void CSMSettings::UserSettings::buildSettingModelDefaults()
{
QString section;
declareSection ("3d-render", "3D Rendering");
{
Setting *shaders = createSetting (Type_CheckBox, "shaders", "Enable Shaders");
shaders->setDefaultValue ("true");
Setting *farClipDist = createSetting (Type_DoubleSpinBox, "far-clip-distance", "Far clipping distance");
farClipDist->setDefaultValue (300000);
farClipDist->setRange (0, 1000000);
farClipDist->setToolTip ("The maximum distance objects are still rendered at.");
QString defaultValue = "None";
Setting *antialiasing = createSetting (Type_ComboBox, "antialiasing", "Antialiasing");
antialiasing->setDeclaredValues (QStringList()
<< defaultValue << "MSAA 2" << "MSAA 4" << "MSAA 8" << "MSAA 16");
antialiasing->setDefaultValue (defaultValue);
}
declareSection ("3d-render-adv", "3D Rendering (Advanced)");
{
Setting *numLights = createSetting (Type_SpinBox, "num_lights",
"Number of lights per pass");
numLights->setDefaultValue (8);
numLights->setRange (1, 100);
}
declareSection ("scene-input", "Scene Input");
{
Setting *timer = createSetting (Type_SpinBox, "timer", "Input responsiveness");
timer->setDefaultValue (20);
timer->setRange (1, 100);
timer->setToolTip ("The time between two checks for user input in milliseconds.<p>"
"Lower value result in higher responsiveness.");
Setting *fastFactor = createSetting (Type_SpinBox, "fast-factor",
"Fast movement factor");
fastFactor->setDefaultValue (4);
fastFactor->setRange (1, 100);
fastFactor->setToolTip (
"Factor by which movement is speed up while the shift key is held down.");
}
declareSection ("window", "Window");
{
Setting *preDefined = createSetting (Type_ComboBox, "pre-defined",
"Default window size");
preDefined->setEditorSetting (false);
preDefined->setDeclaredValues (
QStringList() << "640 x 480" << "800 x 600" << "1024 x 768" << "1440 x 900");
preDefined->setViewLocation (1, 1);
preDefined->setColumnSpan (2);
preDefined->setToolTip ("Newly opened top-level windows will open with this size "
"(picked from a list of pre-defined values)");
Setting *width = createSetting (Type_LineEdit, "default-width",
"Default window width");
width->setDefaultValues (QStringList() << "1024");
width->setViewLocation (2, 1);
width->setColumnSpan (1);
width->setToolTip ("Newly opened top-level windows will open with this width.");
preDefined->addProxy (width, QStringList() << "640" << "800" << "1024" << "1440");
Setting *height = createSetting (Type_LineEdit, "default-height",
"Default window height");
height->setDefaultValues (QStringList() << "768");
height->setViewLocation (2, 2);
height->setColumnSpan (1);
height->setToolTip ("Newly opened top-level windows will open with this height.");
preDefined->addProxy (height, QStringList() << "480" << "600" << "768" << "900");
Setting *reuse = createSetting (Type_CheckBox, "reuse", "Reuse Subviews");
reuse->setDefaultValue ("true");
reuse->setToolTip ("When a new subview is requested and a matching subview already "
" exist, do not open a new subview and use the existing one instead.");
Setting *statusBar = createSetting (Type_CheckBox, "show-statusbar", "Show Status Bar");
statusBar->setDefaultValue ("true");
statusBar->setToolTip ("If a newly open top level window is showing status bars or not. "
" Note that this does not affect existing windows.");
Setting *maxSubView = createSetting (Type_SpinBox, "max-subviews",
"Maximum number of subviews per top-level window");
maxSubView->setDefaultValue (256);
maxSubView->setRange (1, 256);
maxSubView->setToolTip ("If the maximum number is reached and a new subview is opened "
"it will be placed into a new top-level window.");
Setting *hide = createSetting (Type_CheckBox, "hide-subview", "Hide single subview");
hide->setDefaultValue ("false");
hide->setToolTip ("When a view contains only a single subview, hide the subview title "
"bar and if this subview is closed also close the view (unless it is the last "
"view for this document)");
Setting *minWidth = createSetting (Type_SpinBox, "minimum-width",
"Minimum subview width");
minWidth->setDefaultValue (325);
minWidth->setRange (50, 10000);
minWidth->setToolTip ("Minimum width of subviews.");
}
declareSection ("records", "Records");
{
QString defaultValue = "Icon and Text";
QStringList values = QStringList() << defaultValue << "Icon Only" << "Text Only";
Setting *rsd = createSetting (Type_RadioButton, "status-format",
"Modification status display format");
rsd->setDefaultValue (defaultValue);
rsd->setDeclaredValues (values);
