void
Map::removeElevationLayer( ElevationLayer* layer )
{
osgEarth::Registry::instance()->clearBlacklist();
unsigned int index = -1;
osg::ref_ptr<ElevationLayer> layerToRemove = layer;
Revision newRevision;
if ( layerToRemove.get() )
{
Threading::ScopedWriteLock lock( _mapDataMutex );
index = 0;
for( ElevationLayerVector::iterator i = _elevationLayers.begin(); i != _elevationLayers.end(); i++, index++ )
{
if ( i->get() == layerToRemove.get() )
{
_elevationLayers.erase( i );
newRevision = ++_dataModelRevision;
break;
}
}
}
// a separate block b/c we don't need the mutex
if ( newRevision >= 0 ) //layerToRemove.get() )
{
for( MapCallbackList::iterator i = _mapCallbacks.begin(); i != _mapCallbacks.end(); i++ )
{
i->get()->onMapModelChanged( MapModelChange(
MapModelChange::REMOVE_ELEVATION_LAYER, newRevision, layerToRemove.get(), index) );
}
}
}
void
Map::setCache( Cache* cache )
{
if (_cache.get() != cache)
{
_cache = cache;
if ( _cache.valid() )
{
_cache->store( _dbOptions.get() );
}
// Propagate the cache to any of our layers
for (ImageLayerVector::iterator i = _imageLayers.begin(); i != _imageLayers.end(); ++i)
{
i->get()->setDBOptions( _dbOptions.get() );
//i->get()->setCache( _cache.get() );
}
for (ElevationLayerVector::iterator i = _elevationLayers.begin(); i != _elevationLayers.end(); ++i)
{
i->get()->setDBOptions( _dbOptions.get() );
//i->get()->setCache( _cache.get() );
}
}
}
void onClick(Control*)
{
Map* map = s_mapNode->getMap();
ElevationLayerVector layers;
map->getLayers(layers);
map->beginUpdate();
for (ElevationLayerVector::iterator i = layers.begin(); i != layers.end(); ++i) {
map->removeLayer(i->get());
}
map->endUpdate();
}
void
Map::clear()
{
ImageLayerVector imageLayersRemoved;
ElevationLayerVector elevLayersRemoved;
ModelLayerVector modelLayersRemoved;
MaskLayerVector maskLayersRemoved;
Revision newRevision;
{
Threading::ScopedWriteLock lock( _mapDataMutex );
imageLayersRemoved.swap( _imageLayers );
elevLayersRemoved.swap ( _elevationLayers );
modelLayersRemoved.swap( _modelLayers );
// calculate a new revision.
newRevision = ++_dataModelRevision;
}
// a separate block b/c we don't need the mutex
for( MapCallbackList::iterator i = _mapCallbacks.begin(); i != _mapCallbacks.end(); i++ )
{
for( ImageLayerVector::iterator k = imageLayersRemoved.begin(); k != imageLayersRemoved.end(); ++k )
i->get()->onMapModelChanged( MapModelChange(MapModelChange::REMOVE_IMAGE_LAYER, newRevision, k->get()) );
for( ElevationLayerVector::iterator k = elevLayersRemoved.begin(); k != elevLayersRemoved.end(); ++k )
i->get()->onMapModelChanged( MapModelChange(MapModelChange::REMOVE_ELEVATION_LAYER, newRevision, k->get()) );
for( ModelLayerVector::iterator k = modelLayersRemoved.begin(); k != modelLayersRemoved.end(); ++k )
i->get()->onMapModelChanged( MapModelChange(MapModelChange::REMOVE_MODEL_LAYER, newRevision, k->get()) );
}
}
void
Map::moveElevationLayer( ElevationLayer* layer, unsigned int newIndex )
{
unsigned int oldIndex = 0;
unsigned int actualIndex = 0;
Revision newRevision;
if ( layer )
{
Threading::ScopedWriteLock lock( _mapDataMutex );
// preserve the layer with a ref:
osg::ref_ptr<ElevationLayer> layerToMove = layer;
// find it:
ElevationLayerVector::iterator i_oldIndex = _elevationLayers.end();
for( ElevationLayerVector::iterator i = _elevationLayers.begin(); i != _elevationLayers.end(); i++, actualIndex++ )
{
if ( i->get() == layer )
{
i_oldIndex = i;
oldIndex = actualIndex;
break;
}
}
if ( i_oldIndex == _elevationLayers.end() )
return; // layer not found in list
// erase the old one and insert the new one.
