OperationContextImpl::OperationContextImpl(Client* client, unsigned opId)
: OperationContext(client, opId, clientOperationInfoDecoration(client).getLocker()) {
StorageEngine* storageEngine = getServiceContext()->getGlobalStorageEngine();
setRecoveryUnit(storageEngine->newRecoveryUnit(), kNotInUnitOfWork);
stdx::lock_guard<Client> lk(*client);
client->setOperationContext(this);
}
OperationContextImpl::OperationContextImpl()
: OperationContext(
&cc(), nextOpId.fetchAndAdd(1), clientOperationInfoDecoration(cc()).getLocker()),
_writesAreReplicated(true) {
StorageEngine* storageEngine = getGlobalServiceContext()->getGlobalStorageEngine();
_recovery.reset(storageEngine->newRecoveryUnit());
auto client = getClient();
stdx::lock_guard<Client> lk(*client);
client->setOperationContext(this);
}
OperationContextImpl::OperationContextImpl()
: _client(&cc()),
_locker(clientOperationInfoDecoration(_client).getLocker()),
_writesAreReplicated(true) {
invariant(_locker);
StorageEngine* storageEngine = getGlobalServiceContext()->getGlobalStorageEngine();
_recovery.reset(storageEngine->newRecoveryUnit());
_client->setOperationContext(this);
}
OperationContextImpl::OperationContextImpl() : _client(currentClient.get()) {
invariant(_client);
StorageEngine* storageEngine = getGlobalEnvironment()->getGlobalStorageEngine();
invariant(storageEngine);
_recovery.reset(storageEngine->newRecoveryUnit(this));
if (storageEngine->isMmapV1()) {
_locker.reset(new MMAPV1LockerImpl(idCounter.addAndFetch(1)));
}
else {
_locker.reset(new LockerImpl<false>(idCounter.addAndFetch(1)));
}
_client->setOperationContext(this);
}
void IndexCatalogEntry::setMultikey(OperationContext* txn) {
if (isMultikey()) {
return;
}
// Only one thread should set the multi-key value per collection, because the metadata for
// a collection is one large document.
Lock::ResourceLock collMDLock(txn->lockState(),
ResourceId(RESOURCE_METADATA, _ns),
MODE_X);
// Check again in case we blocked on the MD lock and another thread beat us to setting the
// multiKey metadata for this index.
if (isMultikey()) {
return;
}
// This effectively emulates a sub-transaction off the main transaction, which invoked
// setMultikey. The reason we need is to avoid artificial WriteConflicts, which happen
// with snapshot isolation.
{
StorageEngine* storageEngine = getGlobalEnvironment()->getGlobalStorageEngine();
RecoveryUnitSwap ruSwap(txn, storageEngine->newRecoveryUnit());
WriteUnitOfWork wuow(txn);
if (_collection->setIndexIsMultikey(txn, _descriptor->indexName())) {
if (_infoCache) {
LOG(1) << _ns << ": clearing plan cache - index "
<< _descriptor->keyPattern() << " set to multi key.";
_infoCache->clearQueryCache();
}
}
wuow.commit();
}
_isMultikey = true;
}
std::string newRunQuery(OperationContext* txn,
Message& m,
QueryMessage& q,
CurOp& curop,
Message &result,
bool fromDBDirectClient) {
// Validate the namespace.
const char *ns = q.ns;
uassert(16332, "can't have an empty ns", ns[0]);
const NamespaceString nsString(ns);
uassert(16256, str::stream() << "Invalid ns [" << ns << "]", nsString.isValid());
// Set curop information.
curop.debug().ns = ns;
curop.debug().ntoreturn = q.ntoreturn;
curop.debug().query = q.query;
curop.setQuery(q.query);
// If the query is really a command, run it.
