bool DIALOG_NON_COPPER_ZONES_EDITOR::TransferDataToWindow()
{
m_cornerSmoothingChoice->SetSelection( m_settings.GetCornerSmoothingType() );
m_cornerRadius.SetValue( m_settings.GetCornerRadius() );
m_minWidth.SetValue( m_settings.m_ZoneMinThickness );
m_ConstrainOpt->SetValue( m_settings.m_Zone_45_Only );
switch( m_settings.m_Zone_HatchingStyle )
{
case ZONE_CONTAINER::NO_HATCH: m_OutlineAppearanceCtrl->SetSelection( 0 ); break;
case ZONE_CONTAINER::DIAGONAL_EDGE: m_OutlineAppearanceCtrl->SetSelection( 1 ); break;
case ZONE_CONTAINER::DIAGONAL_FULL: m_OutlineAppearanceCtrl->SetSelection( 2 ); break;
}
SetInitialFocus( m_OutlineAppearanceCtrl );
switch( m_settings.m_FillMode )
{
case ZFM_HATCH_PATTERN:
m_GridStyleCtrl->SetSelection( 1 ); break;
default:
m_GridStyleCtrl->SetSelection( 0 ); break;
}
m_gridStyleRotation.SetUnits( DEGREES );
m_gridStyleRotation.SetValue( m_settings.m_HatchFillTypeOrientation*10 ); // IU is decidegree
// Gives a reasonable value to grid style parameters, if currently there are no defined
// parameters for grid pattern thickness and gap (if the value is 0)
// the grid pattern thickness default value is (arbitrary) m_ZoneMinThickness * 4
// or 1mm
// the grid pattern gap default value is (arbitrary) m_ZoneMinThickness * 6
// or 1.5 mm
int bestvalue = m_settings.m_HatchFillTypeThickness;
if( bestvalue <= 0 ) // No defined value for m_HatchFillTypeThickness
bestvalue = std::max( m_settings.m_ZoneMinThickness * 4, Millimeter2iu( 1.0 ) );
m_gridStyleThickness.SetValue( std::max( bestvalue, m_settings.m_ZoneMinThickness ) );
bestvalue = m_settings.m_HatchFillTypeGap;
if( bestvalue <= 0 ) // No defined value for m_HatchFillTypeGap
bestvalue = std::max( m_settings.m_ZoneMinThickness * 6, Millimeter2iu( 1.5 ) );
m_gridStyleGap.SetValue( std::max( bestvalue, m_settings.m_ZoneMinThickness ) );
m_spinCtrlSmoothLevel->SetValue( m_settings.m_HatchFillTypeSmoothingLevel );
m_spinCtrlSmoothValue->SetValue( m_settings.m_HatchFillTypeSmoothingValue );
// Enable/Disable some widgets
wxCommandEvent event;
OnStyleSelection( event );
return true;
}
void DIALOG_COPPER_ZONE::initDialog()
{
BOARD* board = m_Parent->GetBoard();
wxString msg;
if( m_settings.m_Zone_45_Only )
m_OrientEdgesOpt->SetSelection( 1 );
m_FillModeCtrl->SetSelection( m_settings.m_FillMode ? 1 : 0 );
AddUnitSymbol( *m_ClearanceValueTitle, g_UserUnit );
msg = ReturnStringFromValue( g_UserUnit, m_settings.m_ZoneClearance );
m_ZoneClearanceCtrl->SetValue( msg );
AddUnitSymbol( *m_MinThicknessValueTitle, g_UserUnit );
msg = ReturnStringFromValue( g_UserUnit, m_settings.m_ZoneMinThickness );
m_ZoneMinThicknessCtrl->SetValue( msg );
switch( m_settings.GetPadConnection() )
{
case THT_THERMAL: // Thermals only for THT pads
m_PadInZoneOpt->SetSelection( 2 );
break;
case PAD_NOT_IN_ZONE: // Pads are not covered
