void NewLanguagesController::downloadFinished(const QFileInfo destFile)
{
// if no "destFile" is assigned, we can ignore this signal
if (destFile.absoluteFilePath().isEmpty()) return;
// create languages directory
QDir languagesDir;
languagesDir.mkpath(programOptions->getLanguagesPath());
// unpack the downloaded file
Unpacker *unpacker = new Unpacker;
// install it directly to languages folder
unpacker->extractPackage(destFile.filePath().toStdString(),
QString(programOptions->getLanguagesPath() + "/").toStdString(),
true);
// check if we installed this language
bool error = false;
// check if all files has been extracted
for (int n = 0; n < unpacker->getExtractedFilesCount(); n++)
if (!error) // check if the extracted file exists
error = !QFile::exists(QString(programOptions->getLanguagesPath() + "/" +
QString().fromStdString(unpacker->getExtractedFileName(n, true))));
// destroy unpacker
delete unpacker;
// remove temporal fil
QFile::remove(destFile.filePath());
// finish event
emit afterInstallNewLanguage(currentLanguage, error);
// reset flags
currentLanguage = NULL;
// reload all info
fillInstalledLanguages();
updateNewLanguages();
}
void dsp::LoadToFold::configure_detection (Detection* detect,
unsigned noperations)
{
#if HAVE_CUDA
bool run_on_gpu = thread_id < config->get_cuda_ndevice();
cudaStream_t stream = reinterpret_cast<cudaStream_t>( gpu_stream );
if (run_on_gpu)
{
config->ndim = 2;
detect->set_engine (new CUDA::DetectionEngine(stream));
}
#endif
if (manager->get_info()->get_npol() == 1)
{
cerr << "Only single polarization detection available" << endl;
detect->set_output_state( Signal::PP_State );
}
else
{
if (config->fourth_moment)
{
detect->set_output_state (Signal::Stokes);
detect->set_output_ndim (4);
}
else if (config->npol == 4)
{
detect->set_output_state (Signal::Coherence);
detect->set_output_ndim (config->ndim);
}
else if (config->npol == 3)
detect->set_output_state (Signal::NthPower);
else if (config->npol == 2)
detect->set_output_state (Signal::PPQQ);
else if (config->npol == 1)
detect->set_output_state (Signal::Intensity);
else
throw Error( InvalidState, "LoadToFold::construct",
"invalid npol config=%d input=%d",
config->npol, manager->get_info()->get_npol() );
}
if (detect->get_order_supported (TimeSeries::OrderTFP)
&& noperations == operations.size()) // no operations yet added
{
Unpacker* unpacker = manager->get_unpacker();
if (unpacker->get_order_supported (TimeSeries::OrderTFP))
{
cerr << "unpack more efficiently in TFP order" << endl;
unpacker->set_output_order (TimeSeries::OrderTFP);
}
}
}
void Message <Args...>::get (F f) const
{
std::function <void (bool, Args...)> func (f);
for (auto && element : _elements)
{
Unpacker <Args..., void> unpacker;
StreamBinIn sbi (element.second);
unpacker.unpack (func, element.first, sbi);
// deserialize, get direction, call f
}
}
TEST(unpacker, with_1_error_in_data)
{
bool packetArray[101] = {1,0,1,0,0,0,1,0,1,1,0,1,0,1,0,0,1,0,0,1,1,1,0,1,0,0,1,1,1,0,0,1,1,0,1,0,1,1,0,1,0,0,1,0,0,1,1,0,1,1,0,0,1,1,0,0,1,1,0,1,0,1,0,0,0,1,1,0,0,1,1,0,1,0,0,1,0,1,0,1,0,1,0,1,0,1,0,1,0,1,0,1,0,1,0,1,0,1,0,1,0};
vector<bool> packet (packetArray, packetArray + sizeof(packetArray) / sizeof(bool) );
bool correctArray[48] = { 1,1,0,1,0,0,1,1,1,0,1,0,1,0,0,1,0,1,0,1,1,1,0,1,0,0,1,0,1,1,0,1,1,0,1,1,1,1,0,0,1,0,0,1,0,1,0,0 };
vector<bool> correct (correctArray, correctArray + sizeof(correctArray) / sizeof(bool) );
vector<bool> output; // output of function
Unpacker unpacker;
unpacker.unpack(packet, output);
ASSERT_THAT(output, testing::ContainerEq(correct));
}
int main(int argc, char ** argv)
{
QCoreApplication app(argc,argv);
Unpacker *u = Unpacker::instance();
if( argc == 3 ) {
u->unpackFile( argv[1], argv[2] );
} else {
u->unpackFile("e:\\downloads\\kde\\OggDS0995.exe","e:\\downloads\\kde");
}
fprintf(stdout, "Unpack result: %s", qPrintable( u->lastError() ));
return 0;
}
int main(int argc, char ** argv)
{
std::cout << "--------------------------------------------" << std::endl
<< "Pakunpaker v1.0 by Xesc & Technology 2008-09" << std::endl
<< "--------------------------------------------" << std::endl << std::endl;
if (argc > 2)
{
// create a new package
if (strcmp(argv[1], "-i") == 0)
{
Packer *packer = new Packer;
for (int param = 3; param < argc; param++)
{
packer->addFile(std::string(argv[param]));
std::cout << "added: " << argv[param] << std::endl;
}
packer->buildPackage(argv[2]);
std::cout << "Package build: " << argv[2] << std::endl;
delete packer;
}
// extract files from package
else if ((strcmp(argv[1], "-o") == 0 || strcmp(argv[1], "-oo") == 0) && argc == 4)
{
Unpacker *unpacker = new Unpacker;
unpacker->extractPackage(std::string(argv[2]), std::string(argv[3]), strcmp(argv[1], "-o") == 0);
for (int n = 0; n < unpacker->getExtractedFilesCount(); n++)
std::cout << "Unpacked file " << n + 1 << " to: " << unpacker->getExtractedFileName(n) << std::endl;
delete unpacker;
}
else // unknonw parameters
displayHelp();
}
else // invalid parameters
displayHelp();
return 0;
}
void dsp::SingleThread::initialize () try
{
TimeSeries::auto_delete = false;
operations.resize (0);
// each timeseries created will be counted in new_time_series
config->buffers = 0;
if (thread_id < config->affinity.size())