if (nsString.isCommand()) {
int nToReturn = q.ntoreturn;
uassert(16979, str::stream() << "bad numberToReturn (" << nToReturn
<< ") for $cmd type ns - can only be 1 or -1",
nToReturn == 1 || nToReturn == -1);
curop.markCommand();
BufBuilder bb;
bb.skip(sizeof(QueryResult::Value));
BSONObjBuilder cmdResBuf;
if (!runCommands(txn, ns, q.query, curop, bb, cmdResBuf, false, q.queryOptions)) {
uasserted(13530, "bad or malformed command request?");
}
curop.debug().iscommand = true;
// TODO: Does this get overwritten/do we really need to set this twice?
curop.debug().query = q.query;
QueryResult::View qr = bb.buf();
bb.decouple();
qr.setResultFlagsToOk();
qr.msgdata().setLen(bb.len());
curop.debug().responseLength = bb.len();
qr.msgdata().setOperation(opReply);
qr.setCursorId(0);
qr.setStartingFrom(0);
qr.setNReturned(1);
result.setData(qr.view2ptr(), true);
return "";
}
const NamespaceString nss(q.ns);
// Parse the qm into a CanonicalQuery.
CanonicalQuery* cq;
Status canonStatus = CanonicalQuery::canonicalize(
q, &cq, WhereCallbackReal(txn, StringData(nss.db())));
if (!canonStatus.isOK()) {
uasserted(17287, str::stream() << "Can't canonicalize query: " << canonStatus.toString());
}
QLOG() << "Running query:\n" << cq->toString();
LOG(2) << "Running query: " << cq->toStringShort();
// Parse, canonicalize, plan, transcribe, and get a plan executor.
PlanExecutor* rawExec = NULL;
// We use this a lot below.
const LiteParsedQuery& pq = cq->getParsed();
AutoGetCollectionForRead ctx(txn, nss);
const int dbProfilingLevel = (ctx.getDb() != NULL) ? ctx.getDb()->getProfilingLevel() :
serverGlobalParams.defaultProfile;
Collection* collection = ctx.getCollection();
// We'll now try to get the query executor that will execute this query for us. There
// are a few cases in which we know upfront which executor we should get and, therefore,
// we shortcut the selection process here.
//
// (a) If the query is over a collection that doesn't exist, we use an EOFStage.
//
// (b) if the query is a replication's initial sync one, we use a specifically designed
// stage that skips extents faster (see details in exec/oplogstart.h).
//
// Otherwise we go through the selection of which executor is most suited to the
// query + run-time context at hand.
Status status = Status::OK();
if (NULL != collection && pq.getOptions().oplogReplay) {
// Takes ownership of 'cq'.
status = getOplogStartHack(txn, collection, cq, &rawExec);
}
else {
size_t options = QueryPlannerParams::DEFAULT;
if (shardingState.needCollectionMetadata(pq.ns())) {
options |= QueryPlannerParams::INCLUDE_SHARD_FILTER;
}
// Takes ownership of 'cq'.
status = getExecutor(txn, collection, cq, PlanExecutor::YIELD_AUTO, &rawExec, options);
}
if (!status.isOK()) {
// NOTE: Do not access cq as getExecutor has deleted it.
uasserted(17007, "Unable to execute query: " + status.reason());
}
verify(NULL != rawExec);
auto_ptr<PlanExecutor> exec(rawExec);
// If it's actually an explain, do the explain and return rather than falling through
// to the normal query execution loop.
if (pq.isExplain()) {
BufBuilder bb;
bb.skip(sizeof(QueryResult::Value));
BSONObjBuilder explainBob;
Explain::explainStages(exec.get(), ExplainCommon::EXEC_ALL_PLANS, &explainBob);
// Add the resulting object to the return buffer.
BSONObj explainObj = explainBob.obj();
bb.appendBuf((void*)explainObj.objdata(), explainObj.objsize());
curop.debug().iscommand = true;
// TODO: Does this get overwritten/do we really need to set this twice?
curop.debug().query = q.query;
// Set query result fields.
