void
Adt7461ParameterCapsGet(
NvOdmTmonDeviceHandle hTmon,
NvOdmTmonZoneID ZoneId,
NvOdmTmonConfigParam ParamId,
NvOdmTmonParameterCaps* pCaps)
{
NvBool ExtRange;
ADT7461PrivData* pPrivData;
const ADT7461ChannelInfo* pChannel;
NV_ASSERT(hTmon && hTmon->pPrivate && pCaps);
pPrivData = hTmon->pPrivate;
#if PRE_ER_GMT_THERMALSENSOR
ExtRange = 0; /* not support ADT thermal sensor*/
#else
ExtRange = ((pPrivData->ShadowConfig &
ADT7461ConfigBits_ExtendedRange) != 0);
#endif
pChannel = &pPrivData->pDeviceInfo->Channels[(
pPrivData->ConnectivityMap[ZoneId])];
switch (ParamId)
{
case NvOdmTmonConfigParam_IntrLimitHigh:
case NvOdmTmonConfigParam_IntrLimitLow:
pCaps->OdmProtected =
pChannel->ChannelPolicy.IntrLimitsOdmProtected;
break;
case NvOdmTmonConfigParam_HwLimitCrit:
pCaps->OdmProtected =
pChannel->ChannelPolicy.HwLimitCritOdmProtected;
break;
case NvOdmTmonConfigParam_SampleMs:
// smaple intervals in descending order
pCaps->MaxValue = s_Adt7461SampleIntervalsMS[0];
pCaps->MinValue = s_Adt7461SampleIntervalsMS[(
NV_ARRAY_SIZE(s_Adt7461SampleIntervalsMS) - 1)];
pCaps->OdmProtected = pChannel->ChannelPolicy.RateOdmProtected;
return;
default: // unsupported parameter
pCaps->MaxValue = ODM_TMON_PARAMETER_UNSPECIFIED;
pCaps->MinValue = ODM_TMON_PARAMETER_UNSPECIFIED;
pCaps->OdmProtected = NV_TRUE;
return;
}
// Common range for limits
pCaps->MaxValue = ADT7461_T_RANGE_LIMIT_HIGH(ExtRange);
pCaps->MinValue = ADT7461_T_RANGE_LIMIT_LOW(ExtRange);
}
void
Adt7461CapabilitiesGet(
NvOdmTmonDeviceHandle hTmon,
NvOdmTmonZoneID ZoneId,
NvOdmTmonCapabilities* pCaps)
{
NvBool ExtRange;
ADT7461PrivData* pPrivData;
NV_ASSERT(hTmon && hTmon->pPrivate && pCaps);
pPrivData = hTmon->pPrivate;
ExtRange = ((pPrivData->ShadowConfig &
ADT7461ConfigBits_ExtendedRange) != 0);
pCaps->Tmax = ADT7461_T_RANGE_LIMIT_HIGH(ExtRange);
pCaps->Tmin = ADT7461_T_RANGE_LIMIT_LOW(ExtRange);
pCaps->IntrSupported = NV_TRUE;
pCaps->HwCriticalSupported = NV_TRUE;
pCaps->HwCoolingSupported = NV_FALSE;
}
void
Adt7461CapabilitiesGet(
NvOdmTmonDeviceHandle hTmon,
NvOdmTmonZoneID ZoneId,
NvOdmTmonCapabilities* pCaps)
{
NvBool ExtRange;
ADT7461PrivData* pPrivData;
NV_ASSERT(hTmon && hTmon->pPrivate && pCaps);
pPrivData = hTmon->pPrivate;
#if PRE_ER_GMT_THERMALSENSOR
ExtRange = 0; /* not support ADT thermal sensor*/
#else
ExtRange = ((pPrivData->ShadowConfig &
ADT7461ConfigBits_ExtendedRange) != 0);
#endif
pCaps->Tmax = ADT7461_T_RANGE_LIMIT_HIGH(ExtRange);
pCaps->Tmin = ADT7461_T_RANGE_LIMIT_LOW(ExtRange);
pCaps->IntrSupported = NV_TRUE;
pCaps->HwCriticalSupported = NV_TRUE;
pCaps->HwCoolingSupported = NV_FALSE;
}
NvBool
Adt7461ParameterConfig(
NvOdmTmonDeviceHandle hTmon,
