/* Utility routines */
static inline int get_baud(struct bf535_serial *info)
{
unsigned long result = 115200;
unsigned short int baud_lo, baud_hi;
int i, idx = info->hub2;
ACCESS_LATCH(idx) /* change access to divisor latch */
baud_lo = UART_DLL(idx);
baud_hi = UART_DLH(idx);
for (i=0; i<BAUD_TABLE_SIZE ; i++){
if ( baud_lo == hw_baud_table[i].dl_low && baud_hi == hw_baud_table[i].dl_high)
{ result = baud_table[i];
break;
}
}
return result;
}
int serial_getc(void)
{
uint16_t uart_rbr_val;
/* wait for data ! */
while (!serial_tstc())
continue;
/* grab the new byte */
uart_rbr_val = *pUART_RBR;
#ifdef CONFIG_DEBUG_SERIAL
/* grab & clear the LSR */
uint16_t uart_lsr_val = uart_lsr_read();
cached_lsr[cache_count] = uart_lsr_val;
cached_rbr[cache_count] = uart_rbr_val;
cache_count = (cache_count + 1) % ARRAY_SIZE(cached_lsr);
if (uart_lsr_val & (OE|PE|FE|BI)) {
uint16_t dll, dlh;
printf("\n[SERIAL ERROR]\n");
ACCESS_LATCH();
dll = *pUART_DLL;
dlh = *pUART_DLH;
ACCESS_PORT_IER();
printf("\tDLL=0x%x DLH=0x%x\n", dll, dlh);
do {
--cache_count;
printf("\t%3i: RBR=0x%02x LSR=0x%02x\n", cache_count,
cached_rbr[cache_count], cached_lsr[cache_count]);
} while (cache_count > 0);
return -1;
}
#endif
uart_lsr_clear();
return uart_rbr_val;
}
static int uart_getc(uint32_t uart_base)
{
uint16_t uart_rbr_val;
/* wait for data ! */
while (!uart_tstc(uart_base))
continue;
/* grab the new byte */
uart_rbr_val = bfin_read(&pUART->rbr);
#ifdef CONFIG_DEBUG_SERIAL
/* grab & clear the LSR */
uint16_t uart_lsr_val = uart_lsr_read(uart_base);
cached_lsr[cache_count] = uart_lsr_val;
cached_rbr[cache_count] = uart_rbr_val;
cache_count = (cache_count + 1) % ARRAY_SIZE(cached_lsr);
if (uart_lsr_val & (OE|PE|FE|BI)) {
uint16_t dll, dlh;
printf("\n[SERIAL ERROR]\n");
ACCESS_LATCH();
dll = bfin_read(&pUART->dll);
dlh = bfin_read(&pUART->dlh);
ACCESS_PORT_IER();
printf("\tDLL=0x%x DLH=0x%x\n", dll, dlh);
do {
--cache_count;
printf("\t%3zu: RBR=0x%02x LSR=0x%02x\n", cache_count,
cached_rbr[cache_count], cached_lsr[cache_count]);
} while (cache_count > 0);
return -1;
}
#endif
uart_lsr_clear(uart_base);
return uart_rbr_val;
}