QueryResult::View qr = bb.buf();
bb.decouple();
qr.setResultFlagsToOk();
qr.msgdata().setLen(bb.len());
curop.debug().responseLength = bb.len();
qr.msgdata().setOperation(opReply);
qr.setCursorId(0);
qr.setStartingFrom(0);
qr.setNReturned(1);
result.setData(qr.view2ptr(), true);
return "";
}
// We freak out later if this changes before we're done with the query.
const ChunkVersion shardingVersionAtStart = shardingState.getVersion(cq->ns());
// Handle query option $maxTimeMS (not used with commands).
curop.setMaxTimeMicros(static_cast<unsigned long long>(pq.getMaxTimeMS()) * 1000);
txn->checkForInterrupt(); // May trigger maxTimeAlwaysTimeOut fail point.
// uassert if we are not on a primary, and not a secondary with SlaveOk query parameter set.
bool slaveOK = pq.getOptions().slaveOk || pq.hasReadPref();
status = repl::getGlobalReplicationCoordinator()->checkCanServeReadsFor(
txn,
NamespaceString(cq->ns()),
slaveOK);
uassertStatusOK(status);
// If this exists, the collection is sharded.
// If it doesn't exist, we can assume we're not sharded.
// If we're sharded, we might encounter data that is not consistent with our sharding state.
// We must ignore this data.
CollectionMetadataPtr collMetadata;
if (!shardingState.needCollectionMetadata(pq.ns())) {
collMetadata = CollectionMetadataPtr();
}
else {
collMetadata = shardingState.getCollectionMetadata(pq.ns());
}
// Run the query.
// bb is used to hold query results
// this buffer should contain either requested documents per query or
// explain information, but not both
BufBuilder bb(32768);
bb.skip(sizeof(QueryResult::Value));
// How many results have we obtained from the executor?
int numResults = 0;
// If we're replaying the oplog, we save the last time that we read.
OpTime slaveReadTill;
// Do we save the PlanExecutor in a ClientCursor for getMore calls later?
bool saveClientCursor = false;
BSONObj obj;
PlanExecutor::ExecState state;
// uint64_t numMisplacedDocs = 0;
// Get summary info about which plan the executor is using.
curop.debug().planSummary = Explain::getPlanSummary(exec.get());
while (PlanExecutor::ADVANCED == (state = exec->getNext(&obj, NULL))) {
// Add result to output buffer.
bb.appendBuf((void*)obj.objdata(), obj.objsize());
// Count the result.
++numResults;
// Possibly note slave's position in the oplog.
if (pq.getOptions().oplogReplay) {
BSONElement e = obj["ts"];
if (Date == e.type() || Timestamp == e.type()) {
slaveReadTill = e._opTime();
}
}
// TODO: only one type of 2d search doesn't support this. We need a way to pull it out
// of CanonicalQuery. :(
const bool supportsGetMore = true;
if (!supportsGetMore && (enough(pq, numResults)
|| bb.len() >= MaxBytesToReturnToClientAtOnce)) {
break;
}
else if (enoughForFirstBatch(pq, numResults, bb.len())) {
QLOG() << "Enough for first batch, wantMore=" << pq.wantMore()
<< " numToReturn=" << pq.getNumToReturn()
<< " numResults=" << numResults
<< endl;
// If only one result requested assume it's a findOne() and don't save the cursor.
if (pq.wantMore() && 1 != pq.getNumToReturn()) {
QLOG() << " executor EOF=" << exec->isEOF() << endl;
saveClientCursor = !exec->isEOF();
}
break;
}
}
// If we cache the executor later, we want to deregister it as it receives notifications
// anyway by virtue of being cached.
//
// If we don't cache the executor later, we are deleting it, so it must be deregistered.
//
// So, no matter what, deregister the executor.
exec->deregisterExec();
// Caller expects exceptions thrown in certain cases.
if (PlanExecutor::EXEC_ERROR == state) {
scoped_ptr<PlanStageStats> stats(exec->getStats());
error() << "Plan executor error, stats: "
<< Explain::statsToBSON(*stats);
uasserted(17144, "Executor error: " + WorkingSetCommon::toStatusString(obj));
}
// Why save a dead executor?
if (PlanExecutor::DEAD == state) {
saveClientCursor = false;
}
else if (pq.getOptions().tailable) {
// If we're tailing a capped collection, we don't bother saving the cursor if the
// collection is empty. Otherwise, the semantics of the tailable cursor is that the
// client will keep trying to read from it. So we'll keep it around.
