i*2+1].set(x + w, dy);
}
// Tell the scenegraph we updated the geometry..
markDirty(QSGNode::DirtyGeometry);
}
QSGNode *PhosphorRender::updatePaintNode(QSGNode *oldNode, UpdatePaintNodeData *)
{
if (!m_ybuffer) {
return 0;
}
QSGGeometryNode *node = 0;
QSGGeometry *geometry = 0;
Material *material = 0;
unsigned n_points;
if (m_xbuffer) {
n_points = std::min(m_xbuffer->size(), m_ybuffer->size());
} else {
n_points = m_ybuffer->countPointsBetween(m_xmin, m_xmax);
}
n_points = std::min(n_points,(unsigned) 65767);
if (!oldNode) {
node = new QSGGeometryNode;
geometry = new QSGGeometry(QSGGeometry::defaultAttributes_Point2D(), n_points);
geometry->setDrawingMode(GL_POINTS);
node->setGeometry(geometry);
node->setFlag(QSGNode::OwnsGeometry);
material = new Material;
material->setFlag(QSGMaterial::Blending);
node->setMaterial(material);
node->setFlag(QSGNode::OwnsMaterial);
} else {
node = static_cast<QSGGeometryNode *>(oldNode);
geometry = node->geometry();
geometry->allocate(n_points);
geometry->setLineWidth(m_pointSize);
material = static_cast<Material*>(node->material());
}
QRectF bounds = boundingRect();
material->transformation.setToIdentity();
material->transformation.scale(bounds.width()/(m_xmax - m_xmin), bounds.height()/(m_ymin - m_ymax));
material->transformation.translate(-m_xmin, -m_ymax);
material->pointSize = m_pointSize;
material->color = m_color;
auto verticies = geometry->vertexDataAsPoint2D();
if (m_xbuffer) {
for (unsigned i=0; i<n_points; i++) {
verticies[i].set(m_xbuffer->get(i), m_ybuffer->get(i));
}
} else {
m_ybuffer->toVertexData(m_xmin, m_xmax, verticies, n_points);
}
node->markDirty(QSGNode::DirtyGeometry | QSGNode::DirtyMaterial);
return node;
}
/*------------------------------------------------------------------------------
| OMX_CameraSurfaceElement::updatePaintNode
+-----------------------------------------------------------------------------*/
QSGNode* OMX_CameraSurfaceElement::updatePaintNode(QSGNode* oldNode, UpdatePaintNodeData*)
{
QSGGeometryNode* node = 0;
QSGGeometry* geometry = 0;
if (!oldNode) {
// Create the node.
node = new QSGGeometryNode;
geometry = new QSGGeometry(QSGGeometry::defaultAttributes_TexturedPoint2D(), 4);
geometry->setDrawingMode(GL_TRIANGLE_STRIP);
node->setGeometry(geometry);
node->setFlag(QSGNode::OwnsGeometry);
// TODO: Who is freeing this?
// TODO: I cannot know the texture size here.
QSGOpaqueTextureMaterial* material = new QSGOpaqueTextureMaterial;
m_sgtexture = new OMX_SGTexture(0, QSize(640, 480));
material->setTexture(m_sgtexture);
node->setMaterial(material);
node->setFlag(QSGNode::OwnsMaterial);
QtConcurrent::run(this, &OMX_CameraSurfaceElement::videoAcquire);
}
else {
node = static_cast<QSGGeometryNode*>(oldNode);
geometry = node->geometry();
geometry->allocate(4);
// Update texture in the node if needed.
QSGOpaqueTextureMaterial* material = (QSGOpaqueTextureMaterial*)node->material();
QElapsedTimer timer;
timer.start();
QSGTexture* texture = window()->createTextureFromImage(m_frame);
LOG_VERBOSE(LOG_TAG, "Timer tex: %lld.", timer.elapsed());
material->setTexture(texture);
m_semAcquire.release();
#if 0
if (m_texture != (GLuint)material->texture()->textureId()) {
// TODO: Does setTextureId frees the prev texture?
// TODO: I should the given the texture size.
LOG_ERROR(LOG_TAG, "Updating texture to %u!", m_texture);
material = new QSGOpaqueTextureMaterial;
m_sgtexture->setTexture(m_texture, QSize(1920, 1080));
}
#endif
}
// Create the vertices and map to texture.
QRectF bounds = boundingRect();
QSGGeometry::TexturedPoint2D* vertices = geometry->vertexDataAsTexturedPoint2D();
vertices[0].set(bounds.x(), bounds.y() + bounds.height(), 0.0f, 0.0f);
vertices[1].set(bounds.x() + bounds.width(), bounds.y() + bounds.height(), 1.0f, 0.0f);
vertices[2].set(bounds.x(), bounds.y(), 0.0f, 1.0f);
vertices[3].set(bounds.x() + bounds.width(), bounds.y(), 1.0f, 1.0f);
return node;
}
QSGNode * QQuickLineItem::updatePaintNode(QSGNode *prev_node,
UpdatePaintNodeData *upd_data)
{
Q_UNUSED(upd_data);
QSGGeometryNode * node = static_cast<QSGGeometryNode*>(prev_node);
QSGGeometry * geometry = NULL;
QSGFlatColorMaterial * material = NULL;
if(!node) {
// http://qt-project.org/doc/qt-5/qsggeometrynode.html
node = new QSGGeometryNode;
geometry = new QSGGeometry(QSGGeometry::defaultAttributes_Point2D(),4);
geometry->setDrawingMode(GL_TRIANGLE_STRIP);
node->setGeometry(geometry);
node->setFlag(QSGNode::OwnsGeometry);
material = new QSGFlatColorMaterial;
material->setColor(m_color);
node->setMaterial(material);
node->setFlag(QSGNode::OwnsMaterial);
}
else {
geometry = node->geometry();
geometry->allocate(4); // we have to call allocate to invalidate
// the older vertex buffer
material = static_cast<QSGFlatColorMaterial*>(node->material());
}
// geometry
std::vector<QPointF> list_vx;
if(!calcTriStrip(list_vx)) {
list_vx.clear();
list_vx.push_back(QPointF(0,0));
list_vx.push_back(QPointF(0,0));
list_vx.push_back(QPointF(0,0));
list_vx.push_back(QPointF(0,0));
}
QSGGeometry::Point2D * vertices =
geometry->vertexDataAsPoint2D();
for(size_t i=0; i < list_vx.size(); i++) {
vertices[i].set(list_vx[i].x(),
list_vx[i].y());
}
node->markDirty(QSGNode::DirtyGeometry);
// material
material->setColor(m_color);
node->markDirty(QSGNode::DirtyMaterial);
return node;
}
void QQuickDefaultClipNode::updateGeometry()
{
QSGGeometry *g = geometry();
if (qFuzzyIsNull(m_radius)) {
g->allocate(4);
QSGGeometry::updateRectGeometry(g, m_rect);
} else {
int vertexCount = 0;
// Radius should never exceeds half of the width or half of the height
qreal radius = qMin(qMin(m_rect.width() / 2, m_rect.height() / 2), m_radius);
QRectF rect = m_rect;
rect.adjust(radius, radius, -radius, -radius);
int segments = qMin(30, qCeil(radius)); // Number of segments per corner.
