ProjectExplorer::IOutputParser *SymbianQtVersion::createOutputParser() const
{
    if (isBuildWithSymbianSbsV2()) {
        return new SbsV2Parser;
    } else {
        ProjectExplorer::IOutputParser *parser = new AbldParser;
        parser->appendOutputParser(new ProjectExplorer::GnuMakeParser);
        return parser;
    }
}
ProjectExplorer::IOutputParser *CMakeBuildConfiguration::createOutputParser() const
{
    ProjectExplorer::IOutputParser *parserchain = new ProjectExplorer::GnuMakeParser;

    int versionId = QtSupport::QtKitInformation::qtVersionId(target()->kit());
    if (versionId >= 0)
        parserchain->appendOutputParser(new QtSupport::QtParser);

    ProjectExplorer::ToolChain *tc = ProjectExplorer::ToolChainKitInformation::toolChain(target()->kit());
    if (tc)
        parserchain->appendOutputParser(tc->outputParser());
    return parserchain;
}
Exemple #3
0
bool MakeStep::init()
{
    Qt4BuildConfiguration *bc = qt4BuildConfiguration();

    m_tasks.clear();
    if (!bc->toolChain()) {
        m_tasks.append(ProjectExplorer::Task(ProjectExplorer::Task::Error,
                                             tr("Qt Creator needs a tool chain set up to build. Please configure a tool chain in Project mode."),
                                             QString(), -1,
                                             QLatin1String(ProjectExplorer::Constants::TASK_CATEGORY_BUILDSYSTEM)));
    }

    ProjectExplorer::ProcessParameters *pp = processParameters();
    pp->setMacroExpander(bc->macroExpander());

    Utils::Environment environment = bc->environment();
    pp->setEnvironment(environment);

    QString workingDirectory;
    if (bc->subNodeBuild())
        workingDirectory = bc->subNodeBuild()->buildDir();
    else
        workingDirectory = bc->buildDirectory();
    pp->setWorkingDirectory(workingDirectory);

    QString makeCmd = bc->makeCommand();
    if (!m_makeCmd.isEmpty())
        makeCmd = m_makeCmd;
    pp->setCommand(makeCmd);

    // If we are cleaning, then make can fail with a error code, but that doesn't mean
    // we should stop the clean queue
    // That is mostly so that rebuild works on a already clean project
    setIgnoreReturnValue(m_clean);

    QString args;

    ProjectExplorer::ToolChain *toolchain = bc->toolChain();

    if (bc->subNodeBuild()) {
        QString makefile = bc->subNodeBuild()->makefile();
        if(!makefile.isEmpty()) {
            Utils::QtcProcess::addArg(&args, QLatin1String("-f"));
            Utils::QtcProcess::addArg(&args, makefile);
            m_makeFileToCheck = QDir(workingDirectory).filePath(makefile);
        } else {
            m_makeFileToCheck = QDir(workingDirectory).filePath("Makefile");
        }
    } else {
        if (!bc->makefile().isEmpty()) {
            Utils::QtcProcess::addArg(&args, QLatin1String("-f"));
            Utils::QtcProcess::addArg(&args, bc->makefile());
            m_makeFileToCheck = QDir(workingDirectory).filePath(bc->makefile());
        } else {
            m_makeFileToCheck = QDir(workingDirectory).filePath("Makefile");
        }
    }

    Utils::QtcProcess::addArgs(&args, m_userArgs);

    if (!isClean()) {
        if (!bc->defaultMakeTarget().isEmpty())
            Utils::QtcProcess::addArg(&args, bc->defaultMakeTarget());
    }
    // -w option enables "Enter"/"Leaving directory" messages, which we need for detecting the
    // absolute file path
    // FIXME doing this without the user having a way to override this is rather bad
    // so we only do it for unix and if the user didn't override the make command
    // but for now this is the least invasive change
    if (toolchain
            && toolchain->targetAbi().binaryFormat() != ProjectExplorer::Abi::PEFormat
            && m_makeCmd.isEmpty())
        Utils::QtcProcess::addArg(&args, QLatin1String("-w"));

    setEnabled(true);
    pp->setArguments(args);

    ProjectExplorer::IOutputParser *parser = 0;
    if (bc->qtVersion())
        parser = bc->qtVersion()->createOutputParser();
    if (parser)
        parser->appendOutputParser(new QtSupport::QtParser);
    else
        parser = new QtSupport::QtParser;
    if (toolchain)
        parser->appendOutputParser(toolchain->outputParser());

    parser->setWorkingDirectory(workingDirectory);

    setOutputParser(parser);

    return AbstractProcessStep::init();
}
Exemple #4
0
bool MakeStep::init()
{
    Qt4BuildConfiguration *bc = qt4BuildConfiguration();
    if (!bc)
        bc = qobject_cast<Qt4BuildConfiguration *>(target()->activeBuildConfiguration());

    m_tasks.clear();
    if (!bc) {
        m_tasks.append(ProjectExplorer::Task(ProjectExplorer::Task::Error,
                                             tr("Qt Creator needs a build configuration set up to build. Configure a tool chain in Project mode."),
                                             Utils::FileName(), -1,
                                             Core::Id(ProjectExplorer::Constants::TASK_CATEGORY_BUILDSYSTEM)));
        return false;
    }

