void QgsMapToolAddCircularString::activate()
{
if ( mParentTool )
{
mParentTool->deleteTempRubberBand();
if ( mPoints.isEmpty() )
{
// if the parent tool has a curve, use its last point as the first point in this curve
const QgsCompoundCurveV2* compoundCurve = mParentTool->captureCurve();
if ( compoundCurve && compoundCurve->nCurves() > 0 )
{
const QgsCurveV2* curve = compoundCurve->curveAt( compoundCurve->nCurves() - 1 );
if ( curve )
{
//mParentTool->captureCurve() is in layer coordinates, but we need map coordinates
QgsPointV2 endPointLayerCoord = curve->endPoint();
QgsPoint mapPoint = toMapCoordinates( mCanvas->currentLayer(), QgsPoint( endPointLayerCoord.x(), endPointLayerCoord.y() ) );
mPoints.append( QgsPointV2( mapPoint ) );
if ( !mTempRubberBand )
{
mTempRubberBand = createGeometryRubberBand(( mode() == CapturePolygon ) ? Qgis::Polygon : Qgis::Line, true );
mTempRubberBand->show();
}
QgsCircularStringV2* c = new QgsCircularStringV2();
QgsPointSequenceV2 rubberBandPoints = mPoints;
rubberBandPoints.append( QgsPointV2( mapPoint ) );
c->setPoints( rubberBandPoints );
mTempRubberBand->setGeometry( c );
}
}
}
}
QgsMapToolCapture::activate();
}
void QgsCircularStringV2::addToPainterPath( QPainterPath& path ) const
{
int nPoints = numPoints();
if ( nPoints < 1 )
{
return;
}
if ( path.isEmpty() || path.currentPosition() != QPointF( mX[0], mY[0] ) )
{
path.moveTo( QPointF( mX[0], mY[0] ) );
}
for ( int i = 0; i < ( nPoints - 2 ) ; i += 2 )
{
QgsPointSequenceV2 pt;
segmentize( QgsPointV2( mX[i], mY[i] ), QgsPointV2( mX[i + 1], mY[i + 1] ), QgsPointV2( mX[i + 2], mY[i + 2] ), pt );
for ( int j = 1; j < pt.size(); ++j )
{
path.lineTo( pt.at( j ).x(), pt.at( j ).y() );
}
//arcTo( path, QPointF( mX[i], mY[i] ), QPointF( mX[i + 1], mY[i + 1] ), QPointF( mX[i + 2], mY[i + 2] ) );
}
//if number of points is even, connect to last point with straight line (even though the circular string is not valid)
if ( nPoints % 2 == 0 )
{
path.lineTo( mX[ nPoints - 1 ], mY[ nPoints - 1 ] );
}
}
QgsRectangle QgsCircularStringV2::segmentBoundingBox( const QgsPointV2& pt1, const QgsPointV2& pt2, const QgsPointV2& pt3 )
{
double centerX, centerY, radius;
QgsGeometryUtils::circleCenterRadius( pt1, pt2, pt3, radius, centerX, centerY );
double p1Angle = QgsGeometryUtils::ccwAngle( pt1.y() - centerY, pt1.x() - centerX );
if ( p1Angle > 360 )
{
p1Angle -= 360;
}
double p2Angle = QgsGeometryUtils::ccwAngle( pt2.y() - centerY, pt2.x() - centerX );
if ( p2Angle > 360 )
{
p2Angle -= 360;
}
double p3Angle = QgsGeometryUtils::ccwAngle( pt3.y() - centerY, pt3.x() - centerX );
if ( p3Angle > 360 )
{
p3Angle -= 360;
}
//start point, end point and compass points in between can be on bounding box
QgsRectangle bbox( pt1.x(), pt1.y(), pt1.x(), pt1.y() );
bbox.combineExtentWith( pt3.x(), pt3.y() );
QgsPointSequenceV2 compassPoints = compassPointsOnSegment( p1Angle, p2Angle, p3Angle, centerX, centerY, radius );