g->allocate((segments + 1) * 2);
QVector2D *vertices = (QVector2D *)g->vertexData();
for (int part = 0; part < 2; ++part) {
for (int i = 0; i <= segments; ++i) {
//### Should change to calculate sin/cos only once.
qreal angle = qreal(0.5 * M_PI) * (part + i / qreal(segments));
qreal s = qFastSin(angle);
qreal c = qFastCos(angle);
qreal y = (part ? rect.bottom() : rect.top()) - radius * c; // current inner y-coordinate.
qreal lx = rect.left() - radius * s; // current inner left x-coordinate.
qreal rx = rect.right() + radius * s; // current inner right x-coordinate.
vertices[vertexCount++] = QVector2D(rx, y);
vertices[vertexCount++] = QVector2D(lx, y);
}
}
}
markDirty(DirtyGeometry);
setClipRect(m_rect);
}
//! [4]
QSGNode *BezierCurve::updatePaintNode(QSGNode *oldNode, UpdatePaintNodeData *)
{
QSGGeometryNode *node = 0;
QSGGeometry *geometry = 0;
if (!oldNode) {
node = new QSGGeometryNode;
//! [4] //! [5]
geometry = new QSGGeometry(QSGGeometry::defaultAttributes_Point2D(), m_segmentCount);
geometry->setLineWidth(2);
geometry->setDrawingMode(GL_LINE_STRIP);
node->setGeometry(geometry);
node->setFlag(QSGNode::OwnsGeometry);
//! [5] //! [6]
QSGFlatColorMaterial *material = new QSGFlatColorMaterial;
material->setColor(QColor(255, 0, 0));
node->setMaterial(material);
node->setFlag(QSGNode::OwnsMaterial);
//! [6] //! [7]
} else {
node = static_cast<QSGGeometryNode *>(oldNode);
geometry = node->geometry();
geometry->allocate(m_segmentCount);
}
//! [7]
//! [8]
QRectF bounds = boundingRect();
QSGGeometry::Point2D *vertices = geometry->vertexDataAsPoint2D();
for (int i = 0; i < m_segmentCount; ++i) {
qreal t = i / qreal(m_segmentCount - 1);
qreal invt = 1 - t;
QPointF pos = invt * invt * invt * m_p1
+ 3 * invt * invt * t * m_p2
+ 3 * invt * t * t * m_p3
+ t * t * t * m_p4;
float x = bounds.x() + pos.x() * bounds.width();
float y = bounds.y() + pos.y() * bounds.height();
vertices[i].set(x, y);
}
node->markDirty(QSGNode::DirtyGeometry);
//! [8]
//! [9]
return node;
}
void QQuickShapeGenericRenderer::updateStrokeNode(ShapePathData *d, QQuickShapeGenericNode *node)
{
if (!node->m_strokeNode)
return;
if (!(d->effectiveDirty & (DirtyStrokeGeom | DirtyColor)))
return;
QQuickShapeGenericStrokeFillNode *n = node->m_strokeNode;
QSGGeometry *g = n->geometry();
if (d->strokeVertices.isEmpty()) {
if (g->vertexCount() || g->indexCount()) {
g->allocate(0, 0);
n->markDirty(QSGNode::DirtyGeometry);
}
return;
}
n->markDirty(QSGNode::DirtyGeometry);
// Async loading runs update once, bails out above, then updates again once
// ready. Set the material dirty then. This is in-line with fill where the
// first activateMaterial() achieves the same.
if (!g->vertexCount())
n->markDirty(QSGNode::DirtyMaterial);
if ((d->effectiveDirty & DirtyColor) && !(d->effectiveDirty & DirtyStrokeGeom)) {
ColoredVertex *vdst = reinterpret_cast<ColoredVertex *>(g->vertexData());
for (int i = 0; i < g->vertexCount(); ++i)
vdst[i].set(vdst[i].x, vdst[i].y, d->strokeColor);
return;
}
g->allocate(d->strokeVertices.count(), 0);
g->setDrawingMode(QSGGeometry::DrawTriangleStrip);
memcpy(g->vertexData(), d->strokeVertices.constData(), g->vertexCount() * g->sizeOfVertex());
}
void QQuickAndroid9PatchNode::initialize(QSGTexture *texture, const QRectF &bounds, const QSize &sourceSize,
const QQuickAndroid9PatchDivs &xDivs, const QQuickAndroid9PatchDivs &yDivs)
{
delete m_material.texture();
m_material.setTexture(texture);
const int xlen = xDivs.data.size();
const int ylen = yDivs.data.size();
if (xlen > 0 && ylen > 0) {
const int quads = (xlen - 1) * (ylen - 1);
static const int verticesPerQuad = 6;
m_geometry.allocate(xlen * ylen, verticesPerQuad * quads);
QSGGeometry::TexturedPoint2D *vertices = m_geometry.vertexDataAsTexturedPoint2D();
QVector<qreal> xCoords = xDivs.coordsForSize(bounds.width());
QVector<qreal> yCoords = yDivs.coordsForSize(bounds.height());
for (int y = 0; y < ylen; ++y) {
for (int x = 0; x < xlen; ++x, ++vertices)
vertices->set(xCoords[x], yCoords[y], xDivs.data[x] / sourceSize.width(),
yDivs.data[y] / sourceSize.height());
}
quint16 *indices = m_geometry.indexDataAsUShort();
int n = quads;
for (int q = 0; n--; ++q) {
if ((q + 1) % xlen == 0) // next row
++q;
// Bottom-left half quad triangle
indices[0] = q;
indices[1] = q + xlen;
indices[2] = q + xlen + 1;
// Top-right half quad triangle
indices[3] = q;
indices[4] = q + xlen + 1;
indices[5] = q + 1;
indices += verticesPerQuad;
}
}
markDirty(QSGNode::DirtyGeometry | QSGNode::DirtyMaterial);
}
QSGNode *QPScrollingCurve::updatePaintNode(QSGNode *oldNode, QQuickItem::UpdatePaintNodeData *)
{
QSGGeometryNode *node = 0;
QSGGeometry *geometry = 0;
QSGFlatColorMaterial *material = 0;
if (!oldNode) {
node = new QSGGeometryNode;
geometry = new QSGGeometry(QSGGeometry::defaultAttributes_Point2D(), m_data.size());
geometry->setLineWidth(2);
geometry->setDrawingMode(GL_LINE_STRIP);
node->setGeometry(geometry);
node->setFlag(QSGNode::OwnsGeometry);
material = new QSGFlatColorMaterial;
material->setColor(m_color);
node->setMaterial(material);
node->setFlag(QSGNode::OwnsMaterial);
node->markDirty(QSGNode::DirtyMaterial);
} else {
node = static_cast<QSGGeometryNode *>(oldNode);
geometry = node->geometry();
geometry->allocate(m_data.size());
material = static_cast<QSGFlatColorMaterial*>(node->material());
if (material->color() != m_color) {
material->setColor(m_color);
node->markDirty(QSGNode::DirtyMaterial);
}
}
QSGGeometry::Point2D *vertices = geometry->vertexDataAsPoint2D();
for (uint i = 0; i < m_data.size(); ++i) {
QPointF p(i, m_data[i]);
vertices[i].set(p.x(), p.y());
}
node->markDirty(QSGNode::DirtyGeometry);
return node;
}
void QSGDefaultImageNode::updateGeometry()
{
Q_ASSERT(!m_targetRect.isEmpty());
const QSGTexture *t = m_material.texture();
if (!t) {
QSGGeometry *g = geometry();
g->allocate(4);
g->setDrawingMode(GL_TRIANGLE_STRIP);
memset(g->vertexData(), 0, g->sizeOfVertex() * 4);
} else {
QRectF sourceRect = t->normalizedTextureSubRect();
QRectF innerSourceRect(sourceRect.x() + m_innerSourceRect.x() * sourceRect.width(),
sourceRect.y() + m_innerSourceRect.y() * sourceRect.height(),
m_innerSourceRect.width() * sourceRect.width(),
m_innerSourceRect.height() * sourceRect.height());
bool hasMargins = m_targetRect != m_innerTargetRect;
int floorLeft = qFloor(m_subSourceRect.left());
