void kwxAngularMeter::DrawSectors(wxDC &dc) { double starc,endarc; int secount,dx,dy; int w,h ; double val; GetClientSize(&w,&h); wxRect innerRect; innerRect.x = w*2/35; innerRect.y = h*2/35; innerRect.width = w-2*innerRect.x; innerRect.height = h-2*innerRect.y; //Arch -> sectors //dc.SetPen(*wxThePenList->FindOrCreatePen(*wxBLACK, 1, wxSOLID)); dc.SetPen(*wxThePenList->FindOrCreatePen(*wxBLACK, 1, wxTRANSPARENT)); starc = m_nAngleStart; endarc = starc + ((m_nAngleEnd - m_nAngleStart) / (double)m_nSec); //dc.SetBrush(*wxTheBrushList->FindOrCreateBrush(*wxRED,wxSOLID)); for(secount=0;secount<m_nSec;secount++) { dc.SetPen(*wxThePenList->FindOrCreatePen(*wxBLACK, 1, wxTRANSPARENT)); dc.SetBrush(*wxTheBrushList->FindOrCreateBrush(m_aSectorColor[secount],wxSOLID)); dc.DrawEllipticArc(0,0,w,h,180 - endarc,180 - starc); dc.SetBrush(*wxTheBrushList->FindOrCreateBrush(m_cBackColour,wxSOLID)); dc.DrawEllipticArc(innerRect.x,innerRect.y,innerRect.width,innerRect.height,180 - endarc,180 - starc); starc = endarc; endarc += ((m_nAngleEnd - m_nAngleStart) / (double)m_nSec); } val = (m_nAngleStart * m_dPI) / 180.0; dx = cos(val) * h / 2.0; dy = sin(val) * h / 2.0; dc.DrawLine(w / 2, h / 2, (w / 2) - dx, (h / 2) - dy); //left line val = (m_nAngleEnd * m_dPI) / 180.0; dx = cos(val) * h / 2.0; dy = sin(val) * h / 2.0; dc.DrawLine(w / 2, h / 2, (w / 2) - dx, (h / 2) - dy); //right line }
void AngularMeter::DrawSectors(wxDC &dc) { int w,h ; GetClientSize(&w,&h); int hOffset = 0; int wOffset = 0; if (w > h) wOffset = (w - h) / 2; if (h > w) hOffset = (h - w) / 2; //square out the size if (w > h) w=h; if (h > w) h=w; //Draw the dial dc.SetPen(*wxThePenList->FindOrCreatePen(_dialColor,1 , wxSOLID)); dc.SetBrush(*wxTheBrushList->FindOrCreateBrush(_dialColor,wxSOLID)); dc.DrawEllipticArc(0 + wOffset, 0 + hOffset, w, h, 0, 360); dc.SetBrush(*wxTheBrushList->FindOrCreateBrush(*wxBLACK, wxTRANSPARENT)); dc.SetPen(*wxThePenList->FindOrCreatePen(wxColor(0x25,0x25,0x25), 2, wxSOLID)); dc.DrawEllipticArc(0 + wOffset, 0 + hOffset, w, h, 45, -135); dc.SetPen(*wxThePenList->FindOrCreatePen(wxColor(0x55,0x55,0x55), 2, wxSOLID)); dc.DrawEllipticArc(0 + wOffset, 0 + hOffset, w, h, -135, 45); //Done drawing dial //Draw warning range if (_realWarningValue > 0){ dc.SetPen(*wxThePenList->FindOrCreatePen(_warningColor,2, wxSOLID)); dc.SetBrush(*wxTheBrushList->FindOrCreateBrush(_warningColor, wxFDIAGONAL_HATCH)); double warningEnd = _angleEnd - _scaledWarningValue; double warningStart = (_realAlertValue > 0 ? _angleEnd - _scaledAlertValue : _angleStart); dc.DrawEllipticArc(0 + wOffset + 1, 0 + hOffset + 1, w - 2, h - 2, warningStart, warningEnd); } if (_realAlertValue > 0){ dc.SetPen(*wxThePenList->FindOrCreatePen(_alertColor, 3, wxSOLID)); dc.SetBrush(*wxTheBrushList->FindOrCreateBrush(_alertColor, wxBDIAGONAL_HATCH)); dc.DrawEllipticArc(0 + wOffset + 1, 0 + hOffset + 1, w - 2, h - 2, _angleStart, _angleEnd - _scaledAlertValue); } }