Setting *ritd = createSetting (Type_RadioButton, "type-format",
"ID type display format");
ritd->setDefaultValue (defaultValue);
ritd->setDeclaredValues (values);
}
declareSection ("table-input", "Table Input");
{
QString inPlaceEdit ("Edit in Place");
QString editRecord ("Edit Record");
QString view ("View");
QString editRecordAndClose ("Edit Record and Close");
QStringList values;
values
<< "None" << inPlaceEdit << editRecord << view << "Revert" << "Delete"
<< editRecordAndClose << "View and Close";
QString toolTip = "<ul>"
"<li>None</li>"
"<li>Edit in Place: Edit the clicked cell</li>"
"<li>Edit Record: Open a dialogue subview for the clicked record</li>"
"<li>View: Open a scene subview for the clicked record (not available everywhere)</li>"
"<li>Revert: Revert record</li>"
"<li>Delete: Delete recordy</li>"
"<li>Edit Record and Close: Open a dialogue subview for the clicked record and close the table subview</li>"
"<li>View And Close: Open a scene subview for the clicked record and close the table subview</li>"
"</ul>";
Setting *doubleClick = createSetting (Type_ComboBox, "double", "Double Click");
doubleClick->setDeclaredValues (values);
doubleClick->setDefaultValue (inPlaceEdit);
doubleClick->setToolTip ("Action on double click in table:<p>" + toolTip);
Setting *shiftDoubleClick = createSetting (Type_ComboBox, "double-s",
"Shift Double Click");
shiftDoubleClick->setDeclaredValues (values);
shiftDoubleClick->setDefaultValue (editRecord);
shiftDoubleClick->setToolTip ("Action on shift double click in table:<p>" + toolTip);
Setting *ctrlDoubleClick = createSetting (Type_ComboBox, "double-c",
"Control Double Click");
ctrlDoubleClick->setDeclaredValues (values);
ctrlDoubleClick->setDefaultValue (view);
ctrlDoubleClick->setToolTip ("Action on control double click in table:<p>" + toolTip);
Setting *shiftCtrlDoubleClick = createSetting (Type_ComboBox, "double-sc",
"Shift Control Double Click");
shiftCtrlDoubleClick->setDeclaredValues (values);
shiftCtrlDoubleClick->setDefaultValue (editRecordAndClose);
shiftCtrlDoubleClick->setToolTip ("Action on shift control double click in table:<p>" + toolTip);
}
{
/******************************************************************
* There are three types of values:
*
* Declared values
*
* Pre-determined values, typically for
* combobox drop downs and boolean (radiobutton / checkbox) labels.
* These values represent the total possible list of values that
* may define a setting. No other values are allowed.
*
* Defined values
*
* Values which represent the actual, current value of
* a setting. For settings with declared values, this must be one
* or several declared values, as appropriate.
*
* Proxy values
* Values the proxy master updates the proxy slave when
* it's own definition is set / changed. These are definitions for
* proxy slave settings, but must match any declared values the
* proxy slave has, if any.
*******************************************************************/
/*
//create setting objects, specifying the basic widget type,
//the page name, and the view name
Setting *masterBoolean = createSetting (Type_RadioButton, section,
"Master Proxy");
Setting *slaveBoolean = createSetting (Type_CheckBox, section,
"Proxy Checkboxes");
Setting *slaveSingleText = createSetting (Type_LineEdit, section,
"Proxy TextBox 1");
Setting *slaveMultiText = createSetting (Type_LineEdit, section,
"ProxyTextBox 2");
Setting *slaveAlphaSpinbox = createSetting (Type_SpinBox, section,
"Alpha Spinbox");
Setting *slaveIntegerSpinbox = createSetting (Type_SpinBox, section,
"Int Spinbox");
Setting *slaveDoubleSpinbox = createSetting (Type_DoubleSpinBox,
section, "Double Spinbox");
Setting *slaveSlider = createSetting (Type_Slider, section, "Slider");
Setting *slaveDial = createSetting (Type_Dial, section, "Dial");
//set declared values for selected views
masterBoolean->setDeclaredValues (QStringList()
<< "Profile One" << "Profile Two"
<< "Profile Three" << "Profile Four");
slaveBoolean->setDeclaredValues (QStringList()
<< "One" << "Two" << "Three" << "Four" << "Five");
slaveAlphaSpinbox->setDeclaredValues (QStringList()
<< "One" << "Two" << "Three" << "Four");
masterBoolean->addProxy (slaveBoolean, QList <QStringList>()
<< (QStringList() << "One" << "Three")
<< (QStringList() << "One" << "Three")
<< (QStringList() << "One" << "Three" << "Five")
<< (QStringList() << "Two" << "Four")
);
masterBoolean->addProxy (slaveSingleText, QList <QStringList>()
<< (QStringList() << "Text A")
<< (QStringList() << "Text B")
<< (QStringList() << "Text A")