QgsPointSequenceV2::const_iterator cpIt = compassPoints.constBegin();
for ( ; cpIt != compassPoints.constEnd(); ++cpIt )
{
bbox.combineExtentWith( cpIt->x(), cpIt->y() );
}
return bbox;
}
void QgsCircularStringV2::points( QgsPointSequenceV2 &pts ) const
{
pts.clear();
int nPts = numPoints();
for ( int i = 0; i < nPts; ++i )
{
pts.push_back( pointN( i ) );
}
}
int QgsVectorLayerEditUtils::addRing( const QList<QgsPoint>& ring, const QgsFeatureIds& targetFeatureIds, QgsFeatureId* modifiedFeatureId )
{
QgsLineStringV2* ringLine = new QgsLineStringV2();
QgsPointSequenceV2 ringPoints;
QList<QgsPoint>::const_iterator ringIt = ring.constBegin();
for ( ; ringIt != ring.constEnd(); ++ringIt )
{
ringPoints.append( QgsPointV2( ringIt->x(), ringIt->y() ) );
}
ringLine->setPoints( ringPoints );
return addRing( ringLine, targetFeatureIds, modifiedFeatureId );
}
QgsLineStringV2* QgsGeometryFactory::linestringFromPolyline( const QgsPolyline& polyline )
{
QgsLineStringV2* line = new QgsLineStringV2();
QgsPointSequenceV2 points;
QgsPolyline::const_iterator it = polyline.constBegin();
for ( ; it != polyline.constEnd(); ++it )
{
points.append( QgsPointV2( it->x(), it->y() ) );
}
line->setPoints( points );
return line;
}
void QgsMapToolCircularStringCurvePoint::cadCanvasReleaseEvent( QgsMapMouseEvent* e )
{
QgsPointV2 mapPoint( e->mapPoint() );
if ( e->button() == Qt::LeftButton )
{
mPoints.append( mapPoint );
if ( !mCenterPointRubberBand && mShowCenterPointRubberBand )
{
createCenterPointRubberBand();
}
if ( !mPoints.isEmpty() )
{
if ( !mTempRubberBand )
{
mTempRubberBand = createGeometryRubberBand(( mode() == CapturePolygon ) ? QgsWkbTypes::PolygonGeometry : QgsWkbTypes::LineGeometry, true );
mTempRubberBand->show();
}
QgsCircularStringV2* c = new QgsCircularStringV2();
QgsPointSequenceV2 rubberBandPoints = mPoints.mid( mPoints.size() - 1 - ( mPoints.size() + 1 ) % 2 );
rubberBandPoints.append( mapPoint );
c->setPoints( rubberBandPoints );
mTempRubberBand->setGeometry( c );
}
if ( mPoints.size() > 1 && mPoints.size() % 2 )
{
if ( !mRubberBand )
{
mRubberBand = createGeometryRubberBand(( mode() == CapturePolygon ) ? QgsWkbTypes::PolygonGeometry : QgsWkbTypes::LineGeometry );
mRubberBand->show();
}
QgsCircularStringV2* c = new QgsCircularStringV2();
QgsPointSequenceV2 rubberBandPoints = mPoints;
rubberBandPoints.append( mapPoint );
c->setPoints( rubberBandPoints );
mRubberBand->setGeometry( c );
removeCenterPointRubberBand();
}
}
else if ( e->button() == Qt::RightButton )
{
deactivate();
if ( mParentTool )
{
mParentTool->canvasReleaseEvent( e );
}
}
}
void QgsCircularStringV2::setPoints( const QgsPointSequenceV2 &points )
{
clearCache();
if ( points.size() < 1 )
{
mWkbType = QgsWKBTypes::Unknown;
mX.clear();
mY.clear();
mZ.clear();
mM.clear();
return;
}
//get wkb type from first point
