void PICKER_TOOL::setControls()
{
KIGFX::VIEW_CONTROLS* controls = getViewControls();
controls->ShowCursor( m_cursorVisible );
controls->SetSnapping( m_cursorSnapping );
controls->CaptureCursor( m_cursorCapture );
controls->SetAutoPan( m_autoPanning );
}
int PCB_EDITOR_CONTROL::PlaceModule( const TOOL_EVENT& aEvent )
{
MODULE* module = NULL;
KIGFX::VIEW* view = getView();
KIGFX::VIEW_CONTROLS* controls = getViewControls();
BOARD* board = getModel<BOARD>();
// Add a VIEW_GROUP that serves as a preview for the new item
KIGFX::VIEW_GROUP preview( view );
view->Add( &preview );
m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
controls->ShowCursor( true );
controls->SetSnapping( true );
Activate();
m_frame->SetToolID( ID_PCB_MODULE_BUTT, wxCURSOR_HAND, _( "Add footprint" ) );
// Main loop: keep receiving events
while( OPT_TOOL_EVENT evt = Wait() )
{
VECTOR2I cursorPos = controls->GetCursorPosition();
if( evt->IsCancel() || evt->IsActivate() )
{
if( module )
{
board->Delete( module ); // it was added by LoadModuleFromLibrary()
module = NULL;
preview.Clear();
preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
controls->ShowCursor( true );
}
else
break;
if( evt->IsActivate() ) // now finish unconditionally
break;
}
else if( module && evt->Category() == TC_COMMAND )
{
if( evt->IsAction( &COMMON_ACTIONS::rotate ) )
{
module->Rotate( module->GetPosition(), m_frame->GetRotationAngle() );
preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
}
else if( evt->IsAction( &COMMON_ACTIONS::flip ) )
{
module->Flip( module->GetPosition() );
preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
}
}
else if( evt->IsClick( BUT_LEFT ) )
{
if( !module )
{
// Pick the module to be placed
module = m_frame->LoadModuleFromLibrary( wxEmptyString,
m_frame->Prj().PcbFootprintLibs(),
true, NULL );
if( module == NULL )
continue;
module->SetPosition( wxPoint( cursorPos.x, cursorPos.y ) );
// Add all the drawable parts to preview
preview.Add( module );
module->RunOnChildren( boost::bind( &KIGFX::VIEW_GROUP::Add, &preview, _1 ) );
preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
}
else
{
// Place the selected module
module->RunOnChildren( boost::bind( &KIGFX::VIEW::Add, view, _1 ) );
view->Add( module );
module->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
m_frame->OnModify();
m_frame->SaveCopyInUndoList( module, UR_NEW );
// Remove from preview
preview.Remove( module );
module->RunOnChildren( boost::bind( &KIGFX::VIEW_GROUP::Remove, &preview, _1 ) );
module = NULL; // to indicate that there is no module that we currently modify
}
bool placing = ( module != NULL );
controls->SetAutoPan( placing );
controls->CaptureCursor( placing );
controls->ShowCursor( !placing );
}
else if( module && evt->IsMotion() )
{
module->SetPosition( wxPoint( cursorPos.x, cursorPos.y ) );
preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
}
}
controls->ShowCursor( false );
controls->SetSnapping( false );
controls->SetAutoPan( false );
controls->CaptureCursor( false );
view->Remove( &preview );
m_frame->SetToolID( ID_NO_TOOL_SELECTED, wxCURSOR_DEFAULT, wxEmptyString );
return 0;
}
int PCB_EDITOR_CONTROL::PlaceTarget( const TOOL_EVENT& aEvent )
{
KIGFX::VIEW* view = getView();
KIGFX::VIEW_CONTROLS* controls = getViewControls();
BOARD* board = getModel<BOARD>();
PCB_TARGET* target = new PCB_TARGET( board );
// Init the new item attributes
target->SetLayer( Edge_Cuts );
target->SetWidth( board->GetDesignSettings().m_EdgeSegmentWidth );
target->SetSize( Millimeter2iu( 5 ) );
VECTOR2I cursorPos = controls->GetCursorPosition();
target->SetPosition( wxPoint( cursorPos.x, cursorPos.y ) );
// Add a VIEW_GROUP that serves as a preview for the new item
KIGFX::VIEW_GROUP preview( view );
preview.Add( target );
view->Add( &preview );
preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
controls->SetSnapping( true );
controls->SetAutoPan( true );
controls->CaptureCursor( true );
Activate();