<< (QStringList() << "Text C")
);
masterBoolean->addProxy (slaveMultiText, QList <QStringList>()
<< (QStringList() << "One" << "Three")
<< (QStringList() << "One" << "Three")
<< (QStringList() << "One" << "Three" << "Five")
<< (QStringList() << "Two" << "Four")
);
masterBoolean->addProxy (slaveAlphaSpinbox, QList <QStringList>()
<< (QStringList() << "Four")
<< (QStringList() << "Three")
<< (QStringList() << "Two")
<< (QStringList() << "One"));
masterBoolean->addProxy (slaveIntegerSpinbox, QList <QStringList> ()
<< (QStringList() << "0")
<< (QStringList() << "7")
<< (QStringList() << "14")
<< (QStringList() << "21"));
masterBoolean->addProxy (slaveDoubleSpinbox, QList <QStringList> ()
<< (QStringList() << "0.17")
<< (QStringList() << "0.34")
<< (QStringList() << "0.51")
<< (QStringList() << "0.68"));
masterBoolean->addProxy (slaveSlider, QList <QStringList> ()
<< (QStringList() << "25")
<< (QStringList() << "50")
<< (QStringList() << "75")
<< (QStringList() << "100")
);
masterBoolean->addProxy (slaveDial, QList <QStringList> ()
<< (QStringList() << "25")
<< (QStringList() << "50")
<< (QStringList() << "75")
<< (QStringList() << "100")
);
//settings with proxies are not serialized by default
//other settings non-serialized for demo purposes
slaveBoolean->setSerializable (false);
slaveSingleText->setSerializable (false);
slaveMultiText->setSerializable (false);
slaveAlphaSpinbox->setSerializable (false);
slaveIntegerSpinbox->setSerializable (false);
slaveDoubleSpinbox->setSerializable (false);
slaveSlider->setSerializable (false);
slaveDial->setSerializable (false);
slaveBoolean->setDefaultValues (QStringList()
<< "One" << "Three" << "Five");
slaveSingleText->setDefaultValue ("Text A");
slaveMultiText->setDefaultValues (QStringList()
<< "One" << "Three" << "Five");
slaveSingleText->setWidgetWidth (24);
slaveMultiText->setWidgetWidth (24);
slaveAlphaSpinbox->setDefaultValue ("Two");
slaveAlphaSpinbox->setWidgetWidth (20);
//slaveAlphaSpinbox->setPrefix ("No. ");
//slaveAlphaSpinbox->setSuffix ("!");
slaveAlphaSpinbox->setWrapping (true);
slaveIntegerSpinbox->setDefaultValue (14);
slaveIntegerSpinbox->setMinimum (0);
slaveIntegerSpinbox->setMaximum (58);
slaveIntegerSpinbox->setPrefix ("$");
slaveIntegerSpinbox->setSuffix (".00");
slaveIntegerSpinbox->setWidgetWidth (10);
slaveIntegerSpinbox->setSpecialValueText ("Nothing!");
slaveDoubleSpinbox->setDefaultValue (0.51);
slaveDoubleSpinbox->setSingleStep(0.17);
slaveDoubleSpinbox->setMaximum(4.0);
slaveSlider->setMinimum (0);
slaveSlider->setMaximum (100);
slaveSlider->setDefaultValue (75);
slaveSlider->setWidgetWidth (100);
slaveSlider->setTicksAbove (true);
slaveSlider->setTickInterval (25);
slaveDial->setMinimum (0);
slaveDial->setMaximum (100);
slaveDial->setSingleStep (5);
slaveDial->setDefaultValue (75);
slaveDial->setTickInterval (25);
*/
}
}
void CSMSettings::UserSettings::buildSettingModelDefaults()
{
/*
declareSection ("3d-render", "3D Rendering");
{
Setting *farClipDist = createSetting (Type_DoubleSpinBox, "far-clip-distance", "Far clipping distance");
farClipDist->setDefaultValue (300000);
farClipDist->setRange (0, 1000000);
farClipDist->setToolTip ("The maximum distance objects are still rendered at.");
QString defaultValue = "None";
Setting *antialiasing = createSetting (Type_ComboBox, "antialiasing", "Antialiasing");
antialiasing->setDeclaredValues (QStringList()
<< defaultValue << "MSAA 2" << "MSAA 4" << "MSAA 8" << "MSAA 16");
antialiasing->setDefaultValue (defaultValue);
}
*/
/*
declareSection ("scene-input", "Scene Input");
{
Setting *fastFactor = createSetting (Type_SpinBox, "fast-factor",
"Fast movement factor");
fastFactor->setDefaultValue (4);
fastFactor->setRange (1, 100);
fastFactor->setToolTip (
"Factor by which movement is speed up while the shift key is held down.");
}
*/
declareSection ("window", "Window");
{
Setting *preDefined = createSetting (Type_ComboBox, "pre-defined",
"Default window size");
preDefined->setEditorSetting (false);
preDefined->setDeclaredValues (
QStringList() << "640 x 480" << "800 x 600" << "1024 x 768" << "1440 x 900");
preDefined->setViewLocation (1, 1);
preDefined->setColumnSpan (2);
preDefined->setToolTip ("Newly opened top-level windows will open with this size "
"(picked from a list of pre-defined values)");
Setting *width = createSetting (Type_LineEdit, "default-width",
"Default window width");
width->setDefaultValues (QStringList() << "1024");
width->setViewLocation (2, 1);
width->setColumnSpan (1);