    ProjectExplorer::ToolChain *tc = ProjectExplorer::ToolChainProfileInformation::toolChain(target()->profile());
    if (!tc) {
        m_tasks.append(ProjectExplorer::Task(ProjectExplorer::Task::Error,
                                             tr("Qt Creator needs a tool chain set up to build. Configure a tool chain the profile options."),
                                             Utils::FileName(), -1,
                                             Core::Id(ProjectExplorer::Constants::TASK_CATEGORY_BUILDSYSTEM)));
        return false;
    }

    ProjectExplorer::ProcessParameters *pp = processParameters();
    pp->setMacroExpander(bc->macroExpander());

    QString workingDirectory;
    if (bc->subNodeBuild())
        workingDirectory = bc->subNodeBuild()->buildDir();
    else
        workingDirectory = bc->buildDirectory();
    pp->setWorkingDirectory(workingDirectory);

    QString makeCmd = tc->makeCommand();
    if (!m_makeCmd.isEmpty())
        makeCmd = m_makeCmd;
    pp->setCommand(makeCmd);

    // If we are cleaning, then make can fail with a error code, but that doesn't mean
    // we should stop the clean queue
    // That is mostly so that rebuild works on a already clean project
    setIgnoreReturnValue(m_clean);

    QString args;

    Qt4ProjectManager::Qt4ProFileNode *subNode = bc->subNodeBuild();
    if (subNode) {
        QString makefile = subNode->makefile();
        if (makefile.isEmpty())
            makefile = QLatin1String("Makefile");
        if (subNode->isDebugAndRelease()) {
            if (bc->buildType() == Qt4BuildConfiguration::Debug)
                makefile += QLatin1String(".Debug");
            else
                makefile += QLatin1String(".Release");
        }
        if (makefile != QLatin1String("Makefile")) {
            Utils::QtcProcess::addArg(&args, QLatin1String("-f"));
            Utils::QtcProcess::addArg(&args, makefile);
        }
        m_makeFileToCheck = QDir(workingDirectory).filePath(makefile);
    } else {
        if (!bc->makefile().isEmpty()) {
            Utils::QtcProcess::addArg(&args, QLatin1String("-f"));
            Utils::QtcProcess::addArg(&args, bc->makefile());
            m_makeFileToCheck = QDir(workingDirectory).filePath(bc->makefile());
        } else {
            m_makeFileToCheck = QDir(workingDirectory).filePath(QLatin1String("Makefile"));
        }
    }

    Utils::QtcProcess::addArgs(&args, m_userArgs);

    if (!isClean()) {
        if (!bc->defaultMakeTarget().isEmpty())
            Utils::QtcProcess::addArg(&args, bc->defaultMakeTarget());
    }

    if (bc->fileNodeBuild() && subNode) {
        QString objectsDir = subNode->objectsDirectory();
        if (objectsDir.isEmpty()) {
            objectsDir = subNode->buildDir(bc);
            if (subNode->isDebugAndRelease()) {
                if (bc->buildType() == Qt4BuildConfiguration::Debug)
                    objectsDir += QLatin1String("/debug");
                else
                    objectsDir += QLatin1String("/release");
            }
        }
        QString relObjectsDir = QDir(pp->workingDirectory()).relativeFilePath(objectsDir);
        if (!relObjectsDir.isEmpty())
            relObjectsDir += QLatin1Char('/');
        QString objectFile = relObjectsDir +
                QFileInfo(bc->fileNodeBuild()->path()).baseName() +
                subNode->objectExtension();
        Utils::QtcProcess::addArg(&args, objectFile);
    }
    Utils::Environment env = bc->environment();
    // Force output to english for the parsers. Do this here and not in the toolchain's
    // addToEnvironment() to not screw up the users run environment.
    env.set(QLatin1String("LC_ALL"), QLatin1String("C"));
    // -w option enables "Enter"/"Leaving directory" messages, which we need for detecting the
    // absolute file path
    // doing this without the user having a way to override this is rather bad
    // so we only do it for unix and if the user didn't override the make command
    // but for now this is the least invasive change
    // We also prepend "L" to the MAKEFLAGS, so that nmake / jom are less verbose
    if (tc && m_makeCmd.isEmpty()) {
        if (tc->targetAbi().binaryFormat() != ProjectExplorer::Abi::PEFormat )
            Utils::QtcProcess::addArg(&args, QLatin1String("-w"));
        if (tc->targetAbi().os() == ProjectExplorer::Abi::WindowsOS
                && tc->targetAbi().osFlavor() != ProjectExplorer::Abi::WindowsMSysFlavor) {
            const QString makeFlags = QLatin1String("MAKEFLAGS");
            env.set(makeFlags, QLatin1Char('L') + env.value(makeFlags));
        }
    }

    pp->setEnvironment(env);
    pp->setArguments(args);

    ProjectExplorer::IOutputParser *parser = 0;
    QtSupport::BaseQtVersion *version = QtSupport::QtProfileInformation::qtVersion(target()->profile());
    if (version)
        parser = version->createOutputParser();
    if (parser)
        parser->appendOutputParser(new QtSupport::QtParser);
    else
        parser = new QtSupport::QtParser;
    if (tc)
        parser->appendOutputParser(tc->outputParser());

    parser->setWorkingDirectory(workingDirectory);

    setOutputParser(parser);

    m_scriptTarget = (static_cast<Qt4Project *>(bc->target()->project())->rootQt4ProjectNode()->projectType() == ScriptTemplate);

    return AbstractProcessStep::init();
}