set_affinity (config->affinity[thread_id]);
// only the first thread should prepare the input
if (thread_id == 0)
config->prepare( manager->get_input() );
if (!unpacked)
unpacked = new_time_series();
manager->set_output (unpacked);
operations.push_back (manager.get());
#if HAVE_CUDA
bool run_on_gpu = thread_id < config->get_cuda_ndevice();
cudaStream_t stream = 0;
if (run_on_gpu)
{
// disable input buffering when data must be copied between devices
if (config->get_total_nthread() > 1)
config->input_buffering = false;
int device = config->cuda_device[thread_id];
cerr << "dspsr: thread " << thread_id
<< " using CUDA device " << device << endl;
int ndevice = 0;
cudaGetDeviceCount(&ndevice);
if (device >= ndevice)
throw Error (InvalidParam, "dsp::SingleThread::initialize",
"device=%d >= ndevice=%d", device, ndevice);
cudaError err = cudaSetDevice (device);
if (err != cudaSuccess)
throw Error (InvalidState, "dsp::SingleThread::initialize",
"cudaMalloc failed: %s", cudaGetErrorString(err));
unsigned nstream = count (config->cuda_device, (unsigned)device);
if (nstream > 1)
{
cudaStreamCreate( &stream );
cerr << "dspsr: thread " << thread_id << " on stream " << stream << endl;
}
gpu_stream = stream;
device_memory = new CUDA::DeviceMemory (stream);
Unpacker* unpacker = manager->get_unpacker ();
if (unpacker->get_device_supported( device_memory ))
{
if (Operation::verbose)
cerr << "SingleThread: unpack on GraphicsPU" << endl;
unpacker->set_device( device_memory );
unpacked->set_memory( device_memory );
BitSeries* bits = new BitSeries;
bits->set_memory (new CUDA::PinnedMemory);
manager->set_output (bits);
}
else
{
if (Operation::verbose)
cerr << "SingleThread: unpack on CPU" << endl;
TransferCUDA* transfer = new TransferCUDA;
transfer->set_kind( cudaMemcpyHostToDevice );
transfer->set_input( unpacked );
unpacked = new_time_series ();
unpacked->set_memory (device_memory);
transfer->set_output( unpacked );
operations.push_back (transfer);
}
}
#endif // HAVE_CUFFT
}
catch (Error& error)
{
throw error += "dsp::SingleThread::initialize";
}
int main(int argc, char *argv[]){
if(argc >= 2 && (strcmp(argv[1], "--help") == 0 || strcmp(argv[1], "-h") == 0)){ // A stupid way to do this... for now.
Unpacker *temp_core = GetCore();
help(argv[0], temp_core);
delete temp_core;
return 0;
}
else if(argc >= 2 && (strcmp(argv[1], "--version") == 0 || strcmp(argv[1], "-v") == 0)){ // Display version information
std::cout << " " << PROG_NAME << "-------v" << SCAN_VERSION << " (" << SCAN_DATE << ")\n";
std::cout << " |hribf_buffers-v" << HRIBF_BUFFERS_VERSION << " (" << HRIBF_BUFFERS_DATE << ")\n";
std::cout << " |CTerminal-----v" << CTERMINAL_VERSION << " (" << CTERMINAL_DATE << ")\n";
std::cout << " |poll2_socket--v" << POLL2_SOCKET_VERSION << " (" << POLL2_SOCKET_DATE << ")\n";
return 0;
}
debug_mode = false;
dry_run_mode = false;
shm_mode = false;
num_spills_recvd = 0;
long file_start_offset = 0;
// Fill the argument list.
std::deque<std::string> scan_args;
std::deque<std::string> core_args;
int arg_index = 1;
while(arg_index < argc){
scan_args.push_back(std::string(argv[arg_index++]));
}
Unpacker *core = GetCore(); // Get a pointer to the main Unpacker object.
// Loop through the arg list and extract ScanMain arguments.
std::string current_arg;
while(!scan_args.empty()){
current_arg = scan_args.front();
scan_args.pop_front();
if(current_arg == "--debug"){
core->SetDebugMode();
debug_mode = true;
}
else if(current_arg == "--dry-run"){
dry_run_mode = true;
}
else if(current_arg == "--fast-fwd"){
if(scan_args.empty()){
std::cout << " Error: Missing required argument to option '--fast-fwd'!\n";
help(argv[0], core);
return 1;
}
file_start_offset = atoll(scan_args.front().c_str());
scan_args.pop_front();
}
else if(current_arg == "--quiet"){
is_verbose = false;
}
else if(current_arg == "--shm"){
file_format = 0;
shm_mode = true;
std::cout << " Using shm mode!\n";
}
else if(current_arg == "--ldf"){
file_format = 0;
}
else if(current_arg == "--pld"){
file_format = 1;
}
else if(current_arg == "--root"){
file_format = 2;
}
else{ core_args.push_back(current_arg); } // Unrecognized option.
}
std::string input_filename = "";
if(!core->SetArgs(core_args, input_filename)){
help(argv[0], core);
return 1;
}
if(!shm_mode){
extension = GetExtension(input_filename, prefix);
if(file_format != -1){
if(file_format == 0){ std::cout << sys_message_head << "Forcing ldf file readout.\n"; }
else if(file_format == 1){ std::cout << sys_message_head << "Forcing pld file readout.\n"; }
else if(file_format == 2){ std::cout << sys_message_head << "Forcing root file readout.\n"; }
}
else{
if(prefix == ""){
std::cout << " ERROR: Input filename was not specified!\n";
return 1;
}
if(extension == "ldf"){ // List data format file
file_format = 0;
}
else if(extension == "pld"){ // Pixie list data file format
file_format = 1;
}
else if(extension == "root"){ // Pixie list data file format
file_format = 2;
}
else{
std::cout << " ERROR: Invalid file format '" << extension << "'\n";
std::cout << " The current valid data formats are:\n";
std::cout << " ldf - list data format (HRIBF)\n";
std::cout << " pld - pixie list data format\n";
std::cout << " root - root file containing raw pixie data\n";
return 1;
}
}
}
// Initialize the Unpacker object.