_elevationLayers.erase( i_oldIndex );
_elevationLayers.insert( _elevationLayers.begin() + newIndex, layerToMove.get() );
newRevision = ++_dataModelRevision;
}
// a separate block b/c we don't need the mutex
if ( layer )
{
for( MapCallbackList::iterator i = _mapCallbacks.begin(); i != _mapCallbacks.end(); i++ )
{
i->get()->onMapModelChanged( MapModelChange(
MapModelChange::MOVE_ELEVATION_LAYER, newRevision, layer, oldIndex, newIndex) );
}
}
}
void
Map::setCache( Cache* cache )
{
if (_cache.get() != cache)
{
_cache = cache;
_cache->setReferenceURI( _mapOptions.referenceURI().value() );
//Propagate the cache to any of our layers
for (ImageLayerVector::iterator i = _imageLayers.begin(); i != _imageLayers.end(); ++i)
{
i->get()->setCache( _cache.get() );
}
for (ElevationLayerVector::iterator i = _elevationLayers.begin(); i != _elevationLayers.end(); ++i)
{
i->get()->setCache( _cache.get() );
}
}
}
void
Map::setLayersFromMap( const Map* map )
{
this->clear();
if ( map )
{
ImageLayerVector newImages;
map->getImageLayers( newImages );
for( ImageLayerVector::iterator i = newImages.begin(); i != newImages.end(); ++i )
addImageLayer( i->get() );
ElevationLayerVector newElev;
map->getElevationLayers( newElev );
for( ElevationLayerVector::iterator i = newElev.begin(); i != newElev.end(); ++i )
addElevationLayer( i->get() );
ModelLayerVector newModels;
map->getModelLayers( newModels );
for( ModelLayerVector::iterator i = newModels.begin(); i != newModels.end(); ++i )
addModelLayer( i->get() );
}
}
/** Packages an image layer as a TMS folder. */
int
makeTMS( osg::ArgumentParser& args )
{
// see if the user wants to override the type extension (imagery only)
std::string extension;
args.read( "--ext", extension );
// verbosity?
bool verbose = !args.read( "--quiet" );
// find a .earth file on the command line
std::string earthFile = findArgumentWithExtension( args, ".earth" );
/* if ( earthFile.empty() )
return usage( "Missing required .earth file" );
*/
// folder to which to write the TMS archive.
std::string rootFolder;
if( !args.read( "--out", rootFolder ) )
rootFolder = Stringify() << earthFile << ".tms_repo";
// whether to overwrite existing tile files
bool overwrite = false;
if( args.read( "--overwrite" ) )
overwrite = true;
// write out an earth file
std::string outEarth;
args.read( "--out-earth", outEarth );
std::string dbOptions;
args.read( "--db-options", dbOptions );
std::string::size_type n = 0;
while( (n = dbOptions.find( '"', n )) != dbOptions.npos )
{
dbOptions.erase( n, 1 );
}
osg::ref_ptr<osgDB::Options> options = new osgDB::Options( dbOptions );
std::vector< Bounds > bounds;
// restrict packaging to user-specified bounds.
double xmin = DBL_MAX, ymin = DBL_MAX, xmax = DBL_MIN, ymax = DBL_MIN;
while( args.read( "--bounds", xmin, ymin, xmax, ymax ) )
{
Bounds b;
b.xMin() = xmin, b.yMin() = ymin, b.xMax() = xmax, b.yMax() = ymax;
bounds.push_back( b );
}
// max level to which to generate
unsigned maxLevel = ~0;
args.read( "--max-level", maxLevel );
// whether to keep 'empty' tiles
bool keepEmpties = args.read( "--keep-empties" );
bool continueSingleColor = args.read( "--continue-single-color" );
// max level to which to generate
unsigned elevationPixelDepth = 32;
args.read( "--elevation-pixel-depth", elevationPixelDepth );
// load up the map
osg::ref_ptr<MapNode> mapNode = MapNode::load( args );
if( !mapNode.valid() )
return usage( "Failed to load a valid .earth file" );
// create a folder for the output
osgDB::makeDirectory( rootFolder );
if( !osgDB::fileExists( rootFolder ) )
return usage( "Failed to create root output folder" );
Map* map = mapNode->getMap();
// fire up a packager:
TMSPackager packager( map->getProfile(), options );
packager.setVerbose( verbose );
packager.setOverwrite( overwrite );
packager.setKeepEmptyImageTiles( keepEmpties );
packager.setSubdivideSingleColorImageTiles( continueSingleColor );
packager.setElevationPixelDepth( elevationPixelDepth );
if( maxLevel != ~0 )
packager.setMaxLevel( maxLevel );
if( bounds.size() > 0 )
{
for( unsigned int i = 0; i < bounds.size(); ++i )
{
Bounds b = bounds[i];
if( b.isValid() )
packager.addExtent( GeoExtent( map->getProfile()->getSRS(), b ) );
}
}
// new map for an output earth file if necessary.