NvOdmTmonZoneID ZoneId,
NvOdmTmonConfigParam ParamId,
NvS32* pSetting)
{
NvU8 Data;
NvBool ExtRange, OdmProtected;
ADT7461PrivData* pPrivData;
const ADT7461RegisterInfo* pReg;
const ADT7461ChannelInfo* pChannel;
NV_ASSERT(hTmon && hTmon->pPrivate && pSetting);
pPrivData = hTmon->pPrivate;
#if PRE_ER_GMT_THERMALSENSOR
ExtRange = 0; /* not support ADT thermal sensor*/
#else
ExtRange = ((pPrivData->ShadowConfig &
ADT7461ConfigBits_ExtendedRange) != 0);
#endif
pChannel = &pPrivData->pDeviceInfo->Channels[(
pPrivData->ConnectivityMap[ZoneId])];
switch (ParamId)
{
case NvOdmTmonConfigParam_IntrLimitHigh:
#if PRE_ER_WORKAROUND
return NV_TRUE;
#endif
pReg = &pChannel->IntrLimitHigh;
OdmProtected = pChannel->ChannelPolicy.IntrLimitsOdmProtected;
break;
case NvOdmTmonConfigParam_IntrLimitLow:
#if PRE_ER_WORKAROUND
return NV_TRUE;
#endif
pReg = &pChannel->IntrLimitLow;
OdmProtected = pChannel->ChannelPolicy.IntrLimitsOdmProtected;
break;
case NvOdmTmonConfigParam_HwLimitCrit:
#if PRE_ER_WORKAROUND
return NV_TRUE;
#endif
pReg = &pChannel->ComparatorLimit;
OdmProtected = pChannel->ChannelPolicy.HwLimitCritOdmProtected;
break;
case NvOdmTmonConfigParam_SampleMs:
OdmProtected = pChannel->ChannelPolicy.RateOdmProtected;
return Adt7461ConfigureSampleInterval(
pPrivData, OdmProtected, pSetting);
default: // unsupported parameter
*pSetting = ODM_TMON_PARAMETER_UNSPECIFIED;
return NV_TRUE;
}
// Common processing for temperature limits configuration
if ((OdmProtected) ||
((*pSetting) == ODM_TMON_PARAMETER_UNSPECIFIED))
{
// Read ADT7461 register and convert data to current parameter value
if(!Adt7461ReadReg(pPrivData, pReg, &Data))
return NV_FALSE;
*pSetting = ADT7461_T_DATA_TO_VALUE(ExtRange, Data);
}
else
{
// Clip target setting to temperature range
if ((*pSetting) > ADT7461_T_RANGE_LIMIT_HIGH(ExtRange))
*pSetting = ADT7461_T_RANGE_LIMIT_HIGH(ExtRange);
else if ((*pSetting) < ADT7461_T_RANGE_LIMIT_LOW(ExtRange))
*pSetting = ADT7461_T_RANGE_LIMIT_LOW(ExtRange);
// Convert new configuration setting and write to ADT7461 register
Data = ADT7461_T_VALUE_TO_DATA(ExtRange, *pSetting);
if(!Adt7461WriteReg(pPrivData, pReg, Data))
return NV_FALSE;
}
return NV_TRUE;
}
NvBool Adt7461Init(NvOdmTmonDeviceHandle hTmon)
{
NvU8 Data;
NvBool ExtRange;
NvU32 i = 0;
NvU32 I2cInstance = 0;
NvOdmIoModule I2cModule = NvOdmIoModule_Num; // Inavlid module
const ADT7461RegisterInfo* pReg = NULL;
ADT7461PrivData* pPrivData = NULL;
NV_ASSERT(hTmon && hTmon->pConn && hTmon->pConn->AddressList);
// Allocate and clear priavte data
pPrivData = (ADT7461PrivData*) NvOdmOsAlloc(sizeof(ADT7461PrivData));
if (pPrivData == NULL)
{
NVODM_ADT7461_PRINTF(("ADT7461: Error Allocating PrivData. \n"));