core->Initialize(sys_message_head);
// Initialize the command terminal
Terminal terminal;
term_ = &terminal;
if(!shm_mode){
std::cout << sys_message_head << "Using file prefix " << prefix << ".\n";
input_file.open((prefix+"."+extension).c_str(), std::ios::binary);
if(!input_file.is_open() || !input_file.good()){
std::cout << " ERROR: Failed to open input file '" << prefix+"."+extension << "'! Check that the path is correct.\n";
input_file.close();
return 1;
}
}
else{
if(!poll_server.Init(5555, 1)){
std::cout << " ERROR: Failed to open shm socket 5555!\n";
return 1;
}
std::string temp_name = std::string(PROG_NAME);
// Only initialize the terminal if this is shared-memory mode
terminal.Initialize(("."+temp_name+".cmd").c_str());
terminal.SetPrompt((temp_name+" $ ").c_str());
terminal.AddStatusWindow();
std::cout << "\n " << PROG_NAME << " v" << SCAN_VERSION << "\n";
std::cout << " == == == == == \n\n";
}
if(debug_mode){ std::cout << sys_message_head << "Using debug mode.\n"; }
if(dry_run_mode){ std::cout << sys_message_head << "Doing a dry run.\n"; }
if(shm_mode){
std::cout << sys_message_head << "Using shared-memory mode.\n";
std::cout << sys_message_head << "Listening on poll2 SHM port 5555\n";
}
if(!shm_mode){
// Start reading the file
// Every poll2 ldf file starts with a DIR buffer followed by a HEAD buffer
int num_buffers;
if(file_format == 0){
dirbuff.Read(&input_file, num_buffers);
headbuff.Read(&input_file);
// Let's read out the file information from these buffers
std::cout << "\n 'DIR ' buffer-\n";
std::cout << " Run number: " << dirbuff.GetRunNumber() << std::endl;
std::cout << " Number buffers: " << num_buffers << std::endl << std::endl;
std::cout << " 'HEAD' buffer-\n";
std::cout << " Facility: " << headbuff.GetFacility() << std::endl;
std::cout << " Format: " << headbuff.GetFormat() << std::endl;
std::cout << " Type: " << headbuff.GetType() << std::endl;
std::cout << " Date: " << headbuff.GetDate() << std::endl;
std::cout << " Title: " << headbuff.GetRunTitle() << std::endl;
std::cout << " Run number: " << headbuff.GetRunNumber() << std::endl << std::endl;
}
else if(file_format == 1){
pldHead.Read(&input_file);
max_spill_size = pldHead.GetMaxSpillSize();
// Let's read out the file information from these buffers
std::cout << "\n 'HEAD' buffer-\n";
std::cout << " Facility: " << pldHead.GetFacility() << std::endl;
std::cout << " Format: " << pldHead.GetFormat() << std::endl;
std::cout << " Start: " << pldHead.GetStartDate() << std::endl;
std::cout << " Stop: " << pldHead.GetEndDate() << std::endl;
std::cout << " Title: " << pldHead.GetRunTitle() << std::endl;
std::cout << " Run number: " << pldHead.GetRunNumber() << std::endl;
std::cout << " Max spill: " << pldHead.GetMaxSpillSize() << " words\n";
std::cout << " ACQ Time: " << pldHead.GetRunTime() << " seconds\n\n";
}
else if(file_format == 2){
}
// Fast forward in the file
if(file_start_offset != 0){
std::cout << " Skipping ahead to word no. " << file_start_offset << " in file\n";
input_file.seekg(file_start_offset*4);
std::cout << " Input file is now at " << input_file.tellg() << " bytes\n";
}
start_run_control(core);
}
else{
// Start the run control thread
std::cout << "\nStarting data control thread\n";
std::thread runctrl(start_run_control, core);
// Start the command control thread. This needs to be the last thing we do to
// initialize, so the user cannot enter commands before setup is complete
std::cout << "Starting command thread\n\n";
std::thread comctrl(start_cmd_control);
// Synchronize the threads and wait for completion
comctrl.join();
runctrl.join();
// Close the socket and restore the terminal
terminal.Close();
poll_server.Close();
//Reprint the leader as the carriage was returned
std::cout << "Running " << PROG_NAME << " v" << SCAN_VERSION << " (" << SCAN_DATE << ")\n";
}
std::cout << sys_message_head << "Retrieved " << num_spills_recvd << " spills!\n";
input_file.close();
// Clean up detector driver
std::cout << "\nCleaning up...\n";
core->PrintStatus(sys_message_head);
core->Close();
delete core;
return 0;
}
void dsp::LoadToFold::construct () try
{
SingleThread::construct ();
#if HAVE_CUDA
bool run_on_gpu = thread_id < config->get_cuda_ndevice();
cudaStream_t stream = reinterpret_cast<cudaStream_t>( gpu_stream );
#endif
if (manager->get_info()->get_detected())
{
Unpacker* unpacker = manager->get_unpacker();
// detected data is handled much more efficiently in TFP order
if ( config->optimal_order
&& unpacker->get_order_supported (TimeSeries::OrderTFP) )
{
unpacker->set_output_order (TimeSeries::OrderTFP);
}
#if HAVE_CFITSIO
#if HAVE_fits
// Use callback to handle scales/offsets for read-in
if (manager->get_info()->get_machine() == "FITS")
{
if (Operation::verbose)
cerr << "Using callback to read PSRFITS file." << endl;
// connect a callback
bool success = false;
FITSUnpacker* funp = dynamic_cast<FITSUnpacker*> (
manager->get_unpacker());
FITSFile* ffile = dynamic_cast<FITSFile*> (manager->get_input());
if (funp && ffile)
{
ffile->update.connect ( funp, &FITSUnpacker::set_parameters );
success = true;
}
else
{
MultiFile* mfile = dynamic_cast<MultiFile*> (manager->get_input());
if (mfile)
{
for (unsigned i=0; i < mfile->nfiles(); ++i)
{
ffile = dynamic_cast<FITSFile*> (mfile->get_files()[i].get());
if (funp && ffile) {
ffile->update.connect (
funp, &FITSUnpacker::set_parameters );
success = true;
}
}
}
}
if (not success)
cerr << "dspsr: WARNING: FITS input input but unable to apply scales and offsets." << endl;
}
#endif
#endif
config->coherent_dedispersion = false;
prepare_interchan (unpacked);
build_fold (unpacked);
return;
}
// record the number of operations in signal path
unsigned noperations = operations.size();
bool report_vitals = thread_id==0 && config->report_vitals;
if (manager->get_info()->get_type() != Signal::Pulsar)
{
// the kernel gets messed up by DM=0 sources, like PolnCal
if (report_vitals)
cerr << "Disabling coherent dedispersion of non-pulsar signal" << endl;
config->coherent_dedispersion = false;
}
// the data are not detected, so set up phase coherent reduction path
// NB that this does not necessarily mean coherent dedispersion.