osg::ref_ptr<Map> outMap = 0L;
if( !outEarth.empty() )
{
// copy the options from the source map first
outMap = new Map( map->getInitialMapOptions() );
}
// establish the output path of the earth file, if applicable:
std::string outEarthFile = osgDB::concatPaths( rootFolder, osgDB::getSimpleFileName( outEarth ) );
// package any image layers that are enabled:
ImageLayerVector imageLayers;
map->getImageLayers( imageLayers );
unsigned counter = 0;
for( ImageLayerVector::iterator i = imageLayers.begin(); i != imageLayers.end(); ++i, ++counter )
{
ImageLayer* layer = i->get();
if( layer->getImageLayerOptions().enabled() == true )
{
std::string layerFolder = toLegalFileName( layer->getName() );
if( layerFolder.empty() )
layerFolder = Stringify() << "image_layer_" << counter;
if( verbose )
{
OE_NOTICE << LC << "Packaging image layer \"" << layerFolder << "\"" << std::endl;
}
osg::ref_ptr< ConsoleProgressCallback > progress = new ConsoleProgressCallback();
std::string layerRoot = osgDB::concatPaths( rootFolder, layerFolder );
TMSPackager::Result r = packager.package( layer, layerRoot, progress, extension );
if( r.ok )
{
// save to the output map if requested:
if( outMap.valid() )
{
// new TMS driver info:
TMSOptions tms;
tms.url() = URI(
osgDB::concatPaths( layerFolder, "tms.xml" ),
outEarthFile );
ImageLayerOptions layerOptions( layer->getName(), tms );
layerOptions.mergeConfig( layer->getInitialOptions().getConfig( true ) );
layerOptions.cachePolicy() = CachePolicy::NO_CACHE;
outMap->addImageLayer( new ImageLayer( layerOptions ) );
}
}
else
{
OE_WARN << LC << r.message << std::endl;
}
}
else if( verbose )
{
OE_NOTICE << LC << "Skipping disabled layer \"" << layer->getName() << "\"" << std::endl;
}
}
// package any elevation layers that are enabled:
counter = 0;
ElevationLayerVector elevationLayers;
map->getElevationLayers( elevationLayers );
for( ElevationLayerVector::iterator i = elevationLayers.begin(); i != elevationLayers.end(); ++i, ++counter )
{
ElevationLayer* layer = i->get();
if( layer->getElevationLayerOptions().enabled() == true )
{
std::string layerFolder = toLegalFileName( layer->getName() );
if( layerFolder.empty() )
layerFolder = Stringify() << "elevation_layer_" << counter;
if( verbose )
{
OE_NOTICE << LC << "Packaging elevation layer \"" << layerFolder << "\"" << std::endl;
}
std::string layerRoot = osgDB::concatPaths( rootFolder, layerFolder );
TMSPackager::Result r = packager.package( layer, layerRoot );
if( r.ok )
{
// save to the output map if requested:
if( outMap.valid() )
{
// new TMS driver info:
TMSOptions tms;
tms.url() = URI(
osgDB::concatPaths( layerFolder, "tms.xml" ),
outEarthFile );
ElevationLayerOptions layerOptions( layer->getName(), tms );
layerOptions.mergeConfig( layer->getInitialOptions().getConfig( true ) );
layerOptions.cachePolicy() = CachePolicy::NO_CACHE;