void kwxAngularMeter::DrawSectors(wxDC &dc) { double starc,endarc; int secount,dx,dy; int w,h ; double val; GetClientSize(&w,&h); //arco -> settori dc.SetPen(*wxThePenList->FindOrCreatePen(*wxBLACK, 1, wxSOLID)); starc = m_nAngleStart; endarc = starc + ((m_nAngleEnd - m_nAngleStart) / (double)m_nSec); //dc.SetBrush(*wxTheBrushList->FindOrCreateBrush(*wxRED,wxSOLID)); for(secount=0;secount<m_nSec;secount++) { dc.SetBrush(*wxTheBrushList->FindOrCreateBrush(m_aSectorColor[secount],wxSOLID)); dc.DrawEllipticArc(0,0,w,h,180 - endarc,180 - starc); //dc.DrawEllipticArc(0,0,w,h,0,180); starc = endarc; endarc += ((m_nAngleEnd - m_nAngleStart) / (double)m_nSec); } val = (m_nAngleStart * m_dPI) / 180.0; dx = static_cast<int>(cos(val) * h / 2.0); dy = static_cast<int>(sin(val) * h / 2.0); dc.DrawLine(w / 2, h / 2, (w / 2) - dx, (h / 2) - dy); //linea sinistra val = (m_nAngleEnd * m_dPI) / 180.0; dx = static_cast<int>(cos(val) * h / 2.0); dy = static_cast<int>(sin(val) * h / 2.0); dc.DrawLine(w / 2, h / 2, (w / 2) - dx, (h / 2) - dy); //linea destra }
void MyApp::Draw(wxDC&dc) { // This routine just draws a bunch of random stuff on the screen so that we // can check that different types of object are being drawn consistently // between the screen image, the print preview image (at various zoom // levels), and the printed page. dc.SetBackground(*wxWHITE_BRUSH); // dc.Clear(); dc.SetFont(m_testFont); // dc.SetBackgroundMode(wxTRANSPARENT); dc.SetPen(*wxBLACK_PEN); dc.SetBrush(*wxLIGHT_GREY_BRUSH); dc.DrawRectangle(0, 0, 230, 350); dc.DrawLine(0, 0, 229, 349); dc.DrawLine(229, 0, 0, 349); dc.SetBrush(*wxTRANSPARENT_BRUSH); dc.SetBrush(*wxCYAN_BRUSH); dc.SetPen(*wxRED_PEN); dc.DrawRoundedRectangle(0, 20, 200, 80, 20); dc.DrawText( wxT("Rectangle 200 by 80"), 40, 40); dc.SetPen( wxPen(*wxBLACK, 0, wxPENSTYLE_DOT_DASH) ); dc.DrawEllipse(50, 140, 100, 50); dc.SetPen(*wxRED_PEN); dc.DrawText( wxT("Test message: this is in 10 point text"), 10, 180); #if wxUSE_UNICODE const char *test = "Hebrew שלום -- Japanese (日本語)"; wxString tmp = wxConvUTF8.cMB2WC( test ); dc.DrawText( tmp, 10, 200 ); #endif wxPoint points[5]; points[0].x = 0; points[0].y = 0; points[1].x = 20; points[1].y = 0; points[2].x = 20; points[2].y = 20; points[3].x = 10; points[3].y = 20; points[4].x = 10; points[4].y = -20; dc.DrawPolygon( 5, points, 20, 250, wxODDEVEN_RULE ); dc.DrawPolygon( 5, points, 50, 250, wxWINDING_RULE ); dc.DrawEllipticArc( 80, 250, 60, 30, 0.0, 270.0 ); points[0].x = 150; points[0].y = 250; points[1].x = 