void
nsInlineFrame::ReflowInlineFrame(nsPresContext* aPresContext,
const ReflowInput& aReflowInput,
InlineReflowInput& irs,
nsIFrame* aFrame,
nsReflowStatus& aStatus)
{
nsLineLayout* lineLayout = aReflowInput.mLineLayout;
bool reflowingFirstLetter = lineLayout->GetFirstLetterStyleOK();
bool pushedFrame;
aStatus.Reset();
lineLayout->ReflowFrame(aFrame, aStatus, nullptr, pushedFrame);
if (aStatus.IsInlineBreakBefore()) {
if (aFrame != mFrames.FirstChild()) {
// Change break-before status into break-after since we have
// already placed at least one child frame. This preserves the
// break-type so that it can be propagated upward.
StyleClear oldBreakType = aStatus.BreakType();
aStatus.Reset();
aStatus.SetIncomplete();
aStatus.SetInlineLineBreakAfter(oldBreakType);
PushFrames(aPresContext, aFrame, irs.mPrevFrame, irs);
}
else {
// Preserve reflow status when breaking-before our first child
// and propagate it upward without modification.
}
return;
}
// Create a next-in-flow if needed.
if (!aStatus.IsFullyComplete()) {
CreateNextInFlow(aFrame);
}
if (aStatus.IsInlineBreakAfter()) {
nsIFrame* nextFrame = aFrame->GetNextSibling();
if (nextFrame) {
aStatus.SetIncomplete();
PushFrames(aPresContext, nextFrame, aFrame, irs);
}
else {
// We must return an incomplete status if there are more child
// frames remaining in a next-in-flow that follows this frame.
nsInlineFrame* nextInFlow = static_cast<nsInlineFrame*>(GetNextInFlow());
while (nextInFlow) {
if (nextInFlow->mFrames.NotEmpty()) {
aStatus.SetIncomplete();
break;
}
nextInFlow = static_cast<nsInlineFrame*>(nextInFlow->GetNextInFlow());
}
}
return;
}
if (!aStatus.IsFullyComplete() && !reflowingFirstLetter) {
nsIFrame* nextFrame = aFrame->GetNextSibling();
if (nextFrame) {
PushFrames(aPresContext, nextFrame, aFrame, irs);
}
}
}
void
nsRubyFrame::ReflowSegment(nsPresContext* aPresContext,
const ReflowInput& aReflowInput,
nsRubyBaseContainerFrame* aBaseContainer,
nsReflowStatus& aStatus)
{
WritingMode lineWM = aReflowInput.mLineLayout->GetWritingMode();
LogicalSize availSize(lineWM, aReflowInput.AvailableISize(),
aReflowInput.AvailableBSize());
WritingMode rubyWM = GetWritingMode();
NS_ASSERTION(!rubyWM.IsOrthogonalTo(lineWM),
"Ruby frame writing-mode shouldn't be orthogonal to its line");
AutoRubyTextContainerArray textContainers(aBaseContainer);
const uint32_t rtcCount = textContainers.Length();
ReflowOutput baseMetrics(aReflowInput);
bool pushedFrame;
aReflowInput.mLineLayout->ReflowFrame(aBaseContainer, aStatus,
&baseMetrics, pushedFrame);
if (aStatus.IsInlineBreakBefore()) {
if (aBaseContainer != mFrames.FirstChild()) {
// Some segments may have been reflowed before, hence it is not
// a break-before for the ruby container.
aStatus.Reset();
aStatus.SetInlineLineBreakAfter();
aStatus.SetIncomplete();
PushChildrenToOverflow(aBaseContainer, aBaseContainer->GetPrevSibling());
aReflowInput.mLineLayout->SetDirtyNextLine();
}
// This base container is not placed at all, we can skip all
// text containers paired with it.
return;
}
if (aStatus.IsIncomplete()) {
// It always promise that if the status is incomplete, there is a
// break occurs. Break before has been processed above. However,
// it is possible that break after happens with the frame reflow
// completed. It happens if there is a force break at the end.