unsigned frequency_resolution = config->filterbank.get_freq_res ();
if (config->coherent_dedispersion)
{
if (!kernel)
kernel = new Dedispersion;
if (frequency_resolution)
{
if (report_vitals)
cerr << "dspsr: setting filter length to " << frequency_resolution << endl;
kernel->set_frequency_resolution (frequency_resolution);
}
if (config->times_minimum_nfft)
{
if (report_vitals)
cerr << "dspsr: setting filter length to minimum times "
<< config->times_minimum_nfft << endl;
kernel->set_times_minimum_nfft (config->times_minimum_nfft);
}
if (config->nsmear)
{
if (report_vitals)
cerr << "dspsr: setting smearing to " << config->nsmear << endl;
kernel->set_smearing_samples (config->nsmear);
}
if (config->use_fft_bench)
{
if (report_vitals)
cerr << "dspsr: using benchmarks to choose optimal FFT length" << endl;
#if HAVE_CUDA
if (run_on_gpu)
kernel->set_optimal_fft( new OptimalFilterbank("CUDA") );
else
#endif
kernel->set_optimal_fft( new OptimalFFT );
}
}
else
kernel = 0;
if (!config->integration_turns && !passband)
passband = new Response;
Response* response = kernel.ptr();
if (config->zap_rfi)
{
if (!rfi_filter)
rfi_filter = new RFIFilter;
rfi_filter->set_input (manager);
response = rfi_filter;
if (kernel)
{
if (!response_product)
response_product = new ResponseProduct;
response_product->add_response (kernel);
response_product->add_response (rfi_filter);
response = response_product;
}
}
if (!config->calibrator_database_filename.empty())
{
dsp::PolnCalibration* polcal = new PolnCalibration;
polcal-> set_database_filename (config->calibrator_database_filename);
if (kernel)
{
if (!response_product)
response_product = new ResponseProduct;
response_product->add_response (polcal);
response_product->add_response (kernel);
response_product->set_copy_index (0);
response_product->set_match_index (1);
response = response_product;
}
}
// convolved and filterbank are out of place
TimeSeries* filterbanked = unpacked;
// filterbank is performing channelisation
if (config->filterbank.get_nchan() > 1)
{
// new storage for filterbank output (must be out-of-place)
filterbanked = new_time_series ();
#if HAVE_CUDA
if (run_on_gpu)
filterbanked->set_memory (device_memory);
#endif
config->filterbank.set_device( device_memory.ptr() );
config->filterbank.set_stream( gpu_stream );
// software filterbank constructor
if (!filterbank)
filterbank = config->filterbank.create();
if (!config->input_buffering)
filterbank->set_buffering_policy (NULL);
filterbank->set_input (unpacked);
filterbank->set_output (filterbanked);
if (config->filterbank.get_convolve_when() == Filterbank::Config::During)
{
filterbank->set_response (response);
if (!config->integration_turns)
filterbank->set_passband (passband);
}
// Get order of operations correct
if (!config->filterbank.get_convolve_when() == Filterbank::Config::Before)
operations.push_back (filterbank.get());
}
// output of convolved will be filterbanked|unpacked
TimeSeries* convolved = filterbanked;
bool filterbank_after_dedisp
= config->filterbank.get_convolve_when() == Filterbank::Config::Before;
if (config->coherent_dedispersion &&
config->filterbank.get_convolve_when() != Filterbank::Config::During)
{
if (!convolution)
convolution = new Convolution;
if (!config->input_buffering)
convolution->set_buffering_policy (NULL);
convolution->set_response (response);
if (!config->integration_turns)
convolution->set_passband (passband);
convolved = new_time_series();
if (filterbank_after_dedisp)
{
convolution->set_input (filterbanked);
convolution->set_output (convolved); // out of place
}
else
{
convolution->set_input (filterbanked);
convolution->set_output (convolved); // out of place
}
#if HAVE_CUDA
if (run_on_gpu)
{
convolved->set_memory (device_memory);
convolution->set_device (device_memory.ptr());
unsigned nchan = manager->get_info()->get_nchan() * config->filterbank.get_nchan();
if (nchan >= 16)
convolution->set_engine (new CUDA::ConvolutionEngineSpectral (stream));
else
convolution->set_engine (new CUDA::ConvolutionEngine (stream));
}
#endif
operations.push_back (convolution.get());
}
if (filterbank_after_dedisp)
prepare_interchan (convolved);
else
prepare_interchan (convolved);
if (filterbank_after_dedisp && filterbank)
operations.push_back (filterbank.get());
if (config->plfb_nbin)
{
// Set up output
Archiver* archiver = new Archiver;
unloader.resize(1);
unloader[0] = archiver;
prepare_archiver( archiver );
if (!phased_filterbank)
{
if (output_subints())
{
Subint<PhaseLockedFilterbank> *sub_plfb =
new Subint<PhaseLockedFilterbank>;
if (config->integration_length)
{
sub_plfb->set_subint_seconds (config->integration_length);
}
else if (config->integration_turns)
{
sub_plfb->set_subint_turns (config->integration_turns);
sub_plfb->set_fractional_pulses (config->fractional_pulses);
}
sub_plfb->set_unloader (unloader[0]);
phased_filterbank = sub_plfb;
}
else
{
phased_filterbank = new PhaseLockedFilterbank;
}
}
phased_filterbank->set_nbin (config->plfb_nbin);
phased_filterbank->set_npol (config->npol);
if (config->plfb_nchan)
phased_filterbank->set_nchan (config->plfb_nchan);
phased_filterbank->set_input (convolved);
if (!phased_filterbank->has_output())
phased_filterbank->set_output (new PhaseSeries);
phased_filterbank->bin_divider.set_reference_phase(config->reference_phase);
// Make dummy fold instance so that polycos get created
fold.resize(1);
fold[0] = new dsp::Fold;
if (config->folding_period)
fold[0]->set_folding_period (config->folding_period);
if (config->ephemerides.size() > 0)
fold[0]->set_pulsar_ephemeris ( config->ephemerides[0] );
else if (config->predictors.size() > 0)
fold[0]->set_folding_predictor ( config->predictors[0] );
fold[0]->set_output ( phased_filterbank->get_output() );
fold[0]->prepare ( manager->get_info() );
operations.push_back (phased_filterbank.get());
path.resize(1);
path[0] = new SignalPath (operations);
return;
// the phase-locked filterbank does its own detection and folding
}
Reference::To<Fold> presk_fold;
Reference::To<Archiver> presk_unload;
TimeSeries * cleaned = convolved;
// peform zapping based on the results of the SKFilterbank
if (config->sk_zap)
{
if (config->nosk_too)
{
Detection* presk_detect = new Detection;
// set up an out-of-place detection to effect a fork in the signal path
TimeSeries* presk_detected = new_time_series();
#if HAVE_CUDA
if (run_on_gpu)
presk_detected->set_memory (device_memory);
#endif
presk_detect->set_input (convolved);
presk_detect->set_output (presk_detected);
configure_detection (presk_detect, 0);
operations.push_back (presk_detect);
presk_unload = new Archiver;
presk_unload->set_extension( ".nosk" );
prepare_archiver( presk_unload );
build_fold (presk_fold, presk_unload);
presk_fold->set_input( presk_detected );
