acpi_status
acpi_ex_prep_common_field_object(union acpi_operand_object *obj_desc,
u8 field_flags,
u8 field_attribute,
u32 field_bit_position, u32 field_bit_length)
{
u32 access_bit_width;
u32 byte_alignment;
u32 nearest_byte_address;
ACPI_FUNCTION_TRACE(ex_prep_common_field_object);
obj_desc->common_field.field_flags = field_flags;
obj_desc->common_field.attribute = field_attribute;
obj_desc->common_field.bit_length = field_bit_length;
access_bit_width = acpi_ex_decode_field_access(obj_desc, field_flags,
&byte_alignment);
if (!access_bit_width) {
return_ACPI_STATUS(AE_AML_OPERAND_VALUE);
}
obj_desc->common_field.access_byte_width = (u8)
ACPI_DIV_8(access_bit_width);
obj_desc->common_field.access_bit_width = (u8) access_bit_width;
nearest_byte_address =
ACPI_ROUND_BITS_DOWN_TO_BYTES(field_bit_position);
obj_desc->common_field.base_byte_offset = (u32)
ACPI_ROUND_DOWN(nearest_byte_address, byte_alignment);
obj_desc->common_field.start_field_bit_offset = (u8)
(field_bit_position -
ACPI_MUL_8(obj_desc->common_field.base_byte_offset));
if ((obj_desc->common_field.start_field_bit_offset +
field_bit_length) <= (u16) access_bit_width) {
obj_desc->common.flags |= AOPOBJ_SINGLE_DATUM;
}
return_ACPI_STATUS(AE_OK);
}
static u32
acpi_ex_generate_access(u32 field_bit_offset,
u32 field_bit_length, u32 region_length)
{
u32 field_byte_length;
u32 field_byte_offset;
u32 field_byte_end_offset;
u32 access_byte_width;
u32 field_start_offset;
u32 field_end_offset;
u32 minimum_access_width = 0xFFFFFFFF;
u32 minimum_accesses = 0xFFFFFFFF;
u32 accesses;
ACPI_FUNCTION_TRACE(ex_generate_access);
/* Round Field start offset and length to "minimal" byte boundaries */
field_byte_offset = ACPI_DIV_8(ACPI_ROUND_DOWN(field_bit_offset, 8));
field_byte_end_offset = ACPI_DIV_8(ACPI_ROUND_UP(field_bit_length +
field_bit_offset, 8));
field_byte_length = field_byte_end_offset - field_byte_offset;
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
"Bit length %u, Bit offset %u\n",
field_bit_length, field_bit_offset));
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
"Byte Length %u, Byte Offset %u, End Offset %u\n",
field_byte_length, field_byte_offset,
field_byte_end_offset));
/*
* Iterative search for the maximum access width that is both aligned
* and does not go beyond the end of the region
*
* Start at byte_acc and work upwards to qword_acc max. (1,2,4,8 bytes)
*/
for (access_byte_width = 1; access_byte_width <= 8;
access_byte_width <<= 1) {
/*
* 1) Round end offset up to next access boundary and make sure that
* this does not go beyond the end of the parent region.
* 2) When the Access width is greater than the field_byte_length, we
* are done. (This does not optimize for the perfectly aligned
* case yet).
*/
if (ACPI_ROUND_UP(field_byte_end_offset, access_byte_width) <=
region_length) {
field_start_offset =
ACPI_ROUND_DOWN(field_byte_offset,
access_byte_width) /
access_byte_width;
field_end_offset =
ACPI_ROUND_UP((field_byte_length +
field_byte_offset),
access_byte_width) /
access_byte_width;
accesses = field_end_offset - field_start_offset;
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
"AccessWidth %u end is within region\n",
access_byte_width));
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
"Field Start %u, Field End %u -- requires %u accesses\n",
field_start_offset, field_end_offset,
accesses));
/* Single access is optimal */
if (accesses <= 1) {
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
"Entire field can be accessed with one operation of size %u\n",
access_byte_width));
return_VALUE(access_byte_width);
}
/*
* Fits in the region, but requires more than one read/write.
