void PCB_EDIT_FRAME::PutDataInPreviousState( PICKED_ITEMS_LIST* aList, bool aRedoCommand,
bool aRebuildRatsnet )
{
BOARD_ITEM* item;
bool not_found = false;
bool reBuild_ratsnest = false;
bool deep_reBuild_ratsnest = false;
KIGFX::VIEW* view = GetGalCanvas()->GetView();
RN_DATA* ratsnest = GetBoard()->GetRatsnest();
// Undo in the reverse order of list creation: (this can allow stacked changes
// like the same item can be changes and deleted in the same complex command
bool build_item_list = true; // if true the list of existing items must be rebuilt
for( int ii = aList->GetCount() - 1; ii >= 0 ; ii-- )
{
item = (BOARD_ITEM*) aList->GetPickedItem( ii );
wxASSERT( item );
/* Test for existence of item on board.
* It could be deleted, and no more on board:
* - if a call to SaveCopyInUndoList was forgotten in Pcbnew
* - in zones outlines, when a change in one zone merges this zone with an other
* This test avoids a Pcbnew crash
* Obviously, this test is not made for deleted items
*/
UNDO_REDO_T status = aList->GetPickedItemStatus( ii );
if( status != UR_DELETED )
{
if( build_item_list )
// Build list of existing items, for integrity test
TestForExistingItem( GetBoard(), NULL );
build_item_list = false;
if( !TestForExistingItem( GetBoard(), item ) )
{
// Remove this non existent item
aList->RemovePicker( ii );
ii++; // the current item was removed, ii points now the next item
// decrement it because it will be incremented later
not_found = true;
continue;
}
}
item->ClearFlags();
// see if we must rebuild ratsnets and pointers lists
switch( item->Type() )
{
case PCB_MODULE_T:
case PCB_ZONE_AREA_T:
case PCB_TRACE_T:
case PCB_VIA_T:
reBuild_ratsnest = true;
break;
case PCB_NETINFO_T:
reBuild_ratsnest = true;
deep_reBuild_ratsnest = true;
break;
default:
break;
}
switch( aList->GetPickedItemStatus( ii ) )
{
case UR_CHANGED: /* Exchange old and new data for each item */
{
BOARD_ITEM* image = (BOARD_ITEM*) aList->GetPickedItemLink( ii );
// Remove all pads/drawings/texts, as they become invalid
// for the VIEW after SwapData() called for modules
if( item->Type() == PCB_MODULE_T )
{
MODULE* oldModule = static_cast<MODULE*>( item );
oldModule->RunOnChildren( boost::bind( &KIGFX::VIEW::Remove, view, _1 ) );
}
view->Remove( item );
ratsnest->Remove( item );
item->SwapData( image );
// Update all pads/drawings/texts, as they become invalid
// for the VIEW after SwapData() called for modules
if( item->Type() == PCB_MODULE_T )
{
MODULE* newModule = static_cast<MODULE*>( item );
newModule->RunOnChildren( boost::bind( &KIGFX::VIEW::Add, view, _1 ) );
}
view->Add( item );
ratsnest->Add( item );
item->ClearFlags( SELECTED );
item->ViewUpdate( KIGFX::VIEW_ITEM::LAYERS );
}
break;
case UR_NEW: /* new items are deleted */
aList->SetPickedItemStatus( UR_DELETED, ii );
GetBoard()->Remove( item );
if( item->Type() == PCB_MODULE_T )
{
MODULE* module = static_cast<MODULE*>( item );
module->RunOnChildren( boost::bind( &KIGFX::VIEW::Remove, view, _1 ) );
}
view->Remove( item );
item->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
break;
case UR_DELETED: /* deleted items are put in List, as new items */
aList->SetPickedItemStatus( UR_NEW, ii );
GetBoard()->Add( item );
if( item->Type() == PCB_MODULE_T )
{
MODULE* module = static_cast<MODULE*>( item );
module->RunOnChildren( boost::bind( &KIGFX::VIEW::Add, view, _1) );
}
view->Add( item );
item->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
build_item_list = true;
break;
case UR_MOVED:
item->Move( aRedoCommand ? aList->m_TransformPoint : -aList->m_TransformPoint );
item->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
ratsnest->Update( item );
break;
case UR_ROTATED:
item->Rotate( aList->m_TransformPoint,
aRedoCommand ? m_rotationAngle : -m_rotationAngle );
item->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
ratsnest->Update( item );
break;
case UR_ROTATED_CLOCKWISE:
item->Rotate( aList->m_TransformPoint,
aRedoCommand ? -m_rotationAngle : m_rotationAngle );
item->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
ratsnest->Update( item );
break;
case UR_FLIPPED:
item->Flip( aList->m_TransformPoint );
item->ViewUpdate( KIGFX::VIEW_ITEM::LAYERS );
ratsnest->Update( item );
break;
default:
{
wxString msg;
msg.Printf( wxT( "PutDataInPreviousState() error (unknown code %X)" ),
aList->GetPickedItemStatus( ii ) );
wxMessageBox( msg );
}
break;
}
}
if( not_found )
wxMessageBox( wxT( "Incomplete undo/redo operation: some items not found" ) );
// Rebuild pointers and ratsnest that can be changed.