#if HAVE_CUDA
if (run_on_gpu)
presk_fold->set_engine (new CUDA::FoldEngine(stream, false));
#endif
presk_fold->prepare( manager->get_info() );
presk_fold->reset();
operations.push_back (presk_fold.get());
}
cleaned = new_time_series();
if (!skestimator)
skestimator = new SpectralKurtosis();
if (!config->input_buffering)
skestimator->set_buffering_policy (NULL);
skestimator->set_input (convolved);
skestimator->set_output (cleaned);
skestimator->set_M (config->sk_m);
#if HAVE_CUDA
if (run_on_gpu)
{
// for input buffering
convolved->set_engine (new CUDA::TimeSeriesEngine (device_memory));
cleaned->set_memory (device_memory);
skestimator->set_engine (new CUDA::SpectralKurtosisEngine (device_memory));
}
#endif
skestimator->set_thresholds (config->sk_m, config->sk_std_devs);
if (config->sk_chan_start > 0 && config->sk_chan_end < config->filterbank.get_nchan())
skestimator->set_channel_range (config->sk_chan_start, config->sk_chan_end);
skestimator->set_options (config->sk_no_fscr, config->sk_no_tscr, config->sk_no_ft);
operations.push_back (skestimator.get());
}
// Cyclic spectrum also detects and folds
if (config->cyclic_nchan)
{
build_fold(cleaned);
return;
}
if (!detect)
detect = new Detection;
TimeSeries* detected = cleaned;
detect->set_input (cleaned);
detect->set_output (cleaned);
configure_detection (detect, noperations);
operations.push_back (detect.get());
if (config->npol == 3)
{
detected = new_time_series ();
detect->set_output (detected);
}
else if (config->fourth_moment)
{
if (Operation::verbose)
cerr << "LoadToFold::construct fourth order moments" << endl;
FourthMoment* fourth = new FourthMoment;
operations.push_back (fourth);
fourth->set_input (detected);
detected = new_time_series ();
fourth->set_output (detected);
}
build_fold (detected);
if (presk_fold)
{
// presk fold and unload are pushed back after the primary ones are built
fold.push_back( presk_fold );
unloader.push_back( presk_unload.get() );
}
if (config->sk_fold)
{
PhaseSeriesUnloader* unload = get_unloader( get_nfold() );
unload->set_extension( ".sk" );
Reference::To<Fold> skfold;
build_fold (skfold, unload);
skfold->set_input( cleaned);
skfold->prepare( manager->get_info() );
skfold->reset();
fold.push_back( skfold );
operations.push_back( skfold.get() );
}
}
catch (Error& error)
{
throw error += "dsp::LoadToFold::construct";
}
void dsp::LoadToFITS::construct () try
{
// sets operations to zero length then adds IOManger/unpack
SingleThread::construct ();
bool run_on_gpu = false;
#if HAVE_CUDA
run_on_gpu = thread_id < config->get_cuda_ndevice();
cudaStream_t stream = reinterpret_cast<cudaStream_t>( gpu_stream );
#endif
/*
The following lines "wire up" the signal path, using containers
to communicate the data between operations.
*/
// set up for optimal memory usage pattern
Unpacker* unpacker = manager->get_unpacker();
if (!config->dedisperse && unpacker->get_order_supported (config->order))
unpacker->set_output_order (config->order);
// get basic information about the observation
Observation* obs = manager->get_info();
const unsigned nchan = obs->get_nchan ();
const unsigned npol = obs->get_npol ();
const unsigned ndim = obs->get_ndim ();
const double rate = obs->get_rate () ;
if (verbose)
{
cerr << "Source = " << obs->get_source() << endl;
cerr << "Frequency = " << obs->get_centre_frequency() << endl;
cerr << "Bandwidth = " << obs->get_bandwidth() << endl;
cerr << "Channels = " << nchan << endl;
cerr << "Sampling rate = " << rate << endl;
cerr << "State = " << tostring(obs->get_state()) <<endl;
}
obs->set_dispersion_measure( config->dispersion_measure );
unsigned fb_nchan = config->filterbank.get_nchan();
unsigned nsample;
double tsamp, samp_per_fb;
unsigned tres_factor;
double factor = obs->get_state() == Signal::Nyquist? 0.5 : 1.0;
if (fb_nchan > 0)
{
// Strategy will be to tscrunch from Nyquist resolution to desired reso.
// voltage samples per filterbank sample
samp_per_fb = config->tsamp * rate;
if (verbose)
cerr << "voltage samples per filterbank sample="<<samp_per_fb << endl;
// correction for number of samples per filterbank channel
tres_factor = round(factor*samp_per_fb/fb_nchan);
tsamp = tres_factor/factor*fb_nchan/rate;
// voltage samples per output block
nsample = round(samp_per_fb * config->nsblk);
}
else
{
samp_per_fb = 1.0;
tres_factor = round(rate * config->tsamp);
tsamp = tres_factor/factor * 1/rate;
nsample = config->nsblk * tres_factor;
}
cerr << "digifits: requested tsamp=" << config->tsamp << " rate=" << rate << endl
<< " actual tsamp=" << tsamp << " (tscrunch=" << tres_factor << ")" << endl;
if (verbose)
cerr << "digifits: nsblk=" << config->nsblk << endl;
// the unpacked input will occupy nbytes_per_sample
double nbytes_per_sample = sizeof(float) * nchan * npol * ndim;
double MB = 1024.0 * 1024.0;
// ideally, block size would be a full output block, but this is too large
// pick a nice fraction that will divide evently into maximum RAM
// NB this doesn't account for copies (yet)
if (verbose)
cerr << "digifits: nsample * nbytes_per_sample=" << nsample * nbytes_per_sample
<< " config->maximum_RAM=" << config->maximum_RAM << endl;
while (nsample * nbytes_per_sample > config->maximum_RAM) nsample /= 2;
if (verbose)
cerr << "digifits: block_size=" << (nbytes_per_sample*nsample)/MB
<< " MB " << "(" << nsample << " samp)" << endl;
manager->set_block_size ( nsample );
// if running on multiple GPUs, make nsblk such that no buffering is
// required
if ((run_on_gpu) and (config->get_total_nthread() > 1))
{
config->nsblk = nsample / samp_per_fb;
if (verbose)
cerr << "digifits: due to GPU multi-threading, setting nsblk="<<config->nsblk << endl;
}
TimeSeries* timeseries = unpacked;
#if HAVE_CUDA
if (run_on_gpu)
{
timeseries->set_memory (device_memory);
timeseries->set_engine (new CUDA::TimeSeriesEngine (device_memory));
}
#endif
if (!obs->get_detected())
{
cerr << "digifits: input data not detected" << endl;
// if no filterbank specified
if ((fb_nchan == 0) && (nchan == 1))
{
throw Error(InvalidParam,"dsp::LoadToFITS::construct",
"must specify filterbank scheme if single channel data");
}
if ((config->coherent_dedisp) && (config->dispersion_measure != 0.0))
{
cerr << "digifits: performing coherent dedispersion" << endl;
kernel = new Dedispersion;
kernel->set_dispersion_measure( config->dispersion_measure );
unsigned frequency_resolution = config->filterbank.get_freq_res ();
cerr << "digifits: config->filterbank.get_freq_res= " << frequency_resolution << endl;
if (frequency_resolution)
{
cerr << "digifits: setting filter length to " << frequency_resolution << endl;
//kernel->set_frequency_resolution (frequency_resolution);
kernel -> set_times_minimum_nfft (frequency_resolution);
}
}
else
{