* try the next wider access on next iteration
*/
if (accesses < minimum_accesses) {
minimum_accesses = accesses;
minimum_access_width = access_byte_width;
}
} else {
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
"AccessWidth %u end is NOT within region\n",
access_byte_width));
if (access_byte_width == 1) {
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
"Field goes beyond end-of-region!\n"));
/* Field does not fit in the region at all */
return_VALUE(0);
}
/*
* This width goes beyond the end-of-region, back off to
* previous access
*/
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
"Backing off to previous optimal access width of %u\n",
minimum_access_width));
return_VALUE(minimum_access_width);
}
}
/*
* Could not read/write field with one operation,
* just use max access width
*/
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
"Cannot access field in one operation, using width 8\n"));
return_VALUE(8);
}
acpi_status acpi_ex_prep_field_value(struct acpi_create_field_info *info)
{
union acpi_operand_object *obj_desc;
union acpi_operand_object *second_desc = NULL;
u32 type;
acpi_status status;
ACPI_FUNCTION_TRACE(ex_prep_field_value);
/* Parameter validation */
if (info->field_type != ACPI_TYPE_LOCAL_INDEX_FIELD) {
if (!info->region_node) {
ACPI_ERROR((AE_INFO, "Null RegionNode"));
return_ACPI_STATUS(AE_AML_NO_OPERAND);
}
type = acpi_ns_get_type(info->region_node);
if (type != ACPI_TYPE_REGION) {
ACPI_ERROR((AE_INFO,
"Needed Region, found type 0x%X (%s)",
type, acpi_ut_get_type_name(type)));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
}
/* Allocate a new field object */
obj_desc = acpi_ut_create_internal_object(info->field_type);
if (!obj_desc) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
/* Initialize areas of the object that are common to all fields */
obj_desc->common_field.node = info->field_node;
status = acpi_ex_prep_common_field_object(obj_desc, info->field_flags,
info->attribute,
info->field_bit_position,
info->field_bit_length);
if (ACPI_FAILURE(status)) {
acpi_ut_delete_object_desc(obj_desc);
return_ACPI_STATUS(status);
}
/* Initialize areas of the object that are specific to the field type */
switch (info->field_type) {
case ACPI_TYPE_LOCAL_REGION_FIELD:
obj_desc->field.region_obj =
acpi_ns_get_attached_object(info->region_node);
/* An additional reference for the container */
acpi_ut_add_reference(obj_desc->field.region_obj);
/* allow full data read from EC address space */
if (obj_desc->field.region_obj->region.space_id ==
ACPI_ADR_SPACE_EC) {
if (obj_desc->common_field.bit_length > 8) {
unsigned width =
ACPI_ROUND_BITS_UP_TO_BYTES(
obj_desc->common_field.bit_length);
// access_bit_width is u8, don't overflow it
if (width > 8)
width = 8;
obj_desc->common_field.access_byte_width =
width;
obj_desc->common_field.access_bit_width =
8 * width;
}
}
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
"RegionField: BitOff %X, Off %X, Gran %X, Region %p\n",
obj_desc->field.start_field_bit_offset,
obj_desc->field.base_byte_offset,
obj_desc->field.access_byte_width,
obj_desc->field.region_obj));
break;
case ACPI_TYPE_LOCAL_BANK_FIELD:
obj_desc->bank_field.value = info->bank_value;
obj_desc->bank_field.region_obj =
acpi_ns_get_attached_object(info->region_node);
obj_desc->bank_field.bank_obj =
acpi_ns_get_attached_object(info->register_node);
/* An additional reference for the attached objects */
acpi_ut_add_reference(obj_desc->bank_field.region_obj);
acpi_ut_add_reference(obj_desc->bank_field.bank_obj);
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
"Bank Field: BitOff %X, Off %X, Gran %X, Region %p, BankReg %p\n",
obj_desc->bank_field.start_field_bit_offset,
obj_desc->bank_field.base_byte_offset,
obj_desc->field.access_byte_width,
obj_desc->bank_field.region_obj,
obj_desc->bank_field.bank_obj));
/*
* Remember location in AML stream of the field unit
* opcode and operands -- since the bank_value
* operands must be evaluated.
*/
second_desc = obj_desc->common.next_object;
second_desc->extra.aml_start =
ACPI_CAST_PTR(union acpi_parse_object,
info->data_register_node)->named.data;
second_desc->extra.aml_length =
ACPI_CAST_PTR(union acpi_parse_object,
info->data_register_node)->named.length;
break;
case ACPI_TYPE_LOCAL_INDEX_FIELD:
/* Get the Index and Data registers */
obj_desc->index_field.index_obj =
acpi_ns_get_attached_object(info->register_node);
obj_desc->index_field.data_obj =
acpi_ns_get_attached_object(info->data_register_node);
if (!obj_desc->index_field.data_obj
|| !obj_desc->index_field.index_obj) {
ACPI_ERROR((AE_INFO,
"Null Index Object during field prep"));
acpi_ut_delete_object_desc(obj_desc);
return_ACPI_STATUS(AE_AML_INTERNAL);
}
/* An additional reference for the attached objects */
acpi_ut_add_reference(obj_desc->index_field.data_obj);
acpi_ut_add_reference(obj_desc->index_field.index_obj);
/*
* April 2006: Changed to match MS behavior
*
* The value written to the Index register is the byte offset of the
* target field in units of the granularity of the index_field
*
* Previously, the value was calculated as an index in terms of the
* width of the Data register, as below:
*
* obj_desc->index_field.Value = (u32)
* (Info->field_bit_position / ACPI_MUL_8 (
* obj_desc->Field.access_byte_width));
*
* February 2006: Tried value as a byte offset:
* obj_desc->index_field.Value = (u32)
* ACPI_DIV_8 (Info->field_bit_position);
*/
obj_desc->index_field.value =
(u32) ACPI_ROUND_DOWN(ACPI_DIV_8(info->field_bit_position),
obj_desc->index_field.
access_byte_width);
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
"IndexField: BitOff %X, Off %X, Value %X, Gran %X, Index %p, Data %p\n",
obj_desc->index_field.start_field_bit_offset,
obj_desc->index_field.base_byte_offset,
obj_desc->index_field.value,
obj_desc->field.access_byte_width,
obj_desc->index_field.index_obj,
obj_desc->index_field.data_obj));
break;
default:
/* No other types should get here */
break;
}
/*
* Store the constructed descriptor (obj_desc) into the parent Node,
* preserving the current type of that named_obj.
