QString RandomNameProvider::generateRandomName()
{
static WordList words;
return words.at(std::abs(iscore::random_id_generator::getRandomId() % (words.size() - 1))) +
QString::number(std::abs(iscore::random_id_generator::getRandomId() % 99)) +
words.at(std::abs(iscore::random_id_generator::getRandomId() % (words.size() - 1))) +
QString::number(std::abs(iscore::random_id_generator::getRandomId() % 99));
}
void FrequencyMap::remove( const WordList& wordList )
{
for ( int j=0; j<wordList.size(); ++j )
{
remove(wordList[j]);
}
}
void FrequencyMap::build( const WordList& wordList )
{
for ( int j=0; j<wordList.size(); ++j )
{
add(wordList[j]);
}
}
void laydata::tdtlibrary::collect_usedlays(WordList& laylist) const
{
for (cellList::const_iterator CC = _cells.begin(); CC != _cells.end(); CC++)
{
CC->second->collect_usedlays(NULL, false,laylist);
}
laylist.sort();
laylist.unique();
if ( (0 < laylist.size()) && (0 == laylist.front()) )
laylist.pop_front();
}
void filterSentences( SentenceList& sentenceList, const WordList& words )
{
std::set<Word> wordSet;
int i;
for ( i=0; i<words.size(); ++i )
{
wordSet.insert(words[i]);
}
for ( i=0; i<sentenceList.size(); ++i )
{
WordList& wordList = sentenceList[i].words;
for ( int j=0; j<wordList.size(); ++j )
{
if ( wordSet.find(wordList[j]) == wordSet.end() )
{
wordList.erase(wordList.begin()+j);
--j;
}
}
}
}
void SpellCheckProcessor::process(QFutureInterface<WordList> &future)
{
#ifdef BENCH_TIME
QElapsedTimer timer;
timer.start();
#endif /* BENCH_TIME */
WordListConstIter misspelledIter;
WordListConstIter prevMisspelledIter;
Word misspelledWord;
WordList misspelledWords;
WordList words = d_wordList;
WordListConstIter wordIter = words.constBegin();
bool spellingMistake;
future.setProgressRange(0, words.count() + 1);
while(wordIter != d_wordList.constEnd()) {
/* Get the word at the current iterator position.
* After this is done, move the iterator to the next position and
* increment the progress value. This is done so that one can call
* 'continue' anywhere after this in the loop without having to worry
* about advancing the iterator since this will already be done and
* correct for the next iteration. */
misspelledWord = (*wordIter);
++wordIter;
future.setProgressValue(future.progressValue() + 1);
/* Check if the future was cancelled */
if(future.isCanceled() == true) {
return;
}
spellingMistake = d_spellChecker->isSpellingMistake(misspelledWord.text);
/* Check to see if the char after the word is a period. If it is,
* add the period to the word an see if it passes the checker. */
if((spellingMistake == true)
&& (misspelledWord.charAfter == QLatin1Char('.'))) {
/* Recheck the word with the period added */
spellingMistake = d_spellChecker->isSpellingMistake(misspelledWord.text + QLatin1Char('.'));
}
if(spellingMistake == true) {
/* The word is a spelling mistake, check if the word was a mistake
* the previous time that this file was processed. If it was the
* suggestions can be reused without having to get the suggestions
* through the spell checker since this is slow compared to the rest
* of the processing. */
prevMisspelledIter = d_previousMistakes.find(misspelledWord.text);
if(prevMisspelledIter != d_previousMistakes.constEnd()) {
misspelledWord.suggestions = (*prevMisspelledIter).suggestions;
misspelledWords.append(misspelledWord);
continue;
}
/* The word was not in the previous iteration, search for the word
* in the list of words that were already checked in this iteration
* and identified as spelling mistakes. If there are words that are
* repeated and misspelled, this can reduce the time to process
* the file since the time to get suggestions is rather slow.
* If there are no repeating mistakes then this might add unneeded
* overhead. */
misspelledIter = misspelledWords.find(misspelledWord.text);
if(misspelledIter != misspelledWords.constEnd()) {
misspelledWord.suggestions = (*misspelledIter).suggestions;
/* Add the word to the local list of misspelled words. */
misspelledWords.append(misspelledWord);
continue;
}
/* At this point the word is a mistake for the first time. It was neither
* a mistake in the previous pass of the file nor did the word occur previously
* in this file, use the spell checker to get the suggestions for the word. */
d_spellChecker->getSuggestionsForWord(misspelledWord.text, misspelledWord.suggestions);
/* Add the word to the local list of misspelled words. */
misspelledWords.append(misspelledWord);
}
}
#ifdef BENCH_TIME
qDebug() << "File: " << d_fileName
<< "\n - time : " << timer.elapsed()
<< "\n - count: " << misspelledWords.size();
#endif /* BENCH_TIME */
future.reportResult(misspelledWords);
}
void SpellCheckerCore::addMisspelledWords( const QString& fileName, const WordList& words )
{
d->spellingMistakesModel->insertSpellingMistakes( fileName, words, d->filesInStartupProject.contains( fileName ) );
if( d->currentFilePath == fileName ) {
d->mistakesModel->setCurrentSpellingMistakes( words );
}
/* Only apply the underlines to the current file. This is done so that if the
* whole project is scanned, it does not add selections to pages that might
* potentially never be opened. This can especially be a problem in large
* projects.