int ceilRight = qCeil(m_subSourceRect.right());
int floorTop = qFloor(m_subSourceRect.top());
int ceilBottom = qCeil(m_subSourceRect.bottom());
int hTiles = ceilRight - floorLeft;
int vTiles = ceilBottom - floorTop;
bool hasTiles = hTiles != 1 || vTiles != 1;
bool fullTexture = innerSourceRect == QRectF(0, 0, 1, 1);
#ifdef QT_OPENGL_ES_2
QOpenGLContext *ctx = QOpenGLContext::currentContext();
bool npotSupported = ctx->functions()->hasOpenGLFeature(QOpenGLFunctions::NPOTTextureRepeat);
QSize size = t->textureSize();
bool isNpot = !isPowerOfTwo(size.width()) || !isPowerOfTwo(size.height());
bool wrapSupported = npotSupported || !isNpot;
#else
bool wrapSupported = true;
#endif
// An image can be rendered as a single quad if:
// - There are no margins, and either:
// - the image isn't repeated
// - the source rectangle fills the entire texture so that texture wrapping can be used,
// and NPOT is supported
if (!hasMargins && (!hasTiles || (fullTexture && wrapSupported))) {
QRectF sr;
if (!fullTexture) {
sr = QRectF(innerSourceRect.x() + (m_subSourceRect.left() - floorLeft) * innerSourceRect.width(),
innerSourceRect.y() + (m_subSourceRect.top() - floorTop) * innerSourceRect.height(),
m_subSourceRect.width() * innerSourceRect.width(),
m_subSourceRect.height() * innerSourceRect.height());
} else {
sr = QRectF(m_subSourceRect.left() - floorLeft, m_subSourceRect.top() - floorTop,
m_subSourceRect.width(), m_subSourceRect.height());
}
if (m_mirror) {
qreal oldLeft = sr.left();
sr.setLeft(sr.right());
sr.setRight(oldLeft);
}
if (m_antialiasing) {
QSGGeometry *g = geometry();
Q_ASSERT(g != &m_geometry);
g->allocate(8, 14);
g->setDrawingMode(GL_TRIANGLE_STRIP);
SmoothVertex *vertices = reinterpret_cast<SmoothVertex *>(g->vertexData());
float delta = float(qAbs(m_targetRect.width()) < qAbs(m_targetRect.height())
? m_targetRect.width() : m_targetRect.height()) * 0.5f;
float sx = float(sr.width() / m_targetRect.width());
float sy = float(sr.height() / m_targetRect.height());
for (int d = -1; d <= 1; d += 2) {
for (int j = 0; j < 2; ++j) {
for (int i = 0; i < 2; ++i, ++vertices) {
vertices->x = m_targetRect.x() + i * m_targetRect.width();
vertices->y = m_targetRect.y() + j * m_targetRect.height();
vertices->u = sr.x() + i * sr.width();
vertices->v = sr.y() + j * sr.height();
vertices->dx = (i == 0 ? delta : -delta) * d;
vertices->dy = (j == 0 ? delta : -delta) * d;
vertices->du = (d < 0 ? 0 : vertices->dx * sx);
vertices->dv = (d < 0 ? 0 : vertices->dy * sy);
}
}
}
Q_ASSERT(vertices - g->vertexCount() == g->vertexData());
static const quint16 indices[] = {
0, 4, 1, 5, 3, 7, 2, 6, 0, 4,
4, 6, 5, 7
};
Q_ASSERT(g->sizeOfIndex() * g->indexCount() == sizeof(indices));
memcpy(g->indexDataAsUShort(), indices, sizeof(indices));
} else {
m_geometry.allocate(4);
m_geometry.setDrawingMode(GL_TRIANGLE_STRIP);
QSGGeometry::updateTexturedRectGeometry(&m_geometry, m_targetRect, sr);
}
} else {
int hCells = hTiles;
int vCells = vTiles;
if (m_innerTargetRect.width() == 0)
hCells = 0;
if (m_innerTargetRect.left() != m_targetRect.left())
++hCells;
if (m_innerTargetRect.right() != m_targetRect.right())
++hCells;
if (m_innerTargetRect.height() == 0)
vCells = 0;
if (m_innerTargetRect.top() != m_targetRect.top())
++vCells;
if (m_innerTargetRect.bottom() != m_targetRect.bottom())
++vCells;
QVarLengthArray<X, 32> xData(2 * hCells);
QVarLengthArray<Y, 32> yData(2 * vCells);
X *xs = xData.data();
Y *ys = yData.data();
if (m_innerTargetRect.left() != m_targetRect.left()) {
xs[0].x = m_targetRect.left();
xs[0].tx = sourceRect.left();
xs[1].x = m_innerTargetRect.left();
xs[1].tx = innerSourceRect.left();
xs += 2;
}
if (m_innerTargetRect.width() != 0) {
xs[0].x = m_innerTargetRect.left();
xs[0].tx = innerSourceRect.x() + (m_subSourceRect.left() - floorLeft) * innerSourceRect.width();
++xs;
float b = m_innerTargetRect.width() / m_subSourceRect.width();
float a = m_innerTargetRect.x() - m_subSourceRect.x() * b;
for (int i = floorLeft + 1; i <= ceilRight - 1; ++i) {
xs[0].x = xs[1].x = a + b * i;
xs[0].tx = innerSourceRect.right();
xs[1].tx = innerSourceRect.left();
xs += 2;
}
xs[0].x = m_innerTargetRect.right();
xs[0].tx = innerSourceRect.x() + (m_subSourceRect.right() - ceilRight + 1) * innerSourceRect.width();
++xs;
}
if (m_innerTargetRect.right() != m_targetRect.right()) {
xs[0].x = m_innerTargetRect.right();
xs[0].tx = innerSourceRect.right();
xs[1].x = m_targetRect.right();
xs[1].tx = sourceRect.right();
xs += 2;
}
Q_ASSERT(xs == xData.data() + xData.size());
if (m_mirror) {
float leftPlusRight = m_targetRect.left() + m_targetRect.right();
int count = xData.size();
xs = xData.data();
for (int i = 0; i < count >> 1; ++i)
qSwap(xs[i], xs[count - 1 - i]);
for (int i = 0; i < count; ++i)
xs[i].x = leftPlusRight - xs[i].x;
}
if (m_innerTargetRect.top() != m_targetRect.top()) {
ys[0].y = m_targetRect.top();
ys[0].ty = sourceRect.top();
ys[1].y = m_innerTargetRect.top();
ys[1].ty = innerSourceRect.top();
ys += 2;
}
if (m_innerTargetRect.height() != 0) {
ys[0].y = m_innerTargetRect.top();
ys[0].ty = innerSourceRect.y() + (m_subSourceRect.top() - floorTop) * innerSourceRect.height();
++ys;
float b = m_innerTargetRect.height() / m_subSourceRect.height();
float a = m_innerTargetRect.y() - m_subSourceRect.y() * b;
for (int i = floorTop + 1; i <= ceilBottom - 1; ++i) {
ys[0].y = ys[1].y = a + b * i;
ys[0].ty = innerSourceRect.bottom();
ys[1].ty = innerSourceRect.top();
ys += 2;
}
ys[0].y = m_innerTargetRect.bottom();
ys[0].ty = innerSourceRect.y() + (m_subSourceRect.bottom() - ceilBottom + 1) * innerSourceRect.height();
++ys;
}
if (m_innerTargetRect.bottom() != m_targetRect.bottom()) {
ys[0].y = m_innerTargetRect.bottom();
ys[0].ty = innerSourceRect.bottom();
ys[1].y = m_targetRect.bottom();
ys[1].ty = sourceRect.bottom();
ys += 2;
}
Q_ASSERT(ys == yData.data() + yData.size());
if (m_antialiasing) {
QSGGeometry *g = geometry();
Q_ASSERT(g != &m_geometry);
g->allocate(hCells * vCells * 4 + (hCells + vCells - 1) * 4,
hCells * vCells * 6 + (hCells + vCells) * 12);
g->setDrawingMode(GL_TRIANGLES);
SmoothVertex *vertices = reinterpret_cast<SmoothVertex *>(g->vertexData());
memset(vertices, 0, g->vertexCount() * g->sizeOfVertex());
quint16 *indices = g->indexDataAsUShort();
// The deltas are how much the fuzziness can reach into the image.