*/
status = acpi_ns_attach_object(info->field_node, obj_desc,
acpi_ns_get_type(info->field_node));
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
"Set NamedObj %p [%4.4s], ObjDesc %p\n",
info->field_node,
acpi_ut_get_node_name(info->field_node), obj_desc));
/* Remove local reference to the object */
acpi_ut_remove_reference(obj_desc);
return_ACPI_STATUS(status);
}
acpi_status
acpi_ex_prep_common_field_object(union acpi_operand_object *obj_desc,
u8 field_flags,
u8 field_attribute,
u32 field_bit_position, u32 field_bit_length)
{
u32 access_bit_width;
u32 byte_alignment;
u32 nearest_byte_address;
ACPI_FUNCTION_TRACE(ex_prep_common_field_object);
/*
* Note: the structure being initialized is the
* ACPI_COMMON_FIELD_INFO; No structure fields outside of the common
* area are initialized by this procedure.
*/
obj_desc->common_field.field_flags = field_flags;
obj_desc->common_field.attribute = field_attribute;
obj_desc->common_field.bit_length = field_bit_length;
/*
* Decode the access type so we can compute offsets. The access type gives
* two pieces of information - the width of each field access and the
* necessary byte_alignment (address granularity) of the access.
*
* For any_acc, the access_bit_width is the largest width that is both
* necessary and possible in an attempt to access the whole field in one
* I/O operation. However, for any_acc, the byte_alignment is always one
* byte.
*
* For all Buffer Fields, the byte_alignment is always one byte.
*
* For all other access types (Byte, Word, Dword, Qword), the Bitwidth is
* the same (equivalent) as the byte_alignment.
*/
access_bit_width = acpi_ex_decode_field_access(obj_desc, field_flags,
&byte_alignment);
if (!access_bit_width) {
return_ACPI_STATUS(AE_AML_OPERAND_VALUE);
}
/* Setup width (access granularity) fields */
obj_desc->common_field.access_byte_width = (u8)
ACPI_DIV_8(access_bit_width); /* 1, 2, 4, 8 */
obj_desc->common_field.access_bit_width = (u8) access_bit_width;
/*
* base_byte_offset is the address of the start of the field within the
* region. It is the byte address of the first *datum* (field-width data
* unit) of the field. (i.e., the first datum that contains at least the
* first *bit* of the field.)
*
* Note: byte_alignment is always either equal to the access_bit_width or 8
* (Byte access), and it defines the addressing granularity of the parent
* region or buffer.
*/
nearest_byte_address =
ACPI_ROUND_BITS_DOWN_TO_BYTES(field_bit_position);
obj_desc->common_field.base_byte_offset = (u32)
ACPI_ROUND_DOWN(nearest_byte_address, byte_alignment);
/*
* start_field_bit_offset is the offset of the first bit of the field within
* a field datum.
*/
obj_desc->common_field.start_field_bit_offset = (u8)
(field_bit_position -
ACPI_MUL_8(obj_desc->common_field.base_byte_offset));
return_ACPI_STATUS(AE_OK);
}
static u32
acpi_ex_generate_access(u32 field_bit_offset,
u32 field_bit_length, u32 region_length)
{
u32 field_byte_length;
u32 field_byte_offset;
u32 field_byte_end_offset;
u32 access_byte_width;
u32 field_start_offset;
u32 field_end_offset;
u32 minimum_access_width = 0xFFFFFFFF;
u32 minimum_accesses = 0xFFFFFFFF;
u32 accesses;
ACPI_FUNCTION_TRACE(ex_generate_access);
/* */
field_byte_offset = ACPI_DIV_8(ACPI_ROUND_DOWN(field_bit_offset, 8));
field_byte_end_offset = ACPI_DIV_8(ACPI_ROUND_UP(field_bit_length +
field_bit_offset, 8));
field_byte_length = field_byte_end_offset - field_byte_offset;
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
"Bit length %u, Bit offset %u\n",
field_bit_length, field_bit_offset));
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
"Byte Length %u, Byte Offset %u, End Offset %u\n",
field_byte_length, field_byte_offset,
field_byte_end_offset));
/*
*/
for (access_byte_width = 1; access_byte_width <= 8;
access_byte_width <<= 1) {
/*
*/
if (ACPI_ROUND_UP(field_byte_end_offset, access_byte_width) <=
region_length) {
field_start_offset =
ACPI_ROUND_DOWN(field_byte_offset,
access_byte_width) /
access_byte_width;
field_end_offset =
ACPI_ROUND_UP((field_byte_length +
field_byte_offset),
access_byte_width) /
access_byte_width;
accesses = field_end_offset - field_start_offset;
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
"AccessWidth %u end is within region\n",
access_byte_width));
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
"Field Start %u, Field End %u -- requires %u accesses\n",
field_start_offset, field_end_offset,
accesses));
/* */
if (accesses <= 1) {
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
"Entire field can be accessed with one operation of size %u\n",
access_byte_width));
return_VALUE(access_byte_width);
}
/*
*/
if (accesses < minimum_accesses) {
minimum_accesses = accesses;