width->setToolTip ("Newly opened top-level windows will open with this width.");
preDefined->addProxy (width, QStringList() << "640" << "800" << "1024" << "1440");
Setting *height = createSetting (Type_LineEdit, "default-height",
"Default window height");
height->setDefaultValues (QStringList() << "768");
height->setViewLocation (2, 2);
height->setColumnSpan (1);
height->setToolTip ("Newly opened top-level windows will open with this height.");
preDefined->addProxy (height, QStringList() << "480" << "600" << "768" << "900");
Setting *reuse = createSetting (Type_CheckBox, "reuse", "Reuse Subviews");
reuse->setDefaultValue ("true");
reuse->setToolTip ("When a new subview is requested and a matching subview already "
" exist, do not open a new subview and use the existing one instead.");
Setting *statusBar = createSetting (Type_CheckBox, "show-statusbar", "Show Status Bar");
statusBar->setDefaultValue ("true");
statusBar->setToolTip ("If a newly open top level window is showing status bars or not. "
" Note that this does not affect existing windows.");
Setting *maxSubView = createSetting (Type_SpinBox, "max-subviews",
"Maximum number of subviews per top-level window");
maxSubView->setDefaultValue (256);
maxSubView->setRange (1, 256);
maxSubView->setToolTip ("If the maximum number is reached and a new subview is opened "
"it will be placed into a new top-level window.");
Setting *hide = createSetting (Type_CheckBox, "hide-subview", "Hide single subview");
hide->setDefaultValue ("false");
hide->setToolTip ("When a view contains only a single subview, hide the subview title "
"bar and if this subview is closed also close the view (unless it is the last "
"view for this document)");
Setting *minWidth = createSetting (Type_SpinBox, "minimum-width",
"Minimum subview width");
minWidth->setDefaultValue (325);
minWidth->setRange (50, 10000);
minWidth->setToolTip ("Minimum width of subviews.");
QString defaultScroll = "Scrollbar Only";
QStringList scrollValues = QStringList() << defaultScroll << "Grow Only" << "Grow then Scroll";
Setting *mainwinScroll = createSetting (Type_RadioButton, "mainwindow-scrollbar",
"Add a horizontal scrollbar to the main view window.");
mainwinScroll->setDefaultValue (defaultScroll);
mainwinScroll->setDeclaredValues (scrollValues);
mainwinScroll->setToolTip ("Scrollbar Only: Simple addition of scrollbars, the view window does not grow"
" automatically.\n"
"Grow Only: Original Editor behaviour. The view window grows as subviews are added. No scrollbars.\n"
"Grow then Scroll: The view window grows. The scrollbar appears once it cannot grow any further.");
Setting *grow = createSetting (Type_CheckBox, "grow-limit", "Grow Limit Screen");
grow->setDefaultValue ("false");
grow->setToolTip ("When \"Grow then Scroll\" option is selected, the window size grows to"
" the width of the virtual desktop. \nIf this option is selected the the window growth"
"is limited to the current screen.");
}
declareSection ("records", "Records");
{
QString defaultValue = "Icon and Text";
QStringList values = QStringList() << defaultValue << "Icon Only" << "Text Only";
Setting *rsd = createSetting (Type_RadioButton, "status-format",
"Modification status display format");
rsd->setDefaultValue (defaultValue);
rsd->setDeclaredValues (values);
Setting *ritd = createSetting (Type_RadioButton, "type-format",
"ID type display format");
ritd->setDefaultValue (defaultValue);
ritd->setDeclaredValues (values);
}
declareSection ("table-input", "ID Tables");
{
QString inPlaceEdit ("Edit in Place");
QString editRecord ("Edit Record");
QString view ("View");
QString editRecordAndClose ("Edit Record and Close");
QStringList values;
values
<< "None" << inPlaceEdit << editRecord << view << "Revert" << "Delete"
<< editRecordAndClose << "View and Close";
QString toolTip = "<ul>"
"<li>None</li>"
"<li>Edit in Place: Edit the clicked cell</li>"
"<li>Edit Record: Open a dialogue subview for the clicked record</li>"
"<li>View: Open a scene subview for the clicked record (not available everywhere)</li>"
"<li>Revert: Revert record</li>"
"<li>Delete: Delete recordy</li>"
"<li>Edit Record and Close: Open a dialogue subview for the clicked record and close the table subview</li>"
"<li>View And Close: Open a scene subview for the clicked record and close the table subview</li>"
"</ul>";
Setting *doubleClick = createSetting (Type_ComboBox, "double", "Double Click");
doubleClick->setDeclaredValues (values);
doubleClick->setDefaultValue (inPlaceEdit);
doubleClick->setToolTip ("Action on double click in table:<p>" + toolTip);