const QgsPointV2& firstPt = points.at( 0 );
bool hasZ = firstPt.is3D();
bool hasM = firstPt.isMeasure();
setZMTypeFromSubGeometry( &firstPt, QgsWKBTypes::CircularString );
mX.resize( points.size() );
mY.resize( points.size() );
if ( hasZ )
{
mZ.resize( points.size() );
}
else
{
mZ.clear();
}
if ( hasM )
{
mM.resize( points.size() );
}
else
{
mM.clear();
}
for ( int i = 0; i < points.size(); ++i )
{
mX[i] = points[i].x();
mY[i] = points[i].y();
if ( hasZ )
{
mZ[i] = points[i].z();
}
if ( hasM )
{
mM[i] = points[i].m();
}
}
}
void QgsMapToolAddCircularString::updateCenterPointRubberBand( const QgsPointV2& pt )
{
if ( !mShowCenterPointRubberBand || !mCenterPointRubberBand || mPoints.size() < 2 )
{
return;
}
if (( mPoints.size() ) % 2 != 0 )
{
return;
}
//create circular string
QgsCircularStringV2* cs = new QgsCircularStringV2();
QgsPointSequenceV2 csPoints;
csPoints.append( mPoints.at( mPoints.size() - 2 ) );
csPoints.append( mPoints.at( mPoints.size() - 1 ) );
csPoints.append( pt );
cs->setPoints( csPoints );
QgsPointV2 center;
double radius;
QgsGeometryUtils::circleCenterRadius( csPoints.at( 0 ), csPoints.at( 1 ), csPoints.at( 2 ), radius, center.rx(), center.ry() );
QgsLineStringV2* segment1 = new QgsLineStringV2();
segment1->addVertex( center );
segment1->addVertex( csPoints.at( 0 ) );
QgsLineStringV2* segment2 = new QgsLineStringV2();
segment2->addVertex( csPoints.at( 2 ) );
segment2->addVertex( center );
QgsCompoundCurveV2* cc = new QgsCompoundCurveV2();
cc->addCurve( segment1 );
cc->addCurve( cs );
cc->addCurve( segment2 );
QgsCurvePolygonV2* cp = new QgsCurvePolygonV2();
cp->setExteriorRing( cc );
mCenterPointRubberBand->setGeometry( cp );
mCenterPointRubberBand->show();
}
void QgsCircularStringV2::segmentize( const QgsPointV2& p1, const QgsPointV2& p2, const QgsPointV2& p3, QgsPointSequenceV2 &points, double tolerance, SegmentationToleranceType toleranceType ) const
{
//adapted code from postgis
double radius = 0;
double centerX = 0;
double centerY = 0;
QgsGeometryUtils::circleCenterRadius( p1, p2, p3, radius, centerX, centerY );
int segSide = segmentSide( p1, p3, p2 );
if ( p1 != p3 && ( radius < 0 || qgsDoubleNear( segSide, 0.0 ) ) ) //points are colinear
{
points.append( p1 );
points.append( p2 );
points.append( p3 );
return;
}
bool clockwise = false;
if ( segSide == -1 )
{
clockwise = true;
}
double increment = tolerance; //one segment per degree
if ( toleranceType == QgsAbstractGeometryV2::MaximumDifference )
{
double halfAngle = acos( -tolerance / radius + 1 );
increment = 2 * halfAngle;
}
//angles of pt1, pt2, pt3
double a1 = atan2( p1.y() - centerY, p1.x() - centerX );
double a2 = atan2( p2.y() - centerY, p2.x() - centerX );
double a3 = atan2( p3.y() - centerY, p3.x() - centerX );
if ( clockwise )
{
increment *= -1;
/* Adjust a3 down so we can decrement from a1 to a3 cleanly */
if ( a3 >= a1 )
a3 -= 2.0 * M_PI;
if ( a2 > a1 )