minimum_access_width = access_byte_width;
}
} else {
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
"AccessWidth %u end is NOT within region\n",
access_byte_width));
if (access_byte_width == 1) {
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
"Field goes beyond end-of-region!\n"));
/* */
return_VALUE(0);
}
/*
*/
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
"Backing off to previous optimal access width of %u\n",
minimum_access_width));
return_VALUE(minimum_access_width);
}
}
/*
*/
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
"Cannot access field in one operation, using width 8\n"));
return_VALUE(8);
}
acpi_status acpi_ex_prep_field_value(struct acpi_create_field_info *info)
{
union acpi_operand_object *obj_desc;
union acpi_operand_object *second_desc = NULL;
acpi_status status;
u32 access_byte_width;
u32 type;
ACPI_FUNCTION_TRACE(ex_prep_field_value);
/* */
if (info->field_type != ACPI_TYPE_LOCAL_INDEX_FIELD) {
if (!info->region_node) {
ACPI_ERROR((AE_INFO, "Null RegionNode"));
return_ACPI_STATUS(AE_AML_NO_OPERAND);
}
type = acpi_ns_get_type(info->region_node);
if (type != ACPI_TYPE_REGION) {
ACPI_ERROR((AE_INFO,
"Needed Region, found type 0x%X (%s)", type,
acpi_ut_get_type_name(type)));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
}
/* */
obj_desc = acpi_ut_create_internal_object(info->field_type);
if (!obj_desc) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
/* */
obj_desc->common_field.node = info->field_node;
status = acpi_ex_prep_common_field_object(obj_desc,
info->field_flags,
info->attribute,
info->field_bit_position,
info->field_bit_length);
if (ACPI_FAILURE(status)) {
acpi_ut_delete_object_desc(obj_desc);
return_ACPI_STATUS(status);
}
/* */
switch (info->field_type) {
case ACPI_TYPE_LOCAL_REGION_FIELD:
obj_desc->field.region_obj =
acpi_ns_get_attached_object(info->region_node);
/* */
obj_desc->field.access_length = info->access_length;
if (info->connection_node) {
second_desc = info->connection_node->object;
if (!(second_desc->common.flags & AOPOBJ_DATA_VALID)) {
status =
acpi_ds_get_buffer_arguments(second_desc);
if (ACPI_FAILURE(status)) {
acpi_ut_delete_object_desc(obj_desc);
return_ACPI_STATUS(status);
}
}
obj_desc->field.resource_buffer =
second_desc->buffer.pointer;
obj_desc->field.resource_length =
(u16)second_desc->buffer.length;
} else if (info->resource_buffer) {
obj_desc->field.resource_buffer = info->resource_buffer;
obj_desc->field.resource_length = info->resource_length;
}
/* */
if ((obj_desc->field.region_obj->region.space_id ==
ACPI_ADR_SPACE_EC)
&& (obj_desc->common_field.bit_length > 8)) {
access_byte_width =
ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->common_field.
bit_length);
/* */
if (access_byte_width < 256) {
obj_desc->common_field.access_byte_width =
(u8)access_byte_width;
}
}
/* */
acpi_ut_add_reference(obj_desc->field.region_obj);
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
"RegionField: BitOff %X, Off %X, Gran %X, Region %p\n",
obj_desc->field.start_field_bit_offset,
obj_desc->field.base_byte_offset,
obj_desc->field.access_byte_width,
obj_desc->field.region_obj));
break;
case ACPI_TYPE_LOCAL_BANK_FIELD:
obj_desc->bank_field.value = info->bank_value;
obj_desc->bank_field.region_obj =
acpi_ns_get_attached_object(info->region_node);
obj_desc->bank_field.bank_obj =
acpi_ns_get_attached_object(info->register_node);
/* */
acpi_ut_add_reference(obj_desc->bank_field.region_obj);
acpi_ut_add_reference(obj_desc->bank_field.bank_obj);
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
"Bank Field: BitOff %X, Off %X, Gran %X, Region %p, BankReg %p\n",
obj_desc->bank_field.start_field_bit_offset,
obj_desc->bank_field.base_byte_offset,
obj_desc->field.access_byte_width,
obj_desc->bank_field.region_obj,
obj_desc->bank_field.bank_obj));
/*
*/
second_desc = obj_desc->common.next_object;
second_desc->extra.aml_start =
ACPI_CAST_PTR(union acpi_parse_object,
info->data_register_node)->named.data;
second_desc->extra.aml_length =
ACPI_CAST_PTR(union acpi_parse_object,
info->data_register_node)->named.length;
break;
case ACPI_TYPE_LOCAL_INDEX_FIELD:
/* */
obj_desc->index_field.index_obj =
acpi_ns_get_attached_object(info->register_node);
obj_desc->index_field.data_obj =
acpi_ns_get_attached_object(info->data_register_node);
if (!obj_desc->index_field.data_obj
|| !obj_desc->index_field.index_obj) {
ACPI_ERROR((AE_INFO,
"Null Index Object during field prep"));
acpi_ut_delete_object_desc(obj_desc);
return_ACPI_STATUS(AE_AML_INTERNAL);
}
/* */
acpi_ut_add_reference(obj_desc->index_field.data_obj);
acpi_ut_add_reference(obj_desc->index_field.index_obj);
/*
*/
obj_desc->index_field.value =
(u32) ACPI_ROUND_DOWN(ACPI_DIV_8(info->field_bit_position),
obj_desc->index_field.