outMap->addElevationLayer( new ElevationLayer( layerOptions ) );
}
}
else
{
OE_WARN << LC << r.message << std::endl;
}
}
else if( verbose )
{
OE_NOTICE << LC << "Skipping disabled layer \"" << layer->getName() << "\"" << std::endl;
}
}
// Finally, write an earth file if requested:
if( outMap.valid() )
{
MapNodeOptions outNodeOptions = mapNode->getMapNodeOptions();
osg::ref_ptr<MapNode> outMapNode = new MapNode( outMap.get(), outNodeOptions );
if( !osgDB::writeNodeFile( *outMapNode.get(), outEarthFile ) )
{
OE_WARN << LC << "Error writing earth file to \"" << outEarthFile << "\"" << std::endl;
}
else if( verbose )
{
OE_NOTICE << LC << "Wrote earth file to \"" << outEarthFile << "\"" << std::endl;
}
}
return 0;
}
void
Map::calculateProfile()
{
if ( !_profile.valid() )
{
osg::ref_ptr<const Profile> userProfile;
if ( _mapOptions.profile().isSet() )
{
userProfile = Profile::create( _mapOptions.profile().value() );
}
if ( _mapOptions.coordSysType() == MapOptions::CSTYPE_GEOCENTRIC )
{
if ( userProfile.valid() )
{
if ( userProfile->isOK() && userProfile->getSRS()->isGeographic() )
{
_profile = userProfile.get();
}
else
{
OE_WARN << LC
<< "Map is geocentric, but the configured profile SRS ("
<< userProfile->getSRS()->getName() << ") is not geographic; "
<< "it will be ignored."
<< std::endl;
}
}
if ( !_profile.valid() )
{
// by default, set a geocentric map to use global-geodetic WGS84.
_profile = osgEarth::Registry::instance()->getGlobalGeodeticProfile();
}
}
else if ( _mapOptions.coordSysType() == MapOptions::CSTYPE_GEOCENTRIC_CUBE )
{
//If the map type is a Geocentric Cube, set the profile to the cube profile.
_profile = osgEarth::Registry::instance()->getCubeProfile();
}
else // CSTYPE_PROJECTED
{
if ( userProfile.valid() )
{
_profile = userProfile.get();
}
}
// At this point, if we don't have a profile we need to search tile sources until we find one.
if ( !_profile.valid() )
{
Threading::ScopedReadLock lock( _mapDataMutex );
for( ImageLayerVector::iterator i = _imageLayers.begin(); i != _imageLayers.end() && !_profile.valid(); i++ )
{
ImageLayer* layer = i->get();
if ( layer->getTileSource() )
{
_profile = layer->getTileSource()->getProfile();
}
}
for( ElevationLayerVector::iterator i = _elevationLayers.begin(); i != _elevationLayers.end() && !_profile.valid(); i++ )
{
ElevationLayer* layer = i->get();
if ( layer->getTileSource() )
{
_profile = layer->getTileSource()->getProfile();
}
}
}
// convert the profile to Plate Carre if necessary.
if (_profile.valid() &&
_profile->getSRS()->isGeographic() &&
getMapOptions().coordSysType() == MapOptions::CSTYPE_PROJECTED )
{
OE_INFO << LC << "Projected display with geographic SRS; activating Plate Carre mode" << std::endl;
_profile = _profile->overrideSRS( _profile->getSRS()->createPlateCarreGeographicSRS() );
}
// finally, fire an event if the profile has been set.