if (collection && collection->numRecords(txn) != 0 && pq.getNumToReturn() != 1) {
saveClientCursor = true;
}
}
// TODO(greg): This will go away soon.
if (!shardingState.getVersion(pq.ns()).isWriteCompatibleWith(shardingVersionAtStart)) {
// if the version changed during the query we might be missing some data and its safe to
// send this as mongos can resend at this point
throw SendStaleConfigException(pq.ns(), "version changed during initial query",
shardingVersionAtStart,
shardingState.getVersion(pq.ns()));
}
const logger::LogComponent queryLogComponent = logger::LogComponent::kQuery;
const logger::LogSeverity logLevelOne = logger::LogSeverity::Debug(1);
PlanSummaryStats summaryStats;
Explain::getSummaryStats(exec.get(), &summaryStats);
curop.debug().ntoskip = pq.getSkip();
curop.debug().nreturned = numResults;
curop.debug().scanAndOrder = summaryStats.hasSortStage;
curop.debug().nscanned = summaryStats.totalKeysExamined;
curop.debug().nscannedObjects = summaryStats.totalDocsExamined;
curop.debug().idhack = summaryStats.isIdhack;
// Set debug information for consumption by the profiler.
if (dbProfilingLevel > 0 ||
curop.elapsedMillis() > serverGlobalParams.slowMS ||
logger::globalLogDomain()->shouldLog(queryLogComponent, logLevelOne)) {
// Get BSON stats.
scoped_ptr<PlanStageStats> execStats(exec->getStats());
BSONObjBuilder statsBob;
Explain::statsToBSON(*execStats, &statsBob);
curop.debug().execStats.set(statsBob.obj());
// Replace exec stats with plan summary if stats cannot fit into CachedBSONObj.
if (curop.debug().execStats.tooBig() && !curop.debug().planSummary.empty()) {
BSONObjBuilder bob;
bob.append("summary", curop.debug().planSummary.toString());
curop.debug().execStats.set(bob.done());
}
}
long long ccId = 0;
if (saveClientCursor) {
// We won't use the executor until it's getMore'd.
exec->saveState();
// Allocate a new ClientCursor. We don't have to worry about leaking it as it's
// inserted into a global map by its ctor.
ClientCursor* cc = new ClientCursor(collection, exec.get(),
cq->getParsed().getOptions().toInt(),
cq->getParsed().getFilter());
ccId = cc->cursorid();
if (fromDBDirectClient) {
cc->setUnownedRecoveryUnit(txn->recoveryUnit());
}
else if (state == PlanExecutor::IS_EOF && pq.getOptions().tailable) {
// Don't stash the RU for tailable cursors at EOF, let them get a new RU on their
// next getMore.
}
else {
// We stash away the RecoveryUnit in the ClientCursor. It's used for subsequent
// getMore requests. The calling OpCtx gets a fresh RecoveryUnit.
cc->setOwnedRecoveryUnit(txn->releaseRecoveryUnit());
StorageEngine* storageEngine = getGlobalEnvironment()->getGlobalStorageEngine();
txn->setRecoveryUnit(storageEngine->newRecoveryUnit(txn));
}
QLOG() << "caching executor with cursorid " << ccId
<< " after returning " << numResults << " results" << endl;
// ClientCursor takes ownership of executor. Release to make sure it's not deleted.
exec.release();
// TODO document
if (pq.getOptions().oplogReplay && !slaveReadTill.isNull()) {
cc->slaveReadTill(slaveReadTill);
}
// TODO document
if (pq.getOptions().exhaust) {
curop.debug().exhaust = true;
}
// Set attributes for getMore.
cc->setCollMetadata(collMetadata);
cc->setPos(numResults);
// If the query had a time limit, remaining time is "rolled over" to the cursor (for
// use by future getmore ops).
cc->setLeftoverMaxTimeMicros(curop.getRemainingMaxTimeMicros());
}
else {
QLOG() << "Not caching executor but returning " << numResults << " results.\n";
}
// Add the results from the query into the output buffer.
result.appendData(bb.buf(), bb.len());
bb.decouple();
// Fill out the output buffer's header.