// Only the border vertices are moved by the vertex shader, so the fuzziness
// can't reach further into the image than the closest interior vertices.
float leftDx = xData.at(1).x - xData.at(0).x;
float rightDx = xData.at(xData.size() - 1).x - xData.at(xData.size() - 2).x;
float topDy = yData.at(1).y - yData.at(0).y;
float bottomDy = yData.at(yData.size() - 1).y - yData.at(yData.size() - 2).y;
float leftDu = xData.at(1).tx - xData.at(0).tx;
float rightDu = xData.at(xData.size() - 1).tx - xData.at(xData.size() - 2).tx;
float topDv = yData.at(1).ty - yData.at(0).ty;
float bottomDv = yData.at(yData.size() - 1).ty - yData.at(yData.size() - 2).ty;
if (hCells == 1) {
leftDx = rightDx *= 0.5f;
leftDu = rightDu *= 0.5f;
}
if (vCells == 1) {
topDy = bottomDy *= 0.5f;
topDv = bottomDv *= 0.5f;
}
// This delta is how much the fuzziness can reach out from the image.
float delta = float(qAbs(m_targetRect.width()) < qAbs(m_targetRect.height())
? m_targetRect.width() : m_targetRect.height()) * 0.5f;
quint16 index = 0;
ys = yData.data();
for (int j = 0; j < vCells; ++j, ys += 2) {
xs = xData.data();
bool isTop = j == 0;
bool isBottom = j == vCells - 1;
for (int i = 0; i < hCells; ++i, xs += 2) {
bool isLeft = i == 0;
bool isRight = i == hCells - 1;
SmoothVertex *v = vertices + index;
quint16 topLeft = index;
for (int k = (isTop || isLeft ? 2 : 1); k--; ++v, ++index) {
v->x = xs[0].x;
v->u = xs[0].tx;
v->y = ys[0].y;
v->v = ys[0].ty;
}
quint16 topRight = index;
for (int k = (isTop || isRight ? 2 : 1); k--; ++v, ++index) {
v->x = xs[1].x;
v->u = xs[1].tx;
v->y = ys[0].y;
v->v = ys[0].ty;
}
quint16 bottomLeft = index;
for (int k = (isBottom || isLeft ? 2 : 1); k--; ++v, ++index) {
v->x = xs[0].x;
v->u = xs[0].tx;
v->y = ys[1].y;
v->v = ys[1].ty;
}
quint16 bottomRight = index;
for (int k = (isBottom || isRight ? 2 : 1); k--; ++v, ++index) {
v->x = xs[1].x;
v->u = xs[1].tx;
v->y = ys[1].y;
v->v = ys[1].ty;
}
appendQuad(&indices, topLeft, topRight, bottomLeft, bottomRight);
if (isTop) {
vertices[topLeft].dy = vertices[topRight].dy = topDy;
vertices[topLeft].dv = vertices[topRight].dv = topDv;
vertices[topLeft + 1].dy = vertices[topRight + 1].dy = -delta;
appendQuad(&indices, topLeft + 1, topRight + 1, topLeft, topRight);
}
if (isBottom) {
vertices[bottomLeft].dy = vertices[bottomRight].dy = -bottomDy;
vertices[bottomLeft].dv = vertices[bottomRight].dv = -bottomDv;
vertices[bottomLeft + 1].dy = vertices[bottomRight + 1].dy = delta;
appendQuad(&indices, bottomLeft, bottomRight, bottomLeft + 1, bottomRight + 1);
}
if (isLeft) {
vertices[topLeft].dx = vertices[bottomLeft].dx = leftDx;
vertices[topLeft].du = vertices[bottomLeft].du = leftDu;
vertices[topLeft + 1].dx = vertices[bottomLeft + 1].dx = -delta;
appendQuad(&indices, topLeft + 1, topLeft, bottomLeft + 1, bottomLeft);
}
if (isRight) {
vertices[topRight].dx = vertices[bottomRight].dx = -rightDx;
vertices[topRight].du = vertices[bottomRight].du = -rightDu;
vertices[topRight + 1].dx = vertices[bottomRight + 1].dx = delta;
appendQuad(&indices, topRight, topRight + 1, bottomRight, bottomRight + 1);
}
}
}
Q_ASSERT(index == g->vertexCount());
Q_ASSERT(indices - g->indexCount() == g->indexData());
} else {
m_geometry.allocate(hCells * vCells * 4, hCells * vCells * 6);
m_geometry.setDrawingMode(GL_TRIANGLES);
QSGGeometry::TexturedPoint2D *vertices = m_geometry.vertexDataAsTexturedPoint2D();
ys = yData.data();
for (int j = 0; j < vCells; ++j, ys += 2) {
xs = xData.data();
for (int i = 0; i < hCells; ++i, xs += 2) {
vertices[0].x = vertices[2].x = xs[0].x;
vertices[0].tx = vertices[2].tx = xs[0].tx;
vertices[1].x = vertices[3].x = xs[1].x;
vertices[1].tx = vertices[3].tx = xs[1].tx;
vertices[0].y = vertices[1].y = ys[0].y;
vertices[0].ty = vertices[1].ty = ys[0].ty;
vertices[2].y = vertices[3].y = ys[1].y;
vertices[2].ty = vertices[3].ty = ys[1].ty;
vertices += 4;
}
}
quint16 *indices = m_geometry.indexDataAsUShort();
for (int i = 0; i < 4 * vCells * hCells; i += 4)
appendQuad(&indices, i, i + 1, i + 2, i + 3);
}
}
}
markDirty(DirtyGeometry);
m_dirtyGeometry = false;
}
QSGNode *GraphConnection::updatePaintNode(QSGNode *oldNode, UpdatePaintNodeData *)
{
if (m_source == m_sink)
return oldNode;
QSGGeometryNode *node = 0;
QSGGeometry *geometry = 0;
QPointF p1, p2, p3, p4;
p1.setX(m_source.x());
p1.setY(m_source.y());
p4.setX(m_sink.x());
p4.setY(m_sink.y());
p2.setX(p1.x());
p3.setX(p4.x());
if (p1.y() < p4.y()) {
p2.setY(p1.y() * 0.75 + p4.y() * 0.25);
p3.setY(p4.y() * 0.75 + p1.y() * 0.25);
} else {
p2.setY(p1.y() - (p4.y()-p1.y())*0.25);
p3.setY(p4.y() + (p4.y()-p1.y())*0.25);
}
// quick 'n' dirty estimation of bezier length
// http://steve.hollasch.net/cgindex/curves/cbezarclen.html
qreal l1 = (QVector2D(p2)-QVector2D(p1)).length() +
(QVector2D(p3)-QVector2D(p2)).length() +
(QVector2D(p4)-QVector2D(p3)).length();
