/// collectRegsToSpill - Collect live range snippets that only have a single
/// real use.
void InlineSpiller::collectRegsToSpill() {
unsigned Reg = Edit->getReg();
// Main register always spills.
RegsToSpill.assign(1, Reg);
SnippetCopies.clear();
// Snippets all have the same original, so there can't be any for an original
// register.
if (Original == Reg)
return;
for (MachineRegisterInfo::reg_iterator RI = MRI.reg_begin(Reg);
MachineInstr *MI = RI.skipInstruction();) {
unsigned SnipReg = isFullCopyOf(MI, Reg);
if (!isSibling(SnipReg))
continue;
LiveInterval &SnipLI = LIS.getInterval(SnipReg);
if (!isSnippet(SnipLI))
continue;
SnippetCopies.insert(MI);
if (isRegToSpill(SnipReg))
continue;
RegsToSpill.push_back(SnipReg);
DEBUG(dbgs() << "\talso spill snippet " << SnipLI << '\n');
++NumSnippets;
}
}
void ConnectedVNInfoEqClasses::Distribute(LiveInterval *LIV[],
MachineRegisterInfo &MRI) {
assert(LIV[0] && "LIV[0] must be set");
LiveInterval &LI = *LIV[0];
// Rewrite instructions.
for (MachineRegisterInfo::reg_iterator RI = MRI.reg_begin(LI.reg),
RE = MRI.reg_end(); RI != RE;) {
MachineOperand &MO = *RI;
MachineInstr *MI = RI->getParent();
++RI;
// DBG_VALUE instructions don't have slot indexes, so get the index of the
// instruction before them.
// Normally, DBG_VALUE instructions are removed before this function is
// called, but it is not a requirement.
SlotIndex Idx;
if (MI->isDebugValue())
Idx = LIS.getSlotIndexes()->getIndexBefore(MI);
else
Idx = LIS.getInstructionIndex(MI);
LiveQueryResult LRQ = LI.Query(Idx);
const VNInfo *VNI = MO.readsReg() ? LRQ.valueIn() : LRQ.valueDefined();
// In the case of an <undef> use that isn't tied to any def, VNI will be
// NULL. If the use is tied to a def, VNI will be the defined value.
if (!VNI)
continue;
MO.setReg(LIV[getEqClass(VNI)]->reg);
}
// Move runs to new intervals.
LiveInterval::iterator J = LI.begin(), E = LI.end();
while (J != E && EqClass[J->valno->id] == 0)
++J;
for (LiveInterval::iterator I = J; I != E; ++I) {
if (unsigned eq = EqClass[I->valno->id]) {
assert((LIV[eq]->empty() || LIV[eq]->expiredAt(I->start)) &&
"New intervals should be empty");
LIV[eq]->segments.push_back(*I);
} else
*J++ = *I;
}
LI.segments.erase(J, E);
// Transfer VNInfos to their new owners and renumber them.
unsigned j = 0, e = LI.getNumValNums();
while (j != e && EqClass[j] == 0)
++j;
for (unsigned i = j; i != e; ++i) {
VNInfo *VNI = LI.getValNumInfo(i);
if (unsigned eq = EqClass[i]) {
VNI->id = LIV[eq]->getNumValNums();
LIV[eq]->valnos.push_back(VNI);
} else {
VNI->id = j;
LI.valnos[j++] = VNI;
}
}
LI.valnos.resize(j);
}
/// rewrite - after all the new live ranges have been created, rewrite
/// instructions using curli to use the new intervals.
void SplitEditor::rewrite() {
assert(!openli_ && "Previous LI not closed before rewrite");
const LiveInterval *curli = sa_.getCurLI();
for (MachineRegisterInfo::reg_iterator RI = mri_.reg_begin(curli->reg),
RE = mri_.reg_end(); RI != RE;) {
MachineOperand &MO = RI.getOperand();
MachineInstr *MI = MO.getParent();
++RI;
if (MI->isDebugValue()) {
DEBUG(dbgs() << "Zapping " << *MI);
// FIXME: We can do much better with debug values.
MO.setReg(0);
continue;
}
SlotIndex Idx = lis_.getInstructionIndex(MI);
Idx = MO.isUse() ? Idx.getUseIndex() : Idx.getDefIndex();
LiveInterval *LI = dupli_;
for (unsigned i = firstInterval, e = intervals_.size(); i != e; ++i) {
LiveInterval *testli = intervals_[i];
if (testli->liveAt(Idx)) {
LI = testli;
break;
}
}
if (LI) {
MO.setReg(LI->reg);
sa_.removeUse(MI);
DEBUG(dbgs() << " rewrite " << Idx << '\t' << *MI);
}
}
// dupli_ goes in last, after rewriting.
if (dupli_) {
if (dupli_->empty()) {
DEBUG(dbgs() << " dupli became empty?\n");
lis_.removeInterval(dupli_->reg);
dupli_ = 0;
} else {
dupli_->RenumberValues(lis_);
intervals_.push_back(dupli_);
}
}
// Calculate spill weight and allocation hints for new intervals.
VirtRegAuxInfo vrai(vrm_.getMachineFunction(), lis_, sa_.loops_);
for (unsigned i = firstInterval, e = intervals_.size(); i != e; ++i) {
LiveInterval &li = *intervals_[i];
vrai.CalculateRegClass(li.reg);
vrai.CalculateWeightAndHint(li);
DEBUG(dbgs() << " new interval " << mri_.getRegClass(li.reg)->getName()
<< ":" << li << '\n');
}
}
void ConnectedVNInfoEqClasses::Distribute(LiveInterval *LIV[],
MachineRegisterInfo &MRI) {
assert(LIV[0] && "LIV[0] must be set");
LiveInterval &LI = *LIV[0];
// Rewrite instructions.
for (MachineRegisterInfo::reg_iterator RI = MRI.reg_begin(LI.reg),
RE = MRI.reg_end(); RI != RE;) {
MachineOperand &MO = RI.getOperand();
MachineInstr *MI = MO.getParent();
++RI;
if (MO.isUse() && MO.isUndef())
continue;
// DBG_VALUE instructions should have been eliminated earlier.
SlotIndex Idx = LIS.getInstructionIndex(MI);
Idx = Idx.getRegSlot(MO.isUse());
const VNInfo *VNI = LI.getVNInfoAt(Idx);
assert(VNI && "Interval not live at use.");
MO.setReg(LIV[getEqClass(VNI)]->reg);
}
// Move runs to new intervals.