QueryResult::View qr = result.header().view2ptr();
qr.setCursorId(ccId);
curop.debug().cursorid = (0 == ccId ? -1 : ccId);
qr.setResultFlagsToOk();
qr.msgdata().setOperation(opReply);
qr.setStartingFrom(0);
qr.setNReturned(numResults);
// curop.debug().exhaust is set above.
return curop.debug().exhaust ? pq.ns() : "";
}
std::string runQuery(OperationContext* txn,
QueryMessage& q,
const NamespaceString& nss,
CurOp& curop,
Message &result) {
// Validate the namespace.
uassert(16256, str::stream() << "Invalid ns [" << nss.ns() << "]", nss.isValid());
invariant(!nss.isCommand());
// Set curop information.
beginQueryOp(nss, q.query, q.ntoreturn, q.ntoskip, &curop);
// Parse the qm into a CanonicalQuery.
std::auto_ptr<CanonicalQuery> cq;
{
CanonicalQuery* cqRaw;
Status canonStatus = CanonicalQuery::canonicalize(q,
&cqRaw,
WhereCallbackReal(txn, nss.db()));
if (!canonStatus.isOK()) {
uasserted(17287, str::stream() << "Can't canonicalize query: "
<< canonStatus.toString());
}
cq.reset(cqRaw);
}
invariant(cq.get());
LOG(5) << "Running query:\n" << cq->toString();
LOG(2) << "Running query: " << cq->toStringShort();
// Parse, canonicalize, plan, transcribe, and get a plan executor.
AutoGetCollectionForRead ctx(txn, nss);
Collection* collection = ctx.getCollection();
const int dbProfilingLevel = ctx.getDb() ? ctx.getDb()->getProfilingLevel() :
serverGlobalParams.defaultProfile;
// We have a parsed query. Time to get the execution plan for it.
std::unique_ptr<PlanExecutor> exec;
{
PlanExecutor* rawExec;
Status execStatus = getExecutorFind(txn,
collection,
nss,
cq.release(),
PlanExecutor::YIELD_AUTO,
&rawExec);
uassertStatusOK(execStatus);
exec.reset(rawExec);
}
const LiteParsedQuery& pq = exec->getCanonicalQuery()->getParsed();
// If it's actually an explain, do the explain and return rather than falling through
// to the normal query execution loop.
if (pq.isExplain()) {
BufBuilder bb;
bb.skip(sizeof(QueryResult::Value));
BSONObjBuilder explainBob;
Explain::explainStages(exec.get(), ExplainCommon::EXEC_ALL_PLANS, &explainBob);
// Add the resulting object to the return buffer.
BSONObj explainObj = explainBob.obj();
bb.appendBuf((void*)explainObj.objdata(), explainObj.objsize());
// TODO: Does this get overwritten/do we really need to set this twice?
curop.debug().query = q.query;
// Set query result fields.
QueryResult::View qr = bb.buf();
bb.decouple();
qr.setResultFlagsToOk();
qr.msgdata().setLen(bb.len());
curop.debug().responseLength = bb.len();
qr.msgdata().setOperation(opReply);
qr.setCursorId(0);
qr.setStartingFrom(0);
qr.setNReturned(1);
result.setData(qr.view2ptr(), true);
return "";
}
// We freak out later if this changes before we're done with the query.
const ChunkVersion shardingVersionAtStart = shardingState.getVersion(nss.ns());
// Handle query option $maxTimeMS (not used with commands).
curop.setMaxTimeMicros(static_cast<unsigned long long>(pq.getMaxTimeMS()) * 1000);
txn->checkForInterrupt(); // May trigger maxTimeAlwaysTimeOut fail point.