m_frame->SetToolID( ID_PCB_MIRE_BUTT, wxCURSOR_PENCIL, _( "Add layer alignment target" ) );
// Main loop: keep receiving events
while( OPT_TOOL_EVENT evt = Wait() )
{
cursorPos = controls->GetCursorPosition();
if( evt->IsCancel() || evt->IsActivate() )
break;
else if( evt->IsAction( &COMMON_ACTIONS::incWidth ) )
{
target->SetWidth( target->GetWidth() + WIDTH_STEP );
preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
}
else if( evt->IsAction( &COMMON_ACTIONS::decWidth ) )
{
int width = target->GetWidth();
if( width > WIDTH_STEP )
{
target->SetWidth( width - WIDTH_STEP );
preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
}
}
else if( evt->IsClick( BUT_LEFT ) )
{
assert( target->GetSize() > 0 );
assert( target->GetWidth() > 0 );
view->Add( target );
board->Add( target );
target->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
m_frame->OnModify();
m_frame->SaveCopyInUndoList( target, UR_NEW );
preview.Remove( target );
// Create next PCB_TARGET
target = new PCB_TARGET( *target );
preview.Add( target );
}
else if( evt->IsMotion() )
{
target->SetPosition( wxPoint( cursorPos.x, cursorPos.y ) );
preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
}
}
delete target;
controls->SetSnapping( false );
controls->SetAutoPan( false );
controls->CaptureCursor( false );
view->Remove( &preview );
setTransitions();
m_frame->SetToolID( ID_NO_TOOL_SELECTED, wxCURSOR_DEFAULT, wxEmptyString );
return 0;
}
int PCB_EDITOR_CONTROL::PlaceModule( const TOOL_EVENT& aEvent )
{
MODULE* module = NULL;
KIGFX::VIEW* view = getView();
KIGFX::VIEW_CONTROLS* controls = getViewControls();
BOARD* board = getModel<BOARD>();
// Add a VIEW_GROUP that serves as a preview for the new item
KIGFX::VIEW_GROUP preview( view );
view->Add( &preview );
m_toolMgr->RunAction( PCB_ACTIONS::selectionClear, true );
controls->ShowCursor( true );
controls->SetSnapping( true );
Activate();
m_frame->SetToolID( ID_PCB_MODULE_BUTT, wxCURSOR_HAND, _( "Add footprint" ) );
// Main loop: keep receiving events
while( OPT_TOOL_EVENT evt = Wait() )
{
VECTOR2I cursorPos = controls->GetCursorPosition();
if( evt->IsCancel() || evt->IsActivate() )
{
if( module )
{
delete module;
module = NULL;
preview.Clear();
controls->ShowCursor( true );
}
else
break;
if( evt->IsActivate() ) // now finish unconditionally
break;
}
else if( module && evt->Category() == TC_COMMAND )
{
if( TOOL_EVT_UTILS::IsRotateToolEvt( *evt ) )
{
const auto rotationAngle = TOOL_EVT_UTILS::GetEventRotationAngle(
*m_frame, *evt );
module->Rotate( module->GetPosition(), rotationAngle );
view->Update( &preview );
}
else if( evt->IsAction( &PCB_ACTIONS::flip ) )
{
module->Flip( module->GetPosition() );
view->Update( &preview );
}
}
else if( evt->IsClick( BUT_LEFT ) )
{
if( !module )
{
// Pick the module to be placed
module = m_frame->LoadModuleFromLibrary( wxEmptyString,
m_frame->Prj().PcbFootprintLibs(),
true, NULL );
if( module == NULL )
continue;
// Module has been added in LoadModuleFromLibrary(),
// so we have to remove it before committing the change @todo LEGACY
board->Remove( module );
module->SetPosition( wxPoint( cursorPos.x, cursorPos.y ) );
// Add all the drawable parts to preview
preview.Add( module );
module->RunOnChildren( std::bind( &KIGFX::VIEW_GROUP::Add, &preview, _1 ) );
}
else
{
BOARD_COMMIT commit( m_frame );
commit.Add( module );
commit.Push( _( "Place a module" ) );
// Remove from preview
preview.Remove( module );
module->RunOnChildren( std::bind( &KIGFX::VIEW_GROUP::Remove, &preview, _1 ) );
module = NULL; // to indicate that there is no module that we currently modify
}
bool placing = ( module != NULL );
controls->SetAutoPan( placing );
controls->CaptureCursor( placing );
controls->ShowCursor( !placing );
}
else if( module && evt->IsMotion() )
{
module->SetPosition( wxPoint( cursorPos.x, cursorPos.y ) );
view->Update( &preview );
}
}
view->Remove( &preview );
m_frame->SetToolID( ID_NO_TOOL_SELECTED, wxCURSOR_DEFAULT, wxEmptyString );
return 0;
}