LiveInterval::iterator J = LI.begin(), E = LI.end();
while (J != E && EqClass[J->valno->id] == 0)
++J;
for (LiveInterval::iterator I = J; I != E; ++I) {
if (unsigned eq = EqClass[I->valno->id]) {
assert((LIV[eq]->empty() || LIV[eq]->expiredAt(I->start)) &&
"New intervals should be empty");
LIV[eq]->ranges.push_back(*I);
} else
*J++ = *I;
}
LI.ranges.erase(J, E);
// Transfer VNInfos to their new owners and renumber them.
unsigned j = 0, e = LI.getNumValNums();
while (j != e && EqClass[j] == 0)
++j;
for (unsigned i = j; i != e; ++i) {
VNInfo *VNI = LI.getValNumInfo(i);
if (unsigned eq = EqClass[i]) {
VNI->id = LIV[eq]->getNumValNums();
LIV[eq]->valnos.push_back(VNI);
} else {
VNI->id = j;
LI.valnos[j++] = VNI;
}
}
LI.valnos.resize(j);
}
void ConnectedVNInfoEqClasses::Distribute(LiveInterval *LIV[],
MachineRegisterInfo &MRI) {
assert(LIV[0] && "LIV[0] must be set");
LiveInterval &LI = *LIV[0];
// Rewrite instructions.
for (MachineRegisterInfo::reg_iterator RI = MRI.reg_begin(LI.reg),
RE = MRI.reg_end(); RI != RE;) {
MachineOperand &MO = RI.getOperand();
MachineInstr *MI = MO.getParent();
++RI;
// DBG_VALUE instructions should have been eliminated earlier.
LiveRangeQuery LRQ(LI, LIS.getInstructionIndex(MI));
const VNInfo *VNI = MO.readsReg() ? LRQ.valueIn() : LRQ.valueDefined();
// In the case of an <undef> use that isn't tied to any def, VNI will be
// NULL. If the use is tied to a def, VNI will be the defined value.
if (!VNI)
continue;
MO.setReg(LIV[getEqClass(VNI)]->reg);
}
// Move runs to new intervals.
LiveInterval::iterator J = LI.begin(), E = LI.end();
while (J != E && EqClass[J->valno->id] == 0)
++J;
for (LiveInterval::iterator I = J; I != E; ++I) {
if (unsigned eq = EqClass[I->valno->id]) {
assert((LIV[eq]->empty() || LIV[eq]->expiredAt(I->start)) &&
"New intervals should be empty");
LIV[eq]->ranges.push_back(*I);
} else
*J++ = *I;
}
LI.ranges.erase(J, E);
// Transfer VNInfos to their new owners and renumber them.
unsigned j = 0, e = LI.getNumValNums();
while (j != e && EqClass[j] == 0)
++j;
for (unsigned i = j; i != e; ++i) {
VNInfo *VNI = LI.getValNumInfo(i);
if (unsigned eq = EqClass[i]) {
VNI->id = LIV[eq]->getNumValNums();
LIV[eq]->valnos.push_back(VNI);
} else {
VNI->id = j;
LI.valnos[j++] = VNI;
}
}
LI.valnos.resize(j);
}
/// rewriteAssigned - Rewrite all uses of Edit->getReg().
void SplitEditor::rewriteAssigned(bool ExtendRanges) {
for (MachineRegisterInfo::reg_iterator RI = MRI.reg_begin(Edit->getReg()),
RE = MRI.reg_end(); RI != RE;) {
MachineOperand &MO = RI.getOperand();
MachineInstr *MI = MO.getParent();
++RI;
// LiveDebugVariables should have handled all DBG_VALUE instructions.
if (MI->isDebugValue()) {
DEBUG(dbgs() << "Zapping " << *MI);
MO.setReg(0);
continue;
}
// <undef> operands don't really read the register, so it doesn't matter
// which register we choose. When the use operand is tied to a def, we must
// use the same register as the def, so just do that always.
SlotIndex Idx = LIS.getInstructionIndex(MI);
if (MO.isDef() || MO.isUndef())
Idx = MO.isEarlyClobber() ? Idx.getUseIndex() : Idx.getDefIndex();
// Rewrite to the mapped register at Idx.
unsigned RegIdx = RegAssign.lookup(Idx);
LiveInterval *LI = Edit->get(RegIdx);
MO.setReg(LI->reg);
DEBUG(dbgs() << " rewr BB#" << MI->getParent()->getNumber() << '\t'
<< Idx << ':' << RegIdx << '\t' << *MI);
// Extend liveness to Idx if the instruction reads reg.
if (!ExtendRanges || MO.isUndef())
continue;
// Skip instructions that don't read Reg.
if (MO.isDef()) {
if (!MO.getSubReg() && !MO.isEarlyClobber())
continue;
// We may wan't to extend a live range for a partial redef, or for a use
// tied to an early clobber.
Idx = Idx.getPrevSlot();
if (!Edit->getParent().liveAt(Idx))
continue;
} else
Idx = Idx.getUseIndex();
getLRCalc(RegIdx).extend(LI, Idx.getNextSlot(), LIS.getSlotIndexes(),
&MDT, &LIS.getVNInfoAllocator());
}
}
/// analyzeUses - Count instructions, basic blocks, and loops using curli.
void SplitAnalysis::analyzeUses() {
const MachineRegisterInfo &MRI = mf_.getRegInfo();
for (MachineRegisterInfo::reg_iterator I = MRI.reg_begin(curli_->reg);
MachineInstr *MI = I.skipInstruction();) {
if (MI->isDebugValue() || !usingInstrs_.insert(MI))
continue;
MachineBasicBlock *MBB = MI->getParent();
if (usingBlocks_[MBB]++)
continue;
if (MachineLoop *Loop = loops_.getLoopFor(MBB))
usingLoops_[Loop]++;
}
DEBUG(dbgs() << " counted "
<< usingInstrs_.size() << " instrs, "
<< usingBlocks_.size() << " blocks, "
<< usingLoops_.size() << " loops.\n");
}
/// spillAll - Spill all registers remaining after rematerialization.
void InlineSpiller::spillAll() {
// Update LiveStacks now that we are committed to spilling.
if (StackSlot == VirtRegMap::NO_STACK_SLOT) {
StackSlot = VRM.assignVirt2StackSlot(Original);
StackInt = &LSS.getOrCreateInterval(StackSlot, MRI.getRegClass(Original));
StackInt->getNextValue(SlotIndex(), LSS.getVNInfoAllocator());
} else
StackInt = &LSS.getInterval(StackSlot);
if (Original != Edit->getReg())
VRM.assignVirt2StackSlot(Edit->getReg(), StackSlot);
assert(StackInt->getNumValNums() == 1 && "Bad stack interval values");
for (unsigned i = 0, e = RegsToSpill.size(); i != e; ++i)
StackInt->MergeRangesInAsValue(LIS.getInterval(RegsToSpill[i]),
StackInt->getValNumInfo(0));
DEBUG(dbgs() << "Merged spilled regs: " << *StackInt << '\n');
// Spill around uses of all RegsToSpill.
for (unsigned i = 0, e = RegsToSpill.size(); i != e; ++i)
spillAroundUses(RegsToSpill[i]);
// Hoisted spills may cause dead code.
if (!DeadDefs.empty()) {
DEBUG(dbgs() << "Eliminating " << DeadDefs.size() << " dead defs\n");
Edit->eliminateDeadDefs(DeadDefs, RegsToSpill);
}
// Finally delete the SnippetCopies.
for (unsigned i = 0, e = RegsToSpill.size(); i != e; ++i) {
for (MachineRegisterInfo::reg_iterator RI = MRI.reg_begin(RegsToSpill[i]);
MachineInstr *MI = RI.skipInstruction();) {
assert(SnippetCopies.count(MI) && "Remaining use wasn't a snippet copy");
// FIXME: Do this with a LiveRangeEdit callback.