Setting *shiftDoubleClick = createSetting (Type_ComboBox, "double-s",
"Shift Double Click");
shiftDoubleClick->setDeclaredValues (values);
shiftDoubleClick->setDefaultValue (editRecord);
shiftDoubleClick->setToolTip ("Action on shift double click in table:<p>" + toolTip);
Setting *ctrlDoubleClick = createSetting (Type_ComboBox, "double-c",
"Control Double Click");
ctrlDoubleClick->setDeclaredValues (values);
ctrlDoubleClick->setDefaultValue (view);
ctrlDoubleClick->setToolTip ("Action on control double click in table:<p>" + toolTip);
Setting *shiftCtrlDoubleClick = createSetting (Type_ComboBox, "double-sc",
"Shift Control Double Click");
shiftCtrlDoubleClick->setDeclaredValues (values);
shiftCtrlDoubleClick->setDefaultValue (editRecordAndClose);
shiftCtrlDoubleClick->setToolTip ("Action on shift control double click in table:<p>" + toolTip);
QString defaultValue = "Jump and Select";
QStringList jumpValues = QStringList() << defaultValue << "Jump Only" << "No Jump";
Setting *jumpToAdded = createSetting (Type_RadioButton, "jump-to-added",
"Jump to the added or cloned record.");
jumpToAdded->setDefaultValue (defaultValue);
jumpToAdded->setDeclaredValues (jumpValues);
Setting *extendedConfig = createSetting (Type_CheckBox, "extended-config",
"Manually specify affected record types for an extended delete/revert");
extendedConfig->setDefaultValue("false");
extendedConfig->setToolTip("Delete and revert commands have an extended form that also affects "
"associated records.\n\n"
"If this option is enabled, types of affected records are selected "
"manually before a command execution.\nOtherwise, all associated "
"records are deleted/reverted immediately.");
}
declareSection ("dialogues", "ID Dialogues");
{
Setting *toolbar = createSetting (Type_CheckBox, "toolbar", "Show toolbar");
toolbar->setDefaultValue ("true");
}
declareSection ("report-input", "Reports");
{
QString none ("None");
QString edit ("Edit");
QString remove ("Remove");
QString editAndRemove ("Edit And Remove");
QStringList values;
values << none << edit << remove << editAndRemove;
QString toolTip = "<ul>"
"<li>None</li>"
"<li>Edit: Open a table or dialogue suitable for addressing the listed report</li>"
"<li>Remove: Remove the report from the report table</li>"
"<li>Edit and Remove: Open a table or dialogue suitable for addressing the listed report, then remove the report from the report table</li>"
"</ul>";
Setting *doubleClick = createSetting (Type_ComboBox, "double", "Double Click");
doubleClick->setDeclaredValues (values);
doubleClick->setDefaultValue (edit);
doubleClick->setToolTip ("Action on double click in report table:<p>" + toolTip);
Setting *shiftDoubleClick = createSetting (Type_ComboBox, "double-s",
"Shift Double Click");
shiftDoubleClick->setDeclaredValues (values);
shiftDoubleClick->setDefaultValue (remove);
shiftDoubleClick->setToolTip ("Action on shift double click in report table:<p>" + toolTip);
Setting *ctrlDoubleClick = createSetting (Type_ComboBox, "double-c",
"Control Double Click");
ctrlDoubleClick->setDeclaredValues (values);
ctrlDoubleClick->setDefaultValue (editAndRemove);
ctrlDoubleClick->setToolTip ("Action on control double click in report table:<p>" + toolTip);
Setting *shiftCtrlDoubleClick = createSetting (Type_ComboBox, "double-sc",
"Shift Control Double Click");
shiftCtrlDoubleClick->setDeclaredValues (values);
shiftCtrlDoubleClick->setDefaultValue (none);
shiftCtrlDoubleClick->setToolTip ("Action on shift control double click in report table:<p>" + toolTip);
}
declareSection ("search", "Search & Replace");
{
Setting *before = createSetting (Type_SpinBox, "char-before",
"Characters before search string");
before->setDefaultValue (10);
before->setRange (0, 1000);
before->setToolTip ("Maximum number of character to display in search result before the searched text");
Setting *after = createSetting (Type_SpinBox, "char-after",
"Characters after search string");
after->setDefaultValue (10);
after->setRange (0, 1000);
after->setToolTip ("Maximum number of character to display in search result after the searched text");
Setting *autoDelete = createSetting (Type_CheckBox, "auto-delete", "Delete row from result table after a successful replace");
autoDelete->setDefaultValue ("true");
}
declareSection ("script-editor", "Scripts");
{
Setting *lineNum = createSetting (Type_CheckBox, "show-linenum", "Show Line Numbers");
lineNum->setDefaultValue ("true");
lineNum->setToolTip ("Show line numbers to the left of the script editor window."