a2 -= 2.0 * M_PI;
}
else
{
/* Adjust a3 up so we can increment from a1 to a3 cleanly */
if ( a3 <= a1 )
a3 += 2.0 * M_PI;
if ( a2 < a1 )
a2 += 2.0 * M_PI;
}
bool hasZ = is3D();
bool hasM = isMeasure();
double x, y;
double z = 0;
double m = 0;
points.append( p1 );
if ( p2 != p3 && p1 != p2 ) //draw straight line segment if two points have the same position
{
QgsWKBTypes::Type pointWkbType = QgsWKBTypes::Point;
if ( hasZ )
pointWkbType = QgsWKBTypes::addZ( pointWkbType );
if ( hasM )
pointWkbType = QgsWKBTypes::addM( pointWkbType );
//make sure the curve point p2 is part of the segmentized vertices. But only if p1 != p3
bool addP2 = true;
if ( qgsDoubleNear( p1.x(), p3.x() ) && qgsDoubleNear( p1.y(), p3.y() ) )
{
addP2 = false;
}
for ( double angle = a1 + increment; clockwise ? angle > a3 : angle < a3; angle += increment )
{
if (( addP2 && clockwise && angle < a2 ) || ( addP2 && !clockwise && angle > a2 ) )
{
points.append( p2 );
addP2 = false;
}
x = centerX + radius * cos( angle );
y = centerY + radius * sin( angle );
if ( !hasZ && !hasM )
{
points.append( QgsPointV2( x, y ) );
continue;
}
if ( hasZ )
{
z = interpolateArc( angle, a1, a2, a3, p1.z(), p2.z(), p3.z() );
}
if ( hasM )
{
m = interpolateArc( angle, a1, a2, a3, p1.m(), p2.m(), p3.m() );
}
points.append( QgsPointV2( pointWkbType, x, y, z, m ) );
}
}
points.append( p3 );
}
QgsPointSequenceV2 QgsCircularStringV2::compassPointsOnSegment( double p1Angle, double p2Angle, double p3Angle, double centerX, double centerY, double radius )
{
QgsPointSequenceV2 pointList;
QgsPointV2 nPoint( centerX, centerY + radius );
QgsPointV2 ePoint( centerX + radius, centerY );
QgsPointV2 sPoint( centerX, centerY - radius );
QgsPointV2 wPoint( centerX - radius, centerY );
if ( p3Angle >= p1Angle )
{
if ( p2Angle > p1Angle && p2Angle < p3Angle )
{
if ( p1Angle <= 90 && p3Angle >= 90 )
{
pointList.append( nPoint );
}
if ( p1Angle <= 180 && p3Angle >= 180 )
{
pointList.append( wPoint );
}
if ( p1Angle <= 270 && p3Angle >= 270 )
{
pointList.append( sPoint );
}
}
else
{
pointList.append( ePoint );
if ( p1Angle >= 90 || p3Angle <= 90 )
{
pointList.append( nPoint );
}
if ( p1Angle >= 180 || p3Angle <= 180 )
{
pointList.append( wPoint );
}
if ( p1Angle >= 270 || p3Angle <= 270 )
{
pointList.append( sPoint );
}
}
}
else
{
if ( p2Angle < p1Angle && p2Angle > p3Angle )
{
if ( p1Angle >= 270 && p3Angle <= 270 )
{
pointList.append( sPoint );
}
if ( p1Angle >= 180 && p3Angle <= 180 )
{
pointList.append( wPoint );
}
if ( p1Angle >= 90 && p3Angle <= 90 )
{
pointList.append( nPoint );
}
}
else
{
pointList.append( ePoint );
if ( p1Angle <= 270 || p3Angle >= 270 )
{
pointList.append( sPoint );
}
if ( p1Angle <= 180 || p3Angle >= 180 )
{
pointList.append( wPoint );
}
if ( p1Angle <= 90 || p3Angle >= 90 )
{
pointList.append( nPoint );
}
}
}
return pointList;
}