if( reBuild_ratsnest )
{
Compile_Ratsnest( NULL, true );
if( IsGalCanvasActive() )
{
if( deep_reBuild_ratsnest )
ratsnest->ProcessBoard();
else
ratsnest->Recalculate();
}
}
}
void PCB_EDIT_FRAME::ViewReloadBoard( const BOARD* aBoard ) const
{
KIGFX::VIEW* view = GetGalCanvas()->GetView();
view->Clear();
// All of PCB drawing elements should be added to the VIEW
// in order to be displayed
// Load zones
for( int i = 0; i < aBoard->GetAreaCount(); ++i )
{
view->Add( (KIGFX::VIEW_ITEM*) ( aBoard->GetArea( i ) ) );
}
// Load drawings
for( BOARD_ITEM* drawing = aBoard->m_Drawings; drawing; drawing = drawing->Next() )
{
view->Add( drawing );
}
// Load tracks
for( TRACK* track = aBoard->m_Track; track; track = track->Next() )
{
view->Add( track );
}
// Load modules and its additional elements
for( MODULE* module = aBoard->m_Modules; module; module = module->Next() )
{
// Load module's pads
for( D_PAD* pad = module->Pads().GetFirst(); pad; pad = pad->Next() )
{
view->Add( pad );
}
// Load module's drawing (mostly silkscreen)
for( BOARD_ITEM* drawing = module->GraphicalItems().GetFirst(); drawing;
drawing = drawing->Next() )
{
view->Add( drawing );
}
// Load module's texts (name and value)
view->Add( &module->Reference() );
view->Add( &module->Value() );
// Add the module itself
view->Add( module );
}
// Segzones (equivalent of ZONE_CONTAINER for legacy boards)
for( SEGZONE* zone = aBoard->m_Zone; zone; zone = zone->Next() )
{
view->Add( zone );
}
// Add an entry for the worksheet layout
KIGFX::WORKSHEET_VIEWITEM* worksheet = new KIGFX::WORKSHEET_VIEWITEM(
std::string( aBoard->GetFileName().mb_str() ),
std::string( GetScreenDesc().mb_str() ),
&GetPageSettings(), &GetTitleBlock() );
BASE_SCREEN* screen = GetScreen();
if( screen != NULL )
{
worksheet->SetSheetNumber( GetScreen()->m_ScreenNumber );
worksheet->SetSheetCount( GetScreen()->m_NumberOfScreens );
}
view->Add( worksheet );
// Add an entry for the ratsnest
RN_DATA* ratsnest = aBoard->GetRatsnest();
ratsnest->ProcessBoard();
ratsnest->Recalculate();
view->Add( new KIGFX::RATSNEST_VIEWITEM( ratsnest ) );
view->SetPanBoundary( worksheet->ViewBBox() );
view->RecacheAllItems( true );
if( IsGalCanvasActive() )
GetGalCanvas()->Refresh();
}