if (config->dispersion_measure != 0.0)
cerr << "digifits: performing incoherent dedispersion" << endl;
config->coherent_dedisp = false;
}
// filterbank is performing channelisation
if (config->filterbank.get_nchan() > 1)
{
// If user specifies -FN:D, enable coherent dedispersion
if (config->filterbank.get_convolve_when() == Filterbank::Config::During)
{
// during is the only option for filterbank
config->filterbank.set_convolve_when( Filterbank::Config::During );
}
else
{
config->coherent_dedisp = false;
}
#if HAVE_CUDA
if (run_on_gpu)
{
config->filterbank.set_device ( device_memory.ptr() );
config->filterbank.set_stream ( gpu_stream );
}
#endif
filterbank = config->filterbank.create ();
filterbank->set_nchan( config->filterbank.get_nchan() );
filterbank->set_input( timeseries );
filterbank->set_output( timeseries = new_TimeSeries() );
#if HAVE_CUDA
if (run_on_gpu)
timeseries->set_memory (device_memory);
#endif
if (config->coherent_dedisp && kernel)
filterbank->set_response( kernel );
if ( !config->coherent_dedisp )
{
unsigned freq_res = config->filterbank.get_freq_res();
if (freq_res > 1)
filterbank->set_frequency_resolution ( freq_res );
}
operations.push_back( filterbank.get() );
}
// if convolution does not happen during filterbanking
if (config->coherent_dedisp && config->filterbank.get_convolve_when() != Filterbank::Config::During)
{
cerr << "digifits: creating convolution operation" << endl;
if (!convolution)
convolution = new Convolution;
if (!config->input_buffering)
convolution->set_buffering_policy (NULL);
convolution->set_response (kernel);
//if (!config->integration_turns)
// convolution->set_passband (passband);
convolution->set_input (timeseries);
convolution->set_output (timeseries = new_TimeSeries() ); // out of place
#if HAVE_CUDA
if (run_on_gpu)
{
timeseries->set_memory (device_memory);
convolution->set_device (device_memory.ptr());
unsigned nchan = manager->get_info()->get_nchan();
if (fb_nchan)
nchan *= fb_nchan;
if (nchan >= 16)
convolution->set_engine (new CUDA::ConvolutionEngineSpectral (stream));
else
convolution->set_engine (new CUDA::ConvolutionEngine (stream));
}
#endif
operations.push_back (convolution.get());
}
if (verbose)
cerr << "digifits: creating detection operation" << endl;
Detection* detection = new Detection;
detection->set_input ( timeseries );
// always use coherence for GPU, pscrunch later if needed
if (run_on_gpu)
{
#ifdef HAVE_CUDA
if (npol == 2)
{
detection->set_output_state (Signal::Coherence);
detection->set_engine (new CUDA::DetectionEngine(stream) );
detection->set_output_ndim (2);
detection->set_output (timeseries);
}
else
{
detection->set_output_state (Signal::Intensity);
detection->set_engine (new CUDA::DetectionEngine(stream) );
detection->set_output (timeseries = new_TimeSeries());
cerr << "detection->set_output(timeseries = newTimeSeries())" << endl;
detection->set_output_ndim (1);
timeseries->set_memory (device_memory);
}
#endif
}
else
{
switch (config->npol)
{
case 1:
detection->set_output_state (Signal::Intensity);
//detected = new_TimeSeries();
break;
case 2:
detection->set_output_state (Signal::PPQQ);
//detected = new_TimeSeries();
break;
case 4:
detection->set_output_state (Signal::Coherence);
// use this to avoid copies -- seem to segfault in multi-threaded
//detection->set_output_ndim (2);
break;
default:
throw Error(InvalidParam,"dsp::LoadToFITS::construct",
"invalid polarization specified");
}
detection->set_output (timeseries);
}
operations.push_back ( detection );
}
#if HAVE_CUDA
if (run_on_gpu)
{
// to support input buffering
timeseries->set_engine (new CUDA::TimeSeriesEngine (device_memory));
}
#endif
TScrunch* tscrunch = new TScrunch;
tscrunch->set_factor ( tres_factor );
tscrunch->set_input ( timeseries );
tscrunch->set_output ( timeseries = new_TimeSeries() );
#if HAVE_CUDA
if ( run_on_gpu )
{
tscrunch->set_engine ( new CUDA::TScrunchEngine(stream) );
timeseries->set_memory (device_memory);
}
#endif
operations.push_back( tscrunch );
#if HAVE_CUDA
if (run_on_gpu)
{
TransferCUDA* transfer = new TransferCUDA (stream);
transfer->set_kind (cudaMemcpyDeviceToHost);
transfer->set_input( timeseries );
transfer->set_output( timeseries = new_TimeSeries() );
operations.push_back (transfer);
}
#endif
// need to do PolnReshape if have done on GPU (because uses the
// hybrid npol=2, ndim=2 for the Stokes parameters)
if (run_on_gpu)
{
PolnReshape* reshape = new PolnReshape;
switch (config->npol)
{
case 4:
reshape->set_state ( Signal::Coherence );
break;
case 2:
reshape->set_state ( Signal::PPQQ );
break;
case 1:
reshape->set_state ( Signal::Intensity );
break;
default:
throw Error(InvalidParam,"dsp::LoadToFITS::construct",
"invalid polarization specified");
}
reshape->set_input (timeseries );
reshape->set_output ( timeseries = new_TimeSeries() );
operations.push_back(reshape);
}
//else if (config->npol == 4)
else if (false)
{
PolnReshape* reshape = new PolnReshape;
reshape->set_state ( Signal::Coherence );
reshape->set_input (timeseries );
reshape->set_output ( timeseries = new_TimeSeries() );
operations.push_back (reshape);
}
if ( config->dedisperse )
{
//if (verbose)
cerr << "digifits: removing dispersion delays" << endl;
SampleDelay* delay = new SampleDelay;
delay->set_input (timeseries);
delay->set_output (timeseries);
delay->set_function (new Dedispersion::SampleDelay);
operations.push_back( delay );
}
// only do pscrunch for detected data -- NB always goes to Intensity
bool do_pscrunch = (obs->get_npol() > 1) && (config->npol==1)
&& (obs->get_detected());
if (do_pscrunch)
{
//if (verbose)
cerr << "digifits: creating pscrunch transformation" << endl;
PScrunch* pscrunch = new PScrunch;
pscrunch->set_input (timeseries);
pscrunch->set_output (timeseries);
operations.push_back( pscrunch );
}
if (verbose)
cerr << "digifits: creating output bitseries container" << endl;
BitSeries* bitseries = new BitSeries;
if (verbose)
cerr << "digifits: creating PSRFITS digitizer with nbit="
<< config->nbits << endl;
FITSDigitizer* digitizer = new FITSDigitizer (config->nbits);
digitizer->set_input (timeseries);
digitizer->set_output (bitseries);
// PSRFITS allows us to save the reference spectrum in each output block
// "subint", so we can take advantage of this to store the exect
// reference spectrum for later use. By default, we will rescale the
// spectrum using values for exactly one block (nsblk samples). This
// potentially improves the dynamic range, but makes the observaiton more
// subject to transiennts. By calling set_rescale_nblock(N), the path
// will keep a running mean/scale for N sample blocks. This is presented
// to the user through rescale_seconds, which will choose the appropriate
// block length to approximate the requested time interval.