// uassert if we are not on a primary, and not a secondary with SlaveOk query parameter set.
bool slaveOK = pq.isSlaveOk() || pq.hasReadPref();
Status serveReadsStatus = repl::getGlobalReplicationCoordinator()->checkCanServeReadsFor(
txn,
nss,
slaveOK);
uassertStatusOK(serveReadsStatus);
// Run the query.
// bb is used to hold query results
// this buffer should contain either requested documents per query or
// explain information, but not both
BufBuilder bb(32768);
bb.skip(sizeof(QueryResult::Value));
// How many results have we obtained from the executor?
int numResults = 0;
// If we're replaying the oplog, we save the last time that we read.
Timestamp slaveReadTill;
BSONObj obj;
PlanExecutor::ExecState state;
// uint64_t numMisplacedDocs = 0;
// Get summary info about which plan the executor is using.
curop.debug().planSummary = Explain::getPlanSummary(exec.get());
while (PlanExecutor::ADVANCED == (state = exec->getNext(&obj, NULL))) {
// Add result to output buffer.
bb.appendBuf((void*)obj.objdata(), obj.objsize());
// Count the result.
++numResults;
// Possibly note slave's position in the oplog.
if (pq.isOplogReplay()) {
BSONElement e = obj["ts"];
if (Date == e.type() || bsonTimestamp == e.type()) {
slaveReadTill = e.timestamp();
}
}
if (enoughForFirstBatch(pq, numResults, bb.len())) {
LOG(5) << "Enough for first batch, wantMore=" << pq.wantMore()
<< " numToReturn=" << pq.getNumToReturn()
<< " numResults=" << numResults
<< endl;
break;
}
}
// If we cache the executor later, we want to deregister it as it receives notifications
// anyway by virtue of being cached.
//
// If we don't cache the executor later, we are deleting it, so it must be deregistered.
//
// So, no matter what, deregister the executor.
exec->deregisterExec();
// Caller expects exceptions thrown in certain cases.
if (PlanExecutor::FAILURE == state) {
scoped_ptr<PlanStageStats> stats(exec->getStats());
error() << "Plan executor error, stats: "
<< Explain::statsToBSON(*stats);
uasserted(17144, "Executor error: " + WorkingSetCommon::toStatusString(obj));
}
// TODO: Currently, chunk ranges are kept around until all ClientCursors created while the
// chunk belonged on this node are gone. Separating chunk lifetime management from
// ClientCursor should allow this check to go away.
if (!shardingState.getVersion(nss.ns()).isWriteCompatibleWith(shardingVersionAtStart)) {
// if the version changed during the query we might be missing some data and its safe to
// send this as mongos can resend at this point
throw SendStaleConfigException(nss.ns(), "version changed during initial query",
shardingVersionAtStart,
shardingState.getVersion(nss.ns()));
}
// Fill out curop based on query results. If we have a cursorid, we will fill out curop with
// this cursorid later.
long long ccId = 0;
if (shouldSaveCursor(txn, collection, state, exec.get())) {
// We won't use the executor until it's getMore'd.
exec->saveState();
// Allocate a new ClientCursor. We don't have to worry about leaking it as it's
// inserted into a global map by its ctor.
ClientCursor* cc = new ClientCursor(collection->getCursorManager(),
exec.release(),
nss.ns(),
pq.getOptions(),
pq.getFilter());
ccId = cc->cursorid();
if (txn->getClient()->isInDirectClient()) {
cc->setUnownedRecoveryUnit(txn->recoveryUnit());
}
else if (state == PlanExecutor::IS_EOF && pq.isTailable()) {
// Don't stash the RU for tailable cursors at EOF, let them get a new RU on their
// next getMore.