LIS.RemoveMachineInstrFromMaps(MI);
MI->eraseFromParent();
}
}
// Delete all spilled registers.
for (unsigned i = 0, e = RegsToSpill.size(); i != e; ++i)
Edit->eraseVirtReg(RegsToSpill[i]);
}
/// analyzeUses - Count instructions, basic blocks, and loops using CurLI.
void SplitAnalysis::analyzeUses() {
const MachineRegisterInfo &MRI = MF.getRegInfo();
for (MachineRegisterInfo::reg_iterator I = MRI.reg_begin(CurLI->reg);
MachineInstr *MI = I.skipInstruction();) {
if (MI->isDebugValue() || !UsingInstrs.insert(MI))
continue;
UseSlots.push_back(LIS.getInstructionIndex(MI).getDefIndex());
MachineBasicBlock *MBB = MI->getParent();
if (UsingBlocks[MBB]++)
continue;
for (MachineLoop *Loop = Loops.getLoopFor(MBB); Loop;
Loop = Loop->getParentLoop())
UsingLoops[Loop]++;
}
array_pod_sort(UseSlots.begin(), UseSlots.end());
DEBUG(dbgs() << " counted "
<< UsingInstrs.size() << " instrs, "
<< UsingBlocks.size() << " blocks, "
<< UsingLoops.size() << " loops.\n");
}
/// NoUseAfterLastDef - Return true if there are no intervening uses between the
/// last instruction in the MBB that defines the specified register and the
/// two-address instruction which is being processed. It also returns the last
/// def location by reference
bool TwoAddressInstructionPass::NoUseAfterLastDef(unsigned Reg,
MachineBasicBlock *MBB, unsigned Dist,
unsigned &LastDef) {
LastDef = 0;
unsigned LastUse = Dist;
for (MachineRegisterInfo::reg_iterator I = MRI->reg_begin(Reg),
E = MRI->reg_end(); I != E; ++I) {
MachineOperand &MO = I.getOperand();
MachineInstr *MI = MO.getParent();
if (MI->getParent() != MBB)
continue;
DenseMap<MachineInstr*, unsigned>::iterator DI = DistanceMap.find(MI);
if (DI == DistanceMap.end())
continue;
if (MO.isUse() && DI->second < LastUse)
LastUse = DI->second;
if (MO.isDef() && DI->second > LastDef)
LastDef = DI->second;
}
return !(LastUse > LastDef && LastUse < Dist);
}
MachineInstr *TwoAddressInstructionPass::FindLastUseInMBB(unsigned Reg,
MachineBasicBlock *MBB,
unsigned Dist) {
unsigned LastUseDist = 0;
MachineInstr *LastUse = 0;
for (MachineRegisterInfo::reg_iterator I = MRI->reg_begin(Reg),
E = MRI->reg_end(); I != E; ++I) {
MachineOperand &MO = I.getOperand();
MachineInstr *MI = MO.getParent();
if (MI->getParent() != MBB)
continue;
DenseMap<MachineInstr*, unsigned>::iterator DI = DistanceMap.find(MI);
if (DI == DistanceMap.end())
continue;
if (DI->second >= Dist)
continue;
if (MO.isUse() && DI->second > LastUseDist) {
LastUse = DI->first;
LastUseDist = DI->second;
}
}
return LastUse;
}
/// shrinkToUses - After removing some uses of a register, shrink its live
/// range to just the remaining uses. This method does not compute reaching
/// defs for new uses, and it doesn't remove dead defs.
bool LiveIntervals::shrinkToUses(LiveInterval *li,
SmallVectorImpl<MachineInstr*> *dead) {
DEBUG(dbgs() << "Shrink: " << *li << '\n');
assert(TargetRegisterInfo::isVirtualRegister(li->reg)
&& "Can only shrink virtual registers");
// Find all the values used, including PHI kills.
SmallVector<std::pair<SlotIndex, VNInfo*>, 16> WorkList;
// Blocks that have already been added to WorkList as live-out.
SmallPtrSet<MachineBasicBlock*, 16> LiveOut;
// Visit all instructions reading li->reg.
for (MachineRegisterInfo::reg_iterator I = MRI->reg_begin(li->reg);
MachineInstr *UseMI = I.skipInstruction();) {
if (UseMI->isDebugValue() || !UseMI->readsVirtualRegister(li->reg))
continue;
SlotIndex Idx = getInstructionIndex(UseMI).getRegSlot();
LiveRangeQuery LRQ(*li, Idx);
VNInfo *VNI = LRQ.valueIn();
if (!VNI) {
// This shouldn't happen: readsVirtualRegister returns true, but there is
// no live value. It is likely caused by a target getting <undef> flags
// wrong.
DEBUG(dbgs() << Idx << '\t' << *UseMI
<< "Warning: Instr claims to read non-existent value in "
<< *li << '\n');
continue;
}
// Special case: An early-clobber tied operand reads and writes the
// register one slot early.
if (VNInfo *DefVNI = LRQ.valueDefined())
Idx = DefVNI->def;
WorkList.push_back(std::make_pair(Idx, VNI));
}
// Create a new live interval with only minimal live segments per def.
LiveInterval NewLI(li->reg, 0);
for (LiveInterval::vni_iterator I = li->vni_begin(), E = li->vni_end();
I != E; ++I) {
VNInfo *VNI = *I;
if (VNI->isUnused())
continue;
NewLI.addRange(LiveRange(VNI->def, VNI->def.getDeadSlot(), VNI));
}
// Keep track of the PHIs that are in use.
SmallPtrSet<VNInfo*, 8> UsedPHIs;
// Extend intervals to reach all uses in WorkList.
while (!WorkList.empty()) {
SlotIndex Idx = WorkList.back().first;
VNInfo *VNI = WorkList.back().second;
WorkList.pop_back();
const MachineBasicBlock *MBB = getMBBFromIndex(Idx.getPrevSlot());
SlotIndex BlockStart = getMBBStartIdx(MBB);
// Extend the live range for VNI to be live at Idx.
if (VNInfo *ExtVNI = NewLI.extendInBlock(BlockStart, Idx)) {
(void)ExtVNI;
assert(ExtVNI == VNI && "Unexpected existing value number");
// Is this a PHIDef we haven't seen before?
if (!VNI->isPHIDef() || VNI->def != BlockStart || !UsedPHIs.insert(VNI))
continue;
// The PHI is live, make sure the predecessors are live-out.
for (MachineBasicBlock::const_pred_iterator PI = MBB->pred_begin(),
PE = MBB->pred_end(); PI != PE; ++PI) {
if (!LiveOut.insert(*PI))
continue;
SlotIndex Stop = getMBBEndIdx(*PI);
// A predecessor is not required to have a live-out value for a PHI.
if (VNInfo *PVNI = li->getVNInfoBefore(Stop))
WorkList.push_back(std::make_pair(Stop, PVNI));
}
continue;
}
// VNI is live-in to MBB.