180; points[1].y = 250; points[2].x = 180; points[2].y = 220; points[3].x = 200; points[3].y = 220; dc.DrawSpline( 4, points ); dc.DrawArc( 20,10, 10,10, 25,40 ); wxString str; int i = 0; str.Printf( wxT("---- Text at angle %d ----"), i ); dc.DrawRotatedText( str, 100, 300, i ); i = m_angle; str.Printf( wxT("---- Text at angle %d ----"), i ); dc.DrawRotatedText( str, 100, 300, i ); wxIcon my_icon = wxICON(sample); dc.DrawIcon( my_icon, 100, 100); if (m_bitmap.IsOk()) dc.DrawBitmap( m_bitmap, 10, 10 ); #if wxUSE_GRAPHICS_CONTEXT wxGraphicsContext *gc = NULL; wxPrinterDC *printer_dc = wxDynamicCast( &dc, wxPrinterDC ); if (printer_dc) gc = wxGraphicsContext::Create( *printer_dc ); wxWindowDC *window_dc = wxDynamicCast( &dc, wxWindowDC ); if (window_dc) gc = wxGraphicsContext::Create( *window_dc ); #ifdef __WXMSW__ wxEnhMetaFileDC *emf_dc = wxDynamicCast( &dc, wxEnhMetaFileDC ); if (emf_dc) gc = wxGraphicsContext::Create( *emf_dc ); #endif if (gc) { // make a path that contains a circle and some lines, centered at 100,100 gc->SetPen( *wxRED_PEN ); wxGraphicsPath path = gc->CreatePath(); path.AddCircle( 50.0, 50.0, 50.0 ); path.MoveToPoint(0.0, 50.0); path.AddLineToPoint(100.0, 50.0); path.MoveToPoint(50.0, 0.0); path.AddLineToPoint(50.0, 100.0 ); path.CloseSubpath(); path.AddRectangle(25.0, 25.0, 50.0, 50.0); gc->StrokePath(path); // draw some text wxString text("Text by wxGraphicsContext"); gc->SetFont( m_testFont, *wxBLACK ); gc->DrawText(text, 25.0, 60.0); // draw rectangle around the text double w, h, d, el; gc->GetTextExtent(text, &w, &h, &d, &el); gc->SetPen( *wxBLACK_PEN ); gc->DrawRectangle(25.0, 60.0, w, h); delete gc; } #endif }
// Define the repainting behaviour void MyCanvas::OnDraw(wxDC& dc) { // vars to use ... #if wxUSE_STATUSBAR wxString s; #endif // wxUSE_STATUSBAR wxPen wP; wxBrush wB; wxPoint points[6]; wxColour wC; wxFont wF; dc.SetFont(*wxSWISS_FONT); dc.SetPen(*wxGREEN_PEN); switch (m_index) { default: case 0: // draw lines to make a cross dc.DrawLine(0, 0, 200, 200); dc.DrawLine(200, 0, 0, 200); // draw point colored line and spline wP = *wxCYAN_PEN; wP.SetWidth(3); dc.SetPen(wP); dc.DrawPoint (25,15); dc.DrawLine(50, 30, 200, 30); dc.DrawSpline(50, 200, 50, 100, 200, 10); #if wxUSE_STATUSBAR s = wxT("Green Cross, Cyan Line and spline"); #endif // wxUSE_STATUSBAR break; case 1: // draw standard shapes dc.SetBrush(*wxCYAN_BRUSH); dc.SetPen(*wxRED_PEN); dc.DrawRectangle(10, 10, 100, 70); wB = wxBrush (wxT("DARK ORCHID"), wxBRUSHSTYLE_TRANSPARENT); dc.SetBrush (wB); dc.DrawRoundedRectangle(50, 50, 100, 70, 20); dc.SetBrush (wxBrush(wxT("GOLDENROD")) ); dc.DrawEllipse(100, 100, 100, 50); points[0].x = 100; points[0].y = 200; points[1].x = 70; points[1].y = 260; points[2].x = 