}
else {
// We stash away the RecoveryUnit in the ClientCursor. It's used for subsequent
// getMore requests. The calling OpCtx gets a fresh RecoveryUnit.
txn->recoveryUnit()->abandonSnapshot();
cc->setOwnedRecoveryUnit(txn->releaseRecoveryUnit());
StorageEngine* storageEngine = getGlobalServiceContext()->getGlobalStorageEngine();
invariant(txn->setRecoveryUnit(storageEngine->newRecoveryUnit(),
OperationContext::kNotInUnitOfWork)
== OperationContext::kNotInUnitOfWork);
}
LOG(5) << "caching executor with cursorid " << ccId
<< " after returning " << numResults << " results" << endl;
// TODO document
if (pq.isOplogReplay() && !slaveReadTill.isNull()) {
cc->slaveReadTill(slaveReadTill);
}
// TODO document
if (pq.isExhaust()) {
curop.debug().exhaust = true;
}
cc->setPos(numResults);
// If the query had a time limit, remaining time is "rolled over" to the cursor (for
// use by future getmore ops).
cc->setLeftoverMaxTimeMicros(curop.getRemainingMaxTimeMicros());
endQueryOp(cc->getExecutor(), dbProfilingLevel, numResults, ccId, &curop);
}
else {
LOG(5) << "Not caching executor but returning " << numResults << " results.\n";
endQueryOp(exec.get(), dbProfilingLevel, numResults, ccId, &curop);
}
// Add the results from the query into the output buffer.
result.appendData(bb.buf(), bb.len());
bb.decouple();
// Fill out the output buffer's header.
QueryResult::View qr = result.header().view2ptr();
qr.setCursorId(ccId);
qr.setResultFlagsToOk();
qr.msgdata().setOperation(opReply);
qr.setStartingFrom(0);
qr.setNReturned(numResults);
// curop.debug().exhaust is set above.
return curop.debug().exhaust ? nss.ns() : "";
}
void IndexCatalogEntryImpl::setMultikey(OperationContext* opCtx,
const MultikeyPaths& multikeyPaths) {
if (!_indexTracksPathLevelMultikeyInfo && isMultikey()) {
// If the index is already set as multikey and we don't have any path-level information to
// update, then there's nothing more for us to do.
return;
}
if (_indexTracksPathLevelMultikeyInfo) {
stdx::lock_guard<stdx::mutex> lk(_indexMultikeyPathsMutex);
invariant(multikeyPaths.size() == _indexMultikeyPaths.size());
bool newPathIsMultikey = false;
for (size_t i = 0; i < multikeyPaths.size(); ++i) {
if (!std::includes(_indexMultikeyPaths[i].begin(),
_indexMultikeyPaths[i].end(),
multikeyPaths[i].begin(),
multikeyPaths[i].end())) {
// If 'multikeyPaths' contains a new path component that causes this index to be
// multikey, then we must update the index metadata in the CollectionCatalogEntry.
newPathIsMultikey = true;
break;
}
}
if (!newPathIsMultikey) {
// Otherwise, if all the path components in 'multikeyPaths' are already tracked in
// '_indexMultikeyPaths', then there's nothing more for us to do.
return;
}
}
{
// Only one thread should set the multi-key value per collection, because the metadata for a
// collection is one large document.
Lock::ResourceLock collMDLock(
opCtx->lockState(), ResourceId(RESOURCE_METADATA, _ns), MODE_X);
if (!_indexTracksPathLevelMultikeyInfo && isMultikey()) {
// It's possible that we raced with another thread when acquiring the MD lock. If the
// index is already set as multikey and we don't have any path-level information to
// update, then there's nothing more for us to do.
return;
}
// This effectively emulates a side-transaction off the main transaction, which invoked
// setMultikey. The reason we need is to avoid artificial WriteConflicts, which happen with
// snapshot isolation.
{
StorageEngine* storageEngine = getGlobalServiceContext()->getGlobalStorageEngine();
RecoveryUnitSwap ruSwap(opCtx, storageEngine->newRecoveryUnit());
WriteUnitOfWork wuow(opCtx);
// It's possible that the index type (e.g. ascending/descending index) supports tracking
// path-level multikey information, but this particular index doesn't.