qreal l0 = (QVector2D(p4)-QVector2D(p1)).length();
qreal length = 0.5*l0 + 0.5*l1;
int segmentCount = length;
if (!oldNode) {
node = new QSGGeometryNode;
geometry = new QSGGeometry(QSGGeometry::defaultAttributes_Point2D(), segmentCount);
geometry->setLineWidth(2);
geometry->setDrawingMode(GL_LINE_STRIP);
node->setGeometry(geometry);
node->setFlag(QSGNode::OwnsGeometry);
QSGFlatColorMaterial *material = new QSGFlatColorMaterial;
material->setColor(QColor(0, 0, 0));
node->setMaterial(material);
node->setFlag(QSGNode::OwnsMaterial);
} else {
node = static_cast<QSGGeometryNode *>(oldNode);
geometry = node->geometry();
geometry->allocate(segmentCount);
}
QRectF bounds = boundingRect();
QSGGeometry::Point2D *vertices = geometry->vertexDataAsPoint2D();
for (int i = 0; i < segmentCount; ++i) {
qreal t = i / qreal(segmentCount - 1);
qreal invt = 1 - t;
// Bezier
QPointF pos = invt * invt * invt * p1
+ 3 * invt * invt * t * p2
+ 3 * invt * t * t * p3
+ t * t * t * p4;
float x = pos.x();
float y = pos.y();
vertices[i].set(x, y);
}
return node;
}
QSGGeometry *QSGBasicInternalImageNode::updateGeometry(const QRectF &targetRect,
const QRectF &innerTargetRect,
const QRectF &sourceRect,
const QRectF &innerSourceRect,
const QRectF &subSourceRect,
QSGGeometry *geometry,
bool mirror,
bool antialiasing)
{
int floorLeft = qFloor(subSourceRect.left());
int ceilRight = qCeil(subSourceRect.right());
int floorTop = qFloor(subSourceRect.top());
int ceilBottom = qCeil(subSourceRect.bottom());
int hTiles = ceilRight - floorLeft;
int vTiles = ceilBottom - floorTop;
int hCells = hTiles;
int vCells = vTiles;
if (innerTargetRect.width() == 0)
hCells = 0;
if (innerTargetRect.left() != targetRect.left())
++hCells;
if (innerTargetRect.right() != targetRect.right())
++hCells;
if (innerTargetRect.height() == 0)
vCells = 0;
if (innerTargetRect.top() != targetRect.top())
++vCells;
if (innerTargetRect.bottom() != targetRect.bottom())
++vCells;
QVarLengthArray<X, 32> xData(2 * hCells);
QVarLengthArray<Y, 32> yData(2 * vCells);
X *xs = xData.data();
Y *ys = yData.data();
if (innerTargetRect.left() != targetRect.left()) {
xs[0].x = targetRect.left();
xs[0].tx = sourceRect.left();
xs[1].x = innerTargetRect.left();
xs[1].tx = innerSourceRect.left();
xs += 2;
}
if (innerTargetRect.width() != 0) {
xs[0].x = innerTargetRect.left();
xs[0].tx = innerSourceRect.x() + (subSourceRect.left() - floorLeft) * innerSourceRect.width();
++xs;
float b = innerTargetRect.width() / subSourceRect.width();
float a = innerTargetRect.x() - subSourceRect.x() * b;
for (int i = floorLeft + 1; i <= ceilRight - 1; ++i) {
xs[0].x = xs[1].x = a + b * i;
xs[0].tx = innerSourceRect.right();
xs[1].tx = innerSourceRect.left();
xs += 2;
}
xs[0].x = innerTargetRect.right();
xs[0].tx = innerSourceRect.x() + (subSourceRect.right() - ceilRight + 1) * innerSourceRect.width();
++xs;
}
if (innerTargetRect.right() != targetRect.right()) {
xs[0].x = innerTargetRect.right();
xs[0].tx = innerSourceRect.right();
xs[1].x = targetRect.right();
xs[1].tx = sourceRect.right();
xs += 2;
}
Q_ASSERT(xs == xData.data() + xData.size());
if (mirror) {
float leftPlusRight = targetRect.left() + targetRect.right();
int count = xData.size();
xs = xData.data();
for (int i = 0; i < count >> 1; ++i)
qSwap(xs[i], xs[count - 1 - i]);
for (int i = 0; i < count; ++i)
xs[i].x = leftPlusRight - xs[i].x;
}
if (innerTargetRect.top() != targetRect.top()) {
ys[0].y = targetRect.top();
ys[0].ty = sourceRect.top();
ys[1].y = innerTargetRect.top();
ys[1].ty = innerSourceRect.top();
ys += 2;
}
if (innerTargetRect.height() != 0) {
ys[0].y = innerTargetRect.top();
ys[0].ty = innerSourceRect.y() + (subSourceRect.top() - floorTop) * innerSourceRect.height();
++ys;
float b = innerTargetRect.height() / subSourceRect.height();
float a = innerTargetRect.y() - subSourceRect.y() * b;
for (int i = floorTop + 1; i <= ceilBottom - 1; ++i) {
ys[0].y = ys[1].y = a + b * i;
ys[0].ty = innerSourceRect.bottom();
ys[1].ty = innerSourceRect.top();
ys += 2;
}
ys[0].y = innerTargetRect.bottom();
ys[0].ty = innerSourceRect.y() + (subSourceRect.bottom() - ceilBottom + 1) * innerSourceRect.height();
++ys;
}
if (innerTargetRect.bottom() != targetRect.bottom()) {
ys[0].y = innerTargetRect.bottom();
ys[0].ty = innerSourceRect.bottom();
ys[1].y = targetRect.bottom();
ys[1].ty = sourceRect.bottom();
ys += 2;
}
Q_ASSERT(ys == yData.data() + yData.size());
if (antialiasing) {
QSGGeometry *g = geometry;
Q_ASSERT(g);
g->allocate(hCells * vCells * 4 + (hCells + vCells - 1) * 4,
hCells * vCells * 6 + (hCells + vCells) * 12);
g->setDrawingMode(QSGGeometry::DrawTriangles);
SmoothVertex *vertices = reinterpret_cast<SmoothVertex *>(g->vertexData());
memset(vertices, 0, g->vertexCount() * g->sizeOfVertex());
quint16 *indices = g->indexDataAsUShort();
// The deltas are how much the fuzziness can reach into the image.