*/
if( d->currentFilePath != fileName ) {
return;
}
TextEditor::BaseTextEditor* baseEditor = qobject_cast<TextEditor::BaseTextEditor*>( d->currentEditor );
if( baseEditor == nullptr ) {
return;
}
TextEditor::TextEditorWidget* editorWidget = baseEditor->editorWidget();
if( editorWidget == nullptr ) {
return;
}
QTextDocument* document = editorWidget->document();
if( document == nullptr ) {
return;
}
QList<QTextEdit::ExtraSelection> selections;
selections.reserve( words.size() );
const WordList::ConstIterator wordsEnd = words.constEnd();
for( WordList::ConstIterator wordIter = words.constBegin(); wordIter != wordsEnd; ++wordIter ) {
const Word& word = wordIter.value();
/* Get the QTextBlock for the line that the misspelled word is on.
* The QTextDocument manages lines as blocks (in most cases).
* The lineNumber of the misspelled word is 1 based (seen in the editor)
* but the blocks on the QTextDocument are 0 based, thus minus one
* from the line number to get the correct line.
* If the block is valid, and the word is not longer than the number of
* characters in the block (which should normally not be the case)
* then the cursor is moved to the correct column, and the word is
* underlined.
* Again the Columns on the misspelled word is 1 based but
* the blocks and cursor are 0 based. */
const QTextBlock& block = document->findBlockByNumber( int32_t( word.lineNumber ) - 1 );
if( ( block.isValid() == false )
|| ( uint32_t( block.length() ) < ( word.columnNumber - 1 + uint32_t( word.length ) ) ) ) {
continue;
}
QTextCursor cursor( block );
cursor.setPosition( cursor.position() + int32_t( word.columnNumber ) - 1 );
cursor.movePosition( QTextCursor::Right, QTextCursor::KeepAnchor, word.length );
/* Get the current format from the cursor, this is to make sure that the text font
* and color stays the same, we just want to underline the mistake. */
QTextCharFormat format = cursor.charFormat();
format.setFontUnderline( true );
static const QColor underLineColor = QColor( Qt::red );
format.setUnderlineColor( underLineColor );
format.setUnderlineStyle( QTextCharFormat::WaveUnderline );
format.setToolTip( word.suggestions.isEmpty()
? QStringLiteral( "Incorrect spelling" )
: QStringLiteral( "Incorrect spelling, did you mean '%1' ?" ).arg( word.suggestions.first() ) );
QTextEdit::ExtraSelection selection;
selection.cursor = cursor;
selection.format = format;
selections.append( selection );
}
editorWidget->setExtraSelections( Core::Id( SpellChecker::Constants::SPELLCHECK_MISTAKE_ID ), selections );
/* The model updated, check if the word under the cursor is now a mistake
* and notify the rest of the checker with this information. */
Word word;
bool wordIsMisspelled = isWordUnderCursorMistake( word );
emit wordUnderCursorMistake( wordIsMisspelled, word );
}
bool LayerMapGds::parseLayTypeString(wxString exp, word tdtLay)
{
wxString lay_exp, type_exp;
if (!separateQuickLists(exp, lay_exp, type_exp)) return false;
WordList llst;
// get the listed layers
getList( lay_exp , llst);
if (NULL != _alist)
{// GDS to TDT conversion
// ... for every listed layer
for ( WordList::const_iterator CL = llst.begin(); CL != llst.end(); CL++ )
{
// if the layer is listed among the GDS used layers
if ( _alist->end() != _alist->find(*CL) )
{
if (wxT('*') == type_exp)
{ // for all data types
// get all GDS data types for the current layer and copy them
// to the map
for ( WordList::const_iterator CT = (*_alist)[*CL].begin(); CT != (*_alist)[*CL].end(); CT++)
_theMap[*CL].insert(std::make_pair(*CT, tdtLay));
}
else
{// for particular (listed) data type
WordList dtlst;
getList( type_exp , dtlst);
for ( WordList::const_iterator CT = dtlst.begin(); CT != dtlst.end(); CT++)
_theMap[*CL].insert(std::make_pair(*CT, tdtLay));
}
}
// else ignore the mapped GDS layer
}
}
else
{// TDT to GDS conversion
if (1 < llst.size())
{
wxString wxmsg;
wxmsg << wxT("Can't export to multiple layers. Expression \"")
<< lay_exp << wxT("\"")
<< wxT(" is coerced to a single layer ")
<< llst.front();
std::string msg(wxmsg.mb_str(wxConvUTF8));
tell_log(console::MT_ERROR,msg);
}
if (wxT('*') == type_exp)
{ // for all data types - same as data type = 0
_theMap[tdtLay].insert(std::make_pair(0, llst.front()));
}
else
{// for particular (listed) data type
WordList dtlst;
getList( type_exp , dtlst);
if (1 < dtlst.size())
{
wxString wxmsg;
wxmsg << wxT("Can't export to multiple types. Expression \"")
<< type_exp << wxT("\"")
<< wxT(" for layer ") << tdtLay
<< wxT(" is coerced to a single data type ")
<< dtlst.front();
std::string msg(wxmsg.mb_str(wxConvUTF8));
tell_log(console::MT_ERROR,msg);
}
_theMap[tdtLay].insert(std::make_pair(dtlst.front(), llst.front()));
}
}
return true;
}