DEBUG(dbgs() << " live-in at " << BlockStart << '\n');
NewLI.addRange(LiveRange(BlockStart, Idx, VNI));
// Make sure VNI is live-out from the predecessors.
for (MachineBasicBlock::const_pred_iterator PI = MBB->pred_begin(),
PE = MBB->pred_end(); PI != PE; ++PI) {
if (!LiveOut.insert(*PI))
continue;
SlotIndex Stop = getMBBEndIdx(*PI);
assert(li->getVNInfoBefore(Stop) == VNI &&
"Wrong value out of predecessor");
WorkList.push_back(std::make_pair(Stop, VNI));
}
}
// Handle dead values.
bool CanSeparate = false;
for (LiveInterval::vni_iterator I = li->vni_begin(), E = li->vni_end();
I != E; ++I) {
VNInfo *VNI = *I;
if (VNI->isUnused())
continue;
LiveInterval::iterator LII = NewLI.FindLiveRangeContaining(VNI->def);
assert(LII != NewLI.end() && "Missing live range for PHI");
if (LII->end != VNI->def.getDeadSlot())
continue;
if (VNI->isPHIDef()) {
// This is a dead PHI. Remove it.
VNI->markUnused();
NewLI.removeRange(*LII);
DEBUG(dbgs() << "Dead PHI at " << VNI->def << " may separate interval\n");
CanSeparate = true;
} else {
// This is a dead def. Make sure the instruction knows.
MachineInstr *MI = getInstructionFromIndex(VNI->def);
assert(MI && "No instruction defining live value");
MI->addRegisterDead(li->reg, TRI);
if (dead && MI->allDefsAreDead()) {
DEBUG(dbgs() << "All defs dead: " << VNI->def << '\t' << *MI);
dead->push_back(MI);
}
}
}
// Move the trimmed ranges back.
li->ranges.swap(NewLI.ranges);
DEBUG(dbgs() << "Shrunk: " << *li << '\n');
return CanSeparate;
}
/// ComputeLocalLiveness - Computes liveness of registers within a basic
/// block, setting the killed/dead flags as appropriate.
void RALocal::ComputeLocalLiveness(MachineBasicBlock& MBB) {
MachineRegisterInfo &MRI = MBB.getParent()->getRegInfo();
// Keep track of the most recently seen previous use or def of each reg,
// so that we can update them with dead/kill markers.
DenseMap<unsigned, std::pair<MachineInstr*, unsigned> > LastUseDef;
for (MachineBasicBlock::iterator I = MBB.begin(), E = MBB.end();
I != E; ++I) {
if (I->isDebugValue())
continue;
for (unsigned i = 0, e = I->getNumOperands(); i != e; ++i) {
MachineOperand &MO = I->getOperand(i);
// Uses don't trigger any flags, but we need to save
// them for later. Also, we have to process these
// _before_ processing the defs, since an instr
// uses regs before it defs them.
if (!MO.isReg() || !MO.getReg() || !MO.isUse())
continue;
LastUseDef[MO.getReg()] = std::make_pair(I, i);
if (TargetRegisterInfo::isVirtualRegister(MO.getReg())) continue;
const unsigned *Aliases = TRI->getAliasSet(MO.getReg());
if (Aliases == 0)
continue;
while (*Aliases) {
DenseMap<unsigned, std::pair<MachineInstr*, unsigned> >::iterator
alias = LastUseDef.find(*Aliases);
if (alias != LastUseDef.end() && alias->second.first != I)
LastUseDef[*Aliases] = std::make_pair(I, i);
++Aliases;
}
}
for (unsigned i = 0, e = I->getNumOperands(); i != e; ++i) {
MachineOperand &MO = I->getOperand(i);
// Defs others than 2-addr redefs _do_ trigger flag changes:
// - A def followed by a def is dead
// - A use followed by a def is a kill
if (!MO.isReg() || !MO.getReg() || !MO.isDef()) continue;
DenseMap<unsigned, std::pair<MachineInstr*, unsigned> >::iterator
last = LastUseDef.find(MO.getReg());
if (last != LastUseDef.end()) {
// Check if this is a two address instruction. If so, then
// the def does not kill the use.
if (last->second.first == I &&
I->isRegTiedToUseOperand(i))
continue;
MachineOperand &lastUD =
last->second.first->getOperand(last->second.second);
if (lastUD.isDef())
lastUD.setIsDead(true);
else
lastUD.setIsKill(true);
}
LastUseDef[MO.getReg()] = std::make_pair(I, i);
}
}
// Live-out (of the function) registers contain return values of the function,
// so we need to make sure they are alive at return time.
MachineBasicBlock::iterator Ret = MBB.getFirstTerminator();
bool BBEndsInReturn = (Ret != MBB.end() && Ret->getDesc().isReturn());
if (BBEndsInReturn)
for (MachineRegisterInfo::liveout_iterator
I = MF->getRegInfo().liveout_begin(),
E = MF->getRegInfo().liveout_end(); I != E; ++I)
if (!Ret->readsRegister(*I)) {
Ret->addOperand(MachineOperand::CreateReg(*I, false, true));
LastUseDef[*I] = std::make_pair(Ret, Ret->getNumOperands()-1);
}
// Finally, loop over the final use/def of each reg
// in the block and determine if it is dead.
for (DenseMap<unsigned, std::pair<MachineInstr*, unsigned> >::iterator
I = LastUseDef.begin(), E = LastUseDef.end(); I != E; ++I) {
MachineInstr *MI = I->second.first;
unsigned idx = I->second.second;
MachineOperand &MO = MI->getOperand(idx);
bool isPhysReg = TargetRegisterInfo::isPhysicalRegister(MO.getReg());
// A crude approximation of "live-out" calculation
bool usedOutsideBlock = isPhysReg ? false :
UsedInMultipleBlocks.test(MO.getReg() -
TargetRegisterInfo::FirstVirtualRegister);
// If the machine BB ends in a return instruction, then the value isn't used
// outside of the BB.
if (!isPhysReg && (!usedOutsideBlock || BBEndsInReturn)) {
// DBG_VALUE complicates this: if the only refs of a register outside
// this block are DBG_VALUE, we can't keep the reg live just for that,
// as it will cause the reg to be spilled at the end of this block when
// it wouldn't have been otherwise. Nullify the DBG_VALUEs when that
// happens.
bool UsedByDebugValueOnly = false;
for (MachineRegisterInfo::reg_iterator UI = MRI.reg_begin(MO.getReg()),
UE = MRI.reg_end(); UI != UE; ++UI) {
// Two cases:
// - used in another block
// - used in the same block before it is defined (loop)
if (UI->getParent() == &MBB &&
!(MO.isDef() && UI.getOperand().isUse() && precedes(&*UI, MI)))
continue;
if (UI->isDebugValue()) {
UsedByDebugValueOnly = true;
continue;
}
// A non-DBG_VALUE use means we can leave DBG_VALUE uses alone.