bool QgsEllipseSymbolLayerV2::writeDxf( QgsDxfExport& e, double mmMapUnitScaleFactor, const QString& layerName, QgsSymbolV2RenderContext &context, QPointF shift ) const
{
//width
double symbolWidth = mSymbolWidth;
if ( hasDataDefinedProperty( QgsSymbolLayerV2::EXPR_WIDTH ) ) //1. priority: data defined setting on symbol layer le
{
context.setOriginalValueVariable( mSymbolWidth );
symbolWidth = evaluateDataDefinedProperty( QgsSymbolLayerV2::EXPR_WIDTH, context, mSymbolWidth ).toDouble();
}
else if ( context.renderHints() & QgsSymbolV2::DataDefinedSizeScale ) //2. priority: is data defined size on symbol level
{
symbolWidth = mSize;
}
if ( mSymbolWidthUnit == QgsSymbolV2::MM )
{
symbolWidth *= mmMapUnitScaleFactor;
}
//height
double symbolHeight = mSymbolHeight;
if ( hasDataDefinedProperty( QgsSymbolLayerV2::EXPR_HEIGHT ) ) //1. priority: data defined setting on symbol layer level
{
context.setOriginalValueVariable( mSymbolHeight );
symbolHeight = evaluateDataDefinedProperty( QgsSymbolLayerV2::EXPR_HEIGHT, context, mSymbolHeight ).toDouble();
}
else if ( context.renderHints() & QgsSymbolV2::DataDefinedSizeScale ) //2. priority: is data defined size on symbol level
{
symbolHeight = mSize;
}
if ( mSymbolHeightUnit == QgsSymbolV2::MM )
{
symbolHeight *= mmMapUnitScaleFactor;
}
//outline width
double outlineWidth = mOutlineWidth;
if ( hasDataDefinedProperty( QgsSymbolLayerV2::EXPR_OUTLINE_WIDTH ) )
{
context.setOriginalValueVariable( mOutlineWidth );
outlineWidth = evaluateDataDefinedProperty( QgsSymbolLayerV2::EXPR_OUTLINE_WIDTH, context, mOutlineWidth ).toDouble();
}
if ( mOutlineWidthUnit == QgsSymbolV2::MM )
{
outlineWidth *= outlineWidth;
}
//fill color
bool ok;
QColor fc = mColor;
if ( hasDataDefinedProperty( QgsSymbolLayerV2::EXPR_FILL_COLOR ) )
{
context.setOriginalValueVariable( QgsSymbolLayerV2Utils::encodeColor( mColor ) );
QString colorString = evaluateDataDefinedProperty( QgsSymbolLayerV2::EXPR_FILL_COLOR, context, QVariant(), &ok ).toString();
if ( ok )
fc = QgsSymbolLayerV2Utils::decodeColor( colorString );
}
//outline color
QColor oc = mOutlineColor;
if ( hasDataDefinedProperty( QgsSymbolLayerV2::EXPR_OUTLINE_COLOR ) )
{
context.setOriginalValueVariable( QgsSymbolLayerV2Utils::encodeColor( mOutlineColor ) );
QString colorString = evaluateDataDefinedProperty( QgsSymbolLayerV2::EXPR_OUTLINE_COLOR, context, QVariant(), &ok ).toString();
if ( ok )
oc = QgsSymbolLayerV2Utils::decodeColor( colorString );
}
//symbol name
QString symbolName = mSymbolName;
if ( hasDataDefinedProperty( QgsSymbolLayerV2::EXPR_SYMBOL_NAME ) )
{
context.setOriginalValueVariable( mSymbolName );
symbolName = evaluateDataDefinedProperty( QgsSymbolLayerV2::EXPR_SYMBOL_NAME, context, mSymbolName ).toString();
}
//offset
double offsetX = 0;
double offsetY = 0;
markerOffset( context, offsetX, offsetY );
QPointF off( offsetX, offsetY );
//priority for rotation: 1. data defined symbol level, 2. symbol layer rotation (mAngle)