digitizer->set_rescale_samples (config->nsblk);
if (config->rescale_constant)
{
cerr << "digifits: holding scales and offsets constant" << endl;
digitizer->set_rescale_constant (true);
}
else if (config->rescale_seconds > 0)
{
double tblock = config->tsamp * config->nsblk;
unsigned nblock = unsigned ( config->rescale_seconds/tblock + 0.5 );
if (nblock < 1) nblock = 1;
digitizer->set_rescale_nblock (nblock);
cerr << "digifits: using "<<nblock<<" blocks running mean for scales and constant ("<<tblock*nblock<<") seconds"<<endl;
}
operations.push_back( digitizer );
if (verbose)
cerr << "digifits: creating PSRFITS output file" << endl;
const char* output_filename = 0;
if (!config->output_filename.empty())
output_filename = config->output_filename.c_str();
FITSOutputFile* outputfile = new FITSOutputFile (output_filename);
outputfile->set_nsblk (config->nsblk);
outputfile->set_nbit (config->nbits);
outputfile->set_max_length (config->integration_length);
outputFile = outputfile;
outputFile->set_input (bitseries);
operations.push_back( outputFile.get() );
// add a callback for the PSRFITS reference spectrum
digitizer->update.connect (
dynamic_cast<FITSOutputFile*> (outputFile.get()),
&FITSOutputFile::set_reference_spectrum);
}
catch (Error& error)
{
throw error += "dsp::LoadToFITS::construct";
}
void NetExplosion::read(Unpacker & unpacker)
{
unpacker.unpack(pos.x);
unpacker.unpack(pos.y);
}
void NetGameDataTdm::read(Unpacker & unpacker)
{
unpacker.unpack(scoreA);
unpacker.unpack(scoreB);
}
void
PkChar::Unpack ()
{
if (pUnpackedRaster != 0)
{
return;
}
int dynf = flag >> 4;
Unpacker unp (pPackedRaster, dynf);
numberOfRasterWords =
(rasterWidth + bitsPerRasterWord - 1) / bitsPerRasterWord;
if (rasterWidth == 0 || rasterHeight == 0)
{
#if 0
UNEXPECTED_CONDITION ("PkChar::Unpack");
#endif
return;
}
pUnpackedRaster = new RASTERWORD[rasterHeight * numberOfRasterWords];
RASTERWORD rword = 0;
RASTERWORD * pUnpackedRaster = this->pUnpackedRaster;
bool turnOn = (flag & 8 ? true : false);
if (dynf == 14)
{
// get raster by bits
unp.ResetBitWeight ();
for (int i = 1; i <= rasterHeight; ++ i)
{
rword = 0;
unp.rasterWordHeight = bitsPerRasterWord - 1;
for (int j = 1; j <= rasterWidth; ++ j)
{
if (unp.GetBit())
{
rword =
static_cast<RASTERWORD>
(rword
+ powerOfTwo[unp.rasterWordHeight]);
}
-- unp.rasterWordHeight;
if (unp.rasterWordHeight == -1)
{
*pUnpackedRaster++ = rword;
rword = 0;
unp.rasterWordHeight = bitsPerRasterWord - 1;
}
}
if (unp.rasterWordHeight < bitsPerRasterWord - 1)
{
*pUnpackedRaster++ = rword;
}
}
}
else
{
// create normally packed raster
int rows_left = rasterHeight; // how many rows left?
int h_bit = rasterWidth; // what is our horizontal position?
unp.repeatCount = 0;
unp.rasterWordHeight = bitsPerRasterWord;
rword = 0;
while (rows_left > 0)
{
int count;
count =
unp.GetPackedNumber(); // how many bits of current color left?
while (count > 0)
{
if ((count < unp.rasterWordHeight) && (count < h_bit))
{
if (turnOn)
{
rword =
static_cast<RASTERWORD>
(rword
+ (gpower[ unp.rasterWordHeight ]
- gpower[ unp.rasterWordHeight - count ]));
}
h_bit -= count;
unp.rasterWordHeight -= count;
count = 0;
}
else if ((count >= h_bit) && (h_bit <= unp.rasterWordHeight))
{
if (turnOn)
{
rword =
static_cast<RASTERWORD>
(rword
+ (gpower[ unp.rasterWordHeight ]
- gpower[ unp.rasterWordHeight - h_bit ]));
}
*pUnpackedRaster++ = rword;
// Send row
for (int i = 1; i <= unp.repeatCount; ++ i)
{
for (int j = 1;
j <= numberOfRasterWords;
++ j, ++ pUnpackedRaster)
{
*pUnpackedRaster
= pUnpackedRaster[ - numberOfRasterWords ];
}
}
rows_left = rows_left - unp.repeatCount - 1;
unp.repeatCount = 0;
rword = 0;
unp.rasterWordHeight = bitsPerRasterWord;
count -= h_bit;
h_bit = rasterWidth;
}
else
{
if (turnOn)
{
rword =
static_cast<RASTERWORD>
(rword
+ gpower[unp.rasterWordHeight]);
}
*pUnpackedRaster++ = rword;
rword = 0;
count -= unp.rasterWordHeight;
h_bit -= unp.rasterWordHeight;
unp.rasterWordHeight = bitsPerRasterWord;
}
}
turnOn = (turnOn ? false : true);
}
if ((rows_left != 0) || (h_bit != rasterWidth))
{
UNEXPECTED_CONDITION ("PkChar::Unpack");
}
}
}
void dsp::LoadToFil::construct () try
{
SingleThread::construct ();
/*
The following lines "wire up" the signal path, using containers
to communicate the data between operations.