access_byte_width);
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
"IndexField: BitOff %X, Off %X, Value %X, Gran %X, Index %p, Data %p\n",
obj_desc->index_field.start_field_bit_offset,
obj_desc->index_field.base_byte_offset,
obj_desc->index_field.value,
obj_desc->field.access_byte_width,
obj_desc->index_field.index_obj,
obj_desc->index_field.data_obj));
break;
default:
/* */
break;
}
/*
*/
status = acpi_ns_attach_object(info->field_node, obj_desc,
acpi_ns_get_type(info->field_node));
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
"Set NamedObj %p [%4.4s], ObjDesc %p\n",
info->field_node,
acpi_ut_get_node_name(info->field_node), obj_desc));
/* */
acpi_ut_remove_reference(obj_desc);
return_ACPI_STATUS(status);
}
ACPI_STATUS
AcpiExPrepFieldValue (
ACPI_CREATE_FIELD_INFO *Info)
{
ACPI_OPERAND_OBJECT *ObjDesc;
ACPI_OPERAND_OBJECT *SecondDesc = NULL;
ACPI_STATUS Status;
UINT32 AccessByteWidth;
UINT32 Type;
ACPI_FUNCTION_TRACE (ExPrepFieldValue);
/* Parameter validation */
if (Info->FieldType != ACPI_TYPE_LOCAL_INDEX_FIELD)
{
if (!Info->RegionNode)
{
ACPI_ERROR ((AE_INFO, "Null RegionNode"));
return_ACPI_STATUS (AE_AML_NO_OPERAND);
}
Type = AcpiNsGetType (Info->RegionNode);
if (Type != ACPI_TYPE_REGION)
{
ACPI_ERROR ((AE_INFO, "Needed Region, found type 0x%X (%s)",
Type, AcpiUtGetTypeName (Type)));
return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
}
}
/* Allocate a new field object */
ObjDesc = AcpiUtCreateInternalObject (Info->FieldType);
if (!ObjDesc)
{
return_ACPI_STATUS (AE_NO_MEMORY);
}
/* Initialize areas of the object that are common to all fields */
ObjDesc->CommonField.Node = Info->FieldNode;
Status = AcpiExPrepCommonFieldObject (ObjDesc,
Info->FieldFlags, Info->Attribute,
Info->FieldBitPosition, Info->FieldBitLength);
if (ACPI_FAILURE (Status))
{
AcpiUtDeleteObjectDesc (ObjDesc);
return_ACPI_STATUS (Status);
}
/* Initialize areas of the object that are specific to the field type */
switch (Info->FieldType)
{
case ACPI_TYPE_LOCAL_REGION_FIELD:
ObjDesc->Field.RegionObj = AcpiNsGetAttachedObject (Info->RegionNode);
/* Fields specific to GenericSerialBus fields */
ObjDesc->Field.AccessLength = Info->AccessLength;
if (Info->ConnectionNode)
{
SecondDesc = Info->ConnectionNode->Object;
if (!(SecondDesc->Common.Flags & AOPOBJ_DATA_VALID))
{
Status = AcpiDsGetBufferArguments (SecondDesc);
if (ACPI_FAILURE (Status))
{
AcpiUtDeleteObjectDesc (ObjDesc);
return_ACPI_STATUS (Status);
}
}
ObjDesc->Field.ResourceBuffer = SecondDesc->Buffer.Pointer;
ObjDesc->Field.ResourceLength = (UINT16) SecondDesc->Buffer.Length;
}
else if (Info->ResourceBuffer)
{
ObjDesc->Field.ResourceBuffer = Info->ResourceBuffer;
ObjDesc->Field.ResourceLength = Info->ResourceLength;
}
/* Allow full data read from EC address space */
if ((ObjDesc->Field.RegionObj->Region.SpaceId == ACPI_ADR_SPACE_EC) &&
(ObjDesc->CommonField.BitLength > 8))
{
AccessByteWidth = ACPI_ROUND_BITS_UP_TO_BYTES (
ObjDesc->CommonField.BitLength);
/* Maximum byte width supported is 255 */
if (AccessByteWidth < 256)
{
ObjDesc->CommonField.AccessByteWidth = (UINT8) AccessByteWidth;
}
}
/* An additional reference for the container */