// Only the border vertices are moved by the vertex shader, so the fuzziness
// can't reach further into the image than the closest interior vertices.
float leftDx = xData.at(1).x - xData.at(0).x;
float rightDx = xData.at(xData.size() - 1).x - xData.at(xData.size() - 2).x;
float topDy = yData.at(1).y - yData.at(0).y;
float bottomDy = yData.at(yData.size() - 1).y - yData.at(yData.size() - 2).y;
float leftDu = xData.at(1).tx - xData.at(0).tx;
float rightDu = xData.at(xData.size() - 1).tx - xData.at(xData.size() - 2).tx;
float topDv = yData.at(1).ty - yData.at(0).ty;
float bottomDv = yData.at(yData.size() - 1).ty - yData.at(yData.size() - 2).ty;
if (hCells == 1) {
leftDx = rightDx *= 0.5f;
leftDu = rightDu *= 0.5f;
}
if (vCells == 1) {
topDy = bottomDy *= 0.5f;
topDv = bottomDv *= 0.5f;
}
// This delta is how much the fuzziness can reach out from the image.
float delta = float(qAbs(targetRect.width()) < qAbs(targetRect.height())
? targetRect.width() : targetRect.height()) * 0.5f;
quint16 index = 0;
ys = yData.data();
for (int j = 0; j < vCells; ++j, ys += 2) {
xs = xData.data();
bool isTop = j == 0;
bool isBottom = j == vCells - 1;
for (int i = 0; i < hCells; ++i, xs += 2) {
bool isLeft = i == 0;
bool isRight = i == hCells - 1;
SmoothVertex *v = vertices + index;
quint16 topLeft = index;
for (int k = (isTop || isLeft ? 2 : 1); k--; ++v, ++index) {
v->x = xs[0].x;
v->u = xs[0].tx;
v->y = ys[0].y;
v->v = ys[0].ty;
}
quint16 topRight = index;
for (int k = (isTop || isRight ? 2 : 1); k--; ++v, ++index) {
v->x = xs[1].x;
v->u = xs[1].tx;
v->y = ys[0].y;
v->v = ys[0].ty;
}
quint16 bottomLeft = index;
for (int k = (isBottom || isLeft ? 2 : 1); k--; ++v, ++index) {
v->x = xs[0].x;
v->u = xs[0].tx;
v->y = ys[1].y;
v->v = ys[1].ty;
}
quint16 bottomRight = index;
for (int k = (isBottom || isRight ? 2 : 1); k--; ++v, ++index) {
v->x = xs[1].x;
v->u = xs[1].tx;
v->y = ys[1].y;
v->v = ys[1].ty;
}
appendQuad(&indices, topLeft, topRight, bottomLeft, bottomRight);
if (isTop) {
vertices[topLeft].dy = vertices[topRight].dy = topDy;
vertices[topLeft].dv = vertices[topRight].dv = topDv;
vertices[topLeft + 1].dy = vertices[topRight + 1].dy = -delta;
appendQuad(&indices, topLeft + 1, topRight + 1, topLeft, topRight);
}
if (isBottom) {
vertices[bottomLeft].dy = vertices[bottomRight].dy = -bottomDy;
vertices[bottomLeft].dv = vertices[bottomRight].dv = -bottomDv;
vertices[bottomLeft + 1].dy = vertices[bottomRight + 1].dy = delta;
appendQuad(&indices, bottomLeft, bottomRight, bottomLeft + 1, bottomRight + 1);
}
if (isLeft) {
vertices[topLeft].dx = vertices[bottomLeft].dx = leftDx;
vertices[topLeft].du = vertices[bottomLeft].du = leftDu;
vertices[topLeft + 1].dx = vertices[bottomLeft + 1].dx = -delta;
appendQuad(&indices, topLeft + 1, topLeft, bottomLeft + 1, bottomLeft);
}
if (isRight) {
vertices[topRight].dx = vertices[bottomRight].dx = -rightDx;
vertices[topRight].du = vertices[bottomRight].du = -rightDu;
vertices[topRight + 1].dx = vertices[bottomRight + 1].dx = delta;
appendQuad(&indices, topRight, topRight + 1, bottomRight, bottomRight + 1);
}
}
}
Q_ASSERT(index == g->vertexCount());
Q_ASSERT(indices - g->indexCount() == g->indexData());
} else {
if (!geometry) {
geometry = new QSGGeometry(QSGGeometry::defaultAttributes_TexturedPoint2D(),
hCells * vCells * 4, hCells * vCells * 6,
QSGGeometry::UnsignedShortType);
} else {
geometry->allocate(hCells * vCells * 4, hCells * vCells * 6);
}
geometry->setDrawingMode(QSGGeometry::DrawTriangles);
QSGGeometry::TexturedPoint2D *vertices = geometry->vertexDataAsTexturedPoint2D();
ys = yData.data();
for (int j = 0; j < vCells; ++j, ys += 2) {
xs = xData.data();
for (int i = 0; i < hCells; ++i, xs += 2) {
vertices[0].x = vertices[2].x = xs[0].x;
vertices[0].tx = vertices[2].tx = xs[0].tx;
vertices[1].x = vertices[3].x = xs[1].x;
vertices[1].tx = vertices[3].tx = xs[1].tx;
vertices[0].y = vertices[1].y = ys[0].y;
vertices[0].ty = vertices[1].ty = ys[0].ty;
vertices[2].y = vertices[3].y = ys[1].y;
vertices[2].ty = vertices[3].ty = ys[1].ty;
vertices += 4;
}
}
quint16 *indices = geometry->indexDataAsUShort();
for (int i = 0; i < 4 * vCells * hCells; i += 4)
appendQuad(&indices, i, i + 1, i + 2, i + 3);
}
return geometry;
}
void QQuickShapeGenericRenderer::updateFillNode(ShapePathData *d, QQuickShapeGenericNode *node)
{
if (!node->m_fillNode)
return;
if (!(d->effectiveDirty & (DirtyFillGeom | DirtyColor | DirtyFillGradient)))
return;
// Make a copy of the data that will be accessed by the material on
// the render thread. This must be done even when we bail out below.
QQuickShapeGenericStrokeFillNode *n = node->m_fillNode;
updateShadowDataInNode(d, n);
QSGGeometry *g = n->geometry();
if (d->fillVertices.isEmpty()) {
if (g->vertexCount() || g->indexCount()) {
g->allocate(0, 0);
n->markDirty(QSGNode::DirtyGeometry);
}
return;
}
if (d->fillGradientActive) {
QQuickShapeGenericStrokeFillNode::Material gradMat;
switch (d->fillGradientActive) {
case LinearGradient:
gradMat = QQuickShapeGenericStrokeFillNode::MatLinearGradient;
break;
case RadialGradient:
gradMat = QQuickShapeGenericStrokeFillNode::MatRadialGradient;
break;
case ConicalGradient:
gradMat = QQuickShapeGenericStrokeFillNode::MatConicalGradient;
break;
default:
Q_UNREACHABLE();
}
n->activateMaterial(m_item->window(), gradMat);
if (d->effectiveDirty & DirtyFillGradient) {
// Gradients are implemented via a texture-based material.