m_PadInZoneOpt->SetSelection( 3 );
break;
default:
case THERMAL_PAD: // Use thermal relief for pads
m_PadInZoneOpt->SetSelection( 1 );
break;
case PAD_IN_ZONE: // pads are covered by copper
m_PadInZoneOpt->SetSelection( 0 );
break;
}
// Antipad and spokes are significant only for thermals
if( m_settings.GetPadConnection() != THERMAL_PAD &&
m_settings.GetPadConnection() != THT_THERMAL )
{
m_AntipadSizeValue->Enable( false );
m_CopperWidthValue->Enable( false );
}
else
{
m_AntipadSizeValue->Enable( true );
m_CopperWidthValue->Enable( true );
}
m_PriorityLevelCtrl->SetValue( m_settings.m_ZonePriority );
AddUnitSymbol( *m_AntipadSizeText, g_UserUnit );
AddUnitSymbol( *m_CopperBridgeWidthText, g_UserUnit );
PutValueInLocalUnits( *m_AntipadSizeValue, m_settings.m_ThermalReliefGap );
PutValueInLocalUnits( *m_CopperWidthValue, m_settings.m_ThermalReliefCopperBridge );
m_cornerSmoothingChoice->SetSelection( m_settings.GetCornerSmoothingType() );
PutValueInLocalUnits( *m_cornerSmoothingCtrl, m_settings.GetCornerRadius() );
switch( m_settings.m_Zone_HatchingStyle )
{
case CPolyLine::NO_HATCH:
m_OutlineAppearanceCtrl->SetSelection( 0 );
break;
case CPolyLine::DIAGONAL_EDGE:
m_OutlineAppearanceCtrl->SetSelection( 1 );
break;
case CPolyLine::DIAGONAL_FULL:
m_OutlineAppearanceCtrl->SetSelection( 2 );
break;
}
m_ArcApproximationOpt->SetSelection(
m_settings.m_ArcToSegmentsCount == ARC_APPROX_SEGMENTS_COUNT_HIGHT_DEF ? 1 : 0 );
// Create one column in m_LayerSelectionCtrl
wxListItem column0;
column0.SetId( 0 );
m_LayerSelectionCtrl->InsertColumn( 0, column0 );
// Build copper layer list and append to layer widget
int layerCount = board->GetCopperLayerCount();
wxImageList* imageList = new wxImageList( LAYER_BITMAP_SIZE_X, LAYER_BITMAP_SIZE_Y );
m_LayerSelectionCtrl->AssignImageList( imageList, wxIMAGE_LIST_SMALL );
int ctrlWidth = 0; // Min width for m_LayerSelectionCtrl to show the layers names
for( LAYER_NUM ii = FIRST_LAYER; ii < layerCount; ++ii )
{
LAYER_NUM layerNumber = LAYER_N_BACK;
if( layerCount <= 1 || ii < layerCount - 1 )
layerNumber = ii;
else if( ii == layerCount - 1 )
layerNumber = LAYER_N_FRONT;
m_LayerId.insert( m_LayerId.begin(), layerNumber );
msg = board->GetLayerName( layerNumber ).Trim();
EDA_COLOR_T layerColor = board->GetLayerColor( layerNumber );
imageList->Add( makeLayerBitmap( layerColor ) );
int itemIndex = m_LayerSelectionCtrl->InsertItem( 0, msg, ii );
if( m_settings.m_CurrentZone_Layer == layerNumber )
m_LayerSelectionCtrl->Select( itemIndex );
wxSize tsize( GetTextSize( msg, m_LayerSelectionCtrl ) );
ctrlWidth = std::max( ctrlWidth, tsize.x );
}
// The most easy way to ensure the right size is to use wxLIST_AUTOSIZE
// unfortunately this option does not work well both on
// wxWidgets 2.8 ( column witdth too small), and