AcpiUtAddReference (ObjDesc->Field.RegionObj);
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
"RegionField: BitOff %X, Off %X, Gran %X, Region %p\n",
ObjDesc->Field.StartFieldBitOffset, ObjDesc->Field.BaseByteOffset,
ObjDesc->Field.AccessByteWidth, ObjDesc->Field.RegionObj));
break;
case ACPI_TYPE_LOCAL_BANK_FIELD:
ObjDesc->BankField.Value = Info->BankValue;
ObjDesc->BankField.RegionObj =
AcpiNsGetAttachedObject (Info->RegionNode);
ObjDesc->BankField.BankObj =
AcpiNsGetAttachedObject (Info->RegisterNode);
/* An additional reference for the attached objects */
AcpiUtAddReference (ObjDesc->BankField.RegionObj);
AcpiUtAddReference (ObjDesc->BankField.BankObj);
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
"Bank Field: BitOff %X, Off %X, Gran %X, Region %p, BankReg %p\n",
ObjDesc->BankField.StartFieldBitOffset,
ObjDesc->BankField.BaseByteOffset,
ObjDesc->Field.AccessByteWidth,
ObjDesc->BankField.RegionObj,
ObjDesc->BankField.BankObj));
/*
* Remember location in AML stream of the field unit
* opcode and operands -- since the BankValue
* operands must be evaluated.
*/
SecondDesc = ObjDesc->Common.NextObject;
SecondDesc->Extra.AmlStart = ACPI_CAST_PTR (ACPI_PARSE_OBJECT,
Info->DataRegisterNode)->Named.Data;
SecondDesc->Extra.AmlLength = ACPI_CAST_PTR (ACPI_PARSE_OBJECT,
Info->DataRegisterNode)->Named.Length;
break;
case ACPI_TYPE_LOCAL_INDEX_FIELD:
/* Get the Index and Data registers */
ObjDesc->IndexField.IndexObj =
AcpiNsGetAttachedObject (Info->RegisterNode);
ObjDesc->IndexField.DataObj =
AcpiNsGetAttachedObject (Info->DataRegisterNode);
if (!ObjDesc->IndexField.DataObj || !ObjDesc->IndexField.IndexObj)
{
ACPI_ERROR ((AE_INFO, "Null Index Object during field prep"));
AcpiUtDeleteObjectDesc (ObjDesc);
return_ACPI_STATUS (AE_AML_INTERNAL);
}
/* An additional reference for the attached objects */
AcpiUtAddReference (ObjDesc->IndexField.DataObj);
AcpiUtAddReference (ObjDesc->IndexField.IndexObj);
/*
* April 2006: Changed to match MS behavior
*
* The value written to the Index register is the byte offset of the
* target field in units of the granularity of the IndexField
*
* Previously, the value was calculated as an index in terms of the
* width of the Data register, as below:
*
* ObjDesc->IndexField.Value = (UINT32)
* (Info->FieldBitPosition / ACPI_MUL_8 (
* ObjDesc->Field.AccessByteWidth));
*
* February 2006: Tried value as a byte offset:
* ObjDesc->IndexField.Value = (UINT32)
* ACPI_DIV_8 (Info->FieldBitPosition);
*/
ObjDesc->IndexField.Value = (UINT32) ACPI_ROUND_DOWN (
ACPI_DIV_8 (Info->FieldBitPosition),
ObjDesc->IndexField.AccessByteWidth);
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
"IndexField: BitOff %X, Off %X, Value %X, Gran %X, Index %p, Data %p\n",
ObjDesc->IndexField.StartFieldBitOffset,
ObjDesc->IndexField.BaseByteOffset,
ObjDesc->IndexField.Value,
ObjDesc->Field.AccessByteWidth,
ObjDesc->IndexField.IndexObj,
ObjDesc->IndexField.DataObj));
break;
default:
/* No other types should get here */
break;
}
/*
* Store the constructed descriptor (ObjDesc) into the parent Node,
* preserving the current type of that NamedObj.
