static void dc_callvm_argFloat_mips_o32(DCCallVM* in_self, DCfloat x)
{
DCCallVM_mips_o32* self = (DCCallVM_mips_o32*)in_self;
dcVecAppend(&self->mVecHead, &x, sizeof(DCfloat) );
if (self->mArgCount < 2) {
#if defined(DC__Endian_LITTLE)
self->mRegData.u[self->mArgCount].f[0] = x;
#else
self->mRegData.u[self->mArgCount].f[1] = x;
#endif
#if 0
self->mRegData.u[self->mArgCount].f[1] = x;
call kernel
mips:
lwc1 $f12, 4($5) <--- byte offset 4
lwc1 $f13, 0($5)
lwc1 $f14, 12($5) <--- byte offset 12
lwc1 $f15, 8($5)
mipsel:
lwc1 $f12, 0($5) <--- byte offset 4
lwc1 $f13, 4($5)
lwc1 $f14, 8($5) <--- byte offset 12
lwc1 $f15, 12($5)
#if defined(DC__Endian_LITTLE)
/* index 0 and 2 */
self->mRegData.floats[self->mArgCount*2] = x;
#else
/* index 1 and 3 */
self->mRegData.floats[self->mArgCount*2+1] = x;
#endif
#endif
}
asm void
bsp_flash_init( void )
{
extern uint32_t _internal_ram_end;
enum { BIUCR = 0xC3F8801Cul };
nofralloc
mflr r7 /**< no stack available here */
lis r5, __set_value@h /**< __set_value fcall - source */
ori r5, r5, __set_value@l
/**< __set_value fcall - dest */
lis r6, _internal_ram_end@h
ori r6, r6, (_internal_ram_end-sizeof(__set_value))@l
/**< unrolled copy */
lwz r4, 0(r5) /**< __set_value[0] */
stw r4, 0(r6)
lwz r4, 4(r5) /**< __set_value[1] */
stw r4, 4(r6)
lwz r4, 8(r5) /**< __set_value[2] */
stw r4, 8(r6)
lwz r4, 12(r5) /**< __set_value[3] */
stw r4, 12(r6)
lis r4, BIUCR@h /**< BIUCR (base) */
ori r4, r4, BIUCR@l /* */
lis r3, 0x0001 /**< 82MHz operation, I+D prefetch*/
ori r3, r3, 0x6B55 /* enabled */
xor r5, r5, r5 /**< BIUCR+0=BIUCR */
mtlr r6 /**< addr of __set_value() */
blrl
lis r3, (3<<14) /**< 3 buf inst, 1 buf data */
li r5, 8 /**< BIUCR+8=BIUCR2 */
mtlr r6 /**< addr of __set_value() */
blrl
xor r3, r3, r3 /**< NO prefetching on Bank1 */
li r5, 12 /**< BIUCR+12=PFCR3 */
mtlr r6 /**< addr of __set_value() */
blrl
mtlr r7
blr
}
void transCALL(FILE *f, WORD p, WORD q)
{
transBase(f,p);
fprintf(f,"\
addi $sp, $sp, -16\n\
sw $s2, 0($sp)\n\
sw $s0, 8($sp)\n\
addi $s0, $sp, 12\n\
addi $sp, $sp, 16\n\
jal label%d\n",q);
}
// Files
void LoadToVRAM(const char* filename, u16 x, u16 y)
{
filename; x; y;
//subRom.SX = (u16)filename;
//subRom.SY = 0;
//subRom.DX = x;
//subRom.DY = y;
//subRom.NX = 0;
//subRom.NY = 0;
//subRom.CLR = 0;
//subRom.ARG = 0;
//subRom.CMD = 0;
#define EXTROM #0x015F
#define BLTVD #0x019D
#define SX #0xF562 // X-coordinate of the source
#define SY #0xF564 // Y-coordinate of the source
#define DX #0xF566 // X-coordinate of the destination
#define DY #0xF568 // Y-coordinate of the destination
#define NX #0xF56A // number of dots in the X direction
#define NY #0xF56C // number of dots in the Y direction
#define CDUMMY #0xF56E // dummy (not required to be set)
#define ARG #0xF56F // selects the direction and expansion RAM (same as VDP R#45)
#define LOGOP #0xF570 // logical operation code (same as the logical operation code of VDP)
__asm
;// Init data
ld l,4(ix)
ld h,5(ix)
ld (SX), hl
ld l,6(ix)
ld h,7(ix)
ld (DX), hl
ld l,8(ix)
ld h,9(ix)
ld (DY), hl
xor a
ld (ARG), a ;// ARG doit toujours être mis à zéro !!!
ld (LOGOP), a ;// Idem LOGOP
;// Call BLTVD function
di
ld hl, #0xF562
ld ix, BLTVD
call EXTROM
ei
__endasm;
}
static void dc_callvm_argFloat_mips_o32(DCCallVM* in_self, DCfloat x)
{
DCCallVM_mips_o32* self = (DCCallVM_mips_o32*)in_self;
dcVecAppend(&self->mVecHead, &x, sizeof(DCfloat));
#if defined(DC__ABI_HARDFLOAT)
if (self->mArgCount < 2) {
/* @@@ unsure if we should zero init, here; seems to work as-is */
# if defined(DC__Endian_LITTLE)
self->mRegData.u[self->mArgCount].f[0] = x;
# else
self->mRegData.u[self->mArgCount].f[1] = x; // floats in regs always right justified
# endif
# if 0
self->mRegData.u[self->mArgCount].f[1] = x;
call kernel
mips:
lwc1 $f12, 4($5) <--- byte offset 4
lwc1 $f13, 0($5)
lwc1 $f14, 12($5) <--- byte offset 12
lwc1 $f15, 8($5)
mipsel:
lwc1 $f12, 0($5) <--- byte offset 4
lwc1 $f13, 4($5)
lwc1 $f14, 8($5) <--- byte offset 12
lwc1 $f15, 12($5)
# if defined(DC__Endian_LITTLE)
/* index 0 and 2 */
self->mRegData.floats[self->mArgCount*2] = x;
# else
/* index 1 and 3 */
self->mRegData.floats[self->mArgCount*2+1] = x;
# endif
# endif
}
}
extern "C" void abort (void);
int glob = 0;
int other ();
extern "C" int stubfn ();
int localfn () { return other (); }
asm void foo(int arg)
{
nofralloc
mflr r0
stmw r30,(-8)(r1)
stw r0,8(r1)
stwu r1,(-80)(r1)
bl stubfn
addi r1,r1,80
lwz r0,8(r1)
lmw r30,(-8)(r1)
mtlr r0
b localfn
}
void bar (int arg)
{
stubfn ();
localfn ();
}
}
// -----------------------------------------------------------------------
// This function handles IRQ's for the P6502 by jumping to the address
// at 0xFFFE.
asm void N6502::_IRQ()
{
lbz r5,_F(r3)
andi. r7,r5,I_FLAG
bnelr
// save regs
stw r24,-4(SP)
stw r25,-8(SP)
stw r27,-12(SP)
lwz r8,_MEM_X(r3)
lbz r6,_SP(r3) // setup regs for _PUSHB macro
lwz r27,RAMSeg1_Ind(r8)
addi r25,r6,0x100
lhz r24,_PC(r3)
li r9,D_FLAG
srwi r7,r24,8 // push pc,flags
li r8,B_FLAG
_pushb (r7)
not r8,r8
not r9,r9
_pushb (r24)