if ( _profile.valid() )
{
OE_INFO << LC << "Map profile is: " << _profile->toString() << std::endl;
for( MapCallbackList::iterator i = _mapCallbacks.begin(); i != _mapCallbacks.end(); i++ )
{
i->get()->onMapInfoEstablished( MapInfo(this) );
}
}
else
{
OE_WARN << LC << "Warning, not yet able to establish a map profile!" << std::endl;
}
}
if ( _profile.valid() )
{
// tell all the loaded layers what the profile is, as a hint
{
Threading::ScopedWriteLock lock( _mapDataMutex );
for( ImageLayerVector::iterator i = _imageLayers.begin(); i != _imageLayers.end(); i++ )
{
ImageLayer* layer = i->get();
if ( layer->getEnabled() == true )
{
layer->setTargetProfileHint( _profile.get() );
}
}
for( ElevationLayerVector::iterator i = _elevationLayers.begin(); i != _elevationLayers.end(); i++ )
{
ElevationLayer* layer = i->get();
if ( layer->getEnabled() )
{
layer->setTargetProfileHint( _profile.get() );
}
}
}
// create a "proxy" profile to use when querying elevation layers with a vertical datum
if ( _profile->getSRS()->getVerticalDatum() != 0L )
{
ProfileOptions po = _profile->toProfileOptions();
po.vsrsString().unset();
_profileNoVDatum = Profile::create(po);
}
else
{
_profileNoVDatum = _profile;
}
}
}
/** Packages an image layer as a TMS folder. */
int
makeTMS( osg::ArgumentParser& args )
{
// see if the user wants to override the type extension (imagery only)
std::string extension = "png";
args.read( "--ext", extension );
// verbosity?
bool verbose = !args.read( "--quiet" );
// find a .earth file on the command line
std::string earthFile = findArgumentWithExtension(args, ".earth");
if ( earthFile.empty() )
return usage( "Missing required .earth file" );
// folder to which to write the TMS archive.
std::string rootFolder;
if ( !args.read( "--out", rootFolder ) )
rootFolder = Stringify() << earthFile << ".tms_repo";
// max level to which to generate
unsigned maxLevel = ~0;
args.read( "--max-level", maxLevel );
// load up the map
osg::ref_ptr<MapNode> mapNode = MapNode::load( args );
if ( !mapNode.valid() )
return usage( "Failed to load a valid .earth file" );
// create a folder for the output
osgDB::makeDirectory(rootFolder);
if ( !osgDB::fileExists(rootFolder) )
return usage("Failed to create root output folder" );
Map* map = mapNode->getMap();
// fire up a packager:
TMSPackager packager( map->getProfile() );
packager.setVerbose( verbose );
if ( maxLevel != ~0 )
packager.setMaxLevel( maxLevel );
// package any image layers that are enabled:
ImageLayerVector imageLayers;
map->getImageLayers( imageLayers );
unsigned counter = 0;
for( ImageLayerVector::iterator i = imageLayers.begin(); i != imageLayers.end(); ++i, ++counter )
{
ImageLayer* layer = i->get();
if ( layer->getImageLayerOptions().enabled() == true )
{
std::string layerFolder = toLegalFileName( layer->getName() );
if ( layerFolder.empty() )
layerFolder = Stringify() << "image_layer_" << counter;
if ( verbose )
{
OE_NOTICE << LC << "Packaging image layer \"" << layerFolder << "\"" << std::endl;
}
std::string layerRoot = osgDB::concatPaths( rootFolder, layerFolder );
TMSPackager::Result r = packager.package( layer, layerRoot, extension );
if ( !r.ok )
{
OE_WARN << LC << r.message << std::endl;
}
}
else if ( verbose )
{
OE_NOTICE << LC << "Skipping disabled layer \"" << layer->getName() << "\"" << std::endl;
}
}
// package any elevation layers that are enabled:
counter = 0;
ElevationLayerVector elevationLayers;
map->getElevationLayers( elevationLayers );
for( ElevationLayerVector::iterator i = elevationLayers.begin(); i != elevationLayers.end(); ++i, ++counter )
{
ElevationLayer* layer = i->get();
if ( layer->getElevationLayerOptions().enabled() == true )
{
std::string layerFolder = toLegalFileName( layer->getName() );
if ( layerFolder.empty() )
layerFolder = Stringify() << "elevation_layer_" << counter;
if ( verbose )
{
OE_NOTICE << LC << "Packaging elevation layer \"" << layerFolder << "\"" << std::endl;
}
std::string layerRoot = osgDB::concatPaths( rootFolder, layerFolder );
packager.package( layer, layerRoot );
}
else if ( verbose )
{
OE_NOTICE << LC << "Skipping disabled layer \"" << layer->getName() << "\"" << std::endl;
}
}
return 0;
}
void
Map::calculateProfile()
{
if ( !_profile.valid() )
{
osg::ref_ptr<const Profile> userProfile;
if ( _mapOptions.profile().isSet() )
{
userProfile = Profile::create( _mapOptions.profile().value() );
}
if ( _mapOptions.coordSysType() == MapOptions::CSTYPE_GEOCENTRIC )
{
if ( userProfile.valid() )
{
if ( userProfile->isOK() && userProfile->getSRS()->isGeographic() )
{
_profile = userProfile.get();
}
else
{
OE_WARN << LC
<< "Map is geocentric, but the configured profile does not "
<< "have a geographic SRS. Falling back on default.."