"The current row and column numbers of the text cursor are shown at the bottom.");
Setting *monoFont = createSetting (Type_CheckBox, "mono-font", "Use monospace font");
monoFont->setDefaultValue ("true");
monoFont->setToolTip ("Whether to use monospaced fonts on script edit subview.");
QString tooltip =
"\n#RGB (each of R, G, and B is a single hex digit)"
"\n#RRGGBB"
"\n#RRRGGGBBB"
"\n#RRRRGGGGBBBB"
"\nA name from the list of colors defined in the list of SVG color keyword names."
"\nX11 color names may also work.";
QString modeNormal ("Normal");
QStringList modes;
modes << "Ignore" << modeNormal << "Strict";
Setting *warnings = createSetting (Type_ComboBox, "warnings",
"Warning Mode");
warnings->setDeclaredValues (modes);
warnings->setDefaultValue (modeNormal);
warnings->setToolTip ("<ul>How to handle warning messages during compilation:<p>"
"<li>Ignore: Do not report warning</li>"
"<li>Normal: Report warning as a warning</li>"
"<li>Strict: Promote warning to an error</li>"
"</ul>");
Setting *toolbar = createSetting (Type_CheckBox, "toolbar", "Show toolbar");
toolbar->setDefaultValue ("true");
Setting *delay = createSetting (Type_SpinBox, "compile-delay",
"Delay between updating of source errors");
delay->setDefaultValue (100);
delay->setRange (0, 10000);
delay->setToolTip ("Delay in milliseconds");
Setting *errorHeight = createSetting (Type_SpinBox, "error-height",
"Initial height of the error panel");
errorHeight->setDefaultValue (100);
errorHeight->setRange (100, 10000);
Setting *formatInt = createSetting (Type_LineEdit, "colour-int", "Highlight Colour: Int");
formatInt->setDefaultValues (QStringList() << "Dark magenta");
formatInt->setToolTip ("(Default: Green) Use one of the following formats:" + tooltip);
Setting *formatFloat = createSetting (Type_LineEdit, "colour-float", "Highlight Colour: Float");
formatFloat->setDefaultValues (QStringList() << "Magenta");
formatFloat->setToolTip ("(Default: Magenta) Use one of the following formats:" + tooltip);
Setting *formatName = createSetting (Type_LineEdit, "colour-name", "Highlight Colour: Name");
formatName->setDefaultValues (QStringList() << "Gray");
formatName->setToolTip ("(Default: Gray) Use one of the following formats:" + tooltip);
Setting *formatKeyword = createSetting (Type_LineEdit, "colour-keyword", "Highlight Colour: Keyword");
formatKeyword->setDefaultValues (QStringList() << "Red");
formatKeyword->setToolTip ("(Default: Red) Use one of the following formats:" + tooltip);
Setting *formatSpecial = createSetting (Type_LineEdit, "colour-special", "Highlight Colour: Special");
formatSpecial->setDefaultValues (QStringList() << "Dark yellow");
formatSpecial->setToolTip ("(Default: Dark yellow) Use one of the following formats:" + tooltip);
Setting *formatComment = createSetting (Type_LineEdit, "colour-comment", "Highlight Colour: Comment");
formatComment->setDefaultValues (QStringList() << "Green");
formatComment->setToolTip ("(Default: Green) Use one of the following formats:" + tooltip);
Setting *formatId = createSetting (Type_LineEdit, "colour-id", "Highlight Colour: Id");
formatId->setDefaultValues (QStringList() << "Blue");
formatId->setToolTip ("(Default: Blue) Use one of the following formats:" + tooltip);
}
declareSection ("general-input", "General Input");
{
Setting *cycle = createSetting (Type_CheckBox, "cycle", "Cyclic next/previous");
cycle->setDefaultValue ("false");
cycle->setToolTip ("When using next/previous functions at the last/first item of a "
"list go to the first/last item");
}
declareSection ("scene-input", "3D Scene Input");