return NV_FALSE;
}
NvOdmOsMemset(pPrivData, 0, sizeof(ADT7461PrivData));
hTmon->pPrivate = pPrivData;
// Register for PMU services
pPrivData->hOdmPmuSevice = NvOdmServicesPmuOpen();
if (pPrivData->hOdmPmuSevice == NULL)
{
NVODM_ADT7461_PRINTF(("ADT7461: Error Open PMU service. \n"));
goto fail;
}
// Register for GPIO services
pPrivData->hGpio = NvOdmGpioOpen();
if (pPrivData->hOdmPmuSevice == NULL)
{
NVODM_ADT7461_PRINTF(("ADT7461: Error Open GPIO service. \n"));
goto fail;
}
/*
* Parse connectivity data: turn On power to the device, acquire I2C
* interface and GPIO interrupt (optional); map device channels to
* thermal zones
*/
for (i = 0; i < hTmon->pConn->NumAddress; i ++)
{
const NvOdmIoAddress* pIoAddress = &hTmon->pConn->AddressList[i];
if (pIoAddress->Interface == NvOdmIoModule_I2c_Pmu)
{
I2cModule = NvOdmIoModule_I2c_Pmu;
I2cInstance = pIoAddress->Instance;
NV_ASSERT(pIoAddress->Address != 0);
pPrivData->DeviceI2cAddr = pIoAddress->Address;
}
else if (pIoAddress->Interface == NvOdmIoModule_Tsense)
{
NV_ASSERT(pIoAddress->Instance < NvOdmTmonZoneID_Num);
NV_ASSERT(pIoAddress->Address < ADT7461ChannelID_Num);
pPrivData->ConnectivityMap[pIoAddress->Instance] =
pIoAddress->Address;
}
else if (pIoAddress->Interface == NvOdmIoModule_Vdd)
{
NvU32 usec = 0;
NvU32 RailAddress = pIoAddress->Address;
NvOdmServicesPmuVddRailCapabilities RailCapabilities;
NvOdmServicesPmuGetCapabilities(
pPrivData->hOdmPmuSevice, RailAddress, &RailCapabilities);
NvOdmServicesPmuSetVoltage(pPrivData->hOdmPmuSevice, RailAddress,
RailCapabilities.requestMilliVolts, &usec);
NvOdmOsWaitUS(usec + (ADT7461_POWERUP_DELAY_MS * 1000));
}
else if (pIoAddress->Interface == NvOdmIoModule_Gpio)
{
NvU32 port = pIoAddress->Instance;
NvU32 pin = pIoAddress->Address;
pPrivData->hGpioPin = NvOdmGpioAcquirePinHandle(
pPrivData->hGpio, port, pin);
}
}
NV_ASSERT(I2cModule == NvOdmIoModule_I2c_Pmu);
pPrivData->hOdmI2C = NvOdmI2cOpen(I2cModule, I2cInstance);
if (pPrivData->hOdmI2C == NULL)
{
NVODM_ADT7461_PRINTF(("ADT7461: Error Open I2C device. \n"));
goto fail;
}
/*
* Initialize device info and configuration. Force standby mode to avoid
* glitch on shutdown comparator output when temperature range and/or
* comparator limit is changing during initialization. The Adt7461Run()
* call from the hal that follows initialization will switch device to
* run mode and re-start temperature monitoring (note that out of limit
* interrupt is always masked during and after initialization)
*/
pPrivData->pDeviceInfo = &s_Adt7461Info;
pPrivData->ShadowRegPtr = ADT7461_INVALID_ADDR;
pReg = &pPrivData->pDeviceInfo->Config;
if (!Adt7461ReadReg(pPrivData, pReg, &Data))