<< std::endl;
}
}
if ( !_profile.valid() )
{
// by default, set a geocentric map to use global-geodetic WGS84.
_profile = osgEarth::Registry::instance()->getGlobalGeodeticProfile();
}
}
else if ( _mapOptions.coordSysType() == MapOptions::CSTYPE_GEOCENTRIC_CUBE )
{
//If the map type is a Geocentric Cube, set the profile to the cube profile.
_profile = osgEarth::Registry::instance()->getCubeProfile();
}
else // CSTYPE_PROJECTED
{
if ( userProfile.valid() )
{
_profile = userProfile.get();
}
}
// At this point, if we don't have a profile we need to search tile sources until we find one.
if ( !_profile.valid() )
{
Threading::ScopedReadLock lock( _mapDataMutex );
for( ImageLayerVector::iterator i = _imageLayers.begin(); i != _imageLayers.end() && !_profile.valid(); i++ )
{
ImageLayer* layer = i->get();
if ( layer->getTileSource() )
{
_profile = layer->getTileSource()->getProfile();
}
}
for( ElevationLayerVector::iterator i = _elevationLayers.begin(); i != _elevationLayers.end() && !_profile.valid(); i++ )
{
ElevationLayer* layer = i->get();
if ( layer->getTileSource() )
{
_profile = layer->getTileSource()->getProfile();
}
}
}
// finally, fire an event if the profile has been set.
if ( _profile.valid() )
{
OE_INFO << LC << "Map profile is: " << _profile->toString() << std::endl;
for( MapCallbackList::iterator i = _mapCallbacks.begin(); i != _mapCallbacks.end(); i++ )
{
i->get()->onMapInfoEstablished( MapInfo(this) );
}
}
else
{
OE_WARN << LC << "Warning, not yet able to establish a map profile!" << std::endl;
}
}
if ( _profile.valid() )
{
// tell all the loaded layers what the profile is, as a hint
{
Threading::ScopedWriteLock lock( _mapDataMutex );
for( ImageLayerVector::iterator i = _imageLayers.begin(); i != _imageLayers.end(); i++ )
{
ImageLayer* layer = i->get();
layer->setTargetProfileHint( _profile.get() );
}
for( ElevationLayerVector::iterator i = _elevationLayers.begin(); i != _elevationLayers.end(); i++ )
{
ElevationLayer* layer = i->get();
layer->setTargetProfileHint( _profile.get() );
}
}
}
}
/** Packages image and elevation layers as a TMS. */
int TMSExporter::exportTMS(MapNode* mapNode, const std::string& path, std::vector< osgEarth::Bounds >& bounds, const std::string& outEarth, bool overwrite, const std::string& extension)
{
if ( !mapNode )
{
_errorMessage = "Invalid MapNode";
if (_progress.valid()) _progress->onCompleted();
return 0;
}
// folder to which to write the TMS archive.
std::string rootFolder = path;
osg::ref_ptr<osgDB::Options> options = new osgDB::Options(_dbOptions);
// create a folder for the output
osgDB::makeDirectory(rootFolder);
if ( !osgDB::fileExists(rootFolder) )
{
_errorMessage = "Failed to create root output folder";
if (_progress.valid()) _progress->onCompleted();
return 0;
}
Map* map = mapNode->getMap();
// new map for an output earth file if necessary.