UsedInMultipleBlocks.set(MO.getReg() -
TargetRegisterInfo::FirstVirtualRegister);
usedOutsideBlock = true;
UsedByDebugValueOnly = false;
break;
}
if (UsedByDebugValueOnly)
for (MachineRegisterInfo::reg_iterator UI = MRI.reg_begin(MO.getReg()),
UE = MRI.reg_end(); UI != UE; ++UI)
if (UI->isDebugValue() &&
(UI->getParent() != &MBB ||
(MO.isDef() && precedes(&*UI, MI))))
UI.getOperand().setReg(0U);
}
// Physical registers and those that are not live-out of the block are
// killed/dead at their last use/def within this block.
if (isPhysReg || !usedOutsideBlock || BBEndsInReturn) {
if (MO.isUse()) {
// Don't mark uses that are tied to defs as kills.
if (!MI->isRegTiedToDefOperand(idx))
MO.setIsKill(true);
} else {
MO.setIsDead(true);
}
}
}
}
/// hasRegisterUseBelow - Return true if the specified register is used after
/// the current instruction and before it's next definition.
bool LiveVariables::hasRegisterUseBelow(unsigned Reg,
MachineBasicBlock::iterator I,
MachineBasicBlock *MBB) {
if (I == MBB->end())
return false;
// First find out if there are any uses / defs below.
bool hasDistInfo = true;
unsigned CurDist = DistanceMap[I];
SmallVector<MachineInstr*, 4> Uses;
SmallVector<MachineInstr*, 4> Defs;
for (MachineRegisterInfo::reg_iterator RI = MRI->reg_begin(Reg),
RE = MRI->reg_end(); RI != RE; ++RI) {
MachineOperand &UDO = RI.getOperand();
MachineInstr *UDMI = &*RI;
if (UDMI->getParent() != MBB)
continue;
DenseMap<MachineInstr*, unsigned>::iterator DI = DistanceMap.find(UDMI);
bool isBelow = false;
if (DI == DistanceMap.end()) {
// Must be below if it hasn't been assigned a distance yet.
isBelow = true;
hasDistInfo = false;
} else if (DI->second > CurDist)
isBelow = true;
if (isBelow) {
if (UDO.isUse())
Uses.push_back(UDMI);
if (UDO.isDef())
Defs.push_back(UDMI);
}
}
if (Uses.empty())
// No uses below.
return false;
else if (!Uses.empty() && Defs.empty())
// There are uses below but no defs below.
return true;
// There are both uses and defs below. We need to know which comes first.
if (!hasDistInfo) {
// Complete DistanceMap for this MBB. This information is computed only
// once per MBB.
++I;
++CurDist;
for (MachineBasicBlock::iterator E = MBB->end(); I != E; ++I, ++CurDist)
DistanceMap.insert(std::make_pair(I, CurDist));
}
unsigned EarliestUse = DistanceMap[Uses[0]];
for (unsigned i = 1, e = Uses.size(); i != e; ++i) {
unsigned Dist = DistanceMap[Uses[i]];
if (Dist < EarliestUse)
EarliestUse = Dist;
}
for (unsigned i = 0, e = Defs.size(); i != e; ++i) {
unsigned Dist = DistanceMap[Defs[i]];
if (Dist < EarliestUse)
// The register is defined before its first use below.
return false;
}
return true;
}
void ConnectedVNInfoEqClasses::Distribute(LiveInterval &LI, LiveInterval *LIV[],
MachineRegisterInfo &MRI) {
// Rewrite instructions.
for (MachineRegisterInfo::reg_iterator RI = MRI.reg_begin(LI.reg),
RE = MRI.reg_end(); RI != RE;) {
MachineOperand &MO = *RI;
MachineInstr *MI = RI->getParent();
++RI;
// DBG_VALUE instructions don't have slot indexes, so get the index of the
// instruction before them.
// Normally, DBG_VALUE instructions are removed before this function is
// called, but it is not a requirement.
SlotIndex Idx;
if (MI->isDebugValue())
Idx = LIS.getSlotIndexes()->getIndexBefore(*MI);
else
Idx = LIS.getInstructionIndex(*MI);
LiveQueryResult LRQ = LI.Query(Idx);
const VNInfo *VNI = MO.readsReg() ? LRQ.valueIn() : LRQ.valueDefined();
// In the case of an <undef> use that isn't tied to any def, VNI will be
// NULL. If the use is tied to a def, VNI will be the defined value.
if (!VNI)
continue;
if (unsigned EqClass = getEqClass(VNI))
MO.setReg(LIV[EqClass-1]->reg);
}
// Distribute subregister liveranges.
if (LI.hasSubRanges()) {
unsigned NumComponents = EqClass.getNumClasses();
SmallVector<unsigned, 8> VNIMapping;
SmallVector<LiveInterval::SubRange*, 8> SubRanges;
BumpPtrAllocator &Allocator = LIS.getVNInfoAllocator();
for (LiveInterval::SubRange &SR : LI.subranges()) {
// Create new subranges in the split intervals and construct a mapping
// for the VNInfos in the subrange.
unsigned NumValNos = SR.valnos.size();
VNIMapping.clear();
VNIMapping.reserve(NumValNos);
SubRanges.clear();
SubRanges.resize(NumComponents-1, nullptr);
for (unsigned I = 0; I < NumValNos; ++I) {
const VNInfo &VNI = *SR.valnos[I];
unsigned ComponentNum;
if (VNI.isUnused()) {
ComponentNum = 0;
} else {
const VNInfo *MainRangeVNI = LI.getVNInfoAt(VNI.def);
assert(MainRangeVNI != nullptr
&& "SubRange def must have corresponding main range def");
ComponentNum = getEqClass(MainRangeVNI);
if (ComponentNum > 0 && SubRanges[ComponentNum-1] == nullptr) {
SubRanges[ComponentNum-1]
= LIV[ComponentNum-1]->createSubRange(Allocator, SR.LaneMask);
}
}
VNIMapping.push_back(ComponentNum);
}
DistributeRange(SR, SubRanges.data(), VNIMapping);
}
LI.removeEmptySubRanges();
}
// Distribute main liverange.
DistributeRange(LI, LIV, EqClass);
}
/// getTripCount - Return a loop-invariant LLVM value indicating the
/// number of times the loop will be executed. The trip count can
/// be either a register or a constant value. If the trip-count
/// cannot be determined, this returns null.
///
/// We find the trip count from the phi instruction that defines the
/// induction variable. We follow the links to the CMP instruction
/// to get the trip count.
///
/// Based upon getTripCount in LoopInfo.
///
CountValue *PPCCTRLoops::getTripCount(MachineLoop *L,
SmallVector<MachineInstr *, 2> &OldInsts) const {
MachineBasicBlock *LastMBB = L->getExitingBlock();
// Don't generate a CTR loop if the loop has more than one exit.
if (LastMBB == 0)
return 0;
MachineBasicBlock::iterator LastI = LastMBB->getFirstTerminator();
if (LastI->getOpcode() != PPC::BCC)
return 0;
// We need to make sure that this compare is defining the condition
// register actually used by the terminating branch.
unsigned PredReg = LastI->getOperand(1).getReg();
DEBUG(dbgs() << "Examining loop with first terminator: " << *LastI);
unsigned PredCond = LastI->getOperand(0).getImm();
if (PredCond != PPC::PRED_EQ && PredCond != PPC::PRED_NE)
return 0;
// Check that the loop has a induction variable.