160; points[2].y = 230; points[3].x = 40; points[3].y = 230; points[4].x = 130; points[4].y = 260; points[5].x = 100; points[5].y = 200; dc.DrawPolygon(5, points); dc.DrawLines (6, points, 160); #if wxUSE_STATUSBAR s = wxT("Blue rectangle, red edge, clear rounded rectangle, gold ellipse, gold and clear stars"); #endif // wxUSE_STATUSBAR break; case 2: // draw text in Arial or similar font dc.DrawLine(50,25,50,35); dc.DrawLine(45,30,55,30); dc.DrawText(wxT("This is a Swiss-style string"), 50, 30); wC = dc.GetTextForeground(); dc.SetTextForeground (wxT("FIREBRICK")); // no effect in msw ?? dc.SetTextBackground (wxT("WHEAT")); dc.DrawText(wxT("This is a Red string"), 50, 200); dc.DrawRotatedText(wxT("This is a 45 deg string"), 50, 200, 45); dc.DrawRotatedText(wxT("This is a 90 deg string"), 50, 200, 90); wF = wxFont ( 18, wxROMAN, wxITALIC, wxBOLD, false, wxT("Times New Roman")); dc.SetFont(wF); dc.SetTextForeground (wC); dc.DrawText(wxT("This is a Times-style string"), 50, 60); #if wxUSE_STATUSBAR s = wxT("Swiss, Times text; red text, rotated and colored orange"); #endif // wxUSE_STATUSBAR break; case 3 : // four arcs start and end points, center dc.SetBrush(*wxGREEN_BRUSH); dc.DrawArc ( 200,300, 370,230, 300,300 ); dc.SetBrush(*wxBLUE_BRUSH); dc.DrawArc ( 270-50, 270-86, 270-86, 270-50, 270,270 ); dc.SetDeviceOrigin(-10,-10); dc.DrawArc ( 270-50, 270-86, 270-86, 270-50, 270,270 ); dc.SetDeviceOrigin(0,0); wP.SetColour (wxT("CADET BLUE")); dc.SetPen(wP); dc.DrawArc ( 75,125, 110, 40, 75, 75 ); wP.SetColour (wxT("SALMON")); dc.SetPen(wP); dc.SetBrush(*wxRED_BRUSH); //top left corner, width and height, start and end angle // 315 same center and x-radius as last pie-arc, half Y radius dc.DrawEllipticArc(25,50,100,50,180.0,45.0); wP = *wxCYAN_PEN; wP.SetWidth(3); dc.SetPen(wP); //wxTRANSPARENT)); dc.SetBrush (wxBrush (wxT("SALMON"))); dc.DrawEllipticArc(300, 0,200,100, 0.0,145.0); //same end point dc.DrawEllipticArc(300, 50,200,100,90.0,145.0); dc.DrawEllipticArc(300,100,200,100,90.0,345.0); #if wxUSE_STATUSBAR s = wxT("This is an arc test page"); #endif // wxUSE_STATUSBAR break; case 4: dc.DrawCheckMark ( 30,30,25,25); dc.SetBrush (wxBrush (wxT("SALMON"),wxBRUSHSTYLE_TRANSPARENT)); dc.DrawCheckMark ( 80,50,75,75); dc.DrawRectangle ( 80,50,75,75); #if wxUSE_STATUSBAR s = wxT("Two check marks"); #endif // wxUSE_STATUSBAR break; case 5: wF = wxFont ( 18, wxROMAN, wxITALIC, wxBOLD, false, wxT("Times New Roman")); dc.SetFont(wF); dc.DrawLine(0, 0, 200, 200); dc.DrawLine(200, 0, 0, 200); dc.DrawText(wxT("This is an 18pt string"), 50, 60); // rescale and draw in blue wP = *wxCYAN_PEN; dc.SetPen(wP); dc.SetUserScale (2.0,0.5); dc.SetDeviceOrigin(200,0); dc.DrawLine(0, 0, 200, 200); dc.DrawLine(200, 0, 