osg::ref_ptr<Map> outMap = 0L;
if ( !outEarth.empty() )
{
// copy the options from the source map first
outMap = new Map(map->getInitialMapOptions());
}
// establish the output path of the earth file, if applicable:
std::string outEarthName = osgDB::getSimpleFileName(outEarth);
if (outEarthName.length() > 0 && osgEarth::toLower(osgDB::getFileExtension(outEarthName)) != "earth")
outEarthName += ".earth";
std::string outEarthFile = osgDB::concatPaths(rootFolder, outEarthName);
// semaphore and tasks collection for multithreading
osgEarth::Threading::MultiEvent semaphore;
osgEarth::TaskRequestVector tasks;
int taskCount = 0;
// package any image layers that are enabled and visible
ImageLayerVector imageLayers;
map->getImageLayers( imageLayers );
unsigned imageCount = 0;
for( ImageLayerVector::iterator i = imageLayers.begin(); i != imageLayers.end(); ++i, ++imageCount )
{
ImageLayer* layer = i->get();
if ( layer->getEnabled() && layer->getVisible() )
{
std::string layerFolder = toLegalFileName( layer->getName() );
if ( layerFolder.empty() )
layerFolder = Stringify() << "image_layer_" << imageCount;
ParallelTask<PackageLayer>* task = new ParallelTask<PackageLayer>( &semaphore );
task->init(map, layer, options, rootFolder, layerFolder, true, overwrite, _keepEmpties, _maxLevel, extension, bounds);
task->setProgressCallback(new PackageLayerProgressCallback(this));
tasks.push_back(task);
taskCount++;
}
}
// package any elevation layers that are enabled and visible
ElevationLayerVector elevationLayers;
map->getElevationLayers( elevationLayers );
int elevCount = 0;
for( ElevationLayerVector::iterator i = elevationLayers.begin(); i != elevationLayers.end(); ++i, ++elevCount )
{
ElevationLayer* layer = i->get();
if ( layer->getEnabled() && layer->getVisible() )
{
std::string layerFolder = toLegalFileName( layer->getName() );
if ( layerFolder.empty() )
layerFolder = Stringify() << "elevation_layer_" << elevCount;
ParallelTask<PackageLayer>* task = new ParallelTask<PackageLayer>( &semaphore );
task->init(map, layer, options, rootFolder, layerFolder, true, overwrite, _keepEmpties, _maxLevel, extension, bounds);
task->setProgressCallback(new PackageLayerProgressCallback(this));
tasks.push_back(task);
taskCount++;
}
}
// Run all the tasks in parallel
_totalTasks = taskCount;
_completedTasks = 0;
semaphore.reset( _totalTasks );
for( TaskRequestVector::iterator i = tasks.begin(); i != tasks.end(); ++i )
_taskService->add( i->get() );
// Wait for them to complete
semaphore.wait();
// Add successfully packaged layers to the new map object and
// write out the .earth file (if requested)
if (outMap.valid())
{
for( TaskRequestVector::iterator i = tasks.begin(); i != tasks.end(); ++i )
{
PackageLayer* p = dynamic_cast<PackageLayer*>(i->get());
if (p)
{
if (p->_packageResult.ok)
{
TMSOptions tms;
tms.url() = URI(osgDB::concatPaths(p->_layerFolder, "tms.xml"), outEarthFile );
if (p->_imageLayer.valid())
{
ImageLayerOptions layerOptions( p->_imageLayer->getName(), tms );
layerOptions.mergeConfig( p->_imageLayer->getInitialOptions().getConfig(true) );
layerOptions.cachePolicy() = CachePolicy::NO_CACHE;
outMap->addImageLayer( new ImageLayer(layerOptions) );
}
else
{
ElevationLayerOptions layerOptions( p->_elevationLayer->getName(), tms );
layerOptions.mergeConfig( p->_elevationLayer->getInitialOptions().getConfig(true) );
layerOptions.cachePolicy() = CachePolicy::NO_CACHE;
outMap->addElevationLayer( new ElevationLayer(layerOptions) );
}
}
else
{
OE_WARN << LC << p->_packageResult.message << std::endl;
}
}
}
}
if ( outMap.valid() )
{
MapNodeOptions outNodeOptions = mapNode->getMapNodeOptions();
osg::ref_ptr<MapNode> outMapNode = new MapNode(outMap.get(), outNodeOptions);
if ( !osgDB::writeNodeFile(*outMapNode.get(), outEarthFile) )
{
OE_WARN << LC << "Error writing earth file to \"" << outEarthFile << "\"" << std::endl;
}
else
{
OE_NOTICE << LC << "Wrote earth file to \"" << outEarthFile << "\"" << std::endl;
}
}
// Mark the progress callback as completed
if (_progress.valid()) _progress->onCompleted();
return elevCount + imageCount;
}