SmallVector<MachineInstr *, 4> IVars, IOps;
getCanonicalInductionVariable(L, IVars, IOps);
for (unsigned i = 0; i < IVars.size(); ++i) {
MachineInstr *IOp = IOps[i];
MachineInstr *IV_Inst = IVars[i];
// Canonical loops will end with a 'cmpwi/cmpdi cr, IV, Imm',
// if Imm is 0, get the count from the PHI opnd
// if Imm is -M, than M is the count
// Otherwise, Imm is the count
MachineOperand *IV_Opnd;
const MachineOperand *InitialValue;
if (!L->contains(IV_Inst->getOperand(2).getMBB())) {
InitialValue = &IV_Inst->getOperand(1);
IV_Opnd = &IV_Inst->getOperand(3);
} else {
InitialValue = &IV_Inst->getOperand(3);
IV_Opnd = &IV_Inst->getOperand(1);
}
DEBUG(dbgs() << "Considering:\n");
DEBUG(dbgs() << " induction operation: " << *IOp);
DEBUG(dbgs() << " induction variable: " << *IV_Inst);
DEBUG(dbgs() << " initial value: " << *InitialValue << "\n");
// Look for the cmp instruction to determine if we
// can get a useful trip count. The trip count can
// be either a register or an immediate. The location
// of the value depends upon the type (reg or imm).
for (MachineRegisterInfo::reg_iterator
RI = MRI->reg_begin(IV_Opnd->getReg()), RE = MRI->reg_end();
RI != RE; ++RI) {
IV_Opnd = &RI.getOperand();
bool SignedCmp, Int64Cmp;
MachineInstr *MI = IV_Opnd->getParent();
if (L->contains(MI) && isCompareEqualsImm(MI, SignedCmp, Int64Cmp) &&
MI->getOperand(0).getReg() == PredReg) {
OldInsts.push_back(MI);
OldInsts.push_back(IOp);
DEBUG(dbgs() << " compare: " << *MI);
const MachineOperand &MO = MI->getOperand(2);
assert(MO.isImm() && "IV Cmp Operand should be an immediate");
int64_t ImmVal;
if (SignedCmp)
ImmVal = (short) MO.getImm();
else
ImmVal = MO.getImm();
const MachineInstr *IV_DefInstr = MRI->getVRegDef(IV_Opnd->getReg());
assert(L->contains(IV_DefInstr->getParent()) &&
"IV definition should occurs in loop");
int64_t iv_value = (short) IV_DefInstr->getOperand(2).getImm();
assert(InitialValue->isReg() && "Expecting register for init value");
unsigned InitialValueReg = InitialValue->getReg();
MachineInstr *DefInstr = MRI->getVRegDef(InitialValueReg);
// Here we need to look for an immediate load (an li or lis/ori pair).
if (DefInstr && (DefInstr->getOpcode() == PPC::ORI8 ||
DefInstr->getOpcode() == PPC::ORI)) {
int64_t start = DefInstr->getOperand(2).getImm();
MachineInstr *DefInstr2 =
MRI->getVRegDef(DefInstr->getOperand(1).getReg());
if (DefInstr2 && (DefInstr2->getOpcode() == PPC::LIS8 ||
DefInstr2->getOpcode() == PPC::LIS)) {
DEBUG(dbgs() << " initial constant: " << *DefInstr);
DEBUG(dbgs() << " initial constant: " << *DefInstr2);
start |= int64_t(short(DefInstr2->getOperand(1).getImm())) << 16;
int64_t count = ImmVal - start;
if ((count % iv_value) != 0) {
return 0;
}
OldInsts.push_back(DefInstr);
OldInsts.push_back(DefInstr2);
// count/iv_value, the trip count, should be positive here. If it
// is negative, that indicates that the counter will wrap.
if (Int64Cmp)
return new CountValue(count/iv_value);
else
return new CountValue(uint32_t(count/iv_value));
}
} else if (DefInstr && (DefInstr->getOpcode() == PPC::LI8 ||
DefInstr->getOpcode() == PPC::LI)) {
DEBUG(dbgs() << " initial constant: " << *DefInstr);
int64_t count = ImmVal -
int64_t(short(DefInstr->getOperand(1).getImm()));
if ((count % iv_value) != 0) {
return 0;
}
OldInsts.push_back(DefInstr);
if (Int64Cmp)
return new CountValue(count/iv_value);
else
return new CountValue(uint32_t(count/iv_value));
} else if (iv_value == 1 || iv_value == -1) {
// We can't determine a constant starting value.
if (ImmVal == 0) {
return new CountValue(InitialValueReg, iv_value > 0);
}
// FIXME: handle non-zero end value.
}
// FIXME: handle non-unit increments (we might not want to introduce
// division but we can handle some 2^n cases with shifts).
}
}
}
return 0;
}
void VirtRegAuxInfo::CalculateWeightAndHint(LiveInterval &li) {
MachineRegisterInfo &mri = MF.getRegInfo();
const TargetRegisterInfo &tri = *MF.getTarget().getRegisterInfo();
MachineBasicBlock *mbb = 0;
MachineLoop *loop = 0;
unsigned loopDepth = 0;
bool isExiting = false;
float totalWeight = 0;
SmallPtrSet<MachineInstr*, 8> visited;
// Find the best physreg hist and the best virtreg hint.
float bestPhys = 0, bestVirt = 0;
unsigned hintPhys = 0, hintVirt = 0;
// Don't recompute a target specific hint.
bool noHint = mri.getRegAllocationHint(li.reg).first != 0;
// Don't recompute spill weight for an unspillable register.
bool Spillable = li.isSpillable();
for (MachineRegisterInfo::reg_iterator I = mri.reg_begin(li.reg);
MachineInstr *mi = I.skipInstruction();) {
if (mi->isIdentityCopy() || mi->isImplicitDef() || mi->isDebugValue())
continue;
if (!visited.insert(mi))
continue;
float weight = 1.0f;
if (Spillable) {
// Get loop info for mi.
if (mi->getParent() != mbb) {
mbb = mi->getParent();
loop = Loops.getLoopFor(mbb);
loopDepth = loop ? loop->getLoopDepth() : 0;
isExiting = loop ? loop->isLoopExiting(mbb) : false;
}
// Calculate instr weight.
bool reads, writes;
tie(reads, writes) = mi->readsWritesVirtualRegister(li.reg);
weight = LiveIntervals::getSpillWeight(writes, reads, loopDepth);
// Give extra weight to what looks like a loop induction variable update.
if (writes && isExiting && LIS.isLiveOutOfMBB(li, mbb))
weight *= 3;
totalWeight += weight;
}
// Get allocation hints from copies.
if (noHint || !mi->isCopy())
continue;
unsigned hint = copyHint(mi, li.reg, tri, mri);
if (!hint)
continue;
float hweight = Hint[hint] += weight;
if (TargetRegisterInfo::isPhysicalRegister(hint)) {
if (hweight > bestPhys && mri.isAllocatable(hint))
bestPhys = hweight, hintPhys = hint;
} else {
if (hweight > bestVirt)
bestVirt = hweight, hintVirt = hint;
}
}
Hint.clear();
// Always prefer the physreg hint.
if (unsigned hint = hintPhys ? hintPhys : hintVirt) {
mri.setRegAllocationHint(li.reg, 0, hint);
// Weakly boost the spill weight of hinted registers.
totalWeight *= 1.01F;
}
// If the live interval was already unspillable, leave it that way.
if (!Spillable)
return;
// Mark li as unspillable if all live ranges are tiny.
if (li.isZeroLength(LIS.getSlotIndexes())) {
li.markNotSpillable();
return;
}
// If all of the definitions of the interval are re-materializable,
// it is a preferred candidate for spilling.