// CollectionCatalogEntry::setIndexIsMultikey() requires that we discard the path-level
// multikey information in order to avoid unintentionally setting path-level multikey
// information on an index created before 3.4.
if (_collection->setIndexIsMultikey(
opCtx,
_descriptor->indexName(),
_indexTracksPathLevelMultikeyInfo ? multikeyPaths : MultikeyPaths{})) {
if (_infoCache) {
LOG(1) << _ns << ": clearing plan cache - index " << _descriptor->keyPattern()
<< " set to multi key.";
_infoCache->clearQueryCache();
}
}
wuow.commit();
}
}
_isMultikey.store(true);
if (_indexTracksPathLevelMultikeyInfo) {
stdx::lock_guard<stdx::mutex> lk(_indexMultikeyPathsMutex);
for (size_t i = 0; i < multikeyPaths.size(); ++i) {
_indexMultikeyPaths[i].insert(multikeyPaths[i].begin(), multikeyPaths[i].end());
}
}
}
static void handleCursorCommand(OperationContext* txn,
const string& ns,
ClientCursorPin* pin,
PlanExecutor* exec,
const BSONObj& cmdObj,
BSONObjBuilder& result) {
ClientCursor* cursor = pin ? pin->c() : NULL;
if (pin) {
invariant(cursor);
invariant(cursor->getExecutor() == exec);
invariant(cursor->isAggCursor());
}
BSONElement batchSizeElem = cmdObj.getFieldDotted("cursor.batchSize");
const long long batchSize = batchSizeElem.isNumber()
? batchSizeElem.numberLong()
: 101; // same as query
// can't use result BSONObjBuilder directly since it won't handle exceptions correctly.
BSONArrayBuilder resultsArray;
const int byteLimit = MaxBytesToReturnToClientAtOnce;
BSONObj next;
for (int objCount = 0; objCount < batchSize; objCount++) {
// The initial getNext() on a PipelineProxyStage may be very expensive so we don't
// do it when batchSize is 0 since that indicates a desire for a fast return.
if (exec->getNext(&next, NULL) != PlanExecutor::ADVANCED) {
if (pin) pin->deleteUnderlying();
// make it an obvious error to use cursor or executor after this point
cursor = NULL;
exec = NULL;
break;
}
if (resultsArray.len() + next.objsize() > byteLimit) {
// Get the pipeline proxy stage wrapped by this PlanExecutor.
PipelineProxyStage* proxy = static_cast<PipelineProxyStage*>(exec->getRootStage());
// too big. next will be the first doc in the second batch
proxy->pushBack(next);
break;
}
resultsArray.append(next);
}
// NOTE: exec->isEOF() can have side effects such as writing by $out. However, it should
// be relatively quick since if there was no pin then the input is empty. Also, this
// violates the contract for batchSize==0. Sharding requires a cursor to be returned in that
// case. This is ok for now however, since you can't have a sharded collection that doesn't
// exist.
const bool canReturnMoreBatches = pin;
if (!canReturnMoreBatches && exec && !exec->isEOF()) {
// msgasserting since this shouldn't be possible to trigger from today's aggregation
// language. The wording assumes that the only reason pin would be null is if the
// collection doesn't exist.
msgasserted(17391, str::stream()
<< "Aggregation has more results than fit in initial batch, but can't "
<< "create cursor since collection " << ns << " doesn't exist");
}
if (cursor) {
// If a time limit was set on the pipeline, remaining time is "rolled over" to the
// cursor (for use by future getmore ops).
cursor->setLeftoverMaxTimeMicros( txn->getCurOp()->getRemainingMaxTimeMicros() );
// We stash away the RecoveryUnit in the ClientCursor. It's used for subsequent
// getMore requests. The calling OpCtx gets a fresh RecoveryUnit.
cursor->setOwnedRecoveryUnit(txn->releaseRecoveryUnit());
StorageEngine* storageEngine = getGlobalEnvironment()->getGlobalStorageEngine();
txn->setRecoveryUnit(storageEngine->newRecoveryUnit());
// Cursor needs to be in a saved state while we yield locks for getmore. State
// will be restored in getMore().
exec->saveState();
}
BSONObjBuilder cursorObj(result.subobjStart("cursor"));
cursorObj.append("id", cursor ? cursor->cursorid() : 0LL);
cursorObj.append("ns", ns);
cursorObj.append("firstBatch", resultsArray.arr());
cursorObj.done();
}