double rotation = 0.0;
if ( hasDataDefinedProperty( QgsSymbolLayerV2::EXPR_ROTATION ) )
{
context.setOriginalValueVariable( mAngle );
rotation = evaluateDataDefinedProperty( QgsSymbolLayerV2::EXPR_ROTATION, context, mAngle ).toDouble() + mLineAngle;
}
else if ( !qgsDoubleNear( mAngle + mLineAngle, 0.0 ) )
{
rotation = mAngle + mLineAngle;
}
rotation = -rotation; //rotation in Qt is counterclockwise
if ( rotation )
off = _rotatedOffset( off, rotation );
QTransform t;
t.translate( shift.x() + offsetX, shift.y() + offsetY );
if ( !qgsDoubleNear( rotation, 0.0 ) )
t.rotate( rotation );
double halfWidth = symbolWidth / 2.0;
double halfHeight = symbolHeight / 2.0;
if ( symbolName == "circle" )
{
if ( qgsDoubleNear( halfWidth, halfHeight ) )
{
QgsPointV2 pt( t.map( QPointF( 0, 0 ) ) );
e.writeFilledCircle( layerName, oc, pt, halfWidth );
}
else
{
QgsPointSequenceV2 line;
double stepsize = 2 * M_PI / 40;
for ( int i = 0; i < 39; ++i )
{
double angle = stepsize * i;
double x = halfWidth * cos( angle );
double y = halfHeight * sin( angle );
line << QgsPointV2( t.map( QPointF( x, y ) ) );
}
//close ellipse with first point
line << line.at( 0 );
if ( mBrush.style() != Qt::NoBrush )
e.writePolygon( QgsRingSequenceV2() << line, layerName, "SOLID", fc );
if ( mPen.style() != Qt::NoPen )
e.writePolyline( line, layerName, "CONTINUOUS", oc, outlineWidth );
}
}
else if ( symbolName == "rectangle" )
{
QgsPointSequenceV2 p;
p << QgsPointV2( t.map( QPointF( -halfWidth, -halfHeight ) ) )
<< QgsPointV2( t.map( QPointF( halfWidth, -halfHeight ) ) )
<< QgsPointV2( t.map( QPointF( halfWidth, halfHeight ) ) )
<< QgsPointV2( t.map( QPointF( -halfWidth, halfHeight ) ) );
p << p[0];
if ( mBrush.style() != Qt::NoBrush )
e.writePolygon( QgsRingSequenceV2() << p, layerName, "SOLID", fc );
if ( mPen.style() != Qt::NoPen )
e.writePolyline( p, layerName, "CONTINUOUS", oc, outlineWidth );
return true;
}
else if ( symbolName == "cross" && mPen.style() != Qt::NoPen )
{
e.writePolyline( QgsPointSequenceV2()
<< QgsPointV2( t.map( QPointF( -halfWidth, 0 ) ) )
<< QgsPointV2( t.map( QPointF( halfWidth, 0 ) ) ),
layerName, "CONTINUOUS", oc, outlineWidth );
e.writePolyline( QgsPointSequenceV2()
<< QgsPointV2( t.map( QPointF( 0, halfHeight ) ) )
<< QgsPointV2( t.map( QPointF( 0, -halfHeight ) ) ),
layerName, "CONTINUOUS", oc, outlineWidth );
return true;
}
else if ( symbolName == "triangle" )
{
QgsPointSequenceV2 p;
p << QgsPointV2( t.map( QPointF( -halfWidth, -halfHeight ) ) )
<< QgsPointV2( t.map( QPointF( halfWidth, -halfHeight ) ) )
<< QgsPointV2( t.map( QPointF( 0, halfHeight ) ) );
p << p[0];
if ( mBrush.style() != Qt::NoBrush )
e.writePolygon( QgsRingSequenceV2() << p, layerName, "SOLID", fc );
if ( mPen.style() != Qt::NoPen )
e.writePolyline( p, layerName, "CONTINUOUS", oc, outlineWidth );
return true;
}
return false; //soon...
}