// FIXME: this gets much more complicated once we support non-trivial
// re-materialization.
if (isRematerializable(li, LIS, *MF.getTarget().getInstrInfo()))
totalWeight *= 0.5F;
li.weight = normalizeSpillWeight(totalWeight, li.getSize());
}
/// spillAroundUses - insert spill code around each use of Reg.
void InlineSpiller::spillAroundUses(unsigned Reg) {
DEBUG(dbgs() << "spillAroundUses " << PrintReg(Reg) << '\n');
LiveInterval &OldLI = LIS.getInterval(Reg);
// Iterate over instructions using Reg.
for (MachineRegisterInfo::reg_iterator RegI = MRI.reg_begin(Reg);
MachineInstr *MI = RegI.skipBundle();) {
// Debug values are not allowed to affect codegen.
if (MI->isDebugValue()) {
// Modify DBG_VALUE now that the value is in a spill slot.
uint64_t Offset = MI->getOperand(1).getImm();
const MDNode *MDPtr = MI->getOperand(2).getMetadata();
DebugLoc DL = MI->getDebugLoc();
if (MachineInstr *NewDV = TII.emitFrameIndexDebugValue(MF, StackSlot,
Offset, MDPtr, DL)) {
DEBUG(dbgs() << "Modifying debug info due to spill:" << "\t" << *MI);
MachineBasicBlock *MBB = MI->getParent();
MBB->insert(MBB->erase(MI), NewDV);
} else {
DEBUG(dbgs() << "Removing debug info due to spill:" << "\t" << *MI);
MI->eraseFromParent();
}
continue;
}
// Ignore copies to/from snippets. We'll delete them.
if (SnippetCopies.count(MI))
continue;
// Stack slot accesses may coalesce away.
if (coalesceStackAccess(MI, Reg))
continue;
// Analyze instruction.
SmallVector<std::pair<MachineInstr*, unsigned>, 8> Ops;
MIBundleOperands::VirtRegInfo RI =
MIBundleOperands(MI).analyzeVirtReg(Reg, &Ops);
// Find the slot index where this instruction reads and writes OldLI.
// This is usually the def slot, except for tied early clobbers.
SlotIndex Idx = LIS.getInstructionIndex(MI).getRegSlot();
if (VNInfo *VNI = OldLI.getVNInfoAt(Idx.getRegSlot(true)))
if (SlotIndex::isSameInstr(Idx, VNI->def))
Idx = VNI->def;
// Check for a sibling copy.
unsigned SibReg = isFullCopyOf(MI, Reg);
if (SibReg && isSibling(SibReg)) {
// This may actually be a copy between snippets.
if (isRegToSpill(SibReg)) {
DEBUG(dbgs() << "Found new snippet copy: " << *MI);
SnippetCopies.insert(MI);
continue;
}
if (RI.Writes) {
// Hoist the spill of a sib-reg copy.
if (hoistSpill(OldLI, MI)) {
// This COPY is now dead, the value is already in the stack slot.
MI->getOperand(0).setIsDead();
DeadDefs.push_back(MI);
continue;
}
} else {
// This is a reload for a sib-reg copy. Drop spills downstream.
LiveInterval &SibLI = LIS.getInterval(SibReg);
eliminateRedundantSpills(SibLI, SibLI.getVNInfoAt(Idx));
// The COPY will fold to a reload below.
}
}
// Attempt to fold memory ops.
if (foldMemoryOperand(Ops))
continue;
// Allocate interval around instruction.
// FIXME: Infer regclass from instruction alone.
LiveInterval &NewLI = Edit->createFrom(Reg);
NewLI.markNotSpillable();
if (RI.Reads)
insertReload(NewLI, Idx, MI);
// Rewrite instruction operands.
bool hasLiveDef = false;
for (unsigned i = 0, e = Ops.size(); i != e; ++i) {
MachineOperand &MO = Ops[i].first->getOperand(Ops[i].second);
MO.setReg(NewLI.reg);
if (MO.isUse()) {
if (!Ops[i].first->isRegTiedToDefOperand(Ops[i].second))
MO.setIsKill();
} else {
if (!MO.isDead())
hasLiveDef = true;
}
}
DEBUG(dbgs() << "\trewrite: " << Idx << '\t' << *MI);
// FIXME: Use a second vreg if instruction has no tied ops.
if (RI.Writes) {
if (hasLiveDef)
insertSpill(NewLI, OldLI, Idx, MI);
else {
// This instruction defines a dead value. We don't need to spill it,
// but do create a live range for the dead value.
VNInfo *VNI = NewLI.getNextValue(Idx, LIS.getVNInfoAllocator());
NewLI.addRange(LiveRange(Idx, Idx.getDeadSlot(), VNI));
}
}
DEBUG(dbgs() << "\tinterval: " << NewLI << '\n');
}
}
// Top-level driver to manage the queue of unassigned VirtRegs and call the
// selectOrSplit implementation.
void RegAllocBase::allocatePhysRegs() {
seedLiveRegs();
// Continue assigning vregs one at a time to available physical registers.
while (LiveInterval *VirtReg = dequeue()) {
assert(!VRM->hasPhys(VirtReg->reg) && "Register already assigned");
// Unused registers can appear when the spiller coalesces snippets.
if (MRI->reg_nodbg_empty(VirtReg->reg)) {
DEBUG(dbgs() << "Dropping unused " << *VirtReg << '\n');
LIS->removeInterval(VirtReg->reg);
continue;
}
// Invalidate all interference queries, live ranges could have changed.
invalidateVirtRegs();
// selectOrSplit requests the allocator to return an available physical
// register if possible and populate a list of new live intervals that
// result from splitting.
DEBUG(dbgs() << "\nselectOrSplit "
<< MRI->getRegClass(VirtReg->reg)->getName()
<< ':' << *VirtReg << '\n');
typedef SmallVector<LiveInterval*, 4> VirtRegVec;
VirtRegVec SplitVRegs;
unsigned AvailablePhysReg = selectOrSplit(*VirtReg, SplitVRegs);
if (AvailablePhysReg == ~0u) {
// selectOrSplit failed to find a register!
const char *Msg = "ran out of registers during register allocation";
// Probably caused by an inline asm.
MachineInstr *MI;
for (MachineRegisterInfo::reg_iterator I = MRI->reg_begin(VirtReg->reg);
(MI = I.skipInstruction());)
if (MI->isInlineAsm())
break;
if (MI)
MI->emitError(Msg);
else
report_fatal_error(Msg);
// Keep going after reporting the error.