// wxWidgets 2.9 ( column witdth too large)
ctrlWidth += LAYER_BITMAP_SIZE_X + 16; // Add bitmap width + margin between bitmap and text
m_LayerSelectionCtrl->SetColumnWidth( 0, ctrlWidth );
ctrlWidth += 4; // add small margin between text and window borders
m_LayerSelectionCtrl->SetMinSize( wxSize(ctrlWidth, -1));
wxString netNameDoNotShowFilter = wxT( "Net-*" );
if( m_Config )
{
int opt = m_Config->Read( ZONE_NET_SORT_OPTION_KEY, 1l );
m_NetDisplayOption->SetSelection( opt );
m_Config->Read( ZONE_NET_FILTER_STRING_KEY, netNameDoNotShowFilter );
}
else
m_NetDisplayOption->SetSelection( 1 );
m_ShowNetNameFilter->SetValue( m_netNameShowFilter );
initListNetsParams();
// Build list of nets:
m_DoNotShowNetNameFilter->SetValue( netNameDoNotShowFilter );
buildAvailableListOfNets();
wxCommandEvent event;
OnCornerSmoothingModeChoice( event );
}
bool DIALOG_NON_COPPER_ZONES_EDITOR::TransferDataFromWindow()
{
m_settings.SetCornerSmoothingType( m_cornerSmoothingChoice->GetSelection() );
m_settings.SetCornerRadius( m_settings.GetCornerSmoothingType() == ZONE_SETTINGS::SMOOTHING_NONE
? 0 : m_cornerRadius.GetValue() );
if( !m_gridStyleRotation.Validate( -1800, 1800 ) )
return false;
m_settings.m_ZoneMinThickness = m_minWidth.GetValue();
switch( m_OutlineAppearanceCtrl->GetSelection() )
{
case 0: m_settings.m_Zone_HatchingStyle = ZONE_CONTAINER::NO_HATCH; break;
case 1: m_settings.m_Zone_HatchingStyle = ZONE_CONTAINER::DIAGONAL_EDGE; break;
case 2: m_settings.m_Zone_HatchingStyle = ZONE_CONTAINER::DIAGONAL_FULL; break;
}
if( m_GridStyleCtrl->GetSelection() > 0 )
m_settings.m_FillMode = ZFM_HATCH_PATTERN;
else
m_settings.m_FillMode = ZFM_POLYGONS;
if( m_settings.m_FillMode == ZFM_HATCH_PATTERN )
{
int minThickness = m_minWidth.GetValue();
if( !m_gridStyleThickness.Validate( minThickness, INT_MAX ) )
return false;
if( !m_gridStyleGap.Validate( minThickness, INT_MAX ) )
return false;
}
m_settings.m_HatchFillTypeOrientation = m_gridStyleRotation.GetValue()/10.0; // value is returned in deci-degree
m_settings.m_HatchFillTypeThickness = m_gridStyleThickness.GetValue();
m_settings.m_HatchFillTypeGap = m_gridStyleGap.GetValue();
m_settings.m_HatchFillTypeSmoothingLevel = m_spinCtrlSmoothLevel->GetValue();
m_settings.m_HatchFillTypeSmoothingValue = m_spinCtrlSmoothValue->GetValue();
wxConfigBase* cfg = Kiface().KifaceSettings();
wxASSERT( cfg );
cfg->Write( ZONE_NET_OUTLINES_STYLE_KEY, (long) m_settings.m_Zone_HatchingStyle );
m_settings.m_Zone_45_Only = m_ConstrainOpt->GetValue();
// Get the layer selection for this zone
int layer = -1;
for( int ii = 0; ii < m_layers->GetItemCount(); ++ii )
{
if( m_layers->GetToggleValue( (unsigned) ii, 0 ) )
{
layer = ii;
break;
}
}
if( layer < 0 )
{
DisplayError( this, _( "No layer selected." ) );
return false;
}
*m_ptr = m_settings;
return true;
}