goto fail;
if ((Data & ADT7461ConfigBits_ExtendedRange) !=
(ADT7461_INITIAL_CONFIG & ADT7461ConfigBits_ExtendedRange))
{
// Only switch from standard to extended range is supported
NV_ASSERT((Data & ADT7461ConfigBits_ExtendedRange) == 0);
Data |= ADT7461ConfigBits_Standby;
if(!Adt7461WriteReg(pPrivData, pReg, Data))
goto fail;
}
Data = ADT7461_INITIAL_CONFIG | ADT7461ConfigBits_Standby;
if(!Adt7461WriteReg(pPrivData, pReg, Data))
goto fail;
pPrivData->ShadowConfig = Data;
#if PRE_ER_GMT_THERMALSENSOR
ExtRange = 0; /* not support ADT thermal sensor*/
#else
ExtRange = ((Data & ADT7461ConfigBits_ExtendedRange) != 0);
#endif
// Program shutdown comparators settings
Data = ADT7461_T_VALUE_TO_DATA(
ExtRange, ADT7461_ODM_LOCAL_COMPARATOR_LIMIT_VALUE);
pReg = &pPrivData->pDeviceInfo->Channels[
ADT7461ChannelID_Local].ComparatorLimit;
if(!Adt7461WriteReg(pPrivData, pReg, Data))
goto fail;
Data = ADT7461_T_VALUE_TO_DATA(
ExtRange, ADT7461_ODM_REMOTE_COMPARATOR_LIMIT_VALUE);
pReg = &pPrivData->pDeviceInfo->Channels[
ADT7461ChannelID_Remote].ComparatorLimit;
if(!Adt7461WriteReg(pPrivData, pReg, Data))
goto fail;
// Set interrupt limits to the range boundaries to prevent out of limit
// interrupt
Data = ADT7461_T_VALUE_TO_DATA(
ExtRange, ADT7461_T_RANGE_LIMIT_HIGH(ExtRange));
pReg = &pPrivData->pDeviceInfo->Channels[
ADT7461ChannelID_Local].IntrLimitHigh;
if(!Adt7461WriteReg(pPrivData, pReg, Data))
goto fail;
pReg = &pPrivData->pDeviceInfo->Channels[
ADT7461ChannelID_Remote].IntrLimitHigh;
if(!Adt7461WriteReg(pPrivData, pReg, Data))
goto fail;
Data = ADT7461_T_VALUE_TO_DATA(
ExtRange, ADT7461_T_RANGE_LIMIT_LOW(ExtRange));
pReg = &pPrivData->pDeviceInfo->Channels[
ADT7461ChannelID_Local].IntrLimitLow;
if(!Adt7461WriteReg(pPrivData, pReg, Data))
goto fail;
pReg = &pPrivData->pDeviceInfo->Channels[
ADT7461ChannelID_Remote].IntrLimitLow;
if(!Adt7461WriteReg(pPrivData, pReg, Data))
goto fail;
// Set initial rate
Data = ADT7461_INITIAL_RATE_SETTING;
pReg = &pPrivData->pDeviceInfo->Rate;
if(!Adt7461WriteReg(pPrivData, pReg, Data))
goto fail;
pPrivData->ShadowRate = Data;
// Set remote channel offset (8-bit 2's complement value for any range)
Data = ((NvU8)ADT7461_ODM_REMOTE_OFFSET_VALUE);
pReg = &pPrivData->pDeviceInfo->Channels[
ADT7461ChannelID_Remote].Toffset;
if(!Adt7461WriteReg(pPrivData, pReg, Data))
goto fail;
// Read ADT7461 status and ARA (clear pending Alert interrupt, if any)
pReg = &pPrivData->pDeviceInfo->Status;
if (!Adt7461ReadReg(pPrivData, pReg, &Data))
goto fail;
// TODO: check open remote circuit error
Adt7461ReadAra(pPrivData);
return NV_TRUE;
fail:
Adt7461FreePrivData(pPrivData);
hTmon->pPrivate = NULL;
return NV_FALSE;
}