{
QString left ("Left Mouse-Button");
QString cLeft ("Ctrl-Left Mouse-Button");
QString right ("Right Mouse-Button");
QString cRight ("Ctrl-Right Mouse-Button");
QString middle ("Middle Mouse-Button");
QString cMiddle ("Ctrl-Middle Mouse-Button");
QStringList values;
values << left << cLeft << right << cRight << middle << cMiddle;
Setting *primaryNavigation = createSetting (Type_ComboBox, "p-navi", "Primary Camera Navigation Button");
primaryNavigation->setDeclaredValues (values);
primaryNavigation->setDefaultValue (left);
Setting *secondaryNavigation = createSetting (Type_ComboBox, "s-navi", "Secondary Camera Navigation Button");
secondaryNavigation->setDeclaredValues (values);
secondaryNavigation->setDefaultValue (cLeft);
Setting *primaryEditing = createSetting (Type_ComboBox, "p-edit", "Primary Editing Button");
primaryEditing->setDeclaredValues (values);
primaryEditing->setDefaultValue (right);
Setting *secondaryEditing = createSetting (Type_ComboBox, "s-edit", "Secondary Editing Button");
secondaryEditing->setDeclaredValues (values);
secondaryEditing->setDefaultValue (cRight);
Setting *primarySelection = createSetting (Type_ComboBox, "p-select", "Selection Button");
primarySelection->setDeclaredValues (values);
primarySelection->setDefaultValue (middle);
Setting *secondarySelection = createSetting (Type_ComboBox, "s-select", "Selection Button");
secondarySelection->setDeclaredValues (values);
secondarySelection->setDefaultValue (cMiddle);
Setting *contextSensitive = createSetting (Type_CheckBox, "context-select", "Context Sensitive Selection");
contextSensitive->setDefaultValue ("false");
Setting *dragMouseSensitivity = createSetting (Type_DoubleSpinBox, "drag-factor",
"Mouse sensitivity during drag operations");
dragMouseSensitivity->setDefaultValue (1.0);
dragMouseSensitivity->setRange (0.001, 100.0);
Setting *dragWheelSensitivity = createSetting (Type_DoubleSpinBox, "drag-wheel-factor",
"Mouse wheel sensitivity during drag operations");
dragWheelSensitivity->setDefaultValue (1.0);
dragWheelSensitivity->setRange (0.001, 100.0);
Setting *dragShiftFactor = createSetting (Type_DoubleSpinBox, "drag-shift-factor",
"Acceleration factor during drag operations while holding down shift");
dragShiftFactor->setDefaultValue (4.0);
dragShiftFactor->setRange (0.001, 100.0);
}
declareSection ("tooltips", "Tooltips");
{
Setting *scene = createSetting (Type_CheckBox, "scene", "Show Tooltips in 3D scenes");
scene->setDefaultValue ("true");
Setting *sceneHideBasic = createSetting (Type_CheckBox, "scene-hide-basic", "Hide basic 3D scenes tooltips");
sceneHideBasic->setDefaultValue ("false");
Setting *sceneDelay = createSetting (Type_SpinBox, "scene-delay",
"Tooltip delay in milliseconds");
sceneDelay->setDefaultValue (500);
sceneDelay->setRange (1, 10000);
}
{
/******************************************************************
* There are three types of values:
*
* Declared values
*
* Pre-determined values, typically for
* combobox drop downs and boolean (radiobutton / checkbox) labels.
* These values represent the total possible list of values that
* may define a setting. No other values are allowed.
*
* Defined values
*
* Values which represent the actual, current value of
* a setting. For settings with declared values, this must be one
* or several declared values, as appropriate.
*
* Proxy values
* Values the proxy master updates the proxy slave when
* it's own definition is set / changed. These are definitions for
* proxy slave settings, but must match any declared values the
* proxy slave has, if any.