n->markDirty(QSGNode::DirtyMaterial);
// stop here if only the gradient changed; no need to touch the geometry
if (!(d->effectiveDirty & DirtyFillGeom))
return;
}
} else {
n->activateMaterial(m_item->window(), QQuickShapeGenericStrokeFillNode::MatSolidColor);
// fast path for updating only color values when no change in vertex positions
if ((d->effectiveDirty & DirtyColor) && !(d->effectiveDirty & DirtyFillGeom)) {
ColoredVertex *vdst = reinterpret_cast<ColoredVertex *>(g->vertexData());
for (int i = 0; i < g->vertexCount(); ++i)
vdst[i].set(vdst[i].x, vdst[i].y, d->fillColor);
n->markDirty(QSGNode::DirtyGeometry);
return;
}
}
const int indexCount = d->indexType == QSGGeometry::UnsignedShortType
? d->fillIndices.count() * 2 : d->fillIndices.count();
if (g->indexType() != d->indexType) {
g = new QSGGeometry(QSGGeometry::defaultAttributes_ColoredPoint2D(),
d->fillVertices.count(), indexCount, d->indexType);
n->setGeometry(g);
} else {
g->allocate(d->fillVertices.count(), indexCount);
}
g->setDrawingMode(QSGGeometry::DrawTriangles);
memcpy(g->vertexData(), d->fillVertices.constData(), g->vertexCount() * g->sizeOfVertex());
memcpy(g->indexData(), d->fillIndices.constData(), g->indexCount() * g->sizeOfIndex());
n->markDirty(QSGNode::DirtyGeometry);
}
void QSGBasicInternalImageNode::updateGeometry()
{
Q_ASSERT(!m_targetRect.isEmpty());
const QSGTexture *t = materialTexture();
if (!t) {
QSGGeometry *g = geometry();
g->allocate(4);
g->setDrawingMode(QSGGeometry::DrawTriangleStrip);
memset(g->vertexData(), 0, g->sizeOfVertex() * 4);
} else {
QRectF sourceRect = t->normalizedTextureSubRect();
QRectF innerSourceRect(sourceRect.x() + m_innerSourceRect.x() * sourceRect.width(),
sourceRect.y() + m_innerSourceRect.y() * sourceRect.height(),
m_innerSourceRect.width() * sourceRect.width(),
m_innerSourceRect.height() * sourceRect.height());
bool hasMargins = m_targetRect != m_innerTargetRect;
int floorLeft = qFloor(m_subSourceRect.left());
int ceilRight = qCeil(m_subSourceRect.right());
int floorTop = qFloor(m_subSourceRect.top());
int ceilBottom = qCeil(m_subSourceRect.bottom());
int hTiles = ceilRight - floorLeft;
int vTiles = ceilBottom - floorTop;
bool hasTiles = hTiles != 1 || vTiles != 1;
bool fullTexture = innerSourceRect == QRectF(0, 0, 1, 1);
// An image can be rendered as a single quad if:
// - There are no margins, and either:
// - the image isn't repeated
// - the source rectangle fills the entire texture so that texture wrapping can be used,
// and NPOT is supported
if (!hasMargins && (!hasTiles || (fullTexture && supportsWrap(t->textureSize())))) {
QRectF sr;
if (!fullTexture) {
sr = QRectF(innerSourceRect.x() + (m_subSourceRect.left() - floorLeft) * innerSourceRect.width(),
innerSourceRect.y() + (m_subSourceRect.top() - floorTop) * innerSourceRect.height(),
m_subSourceRect.width() * innerSourceRect.width(),
m_subSourceRect.height() * innerSourceRect.height());
} else {
sr = QRectF(m_subSourceRect.left() - floorLeft, m_subSourceRect.top() - floorTop,
m_subSourceRect.width(), m_subSourceRect.height());
}
if (m_mirror) {
qreal oldLeft = sr.left();
sr.setLeft(sr.right());
sr.setRight(oldLeft);
}
if (m_antialiasing) {
QSGGeometry *g = geometry();
Q_ASSERT(g != &m_geometry);
g->allocate(8, 14);
g->setDrawingMode(QSGGeometry::DrawTriangleStrip);
SmoothVertex *vertices = reinterpret_cast<SmoothVertex *>(g->vertexData());
float delta = float(qAbs(m_targetRect.width()) < qAbs(m_targetRect.height())
? m_targetRect.width() : m_targetRect.height()) * 0.5f;
float sx = float(sr.width() / m_targetRect.width());
float sy = float(sr.height() / m_targetRect.height());
for (int d = -1; d <= 1; d += 2) {
for (int j = 0; j < 2; ++j) {
for (int i = 0; i < 2; ++i, ++vertices) {
vertices->x = m_targetRect.x() + i * m_targetRect.width();
vertices->y = m_targetRect.y() + j * m_targetRect.height();
vertices->u = sr.x() + i * sr.width();
vertices->v = sr.y() + j * sr.height();
vertices->dx = (i == 0 ? delta : -delta) * d;
vertices->dy = (j == 0 ? delta : -delta) * d;
vertices->du = (d < 0 ? 0 : vertices->dx * sx);
vertices->dv = (d < 0 ? 0 : vertices->dy * sy);
}
}
}
Q_ASSERT(vertices - g->vertexCount() == g->vertexData());
static const quint16 indices[] = {
0, 4, 1, 5, 3, 7, 2, 6, 0, 4,
4, 6, 5, 7
};
Q_ASSERT(g->sizeOfIndex() * g->indexCount() == sizeof(indices));
memcpy(g->indexDataAsUShort(), indices, sizeof(indices));
} else {
m_geometry.allocate(4);
m_geometry.setDrawingMode(QSGGeometry::DrawTriangleStrip);
QSGGeometry::updateTexturedRectGeometry(&m_geometry, m_targetRect, sr);
}
} else {
QSGGeometry *g = m_antialiasing ? geometry() : &m_geometry;
updateGeometry(m_targetRect, m_innerTargetRect,
sourceRect, innerSourceRect, m_subSourceRect,
g, m_mirror, m_antialiasing);
}
}
markDirty(DirtyGeometry);
m_dirtyGeometry = false;
}
QSGNode* OMX_MediaProcessorElement::updatePaintNode(QSGNode*, UpdatePaintNodeData*)
{
if (!m_texProvider) {
m_texProvider = new OMX_TextureProviderQQuickItem(this);
m_mediaProc = new OMX_MediaProcessor(m_texProvider);
connect(m_mediaProc, SIGNAL(playbackCompleted()), this, SIGNAL(playbackCompleted()));
connect(m_mediaProc, SIGNAL(playbackStarted()), this, SIGNAL(playbackStarted()));
// Open if filepath is set.
// TODO: Handle errors.
if (!m_source.isNull()) {
//if (QFile(m_source).exists()) {
if (openMedia(m_source))
m_mediaProc->play();
//}
//else {
LOG_WARNING(LOG_TAG, "File does not exist.");
//}
}
}
return NULL;
#if 0
QSGGeometryNode* node = 0;
QSGGeometry* geometry = 0;
if (!oldNode) {
// Create the node.
node = new QSGGeometryNode;
geometry = new QSGGeometry(QSGGeometry::defaultAttributes_TexturedPoint2D(), 4);
geometry->setDrawingMode(GL_TRIANGLE_STRIP);
node->setGeometry(geometry);
node->setFlag(QSGNode::OwnsGeometry);
// TODO: Who is freeing this?