VRM->assignVirt2Phys(VirtReg->reg,
RegClassInfo.getOrder(MRI->getRegClass(VirtReg->reg)).front());
continue;
}
if (AvailablePhysReg)
assign(*VirtReg, AvailablePhysReg);
for (VirtRegVec::iterator I = SplitVRegs.begin(), E = SplitVRegs.end();
I != E; ++I) {
LiveInterval *SplitVirtReg = *I;
assert(!VRM->hasPhys(SplitVirtReg->reg) && "Register already assigned");
if (MRI->reg_nodbg_empty(SplitVirtReg->reg)) {
DEBUG(dbgs() << "not queueing unused " << *SplitVirtReg << '\n');
LIS->removeInterval(SplitVirtReg->reg);
continue;
}
DEBUG(dbgs() << "queuing new interval: " << *SplitVirtReg << "\n");
assert(TargetRegisterInfo::isVirtualRegister(SplitVirtReg->reg) &&
"expect split value in virtual register");
enqueue(SplitVirtReg);
++NumNewQueued;
}
}
}
// Top-level driver to manage the queue of unassigned VirtRegs and call the
// selectOrSplit implementation.
void RegAllocBase::allocatePhysRegs() {
seedLiveRegs();
// Continue assigning vregs one at a time to available physical registers.
while (LiveInterval *VirtReg = dequeue()) {
assert(!VRM->hasPhys(VirtReg->reg) && "Register already assigned");
// Unused registers can appear when the spiller coalesces snippets.
if (MRI->reg_nodbg_empty(VirtReg->reg)) {
DEBUG(dbgs() << "Dropping unused " << *VirtReg << '\n');
LIS->removeInterval(VirtReg->reg);
continue;
}
// Invalidate all interference queries, live ranges could have changed.
invalidateVirtRegs();
// selectOrSplit requests the allocator to return an available physical
// register if possible and populate a list of new live intervals that
// result from splitting.
DEBUG(dbgs() << "\nselectOrSplit "
<< MRI->getRegClass(VirtReg->reg)->getName()
<< ':' << *VirtReg << '\n');
typedef SmallVector<LiveInterval*, 4> VirtRegVec;
VirtRegVec SplitVRegs;
unsigned AvailablePhysReg = selectOrSplit(*VirtReg, SplitVRegs);
if (AvailablePhysReg == ~0u) {
// selectOrSplit failed to find a register!
std::string msg;
raw_string_ostream Msg(msg);
Msg << "Ran out of registers during register allocation!"
"\nCannot allocate: " << *VirtReg;
for (MachineRegisterInfo::reg_iterator I = MRI->reg_begin(VirtReg->reg);
MachineInstr *MI = I.skipInstruction();) {
if (!MI->isInlineAsm())
continue;
Msg << "\nPlease check your inline asm statement for "
"invalid constraints:\n";
MI->print(Msg, &VRM->getMachineFunction().getTarget());
}
report_fatal_error(Msg.str());
}
if (AvailablePhysReg)
assign(*VirtReg, AvailablePhysReg);
for (VirtRegVec::iterator I = SplitVRegs.begin(), E = SplitVRegs.end();
I != E; ++I) {
LiveInterval *SplitVirtReg = *I;
assert(!VRM->hasPhys(SplitVirtReg->reg) && "Register already assigned");
if (MRI->reg_nodbg_empty(SplitVirtReg->reg)) {
DEBUG(dbgs() << "not queueing unused " << *SplitVirtReg << '\n');
LIS->removeInterval(SplitVirtReg->reg);
continue;
}
DEBUG(dbgs() << "queuing new interval: " << *SplitVirtReg << "\n");
assert(TargetRegisterInfo::isVirtualRegister(SplitVirtReg->reg) &&
"expect split value in virtual register");
enqueue(SplitVirtReg);
++NumNewQueued;
}
}
}
void InlineSpiller::spill(LiveInterval *li,
SmallVectorImpl<LiveInterval*> &newIntervals,
SmallVectorImpl<LiveInterval*> &spillIs) {
DEBUG(dbgs() << "Inline spilling " << *li << "\n");
assert(li->isSpillable() && "Attempting to spill already spilled value.");
assert(!li->isStackSlot() && "Trying to spill a stack slot.");
li_ = li;
newIntervals_ = &newIntervals;
rc_ = mri_.getRegClass(li->reg);
spillIs_ = &spillIs;
if (split())
return;
reMaterializeAll();
// Remat may handle everything.
if (li_->empty())
return;
stackSlot_ = vrm_.getStackSlot(li->reg);
if (stackSlot_ == VirtRegMap::NO_STACK_SLOT)
stackSlot_ = vrm_.assignVirt2StackSlot(li->reg);
// Iterate over instructions using register.
for (MachineRegisterInfo::reg_iterator RI = mri_.reg_begin(li->reg);
MachineInstr *MI = RI.skipInstruction();) {
// Debug values are not allowed to affect codegen.
if (MI->isDebugValue()) {
// Modify DBG_VALUE now that the value is in a spill slot.
uint64_t Offset = MI->getOperand(1).getImm();
const MDNode *MDPtr = MI->getOperand(2).getMetadata();
DebugLoc DL = MI->getDebugLoc();
if (MachineInstr *NewDV = tii_.emitFrameIndexDebugValue(mf_, stackSlot_,
Offset, MDPtr, DL)) {
DEBUG(dbgs() << "Modifying debug info due to spill:" << "\t" << *MI);
MachineBasicBlock *MBB = MI->getParent();
MBB->insert(MBB->erase(MI), NewDV);
} else {
DEBUG(dbgs() << "Removing debug info due to spill:" << "\t" << *MI);
MI->eraseFromParent();
}
continue;
}
// Stack slot accesses may coalesce away.
if (coalesceStackAccess(MI))
continue;
// Analyze instruction.
bool Reads, Writes;
SmallVector<unsigned, 8> Ops;
tie(Reads, Writes) = MI->readsWritesVirtualRegister(li->reg, &Ops);
// Attempt to fold memory ops.
if (foldMemoryOperand(MI, Ops))
continue;
// Allocate interval around instruction.
// FIXME: Infer regclass from instruction alone.
unsigned NewVReg = mri_.createVirtualRegister(rc_);
vrm_.grow();
LiveInterval &NewLI = lis_.getOrCreateInterval(NewVReg);
NewLI.markNotSpillable();
if (Reads)
insertReload(NewLI, MI);
// Rewrite instruction operands.
bool hasLiveDef = false;
for (unsigned i = 0, e = Ops.size(); i != e; ++i) {
MachineOperand &MO = MI->getOperand(Ops[i]);
MO.setReg(NewVReg);
if (MO.isUse()) {
if (!MI->isRegTiedToDefOperand(Ops[i]))
MO.setIsKill();
} else {
if (!MO.isDead())
hasLiveDef = true;
}
}
// FIXME: Use a second vreg if instruction has no tied ops.
if (Writes && hasLiveDef)
insertSpill(NewLI, MI);
DEBUG(dbgs() << "\tinterval: " << NewLI << '\n');
newIntervals.push_back(&NewLI);
}
}