*******************************************************************/
/*
//create setting objects, specifying the basic widget type,
//the page name, and the view name
Setting *masterBoolean = createSetting (Type_RadioButton, section,
"Master Proxy");
Setting *slaveBoolean = createSetting (Type_CheckBox, section,
"Proxy Checkboxes");
Setting *slaveSingleText = createSetting (Type_LineEdit, section,
"Proxy TextBox 1");
Setting *slaveMultiText = createSetting (Type_LineEdit, section,
"ProxyTextBox 2");
Setting *slaveAlphaSpinbox = createSetting (Type_SpinBox, section,
"Alpha Spinbox");
Setting *slaveIntegerSpinbox = createSetting (Type_SpinBox, section,
"Int Spinbox");
Setting *slaveDoubleSpinbox = createSetting (Type_DoubleSpinBox,
section, "Double Spinbox");
Setting *slaveSlider = createSetting (Type_Slider, section, "Slider");
Setting *slaveDial = createSetting (Type_Dial, section, "Dial");
//set declared values for selected views
masterBoolean->setDeclaredValues (QStringList()
<< "Profile One" << "Profile Two"
<< "Profile Three" << "Profile Four");
slaveBoolean->setDeclaredValues (QStringList()
<< "One" << "Two" << "Three" << "Four" << "Five");
slaveAlphaSpinbox->setDeclaredValues (QStringList()
<< "One" << "Two" << "Three" << "Four");
masterBoolean->addProxy (slaveBoolean, QList <QStringList>()
<< (QStringList() << "One" << "Three")
<< (QStringList() << "One" << "Three")
<< (QStringList() << "One" << "Three" << "Five")
<< (QStringList() << "Two" << "Four")
);
masterBoolean->addProxy (slaveSingleText, QList <QStringList>()
<< (QStringList() << "Text A")
<< (QStringList() << "Text B")
<< (QStringList() << "Text A")
<< (QStringList() << "Text C")
);
masterBoolean->addProxy (slaveMultiText, QList <QStringList>()
<< (QStringList() << "One" << "Three")
<< (QStringList() << "One" << "Three")
<< (QStringList() << "One" << "Three" << "Five")
<< (QStringList() << "Two" << "Four")
);
masterBoolean->addProxy (slaveAlphaSpinbox, QList <QStringList>()
<< (QStringList() << "Four")
<< (QStringList() << "Three")
<< (QStringList() << "Two")
<< (QStringList() << "One"));
masterBoolean->addProxy (slaveIntegerSpinbox, QList <QStringList> ()
<< (QStringList() << "0")
<< (QStringList() << "7")
<< (QStringList() << "14")
<< (QStringList() << "21"));
masterBoolean->addProxy (slaveDoubleSpinbox, QList <QStringList> ()
<< (QStringList() << "0.17")
<< (QStringList() << "0.34")
<< (QStringList() << "0.51")
<< (QStringList() << "0.68"));
masterBoolean->addProxy (slaveSlider, QList <QStringList> ()
<< (QStringList() << "25")
<< (QStringList() << "50")
<< (QStringList() << "75")
<< (QStringList() << "100")
);
masterBoolean->addProxy (slaveDial, QList <QStringList> ()
<< (QStringList() << "25")
<< (QStringList() << "50")
<< (QStringList() << "75")
<< (QStringList() << "100")
);
//settings with proxies are not serialized by default
//other settings non-serialized for demo purposes
slaveBoolean->setSerializable (false);
slaveSingleText->setSerializable (false);
slaveMultiText->setSerializable (false);
slaveAlphaSpinbox->setSerializable (false);
slaveIntegerSpinbox->setSerializable (false);
slaveDoubleSpinbox->setSerializable (false);
slaveSlider->setSerializable (false);
slaveDial->setSerializable (false);
slaveBoolean->setDefaultValues (QStringList()
<< "One" << "Three" << "Five");
slaveSingleText->setDefaultValue ("Text A");
slaveMultiText->setDefaultValues (QStringList()
<< "One" << "Three" << "Five");
slaveSingleText->setWidgetWidth (24);
slaveMultiText->setWidgetWidth (24);
slaveAlphaSpinbox->setDefaultValue ("Two");
slaveAlphaSpinbox->setWidgetWidth (20);
//slaveAlphaSpinbox->setPrefix ("No. ");
//slaveAlphaSpinbox->setSuffix ("!");
slaveAlphaSpinbox->setWrapping (true);
slaveIntegerSpinbox->setDefaultValue (14);
slaveIntegerSpinbox->setMinimum (0);
slaveIntegerSpinbox->setMaximum (58);
slaveIntegerSpinbox->setPrefix ("$");
slaveIntegerSpinbox->setSuffix (".00");
slaveIntegerSpinbox->setWidgetWidth (10);
slaveIntegerSpinbox->setSpecialValueText ("Nothing!");
slaveDoubleSpinbox->setDefaultValue (0.51);
slaveDoubleSpinbox->setSingleStep(0.17);
slaveDoubleSpinbox->setMaximum(4.0);
slaveSlider->setMinimum (0);
slaveSlider->setMaximum (100);
slaveSlider->setDefaultValue (75);
slaveSlider->setWidgetWidth (100);
slaveSlider->setTicksAbove (true);
slaveSlider->setTickInterval (25);
slaveDial->setMinimum (0);
slaveDial->setMaximum (100);
slaveDial->setSingleStep (5);
slaveDial->setDefaultValue (75);
slaveDial->setTickInterval (25);
*/
}
}