// TODO: I cannot know the texture size here.
QSGOpaqueTextureMaterial* material = new QSGOpaqueTextureMaterial;
m_sgtexture = new OMX_SGTexture(m_texture, QSize(1920, 1080));
material->setTexture(m_sgtexture);
node->setMaterial(material);
node->setFlag(QSGNode::OwnsMaterial);
#ifdef ENABLE_VIDEO_PROCESSOR
QPlatformNativeInterface* nativeInterface =
QGuiApplicationPrivate::platformIntegration()->nativeInterface();
Q_ASSERT(nativeInterface);
EGLDisplay eglDisplay = nativeInterface->nativeResourceForIntegration("egldisplay");
EGLContext eglContext = nativeInterface->nativeResourceForContext(
"eglcontext",
QOpenGLContext::currentContext()
);
#endif
// Provider MUST be built in this thread.
m_provider = new OMX_TextureProviderQQuickItem(this);
#ifdef ENABLE_VIDEO_PROCESSOR
m_videoProc = new OMX_VideoProcessor(eglDisplay, eglContext, m_provider);
connect(m_videoProc, SIGNAL(textureReady(uint)), this, SLOT(onTextureChanged(uint)));
if (!m_source.isNull())
m_videoProc->setVideoPath(m_source);
if (m_playScheduled) {
m_timer->start(30);
m_videoProc->play();
}
#elif ENABLE_MEDIA_PROCESSOR
LOG_VERBOSE(LOG_TAG, "Starting video using media processor...");
m_mediaProc = new OMX_MediaProcessor(m_provider);
m_mediaProc->setFilename("/home/pi/usb/Cars2.mkv", m_texture);
//if (m_playScheduled) {
m_timer->start(40);
m_mediaProc->play();
//}
#else
LOG_VERBOSE(LOG_TAG, "Starting video...");
QtConcurrent::run(&startVideo, m_provider, this);
m_timer->start(30);
#endif
}
else {
node = static_cast<QSGGeometryNode*>(oldNode);
geometry = node->geometry();
geometry->allocate(4);
// Update texture in the node if needed.
QSGOpaqueTextureMaterial* material = (QSGOpaqueTextureMaterial*)node->material();
if (m_texture != (GLuint)material->texture()->textureId()) {
// TODO: Does setTextureId frees the prev texture?
// TODO: I should the given the texture size.
LOG_ERROR(LOG_TAG, "Updating texture to %u!", m_texture);
material = new QSGOpaqueTextureMaterial;
m_sgtexture->setTexture(m_texture, QSize(1920, 1080));
}
}
// Create the vertices and map to texture.
QRectF bounds = boundingRect();
QSGGeometry::TexturedPoint2D* vertices = geometry->vertexDataAsTexturedPoint2D();
vertices[0].set(bounds.x(), bounds.y() + bounds.height(), 0.0f, 0.0f);
vertices[1].set(bounds.x() + bounds.width(), bounds.y() + bounds.height(), 1.0f, 0.0f);
vertices[2].set(bounds.x(), bounds.y(), 0.0f, 1.0f);
vertices[3].set(bounds.x() + bounds.width(), bounds.y(), 1.0f, 1.0f);
return node;
#endif
}
QSGNode* NodeConnectionLines::updatePaintNode(QSGNode* oldNode, UpdatePaintNodeData*) {
if (!m_nodeObject) return nullptr;
const QVector<QPointer<NodeBase>>& connectedNodes = m_nodeObject->getConnectedNodes();
int connectionCount = connectedNodes.size();
// -------------------- Prepare QSG Nodes:
QSGNode* parentNode = oldNode;
if (!oldNode) {
parentNode = new QSGNode();
} else {
// update color in case it changed:
// FIXME: is there a more efficient way to do this?
for (int i=0; i<parentNode->childCount(); ++i) {
QSGGeometryNode* childNode = static_cast<QSGGeometryNode*>(parentNode->childAtIndex(i));
if (!childNode) continue;
QSGFlatColorMaterial* material = static_cast<QSGFlatColorMaterial*>(childNode->material());
if (!material) continue;
material->setColor(m_color);
}
}
// adapt child count:
int childCount = parentNode->childCount();
if (childCount < connectionCount) {
for (int i=0; i<(connectionCount - childCount); ++i) {
QSGGeometryNode* node = new QSGGeometryNode;
QSGGeometry* geometry = new QSGGeometry(QSGGeometry::defaultAttributes_Point2D(), 3);
geometry->setDrawingMode(GL_TRIANGLE_STRIP);
node->setGeometry(geometry);
node->setFlag(QSGNode::OwnsGeometry);
QSGFlatColorMaterial* material = new QSGFlatColorMaterial;
material->setColor(m_color);
node->setMaterial(material);
node->setFlag(QSGNode::OwnsMaterial);
parentNode->appendChildNode(node);
}
} else if (childCount > connectionCount) {
for (int i=0; i<(childCount - connectionCount); ++i) {
parentNode->removeChildNode(parentNode->childAtIndex(0));
}
}
Q_ASSERT(parentNode->childCount() == connectionCount);
// calculate common start point:
const QPointF p0(width(), height() / 2);
double widthOffset = m_lineWidth / 2;
//const QPointF posInScene = mapToScene(QPointF(0, 0));
for (int i=0; i<connectionCount; ++i) {
NodeBase* otherNode = connectedNodes[i];
if (!otherNode) continue;
QQuickItem* otherGuiItem = otherNode->getGuiItem();
if (!otherGuiItem) continue;
const QPointF p3 = mapFromItem(otherGuiItem, QPointF(-otherGuiItem->width() / 2, otherGuiItem->height() / 2));
int handleLength = std::max(50, std::min(int(p3.x() - p0.x()), 80));
const QPointF p1(p0.x() + handleLength, p0.y());
const QPointF p2(p3.x() - handleLength, p3.y());
// calculate reasonable segment count:
int segmentCount = qMax(16.0, qMin(qAbs(p3.y() - p0.y()) / 25, 50.0));
int verticesCount = segmentCount * 2;
QSGGeometryNode* qsgNode = static_cast<QSGGeometryNode*>(parentNode->childAtIndex(i));
if (!qsgNode) continue;
QSGGeometry* geometry = qsgNode->geometry();
if (!geometry) continue;
geometry->allocate(verticesCount);
QSGGeometry::Point2D* vertices = geometry->vertexDataAsPoint2D();
// triangulate cubic bezier curve:
for (int i = 0; i < segmentCount; ++i) {
// t is the position on the line:
const qreal t = i / qreal(segmentCount - 1);
// pos is the point on the curve at "t":
const QPointF pos = calculateBezierPoint(t, p0, p1, p2, p3);
// normal is the normal vector at that point
const QPointF normal = normalFromTangent(calculateBezierTangent(t, p0, p1, p2, p3));
// first is a point offsetted in the normal direction by lineWidth / 2 from pos
const QPointF first = pos - normal * widthOffset;
// ssecond is a point offsetted in the negative normal direction by lineWidth / 2 from pos
const QPointF second = pos + normal * widthOffset;
// add first and second as vertices to this geometry:
vertices[i*2].set(first.x(), first.y());
vertices[i*2+1].set(second.x(), second.y());
}
// tell Scene Graph that this items needs to be drawn:
qsgNode->markDirty(QSGNode::DirtyGeometry);
}
return parentNode;
}