*/
// set up for optimal memory usage pattern
Unpacker* unpacker = manager->get_unpacker();
if (!config->dedisperse && unpacker->get_order_supported (config->order))
unpacker->set_output_order (config->order);
// get basic information about the observation
Observation* obs = manager->get_info();
const unsigned nchan = obs->get_nchan ();
const unsigned npol = obs->get_npol ();
const unsigned ndim = obs->get_ndim ();
if (verbose)
{
cerr << "Source = " << obs->get_source() << endl;
cerr << "Frequency = " << obs->get_centre_frequency() << endl;
cerr << "Bandwidth = " << obs->get_bandwidth() << endl;
cerr << "Sampling rate = " << obs->get_rate() << endl;
}
obs->set_dispersion_measure( config->dispersion_measure );
// the unpacked input will occupy nbytes_per_sample
double nbytes_per_sample = sizeof(float) * nchan * npol * ndim;
double MB = 1024.0 * 1024.0;
uint64_t nsample = uint64_t( config->block_size*MB / nbytes_per_sample );
if (verbose)
cerr << "digifil: block_size=" << config->block_size << " MB "
"(" << nsample << " samp)" << endl;
manager->set_block_size( nsample );
bool do_pscrunch = (config->npol==1) && (obs->get_npol() > 1)
&& (config->poln_select < 0);
TimeSeries* timeseries = unpacked;
if ( config->poln_select >= 0 )
{
PolnSelect *pselect = new PolnSelect;
pselect->set_ipol (config->poln_select);
pselect->set_input (timeseries);
pselect->set_output (timeseries);
operations.push_back( pselect );
}
if (!obs->get_detected())
{
bool do_detection = false;
config->coherent_dedisp =
(config->filterbank.get_convolve_when() == Filterbank::Config::During)
&& (config->dispersion_measure != 0.0);
if ( config->filterbank.get_nchan() )
{
if (verbose)
cerr << "digifil: creating " << config->filterbank.get_nchan()
<< " channel filterbank" << endl;
if ( config->coherent_dedisp )
{
cerr << "digifil: using coherent dedispersion" << endl;
kernel = new Dedispersion;
if (config->filterbank.get_freq_res())
kernel->set_frequency_resolution (config->filterbank.get_freq_res());
kernel->set_dispersion_measure( config->dispersion_measure );
// TODO other FFT length/etc options as implemented in LoadToFold1?
}
if ( config->filterbank.get_freq_res()
|| config->coherent_dedisp
|| (config->npol>2) )
{
cerr << "digifil: using convolving filterbank" << endl;
filterbank = new Filterbank;
filterbank->set_nchan( config->filterbank.get_nchan() );
filterbank->set_input( timeseries );
filterbank->set_output( timeseries = new_TimeSeries() );
if (kernel)
filterbank->set_response( kernel );
if ( config->filterbank.get_freq_res() )
filterbank->set_frequency_resolution (
config->filterbank.get_freq_res() );
operations.push_back( filterbank.get() );
do_detection = true;
}
else
{
filterbank = new TFPFilterbank;
filterbank->set_nchan( config->filterbank.get_nchan() );
filterbank->set_input( timeseries );
filterbank->set_output( timeseries = new_TimeSeries() );
operations.push_back( filterbank.get() );
}
}
else
do_detection = true;
if ( config->dedisperse )
{
if (verbose)
cerr << "digifil: removing dispersion delays" << endl;
SampleDelay* delay = new SampleDelay;
delay->set_input (timeseries);
delay->set_output (timeseries);
delay->set_function (new Dedispersion::SampleDelay);
operations.push_back( delay );
}
if (do_detection)
{
if (verbose)
cerr << "digifil: creating detection operation (npol=" <<
config->npol << ")" << endl;
Detection* detection = new Detection;
detection->set_input( timeseries );
detection->set_output( timeseries );
if (config->npol==1)
detection->set_output_state(Signal::Intensity);
else if (config->npol==2)
detection->set_output_state(Signal::PPQQ);
else if (config->npol==3)
detection->set_output_state(Signal::NthPower);
else if (config->npol==4)
{
detection->set_output_state(Signal::Coherence);
//detection->set_output_ndim(4);
}
// detection will do pscrunch if necessary
do_pscrunch = false;
operations.push_back( detection );
}
}
else { // Data already detected
if ( config->dedisperse )
{
if (verbose)
cerr << "digifil: removing dispersion delays (post-detection)" << endl;
SampleDelay* delay = new SampleDelay;
delay->set_input (timeseries);
delay->set_output (timeseries);
delay->set_function (new Dedispersion::SampleDelay);
operations.push_back( delay );
}
}
if ( config->fscrunch_factor )
{
FScrunch* fscrunch = new FScrunch;
fscrunch->set_factor( config->fscrunch_factor );
fscrunch->set_input( timeseries );
fscrunch->set_output( timeseries );
operations.push_back( fscrunch );
}
if ( config->tscrunch_factor )
{
TScrunch* tscrunch = new TScrunch;
tscrunch->set_factor( config->tscrunch_factor );
tscrunch->set_input( timeseries );
tscrunch->set_output( timeseries );
operations.push_back( tscrunch );
}
if ( config->rescale_seconds )
{
if (verbose)
cerr << "digifil: creating rescale transformation" << endl;
Rescale* rescale = new Rescale;
rescale->set_input (timeseries);
rescale->set_output (timeseries);
rescale->set_constant (config->rescale_constant);
rescale->set_interval_seconds (config->rescale_seconds);
operations.push_back( rescale );
}
if (do_pscrunch)
{
if (verbose)
cerr << "digifil: creating pscrunch transformation" << endl;
PScrunch* pscrunch = new PScrunch;
pscrunch->set_input (timeseries);
pscrunch->set_output (timeseries);
operations.push_back( pscrunch );
}
if (verbose)
cerr << "digifil: creating output bitseries container" << endl;
BitSeries* bitseries = new BitSeries;
if (verbose)
cerr << "digifil: creating sigproc digitizer" << endl;
SigProcDigitizer* digitizer = new SigProcDigitizer;
digitizer->set_nbit (config->nbits);
digitizer->set_input (timeseries);
digitizer->set_output (bitseries);
digitizer->set_scale (config->scale_fac);
// If Rescale is not in use, the scale/offset settings in the digitizer do
// not make sense, so this disables them:
if (config->rescale_seconds == 0.0) digitizer->use_digi_scales(false);
operations.push_back( digitizer );
if (verbose)
cerr << "digifil: creating sigproc output file" << endl;
const char* output_filename = 0;
if (!config->output_filename.empty())
output_filename = config->output_filename.c_str();
outputFile = new SigProcOutputFile (output_filename);
outputFile->set_input (bitseries);
operations.push_back( outputFile.get() );
}
catch (Error& error)
{
throw error += "dsp::LoadToFil::construct";
}