*/
Status = AcpiNsAttachObject (Info->FieldNode, ObjDesc,
AcpiNsGetType (Info->FieldNode));
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, "Set NamedObj %p [%4.4s], ObjDesc %p\n",
Info->FieldNode, AcpiUtGetNodeName (Info->FieldNode), ObjDesc));
/* Remove local reference to the object */
AcpiUtRemoveReference (ObjDesc);
return_ACPI_STATUS (Status);
}
ACPI_STATUS
AcpiExPrepCommonFieldObject (
ACPI_OPERAND_OBJECT *ObjDesc,
UINT8 FieldFlags,
UINT8 FieldAttribute,
UINT32 FieldBitPosition,
UINT32 FieldBitLength)
{
UINT32 AccessBitWidth;
UINT32 ByteAlignment;
UINT32 NearestByteAddress;
ACPI_FUNCTION_TRACE (ExPrepCommonFieldObject);
/*
* Note: the structure being initialized is the
* ACPI_COMMON_FIELD_INFO; No structure fields outside of the common
* area are initialized by this procedure.
*/
ObjDesc->CommonField.FieldFlags = FieldFlags;
ObjDesc->CommonField.Attribute = FieldAttribute;
ObjDesc->CommonField.BitLength = FieldBitLength;
/*
* Decode the access type so we can compute offsets. The access type gives
* two pieces of information - the width of each field access and the
* necessary ByteAlignment (address granularity) of the access.
*
* For AnyAcc, the AccessBitWidth is the largest width that is both
* necessary and possible in an attempt to access the whole field in one
* I/O operation. However, for AnyAcc, the ByteAlignment is always one
* byte.
*
* For all Buffer Fields, the ByteAlignment is always one byte.
*
* For all other access types (Byte, Word, Dword, Qword), the Bitwidth is
* the same (equivalent) as the ByteAlignment.
*/
AccessBitWidth = AcpiExDecodeFieldAccess (ObjDesc, FieldFlags,
&ByteAlignment);
if (!AccessBitWidth)
{
return_ACPI_STATUS (AE_AML_OPERAND_VALUE);
}
/* Setup width (access granularity) fields (values are: 1, 2, 4, 8) */
ObjDesc->CommonField.AccessByteWidth = (UINT8)
ACPI_DIV_8 (AccessBitWidth);
/*
* BaseByteOffset is the address of the start of the field within the
* region. It is the byte address of the first *datum* (field-width data
* unit) of the field. (i.e., the first datum that contains at least the
* first *bit* of the field.)
*
* Note: ByteAlignment is always either equal to the AccessBitWidth or 8
* (Byte access), and it defines the addressing granularity of the parent
* region or buffer.
*/
NearestByteAddress =
ACPI_ROUND_BITS_DOWN_TO_BYTES (FieldBitPosition);
ObjDesc->CommonField.BaseByteOffset = (UINT32)
ACPI_ROUND_DOWN (NearestByteAddress, ByteAlignment);
/*
* StartFieldBitOffset is the offset of the first bit of the field within
* a field datum.
*/
ObjDesc->CommonField.StartFieldBitOffset = (UINT8)
(FieldBitPosition - ACPI_MUL_8 (ObjDesc->CommonField.BaseByteOffset));
return_ACPI_STATUS (AE_OK);
}
static UINT32
AcpiExGenerateAccess (
UINT32 FieldBitOffset,
UINT32 FieldBitLength,
UINT32 RegionLength)
{
UINT32 FieldByteLength;
UINT32 FieldByteOffset;
UINT32 FieldByteEndOffset;
UINT32 AccessByteWidth;
UINT32 FieldStartOffset;
UINT32 FieldEndOffset;
UINT32 MinimumAccessWidth = 0xFFFFFFFF;
UINT32 MinimumAccesses = 0xFFFFFFFF;
UINT32 Accesses;
ACPI_FUNCTION_TRACE (ExGenerateAccess);
/* Round Field start offset and length to "minimal" byte boundaries */
FieldByteOffset = ACPI_DIV_8 (ACPI_ROUND_DOWN (FieldBitOffset, 8));
FieldByteEndOffset = ACPI_DIV_8 (ACPI_ROUND_UP (FieldBitLength +
FieldBitOffset, 8));
FieldByteLength = FieldByteEndOffset - FieldByteOffset;
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
"Bit length %u, Bit offset %u\n",
FieldBitLength, FieldBitOffset));
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
"Byte Length %u, Byte Offset %u, End Offset %u\n",
FieldByteLength, FieldByteOffset, FieldByteEndOffset));
/*
* Iterative search for the maximum access width that is both aligned
* and does not go beyond the end of the region
*
* Start at ByteAcc and work upwards to QwordAcc max. (1,2,4,8 bytes)
*/
for (AccessByteWidth = 1; AccessByteWidth <= 8; AccessByteWidth <<= 1)
{
/*
* 1) Round end offset up to next access boundary and make sure that
* this does not go beyond the end of the parent region.
* 2) When the Access width is greater than the FieldByteLength, we
* are done. (This does not optimize for the perfectly aligned
* case yet).