0, 200); dc.DrawText(wxT("This is an 18pt string 2 x 0.5 UserScaled"), 50, 60); dc.SetUserScale (2.0,2.0); dc.SetDeviceOrigin(200,200); dc.DrawText(wxT("This is an 18pt string 2 x 2 UserScaled"), 50, 60); wP = *wxRED_PEN; dc.SetPen(wP); dc.SetUserScale (1.0,1.0); dc.SetDeviceOrigin(0,10); dc.SetMapMode (wxMM_METRIC); //svg ignores this dc.DrawLine(0, 0, 200, 200); dc.DrawLine(200, 0, 0, 200); dc.DrawText(wxT("This is an 18pt string in MapMode"), 50, 60); #if wxUSE_STATUSBAR s = wxT("Scaling test page"); #endif // wxUSE_STATUSBAR break; case 6: dc.DrawIcon( wxICON(sample), 10, 10 ); dc.DrawBitmap ( wxBitmap(svgbitmap_xpm), 50,15); #if wxUSE_STATUSBAR s = wxT("Icon and Bitmap "); #endif // wxUSE_STATUSBAR break; case 7: dc.SetTextForeground(wxT("RED")); dc.DrawText(wxT("Red = Clipping Off"), 30, 5); dc.SetTextForeground(wxT("GREEN")); dc.DrawText(wxT("Green = Clipping On"), 30, 25); dc.SetTextForeground(wxT("BLACK")); dc.SetPen(*wxRED_PEN); dc.SetBrush (wxBrush (wxT("SALMON"),wxBRUSHSTYLE_TRANSPARENT)); dc.DrawCheckMark ( 80,50,75,75); dc.DrawRectangle ( 80,50,75,75); dc.SetPen(*wxGREEN_PEN); // Clipped checkmarks dc.DrawRectangle(180,50,75,75); dc.SetClippingRegion(180,50,75,75); // x,y,width,height version dc.DrawCheckMark ( 180,50,75,75); dc.DestroyClippingRegion(); dc.DrawRectangle(wxRect(80,150,75,75)); dc.SetClippingRegion(wxPoint(80,150),wxSize(75,75)); // pt,size version dc.DrawCheckMark ( 80,150,75,75); dc.DestroyClippingRegion(); dc.DrawRectangle(wxRect(180,150,75,75)); dc.SetClippingRegion(wxRect(180,150,75,75)); // rect version dc.DrawCheckMark ( 180,150,75,75); dc.DestroyClippingRegion(); dc.DrawRectangle(wxRect( 80,250,50,65)); dc.DrawRectangle(wxRect(105,260,50,65)); dc.SetClippingRegion(wxRect( 80,250,50,65)); // second call to SetClippingRegion dc.SetClippingRegion(wxRect(105,260,50,65)); // forms intersection with previous dc.DrawCheckMark(80,250,75,75); dc.DestroyClippingRegion(); // only one call to destroy (there's no stack) /* ** Clipping by wxRegion not implemented for SVG. Should be ** possible, but need to access points that define the wxRegion ** from inside DoSetDeviceClippingRegion() and wxRegion does not ** implement anything like getPoints(). points[0].x = 180; points[0].y = 250; points[1].x = 255; points[1].y = 250; points[2].x = 180; points[2].y = 325; points[3].x = 255; points[3].y = 325; points[4].x = 180; points[4].y = 250; dc.DrawLines (5, points); wxRegion reg = wxRegion(5,points); dc.SetClippingRegion(reg); dc.DrawCheckMark ( 180,250,75,75); dc.DestroyClippingRegion(); */ #if wxUSE_STATUSBAR s = wxT("Clipping region"); #endif // wxUSE_STATUSBAR break; case 8: wxString txtStr; wxCoord txtX, txtY, txtW, txtH, txtDescent, txtEL; wxCoord txtPad = 0; wP = *wxRED_PEN; dc.SetPen(wP); //dc.SetBackgroundMode(wxBRUSHSTYLE_SOLID); //dc.SetTextBackground(*wxBLUE); // Horizontal text txtStr = wxT("Horizontal string"); dc.GetTextExtent(txtStr, &txtW, &txtH, &txtDescent, &txtEL); txtX = 50; txtY = 300; dc.DrawRectangle(txtX, txtY, txtW + 2*txtPad, txtH + 2*txtPad); dc.DrawText(txtStr, txtX + txtPad, txtY + txtPad); // Vertical text txtStr = wxT("Vertical string"); dc.GetTextExtent(txtStr, &txtW, &txtH, &txtDescent, &txtEL); txtX = 50; txtY = 250; dc.DrawRectangle(txtX, txtY - (txtW + 2*txtPad), txtH + 2*txtPad, txtW + 2*txtPad); dc.DrawRotatedText(txtStr, txtX + txtPad, txtY - txtPad, 90); // 45 degree text txtStr = wxT("45 deg string"); dc.GetTextExtent(txtStr, &txtW, &txtH, &txtDescent, &txtEL); double lenW = (double)(txtW + 2*txtPad) / sqrt(2.0); double lenH = (double)(txtH + 2*txtPad) / sqrt(2.0); double padding = (double)txtPad / sqrt(2.0); txtX = 150; txtY = 200; dc.DrawLine(txtX - padding, txtY, txtX + lenW, txtY - lenW); // top dc.DrawLine(txtX + lenW, txtY - lenW, txtX - padding + lenH + lenW, txtY + (lenH - lenW)); dc.DrawLine(txtX - padding, txtY, txtX - padding + lenH, txtY + lenH); dc.DrawLine(txtX - padding + lenH, txtY + lenH, txtX - padding + lenH + lenW, txtY + (lenH - lenW)); // bottom dc.DrawRotatedText(txtStr, txtX, txtY, 45); #if wxUSE_STATUSBAR s = wxT("Text position test page"); #endif // wxUSE_STATUSBAR break; } #if wxUSE_STATUSBAR m_child->SetStatusText(s); #endif // wxUSE_STATUSBAR }
void MyFrame::Draw(wxDC& dc) { // This routine just draws a bunch of random stuff on the screen so that we // can check that different types of object are being drawn consistently // between the screen image, the print preview image (at various zoom // levels), and the printed page. dc.SetBackground(*wxWHITE_BRUSH); dc.Clear(); dc.SetFont(wxGetApp().m_testFont); dc.SetBackgroundMode(wxTRANSPARENT); dc.SetPen(*wxBLACK_PEN); dc.SetBrush(*wxLIGHT_GREY_BRUSH); // dc.SetBackground(*wxWHITE_BRUSH); dc.DrawRectangle(0, 0, 230, 350); dc.DrawLine(0, 0, 229, 349); dc.DrawLine(229, 0, 0, 349); dc.SetBrush(*wxTRANSPARENT_BRUSH); dc.SetBrush(*wxCYAN_BRUSH); dc.SetPen(*wxRED_PEN); dc.DrawRoundedRectangle(0, 20, 200, 80, 20); dc.DrawText( wxT("Rectangle 200 by 80"), 40, 40); dc.SetPen( wxPen(*wxBLACK,0,wxDOT_DASH) ); dc.DrawEllipse(50, 140, 100, 50); dc.SetPen(*wxRED_PEN); dc.DrawText( wxT("Test message: this is in 10 point text"), 10, 180); #if wxUSE_UNICODE //char *test = "Hebrew שלום -- Japanese (日本語)"; //wxString tmp = wxConvUTF8.cMB2WC( test ); //dc.DrawText( tmp, 10, 200 ); #endif wxPoint points[5]; points[0].x = 0; points[0].y = 0; points[1].x = 20; points[1].y = 0; points[2].x = 20; points[2].y = 20; points[3].x = 10; points[3].y = 20; points[4].x = 10; points[4].y = -20; dc.DrawPolygon( 5, points, 20, 250, wxODDEVEN_RULE ); dc.DrawPolygon( 5, points, 50, 250, wxWINDING_RULE ); dc.DrawEllipticArc( 80, 250, 60, 30, 0.0, 270.0 ); points[0].x = 150; points[0].y = 250; points[1].x = 180; points[1].y = 250; points[2].x = 180; points[2].y = 220; points[3].x = 200; points[3].y = 220; dc.DrawSpline( 4, points ); dc.DrawArc( 20,10, 10,10, 25,40 ); wxString str; int i = 0; str.Printf( wxT("---- Text at angle %d ----"), i ); dc.DrawRotatedText( str, 100, 300, i ); i = m_angle; str.Printf( wxT("---- Text at angle %d ----"), i ); dc.DrawRotatedText( str, 100, 300, i ); wxIcon my_icon = wxICON(mondrian) ; dc.DrawIcon( my_icon, 100, 100); if (m_bitmap.Ok()) { dc.DrawBitmap(m_bitmap, 10, 25); } if (m_imgUp.Ok()) { dc.DrawBitmap(m_imgUp, 300, 200); dc.DrawBitmap(m_imgUp, 300, 250, true); } }
// Define the repainting behaviour void MyCanvas::OnDraw(wxDC& dc) { // vars to use ... #if wxUSE_STATUSBAR wxString s ; #endif // wxUSE_STATUSBAR wxPen wP ; wxBrush wB ; wxPoint points[6]; wxColour wC; wxFont wF ; dc.SetFont(*wxSWISS_FONT); dc.SetPen(*wxGREEN_PEN); switch (m_index) { default: case 0: // draw lines to make a cross dc.DrawLine(0, 0, 200, 200); dc.DrawLine(200, 0, 0, 200); // draw point colored line and spline wP = *wxCYAN_PEN ; wP.SetWidth(3); dc.SetPen(wP); dc.DrawPoint (25,15) ; dc.DrawLine(50, 30, 200, 30); dc.DrawSpline(50, 200, 50, 100, 200, 10); #if wxUSE_STATUSBAR s = wxT("Green Cross, Cyan Line and spline"); #endif // wxUSE_STATUSBAR break ; case 1: // draw standard shapes dc.SetBrush(*wxCYAN_BRUSH); dc.SetPen(*wxRED_PEN); dc.DrawRectangle(10, 10, 100, 70); wB = wxBrush (_T("DARK ORCHID"), wxTRANSPARENT); dc.SetBrush (wB); dc.DrawRoundedRectangle(50, 50, 100, 70, 20); dc.SetBrush (wxBrush(_T("GOLDENROD"), wxSOLID) ); dc.DrawEllipse(100, 100, 100, 50); points[0].x = 100; points[0].y = 200; points[1].x = 70; points[1].y = 260; points[2].x = 160; points[2].y = 230; points[3].x = 40; points[3].y = 230; points[4].x = 130; points[4].y = 260; points[5].x = 100; points[5].y = 200; dc.DrawPolygon(5, points); dc.DrawLines (6, points, 160); #if wxUSE_STATUSBAR s = wxT("Blue rectangle, red edge, clear rounded rectangle, gold ellipse, gold and clear stars"); #endif // wxUSE_STATUSBAR break ; case 2: // draw text in Arial or similar font dc.DrawLine(50,25,50,35); dc.DrawLine(45,30,55,30); dc.DrawText(wxT("This is a Swiss-style string"), 50, 30); wC = dc.GetTextForeground() ; dc.SetTextForeground (_T("FIREBRICK")); // no effect in msw ?? dc.SetTextBackground (_T("WHEAT")); dc.DrawText(wxT("This is a Red string"), 50, 200); dc.DrawRotatedText(wxT("This is a 45 deg string"), 50, 200, 45); dc.DrawRotatedText(wxT("This is a 90 deg string"), 50, 200, 90); wF = wxFont ( 18, wxROMAN, wxITALIC, wxBOLD, false, wxT("Times New Roman")); dc.SetFont(wF); dc.SetTextForeground (wC) ; dc.DrawText(wxT("This is a Times-style string"), 50, 60); #if wxUSE_STATUSBAR s = wxT("Swiss, Times text; red text, rotated and colored orange"); #endif // wxUSE_STATUSBAR break ; case 3 : // four arcs start and end points, center dc.SetBrush(*wxGREEN_BRUSH); dc.DrawArc ( 200,300, 370,230, 300,300 ); dc.SetBrush(*wxBLUE_BRUSH); dc.DrawArc ( 270-50, 270-86, 270-86, 270-50, 270,270 ); dc.SetDeviceOrigin(-10,-10); dc.DrawArc ( 270-50, 270-86, 270-86, 270-50, 270,270 ); dc.SetDeviceOrigin(0,0); wP.SetColour (_T("CADET BLUE")); dc.SetPen(wP); dc.DrawArc ( 75,125, 110, 40, 75, 75 ); wP.SetColour (_T("SALMON")); dc.SetPen(wP); dc.SetBrush(*wxRED_BRUSH); //top left corner, width and height, start and end angle // 315 same center and x-radius as last pie-arc, half Y radius dc.DrawEllipticArc(25,50,100,50,180.0,45.0) ; wP = *wxCYAN_PEN ; wP.SetWidth(3); dc.SetPen(wP); //wxTRANSPARENT)); dc.SetBrush (wxBrush (_T("SALMON"),wxSOLID)) ; dc.DrawEllipticArc(300, 0,200,100, 0.0,145.0) ; //same end point dc.DrawEllipticArc(300, 50,200,100,90.0,145.0) ; dc.DrawEllipticArc(300,100,200,100,90.0,345.0) ; #if wxUSE_STATUSBAR s = wxT("This is an arc test page"); #endif // wxUSE_STATUSBAR break ; case 4: dc.DrawCheckMark ( 30,30,25,25); dc.SetBrush (wxBrush (_T("SALMON"),wxTRANSPARENT)); dc.DrawCheckMark ( 80,50,75,75); dc.DrawRectangle ( 80,50,75,75); #if wxUSE_STATUSBAR s = wxT("Two check marks"); #endif // wxUSE_STATUSBAR break ; case 5: wF = wxFont ( 18, wxROMAN, wxITALIC, wxBOLD, false, wxT("Times New Roman")); dc.SetFont(wF); dc.DrawLine(0, 0, 200, 200); dc.DrawLine(200, 0, 0, 200); dc.DrawText(wxT("This is an 18pt string"), 50, 60); // rescale and draw in blue wP = *wxCYAN_PEN ; dc.SetPen(wP); dc.SetUserScale (2.0,0.5); dc.SetDeviceOrigin(200,0); dc.DrawLine(0, 0, 200, 200); dc.DrawLine(200, 0, 0, 200); dc.DrawText(wxT("This is an 18pt string 2 x 0.5 UserScaled"), 50, 60); dc.SetUserScale (2.0,2.0); dc.SetDeviceOrigin(200,200); dc.DrawText(wxT("This is an 18pt string 2 x 2 UserScaled"), 50, 60); wP = *wxRED_PEN ; dc.SetPen(wP); dc.SetUserScale (1.0,1.0); dc.SetDeviceOrigin(0,10); dc.SetMapMode (wxMM_METRIC) ; //svg ignores this dc.DrawLine(0, 0, 200, 200); dc.DrawLine(200, 0, 0, 200); dc.DrawText(wxT("This is an 18pt string in MapMode"), 50, 60); #if wxUSE_STATUSBAR s = wxT("Scaling test page"); #endif // wxUSE_STATUSBAR break ; case 6: dc.DrawIcon( wxIcon(mondrian_xpm), 10, 10 ); dc.DrawBitmap ( wxBitmap(svgbitmap_xpm), 50,15); #if wxUSE_STATUSBAR s = wxT("Icon and Bitmap "); #endif // wxUSE_STATUSBAR break ; } #if wxUSE_STATUSBAR m_child->SetStatusText(s); #endif // wxUSE_STATUSBAR }