MOZ_ASSERT(aStatus.IsInlineBreakAfter());
// Find the previous sibling which we will
// insert new continuations after.
nsIFrame* lastChild;
if (rtcCount > 0) {
lastChild = textContainers.LastElement();
} else {
lastChild = aBaseContainer;
}
// Create continuations for the base container
nsIFrame* newBaseContainer = CreateNextInFlow(aBaseContainer);
// newBaseContainer is null if there are existing next-in-flows.
// We only need to move and push if there were not.
if (newBaseContainer) {
// Move the new frame after all the text containers
mFrames.RemoveFrame(newBaseContainer);
mFrames.InsertFrame(nullptr, lastChild, newBaseContainer);
// Create continuations for text containers
nsIFrame* newLastChild = newBaseContainer;
for (uint32_t i = 0; i < rtcCount; i++) {
nsIFrame* newTextContainer = CreateNextInFlow(textContainers[i]);
MOZ_ASSERT(newTextContainer, "Next-in-flow of rtc should not exist "
"if the corresponding rbc does not");
mFrames.RemoveFrame(newTextContainer);
mFrames.InsertFrame(nullptr, newLastChild, newTextContainer);
newLastChild = newTextContainer;
}
}
if (lastChild != mFrames.LastChild()) {
// Always push the next frame after the last child in this segment.
// It is possible that we pulled it back before our next-in-flow
// drain our overflow.
PushChildrenToOverflow(lastChild->GetNextSibling(), lastChild);
aReflowInput.mLineLayout->SetDirtyNextLine();
}
} else {
// If the ruby base container is reflowed completely, the line
// layout will remove the next-in-flows of that frame. But the
// line layout is not aware of the ruby text containers, hence
// it is necessary to remove them here.
for (uint32_t i = 0; i < rtcCount; i++) {
nsIFrame* nextRTC = textContainers[i]->GetNextInFlow();
if (nextRTC) {
nextRTC->GetParent()->DeleteNextInFlowChild(nextRTC, true);
}
}
}
nscoord segmentISize = baseMetrics.ISize(lineWM);
const nsSize dummyContainerSize;
LogicalRect baseRect =
aBaseContainer->GetLogicalRect(lineWM, dummyContainerSize);
// We need to position our rtc frames on one side or the other of the
// base container's rect, using a coordinate space that's relative to
// the ruby frame. Right now, the base container's rect's block-axis
// position is relative to the block container frame containing the
// lines, so we use 0 instead. (i.e. we assume that the base container
// is adjacent to the ruby frame's block-start edge.)
// XXX We may need to add border/padding here. See bug 1055667.
baseRect.BStart(lineWM) = 0;
// The rect for offsets of text containers.
LogicalRect offsetRect = baseRect;
RubyBlockLeadings descLeadings = aBaseContainer->GetDescendantLeadings();
offsetRect.BStart(lineWM) -= descLeadings.mStart;
offsetRect.BSize(lineWM) += descLeadings.mStart + descLeadings.mEnd;
for (uint32_t i = 0; i < rtcCount; i++) {
nsRubyTextContainerFrame* textContainer = textContainers[i];
WritingMode rtcWM = textContainer->GetWritingMode();
nsReflowStatus textReflowStatus;
ReflowOutput textMetrics(aReflowInput);
ReflowInput textReflowInput(aPresContext, aReflowInput, textContainer,
availSize.ConvertTo(rtcWM, lineWM));
textContainer->Reflow(aPresContext, textMetrics,
textReflowInput, textReflowStatus);
// Ruby text containers always return complete reflow status even when
// they have continuations, because the breaking has already been
// handled when reflowing the base containers.
NS_ASSERTION(textReflowStatus.IsEmpty(),
"Ruby text container must not break itself inside");
// The metrics is initialized with reflow state of this ruby frame,
// hence the writing-mode is tied to rubyWM instead of rtcWM.