*/
if (ACPI_ROUND_UP (FieldByteEndOffset, AccessByteWidth) <= RegionLength)
{
FieldStartOffset =
ACPI_ROUND_DOWN (FieldByteOffset, AccessByteWidth) /
AccessByteWidth;
FieldEndOffset =
ACPI_ROUND_UP ((FieldByteLength + FieldByteOffset),
AccessByteWidth) / AccessByteWidth;
Accesses = FieldEndOffset - FieldStartOffset;
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
"AccessWidth %u end is within region\n", AccessByteWidth));
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
"Field Start %u, Field End %u -- requires %u accesses\n",
FieldStartOffset, FieldEndOffset, Accesses));
/* Single access is optimal */
if (Accesses <= 1)
{
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
"Entire field can be accessed with one operation of size %u\n",
AccessByteWidth));
return_VALUE (AccessByteWidth);
}
/*
* Fits in the region, but requires more than one read/write.
* try the next wider access on next iteration
*/
if (Accesses < MinimumAccesses)
{
MinimumAccesses = Accesses;
MinimumAccessWidth = AccessByteWidth;
}
}
else
{
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
"AccessWidth %u end is NOT within region\n", AccessByteWidth));
if (AccessByteWidth == 1)
{
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
"Field goes beyond end-of-region!\n"));
/* Field does not fit in the region at all */
return_VALUE (0);
}
/*
* This width goes beyond the end-of-region, back off to
* previous access
*/
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
"Backing off to previous optimal access width of %u\n",
MinimumAccessWidth));
return_VALUE (MinimumAccessWidth);
}
}
/*
* Could not read/write field with one operation,
* just use max access width
*/
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
"Cannot access field in one operation, using width 8\n"));
return_VALUE (8);
}
acpi_status
acpi_ex_prep_common_field_object (
union acpi_operand_object *obj_desc,
u8 field_flags,
u8 field_attribute,
u32 field_bit_position,
u32 field_bit_length)
{
u32 access_bit_width;
u32 byte_alignment;
u32 nearest_byte_address;
ACPI_FUNCTION_TRACE ("ex_prep_common_field_object");
/*
* Note: the structure being initialized is the
* ACPI_COMMON_FIELD_INFO; No structure fields outside of the common
* area are initialized by this procedure.
*/
obj_desc->common_field.field_flags = field_flags;
obj_desc->common_field.attribute = field_attribute;
obj_desc->common_field.bit_length = field_bit_length;
/*
* Decode the access type so we can compute offsets. The access type gives
* two pieces of information - the width of each field access and the
* necessary byte_alignment (address granularity) of the access.
*
* For any_acc, the access_bit_width is the largest width that is both
* necessary and possible in an attempt to access the whole field in one
* I/O operation. However, for any_acc, the byte_alignment is always one
* byte.
*
* For all Buffer Fields, the byte_alignment is always one byte.
*
* For all other access types (Byte, Word, Dword, Qword), the Bitwidth is
* the same (equivalent) as the byte_alignment.
*/
access_bit_width = acpi_ex_decode_field_access (obj_desc, field_flags,
&byte_alignment);
if (!access_bit_width) {
return_ACPI_STATUS (AE_AML_OPERAND_VALUE);
}
/* Setup width (access granularity) fields */
obj_desc->common_field.access_byte_width = (u8)
ACPI_DIV_8 (access_bit_width); /* 1, 2, 4, 8 */
/*
* base_byte_offset is the address of the start of the field within the
* region. It is the byte address of the first *datum* (field-width data
* unit) of the field. (i.e., the first datum that contains at least the
* first *bit* of the field.)
*
* Note: byte_alignment is always either equal to the access_bit_width or 8
* (Byte access), and it defines the addressing granularity of the parent
* region or buffer.
*/
nearest_byte_address =
ACPI_ROUND_BITS_DOWN_TO_BYTES (field_bit_position);
obj_desc->common_field.base_byte_offset =
ACPI_ROUND_DOWN (nearest_byte_address, byte_alignment);
/*
* start_field_bit_offset is the offset of the first bit of the field within
* a field datum.
*/
obj_desc->common_field.start_field_bit_offset = (u8)
(field_bit_position - ACPI_MUL_8 (obj_desc->common_field.base_byte_offset));
/*
* Valid bits -- the number of bits that compose a partial datum,
* 1) At the end of the field within the region (arbitrary starting bit
* offset)
* 2) At the end of a buffer used to contain the field (starting offset
* always zero)
*/
obj_desc->common_field.end_field_valid_bits = (u8)
((obj_desc->common_field.start_field_bit_offset + field_bit_length) %
access_bit_width);
/* start_buffer_bit_offset always = 0 */
obj_desc->common_field.end_buffer_valid_bits = (u8)
(field_bit_length % access_bit_width);
/*
* datum_valid_bits is the number of valid field bits in the first
* field datum.
*/
obj_desc->common_field.datum_valid_bits = (u8)
(access_bit_width - obj_desc->common_field.start_field_bit_offset);
/*
* Does the entire field fit within a single field access element? (datum)
* (i.e., without crossing a datum boundary)
*/
if ((obj_desc->common_field.start_field_bit_offset + field_bit_length) <=
(u16) access_bit_width) {
obj_desc->common.flags |= AOPOBJ_SINGLE_DATUM;
}
return_ACPI_STATUS (AE_OK);
}