LogicalSize size = textMetrics.Size(rubyWM).ConvertTo(lineWM, rubyWM);
textContainer->SetSize(lineWM, size);
nscoord reservedISize = RubyUtils::GetReservedISize(textContainer);
segmentISize = std::max(segmentISize, size.ISize(lineWM) + reservedISize);
uint8_t rubyPosition = textContainer->StyleText()->mRubyPosition;
MOZ_ASSERT(rubyPosition == NS_STYLE_RUBY_POSITION_OVER ||
rubyPosition == NS_STYLE_RUBY_POSITION_UNDER);
Maybe<LogicalSide> side;
if (rubyPosition == NS_STYLE_RUBY_POSITION_OVER) {
side.emplace(lineWM.LogicalSideForLineRelativeDir(eLineRelativeDirOver));
} else if (rubyPosition == NS_STYLE_RUBY_POSITION_UNDER) {
side.emplace(lineWM.LogicalSideForLineRelativeDir(eLineRelativeDirUnder));
} else {
// XXX inter-character support in bug 1055672
MOZ_ASSERT_UNREACHABLE("Unsupported ruby-position");
}
LogicalPoint position(lineWM);
if (side.isSome()) {
if (nsLayoutUtils::IsInterCharacterRubyEnabled() &&
rtcWM.IsVerticalRL() &&
lineWM.GetInlineDir() == WritingMode::eInlineLTR) {
// Inter-character ruby annotations are only supported for vertical-rl
// in ltr horizontal writing. Fall back to non-inter-character behavior
// otherwise.
LogicalPoint offset(lineWM, offsetRect.ISize(lineWM),
offsetRect.BSize(lineWM) > size.BSize(lineWM) ?
(offsetRect.BSize(lineWM) - size.BSize(lineWM)) / 2 : 0);
position = offsetRect.Origin(lineWM) + offset;
aReflowInput.mLineLayout->AdvanceICoord(size.ISize(lineWM));
} else if (side.value() == eLogicalSideBStart) {
offsetRect.BStart(lineWM) -= size.BSize(lineWM);
offsetRect.BSize(lineWM) += size.BSize(lineWM);
position = offsetRect.Origin(lineWM);
} else if (side.value() == eLogicalSideBEnd) {
position = offsetRect.Origin(lineWM) +
LogicalPoint(lineWM, 0, offsetRect.BSize(lineWM));
offsetRect.BSize(lineWM) += size.BSize(lineWM);
} else {
MOZ_ASSERT_UNREACHABLE("???");
}
}
// Using a dummy container-size here, so child positioning may not be
// correct. We will fix it in nsLineLayout after the whole line is
// reflowed.
FinishReflowChild(textContainer, aPresContext, textMetrics,
&textReflowInput, lineWM, position, dummyContainerSize, 0);
}
MOZ_ASSERT(baseRect.ISize(lineWM) == offsetRect.ISize(lineWM),
"Annotations should only be placed on the block directions");
nscoord deltaISize = segmentISize - baseMetrics.ISize(lineWM);
if (deltaISize <= 0) {
RubyUtils::ClearReservedISize(aBaseContainer);
} else {
RubyUtils::SetReservedISize(aBaseContainer, deltaISize);
aReflowInput.mLineLayout->AdvanceICoord(deltaISize);
}
// Set block leadings of the base container
nscoord startLeading = baseRect.BStart(lineWM) - offsetRect.BStart(lineWM);
nscoord endLeading = offsetRect.BEnd(lineWM) - baseRect.BEnd(lineWM);
// XXX When bug 765861 gets fixed, this warning should be upgraded.
NS_WARNING_ASSERTION(startLeading >= 0 && endLeading >= 0,
"Leadings should be non-negative (because adding "
"ruby annotation can only increase the size)");
mLeadings.Update(startLeading, endLeading);
}